|
CFSAN/Office of Food Additive Safety
February 2009
Under section 409(h)(2)(C) of the Federal Food, Drug, and Cosmetic Act (FFDCA) (21 U.S.C. 348 (h)(2)(C)) a notification is only effective for the manufacturer or supplier identified in the notification. Persons who market a food contact substance based on an effective notification must be able to demonstrate that the notification is effective for their food contact substance. All persons who purchase a food contact substance manufactured or supplied by a manufacturer or supplier identified in an effective notification may rely on that notification to legally market or use the food contact substance for the use that is the subject of the notification, consistent with any limitations in that notification. This table will be updated approximately monthly.
Contact Us | Access to Regulations |
FCN No. | Food Contact Substance (FCS) | Notifier
|
Intended Use | Limitations/ Specifi- cations |
Effective Date | Environ- mental Decision |
||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Manufacturer of the FCS |
||||||||||||||||||||||||||||||||
1 | Silver sodium hydrogen zirconium phosphate, rhombohedral framework
structure, of the general formula
AgxNayHzZr2(PO4)3 x=(0.1-0.5); y=(0.1-0.8); z=(0.1-0.8) |
Milliken & Company | Antimicrobial additive for polymeric food-contact materials | Limitations/
Specifi- cations |
Mar 1, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Toagosei Company, Ltd. | ||||||||||||||||||||||||||||||||
2 | GENOX TM EP, chemically identified as Amines, bis(hydrogenated rape-oil alkyl) methyl, N-oxides (CAS Reg. No. 204933-93-7) | GE Specialty Chemicals | An antioxidant and/or stabilizer | Limitations/
Specifi- cations |
Mar 9, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
GE Plastics | ||||||||||||||||||||||||||||||||
3 | Styrene-acrylic copolymers produced by polymerizing a minimum of 72 parts by weight of styrene with a minimum of 4 parts of methyl methacrylate and with up to 10 parts total of any one or more of the following monomers: butyl methacrylate, methacrylic acid, butyl acrylate, acrylic acid and allyl methacrylate | Rohm and Haas Company | As components of coatings for paper and paperboard in compliance with 21 CFR 176.170(b) | Limitations/
Specifi- cations |
Mar 9, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Rohm and Haas Company | ||||||||||||||||||||||||||||||||
4 | Isophthalic acid or dimethyl isophthalate | BP Amoco | As a monomer in the manufacture of ethylene terephthalate - isophthalate copolymers | Limitations/ Specifi- cations |
Mar 15, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
BP Amoco | ||||||||||||||||||||||||||||||||
5 | Polybutadiene - graft - poly(methyl acrylate- co- acrylonitrile) (CAS Reg. No. 27012-62-0) | BP Amoco Chemicals, Inc. | Fabricating beverage containers | Limitations/ Specifi- cations |
Mar 14, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
BP Amoco Chemicals, Inc. | ||||||||||||||||||||||||||||||||
6 | Completely hydrolyzed copolymer of acrylonitrile and trivinylcyclohexane ion-exchange resin (CAS Reg. No. 109961-42-4) | Rohm and Haas Company | Treating potable water | Limitations/ Specifi- cations |
Mar 17, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Rohm and Haas Company | ||||||||||||||||||||||||||||||||
7 | Woven wool felt | Applied Fabric Technologies, Inc. | As a component of conveyor belts in contact with raw dough bakery products such as bread and croissants | None | Mar 21, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Applied Fabric Technologies, Inc. | ||||||||||||||||||||||||||||||||
8 | Ethylene terephthalate- 2,6-naphthalate copolymers | Shell Chemicals Company | As the base sheet or base polymer for manufacturing food contact articles | Limitations/ Specifi- cations |
Mar 23, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
M&G Polymers USA, LLC | ||||||||||||||||||||||||||||||||
9 | Poly (oxy- 1,2-ethanediyloxycarbonyl- 2,6 -naphthalanedicarbonyl) homopolymer and copolymers with ethylene terephthalate | Shell Chemicals Company | As articles and films or components of articles and films in contact with food | Limitations/ Specifi- cations |
Mar 23, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
M&G Polymers USA, LLC | ||||||||||||||||||||||||||||||||
10 | Pyromellitic dianhydride | Sekisui Plastics, Ltd. | As a modifier for ethylene terephthalate copolymers identified in 21 CFR 177.1630(e)(4)(i), item 2, and complying with all applicable provisions of 21 CFR 177.1630 | Limitations/ Specifi- cations |
Mar 29, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Sekisui Plastics, Ltd. | ||||||||||||||||||||||||||||||||
11 | 4,5-dichloro- 2-n-octyl-3(2H)-isothiazolone | Rohm and Haas Company | As a preservative and slimicide in the manufacture of paper and paperboard intended to contact aqueous and fatty food. | Limitations/ Specifi- cations |
Apr 1, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Rohm and Haas Company | ||||||||||||||||||||||||||||||||
12 | Industrial starch modified by treatment with greater than 5% and not more than 21% by weight 2,3-epoxypropyl trimethylammonium chloride (CAS Reg. No. 3033-77-0) | Sveriges Starkelse- producenter | For use as a retention aid and/or drainage aid and/or dry-strength agent employed prior to the sheet-forming operation in the manufacture of food-contact paper and paperboard | Limitations/ Specifi- cations |
Mar 31, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Lyckeby Starkelsen Industrial Starches AB | ||||||||||||||||||||||||||||||||
13 | Dimethyl-2, 6-naphthalene dicarboxylate or 2,6-naphthalene dicarboxylic acid | BP Amoco Chemicals | As a chemically-bound component of ethylene terephthalate-2,6-naphthalate compolymers | Limitations/ Specifi- cations |
Mar 23, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
BP Amoco Chemicals | ||||||||||||||||||||||||||||||||
14 | Dimethyl-2, 6-naphthalene dicarboxylate or 2,6-naphthalene dicarboxylic acid | BP Amoco Chemicals | As a chemically-bound component of poly(oxy- 1,2-ethanediyloxy carbonyl- 2,6-naphthalenediyl carbonyl) homopolymer and copolymers with ethylene terephthalate | Limitations/ Specifi- cations |
Mar 23, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
BP Amoco Chemicals | ||||||||||||||||||||||||||||||||
15 | Benzenesulfonic acid, 2,2'- (1,2-ethenediyl)bis (5-((4-(bis(2-hydroxyethyl)amino)- 6-((4-sulfophyenyl)amino)-1,3,5-triazin-2-yl)amino)-, tetrasodium salt (CAS Reg. No. 16470-24-9) | Stilbene Whitening Agent Task Force | As an optical brightener in paper and paperboard. | Limitations/ Specifi- cations |
Apr 1, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Kemira Chemicals, Inc., Ciba Specialty Chemicals Corporation and Clariant Corporaion | ||||||||||||||||||||||||||||||||
16 | Cemented carbide formulated as follows: Tungsten Carbide(WC) - 95%, Carbides of titanium, tantalum and niobium - 5%, Cobalt(Co) - 0.5%-1% | AB Sandvik Hard Materials | For use in seal rings and bearings for food processing equipment including pumps. | Limitations/ Specifi- cations |
Apr 4, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Sandvik Hard Materials | ||||||||||||||||||||||||||||||||
17 | A perfluorocarbon-cured elastomer (PCE) produced by terpolymerizing tetrafluoroethylene (CAS Reg. No. 116-14-3), perfluoro (2,5-dimethyl- 3,6-dioxanone vinyl ether) (CAS Reg. No. 2599-84-0) and perfluoro (6,6-dihydro- 6-iodo- 3-oxa- 1-hexene) (CAS Reg. No. 106108-22-9) and subsequent curing of the terpolymer (CAS Reg. No. 106108-23-0) by crosslinking with triallylcyanurate (CAS Reg. No. 101-37-1) and vulcanizing with 2,5-dimethyl- 2,5-di (t-butylperoxy) hexane (CAS Reg. No. 78-63-7), as a 68% dispersion on finely divided silica | Greene, Tweed and Company, Inc. | In the fabrication of vulcanized molded parts for food processing equipment, such as o-rings, gaskets, diaphrams and other materials, that function primarily in sealing applications | Limitations/ Specifi- cations |
Mar 30, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Greene, Tweed and Company, Inc. | ||||||||||||||||||||||||||||||||
18 | Sodium acrylate/styrene sulfonate copolymer | Nalco Chemical Company | As an antiscalant boiler water treatment where steam from treated boilers may contact food. | Limitations/ Specifi- cations |
Apr 7, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Nalco Chemical Company | ||||||||||||||||||||||||||||||||
19 | Piperylene / 2-methyl-2-butene / alpha-methylstyrene terpolymers (Benzene, (1-methylethenyl)-, polymers with 2-methyl-2-butene and 1,3-pentadiene) (CAS Reg. No. 62258-49-5) | Goodyear Tire & Rubber Company | In the manufacture of can end cements complying with 21 CFR 175.300(b)(3)(xxxi) | Limitations/ Specifi- cations |
Mar 31, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Goodyear Tire & Rubber Company | ||||||||||||||||||||||||||||||||
20 | 2,2'-Methylenebis (4,6-di-tert- butylphenyl) 2-ethylhexyl phosphite (CAS Reg. No. 126050-54-2) | Asahi Denka Kogyo K.K. | As an antioxidant and/or stabilizer in linear low-density polyethylene articles intended for contact with food. | Limitations/ Specifi- cations |
Apr 7, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Asahi Denka Kogyo K.K. | ||||||||||||||||||||||||||||||||
21 | 2,2'-Methylenebis (4,6-di-tert- butylphenyl) 2-ethylhexyl phosphite (CAS Reg. No. 126050-54-2) | Asahi Denka Kogyo K.K. | As an antioxidant and/or stabilizer in high-density polyethylene articles intended for contact with food. | Limitations/ Specifi- cations |
Apr 7, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Asahi Denka Kogyo K.K. | ||||||||||||||||||||||||||||||||
22 | Phosphorous acid, cyclic neopentanetetrayl bis(2,6-di-tert-butyl-4-methylphenyl) ester (CAS Reg. No. 80693-00-1) | Adeka Corporation | As an antioxidant and/or stabilizer in high-density polyethylene homopolymer and copolymers articles intended for contact with food. | Limitations/ Specifi- cations |
Apr 8, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Adeka Corporation | ||||||||||||||||||||||||||||||||
23 | C.I. Pigment Red 277, a solid solution of 1- naphthalenesulfonic acid, 2-((2-hydroxy-6 -sulfo-1 -naphthalenyl)azo)-, stronium salt (1:1)(CAS Reg. No. 250639-69-1) and 2-naphthalenesulfonic acid, 5-((4-chloro-5 -ethyl- 2-sulfophenyl) azo)-6-hydroxy-, strontium salt (1:1)(CAS Reg. No. 197566-90-8) | Engelhard Corporation | As a colorant in food-contact polymers. The colorant is to be used in compliance with 21 CFR 178.3297. | Limitations/ Specifi- cations |
Apr 8, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Engelhard Corporation | ||||||||||||||||||||||||||||||||
24 | Tin-based alloy, ASTM B23-49 Grade 1, for filling bearings made from extruded or molded carbon and graphite, which has the following composition: Tin (Balance); Antimony (4.0-5.0%); Copper (4.0-5.0%); Lead (0.004% maximum); Iron (0.05% maximum); Aluminum (0.005% maximum); Zinc (0.005% maximum); Arsenic (0.005% maximum); Bismuth (0.005% maximum); Total other elements (<0.005% maximum). | Graphite Metallizing Corporation | For use to fill bearings, made from extruded or molded carbon and graphite, intended for use in pumps, baking ovens and equipment for transporting or handling of food products. | Limitations/ Specifi- cations |
May 13, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Grant Manufacturing and Alloying Inc. | ||||||||||||||||||||||||||||||||
25 | 1-naphthalenesulfonic acid, 2-((4,5-dihydro- 3-methyl-5- oxo-1- (3-Sulfophenyl)- 1H-pyrazol- 4-yl) azo)-, calcium and/or strontium salt (1:1)(C.I. Pigment Yellow 209 and C.I. Pigment Yellow 209:1) | BASF Corporation | As colorants for all polymers intended for food-contact applications. | Limitations/ Specifi- cations |
Apr 8, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
26 | A solid solution of 2-naphthalenesulfonic acid, 5-(((5-chloro -4-methyl-2- sulfophenyl) azo) -6-hydroxy)-, strontium salt (1:1) and 2-naphthalenesulfonic acid, 5-((4-chloro -5-ethyl -2-sulfophenyl) azo) -6-hydroxy)-, strontium salt(1:1) (C.I. Pigment Red 276) | BASF Corporation | As a colorant for polymers intended for food-contact applications. | Limitations/ Specifi- cations |
Apr 8, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
27 | C.I. Pigment Orange 79 (Benzoic acid, 4-((2-hydroxy- 6-sulfo-1 -naphthalenyl)azo) -strontium salt (2:1)) | Engelhard Corporation | As a colorant in all types of food-contact polymers. | Limitations/ Specifi- cations |
May 2, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Engelhard Corporation | ||||||||||||||||||||||||||||||||
28 | Hydrogenated styrene-butadiene block copolymers modified with maleic anhydride such that the basic polymers are composed of : 18 to 40 percent by weight of units derived from styrene, 58 to 80 percent by weight of units derived from hydrogenated 1,3-butadiene and 0.1 to 2 percent by weight of units derived from maleic anhydride. | Asahi Chemical Industry Co. | As a modifier (blending component) for polymers that are regulated in 21 CFR Part 177 or the subject of an effective notification. | Limitations/ Specifi- cations |
May 3, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Asahi Chemical Industry Co. | ||||||||||||||||||||||||||||||||
29 | Tridecanol phosphite condensation product with butylidenebis (2-(1,1-dimethylethyl) -5-methyl-4,1-phenylene) (CAS Reg. No. 13003-12-8) | Asahi Denka Kogyo K.K. | As an antioxidant and/or stabilizer in accordance with 21 CFR 178.2010 in styrene-isoprene-styrene (SIS) copolymer. | Limitations/ Specifi- cations |
Apr 19, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Asahi Denka Kogyo K.K. | ||||||||||||||||||||||||||||||||
30 | Copolymer of the sodium salt of acrylic acid with polyethyleneglycol allyl ether(CAS Reg. No. 137898-98-7) | BetzDearborn, Inc. | For use in boiler water additives complying with 21 CFR 173.310. | Limitations/ Specifi- cations |
Apr 11, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
BetzDearborn, Inc. | ||||||||||||||||||||||||||||||||
31 | Fluorescein, disodium salt or dipotassium salt (CAS Reg. No. 518-47-8) and (CAS Reg. No. 6417-85-2) | Nalco Chemical Co. | For use in boiler water additives complying with 21 CFR 173.310. | Limitations/ Specifi- cations |
May 11, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Nalco Chemical Co. | ||||||||||||||||||||||||||||||||
32 | Alpha- (dinonylphenyl) -omega -hydroxypoly (oxy-1, 2-ethanediyl) containing not more than 21 moles of ethylene oxide per mole of dinonylphenyl (CAS Reg. No. 9014-93-1) | BASF Corporation | As a stabilizer in calcium stearate dispersions used in the manufacture of paper coatings complying with 21 CFR 176.170(b). | Limitations/ Specifi- cations |
May 14, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
33 | Silica, ((ethenyldimethylsilyl) oxy)- and ((trimethylsilyl) oxy)-modified (CAS Reg. No. 68988-89-6) | Dow Corning Corporation | To be used in combination with siloxane and silicone coating components permitted for use under 21 CFR 175.300 (b) (3) (xxviii) to manufacture silicone paper coatings intended for use in contact with pressure-sensitive, self-stick labels and tapes to adjust the force required to release the label/tapes which are to be applied to food surfaces. | Limitations/ Specifi- cations |
May 18, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Dow Corning Corporation | ||||||||||||||||||||||||||||||||
34 | Nylon 6/12 resins manufactured by the copolymerization of at least 80 weight percent of epsilon-caprolactam and no more than 20 weight percent of omega-aminododecanoic acid. (CAS Reg. No. 25191-04-2) | UBE Industries, Ltd. | For use in the manufacture of multilaminate packaging films and not for use in direct contact with food. | Limitations/ Specifi- cations |
May 21, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
UBE Industries, Ltd. | ||||||||||||||||||||||||||||||||
35 | Dimethyl dicarbonate | LANXESS Corporation | As a microbial control agent in non-carbonated juice beverages containing up to and including 100 percent juice. | Limitations/ Specifi- cations |
June 9, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
LANXESS Corporation | ||||||||||||||||||||||||||||||||
36 | Gum rosin (CAS Reg. No. 8050-09-7) | Resinall Corporation | As a reactant in the production of polyester resins (such polyester resins to be otherwise made from materials regulated for production of such resins under 21 CFR 175.320) used as components of coatings applied to polypropylene (PP) films complying with 21 CFR 177.1520. | Limitations/ Specifi- cations |
June 4, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Resinall Corporation | ||||||||||||||||||||||||||||||||
37 | Dimethylolbutanoic acid, (CAS Name: butanoic acid, 2,2-bis (hydroxymethyl)-, (CAS Reg. No. 10097-02-6) | Perstorp Polyols, Inc. | As a monomer in the production of polyurethane resins used in adhesives complying with 21 CFR 175.105. | Limitations/ Specifi- cations |
June 3, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Perstorp Polyols, Inc. | ||||||||||||||||||||||||||||||||
38 | n-Octyl phosphonic acid (NOPA)-modified titanium dioxide (produced by chemically reacting NOPA (CAS Reg. No. 4724-48-5) with titanium dioxide to achieve a treatment level of 0.85 percent by weight of NOPA on the pigment). | Huntsman Tioxide | As a colorant in all types of food-contact polymers. | Limitations/ Specifi- cations |
June 3, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Huntsman Tioxide | ||||||||||||||||||||||||||||||||
39 | 1,2-Bis (3,5-di-tert-butyl -4 -hydroxyhydrocinnamoyl) hydrazine (CAS Reg. No. 32687-78-8) | Ciba Specialty Chemicals Corporation | As a stabilizer in polypropylene polymers and copolymers complying with 21 CFR 177.1520(c). | Limitations/ Specifi- cations |
July 22, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
40 | Polyphenylene sulfide polymers (CAS Reg. No. 25212-74-2 or 26125-40-6) | Ticona | As a polymeric component of repeated use food-contact articles. | Limitations/ Specifi- cations |
June 28, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Ticona | ||||||||||||||||||||||||||||||||
41 | Silicone acrylate resins produced by the addition of omega-hydroxyalkenes and/or propenyloxy -2,3-dihydroxypropane, mono- or diester with acrylic acid, acetic acid, or other saturated monocarboxylic acid, to dimethyl polysiloxane, methylhydrogen polysiloxane, or dimethyl-methylhydrogen polysiloxane. The cured resins may include substances permitted for use by regulation in 21 CFR 170-189, substances generally recognized as safe, substances used in accordance with prior sanction approval, and the following substances as photoinitiators: 2-hydroxy-2 -methyl-1-phenyl-1-propanone (CAS Reg. No. 7473-98-5) and/or oligomeric -2-hydroxy -2-methyl-1 -[4-(1-methylvinyl) phenyl] -1-propanone (CAS Reg. No. 163702-01-0). The total photoinitiator levels shall not exceed 3 percent by weight of silicone acrylate resin in coatings. | Goldschmidt Chemical Corporation | As coatings or components of coatings on polymeric substrates and on paper and paperboard, at a maximum level of 1.3 milligrams per square inch (mg/in2), in contact with all food types under conditions of use E, F, G, and H as defined in Table 2. | Limitations/ Specifi- cations |
June 7, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Goldschmidt Chemical Corporation | ||||||||||||||||||||||||||||||||
42 | A grafted copolymer of cross-linked sodium polyacrylate identified as 2-propenoic acid, polymers with N,N-di-2 propenyl -2-propen -1-amine and hydrolyzed polyvinyl acetate, sodium salts, graft (CAS Reg. No. 166164-74-5) | Stockhausen, Inc. | For use as an absorptive medium in absorbent pads employed in the packaging of refrigerated or frozen red meat. | Limitations/ Specifi- cations |
June 10, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Stockhausen, Inc. | ||||||||||||||||||||||||||||||||
43 | Nickel-iron alloy. Its composition is as follows: Ni (80-83 percent by weight), S (0-0.005 % by weight), C (0-0.005% by weight), Mo (1-3% by weight), Fe (14-19% by weight). | Marlen Research Corporation | Used in seals for food processing equipment. | Limitations/ Specifi- cations |
June 7, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Ametek Specialty | ||||||||||||||||||||||||||||||||
44 | Hexanedioic acid polymer with 1,3 -benzenedimethanamine meeting the specifications in 21 CFR 177.1500(b) item 10.2, when tested by the methods given in 21 CFR 177.1500(c) (CAS Reg. No. 25718-70-1). | Toyobo Co., Ltd. | As a modifier for polyethylene terephthalate (PET) polymers. | Limitations/ Specifi- cations |
June 6, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Toyobo Co., Ltd. | ||||||||||||||||||||||||||||||||
45 | Two quaternary amine (QAE) cellulose ion exchange resins (IXRs): (1) high substitution QAE cellulose IXR (1.5-2.5 milliequivalents quaternary ammonium per dry g of resin); and (2) high protein capacity QAE cellulose IXR (1.0-1.5 milliequivalents quaternary ammonium per dry g resin). Both IXRs consist of a base matrix of regenerated cellulose, cross-linked and alkylated with epichlorohydrin and propylene oxide. Dimethyl hydroxyethyl ammonium groups are added to the polymer to provide binding sites. | Life Technologies, Inc. | For use in the isolation and purification of protein concentrates and isolates from aqueous process streams for food processing. | Limitations/ Specifi- cations |
