The objective of this research program is to continue research and
development on the use of chemical dispersants. The program contains
three separate tasks. Task 1. Calm Seas Application and Dispersant
Wash-Out
The Petroleum Environmental Research Forum (PERF) funded a research
project conducted by SINTEF in Norway and Cedre in France that has
looked at the same issue of dispersant wash out but at laboratory bench
scale. The Oseberg crude oil used in the PERF study was shipped to
Ohmsett and was used in the 2007 study (TAR Project 563). To date no
comparison of the findings from these two studies has been made. The
first item to be addressed in Task 1 will be to complete such a
comparison to determine what can be learned from the different test
methods and scales.
In the testing phase of Task 1 we will implement a similar test
protocol to that used in the spring 2007 testing. Multiple test rings
will be deployed across in the Ohmsett test tank so a range of slick
thickness and/or oil types can be monitored in one test sequence.
Dispersant wash out rates will be monitored throughout the test period
by sampling the surface oil and testing dispersant effectiveness (DE)
using a bench-scale test such as the WSL rotating flask method, as was
done successfully in the 2007 testing, as well as by measuring the
interfacial tension of the sampled oil with fresh sea-water. A two-week
testing program will be conducted May 19-30, 2008 at Ohmsett to test oil
thickness and oil type effects on dispersant wash-out.
Task 2. Surface Wave Energy Characterization for the Ohmsett Test
Tank
The objective of this project would be to measure the surface
turbulence at Ohmsett under various wave configurations and compare
these energies to those encountered in the field at specific sea-states.
There are three basic mixing energies of primary significance in the
dispersion process. These include the process that mixes dispersant into
the oil, the energy that breaks the treated oil into small droplets and
the larger scale energy that mixes the droplets of oil down into the
water column. The proposed work will focus on the quantification of the
surface turbulence available to break the treated slick into a
fine-drop, oil-in-water dispersion. Because of the shallow depth of the
Ohmsett tank the third mixing process cannot be fully simulated at
Ohmsett. The mixing of applied dispersant into the oil versus water is
an important short-term process but it is not the critical component
except where viscous oils or emulsions are involved. A two-week testing
program will be conducted August 18-29, 2008 at Ohmsett.
Task 3. Dispersant Effectiveness on Heavy California Oils
Dispersant effectiveness (DE) experiments were conducted on six
viscous Californian Outer Continental Shelf (OCS) crude oils in April of
2005 at Ohmsett to gather data on this subject. (TAR Project No. 514).
The crude oils tested with viscosities lower than 6500 cP were
dispersible to a significant degree whereas the oils with viscosities of
33,000 cP and greater were not. Oils with similar viscosities yielded
similar DE results suggesting that viscosity alone was a good measure of
likely DE, at least in this test series. Unfortunately oils with
viscosities between 6500 and 33,000 cP were not available for testing
during the 2005 study.
The objective of this project will be to obtain California OCS crude
oils with viscosities between 6,500 and 25,000 cSt and conduct
large-scale experiments at Ohmsett to determine the DE of dispersants in
this viscosity range to fill in the knowledge gap. A one-week testing
program will be conducted June 2-6, 2008 at Ohmsett.
|