|
MIL-STD-100G (Engineering Drawing Practices) and MIL-DTL-31000A (Technical Data Packages) were released 9 June 1997. The corresponding Data Item Descriptions have also been released.
To compensate for the problem with the supporting non-Government standards (NGSs), a paragraph has been placed in the documents for information. Following is the wording in MIL-DTL-31000A (similar words are in MIL-STD-100).
6.4.4 Reference to non-Government standards (NGSs). Very broad areas of the subject matter of MIL-STD-100 have been replaced by or incorporated into NGSs. Every effort was made to harmonize the technical content and availability of the applicable NGSs to the requirements of the various technical data package elements obtainable through MIL-DTL-31000A. However, users of this specification, especially during the earliest stages of initial issue, may find that some needed NGSs are not available or fail to support basic document preparation requirements. In order to overcome this condition the user should be prepared to detail the needed documentation practice directly in the statement of work (SOW). Past issues of documents, such as superseded revisions of MIL-STD-100, may be used in attempting to establish the needed detail for entry into the SOW."
There are pointers in the body of MIL-DTL-31000A and MIL-STD-100 to the guidance contained in the above paragraph.
For more information, contact Rex Powell, email: rpowell@pica.army.mil
FACT SHEET CALS Military Specifications and Standards that can be referenced in contracts without requesting waivers to the policy that steers the DoD away from using non-performance military specifications.
CALS International Standardization Initiative
SPECIFICATIONS & STANDARDS
MID-2 Metafile for Interactive Documents, Version 2 Application guide and draft performance specification for the encoding of interactive documents. (464k; March 1996)
MIL-HDBK-59B Notice of Cancellation
MIL-STD-963 Department Of Defense Standard Practice MIL-STD-963B (72Kb)
Associated DIDs (5Kb)
MIL-STD-100G DoD Standard Practice for Engineering Drawings (380k)
Note: MIL-STD-100G has been canceled and superseded by ASME-Y14.100, ASME-Y14.24, ASME-Y14.35M, AND ASME-Y14.34M
MIL-DTL-31000A Technical Data Package (132Kb)
Note: The current Revision is MIL-DTL-31000C
MIL-HDBK-9660A DoD Produced CD ROM Products - Guidance Only (257k; 30 Sep 96)
Note: The current revision is MIL-HDBK-9660B
MIL-PRF-28000A Digital Representation for Communication of Product Data: Application Subsets and Application Protocols (IGES)
Revision A (10 Feb 92) Amendment 1 (14 Dec 92)
Revision B (30 Sep 99)
(PDF format)
Note: The current revision is MIL-PRF-28000B
MIL-PRF-28003A Digital Representation for Communication of Illustration Data: CGM Application Profile Revision A (15 Nov 91)
Amendment 1 (14 Aug 92) (WordPerfect 5.0 format in a zipped "exe")
Note: The current revision is MIL-PRF-28003B
MIL-M-87268 Manuals, Interactive Electronic Technical; General Content, Style, Format, & User-Interaction Requirements (308k; 20 Nov 92)
Note: The current version is MIL-M-87268, Amendment 1, dated 15-JAN-2001
MIL-D-87269 Data Base, Revisable; Interactive Electronic Technical Manuals for Support of Orig. Issue (220k; 20 Nov 92)
Note: The current version is MIL-PRF-87269A, dated 01-OCT-1995 (Validated by Notice 1, dated 15-AUG-2000)
FIPS Pub 161-1 FIPS for Electronic Data Interchange (19 Apr 93)
Note: FIPS-Pub-161-1 has been superseded by FIPS-PUB-161-2 (29 April 96). Neither document has been adopted for use by DoD in accordance with the procedures in DoD 4120.24-M, DSP Policy and Procedure
RELATED SOURCES
NSSN Search for standards, and place an order with the organizations that provide the standards.
American National Standards Institute (ANSI) Search for non-government standards.
CGM Standards
Defense Standardization Program provides policy and guidance, standardization directories, handbooks, and databases, key points of contact, available training, upcoming conferences, answers to frequently asked questions, the "DSP Journal" and "DSP Journal Update", and links to other government and industry standardization-related Web sites
Defense Automated Printing Service : The Single Stock Point for Specifications and Standards at the Defense Automated Printing Service Detachment Office, Philadelphia, PA.
NTIS CALS library
IEEE Home Page
ISO Standards — French version available |