June 10, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Life Technologies, Inc. | ||||||||||||||||||||||||||||||||
46 | Salicylamide (CAS Reg. No. 65-45-2) | Lubrizol Corporation | For use as an anti-wear component of lubricants with incidental food contact. | Limitations/ Specifi- cations |
June 12, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Lubrizol Corporation | ||||||||||||||||||||||||||||||||
47 | Zeolite A in which silver, zinc and ammonium ions have been exchanged for sodium ions. The silver content of the modified zeolite shall not exceed 2.5 percent by weight. | Sinanen Company, Ltd. | As an antimicrobial additive in all types of food-contact polymers. | Limitations/ Specifi- cations |
June 9, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Sinanen Company, Ltd. | ||||||||||||||||||||||||||||||||
48 | Poly(ethylene-methyl acrylate-cyclohexenylmethyl acrylate) (CAS Reg. No. 223503-47-7). | Cryovac, Inc. | As a component of articles used in contact with dry food containing no surface fat or oil (i.e., food type VIII as described in Table 1) and as a component of multi-layer articles in contact with food. | Limitations/ Specifi- cations |
June 4, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Cryovac, Inc. | ||||||||||||||||||||||||||||||||
49 | Nylon 6 polymers produced using benzoic acid as a blocking agent. | Unitika Ltd. | The Nylon 6 polymers would be used for food-contact applications as described in 21 CFR 177.1500(b)(6.1) and (6.2). | Limitations/ Specifi- cations |
June 9, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Unitika Ltd. | ||||||||||||||||||||||||||||||||
51 | REPLACED BY FCN 232 | Limitations/ Specifi- cations |
||||||||||||||||||||||||||||||
52 | A high density agarose resin, crosslinked and alkylated with epichlorohydrin, followed by chemical binding of benzylamine. The agarose resin would be in the form of beads with a particle size of 100 to 300 um for not less than 90% of the particles. | Chr. Hansen A/S | As a chromatographic material for the isolation and purification of food enzymes. | Limitations/ Specifi- cations |
August 2, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
UpFront Chromatography A/S | ||||||||||||||||||||||||||||||||
53 | The substance is a mixture consisting of 63-72% oxidized bis(hydrogenated tallow alkyl) amines (CAS Reg. No. 143925-92-2), 12-15% bis (hydrogenated tallow alkyl) amines, 4-8% (hydrogenated tallow alkyl) nitrones, and 5-12% (hydrogenated tallow alkyl) oximes. | Ciba Specialty Chemicals Corporation | As an antioxidant and/or stabilizer in olefin polymers. | Limitations/ Specifi- cations |
June 15, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
54 | alpha -sulfo -omega-(dodecyloxy) poly (oxyethylene) sodium salt (CAS Reg. No. 9004-82-4). | Cognis Corporation | For use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard that contact aqueous and fatty foods. | Limitations/ Specifi- cations |
June 24, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Cognis Corporation | ||||||||||||||||||||||||||||||||
55 | Ion exchange resin which is a terpolymer of styrene, divinyl benzene and ethylvinyl benzene, aminomethylated, then quarternized with methyl chloride (CAS Reg. No. 113114-05-9). | LANXESS Corporation | For use in treating aqueous sugar solutions and hydrolyzed starch solutions. | Limitations/ Specifi- cations |
July 13, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
LANXESS Corporation | ||||||||||||||||||||||||||||||||
56 | Petroleum hydrocarbon resins (cyclopentadiene-type), hydrogenated (CAS Reg. Name Naptha (petroleum), light steam-cracked, debenzenized, polymers, hydrogenated (CAS Reg. No. 68132-00-3). | ExxonMobil Chemical Company | 1. As a component of adhesive formulations complying with 21 CFR 175.125; 2. As a component of resinous and polymeric coatings complying with 21 CFR 175.320; 3. As a component of can-end cement formulations complying with 21 CFR 175.300(b)(3)(xxxi); 4. As a component of coatings for paper and paperboard complying with 21 CFR 176.170 and 21 CFR 176.180; 5. As a component of adhesives for seals of food-contact, glass containers complying with 21 CFR 177.1210. | Limitations/ Specifi- cations |
August 24, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
ExxonMobil Chemical Company | ||||||||||||||||||||||||||||||||
57 | Aromatic modified aliphatic hydrocarbon resin. The FCS is also known as aromatic modified petroleum hydrocarbon resin. (CAS Reg. No. 68527-25-3). | ExxonMobil Chemical Company | 1. As a component of adhesive formulations complying with 21 CFR 175.105 and 21 CFR 175.125; 2. As a component of resinous and polymeric coatings complying with 21 CFR 175.320 applied to polyolefin films complying with 21 CFR 175.1520(c); 3. As a component of can-end cement formulations complying with 21 CFR 175.300(b)(3)(xxxi); 4. As a component of coatings for paper and paperboard complying with 21 CFR 176.170 and 21 CFR 176.180; 5. As a component of adhesives for seals of food-contact, glass containers complying with 21 CFR 177.1210 and 21 CFR 175.105. | Limitations/ Specifi- cations |
August 24, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
ExxonMobil Chemical Company | ||||||||||||||||||||||||||||||||
58 | 2,2'-Methylenebis (4,6-di-tert-butylphenyl) 2-ethylhexyl phosphite (CAS Reg. No. 126050-54-2). | Asahi Denka Kogyo K.K. | As an antioxidant and/or stabilizer in styrene-butadiene block polymers. | Limitations/ Specifi- cations |
June 29, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Asahi Denka Kogyo K.K. | ||||||||||||||||||||||||||||||||
59 | Glycine, N,N-bis[2-hydroxy -3-(2-propenyloxy) propyl]-, monosodium salt, reaction products with ammonium hydroxide and pentafluoroiodoethane-tetrafluoroethylene telomer (CAS Reg. No. 220459-70-1). | Ciba Specialty Chemicals Corporation | As a component of paper and paperboard in contact with nonalcoholic food. | Limitations/ Specifi- cations |
August 16, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
60 | GENOXTMEP, chemically identified as amines, bis(hydrogenated rape-oil alkyl)methyl, N-oxides (CAS Reg. No. 204933-93-7). | GE Specialty Chemicals | As an antioxidant in the manufacture of polypropylene homopolymer and copolymers complying with 21 CFR 177.1520. | Limitations/ Specifi- cations |
July 15, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
GE Specialty Chemicals | ||||||||||||||||||||||||||||||||
62 | Amorphous hydrogenated carbon coating produced from acetylene as the carbon source in a microwave plasma. The coating is formed at reduced pressure with 0.1 mbar using acetylene microwave energy, followed by an air rinse. | Sidel S.A. (ACTIS Technology) | A technology used to produce an amorphous hydrogenated carbon coating for food-contact containers to provide an improved barrier to permeation of the polyethylene terephthalate (PET) bottle by oxygen, carbon dioxide, and other substances. | Limitations/ Specifi- cations |
July 19, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Sidel S.A. (ACTIS Technology) | ||||||||||||||||||||||||||||||||
63 | Styrene block polymers with 2-methyl-1,3-butadiene and 1,3-butadiene, hydrogenated (CAS Reg. No.132778-07-5) in food contact applications. | Kuraray America, Inc., Kuraray Co., Ltd., Kuraray Europe, GmbH, and SEPTON Company of America | For use as a basic resin in food-contact articles. | Limitations/ Specifi- cations |
July 22, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Kuraray America, Inc., Kuraray Co., Ltd., Kuraray Europe, GmbH, and SEPTON Company of America | ||||||||||||||||||||||||||||||||
64 | Diallyldimethylammonium chloride polymer with acrylamide (CAS Reg. No. 26590-05-6). The copolymers are produced by copolymerizing diallyldimethylammonium chloride with acrylamide in weight ratios ranging from 85/15 to up to but not including 50/50 diallyldimethylammonium chloride/acrylamide. | Nalco Chemical Company | For use only as a drainage and/or retention aid employed prior to the sheet-forming operation in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
July 27, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Nalco Chemical Company | ||||||||||||||||||||||||||||||||
67 | 3,6,9-triethyl -3,6,9-trimethyl -1,2,4,5,7,8-hexoxonane (CAS Reg. No. 24748-23-0) . | Akzo Nobel Chemicals, Inc. | As a rheology modifier in the production of olefin polymers complying with either 21 CFR 177.1520 or 177.2600. | Limitations/ Specifi- cations |
August 2, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Akzo Nobel Chemicals, Inc. | ||||||||||||||||||||||||||||||||
68 | Butene-1, polymer with propylene (CAS Reg. No. 29160-13-2), containing more than 15 but not greater than 35 weight percent of polymer units derived from butene-1. | Mitsui Chemicals Inc. | In blends with polypropylene-based olefin polymers complying with 21 CFR 177.1520(c), items 1.1, 3.1 and 3.2, at levels not to exceed 30 weight percent of the total blend. | Limitations/ Specifi- cations |
July 27, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Mitsui Chemicals Inc. | ||||||||||||||||||||||||||||||||
69 | (1) Styrene -butadiene -methacrylic acid terpolymer (CAS Reg. No. 9010-93-9), (2) 1,2 -benzisothiazolin -3-one (CAS Reg. No. 2634-33-5), and (3) sulfosuccinic acid 4-ester with polyethylene glycol dodecyl ether, disodium salt (CAS Reg. No. 39354-45-5). | W.R. Grace, Ltd. | As components of can end cements. | Limitations/ Specifi- cations |
July 13, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
W.R. Grace, Ltd. | ||||||||||||||||||||||||||||||||
70 | Carbon monoxide-ethylene copolymer (CAS Reg. No. 111190-67-1); and Carbon monoxide - ethylene -propylene terpolymer (CAS Reg. No. 88995-51-1) containing no more than 8 mole-percent of propylene. | Shell Chemical Company | For use in articles intended for repeated-use in food processing establishments, for multilayer flexible packaging for refrigerated food products, and for reheatable or microwavable rigid retort packaging for food. | Limitations/ Specifi- cations |
July 14, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Shell Chemical Company | ||||||||||||||||||||||||||||||||
71 | Partially hydrolyzed (40-50%) polyvinyl alcohol, modified with up to 2 percent by weight crotonic acid (i.e. a terpolymer of vinyl acetate, vinyl alcohol and crotonic acid). | Harlow Chemical Company, Ltd. | For use as a secondary stabilizer in the suspension polymerization of polyvinyl chloride. | Limitations/ Specifi- cations |
July 28, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Harlow Chemical Company, Ltd. | ||||||||||||||||||||||||||||||||
72 | Ethylene terephthalate-isophthalate copolymers. | KoSa | As the base sheet in the manufacture of repeat-use food-contact articles intended to contact aqueous, acidic and low-alcohol food at temperatures 49°C. | Limitations/ Specifi- cations |
August 10, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
KoSa | ||||||||||||||||||||||||||||||||
73 | Epoxy resin coatings otherwise complying with 21 CFR 175.300(b)(3)(viii) that also contain polyoxypropylenediamine (CAS Reg. No. 9046-10-0) as a cross linking component. | Belzona, Inc. | As a coating that is intended for repeated use in contact with beer. | Limitations/ Specifi- cations |
August 17, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Belzona, Inc. | ||||||||||||||||||||||||||||||||
74 | Completely hydrolyzed tetra-polymer of divinyl benzene, ethyl vinyl benzene, acrylonitrile, and 1,7-octadiene as an ion exchange resin. (CAS Reg. No. 130353-60-5). | LANXESS Corporation | For use in demineralizing sugar solutions prior to recrystallization, and to soften water for food and beverage production. | Limitations/ Specifi- cations |
August 16, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
LANXESS Corporation | ||||||||||||||||||||||||||||||||
75 | Ethylene-2-norbornene copolymer (CAS Reg. No. 26007-43-2). The CAS nomenclature is bicyclo{2.2.1} hept-2-ene, polymer with ethene. | Topas Advanced Polymers Incorporated | To manufacture films, sheets, and articles made therefrom for food-contact applications; not for use in making bottles. | Limitations/ Specifi- cations |
August 22, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Topas Advanced Polymers Incorporated | ||||||||||||||||||||||||||||||||
76 | A modified, branched poly dimethyl hydrogen methylsiloxane (containing small amounts of trivinyl cyclohexane, CAS Reg. No. 2855-27-8), synthesized as described in the notification, from trivinylcyclohexane and sigma, omega' -dihydropolydimethyl siloxane with platinum catalysis followed by reaction with polyhydrogen methyl dimethylsiloxane. | Wacker Silicones/ Wacker Chemie GmbH | As a cross linking agent in the manufacture of poly dimethyl hydrogen methylsiloxane complying with 21 CFR 175.300 and 175.320 and intended for use: 1) as a component of food packaging articles; 2) in molds used to manufacture food-contact material; and 3) as a component of release coatings (a dehesive) for use with pressure-sensitive labels. | Limitations/ Specifi- cations |
August 24, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Wacker Silicones/ Wacker Chemie GmbH | ||||||||||||||||||||||||||||||||
78 | Sebacic acid (1,8-octanedicarboxylic acid, as a component of lubricants that otherwise comply with 21 CFR 178.3570 (CAS Reg. No. 111-20-6). | Lubrizol Corporation | Incidental food-contact lubricants made with sebacic acid (added as a corrosion inhibitor). | Limitations/ Specifi- cations |
August 31, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Lubrizol Corporation | ||||||||||||||||||||||||||||||||
79 | High silicon iron. The formulation is as follows:
|
Flowserve Corporation | Pump and pipe material used in transporting food. | Limitations/ Specifi- cations |
September 2, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Flowserve Corporation | ||||||||||||||||||||||||||||||||
80 | 2,6-di-tert-butyl -4-sec-butylphenol (CAS Reg. No. 17540-75-9). | Schenectady International, Inc. | As an antioxidant in plasticized PVC. | Limitations/ Specifi- cations |
September 20, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Schenectady International, Inc. | ||||||||||||||||||||||||||||||||
83 | Poly (oxy(1,1'-biphenyl) -4,4'-diyloxy -1,4-phenylenesulfonyl -1,4-phenylene) (CAS Reg. No. 25839-81-0). | BP Amoco Chemicals, Inc. | For repeated use in contact with food. | Limitations/ Specifi- cations |
September 23, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
BP Amoco Chemicals, Inc. | ||||||||||||||||||||||||||||||||
84 | Color Index (C.I.) Pigment Yellow 212 Chemical Name: Benzoic acid, 2-((4,5-dihydro -3-methyl -5-oxo -1-(3-sulfophenyl)-1H-pyrazol-4-yl)azo)-,strontium salt (1:1) (CAS Reg. No. 250640-73-4). | BASF Corporation | As a colorant in all food-contact polymers. | Limitations/ Specifi- cations |
October 3, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
85 | Polyethylene terephthalate copolyesters (diethylene glycol-isophthalate modified) prepared by the condensation of dimethyl terephthalate or terephthalic acid and ethylene glycol with one or more of the following: dimethyl isophthalate, isophthalic acid, and diethylene glycol. The finished polymer shall contain a total of not more than 10 mole-percent of diethylene glycol and isophthalate units, with the diethylene glycol content expressed as a mole-percent of the total glycol units and the isophthalate content expressed as a mole-percent of the total isophthalate/terephthalate units. | M&G Polymers USA, LLC; Eastman Chemical Company; E.I. duPont de Nemours & Co., DuPont Polyester Enterprise and DuPont Teijin Films; Wellman, Inc.; KoSa | For use as films or articles intended for contact with aqueous, acidic, low-alcohol, and fatty foods under Conditions of Use A through H as described in Table 2, and for use in contact with high-alcohol foods under conditions of use E through G as described in Table 2. | Limitations/ Specifi- cations |
October 5, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
M&G Polymers USA, LLC; Eastman Chemical Company; E.I. duPont de Nemours & Co., DuPont Polyester Enterprise and DuPont Teijin Films; Wellman, Inc.; KoSa | ||||||||||||||||||||||||||||||||
87 | 1,4 -cyclohexanedimethanol | Eastman Chemical Company | As a polyhydric alcohol for use in the manufacture of polyester resins intended for use in coatings complying with 21 CFR 175.300(b)(3)(vii)(c). | Limitations/ Specifi- cations |
October 7, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Eastman Chemical Company | ||||||||||||||||||||||||||||||||
88 | Terephthaloyl dichloride (CAS Reg. No. 100-20-9). | Huntsman Polyurethanes | As an acidifier or stabilizer for diphenyl methane-4,4'-diisocyanate prepolymer used in the manufacture of polyurethane for further manufacture of adhesives complying with 21 CFR 175.105. | Limitations/ Specifi- cations |
October 17, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Huntsman Polyurethanes | ||||||||||||||||||||||||||||||||
89 | Polyethylene glycol mono-isotridecyl ether sulfate, sodium salt (CAS Reg. No. 150413-26-6). | CONDEA Servo | As a surfactant in latex formulations used in pigment binders for paper and paperboard intended to contact aqueous, acidic, and low-alcohol foods. | Limitations/ Specifi- cations |
October 12, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
CONDEA Servo | ||||||||||||||||||||||||||||||||
90 | Epoxy resin coatings otherwise complying with 21 CFR 175.300(b)(3)(viii) that also contain 9,10-anthracenedione, 1-hydroxy -4-((4-methylphenyl) amino)- (C.I. Solvent Violet 13) as a pigment (CAS Reg. No. 81-48-1). | Belzona, Inc. | As a coating that is intended for repeated use in contact with beer. | Limitations/ Specifi- cations |
August 17, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Belzona, Inc. | ||||||||||||||||||||||||||||||||
91 | Epoxy resin coatings otherwise complying with 21 CFR 175.300(b)(3)(viii) that also contain 1-(2-aminoethyl) piperazine as a crosslinking component (CAS Reg. No. 140-31-8). | Belzona, Inc. | As a coating that is intended for repeated use in contact with beer. | Limitations/ Specifi- cations |
August 17, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Belzona, Inc. | ||||||||||||||||||||||||||||||||
92 | Trimethylolpropane (CAS Reg. No. 77-99-6). | Kerr-McGee Chemical, LLC | Milling aid and dispersant for pigments used as components of food-contact articles. | Limitations/ Specifi- cations |
October 25, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
LANXESS Corporation and Polioli s.p.a. | ||||||||||||||||||||||||||||||||
93 | Vinyl neodecanoate (CAS Reg. No. 51000-52-3). | Resolution Performance Products, LLC | As the monomeric component of vinyl neodecanoate homopolymers and as the comonomer in copolymers manufactured using the monomers listed under the substance heading entitled "Polymers: Homopolymers and copolymers of the following monomers" in 21 CFR 175.105(c)(5) and 21 CFR 176.180(b)(2). The finished homopolymers and copolymers would be used as components of adhesive formulations complying with 21 CFR 175.105 and as components of coatings of paper and paperboard complying with 21 CFR 176.180. | Limitations/ Specifi- cations |
November 7, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Resolution Performance Products, LLC | ||||||||||||||||||||||||||||||||
96 | Polyoxymethylene copolymer (CAS Reg. No. 24969-26-4) produced from the reaction of trioxane (cyclic trimer of formaldehyde) and 1,3-dioxolane. | Mitsubishi Engineering-Plastics Corp. | As a component of articles intended for repeat use complying with 21 CFR 177.2470. | Limitations/ Specifi- cations |
November 22, 2000 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
Mitsubishi Engineering-Plastics Corp. | ||||||||||||||||||||||||||||||||
97 | Polyethylene glycol (400) monooleate (CAS Reg. No. 9004-96-0). | BetzDearborn, Inc. | As an anti-corrosive agent in the steam header and steam lines of boiler systems in which the steam will contact food. | Limitations/ Specifi- cations |
November 23, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
BetzDearborn, Inc. | ||||||||||||||||||||||||||||||||
98 | 2-Propenoic acid, 2-methyl, monoester with 1,2-propanediol, polymer with methyl 2-propenoate, 2-propenoic acid and sodium 2-propenoate (CAS Reg. No. 117675-55-5), manufactured and characterized as described in the notification. | Ciba Specialty Chemicals Corp. | As a fluid absorbent in food-contact materials. | Limitations/ Specifi- cations |
December 8, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Technical Absorbents, Inc. | ||||||||||||||||||||||||||||||||
99 | Hydroxymethyl-5,5-dimethylhydantoin (MMDMH)(CAS Reg. No. 27636-82-4), mixture with 1,3-bis(hydroxymethyl)-5,5-dimethylhydantoin (DMDMH) (CAS Reg. No. 6440-58-0). | Lonza, Inc. | As adjuvants in the bleaching of recycled paper and paperboard intended to contact food. | Limitations/ Specifi- cations |
December 9, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Lonza, Inc. | ||||||||||||||||||||||||||||||||
