Publications
2008 Conference Proceedings
22nd Annual Conference on Fossil Energy Materials
July 8-10, 2008
Table of Contents
Disclaimer
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.
PRESENTATIONS
- Introduction and Opening Remarks
Robert Romanosky, National Energy Technology Laboratory
Session 1
- Development of Alumina-Forming Austenitic Stainless Steels
Yukinori Yamamoto, Oak Ridge National Laboratory
- Nanoprecipitates via Internal Oxidation
Joachim Schneibel, Oak Ridge National Laboratory
- Room-Temperature Ductility Enhancement of Mo Alloys with Nano-Sized Metal Oxide Dispersions
Bruce Kang, West Virginia University
- Update on the Status of ODS Alloys for Fossil Energy Applications
Ian Wright, Oak Ridge National Laboratory
- Control of Defects and Microstructure in ODS Alloys
Andrew Jones, University of Liverpool
- Oxide Dispersion Strengthened Alloys for Fossil Energy Applications
Bimal Kad, University of California - San Diego
- Development of Fireside Corrosion Models for Advanced Combustion Systems
Steve Kung, Babcock & Wilcox Company
Session 2
- Materials Performance in CO2 and CO2-Steam Environments
Ken Natesan, Argonne National Laboratory
- Steam Turbine Materials and Corrosion
Gordon Holcomb, National Energy Technology Laboratory
- Materials and Component Development for Advanced Turbine Systems
Mary Anne Alvin, National Energy Technology Laboratory
- Advanced Pressure Boundary Materials
Michael Santella, Oak Ridge National Laboratory
- Advanced Processing of Metallic Powders for Fossil Energy Applications
Iver Anderson, Ames Laboratory, Iowa State University
- Computational and Experimental Development of Novel High Temperature Alloys
Matthew J. Kramer, Ames Laboratory and Iowa State University
- Advanced Materials Research in the European Community
John Oakey, Cranfield University
Session 3
- Performance of Al-Rich Oxidation-Resistant Coatings for Fe-Base Alloys
Ying Zhang, Tennessee Technological University
- Development of Metallic Slurry Coatings
Beth Armstrong, Oak Ridge National Laboratory
- Development of Nondestructive Evaluation Methods for Thermal Barrier Coatings
J.G. Sun, Argonne National Laboratory
- Aluminide Coatings for Power Generation Applications
Ying Zhang, Tennessee Technological University
- Microstructure, Processing, Performance Relationships for High Temperature Coatings
Thomas Lillo, Idaho National Laboratory
- Computational Modeling and Assessment of NanoCoatings for UltraSupercritical Boilers
Kent Coleman, Electric Power Research Institute (EPRI)
Session 4
- Commercial Process for Silicon Carbide Fibrils
Richard Nixdorf, ReMaxCo Technologies, Inc.
- Development of a Porous Support for Thin Palladium Membranes
Stephen Paglieri, Los Alamos National Laboratory
- Sealing/Joining Technology for Gas Separation Membranes
K. Scott Weil, Pacific Northwest National Laboratory
- Integrated Design of Refractory Metal Based Alloys for Fossil Energy Applications
Omer Dogan, National Energy Technology Laboratory
- The Wear and Corrosion of the High Chrome Oxide Linings used in Air-Cooled, Slagging Coal Gasifiers
Cynthia Powell, National Energy Technology Laboratory
- Closing Remarks
Robert Romanosky, National Energy Technology Laboratory
NETL Conference Services Information
National Energy Technology Laboratory
Phone: (412) 386-6044
FAX: (412) 386-6486
E-mail: kimberly.yavorsky@netl.doe.gov
NOTE: The papers listed above are in Portable Document Format (PDF). It is recommended to use the Adobe Acrobat Reader 5.0 or newer from Adobe Systems, Inc. to view the Proceedings.
|
About NETL
E&P Technologies