Nuclear Engineering Division researchers have developed a number of large-scale computer codes for scientific and engineering applications. These codes are validated and maintained for application in a variety of nuclear energy research programs. |
Fast Reactor Cross Section Processing Codes
- ETOE-2 - A program for ENDF/B to MC22 data conversion
- MC2-2 - A code to calculate fast neutron spectra and multigroup cross sections
- SDX - A space dependent cross section generation capability
Diffusion and Transport Theory Codes
- DIF3D - DIF3D's nodal option solves the multigroup steadystate neutron diffusion and (for cartesian geometry only) transport equations in two- and three-dimensional hexagonal and cartesian geometries.
- DIF3DK - A Nodal Kinetics Code for Solving the Time-Dependent Diffusion Equation
- VIM - A continuous energy neutron and photon transport code
Fuel Cycle / Depletion Codes
- REBUS-3 - A system of codes designed for the analysis of reactor fuel cycles
- RCT - Post-processor for the depletion-dependent results of REBUS-3/DIF3D nodal calculations
- ORIGEN-RA - Modified version of the ORIGEN code developed by Oak Ridge National Laboratory to perform nuclide transmutation calculations based on the flux history computed with REBUS-3 and RCT
Perturbation Theory Codes
- VARI3D - Generalized perturbation theory code (computation of reactivity coefficient distributions and kinetics parameters)
Thermal-Hydraulic Codes
- SE2-ANL (SUPERENERGY2) - Modified version of the SUPERENERGY-2 thermal-hydraulic code
Reactor Dynamics and Safety Analysis Codes
- SAS4A - Software designed to perform deterministic analysis of severe accidents in liquid metal cooled reactors (LMRs)
- SASSYS-1 - Software designed to perform deterministic analysis of design basis and beyond-design basis accidents in liquid metal cooled reactor (LMR) plants
- SAS-DIF3DK - Software designed to perform deterministic analysis of coupled neutronics/thermal-hydraulic transients in water-cooled thermal reactors
Surveillance and Diagnostics Codes
- MSET - Software system for real-time process monitoring
- PRODIAG - Software environment for producing customized diagnostic systems for continuous thermal-hydraulic (T-H) processes
Acquired Codes
- TWODANT
- KENO
- WIMS
- DRAGON
- MCNP
- FIDAP
- RELAP5-Mod 3.2
Last Modified: Wed, September 21, 2011 12:04 PM