100 | Polyvinyl alcohol (CAS Reg. No. 9002-89-5), manufactured as described in the FCN. | Agway, Inc. | As a component of coatings applied to fruits and vegetables with inedible peels, excluding citrus fruits. | Limitations/ Specifi- cations |
December 15, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
Agway, Inc. | ||||||||||||||||||||||||||||||||
101 | Perfluorocarbon cured elastomers produced by polymerizing perfluoro(methyl vinyl ether) (CAS Reg. No. 1187-93-5) with tetrafluoroethylene (CAS Reg. No. 116-14-3) and perfluoro(8-cyano -5-methyl -3,6-dioxa -1-octene) (CAS Reg. No. 69804-19-9), followed by curing with trimethylallyl isocyanurate (CAS Reg. No. 6291-95-8) and/or triallyl isocyanurate (CAS Reg. No. 1025-15-6), and with 2,5 -dimethyl -2,5-di (t-butylperoxy) hexane (CAS Reg. No. 78-63-7) and as further described in this notification. | DuPont Performance Elastomers L.L.C. | For use in the fabrication of articles intended for repeated use in contact with food. | Limitations/ Specifi- cations |
December 19, 2000 | EA/ FONSI | ||||||||||||||||||||||||||
DuPont Performance Elastomers L.L.C. | ||||||||||||||||||||||||||||||||
102 | Phenol, 2-(1,1-dimethylethyl)-6-methyl-4-(3-((2,4,8,10-tetrakis(1,1-dimethylethyl)dibenzo(d,f)(1,3,2)dio xaphosphepin-6-yl)oxy)propyl) (CAS Reg. No. 203255-81-6). | Sumitomo Chemical Company, Ltd. | As an antioxidant and/or stabilizer for olefin polymers for use in contact with food. | Limitations/ Specifi- cations |
February 27, 2001 | EA/ FONSI | ||||||||||||||||||||||||||
Sumitomo Chemical Company, Ltd. | ||||||||||||||||||||||||||||||||
103 | Copolymers produced by the polymerization of 6-hydroxy-2-naphthoic acid with one or more of the following monomers: 4-hydroxybenzoic acid; 4,4'-biphenol; N-(4-hydroxyphenyl)acetamide; terephthalic acid; resorcinol; and isophthalic acid such that a minimum of 55 percent of the polymer units are derived from 6-hydroxy-2-naphthoic acid alone or in combination with 4-hydroxybenzoic acid, not more than 25 percent of the polymer units are derived individually from 4,4'-biphenol, N-(4-hydroxyphenyl)acetamide and terephthalic acid, and not more than 15 percent of the polymer units are derived individually from resorcinol and isophthalic acid. The copolymers should be manufactured and characterized as described in the notification. | Ticona | In the production of films, sheets and articles made therefrom used in the fabrication of food packaging materials. Does not include use of the food contact substance in the manufacture of bottles intended for food-contact applications. | Limitations/ Specifi- cations |
February 21, 2001 | EA/ FONSI | ||||||||||||||||||||||||||
Ticona | ||||||||||||||||||||||||||||||||
104 | Hydroxymethyl-5,5-dimethylhydantoin (DMDMH) (CAS Reg. No. 27636-82-4), mixture with 1,3-bis(hydroxymethyl)-5,5-dimethylhydantoin (MMDMH) (CAS Reg. No. 6440-58-0). | Lonza, Inc. | As preservatives for mineral (pigment) slurries (clay, kaolin clay, calcium carbonate or titanium dioxide) that are used as components of paper coatings used in the manufacture of food-contact paper and paperboard and as preservatives in mineral slurries of calcium carbonate or titanium dioxide that are used as fillers in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
February 27, 2001 | EA/ FONSI | ||||||||||||||||||||||||||
Lonza, Inc. | ||||||||||||||||||||||||||||||||
105 | Sodium acrylate/styrene sulfonate copolymer. | Nalco Chemical Company | As an antiscalant boiler water treatment where steam from treated boilers may contact food. | Limitations/ Specifi- cations |
February 3, 2001 | EA/ FONSI | ||||||||||||||||||||||||||
Nalco Chemical Company | ||||||||||||||||||||||||||||||||
106 | Styrene/ butadiene/ acrylonitrile copolymers (SBAN) (CAS Reg. No., exclusive of minor monomers, is 9003-56-9), copolymerized with not more than 10 percent of one or more of the monomers of acrylic acid, fumaric acid, 2-hydroxyethyl acrylate, itaconic acid and methacrylic acid, manufactured according to the method described in this notification. | The Dow Chemical Company | As a component of paper and paperboard in contact with aqueous and fatty foods, complying with 21 CFR 176.170(b)(2). | Limitations/ Specifi- cations |
December 27, 2000 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
The Dow Chemical Company | ||||||||||||||||||||||||||||||||
107 | Polyethylene glycol (CAS Reg. No. 25322-68-3). | Mitsubishi Engineering-Plastics Corp. | As a lubricant in repeat use poly oxymethylene copolymers as described in FCN 96. | Limitations/ Specifi- cations |
November 22, 2000 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
Mitsubishi Engineering-Plastics Corp. | ||||||||||||||||||||||||||||||||
109 | ((1,2,5,6-eta.) -1,5-cyclooctadiene) bis((4-(trimethylsilyl) phenyl)ethynyl)-platinum (CAS Reg. No. 234112-62-0). | Wacker Silicones Corporation | The platinum catalyst is used at low levels in the polymerization of precursors leading to the formation of silicone elastomers in repeated-use applications that contact food. | Limitations/ Specifi- cations |
January 24, 2001 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
Wacker Silicones Corporation | ||||||||||||||||||||||||||||||||
110 | Nitrile rubber-modified acrylonitrile-methyl acrylate copolymers (CAS Name: Polybutadiene-graft-poly(methyl acrylate-co-acrylonitrile), CAS Reg. No. 27012-62-0). | BP Chemicals, Inc. | For use in fabricating beverage containers and in film or sheet packaging. | Limitations/ Specifi- cations |
February 17, 2001 | EA/ FONSI | ||||||||||||||||||||||||||
BP Chemicals, Inc. | ||||||||||||||||||||||||||||||||
111 | 2-Methyl-4-isothiazolin-3-one (CAS Reg. No. 2682-20-4) as a 20 percent solution. | Thor GmbH | As an antimicrobial agent in adhesives and in components of adhesives for food-contact articles. As an antimicrobial agent in coating formulations and in additives used in the manufacture of paper and paperboard intended for use in contact with all food types. | Limitations/ Specifi- cations |
February 20, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Thor GmbH | ||||||||||||||||||||||||||||||||
112 | Tris (2,4-di-tert-butylphenyl)phosphite (CAS Reg. No. 31570-04-4). | Ciba Specialty Chemicals Corp. | For use as a stabilizer in olefin copolymers described in 21 CFR 177.1520(a)(3)(iii) and meeting the specifications in 21 CFR 177.1520(c), item 3.4. | Limitations/ Specifi- cations |
February 20, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corp. | ||||||||||||||||||||||||||||||||
113 | 2,4-dimethyl-6-(1-methylpentadecyl)phenol (CAS Reg. No. 134701-20-5). | Ciba Specialty Chemicals Corp. | As a stabilizer for flexible polyvinyl chloride films. | Limitations/ Specifi- cations |
February 20, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corp. | ||||||||||||||||||||||||||||||||
115 | 2,9-bis(3,5-dimethylphenyl)anthra(2,1,9-def:6,5,10-d'e'f')diisoquinoline-1,3,8,10(2 H, 9H)-tetrone (C.I. Pigment Red 149; CAS Reg. No. 4948-15-6). | BASF Corporation | As a colorant for all polymers intended for use in contact with food. | Limitations/ Specifi- cations |
May 9, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
116 | Benzene propanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy, C13-C15 branched and linear alkyl esters (CAS Reg. No. 171090-93-0). | Great Lakes Chemical Corp. | As a stabilizer in food-contact polymers. | Limitations/ Specifi- cations |
March 15, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Great Lakes Chemical Corp. | ||||||||||||||||||||||||||||||||
117 | Styrene-butyl acrylate copolymers. | Rohm and Haas Company | Components of coatings for paper and paperboard in compliance with 21 CFR 176.170(b). | Limitations/ Specifi- cations |
May 17, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Rohm and Haas Company | ||||||||||||||||||||||||||||||||
118 | 2,9-bis(4-(phenylazo)phenyl)anthra (2,1,9-def:6,5,10-d'e'f')diisoquinoline-1,3,8,10(2H, 9H)-tetrone (C.I. Pigment Red 178; CAS Reg. No. 3049-71-6). | BASF Corp. | As a colorant for all polymers intended for use in contact with food. | Limitations/ Specifi- cations |
March 9, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
BASF Corp. | ||||||||||||||||||||||||||||||||
119 | Xanthan Gum (CAS Reg. No. 11138-66-2). | Avecia Inc. | As a thickener in antimicrobial formulations for use in food packaging adhesives. | Limitations/ Specifi- cations |
March 21, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Avecia Inc. | ||||||||||||||||||||||||||||||||
123 | Polyester-epoxy-urethane adhesives formulated from: 1. Polyester resins described in 21 CFR 177.1390(c)(2)(v)(a). 1,6-Hexanediol may also be used as an optional polyhydric alcohol. 2. Optional epoxy resin listed in 21 CFR 175.300(b)(3)(viii)(a) and comprising up to 30 percent by weight of the cured adhesive. 3. Urethane cross-linking agent, as described in 21 CFR 177.1390(c)(2)(v)(c). 4. Optional trimethoxysilane coupling agents containing epoxy and/or ether groups not to exceed 3 percent by weight of the cured adhesive. | Toyo-Morton, Limited | The FCS may be used as an adhesive for laminate constructions intended for packaging all food types, except those containing more than 8 percent alcohol. The FCS may be used only for construction of retort pouches intended for use at a maximum temperature 135°C (275°F). The FCS may also be used as permitted by other regulatory clearances which incorporate by reference, materials cleared in 21 CFR 177.1390 provided such use is in retort pouch applications. | Limitations/ Specifi- cations |
April 11, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Toyo-Morton, Limited | ||||||||||||||||||||||||||||||||
124 | Styrene block copolymers with 1,3-butadiene, containing not less than 71 weight percent of polymer units derived from styrene, to which may be optionally added octadecyl 3,5-di-tert-butyl-4-hydroxyhydrocinnamate (CAS Reg. No. 2082-79-3) at levels not to exceed 0.25 percent by weight of the styrene block polymer. | ATOFINA Petrochemicals, Inc. | As articles or components of articles intended for contact with all types of food. | Limitations/ Specifi- cations |
July 4, 2001 | EA/ FONSI | ||||||||||||||||||||||||||
ATOFINA Petrochemicals, Inc. | ||||||||||||||||||||||||||||||||
125 | Polyphenylene ether (CAS Reg. No. 25134-01-4). | SABIC Innovative Plastics | To be used as a component of adhesives (at a use level of 3-7 percent by weight) that are in compliance with 21 CFR 175.105, which are used to attach tapes and labels to boxes or other paper or paperboard packages that contain food items. Single use is intended. | Limitations/ Specifi- cations |
April 27, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
126 | 1,9-Decadiene,3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-, polymer with tetrafluoroethene and trifluoro(trifluoromethoxy)ethene (CAS Reg. No. 190062-24-9), manufactured and characterized as further described in the notification. | Solvay Solexis S.p.A. | As a gasket or seal for food processing equipment. | Limitations/ Specifi- cations |
July 21, 2001 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
Solvay Solexis S.p.A. | ||||||||||||||||||||||||||||||||
127 | 1-Propene,1,1,2,3,3,3-hexafluoro-, polymer with 1,1-difluoroethene and tetrafluoroethene (CAS Reg. No. 25190-89-0) modified with triallyl isocyanurate and 3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-1,9-diene, manufactured and characterized as further described in the notification. | Solvay Solexis S.p.A. | As a gasket or seal for food processing equipment. | Limitations/ Specifi- cations |
July 21, 2001 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
Solvay Solexis S.p.A. | ||||||||||||||||||||||||||||||||
128 | A copolymer of tetrafluoroethylene (TFE) and perfluoromethylvinyl ether (PFMVE) (CAS Reg. No. 26425-79-6) modified with 1,3,5-triallyl isocyanurate (TAIC) and 3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-1,9-diene, manufactured and characterized as further described in the notification. | Solvay Solexis S.p.A. | As a gasket or seal for food processing equipment. | Limitations/ Specifi- cations |
July 21, 2001 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
Solvay Solexis S.p.A. | ||||||||||||||||||||||||||||||||
129 | Ethene, tetrafluoro-, polymer with 1,1-difluoroethene and trifluoro(trifluoromethoxy)ethene (CAS Reg. No. 56357-87-0) modified with 1,3,5-triallyl isocyanurate (TAIC) and 3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-1,9-diene, manufactured and characterized as further described in the notification. | Solvay Solexis S.p.A. | As a gasket or seal for food processing equipment. | Limitations/ Specifi- cations |
July 21, 2001 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
Solvay Solexis S.p.A. | ||||||||||||||||||||||||||||||||
130 | Styrene-acrylic copolymers. | BASF Corporation | Components of printing inks or coatings for paper and paperboard. | Limitations/ Specifi- cations |
May 3, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
131 | 2-Methyl-4-isothiazolin-3-one (CAS Reg. No. 2682-20-4). | Rohm and Haas Company | 1. As an antimicrobial agent for adhesives and components of adhesives used in accordance with 21 CFR 175.105. 2. as an antimicrobial agent for polymer latex emulsions in paper coatings complying with 21 CFR 176.170(b) at a level not to exceed 250 ppm (based on 2-methyl-4-isothiazolin-3-one), and 3. as an antimicrobial agent for finished paper and paperboard coating formulations complying with 21 CFR 176.170(b) and for additives used in the manufacture of paper and paperboard complying with 21 CFR 176.170 including latex emulsions, fillers, binders, pigment slurries, and sizing solutions at a level not to exceed 150 ppm (based on 2-methyl-4-isothiazolin-3-one) in the individual additives and not to exceed 150 ppm in the finished coating formulation. | None | April 17, 2001 | CAT. EXCL. 21 CFR 25.32 (q) |
||||||||||||||||||||||||||
Rohm and Haas Company | ||||||||||||||||||||||||||||||||
132 | Quino(2,3-b)acridine-7, 14-dione,4,11-dichloro-5,12-dihydro- (CAS Reg. No. 3089-16-5). | Ciba Specialty Chemicals Corp. | As a colorant in all types of food-contact polymers. | Limitations/ Specifi- cations |
May 19, 2001 | EA/FONSI | ||||||||||||||||||||||||||
Ciba Specialty Chemicals Corp. | ||||||||||||||||||||||||||||||||
133 | Bis-1,2-((N,N-diacetyl)amino-)ethane (CAS Reg. No. 10543-57-4). | Warwick International, Ltd. | As a bleaching agent in the manufacture of food-contact paper and paperboard products complying with 21 CFR 176.170. | Limitations/ Specifi- cations |
May 30, 2001 | EA/FONSI | ||||||||||||||||||||||||||
Warwick International, Ltd. | ||||||||||||||||||||||||||||||||
134 | Sodium zeolite A (CAS Reg. No. 68989-22-0). | John G. Blumbert, Esquire | As a costabilizer for polyvinyl chloride plastics intended for single and repeated use in contact with food, at levels not to exceed 5 percent by weight of the finished food-contact article. | Limitations/ Specifi- cations |
May 30, 2001 | CAT. EXCL. 21 CFR 25.32 (i) and (j) |
||||||||||||||||||||||||||
PQ Corporation | ||||||||||||||||||||||||||||||||
135 | Dimethyl-2,6-naphthalene dicarboxylate (NDC, CAS Reg. No. 840-65-3) or 2,6-naphthalene dicarboxylic acid (NDA, CAS Reg. No. 1141-38-4). | BP Amoco Chemical Company | As a chemically bound component in poly(ethylene terephthalate-isophthalate-2,6-naphthalate) (PET/I/N) copolymers. The PET/I/N copolymers will be used to manufacture articles or films intended for single serve or repeat use at temperatures up to and including Conditions of Use C through H as described in Table 2, in contact with food types I, II, IV-B, VI-A, VI-B, VII-B, and VIII as defined in Table 1. | Limitations/ Specifi- cations |
May 30, 2001 | Contact | ||||||||||||||||||||||||||
BP Amoco Chemical Company | ||||||||||||||||||||||||||||||||
137 | Anthranilamide. The Chemical Abstracts Service (CAS) name is 2-aminobenzamide (CAS Reg. No. 88-68-6). | Coca-Cola Co., ColorMatrix Corp. and KoSa | As a scavenger for acetaldehyde in polyethylene terephthalate (PET) beverage bottles. | Limitations/ Specifi- cations |
June 6, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Coca-Cola Co., ColorMatrix Corp. and KoSa | ||||||||||||||||||||||||||||||||
140 | A mixture of Peroxyacetic Acid, Acetic Acid, Hydrogen Peroxide, and 1-Hydroxyethylidene-1,1-Diphosphonic Acid (HEDP). | Ecolab Inc. | As an antimicrobial agent for red meat carcasses. | Limitations/ Specifi- cations |
June 15, 2001 | EA/FONSI | ||||||||||||||||||||||||||
Ecolab Inc. | ||||||||||||||||||||||||||||||||
141 | Cross-linked terpolymer of 1-vinylimidazole,1-vinylpyrrolidone and 1,3-divinylimidazolidinone (CAS Reg. No. 87865-40-5). The FCS is also known as Polyvinylimidazol. | Gordon Burns and Robert Ellsworth | As a component of matrix filter sheets, for removal of metals and sulfides in alcoholic beverages using repeat-usage filtering equipment. | Limitations/ Specifi- cations |
July 10, 2001 | EA/ FONSI | ||||||||||||||||||||||||||
Gordon Burns and Robert Ellsworth | ||||||||||||||||||||||||||||||||
142 | Silicones and siloxanes, dimethyl, methylhydrogen, reaction products with polyethylene glycol monoallyl ether acetate (CAS Reg. No. 70914-12-4). | Dow Corning Corporation | As a defoaming agent in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
July 19, 2001 | EA/ FONSI | ||||||||||||||||||||||||||
Dow Corning Corporation | ||||||||||||||||||||||||||||||||
143 | Octadecanoic acid, methyl ester, reaction products with 1-(2-hydroxy-2-methylpropoxy)-2,2,6,6-tetramethyl-4-piperidinol (CAS Reg. No. 300711-92-6). | Ciba Specialty Chemicals Corporation | For use as a light stabilizer in polypropylene polymers and copolymers, and polyethylene polymers and copolymers (with a density not less than 0.94 grams per cubic centimeter), complying with 21 CFR 177.1520. | Limitations/ Specifi- cations |
July 20, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
144 | 5-sulfo-1,3-benzenedicarboxylic acid, monosodium salt (CAS Reg. No. 6362-79-4). | Eastman Chemical Company | As a monomer to be copolymerized with monomers listed in 21 CFR 175.300(b)(3)(vii) to prepare polyester resins that may be used as coatings or components of coatings on any substrate contacting dry foods with surfaces containing no free fat or oil. | Limitations/ Specifi- cations |
July 25, 2001 | CAT. EXCL. 21 CFR 25.32 (I) and (j) |
||||||||||||||||||||||||||
Eastman Chemical Company | ||||||||||||||||||||||||||||||||
145 | Ethylene phthalate polymers identified in 21 CFR 177.1630(e)(4)(i) and 177.1630(e)(4)(ii), items 2 and 3, 177.1637 and FCN numbers 4, 13, 14, and 135 modified with 1,2,4,5-benzenetetracarboxylic dianhydride (pyromellitic dianhydride (PMDA)) (CAS Reg. No. 89-32-7). | BP Amoco Chemical Company | As a component of ethylene phthalate polymers complying with 21 CFR 177.1630(e)(4)(i) and in 177.1630(e)(4)(ii), items 2 and 3, and FCN Numbers 4, 13, 14, and 135, and ethylene naphthalate polymers complying with 21 CFR 177.1637. | Limitations/ Specifi- cations |
July 31, 2001 | Contact | ||||||||||||||||||||||||||
ColorMatrix Group Inc. | ||||||||||||||||||||||||||||||||
146 | Poly-1-butene polymers (CAS Reg. No. 009003-28-5) and butene/ethylene copolymers (CAS Reg. No. 25087-34-7) as identified in 21 CFR 177.1570(a). | Basell Polyolefins N.V. | As articles or components of articles intended to contact food. | Limitations/ Specifi- cations |
August 2, 2001 | EA/FONSI | ||||||||||||||||||||||||||
Basell Polyolefins N.V. | ||||||||||||||||||||||||||||||||
147 | Ethylene phthalate polymers identified in 21 CFR 177.1630(e)(4)(i) and 177.1630(e)(4)(ii), items 2 and 3, 177.1637 and FCN numbers 4, 13, 14, 135 and 145 modified with polybutadienediol (PBD) (CAS Reg. Name: 1,3-Butadiene, homopolymer, hydroxy-terminated) (CAS Reg. No. 69102-90-5). | BP Amoco Chemical Company | As a component of ethylene phthalate polymers complying with 21 CFR 177.1630(e)(4)(i) and in 177.1630(e)(4)(ii), items 2 and 3, and FCN Numbers 4, 13, 14, 135 and 145, and ethylene naphthalate polymers complying with 21 CFR 177.1637. | Limitations/ Specifi- cations |
August 4, 2001 | Contact | ||||||||||||||||||||||||||
ColorMatrix Group Inc. | ||||||||||||||||||||||||||||||||
148 | 2-Acrylamido-2-methylpropanesulfonic acid, in its free acid form (CAS Reg. No. 15214-89-8), and its sodium (CAS Reg. No. 5165-97-9), calcium (CAS Reg. No. 95176-15-1), potassium (CAS Reg. No. 52825-28-2), ammonium (CAS Reg. No. 58374-69-9), and lithium (CAS Reg. No. 77817-87-9) salts. | Lubrizol Corporation | The FCS will be used as a comonomer in the production of homopolymers and copolymers polymerized with other monomers listed in 21 CFR 175.105(c)(5) and 21 CFR 176.180(b)(2) under the subcategory for "Polymers: Homopolymers and copolymers of the following monomers" or with other monomers authorized for use in the manufacture of polymers intended for use in adhesives or in paper and paperboard intended to contact dry foods. The finished FCS will be used as components of adhesives complying with the provisions of 21 CFR 175.105 and as components of paper and paperboard in contact with dry foods complying with the provisions of 21 CFR 176.180. | Limitations/ Specifi- cations |
August 7, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Lubrizol Corporation | ||||||||||||||||||||||||||||||||
