5.3003.35 Combustion Appliance Venting System—Low Rise

Topic: 
Forced Air
Subtopic: 
System Assessment and Maintenance
Desired Outcome: 
Combustion products are properly vented to the outdoors
For supporting material, see Referenced Standards.
TitleSpecification(s)Objective(s)
5.3003.35a
Combustion air

Combustion supply/exhaust air opening will be in compliance with applicable NFPA NFPA National Fire Protection Association, www.nfpa.org standards or local code

Exhaust combustion products to the outdoors

Ensure work does not damage building

Protect workers and occupants from injury

5.3003.35b
Flue vent material

Flue vent material will be selected to prevent flue gas freezing and/or corrosion (using double wall, where necessary)

Cost-effective materials will be used when appropriate and allowable

Ensure durability of flue vent system

Ensure selected material is appropriate and cost-effective

5.3003.35c
Installation

Venting systems will be installed considering proper material, pitch, common venting, chimney liner, clearance, total equivalent length, and termination in accordance with NFPA NFPA National Fire Protection Association, www.nfpa.org 54, 31, 211

Category I venting systems will be installed in accordance with NFPA NFPA National Fire Protection Association, www.nfpa.org 54/ ANSI ANSI American National Standards Institute, www.ansi.org Z223.1

Category III and IV venting systems will be installed in accordance with the manufacturer specifications

Terminations will be located away from windows, doors, and walkways

Aesthetics and noise will be considered

Venting will be routed in the shortest and most direct path possible

Vent joints will be airtight and watertight

Exhaust combustion products to the outdoors

Ensure work does not damage building

Protect workers and occupants from injury

5.3003.35d
Orphaned equipment Orphaned equipment Condition when one smaller combustion appliance exists after being commonly vented with a larger appliance. What remains is a larger exhaust flue or chimney than is necessary for the remaining smaller appliance

Existing vent system or chimney will be resized or relined in accordance with the applicable NFPA NFPA National Fire Protection Association, www.nfpa.org standard when one or more common vented appliances are removed

Exhaust combustion products to the outdoors

Ensure work does not damage building

Protect workers and occupants from injury