150 | Quinacridone red (Alternate names: (1) Quino(2,3-b)acridine-7,14-dione, 5, 12-dihydro- and (2) C.I. Pigment violet 19, C.I. 73900) (CAS Reg. No. 1047-16-1). | Ciba Specialty Chemicals Corporation | As a colorant in paper and paperboard. | Limitations/ Specifi- cations |
August 24, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
151 | Pyromellitic dianhydride (CAS Reg. No. 89-32-7). | Gruppo Mossi & Ghisolfi | The FCS will be used as a modifier for polyethylene phthalate polymers prepared by the condensation of dimethyl terephthalate or terephthalic acid and dimethyl isophthalate or isophthalic acid with ethylene glycol. | Limitations/ Specifi- cations |
August 29, 2001 | Contact | ||||||||||||||||||||||||||
Gruppo Mossi & Ghisolfi | ||||||||||||||||||||||||||||||||
155 | Silicon dioxide (CAS Reg. No. 7631-86-9). | Tetra Pak, Inc. | The FCS will be used as an amorphous plasma-deposited silicon coating on the food-contact surface of polyethylene terephthalate (PET) food packaging articles. | Limitations/ Specifi- cations |
August 31, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Tetra Pak, Inc. | ||||||||||||||||||||||||||||||||
156 | Cellulose, regenerated polymer with epichlorohydrin, carboxymethyl 2-hydroxypropyl ether (CAS Reg. No. 343844-23-5). The FCS is also referred to as carboxymethyl (CM) ion exchange cellulose resin. | Invitrogen Corporation | The CM ion exchange cellulose resin is used to isolate and purify soluble protein from aqueous process streams for food processing. | Limitations/ Specifi- cations |
September 4, 2001 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
Invitrogen Corporation | ||||||||||||||||||||||||||||||||
157 | 1. Cellulose, regenerated, polymer with epichlorohydrin, 2-(diethylamino) ethyl 2-hydroxypropyl ether, (CAS Reg. No. 343845-30-7) (High Capacity). The FCS is also referred to as diethylaminoethyl (DEAE) ion exchange cellulose resin (High Capacity). 2. Cellulose, regenerated, polymer with epichlorohydrin, 2-(diethylamino) ethyl ether, (CAS Reg. No. 343846-01-5) (Medium Capacity). The FCS is also referred to as diethylaminoethyl (DEAE) ion exchange cellulose resin (Medium Capacity). | Invitrogen Corporation | The DEAE ion exchange resins are used to isolate and purify soluble proteins from aqueous process streams for food processing. | Limitations/ Specifi- cations |
September 13, 2001 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
Invitrogen Corporation | ||||||||||||||||||||||||||||||||
161 | Piperylene/2-methyl-2-butene copolymer resins (CAS Reg. No. 26813-14-9) and Piperylene/2-methyl-2-butene/alpha-methylstyrene terpolymer resins (CAS Reg. No. 62258-49-5), and as further described in the identity and manufacturing sections of the notification. | The Goodyear Tire & Rubber Company | As components of pressure-sensitive adhesives used as the food-contact surface of labels and tapes as provided in 21 CFR 175.125 Pressure-sensitive adhesives. | Limitations/ Specifi- cations |
October 2, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
The Goodyear Tire & Rubber Company | ||||||||||||||||||||||||||||||||
162 | 2-Propenoic acid, methyl ester, telomer with 1-dodecanethiol, C16-C18 alkyl esters (CAS Reg. No. 174254-23-0). | Goldschmidt Chemical Corporation | As a stabilizer and/or dispersant for olefin polymers intended for use in contact with food. The FCS may also be used in accordance with food additive regulations and effective notifications which incorporate by reference materials cleared in 21 CFR 177.1520, 178.2010, and 178.3725, provided such use is in olefin polymers. | Limitations/ Specifi- cations |
October 4, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Goldschmidt Chemical Corporation | ||||||||||||||||||||||||||||||||
163 | A mixture of ca. 49 percent by weight of polyethylene glycol (400) monooleate and ca. 34 percent by weight of polyethylene glycol (400) dioleate. | Lonza, Inc. | The FCS will be used as an anti-corrosive agent in the steam header and steam lines of boiler systems where the steam will contact food. | Limitations/ Specifi- cations |
October 11, 2001 | EA/ FONSI | ||||||||||||||||||||||||||
Lonza, Inc. | ||||||||||||||||||||||||||||||||
164 | Phenol, 2-(5-chloro-2H-benzotriazol-2-yl)-4,6-bis(1,1-dimethylethyl)- (CAS Reg. No. 3864-99-1). | Ciba Specialty Chemicals | As an ultraviolet light absorber in polyethylene phthalate polymers. | Limitations/ Specifi- cations |
October 16, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals | ||||||||||||||||||||||||||||||||
165 | Polyphenylene sulfide (CAS Reg. No. 25212-74-2 or 26125-40-6). | Polyplastics | Component of repeated use food-contact articles. | Limitations/ Specifi- cations |
October 16, 2001 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
Polyplastics and Kureha | ||||||||||||||||||||||||||||||||
166 | Aromatic petroleum hydrocarbon resin, hydrogenated (CAS Reg. No. 88526-47-0), produced by the catalytic polymerization of aromatic substituted olefins from low boiling distillates of cracked petroleum stocks with a boiling point no greater than 220°C (428°F), and the subsequent catalytic reduction of the resulting aromatic petroleum hydrocarbon resin. | Arakawa Chemical Industries, Ltd. | As a component in blends with other polymers that are used in the manufacture of food-contact materials. | Limitations/ Specifi- cations |
November 13, 2001 | EA/ FONSI | ||||||||||||||||||||||||||
Arakawa Chemical Industries, Ltd. | ||||||||||||||||||||||||||||||||
168 | An approximately 1:1 ratio mixture of hydroxymethyl-5,5-dimethylhydantoin (MMDMH) (CAS Reg. No. 27636-82-4) and 1,3-bis(hydroxymethyl)-5,5-dimethylhydantoin (DMDMH) (CAS Reg. No. 6440-58-0), containing up to 8.5 percent by weight dimethylhydantoin. | Lonza, Inc. | As adjuvants in the bleaching of recycled paper and paperboard. | Limitations/ Specifi- cations |
November 28, 2001 | EA/ FONSI | ||||||||||||||||||||||||||
Lonza, Inc. | ||||||||||||||||||||||||||||||||
172 | 5,7-bis(1,1-dimethylethyl)-3-hydroxy-2(3H)-benzofuranone, reaction products with o-xylene (CAS Reg. No. 181314-48-7). | Ciba Specialty Chemicals | As an antioxidant and/or stabilizer for adhesives and polymers. | Limitations/ Specifi- cations |
December 11, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals | ||||||||||||||||||||||||||||||||
173 | Polyacrylic acid homopolymer, or copolymer of acrylic acid and up to 10 percent alkyl (C10-C30) methacrylate, crosslinked with either allyl sucrose (CAS Reg. No. 68784-14-5) or allyl pentaerythritol (CAS Reg. No. 91648-24-7); optionally contains up to 7 percent block copolymer surfactant of fatty acid (C12-C18) and polyethylene glycol. | Lubrizol Advanced Materials | As a thickener for hand sanitizers intended for use in food service establishments. | Limitations/ Specifi- cations |
February 16, 2002 | EA/ FONSI | ||||||||||||||||||||||||||
Lubrizol Advanced Materials | ||||||||||||||||||||||||||||||||
174 | Copolymers produced by the polymerization of 6-hydroxy-2-naphthoic acid and 4-hydroxybenzoic acid. The copolymers have the CAS name 2-naphthalenecarboxylic acid, 6-hydroxy-, polymer with 4-hydroxybenzoic acid (CAS Reg. No. 81843-52-9). The copolymers should be manufactured and characterized as described in the notification. | Polyplastics | In the production of films, sheets and articles made therefrom, and in molded articles in contact with food. Does not include use of the food contact substance in the manufacture of bottles intended for beverages or similar food-contact applications. | Limitations/ Specifi- cations |
December 20, 2001 | EA/ FONSI | ||||||||||||||||||||||||||
Polyplastics | ||||||||||||||||||||||||||||||||
175 | 2-Pyridinethiol-1-oxide, sodium salt (CAS Reg. No. 3811-73-2). | Arch Chemicals, Inc. | To be used as an antimicrobial agent in adhesives and in components of adhesives in paper towels for use in contact with aqueous and fatty foods. | Limitations/ Specifi- cations |
February 7, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Arch Chemicals, Inc. | ||||||||||||||||||||||||||||||||
176 | Phenol, 2-(1,1-dimethylethyl)-6-methyl-4-(3-((2,4,8,10-tetrakis(1,1-dimethylethyl)dibenzo(d,f)(1,3,2)dio xaphosphepin-6-yl)oxy)propyl)(CAS Reg. No. 203255-81-6). | Sumitomo Chemical Company, Ltd. | As an antioxidant and/or stabilizer for olefin polymers for use in contact with food. | Limitations/ Specifi- cations |
December 27, 2001 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Sumitomo Chemical Company, Ltd. | ||||||||||||||||||||||||||||||||
177 | Aluminum lithium carbonate hydroxide trihydrate (CAS Reg. No. 150607-28-6). | Mizusawa Industrial Chemicals, Ltd., Tokyo, Japan | As an additive in the production of polypropylene complying with 21 CFR 177.1520 Olefin polymers. | Limitations/ Specifi- cations |
February 19, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Mizusawa Industrial Chemicals, Ltd., Tokyo, Japan | ||||||||||||||||||||||||||||||||
178 | Polylactide polymers (CAS Reg. No. 9051-89-2). The polymers will be manufactured and characterized as described in the notification. | NatureWorks LLC | As components of articles intended to contact food. | Limitations/ Specifi- cations |
January 3, 2002 | EA/ FONSI | ||||||||||||||||||||||||||
NatureWorks LLC | ||||||||||||||||||||||||||||||||
179 | Copolymers and polymers made from the reaction of dimethyl terephthalate or terephthalic acid with a mixture containing 99 to 0 mole percent of ethylene glycol and 1 to 100 mole percent of 1,4-cyclohexanedimethanol (70 percent trans isomer, 30 percent cis isomer). The FCS is further identified as follows: Ethylene-1,4-cyclohexylenedimethylene terephthalate copolymers (CAS Reg. No. 25640-14-6), manufactured from dimethylterephthalate (DMT), ethylene glycol (EG), and 1,4-cyclohexanedimethanol (CHDM). Ethylene-1,4-cyclohexylenedimethylene terephthalate copolymers (CAS Reg. No. 25038-91-9), manufactured from terephthalic acid (TPA), EG, and CHDM. 1,4-cyclohexylenedimethylene terephthalate copolymers (CAS Reg. No. 25135-20-0), manufactured with DMT and CHDM. 1,4-cyclohexylenedimethylene terephthalate copolymers (CAS Reg. No. 25037-99-4), manufactured with TPA and CHDM. | Eastman Chemical Company | The FCS will be used as films or articles or components of films or articles, in either a non-oriented or oriented finished form, intended for contact with aqueous, acidic, low-alcohol (up to 13 percent by volume), and fatty foods under Conditions of Use C through G as described in Table 2, and for use in foods containing up to 25 percent, by volume, alcohol under conditions of use E through G as described in Table 2. | Limitations/ Specifi- cations |
January 3, 2002 | EA/ FONSI | ||||||||||||||||||||||||||
Eastman Chemical Company | ||||||||||||||||||||||||||||||||
180 | Benzenesulfonic acid, 2,2'-(1,2-ethenediyl)bis(5-((4-(bis(2-hydroxyethyl)amino)-6-((4-sulfophenyl)amino)-1,3,5-triazin -2-yl)amino)-, tetrasodium salt (CAS Reg. No. 16470-24-9). | 3V, Inc. | As an optical brightener in paper and paperboard. | Limitations/ Specifi- cations |
March 6, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
3V, Inc. | ||||||||||||||||||||||||||||||||
181 | Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-,octadecyl ester (CAS Reg. No. 2082-79-3). The FCS is also known as octadecyl 3,5-di-tert-butyl-4-hydroxyhydrocinnamate. | Ciba Specialty Chemicals | As a stabilizer for flexible polyvinyl chloride (PVC). The FCS is added to vinyl chloride monomer during the polymerization process. | Limitations/ Specifi- cations |
January 15, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals | ||||||||||||||||||||||||||||||||
182 | Polyamidoamine-ethyleneimine-epichlorohydrin resin prepared by reacting hexanedioic acid, 1,2-ethanediamine, N-(2-aminoethyl)-1,3-propanediamine, N,N"-1,2-ethanediylbis-1,3-propanediamine, (chloromethyl)oxirane, ethyleneimine(aziridine), and polyethylene glycol, and partly neutralized with sulfuric acid (CAS Reg. No. 167678-43-5) or formic acid (CAS Reg. No. 114133-44-7). | BASF Corporation | For use as a retention aid employed prior to the sheet-forming operation in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
January 17, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
BASF AG/BASF Corporation | ||||||||||||||||||||||||||||||||
183 | Butanedioic acid, dimethyl ester, polymer with 4-hydroxy-2,2,6,6-tetramethyl-1-piperidineethanol (CAS Reg. No. 65447-77-0). | Ciba Specialty Chemicals | For use as a stabilizer for rubber articles complying with 21 CFR 177.2600 (Rubber articles intended for repeated use). | Limitations/ Specifi- cations |
January 26, 2002 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals | ||||||||||||||||||||||||||||||||
184 | Phenol, 2-(2H-benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl)- (CAS Reg. No. 70321-86-7). | Ciba Specialty Chemicals Corp. | For use as a stabilizer in rubber articles intended for repeat use complying with 21 CFR 177.2600. | Limitations/ Specifi- cations |
January 26, 2002 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corp. | ||||||||||||||||||||||||||||||||
185 | Amorphous hydrogenated carbon coating produced from acetylene as the carbon source in a radio-frequency plasma as described in the notification. | Mitsubishi Shoji Plastics Corp. | As a coating on the interior of polyethylene terephthalate (PET) bottles used in single-use food-contact applications. | Limitations/ Specifi- cations |
January 29, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Mitsubishi Shoji Plastics Corp. | ||||||||||||||||||||||||||||||||
186 | Cis-endo-bicyclo(2.2.1)heptane-2,3-dicarboxylic acid, disodium salt (CAS Reg. No. 351870-33-2). | Milliken Chemical, Division of Milliken & Co. | As a nucleating agent in polypropylene and high density polyethylene, including homopolymers and copolymers, and in linear low density polyethylene polymers. | Limitations/ Specifi- cations |
January 30, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Milliken Chemical, Division of Milliken & Co. | ||||||||||||||||||||||||||||||||
187 | Fluorinated polyurethane anionic resin (CAS Reg. No. 328389-91-9) prepared by reacting perfluoropolyether diol (CAS Reg. No. 88645-29-8), isophorone diisocyanate (CAS Reg. No. 4098-71-9), 2,2-dimethylolpropionic acid (CAS Reg. No. 4767-03-7), and triethylamine (CAS Reg. No. 121-44-8). | Solvay Solexis S.p.A. | As a water and oil repellent in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
March 23, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Solvay Solexis S.p.A. | ||||||||||||||||||||||||||||||||
189 | Di-(para-methylbenzylidene)sorbitol (CAS Reg. No. 54686-97-4, 197809-37-3 and 81541-12-0) containing up to 1 percent triisopropanolamine. | Ciba Specialty Chemicals Corporation | As a clarifying agent for polypropylene homopolymers complying with 21 CFR 177.1520(c) Items 1.1a and 1.1b | Limitations/ Specifi- cations |
May 24, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
190 | Copolymers of methyl methacrylate, acrylonitrile, butadiene and styrene (CAS Reg. No. 9010-94-0). The polymers will be manufactured and characterized as described in the notification. | SABIC Innovative Plastics | As components of repeated-use food-contact articles. | Limitations/ Specifi- cations |
February 16, 2002 | CAT. EXCL. 21 CFR 25.32 (j) |
||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
191 | Hydrolized tetraethyl silicate (CAS Reg. No. 68412-37-3) | Wacker Chemie/Wacker Silicones | As a component of a cork primer used to aid in the adherence of silicone coatings to wine bottle closures. | Limitations/ Specifi- cations |
April 20, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Wacker Chemie/Wacker Silicones | ||||||||||||||||||||||||||||||||
192 | 12H-dibenzol(d,g)(1,3,2)dioxaphosphocin, 2,4,8,10-tetrakis(1,1-dimethylethyl)-6-((2-ethylhexyl)oxy)- (CAS Reg. No. 126050-54-2). | Asahi Denka Kogyo K.K. | As an antioxidant and/or a stabilizer in rubber modified polystyrene. | Limitations/ Specifi- cations |
February 27, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Asahi Denka Kogyo K.K. | ||||||||||||||||||||||||||||||||
193 | Silver zinc zeolite, a mixture of silver-magnesium-zinc-calcium phosphate sodium alumino silicate, zinc oxide (CAS Reg. No. 1314-13-2), and hydrotalcite (CAS Reg. No. 12304-65-3). | Ciba Specialty Chemicals Corp. | The FCS will be used as an antimicrobial agent in all types of food-contact polymers. | Limitations/ Specifi- cations |
March 6, 2002 | CAT. EXCL. 21 CFR 25.32 (i) and (j) |
||||||||||||||||||||||||||
Kanebo Chemical Industries, Ltd. | ||||||||||||||||||||||||||||||||
194 | Di-tert-amyl peroxide (CAS Reg. No. 10508-09-5). | Crompton Corporation | For use as a molecular weight modifier in the manufacture of polypropylene complying with 21 CFR 177.1520(a)(1), propylene copolymers complying with 21 CFR 177.1520(a)(3)(i), or propylene copolymers complying with applicable Food Contact Notifications. | Limitations/ Specifi- cations |
March 6, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Crompton Corporation | ||||||||||||||||||||||||||||||||
195 | Diphosphoric acid, polymers with ethoxylated reduced Me esters of reduced polymerized oxidized tetrafluoroethylene (CAS Reg. No. 200013-65-6). This substance is also known as: phosphate esters of ethoxylated perfluoroether, prepared by reaction of ethoxylated perfluoroether diol (CAS Reg. No. 162492-15-1) with phosphorous pentoxide (CAS Reg. No. 1314-56-3) or pyrophosphoric acid (CAS Reg. No. 2466-09-3). | Solvay Solexis S.p.A. | As a water and oil repellent in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
May 14, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Solvay Solexis S.p.A. | ||||||||||||||||||||||||||||||||
196 | 1-Dodecene (CAS Reg. No. 112-41-4). | Wacker Chemie/Wacker Silicones | The FCS will be used in the manufacture of a vinyl-functional resin, which is a component of a primer used to aid in the adherence of silicone coatings to corks used as wine bottle closures. | Limitations/ Specifi- cations |
May 14, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Wacker Chemie/Wacker Silicones | ||||||||||||||||||||||||||||||||
197 | Copolymers (polyurethanes) produced from 4,4'-methylenebis(cyclohexylisocyanate), polytetramethylene glycol, and polyethylene glycol (CAS Reg. No. 375387-19-2). | UCB Films PLC | As coatings on cellophane film. | Limitations/ Specifi- cations |
March 8, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
UCB Films PLC | ||||||||||||||||||||||||||||||||
198 | A copolymer of dimethyl terephthalate (CAS Reg. No. 120-61-6), 1,3-dimethyl-5-sulfo-1,3-benzenedicarboxylate, sodium salt (CAS Reg. No. 3965-55-7), and 1,6-hexanediol (CAS Reg. No. 629-11-8). | Teijin Ltd. | The FCS will be used as a nucleating agent in (a) polyethylene terephthalate (PET) polymers complying with 21 CFR 177.1630 and (b) polyethylene terephthalate (PET) polymers complying with the specifications in 21 CFR 177.1630(f) for which there is an effective food contact notification. | Limitations/ Specifi- cations |
March 13, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Teijin Ltd. | ||||||||||||||||||||||||||||||||
199 | A mixture of imidazolium and imidazoline compounds, 9-Octadecenoic acid (9Z)-, reaction products wirh diethylenetriamine, cyclized, diethyl sulfate quaternized (CAS Reg. No. 68511-92-2) and Amides, C18 and C18unsaturated, N-(2-(2-(C17 and C17unsaturated alkyl)-4,5-dihydro-1H-imidazol-1-yl)ethyl) (CAS Reg. No. 71808-32-7). | Hercules Inc. | As a debonding agent in food-contact paper and paperboard at levels up to 0.5 percent by weight of the dry paper and paperboard. The FCS may also be used in accordance with food additive regulations and effective notifications which incorporate by reference materials cleared in 21 CFR 176.170 and 176.180. | Limitations/ Specifi- cations |
April 20, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Hercules Inc. | ||||||||||||||||||||||||||||||||
200 | Pyromellitic dianhydride (CAS Reg. No. 89-32-7). | Gruppo Mossi & Ghisolfi | As a modifier for ethylene phthalate polymers identified in 21 CFR 177.1630(e)(4)(i) 21 CFR 177.1630(e)(4)(ii), items 2 and 3; poly(ethylene terephthalate-2,6-naphthalate) polymers identified in FCN numbers 8 and 9; poly(oxy-1,2-ethanediyloxycarbonyl-2,6-naphthalanedicarbonyl) polymers identified in 21 CFR 177.1637 and FCN 9, and polyethylene terephthalate-isophthalate-2,6-naphthalate) polymers identified in FCN 135. | Limitations/ Specifi- cations |
March 20, 2002 | Contact | ||||||||||||||||||||||||||
Nippon Shokubai Co. Ltd. Gruppo Mossi & Ghisolfi |
||||||||||||||||||||||||||||||||
201 | 2H-benzimidazole-2-thione, 1,3-dihydro-, 4(or 5)-methyl-, zinc salt(2:1) containing up to 4 percent by weight petroleum process oil. | R. T. Vanderbilt Company, Inc. | As an antioxidant synergist in natural or synthetic rubber gloves intended for repeat use in the meat packing industry. | Limitations/ Specifi- cations |
May 30, 2002 | EA/ FONSI | ||||||||||||||||||||||||||
R. T. Vanderbilt Company, Inc. | ||||||||||||||||||||||||||||||||
202 | Aluminum, hydroxybis(2,4,8,10-tetrakis(1,1-dimethylethyl)-6-hydroxy-12H-dibenzol(d,g)(1,3,2)dioxaphosphocin 6-oxidato)-, (CAS Reg. No. 151841-65-5). The FCS will be manufactured and characterized as described in the notification. | Asahi Denka Kogyo K.K. | For use as a clarifying and nucleating agent in polypropylene polymers and copolymers complying with 21 CFR 177.1520(c), items 1.1, 3.1 and 3.2. | Limitations/ Specifi- cations |
May 4, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Asahi Denka Kogyo K.K. | ||||||||||||||||||||||||||||||||
203 | Acetic acid ethenyl ester, polymer with alpha-hydro-omega-hydroxypoly(oxy-1,2-ethanediyl), hydrolyzed. | Harlow Chemical Company, Ltd. | As a secondary stabilizer in the suspension polymerization of polyvinyl chloride. | Limitations/ Specifi- cations |
May 24, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Harlow Chemical Company, Ltd. | ||||||||||||||||||||||||||||||||
204 | A mixture of the lithium salts of stearic acid (69.5 weight percent), palmitic acid (25.8 weight percent), myristic acid (1.6 weight percent), arachidonic acid (1 weight percent), and other carboxylic acids (2.1 weight percent). | Asahi Denka Kogyo K.K. | The FCS will be used as a stabilizer in polypropylene and olefin copolymers for use in food containers. | Limitations/ Specifi- cations |
May 28, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Asahi Denka Kogyo K.K. | ||||||||||||||||||||||||||||||||
206 | Copolymer of 2-perfluoroalkylethyl acrylate, 2-N,N-diethylaminoethyl methacrylate, and glycidyl methacrylate. | DuPont Chemical Solutions Enterprise | The FCS will be used as an oil and grease-resistant treatment for paper and paperboard intended for food-contact use. | Limitations/ Specifi- cations |
June 12, 2002 | EA/ FONSI | ||||||||||||||||||||||||||
DuPont Chemical Solutions Enterprise | ||||||||||||||||||||||||||||||||
208 | Acetic acid ethenyl ester, polymer with ethenol and dimethyl maleate (DMM). This material is equivalent to poly(vinyl acetate-vinyl alcohol) (CAS Reg. No. 25213-24-5), polymerized with DMM (CAS Reg. No. 624-48-6)). | Harlow Chemical Co. Ltd. | As a stabilizer in the suspension polymerization of polyvinyl chloride (PVC). | Limitations/ Specifi- cations |
April 3, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
Harlow Chemical Co. Ltd. | ||||||||||||||||||||||||||||||||
211 | Isophthalic acid (CAS Reg. No. 121-91-5). | Eastman Chemical Company | As a monomer in the manufacture of ethylene terephthalate-isophthalate copolymers. | Limitations/ Specifi- cations |
May 25, 2002 | EA/ FONSI | ||||||||||||||||||||||||||
Eastman Chemical Company | ||||||||||||||||||||||||||||||||
212 | 2-Cyano-3,3-diphenyl-2-propenoic acid ethyl ester (CAS Reg. No. 5232-99-5). | BASF Aktiengesellschaft | The FCS will be used as an ultraviolet-stabilizer for polyvinyl chloride (PVC). | Limitations/ Specifi- cations |
April 26, 2002 | CAT. EXCL. 21 CFR 25.32 (i) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
215 | Poly(ethylene-methyl acrylate-cyclohexenylmethyl acrylate) (CAS Reg. No. 223503-47-7). | Cryovac, Inc. | As a component of articles used in contact with dry food containing no surface fat or oil (i.e. food type VIII as described in Table 1) and as a component of multi-layer articles in contact with food as specified. | Limitations/ Specifi- cations |
April 30, 2002 | EA/ FONSI | ||||||||||||||||||||||||||
Cryovac, Inc. | ||||||||||||||||||||||||||||||||
217 | 2-Cyano-3,3-diphenyl-2-propenoic acid 2-ethylhexyl ester (CAS Reg. No. 6197-30-4). | BASF Aktiengesellschaft | For use as a UV stabilizer in the manufacture of unplasticized polyvinyl chloride (PVC) and of polyethylene terephthalate (PET) polymers and copolymers complying with 21 CFR 177.1315, or 21 CFR 177.1630. | Limitations/ Specifi- cations |
May 3, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
220 | Methylmethacrylate-trimethylolpropane trimethacrylate copolymers (CAS Reg. No. 28931-67-1). | Nippon Shokubai Ltd. | The FCS will be used as an antiblocking agent in linear low-density polyethylene (LLDPE) copolymers intended for food-contact applications. | Limitations/ Specifi- cations |
June 4, 2002 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Nippon Shokubai Ltd. | ||||||||||||||||||||||||||||||||
221 | An approximately 1:1 mixture of hydroxymethyl-5,5-dimethylhydantoin (MMDMH)(CAS Reg. No. 27636-82-4) and 1,3-bis(hydroxymethyl)-5,5-dimethylhydantoin (DMDMH), (CAS Reg. No. 6440-58-0), containing up to 8.5 percent by weight residual 5,5-dimethylhydantoin on a dry basis (DMH)(CAS Reg. No. 77-71-4) or up to 5.5 percent in the formulated product. | Lonza, Inc. | As a preservative for mineral (pigment) slurries (clay, kaolin clay, calcium carbonate or titanium dioxide) that are used as paper fillers and/or components of paper coatings used in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
May 24, 2002 | EA/ FONSI | ||||||||||||||||||||||||||
Lonza, Inc. | ||||||||||||||||||||||||||||||||
222 | 1,5-Cyclooctadiene (CAS Reg. No. 111-78-4). | UBE Industries, Ltd. | As a molecular weight modifier in the manufacture of polybutadiene which will be used in the production of high-impact polystyrene for food-contact use. | Limitations/ Specifi- cations |
June 1, 2002 | EA/ FONSI | ||||||||||||||||||||||||||
Degussa-Huls Corp. | ||||||||||||||||||||||||||||||||
224 | 2,2,4-Trimethyl-1,3-pentanediol diisobutyrate (TXIB) (CAS Reg. No. 6846-50-0). | Eastman Chemical Co. | The FCS will be used as a plasticizer in vinyl chloride polymers for use in repeated-use food-contact applications and in vinyl chloride polymer-based gloves used to process food. | Limitations/ Specifi- cations |
June 7, 2002 | EA/ FONSI | ||||||||||||||||||||||||||
Eastman Chemical Co. | ||||||||||||||||||||||||||||||||
228 | Silaneamine, 1,1,1-trimethyl-N-(trimethylsylyl)-, hydrolysis products with silica (CAS Reg. No. 68909-20-6) or Silica ((dimethylvinylsilyl)oxy)- and ((trimethylsily)oxy)-modified (CAS Reg. No. 68988-89-6). | Wacker Silicones Corp. | As a filler for silicone elastomers complying with 21 CFR 177.2600. | Limitations/ Specifi- cations |
June 12, 2002 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Wacker Silicones Corp. | ||||||||||||||||||||||||||||||||
229 | Trilauryl phosphite (CAS Reg. No. 3076-63-9). | General Electric | As an antioxidant in non-plasticized polyvinyl chloride polymers. | Limitations/ Specifi- cations |
August 16, 2002 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
General Electric | ||||||||||||||||||||||||||||||||
231 | Styrene-acrylic copolymers. | BASF Corporation | For use as components of printing inks or coatings that are applied to polyolefin films intended for contact with food. | Limitations/ Specifi- cations |
June 25, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
232 | Phosphorous acid, bis(2,4-bis(1,1-dimethylethyl)-6-methylphenyl)ethyl ester (CAS Reg. No. 145650-60-8). The FCS is also known as bis(2,4-di-tert-butyl-6-methylphenyl)ethyl phosphite. REPLACES FCN #51 |
Ciba Specialty Chemicals Corporation | As a process stabilizer in olefin polymers. | Limitations/ Specifi- cations |
July 10, 2002 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
233 | 2-propenoic acid, homopolymer, calcium sodium salt (CAS Reg. No. 35830-10-5). | Polacryl, Inc. | As a component of pigment dispersants coating the surface of paper and paperboard. | Limitations/ Specifi- cations |
August 23, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Polacryl, Inc. | ||||||||||||||||||||||||||||||||
234 | Phenol,2,2'-methylenebis(6-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyly)- (CAS Reg. No. 103597-45-1). | Asahi Denka Kogyo K.K. | As a stabilizer in PET (polyethylene terephthalate) polymers. | Limitations/ Specifi- cations |
July 16, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Asahi Denka Kogyo K.K. | ||||||||||||||||||||||||||||||||
235 | Tin antimony oxide (CAS Reg. No. 12673-86-8). The food contact substance is also known as tin antimony gray cassiterite. | BASF Corporation | As a pigment for all polyolefins for food contact applications. | Limitations/ Specifi- cations |
September 12, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
236 | Poly(1,4-cyclohexylenedimethylene-1,4-cyclohexanedicarboxylate) (CAS Reg. No. 219566-57-1). | SABIC Innovative Plastics | As a component of repeated-use articles in contact with all food types, under Conditions of Use A through H, as described in Table 2. | Limitations/ Specifi- cations |
July 19, 2002 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
237 | Quino(2,3-b)acridine-7,14-dione,5,12-dihydro-,(1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)methyl derivatives (CAS Reg. No. 332142-67-3). This FCS is a mixture of phthalimidomethyl derivatives of quinacridone. | Ciba Specialty Chemicals Corp. | As a pigment dispersant for use in all types of food-contact polymers. | Limitations/ Specifi- cations |
July 26, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corp. | ||||||||||||||||||||||||||||||||
238 | Diethylene glycol monobenzoate (CAS Reg. No. 20587-61-5). | Velsicol Chemical Corp. | The FCS will be used as a component of adhesives complying with 21 CFR 175.105 Adhesives and with 21 CFR 177.1390 Laminate structures for use at temperatures of 250°F and above, paragraph (c)(2)(ii). | Limitations/ Specifi- cations |
July 31, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Velsicol Chemical Corp. | ||||||||||||||||||||||||||||||||
239 | A mixture consisting of 63-72 percent oxidized bis(hydrogenated tallow alkyl)amines, 12-15 percent bis(hydrogenated tallow alkyl)amines, 4-8 percent (hydrogenated tallow alkyl)nitrones, and 5-12 percent (hydrogenated tallow alkyl)oximes. | Ciba Specialty Chemicals Corp. | The FCS will be used as an acetaldehyde scavenger in polyethylene phthalate (PET) water bottles. | Limitations/ Specifi- cations |
July 31, 2002 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corp. | ||||||||||||||||||||||||||||||||
244 | Styrene/butadiene/acrylonitrile copolymers (SBA) (CAS Reg. No., exclusive of minor monomers: 9003-56-9) containing no more than 30 weight percent acrylonitrile and no more than 10 weight percent of total polymer units from one or more of the following monomers: acrylic acid, 2-hydroxyethyl acrylate, itaconic acid, and methacrylic acid. | OMNOVA Solutions Inc. | For use as a component of latex coatings for paper and paperboard in contact with all food types, complying with 21 CFR 176.170(b)(2). | Limitations/ Specifi- cations |
September 26, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
OMNOVA Solutions Inc. | ||||||||||||||||||||||||||||||||
245 | A perfluorocarbon cured elastomer (PCE) produced by terpolymerizing tetrafluoroethylene, (CAS Reg. No. 116-14-3), perfluoromethyl vinyl ether (CAS Reg. No. 1187-93-5), and perfluoro-6,6-dihydro-6-iodo-3-oxa-1-hexane (CAS Reg. No. 106108-22-9), and subsequent curing of the terpolymer (CAS Reg. No. 193018-53-0) with triallylisocyanurate (CAS Reg. No. 1025-15-6) and 2,5-dimethyl-2,5-di(t-butylperoxy)hexane (CAS Reg. No. 78-63-7). | Greene, Tweed and Company, Inc. | In the fabrication of molded parts for food processing equipment, such as o-rings, gaskets, diaphragms and other materials, that function primarily in sealing applications. | Limitations/ Specifi- cations |
August 13, 2002 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Greene, Tweed and Company, Inc. | ||||||||||||||||||||||||||||||||
246 | Fluorocarbon cured elastomer produced by copolymerizing tetrafluoroethylene (CAS Reg. No. 116-14-3) and propylene (CAS Reg. No. 115-07-01) and subsequent curing of the copolymer (CAS Reg. No. 27029-05-6) with triallylisocyanurate (CAS Reg. No. 1025-15-6) and 2,2'bis-(t- butylperoxy)diisopropylbenzene (CAS Reg. No. 25155-25-3). | Greene, Tweed and Company, Inc. | In the fabrication of molded parts for food processing equipment, such as o-rings, gaskets, diaphragms and other materials, that function primarily in sealing applications. | Limitations/ Specifi- cations |
August 13, 2002 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Greene, Tweed and Company, Inc. | ||||||||||||||||||||||||||||||||
247 | A perfluorocarbon cured elastomer (PCE) produced by terpolymerizing tetrafluoroethylene, (CAS Reg. No. 116-14-3), perfluoro-2,5-dimethyl-3,6-dioxanonane vinyl ether (CAS Reg. No. 2599-84-0), and perfluoro-6,6-dihydro-6-iodo-3-oxa-1-hexene (CAS Reg. No. 106108-22-9), and subsequent curing of the terpolymer (CAS Reg. No. 106108-23-0) with triallylisocyanurate (CAS Reg. No. 1025-15-6) and 2,5-dimethyl-2,5-di(t-butylperoxy)hexane (CAS Reg. No. 78-63-7). | Greene, Tweed and Company, Inc. | In the fabrication of molded parts for food processing equipment, such as o-rings, gaskets, diaphragms and other materials, that function being primarily in sealing applications. | Limitations/ Specifi- cations |
August 13, 2002 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Greene, Tweed and Company, Inc. | ||||||||||||||||||||||||||||||||
248 | Silver zinc glass, of nominal composition silver (0.47 percent +/- 0.1 percent)-zinc (21 percent +/- 2.0 percent)-aluminum-boron phosphate (=/> 76.4 percent) glass. | Ciba Specialty Chemicals Corporation | The food contact substance (FCS) will be used as an antimicrobial agent in all types of food-contact polymers. | Limitations/ Specifi- cations |
August 16, 2002 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Kanebo Chemical Industries, Ltd. | ||||||||||||||||||||||||||||||||
250 | Poly(N-vinylformamide), 20-100 percent hydrolyzed, chloride or sulfate salts. The FCS is specifically known as one of the following: a) formamide, N-ethenyl-, polymer with ethanamine, hydrochloride (CAS Reg. No. 111616-55-8); b) formamide, N-ethenyl-, polymer with ethanamine, sulfate (CAS Reg. No. 117985-59-8); and c) formamide, ethenyl-, homopolymer, hydrolyzed, hydrochlorides, (CAS Reg. No. 183815-54-5). | BASF Corporation | For use only as strengthening agents, fixing agents, or retention aids prior to the sheet-forming operation in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
October 5, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF AG/BASF Corporation | ||||||||||||||||||||||||||||||||
251 | Hexanedioic acid, polymer with 1,3-benzenedimethanamine (CAS Reg. No. 25718-70-1), meeting the specifications in 21 CFR 177.1500(b) item 10.2, when tested by the method given in 21 CFR 177.1500(c). The FCS is also known as Nylon MXD-6. | Gruppo Mossi & Ghisolfi | a) ethylene phthalate polymers complying with 21 CFR 177.1630(e)(4)(i) and 177.1630(e)(4)(ii), items 2 and 3; b) ethylene phthalate polymers complying with FCN numbers 000004 and 000085; c) ethylene phthalate-naphthalate polymers complying with FCN numbers 000008, 000009, and 000135; d) poly(oxy-1,2-ethanediyloxycarbonyl-2,6-naphthalanedicarbonyl) resins complying with 21 CFR 177.1637 and FCN No. 000009; and e) ethylene phthalate polymers and copolymers modified with pyromellitic dianhydride according to FCN numbers 000010, 000145, 000151, and 000200. | Limitations/ Specifi- cations |
August 24, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
FCS: Mitsubishi Gas Chemical Company, Inc., Tokyo, Japan; Polymers modified with the FCS: Gruppo Mossi & Ghisolfi | ||||||||||||||||||||||||||||||||
253 | Iso-butylene/maleic anhydride copolymer, sodium salt (CAS Reg. No. 39612-00-5) cross-linked with 1.9 percent by weight glycerol and 1.25 percent by weight 1,4-butanediol. | Camelot Technologies, Ltd. | For use as an component of fluid absorbent pads in contact with meat, poultry, fish and produce. | Limitations/ Specifi- cations |
August 28, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Camelot Technologies, Ltd. | ||||||||||||||||||||||||||||||||
254 | Methyl acrylate-divinylbenzene-diethylene glycol divinyl ether terpolymer, aminolyzed with dimethylaminopropylamine and partially quaternized with methyl chloride. (CAS Reg. No. 65997-24-2). | Rohm and Haas Company | For use in treating water and aqueous food only of the types identified under categories I, II, and VI-B in Table 1. | Limitations/ Specifi- cations |
August 31, 2002 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Rohm and Haas Company | ||||||||||||||||||||||||||||||||
255 | 3-cyclohexane-1-carboxylic acid, 6-((di-2-propenylamino)carbonyl)-,(1R,6R), reaction products with pentafluoroiodoethane-tetrafluoroethylene telomer, ammonium salts. | Ciba Specialty Chemicals Corporation | The FCS will be used as an oil repellent sizing agent in the production of paper and paperboard. | Limitations/ Specifi- cations |
September 5, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
256 | N,N,N',N'-tetrakis(2-hydroxyethyl)hexanediamide (CAS Reg. No. 6334-25-4). | EMS Chemie AG/EMS Primid | For use as a cross-linking agent for polyester coatings on metal substrates for contact with food. | Limitations/ Specifi- cations |
October 19, 2002 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
EMS Chemie AG/EMS Primid | ||||||||||||||||||||||||||||||||
257 | Alpha-sulpho-omega-(dodecyloxy)poly(oxyethylene)sodium salt (CAS Reg. No. 9004-82-4). The FCS is also known as sodium lauryl ether sulfate. | Stepan Company | The food contact substance (FCS) will be used as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard that contact aqueous and fatty foods. | Limitations/ Specifi- cations |
November 30, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Stepan Company | ||||||||||||||||||||||||||||||||
259 | C.I. Pigment Yellow 189 (Nickel titanium tungsten oxide)(CAS Reg. No. 69011-05-8). | BASF Corporation | As a colorant in all types of food-contact polymers. | Limitations/ Specifi- cations |
October 25, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
260 | Tetrafluoroethylene-hexafluoropropylene-vinylidene fluoride copolymers (CAS Reg. No. 25190-89-0). | Dyneon LLC | As a processing additive for polyolefins for use in contact with food. | Limitations/ Specifi- cations |
October 3, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Dyneon LLC | ||||||||||||||||||||||||||||||||
262 | Nylon 6/69 (CAS Reg. No. 51995-62-1), manufactured by the condensation of 49.5+ 0.5 weight percent epsilon-caprolactam, 19.4+0.2 weight percent hexamethylenediamine, and 31.2+0.3 weight percent azelaic acid. | EMS Chemie AG | As a non-food-contact layer of a co-extruded multilayer film in accordance with the uses permitted for nylon 6/69 resins as set forth in 21 CFR 177.1395. | Limitations/ Specifi- cations |
October 11, 2002 | EA/ FONSI | ||||||||||||||||||||||||||
EMS Chemie AG | ||||||||||||||||||||||||||||||||
263 | Pyrrolo(3,4-c)pyrrole-1,4-dione,2,5-dihydro-3,6-bis(4-(octadecylthio)phenyl)- (CAS Reg. No. 247089-62-9). | Ciba Specialty Chemicals Corporation | As a surface modifier for all pigments in all polymers. | Limitations/ Specifi- cations |
November 26, 2002 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
267 | A mixture of: 1) imidazolium compounds, 2-(C17 and C17 unsaturated alkyl)-1-(2-(C18 and C18 unsaturated amido)ethyl)-1-ethyl-4, 5-dihydro-, ethyl sulfates (CAS Reg. No. 91053-16-6); and 2) amides, C18 and C18-unsaturated, N-(2-(2-(C17 and C17-unsaturated alkyl)-4, 5-dihydro-1H-imidazol-1-yl)ethyl) (CAS Reg. No. 71808-32-7). | Hercules Inc. | As a debonding agent in uncoated food-contact paper and paperboard at levels up to 0.25 percent by weight of the dry paper and paperboard. | Limitations/ Specifi- cations |
October 18, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Hercules Inc. | ||||||||||||||||||||||||||||||||
268 | Tris(2,4-di-tert-butylphenyl)phosphite (CAS Reg. No. 31570-04-4). | Great Lakes Chemical Corporation | For use as a stabilizer in olefin copolymers described in 21 CFR 177.1520(a)(3)(iii) and meeting the specifications in 21 CFR 177.1520(c), item 3.4. | Limitations/ Specifi- cations |
October 18, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Great Lakes Chemical Corporation | ||||||||||||||||||||||||||||||||
270 | A silver-zinc-sodium aluminosilicate zeolite containing up to 2.9 percent by weight of silver and 19 percent by weight of zinc. The finished zeolite will also contain small amounts of calcium metaphosphate, zinc oxide and silica. | Ciba Specialty Chemicals Corporation | As an antimicrobial agent in all types of food-contact polymers. | Limitations/ Specifi- cations |
December 18, 2002 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Kanebo Chemical Industries, Ltd. | ||||||||||||||||||||||||||||||||
273 | 2-Propen-1-aminium, N,N-dimethyl-N-2-propenyl-, chloride, polymer with 2-propenoic acid and N-2-propen-1-amine hydrochloride, 2,2'-azobis(2-methylpropanimidamide) dihydrochloride- initiated. (CAS Reg. No. 343837-39-8). | Hercules, Inc. | For use as a wet-end sizing additive in the manufacture of paper and paperboard for contact with dry food. | Limitations/ Specifi- cations |
November 13, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Hercules, Inc. | ||||||||||||||||||||||||||||||||
274 | 2-Naphthalenesulfonic acid, 6-hydroxy-5((4-methoxy-2-sulfophenyl)azo)-, strontium salt (1:1) (CAS Reg. No. 380304-86-9; C.I. Pigment Violet 52). | BASF Corporation | As a colorant for all food-contact polymers. | Limitations/ Specifi- cations |
November 14, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
275 | Silver-magnesium-sodium-boron-phosphate glass (silver glass). | Ciba Specialty Chemicals Corporation | The food contact substance (FCS) will be used as an antimicrobial agent in all types of food-contact polymers. | Limitations/ Specifi- cations |
January 3, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ishizuka Glass Company, Ltd. (manufacturer); Kanebo Chemical Industries, Ltd. (supplier) | ||||||||||||||||||||||||||||||||
276 | Hexanedioic acid, polymer with N-(2-aminoethyl)-1,2-ethanediamine, N-acetyl derivative, epichlorohydrin quaternized (CAS Reg. No. 344612-00-6). | Hercules, Inc. | The FCS will be used as a wet-strength agent in uncoated containerboard. | Limitations/ Specifi- cations |
November 20, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Hercules, Inc. | ||||||||||||||||||||||||||||||||
277 | 2-Propenoic acid, 2-cyano-3,3-diphenyl-,2,2-bis{[(2-cyano-1-oxo-3, 3-diphenyl-2-propenyl)oxy]methyl}-1,3-propanediyl ester (CAS Reg. No. 178671-58-4). | BASF Aktiengesellschaft | The FCS will be used as an ultraviolet (UV) stabilizer for all polymers intended for single and repeat use in contact with food. | Limitations/ Specifi- cations |
January 21, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
278 | REPLACED BY FCN 573 | Limitations/ Specifi- cations |
||||||||||||||||||||||||||||||
279 | Tetradecanoic acid, lithium salt (CAS Reg. No. 20336-96-3). | Asahi Denka Co., Ltd. | As a stabilizer in propylene homopolymers and copolymers. | Limitations/ Specifi- cations |
December 10, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Asahi Denka Co., Ltd. | ||||||||||||||||||||||||||||||||
280 | Copolyesters of dimethyl terephthalate or terephthalic acid with ethylene glycol, 1,4-cyclohexanedimethanol and diethylene glycol (CAS Reg. No. 148105-13-9 and 156209-91-5). | Eastman Chemical Company | The FCS will be used as a component of food contact articles intended to contact aqueous and fatty foods and alcoholic foods containing up to 15 percent ethanol by volume. Food-contact articles prepared from the FCS are intended for use under Conditions of Use C (see limitations on hot-fill temperature, below) through G as described Table 2. | Limitations/ Specifi- cations |
February 1, 2003 | EA/ FONSI | ||||||||||||||||||||||||||
Eastman Chemical Company | ||||||||||||||||||||||||||||||||
282 | 2-propenoic acid, homopolymers, calcium sodium salt (CAS Reg. No. 35830-10-5). | Polacryl, Inc. | As a pigment dispersant for titanium dioxide that is used as a filler in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
January 10, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Polacryl, Inc. | ||||||||||||||||||||||||||||||||
283 | 2-propenoic acid, polymers with N,N-di=2-propenyl-2-propen-1-amine and hydrolyzed polyvinyl acetate, sodium salts, graft (CAS Reg. No. 166164-74-5). | Stockhausen, Inc. | For use as an absorptive medium in absorbent pads employed in the packaging of refrigerated cubed tomatoes, refrigerated fresh-cut fruits and vegetables, refrigerated whole berries, and refrigerated or frozen fish fillets. | Limitations/ Specifi- cations |
March 1, 2003 | EA/ FONSI | ||||||||||||||||||||||||||
Stockhausen, Inc. | ||||||||||||||||||||||||||||||||
284 | Industrial starch modified by treatment with greater than 5 percent and not more than 21 percent by weight 2,3-epoxypropyl trimethylammonium chloride (CAS Reg. No. 3033-77-0). | Penford Products Company | For use as a retention aid and/or drainage aid and/or dry-strength agent employed prior to the sheet forming operation in the manufacture of only recycled, food-contact paperboard at a maximum level of 1 percent by weight of the dry pulp. | Limitations/ Specifi- cations |
February 21, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Penford Products Company | ||||||||||||||||||||||||||||||||
285 | 2-Oxepanone, polymer with 1,4-butanediol (CAS Reg. No. 31831-53-5). | DuPont Performance Elastomers, LLC | 2-Oxepanone, polymer with 1,4-butanediol is intended for use as a processing aid in all polyolefins for single and repeat use food-contact applications. | Limitations/ Specifi- cations |
January 9, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
DuPont Performance Elastomers, LLC | ||||||||||||||||||||||||||||||||
286 | 2-Methyl-4-isothiazolin-3-one (CAS Reg. No. 2682-20-4). | Rohm and Haas Company | As an antimicrobial agent for preservation of latex emulsions destined for use in latex gloves intended to contact all types of food. | Limitations/ Specifi- cations |
January 16, 2003 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
Rohm and Haas Company | ||||||||||||||||||||||||||||||||
288 | Trilauryl phosphite (CAS Reg. No. 3076-63-9). | General Electric | As an antioxidant in plasticized polyvinyl chloride polymers. | Limitations/ Specifi- cations |
January 22, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
General Electric | ||||||||||||||||||||||||||||||||
289 | Boron nitride (CAS Reg. No. 10043-11-5). | Saint-Gobain Advanced Ceramics Corporation | The FCS will be used as a processing aid in the production of olefin polymers complying with the provisions 21 CFR 177.1520. | Limitations/ Specifi- cations |
April 1, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Saint-Gobain Advanced Ceramics Corporation | ||||||||||||||||||||||||||||||||
290 | 2-propenoic acid, 2-methyl-,1,2-ethanediyl ester, polymer with oxiranylmethyl 2-methyl-2-propenoate, hydrogen sulfate (CAS Reg. No. 117163-06-1). | TOSOH Corporation | For use as an ion exchange resin to remove cationic substances from skim milk in order to manufacture milk protein concentrate (MPC). | Limitations/ Specifi- cations |
January 29, 2003 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
TOSOH Corporation | ||||||||||||||||||||||||||||||||
292 | Cross-linked terpolymer of 1-vinylimidazole, 1-vinylpyrrolidone and 1,3-divinylimidazolidinone (CAS Reg. No. 87865-40-5). The FCS is also known as Polyvinylimidazole (PVI). | Gordon Burns and Robert Ellsworth | As a component of filter media, for removal of metals and sulfides in alcoholic beverages using repeat-usage filtering equipment. | Limitations/ Specifi- cations |
February 6, 2003 | EA /Fonsi | ||||||||||||||||||||||||||
Gusmer-Cellulo Corporation | ||||||||||||||||||||||||||||||||
293 | Pyrimido(5,4-g)pteridine-2,4,6,8-tetramine,4-methylbenzenesulfonate, base-hydrolyzed (Pigment Yellow 382E; CAS Reg. No. 346709-25-9), which is a mixture consisting of approximately 65.3 percent Pyrimido(5,4-g)pteridine-2,4,6,9-tetramine (CAS Reg. No. 207283-64-5), approximately 7.5 percent 2,6,8-triamino-pyrimido(5,4-g)pteridine-4(1H)-one (CAS Reg. No. 335356-94-0), approximately 16.7 percent 2,8-diamino-pyrimido(5,4-g)pteridine-4,6(1H, 7H)-dione (CAS Reg. No. 207283-72-5), and approximately 0.3 percent 8-amino-pyrimido(5,4-g)pteridine-2,4,6(1H,3H,7H)-trione (CAS Reg. No. 207283-92-9). | Ciba Specialty Chemicals Corporation | As a colorant in all food-contact polymers. | Limitations/ Specifi- cations |
February 13, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
294 | Zinc zeolite A (zinc sodium aluminosilicate). | Ciba Specialty Chemicals Corporation | As a dispersing agent for silver-magnesium-sodium-boron-phosphate-glasses in the manufacture of food-contact polymers. | Limitations/ Specifi- cations |
February 13, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Kanebo Chemical Industries, Ltd. | ||||||||||||||||||||||||||||||||
295 | Hydrogen peroxide | Dr. Kareem I. Batarseh | As a component of an antimicrobial formulation for use on poultry carcasses, poultry parts, and whole and cut raw fruits and vegetables. | Limitations/ Specifi- cations |
February 15, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Dr. Kareem I. Batarseh | ||||||||||||||||||||||||||||||||
296 | Silver nitrate | Dr. Kareem I. Batarseh | As a component of an antimicrobial formulation for use on poultry carcasses, poultry parts, and whole and cut raw fruits and vegetables. | Limitations/ Specifi- cations |
February 15, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Dr. Kareem I. Batarseh | ||||||||||||||||||||||||||||||||
297 | BALINIT A, chemically identified as titanium nitride (CAS Reg. No. 25583-20-4). | Balzers Aktiengesellschaft | The FCS will be used as a component of ceramic surface coating for repeat-use food processing and food packaging equipment. | Limitations/ Specifi- cations |
December 25, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Balzers Aktiengesellschaft | ||||||||||||||||||||||||||||||||
298 | BALINIT B, chemically identified as titanium carbonitride. | Balzers Aktiengesellschaft | The FCS will be used as a component of ceramic surface coating for repeat-use food processing and food packaging equipment. | Limitations/ Specifi- cations |
December 25, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Balzers Aktiengesellschaft | ||||||||||||||||||||||||||||||||
299 | BALINIT C, chemically identified as tungsten carbide/carbon +Chromium. | Balzers Aktiengesellschaft | The FCS will be used as components of repeat-use food processing and food packaging equipment as a double layered ceramic coating consisting of a functional tungsten carbide/carbon layer and an interface chromium layer. | Limitations/ Specifi- cations |
December 25, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Balzers Aktiengesellschaft | ||||||||||||||||||||||||||||||||
300 | BALINIT D, BALINIT CNI, and BALINIT CROVEGA, chemically identified as chromium nitride (CAS Reg. No. 24094-93-7). | Balzers Aktiengesellschaft | The FCS will be used as a component of ceramic surface coating on repeat-use food processing and food packaging equipment. | Limitations/ Specifi- cations |
December 25, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Balzers Aktiengesellschaft | ||||||||||||||||||||||||||||||||
301 | BALINIT DLC, BALINIT TRITON, chemically identified as diamond-like carbon. | Balzers Aktiengesellschaft | The FCS will be used as components of repeat-use food processing and food packaging equipment as a double layered ceramic coating consisting of a functional diamond-like carbon layer and an interface chromium layer. | Limitations/ Specifi- cations |
December 25, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Balzers Aktiengesellschaft | ||||||||||||||||||||||||||||||||
302 | BALINIT FUTURA, BALINIT FUTURA NANO, and BALINIT X.TREME, chemically identified as titanium aluminum nitride. | Balzers Aktiengesellschaft | The FCS will be used as a component of ceramic surface coating on repeat-use food processing and food packaging equipment. | Limitations/ Specifi- cations |
December 25, 2002 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Balzers Aktiengesellschaft | ||||||||||||||||||||||||||||||||
303 | Siloxanes and silicones, dimethyl, methylhydrogen reaction products with polyethylene glycol and/or polyethylene-polypropylene glycol monoallyl ether, methyl ether terminated. | Crompton Corporation | As defoamers, at levels up to 40 grams per metric ton of dry pulp (0.004 percrnt), in the pulping of lignocellulosic materials used to make food-contact paper and paperboard. | Limitations/ Specifi- cations |
March 5, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Crompton Corporation | ||||||||||||||||||||||||||||||||
307 | Butanedioic acid, compd. with 1,1',1"-nitrilotris[2-propanol] (CAS Reg. No.462110-48-1; also called salt of triisopropanolamine and succinic acid). | Kerr-McGee Chemical LLC | For use as a pigment dispersant in food-contact articles. | Limitations/ Specifi- cations |
March 19, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Kerr-McGee Chemical LLC | ||||||||||||||||||||||||||||||||
308 | 5,5-Dimethylhydantoin (DMH) (CAS Reg. No. 77-71-4). | Lonza, Inc. | The FCS will be used as a stabilizer for hypohalite slimicides used in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
March 21, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Lonza, Inc. | ||||||||||||||||||||||||||||||||
310 | 5,7-bis(1,1-dimethylethyl)-3-hydroxy-2(3H)-benzofuranone, reaction products with o-xylene (CAS Reg. No. 181314-48-7). | Ciba Specialty Chemicals Corporation | For use as an antioxidant/stabilizer in olefin polymers and copolymers. | Limitations/ Specifi- cations |
April 12, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
311 | Copolymers of 2-perfluoroalkylethyl acrylate, 2-N,N-diethylaminoethyl methacrylate, and glycidyl methacrylate. | DuPont Chemical Solutions Enterprise | For use as an oil or grease resistant treatment for paper and paperboard intended for single service use in microwave heat-susceptor packaging; the food-contact substance is intended to contact all food types. | Limitations/ Specifi- cations |
April 15, 2003 | EA /FONSI | ||||||||||||||||||||||||||
DuPont Chemical Solutions Enterprise | ||||||||||||||||||||||||||||||||
312 | 2-Ethyl-2-(hydroxymethyl)-1,3-propanediol (Trimethylolpropane, TMP, CAS Reg. No. 77-99-6). | Mitsui Chemical, Inc. | For use as a modifier of polyethylene phthalate polymers. The finished polymer may contact all food types under the Conditions of Use B or the Conditions of Use permitted for the complaint polymers, whichever is less severe. | Limitations/ Specifi- cations |
April 15, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Mitsui Chemical, Inc. | ||||||||||||||||||||||||||||||||
314 | 2-Propen-1-ol, reaction products with pentafluoroiodoethane-tetrafluoroethylene telomer, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine (CAS Reg. No. 464178-90-3). | Hercules, Inc. | As an oil/grease resistant sizing agent employed prior to the sheet-forming operation in the manufacture of paper and paperboard for single use applications. | Limitations/ Specifi- cations |
April 23, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Hercules, Inc. | ||||||||||||||||||||||||||||||||
315 | 1,2-Benzisothiazolin-3-one (CAS Reg. No. 2634-33-5). | Avecia, Inc. | As a biocide in uncured liquid rubber latex used to manufacture repeat-use rubber gloves intended for use in poultry and meat processing plants. | Limitations/ Specifi- cations |
April 25, 2003 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
Avecia, Inc. | ||||||||||||||||||||||||||||||||
316 | 1,2-bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamoyl)hydrazine. (CAS Reg. No. 32687-78-8). | Great Lakes Chemical Corporation | For use as a stabilizer in polyolefin polymers and copolymers. | Limitations/ Specifi- cations |
July 8, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Great Lakes Chemical Corporation | ||||||||||||||||||||||||||||||||
320 | Copolymer of 2-Imidazolidinone, 1,3-diethenyl-,polymer with 1-ethenyl-1H-imidazole and 1-ethenyl-2-pyrrolidinone (CAS Reg. No. 87865-40-5). | BASF Corporation | For the removal of heavy metal ions and sulfides from alcoholic beverages, including beer and wine. | Limitations/ Specifi- cations |
July 5, 2003 | EA /FONSI | ||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
321 | Styrene block polymer with 2-methyl-1,3-butadiene, hydrogenated (CAS Reg. No. 68648-89-5). | Septon Company of America Kuraray America, Inc. Kuraray Co., Ltd. Kuraray Europe, GmbH |
As an article or component of articles intended to contact food. | Limitations/ Specifi- cations |
July 1, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Septon Company of America Kuraray America, Inc. Kuraray Co., Ltd. Kuraray Europe, GmbH |
||||||||||||||||||||||||||||||||
323 | A mixture containing peroxyacetic acid (CAS Reg. No. 79-21-0), hydrogen peroxide (CAS Reg. No. 7722-81-1), acetic acid (CAS Reg. No. 64-19-7), 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) (CAS Reg. No. 2809-21-4), and water. | FMC Corporation | The FCS will be used as an antimicrobial agent for meat and poultry carcasses. | Limitations/ Specifi- cations |
May 27, 2003 | EA /FONSI | ||||||||||||||||||||||||||
FMC Corporation | ||||||||||||||||||||||||||||||||
324 | Alpha-methylstyrene dimer (2,4-Diphenyl-4-methyl-1-pentene; Benzene, 1,1'-(1,1-dimethyl-3-methylene-1,3-propanediyl)bis-; (CAS Reg. No. 6362-80-7). | JSR Corporation Asahi Kasei Corporation Goi Chemical Company, Ltd. |
For use as a polymerization control agent in styrene-butadiene latex coatings for food-contact paper and paperboard. | Limitations/ Specifi- cations |
June 13, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
JSR Corporation Asahi Kasei Corporation Goi Chemical Company, Ltd. |
||||||||||||||||||||||||||||||||
325 | 1-Propanesulfonic acid, 2-methyl-2-[(1-oxo-2-propenyl)amino]-, monosodium salt, polymer with N,N'-methylene bis[2-propenamide], peroxydisulfuric acid ([(OH)S(O)2]2O2) diammonium salt-initiated (CAS Reg. No. 388567-01-9). | Biosepra SA, Division of Ciphergen Biosystems Inc. | For repeated use as an ion exchange resin to absorb and purify enzymes and other proteins from sweet whey, nonfat milk, and milk at temperatures of 15°C or less. | Limitations/ Specifi- cations |
August 2, 2003 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Ciphergen Biosystems Inc. | ||||||||||||||||||||||||||||||||
326 | N-(2-Hydroxyethyl)octadecanamide (CAS Reg. No. 111-57-9). | Ecolab Inc. (Research Center) | The FCS will be used as a processing aid in rinse-aid products used in commercial dishwashing machines. | Limitations/ Specifi- cations |
July 4, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Degussa Goldschmidt Chemical Corporation | ||||||||||||||||||||||||||||||||
327 | Polypropylene glycol monobutyl ether CAS name: Poly(oxy(methyl-1,2-ethanediyl)), alpha-butyl-omega-hydroxy- (CAS Reg. No. 9003-13-8). |
Crompton Corporation | As a diluent in defoamers used in the pulping of lignocellulosic materials that will be used to make food-contact paper and paperboard. | Limitations/ Specifi- cations |
July 12, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Crompton Corporation | ||||||||||||||||||||||||||||||||
328 | Phosphorous acid, bis[2,4-bis(1,1-dimethylethyl)-6-methylphenyl]ethyl ester (CAS Reg. No. 145650-60-8). The FCS is also known as bis(2,4-di-tert-butyl-6-methylphenyl)ethyl phosphite. | Ciba Specialty Chemicals Corporation | As an antioxidant and/or stabilizer in adhesives. | Limitations/ Specifi- cations |
July 17, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
329 | Silicon Dioxide (CAS Reg. No. 7631-86-9). | Schott HiCotec, Division of Schott Spezialglas GmbH | To be used as an amorphous plasma-deposited silicon barrier coating on the food-contact surface of PET food packaging articles. | Limitations/ Specifi- cations |
July 17, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Schott HiCotec, Division of Schott Spezialglas GmbH | ||||||||||||||||||||||||||||||||
330 | Quino(2,3-b)acridine-7,14-dione,5,12-dihydro- (6CI, 8CI, SCI), (C.I. Pigment Violet 19) (CAS Reg. No. 1047-16-1). | Ciba Specialty Chemicals Corporation | As a colorant for paper and paperboard. | Limitations/ Specifi- cations |
July 24, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
332 | The FCS is the cross-linked reaction product of (1) an acrylic resin, consisting of a copolymer of styrene (CAS Reg. No. 100-42-5), methyl methacrylate (CAS Reg. No. 80-62-6), methacrylic acid (CAS Reg. No. 79-41-4), t-butyl methacrylate (CAS Reg. No. 585-07-9), and hydroxyethyl methacrylate (CAS Reg. No. 868-77-9); (2) a silane coupling agent, consisting of y-isocyanatopropyltrimethoxysilane (CAS Reg. No. 15396-00-6); and (3) a urethane prepolymer which is an isocyanate-terminated polymer consisting of trimethylol propane (CAS Reg. No. 77-99-6) adducts of isophorone diisocyanate (CAS Reg. No. 4098-71-9) and m-xylylene diisocyanate (CAS Reg. No. 3634-83-1). | Toppan Printing Co., Ltd. | As an adhesive layer in a multi-layer film intended for use in packaging food. | Limitations/ Specifi- cations |
August 1, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Toppan Printing Co., Ltd. | ||||||||||||||||||||||||||||||||
333 | The reaction product of polyvinyl alcohol (PVOH) and tetraethoxysilane (TEOS), (CAS Reg. No. 9002-89-5 and 78-10-4 respectively). | Toppan Printing Co., Ltd. | For use in a non-food contact layer [to be separated from food by at least 50 micron (2 mil) thick polypropylene layer] in multilayer constructions intended for use in single-use packaging of food of all types (as defined in Table 1) under Conditions of Use A (as defined in Table 2), under retort packaging conditions only. | Limitations/ Specifi- cations |
August 1, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Toppan Printing Co., Ltd. | ||||||||||||||||||||||||||||||||
334 | 1,3-dibromo-5,5-dimethylhydantoin (DBDMH; CAS Reg. No. 77-48-5). | Albemarle Corporation | As an antimicrobial in chiller water used during poultry processing. | Limitations/ Specifi- cations |
August 6, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Albemarle Corporation | ||||||||||||||||||||||||||||||||
336 | Styrene-acrylic copolymers as further described in your submission (FCN 336). | BASF Corporation | For use as components of printing inks or coatings that are applied to polyester films intended for contact with food. | Limitations/ Specifi- cations |
August 12, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
337 | Trilauryl phosphite (CAS Reg. No. 3076-63-9) containing not more than 1 percent by weight triisopropanolamine (CAS Reg. No. 122-20-3). | General Electric | As an antioxidant in linear low density polyethylene. | Limitations/ Specifi- cations |
August 12, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
General Electric | ||||||||||||||||||||||||||||||||
338 | Copolymers of 2-perfluoroalkylethyl acrylate, 2-N,N-diethylaminoethyl methacrylate, and glycidyl methacrylate. | DuPont Chemical Solutions Enterprise | For use as an oil or grease resistant treatment for paper and paperboard intended for food-contact use. | Limitations/ Specifi- cations |
August 19, 2003 | EA /FONSI | ||||||||||||||||||||||||||
DuPont Chemical Solutions Enterprise | ||||||||||||||||||||||||||||||||
339 | 1,4-Dioxa-8-azaspiro[4.5]decane, 7,7,9,9-tetramethyl- (CAS Reg. No. 36793-27-8). | Degussa Corporation | As a catalyst in the manufacture of pulp used to manufacture food-contact paper. | Limitations/ Specifi- cations |
August 26, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Degussa Corporation | ||||||||||||||||||||||||||||||||
340 | Quino[2,3-b]acridine-7,14-dione,5,12-dihydro-2,9-dimethyl- (also known as Pigment Red 122) (CAS Reg. No. 980-26-7). | Ciba Specialty Chemicals Corporation | The FCS will be used as a colorant for polymers. | Limitations/ Specifi- cations |
November 7, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
341 | 2,4-bis[(dodecylthio)methyl]-6-methylphenol (CAS Reg. No. 110675-26-8). | Ciba Specialty Chemicals Corporation | As a stabilizer for adhesives, pressure-sensitive adhesives, and styrene-block polymers. | Limitations/ Specifi- cations |
August 28, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
342 | Hexanedioic acid, polymer with hexahydro-2H-azepin-2-one and 1,6-hexanediamine [Nylon 6/66] (CAS Reg. No. 24993-04-2). | Honeywell International Inc. | As a component of films used in contact with all food types under Conditions of Use A through H, as described in Tables 1 and 2, respectively. | Limitations/ Specifi- cations |
November 18, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Honeywell International Inc. | ||||||||||||||||||||||||||||||||
344 | 2-Propenoic acid, 2-methyl, monoester with 1,2-propanediol, polymer with methyl 2-propenoate, 2-propenoic acid and sodium 2-propenoate (CAS Reg. No. 117675-55-5). | Ciba Specialty Chemicals Corporation | As a fluid absorbant in food-contact materials. | Limitations/ Specifi- cations |
September 19, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Technical Absorbents, Inc. | ||||||||||||||||||||||||||||||||
345 | Hydrogenated petroleum hydrocarbon resin (cyclopentadiene-type) (CAS Reg. No. 68132-00-3). | Eastman Chemical Company | The FCS will be used as an adjuvant at levels not to exceed 15 percent by weight in blends with high density polyethylene (HDPE) complying with 21 CFR 177.1520(c), item 2.1 or 2.2. The density of each of these polymers shall not be less than 0.94 gram per cubic centimeter. | Limitations/ Specifi- cations |
September 25, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Eastman Chemical Company | ||||||||||||||||||||||||||||||||
346 | 2,2,5,7,8-Pentamethyl-6-chromanol (CAS Reg. No. 950-99-2) Other name: 2,2,5,7,8-Pentamethyl-6-hydroxy chroman. | API Corporation | As a stabilizer for use in linear low-density polyethylene food-contact films, coatings and molded articles. | Limitations/ Specifi- cations |
October 2, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
API Corporation | ||||||||||||||||||||||||||||||||
348 | 1,3-benzenedicarboxylic acid, 5-sulfo-, 1,3-dimethyl ester, sodium salt, polymer with dimethyl 1,4-benzenedicarboxylate, dimethyl pentanedioate and 1,2-ethanediol (CAS Reg. No. 65072-10-8). | E.I. duPont de Nemours and Company | For use in food-contact articles except bottles. | Limitations/ Specifi- cations |
December 11, 2003 | EA /FONSI | ||||||||||||||||||||||||||
E.I. duPont de Nemours and Company | ||||||||||||||||||||||||||||||||
349 | Polyester-polyurethane resin-acid dianhydride adhesive as described at 21 CFR 177.1390(c)(2)(vii). | Dainippon Ink and Chemicals, Inc. | For use as an adhesive in laminate structures that are intended for use at retort temperatures. | Limitations/ Specifi- cations |
November 25, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Dainippon Ink and Chemicals, Inc. | ||||||||||||||||||||||||||||||||
350 | Hydrogenated styrene butadiene block copolymers (CAS Reg. No. 66070-58-4). | SABIC Innovative Plastics | As a component of repeated-use articles for use in contact with Food Types III, IV-A, V, VII-A, and IX identified in Table 1 at temperatures up to 100°C. | Limitations/ Specifi- cations |
October 9, 2003 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
351 | A type of zeolite in which silver, zinc and ammonium ions have been exchanged for sodium ions. The silver content of the modified zeolite shall not exceed 5 percent by weight. | AgIon Technologies | The function of the food contact substance (FCS) is to control microorganisms that may grow on the article and to thereby preserve the article. | Limitations/ Specifi- cations |
October 21, 2003 | EA /FONSI | ||||||||||||||||||||||||||
AgIon Technologies | ||||||||||||||||||||||||||||||||
352 | Di-(para-methylbenzylidene) sorbitol (CAS Reg. No. 81541-12-0, 54686-97-4 and 197809-37-3) alone or containing up to 1 percent triisopropanolamine (CAS Reg. No. 122-20-3). | Ciba Specialty Chemicals Corporation | As a clarifying agent for polypropylene homopolymers and copolymers complying with 21 CFR 177.1520. | Limitations/ Specifi- cations |
October 29, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
355 | 1,3-benzenedicarboxylic acid, 5-sulfo-1, 3-dimethyl ester, sodium salt, polymer with dimethyl 1,4-benzenedicarboxylate, dimethyl pentanedioate, poly(ethylene glycol), and 1,2-ethanediol. | E.I. duPont de Nemours and Company | As a coating or film. | Limitations/ Specifi- cations |
December 27, 2003 | EA /FONSI | ||||||||||||||||||||||||||
E.I. duPont de Nemours and Company | ||||||||||||||||||||||||||||||||
356 | 5,12-Dihydro-2,9-dimethylquino[2,3-b]acridine-7,14-dione (C.I. Pigment Red 122, CAS Reg. No. 980-26-7) also known as 2,9-Dimethylquinacridone. | Clariant Corporation, Pigments and Additives Division | As a colorant in single- and repeat-use polymeric, food-contact articles. | Limitations/ Specifi- cations |
November 14, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Clariant Corporation, Pigments and Additives Division | ||||||||||||||||||||||||||||||||
357 | 1,3-dibromo-5,5-dimethylhydantoin (DBDMH; CAS Reg. No. 77-48-5). | Albemarle Corporation | As an antimicrobial in water applied to poultry via an Inside-Outside Bird Washer (IOBW) and in water used for Off-Line Reprocessing (OLR) of poultry. | Limitations/ Specifi- cations |
November 14, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Albemarle Corporation | ||||||||||||||||||||||||||||||||
358 | Polysiloxane di-methyl, vinyl-terminated, reaction product with 1,2,4-trivinylcyclohexane polymer with polydimethylsiloxane, hydrogen terminated. | Wacker Silicones Corporation | As a cross-linking agent in the manufacture of silicone release agents complying with
21 CFR 175.300, 175.320 and 176.170 and intended for use as: 1) a component of food packaging articles, 2) in molds used to manufacture food-contact materials, and 3) a component of release coatings (a dehesive) for use with pressure-sensitive labels. |
Limitations/ Specifi- cations |
November 14, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Wacker Silicones Corporation | ||||||||||||||||||||||||||||||||
359 | Benzoic acid, 2,4-dihydroxy-, polymer with formaldehyde and 1-naphthalenol, sodium salt (CAS Reg. No. 209119-35-7). | 3V, Inc. | For use as an anti-foulant on the interior surfaces of PVC polymerization autoclaves used to produce PVC intended for food contact. | Limitations/ Specifi- cations |
January 7, 2004 | EA /FONSI | ||||||||||||||||||||||||||
3V, Inc. | ||||||||||||||||||||||||||||||||
360 | Polyethylene terephthalate copolymers (diethylene glycol-azelaic acid modified) prepared by the condensation of terephthalate acid (or dimethyl terephthalate) and ethylene glycol with azelaic acid and diethylene glycol. The copolymers shall be manufactured and characterized as described in the notification. | DuPont Teijin Films | For use as films intended for contact with all types of food under Conditions of Use A through H as described in Table 2, and in ovenable applications at temperatures up to 400°F. | Limitations/ Specifi- cations |
November 20, 2003 | EA /FONSI | ||||||||||||||||||||||||||
DuPont Teijin Films | ||||||||||||||||||||||||||||||||
361 | Tetraethylenepentamine (CAS Reg. No. 112-57-2). | Huntsman Ethyleneamines Ltd. | As a wet-end processing additive in the manufacture of paper pulp. | Limitations/ Specifi- cations |
December 4, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Huntsman Ethyleneamines Ltd. | ||||||||||||||||||||||||||||||||
362 | Siloxanes and silicones, di-methyl, 3-(4-hydroxy-3-methoxyphenyl)propyl group-terminated, polymers with bisphenol A, carbonic dichloride and 4-(1-methyl-1-phenylethyl)phenol (CAS Reg. No. 202483-49-6; also known as siloxane-modified polycarbonate) where the siloxane-modified portion of the FCS is approximately 22 percent by weight of the FCS. | SABIC Innovative Plastics | As a resin blended with conventional polycarbonate. | Limitations/ Specifi- cations |
January 7, 2004 | EA /FONSI | ||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
363 | Siloxanes and silicones, di-methyl, 3-(4-hydroxy-3-methoxy-3-methoxyphenyl)propyl group-terminated, polymers with bisphenol A, carbonic dichloride and 4-(1-methyl-1-phenylethyl)phenol (CAS Reg. No. 202483-49-6; also known as siloxane-modified polycarbonate) where the siloxane-modified portion of the FCS is approximately 7 percent by weight of the FCS. | SABIC Innovative Plastics | As a component of articles intended to contact food. | Limitations/ Specifi- cations |
January 7, 2004 | EA /FONSI | ||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
365 | 1,4-Benzenediamine, N-(1-3-dimethylbutyl)-N'-phenyl-, reaction products with ethylene oxide mono[[C12-richC10-13-branched alkyl thio]methyl] derivatives (CAS Reg. No. 4449992-04-5). | Ciba Specialty Chemicals Corporation | The FCS will be used as an antioxidant in rubber articles intended for repeat-use in contact with food. | Limitations/ Specifi- cations |
December 9, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
366 | 1,2-Bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamoyl)hydrazine (CAS Reg. No. 32687-78-8). | Ciba Specialty Chemicals Corporation | As an antioxidant in high density polyethylene (HDPE), polyethylene copolymers as described in 21 CFR 177.1520(c) item 3.2a, and in polyolefin repeat-use articles. | Limitations/ Specifi- cations |
December 11, 2003 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
368 | Ethylene/1-butene copolymers (CAS Reg. No. 25087-34-7). | DuPont Dow Elastomers LLC The Dow Chemical Company |
As a component of articles used in contact with all types of food. | Limitations/ Specifi- cations |
December 17, 2003 | EA /FONSI | ||||||||||||||||||||||||||
The Dow Chemical Company K-Dow Petrochemicals BV |
||||||||||||||||||||||||||||||||
369 | Siloxanes and silicones, di-Me, hydrogen-terminated, reaction products with acrylic acid and 2-ethyl-2-[(2-propenyloxy)methyl]-1,3-propanediol (CAS Reg. No. 155419-56-0). The cured resins may include the photoinitiator 2-hydroxy-2-methyl-1-phenyl-propanone (CAS Reg. No. 7473-98-5). | Goldschmidt Chemical Corporation | As coatings or components of coatings on polymeric substrates and on paper and paperboard, at a maximum level of 1.5 grams per square meter (g/m2), in contact with all food types under Conditions of Use E, F, G, and H as defined in Table 2. | Limitations/ Specifi- cations |
December 18, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Goldschmidt Chemical Corporation | ||||||||||||||||||||||||||||||||
370 | Dibutyl sebacate (CAS Reg. No. 000109-43-3). | Ciba Specialty Chemicals Corporation | As a dispersing agent for pigments used as colorants in all polymers. | Limitations/ Specifi- cations |
December 23, 2003 | EA /FONSI | ||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
371 | 1,2-Benzisothiazolin-3-one (CAS Reg. No. 2634-33-5). | Avecia, Inc. | As a biocide in uncured liquid rubber latex used to manufacture repeat-use rubber gloves intended for use in contact with all types of food. | Limitations/ Specifi- cations |
December 23, 2003 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
Avecia, Inc. | ||||||||||||||||||||||||||||||||
372 | REPLACED BY FCN 780 | Limitations/ Specifi- cations |
||||||||||||||||||||||||||||||
373 | Monoisopropanolamine (MIPA) (CAS Reg. No. 78-96-6). | E.I. duPont de Nemours and Company Inc. | For use in paper and paperboard. | Limitations/ Specifi- cations |
December 24, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
E.I. duPont de Nemours and Company Inc. | ||||||||||||||||||||||||||||||||
374 | Poly(12-hydroxystearic acid) end-capped with stearic acid (CAS Reg. No. 58128-22-6). | Lubrizol, Ltd. | The FCS will be used: 1. As a colorant dispersant at levels not to exceed 0.1 percent by weight in the manufacture of food-contact polymers. 2. As a nucleating agent at levels not to exceed 0.012 weight percent in olefin polymers complying with 21 CFR 177.1520(c), items 1.1, 3.1, and 3.2. The copolymers complying with items 3.1 and 3.2 shall contain not less than 85 weight percent of polymer units derived from propylene. |
Limitations/ Specifi- cations |
December 25, 2003 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Lubrizol, Ltd. | ||||||||||||||||||||||||||||||||
375 | Poly(tricyclo[5.2.1.0(2,6)]decane-3,5-diyl-ethylene)-co-(bicyclo[3.3.0]octane-2,4-diyl-ethylene)- co-(tricyclo[6.4.0.0(2,6)]dodecane-3,5-diyl-ethylene)]. | ZEON Corporation | As a plastic base resin to be employed in the manufacture of food-contact articles intended for repeat-use. | Limitations/ Specifi- cations |
March 6, 2004 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
ZEON Corporation | ||||||||||||||||||||||||||||||||
376 | Polyethylene terephthalate copolyesters (diethylene glycol-isophthalate modified), prepared by the condensation of dimethyl terephthalate or terephthalic acid and ethylene glycol with one or more of the following: dimethyl isophthalate, isophthalic acid, and diethylene glycol. The finished polymer shall contain a total of not more than 10 mole-percent of diethylene glycol and isophthalate units, with the diethylene glycol content expressed as a mole-percent of the total glycol units and the isophthalate content expressed as a mole-percent of the total isophthalate/terephthalate units. | The Dow Chemical Company Equipolymers s.r.1. Dow Olefinverbund GmbH Equipolymers GmbH |
For use as films or articles intended for contact with aqueous, acidic, low-alcohol, and fatty foods under Conditions of Use A through H as described in Table 2, and for use in contact with high-alcohol foods under Conditions of Use E through G as described in Table 2. | Limitations/ Specifi- cations |
December 31, 2003 | EA /FONSI | ||||||||||||||||||||||||||
The Dow Chemical Company Equipolymers s.r.1. Dow Olefinverbund GmbH |
||||||||||||||||||||||||||||||||
377 | 5,7-Bis(1,1-dimethylethyl)-3-hydroxy-2(3H)-benzofuranone, reaction products with o-xylene (CAS Reg. No. 181314-48-7). | Ciba Specialty Chemicals Corporation | The FCS will be used as an antioxidant for styrene block polymers complying with the provisions of 21 CFR 177.1810. | Limitations/ Specifi- cations |
January 1, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
379 | Aromatic petroleum hydrocarbon resin, hydrogenated (CAS Reg. No. 88526-47-0), produced by the catalytic polymerization of aromatic substituted olefins from low boiling distillates of cracked petroleum stocks with a boiling point no greater that 220°C (428°F), and the subsequent catalytic reduction of the resulting aromatic petroleum hydrocarbon resin. | Arakawa Chemical Industries, Ltd. | As a component of polymer blends intended for use as films and coatings that consist predominantly of ethylene vinyl acetate copolymer. | Limitations/ Specifi- cations |
January 7, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Arakawa Chemical Industries, Ltd. | ||||||||||||||||||||||||||||||||
380 | 1,3-Benzenedicarboxylic acid, polymer with 1,4-benzenedicarboxylic acid and 1,6-hexanediamine (CAS Reg. No. 25750-23-6). The FCS is manufactured according to the monomer composition specified in the notification. | EMS-Chemie AG | For use as a component of repeat-use food-contact articles. | Limitations/ Specifi- cations |
January 7, 2004 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
EMS-Chemie AG | ||||||||||||||||||||||||||||||||
381 | REPLACED BY FCN #449 | |||||||||||||||||||||||||||||||
384 | 35 percent Ammonium Bromide Solution (CAS Reg. No. 12124-97-9). | AmeriBrom, Inc. | As a component of a slimicide used in the production of paper and paperboard. | Limitations/ Specifi- cations |
January 9, 2004 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
AmeriBrom, Inc. | ||||||||||||||||||||||||||||||||
385 | Tris (2,4-di-tert-butylphenyl)phosphite (CAS Reg. No. 31570-04-4). | Ciba Specialty Chemicals Corporation | The FCS will be used as an antioxidant in the manufacture of olefin polymers complying with the provisions of 21 CFR 177.1520(c), items 3.2c and 3.6. | Limitations/ Specifi- cations |
January 13, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
386 | Octadecyl, 3,5-di-tert-butyl-4-hydroxyhydrocinnamate (CAS Reg. No. 2082-79-3). | Ciba Specialty Chemicals Corporation | As an antioxidant for olefin polymers. | Limitations/ Specifi- cations |
January 13, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
387 | Siloxanes and silicones, di-Me, polymers with silica-1,1,1-trimethyl-N-(trimethylsilyl)silanamine hydrolysis products and silicic acid trimethylsilyl ester (CAS Reg. No. 159002-21-8). | General Electric Company | As a defoamer in the pulping of lignocellulosic materials that will be used to make food-contact paper and paperboard. | Limitations/ Specifi- cations |
January 14, 2004 | EA /FONSI | ||||||||||||||||||||||||||
General Electric Company | ||||||||||||||||||||||||||||||||
388 | Mixture of potassium stearyl phosphate (CAS Reg. No. 68987--29-1), polyoxyethylene lauryl ether phosphate potassium salt, and polyoxyethylene tridecyl ether phosphate potassium salt. | E.I. du Pont de Nemours and Company, Inc. | For use as a finish component on poly(phenyleneterephthalamide) resins cleared in 21 CFR 177.1632 for repeated-use applications. | Limitations/ Specifi- cations |
January 30, 2004 | EA /FONSI | ||||||||||||||||||||||||||
E.I. du Pont de Nemours and Company, Inc. | ||||||||||||||||||||||||||||||||
389 | A mixture of imidazolium and imidazoline compounds, 1H-imidazolium, 1-ethyl-2-(8Z)-8-heptadecenyl-4,5-dihydro-1- [2-[[(9Z)-1-oxo-9-octadecenyl]amino]ethyl]-, ethyl sulfate (CAS Reg. No. 67846-14-4) and 9-octadecenamide, N-[2-[2-(8Z)-8-heptadecenyl-4,5-dihydro- 1H-imidazol-1-yl]ethyl]-, (9Z)- (CAS Reg. No. 63441-26-9). | Goldschmidt Chemical Corporation | The FCS may be used as a debonding agent in food-contact paper and paperboard at levels not to exceed 0.5 percent by weight of the dry paper and paperboard. | Limitations/ Specifi- cations |
February 4, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Goldschmidt Chemical Corporation | ||||||||||||||||||||||||||||||||
391 | Chlorine dioxide (CAS Reg. No. 10049-04-4). | Eka Chemicals, Inc., an Akzo Noble Company | The FCS will be used as a slimicide in process water during the manufacture of paper and paperboard intended to contact food. | Limitations/ Specifi- cations |
February 20, 2004 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
Eka Chemicals, Inc., an Akzo Noble Company | ||||||||||||||||||||||||||||||||
392 | Acrylonitrile-butadiene copolymer crosslinked with divinylbenzene (CAS Reg. No. 9003-18-3). | Eliokem, Inc. | As a component of films used in contact with food and as a component of articles used in repeated use food-contact applications. | Limitations/ Specifi- cations |
April 2, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Eliokem, Inc. | ||||||||||||||||||||||||||||||||
393 | Phosphonic acid, [[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]methyl]-, diethyl ester (CAS Reg. No. 976-56-7). | Ciba Specialty Chemicals Corporation | As a chemically bound component of the polymeric backbone for use in polyethylene terephthalate homopolymers as described in 21 CFR 177.1630(e)(4)(ii) items 2 and 3, and complying with all applicable provisions of 21 CFR 177.1630. | Limitations/ Specifi- cations |
February 25, 2004 | Contact | ||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
395 | Copolymer of n-butyl methacrylate and iso-butyl methacrylate (CAS Reg. No. 9011-53-4). | Lucite International UK, Ltd. | As a pigment dispersant for use in all pigmented food-contact plastics. | Limitations/ Specifi- cations |
March 18, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Lucite International UK, Ltd. | ||||||||||||||||||||||||||||||||
398 | Perfluoropolyether dicarboxylic acid (CAS Reg. No. 69991-62-4), ammonium salt. | Solvay Solexis S.p.A. | As an oil and water repellent in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
April 13, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Solvay Solexis S.p.A. | ||||||||||||||||||||||||||||||||
399 | Nylon MXD-6 (CAS Reg. No. 25718-70-1) (also known as hexanedioic acid, polymer with 1,3-benzenedimethanamine) meeting the analytical specifications in 21 CFR 177.1500(b) item 10.1 and used in conjunction with cobalt neodecanoate (CAS Reg. No. 27253-31-2). | Constar International, Inc. | The FCS will be used as a modifier of ethylene phthalate/naphthalate polymers and copolymers, excluding those modified with organic anhydrides. | Limitations/ Specifi- cations |
June 12, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Constar International, Inc. | ||||||||||||||||||||||||||||||||
401 | Silicon Dioxide (CAS Reg. No. 7631-86-9). | Toyo Seikan Kaisha, Ltd. | To be used as an amorphous plasma-deposited silicon barrier coating on the food-contact surface of PET food packaging articles. | Limitations/ Specifi- cations |
April 29, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Toyo Seikan Kaisha, Ltd. | ||||||||||||||||||||||||||||||||
402 | A copolymer of tetrafluoroethylene and perfluoromethylvinyl ether (CAS Reg. No. 26425-79-6) \ modified with 3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-1,9-diene and 1,3,5-triallyl cyanurate or 1,3,5-triallyl isocyanurate. | Precision Polymer Engineering, Ltd. | As a gasket or seal for food processing equipment. | Limitations/ Specifi- cations |
July 2, 2004 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Precision Polymer Engineering, Ltd. | ||||||||||||||||||||||||||||||||
403 | 2-[2,4-bis(1,1-dimethylethyl)phenoxy]5-butyl-5-ethyl-1,3,2-dioxaphosphorinane,(CAS Reg. No. 180071-71-0), which may contain not more than 1 percent by weight triisopropanolamine (CAS Reg. No. 122-20-3). | Crompton Corporation | 1) As an antioxidant at levels not to exceed 0.16 percent by weight in linear low density
polyethylene complying with 21 CFR 177.1520(c), items 3.1 and 3.2, where the density of the polymer
is not greater than 0.94 gram per cubic centimeter. 2) As an antioxidant at levels not to exceed 0.16 percent by weight in repeated use food-contact articles. |
Limitations/ Specifi- cations |
April 29, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Crompton Corporation | ||||||||||||||||||||||||||||||||
404 | 4,4'-[Isopropylidenebis(p-phenyleneoxy)]diphthalic dianhydride/4,4'-diaminodiphenyl sulfone copolymer (CAS Reg. No. 77699-82-2). | SABIC Innovative Plastics | The FCS will be used as a component of repeated-use food contact articles intended for use in contact with all food types with no temperature limitation. | Limitations/ Specifi- cations |
May 13, 2004 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
405 | Ethylene-2-norbornene copolymer (CAS Reg. No. 26007-43-2). The CAS nomenclature is bicyclo{2.2.1} hept-2-ene, polymer with ethene. | Topas Advanced Polymers Incorporated | As a basic polymer used in the production of articles intended to contact food. | Limitations/ Specifi- cations |
May 20, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Topas Advanced Polymers Incorporated | ||||||||||||||||||||||||||||||||
406 | Hexanedioic acid, polymer with azacyclotridecan-2-one and alpha-hydro-omega-hydroxypoly(oxy- 1,2-ethanediyl) (CAS Reg. No. 70290-02-7). | Ciba Specialty Chemicals Corporation | As an antistatic agent for polymers in contact with non-fatty dry foods. | Limitations/ Specifi- cations |
July 12, 2004 | EA /FONSI | ||||||||||||||||||||||||||
ATOFINA Chemicals | ||||||||||||||||||||||||||||||||
407 | 2-Bromo-2-nitro-1,3-propanediol (CAS Reg. No. 52-51-7). | GE Betz | As a preservative for boiler water additive formulations. | Limitations/ Specifi- cations |
June 19, 2004 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
GE Betz | ||||||||||||||||||||||||||||||||
408 | C16-18 fatty acid esters of a branched C20 alcohol as described in the notification. | COGNIS Deutschland GmbH & Co KG | To be used as a lubricant/release agent in the manufacture of repeat-use, food-contact polycarbonate. | Limitations/ Specifi- cations |
June 22, 2004 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
COGNIS Deutschland GmbH & Co KG | ||||||||||||||||||||||||||||||||
411 | Copper,(1,3,8,16,24-hexabromo-2,4,9,10,11,15,17,22,23,25- decachloro-29H,31H-phthalocyanato(2-)-N29,N30,N31,N32)-,(SP-4-2)- (CAS Reg. No. 14302-13-7). | BASF Corporation | As a colorant in all types of food-contact polymers. | Limitations/ Specifi- cations |
October 2, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
413 | Polyester-polyurethane resin-acid dianhydride adhesives. | Dainippon Ink and Chemicals, Inc. | For use as an adhesive in laminate structures that are intended for use at retort temperatures. | Limitations/ Specifi- cations |
July 6, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Dainippon Ink and Chemicals, Inc. | ||||||||||||||||||||||||||||||||
415 | A blend of LDPE and LDPE grafted with vinyltrimethoxysilane (LDPE/VTMOS-LDPE) containing up to 50 percent LDPE grafted with vinyltrimethoxysilane (VTMOS-LDPE). | Tetra Pak, Inc. | For use in fabricating beverage containers. | Limitations/ Specifi- cations |
September 11, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Tetra Pak, Inc. | ||||||||||||||||||||||||||||||||
416 | Diphosphoric acid, polymers with ethoxylated reduced methyl esters of reduced polymerized oxidized tetrafluoroethylene (CAS Reg. No. 200013-65-6). This substance is also known as phosphate esters of ethoxylated perfluoroether, prepared by reaction of ethoxylated perfluoroether diol (CAS Reg. No. 162492-15-1) with phosphorous pentoxide (CAS Reg. No. 1314-56-3) or pyrophosphoric acid (CAS Reg. No. 2466-09-3). | Solvay Solexis S.p.A. | As a water and oil repellent in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
July 27, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Solvay Solexis S.p.A. | ||||||||||||||||||||||||||||||||
417 | 1,3-benzenedicarboxylic acid, polymer with 1,4-benzenedicarboxylic acid, 1,6-hexanediamine and 4,4'-methylenebis[2-methylcyclohexanamine] (CAS Reg. No. 112754-95-7). | EMS-Chemie AG/EMS Chemie (North America) Inc. | As a component of non-food-contact layers of multilayer films. | Limitations/ Specifi- cations |
July 30, 2004 | EA /FONSI | ||||||||||||||||||||||||||
EMS-Chemie AG/EMS Chemie (North America) Inc. | ||||||||||||||||||||||||||||||||
418 | Alpha-sulfo-omega (dodecyloxy) poly (oxyethylene) sodium salt (CAS Reg. No. 9004-82-4). | BASF Aktiengesellschaft | For use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard complying with 21 CFR Sections 176.170 and 176.180 in contact with all types of food under Conditions of Use A through H. | Limitations/ Specifi- cations |
July 30, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
419 | n-octyl phosphonic acid (NOPA)- modified titanium dioxide, (produced by chemically reacting NOPA (CAS Reg. No. 4724-48-5) with titanium dioxide to achieve a treatment level of 0.85% by weight of NOPA on the pigment). | Huntsman Tioxide/Tioxide Europe S.A.S./Tioxide Europe S.L. | For use as a colorant in all types of food-contact polymers. | Limitations/ Specifi- cations |
July 31, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Huntsman Tioxide/Tioxide Europe S.A.S./Tioxide Europe S.L. | ||||||||||||||||||||||||||||||||
420 | 2-butyl-2-ethyl-1,3-propanediol (CAS Reg. No. 115-84-4). | Perstorp Polyols, Inc. | As a polyol monomer in the synthesis of polyester resins used to produce coatings, specifically coating binder resins, for use as can coatings and adhesives for single use in food contact applications. | Limitations/ Specifi- cations |
August 4, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Perstorp Polyols, Inc. | ||||||||||||||||||||||||||||||||
421 | Poly(terephthaloyl chloride/p-phenylenediamine) (CAS Reg. No. 26125-61-1). | E.I. du Pont de Nemours and Company, Inc. | For use as a microwave susceptor base aramid paper having a maximum basis weight of 20 pounds per 1000 square feet. | Limitations/ Specifi- cations |
August 4, 2004 | EA /FONSI | ||||||||||||||||||||||||||
E.I. du Pont de Nemours and Company, Inc. | ||||||||||||||||||||||||||||||||
423 | Copolymers produced by the polymerization of 6-hydroxy-2-naphthoic acid with one or more of the following monomers: 4-hydroxybenzoic acid; 4,4'-biphenol; N-(4-hydroxyphenyl)acetamide; terephthalic acid; resorcinol; and isophthalic acid such that a minimum of 55 percent of the polymer units are derived from 6-hydroxy-2-naphthoic acid alone or in combination with 4-hydroxybenzoic acid, not more than 25 percent of the polymer units are derived individually from 4,4'-biphenol, N-(4-hydroxyphenyl)acetamide and terephthalic acid, and not more than 15 percent of the polymer units are derived individually from resorcinol and isophthalic acid. The copolymers should be manufactured and characterized as described in the notification. | Ticona | As a basic polymer used in the production of articles (including bottles) intended to contact food. | Limitations/ Specifi- cations |
August 11, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Ticona | ||||||||||||||||||||||||||||||||
424 | Ethylene/octene copolymers containing up to 50 weight percent polymer units derived from 1-octene (CAS Reg. No. 26221-73-8). | The Dow Chemical Company | As articles or components of articles used in contact with all types of food under Conditions of Use A through H, as described in Table 2. | Limitations/ Specifi- cations |
October 7, 2004 | EA /FONSI | ||||||||||||||||||||||||||
The Dow Chemical Company K-Dow Petrochemicals BV |
||||||||||||||||||||||||||||||||
425 | Hexanedioic acid, polymer with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol, α-hydro-ω-hydroxypoly(oxy-1,4-butanediyl), 3-methyl-1,5-pentanediol and 1-methyl-1,3-propanediyl bis [(6-isocyanatohexyl)carbamate] (CAS Reg. No. 622366-97-6). | Japan Crown Cork Co. Ltd. | As a sealing gasket for glass jars and bottles. | Limitations/ Specifi- cations |
August 20, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Japan Crown Cork Co. Ltd. | ||||||||||||||||||||||||||||||||
426 | Quino[2,3-b]acridine-7,14-dione,5,12-dihydro-2,9-dimethyl, also known as diemethylquinacridone and C.I. Pigment Red 122 (CAS Reg. No. 980-26-7). | Sun Chemical Corporation | As a colorant in food-contact polymers. | Limitations/ Specifi- cations |
August 27, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Sun Chemical Corporation | ||||||||||||||||||||||||||||||||
427 | Propenoic acid, homopolymer, sodium salt (CAS Reg. No. 9003-04-7). | Stockhausen, Inc. | For use as an absorbent in food-contact materials. | Limitations/ Specifi- cations |
September 1, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Stockhausen, Inc. | ||||||||||||||||||||||||||||||||
428 | REPLACED BY FCN 537 | Limitations/ Specifi- cations |
||||||||||||||||||||||||||||||
429 | Copolymer of styrene (CAS Reg. No. 100-42-5), methyl methacrylate (CAS Reg. No.80-62-6), and glycidyl methacrylate (CAS Reg. No. 106-91-2). | SABIC Innovative Plastics and BASF Corporation |
For use as a polymeric chain extender in repeated use polymers in contact with all food types and under conditions of use A through H. | Limitations/ Specifi- cations |
October 30, 2004 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
SABIC Innovative Plastics and BASF Corporation |
||||||||||||||||||||||||||||||||
430 | Metallic pigment comprised of borosilicate glass flakes, 70 to 95 percent, coated with pure silver metal, 5 to 30 percent by weight. | The Shepherd Color Company | As a colorant for polymers in contact with food. | Limitations/ Specifi- cations |
September 2, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Energy Strategy Associates/ The Shepherd Color Company |
||||||||||||||||||||||||||||||||
431 | Tin(IV) Oxide (CAS Reg. No. 18282-10-5). | EMD Chemicals Inc. | For use in combination with silicon dioxide and titanium dioxide as a colorant for food-contact polymers, paper and paperboard, coatings, and in printing inks applied to non-food-contact surfaces of food-contact articles. | Limitations/ Specifi- cations |
September 8, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
EMD Chemicals Inc. | ||||||||||||||||||||||||||||||||
432 | Silver-magnesium-calcium-phosphate-borate-glass. | Ishizuka Glass Co., Ltd. | As an antimicrobial agent in all polymers. | Limitations/ Specifi- cations |
October 13, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ishizuka Glass Co., Ltd. | ||||||||||||||||||||||||||||||||
433 | Silver-magnesium-aluminum-phosphate glass. | Ishizuka Glass Co., Ltd. | As an antimicrobial agent in all polymers. | Limitations/ Specifi- cations |
October 12, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ishizuka Glass Co., Ltd. | ||||||||||||||||||||||||||||||||
434 | Silver-magnesium-calcium-phosphate-borate-glass. | Ishizuka Glass Co., Ltd. | As an antimicrobial agent in all polymers. | Limitations/ Specifi- cations |
October 12, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ishizuka Glass Co., Ltd. | ||||||||||||||||||||||||||||||||
435 | Poly (ethylene-maleic anhydride) grafted cyclodextrin(s). | Cellresin Technologies, LLC Equistar Chemicals, LP |
For use as an adjuvant in the manufacture of polymer beverage container closures and beverage and food container seals. | Limitations/ Specifi- cations |
September 14, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Cellresin Technologies, LLC Equistar Chemicals, LP |
||||||||||||||||||||||||||||||||
436 | 1,4-Dioxa-8-azaspiro[4.5]decane, 7,7,9,9-tetramethyl- (CAS Reg. No. 36793-27-8) | Degussa Corporation | As a catalyst in the manufacture of pulp used to manufacture food-contact paper. | Limitations/ Specifi- cations |
November 20, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Degussa Corporation | ||||||||||||||||||||||||||||||||
437 | Ethoxylated primary linear alcohols of greater than 10% ethylene oxide by weight, having molecular weights of 390 - 7,000 (CAS Reg. No. 97953-22-5). | Baker Petrolite - Polymers Division | The FCS will be used as a surface active agent in polypropylene polymers at levels not to exceed 1.5 percent by weight of the finished article. | Limitations/ Specifi- cations |
October 15, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Baker Petrolite - Polymers Division | ||||||||||||||||||||||||||||||||
438 | Monoisopropanolamine (MIPA) (CAS Reg. No. 78-96-6) | E.I. du Pont de Nemours and Company, Inc. | For use as a dispersant for titanium dioxide pigment suspensions used in the manufacture of paper and paperboard at levels not to exceed 0.68 percent by weight of the titanium dioxide. | Limitations/ Specifi- cations |
September 17, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
The Dow Chemical Company | ||||||||||||||||||||||||||||||||
439 | Industrial starch modified by treatment with greater than 5 percent and not more than 21 percent by weight 2,3-epoxypropyltrimethyl-ammonium chloride (CAS Reg. No. 56780-58-6). | Roquette Frères | For use as a retention aid and/or drainage aid and/or dry-strength agent employed prior to the sheet forming operation in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
October 27, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Roquette Frères | ||||||||||||||||||||||||||||||||
442 | Alcohol ethoxylate in which the alcohol contains from 12 to 22 carbon atoms and the ethoxylate chain contains from 4 to 20 repeating ethoxylate units. | Lubrizol Advanced Materials | For use as a component of a mixture intended for use as a thickener for hand sanitizers used in food service establishments. | Limitations/ Specifi- cations |
November 23, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Lubrizol Advanced Materials | ||||||||||||||||||||||||||||||||
443 | Agarose, polymer with (chloromethyl)oxirane, 2-hydroxy-3(3-sulfopropoxy)propyl ethers, sodium salts (CAS Reg. No. 676618-71-6). | Amersham Biosciences | As an ion exchange resin. | Limitations/ Specifi- cations |
September 29, 2004 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Amersham Biosciences | ||||||||||||||||||||||||||||||||
444 | Poly(isophthaloyl chloride/m-phenylenediamine) (CAS Reg. No. 25765-47-3) | E.I. du Pont de Nemours and Company, Inc. | For use as a microwave susceptor base material in aramid paper having a maximum basis weight of 20 pounds per 1000 square feet. | Limitations/ Specifi- cations |
August 4, 2004 | EA /FONSI | ||||||||||||||||||||||||||
E.I. du Pont de Nemours and Company, Inc. | ||||||||||||||||||||||||||||||||
445 | Chlorine Dioxide | Selective Micro Technologies, LLC | As an antimicrobial agent in water used in poultry processing and to wash fruits and vegetables that are not raw agricultural commodities in an amount not to exceed 3 ppm residual chlorine dioxide as determined by Method 4500-ClO2-E in the "Standard Methods for the Examination of Water and Wastewaters" 18th e.d., 1992, or an equivalent method. | Limitations/ Specifi- cations |
October 1, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Selective Micro Technologies, LLC | ||||||||||||||||||||||||||||||||
446 | Di-µ-chlorobis((1,2,5,6-eta)-1,5-cyclooctadiene)dirhodium (CAS Reg. No. 12092-47-6). | Wacker Chemical Corporation (formerly known as Wacker Silicones Corporation) | For use as a catalyst in the preparation of silicone elastomers complying with 21 CFR 177.2600. | Limitations/ Specifi- cations |
October 5, 2004 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Wacker Chemical Corporation (formerly known as Wacker Silicones Corporation) | ||||||||||||||||||||||||||||||||
447 | An aqueous mixture of peroxyacetic acid (CAS Reg. No. 79-21-0), hydrogen peroxide (CAS Reg. No.7722-84-1), acetic acid (CAS Reg. No. 64-19-7), sulfuric acid (CAS Reg. No. 7664-93-9), and 1-hydroxyethylidine-1,1-diphosphonic acid (HEDP) (CAS Reg. No. 2809-21-4) | Enviro Tech Chemical Services, Inc. | To control microbial growth in wash water that contacts fruits and vegetables that are not raw agricultural commodities. | Limitations/ Specifi- cations |
October 14, 2004 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
Enviro Tech Chemical Services, Inc. | ||||||||||||||||||||||||||||||||
448 | Polyester-polyurethane resin formulated from: (a)(1) Polyester-polyurethanediol resins prepared by the reaction of a mixture of polybasic acids and polyhydric alcohols listed in 21 CFR 175.300(b)(3)(vii) and 1,6-hexanediol (CAS Reg. No. 629-11-8), dimethylolbutanoic acid (CAS Reg. No. 10097-02-6), 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate (CAS Reg No. 4098-71-9), and/or 1,3-bis(isocyanatomethyl)benzene (CAS Reg. No. 25854-16-4). The FCS will be manufactured and characterized as described in the notification. (2) An optional trimethoxysilane coupling agent containing an epoxy group, as described in the notification, not to exceed 3 percent by weight of the cured adhesive. (b) Urethane cross-linking agent comprising not more than 20 percent by weight of the cured adhesive, and formulated from trimethylolpropane (CAS Reg. No. 77-99-6) adduct of 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate and/or trimethylolpropane adduct of 1,3-bis(isocyanatomethyl)benzene and/or 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate cyanurate (CAS Reg. No. 53880-05-0). The content of the 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate cyanurate shall not exceed 14 percent by weight of the cured adhesive. |
Perstorp Polyols, Inc. Rock Paint Co., Ltd. |
For use as an adhesive in laminate structures that are intended for use at retort temperatures. | Limitations/ Specifi- cations |
October 15, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Perstorp Polyols, Inc. Rock Paint Co., Ltd. |
||||||||||||||||||||||||||||||||
449 | REPLACED BY FCN #708 | Limitations/ Specifi- cations |
||||||||||||||||||||||||||||||
450 | An aqueous solution of sodium chlorite and chlorine dioxide containing up to 1200 mg/kg sodium chlorite and up to 30 mg/kg chlorine dioxide. | Bio-cide International, Inc. | As an antimicrobial agent in the processing of red meat, red meat parts and organs, and on processed, comminuted, and formed meat products as a component of a dip or a spray. | Limitations/ Specifi- cations |
November 4, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Bio-cide International, Inc. | ||||||||||||||||||||||||||||||||
451 | 2-Propenoic acid, 2-methyl-, dodecyl ester, polymer with docosyl 2-propenoate, eicosyl 2-propenoate, octadecyl 2-propenoate and tetradecyl 2-methyl-2-propenoate (CAS Reg. No. 470469-55-7) | Toho Chemical Industry Company, Ltd. | As a processing aid (filter aid) in the production of petroleum wax that will be used on food packaging for single use food contact applications. | Limitations/ Specifi- cations |
January 21, 2005 | EA /FONSI | ||||||||||||||||||||||||||
Toho Chemical Industry Company, Ltd. | ||||||||||||||||||||||||||||||||
452 | Styrene-methyl methacrylate-butyl acrylate-butadiene copolymer. | INEOS NOVA LLC | The FCS will be used as a base polymer in contact with food, excluding film or coating applications. | Limitations/ Specifi- cations |
November 10, 2004 | EA /FONSI | ||||||||||||||||||||||||||
INEOS NOVA LLC | ||||||||||||||||||||||||||||||||
453 | 1,3-dibromo-5,5-dimethylhydantoin (DBDMH; CAS Reg. No. 77-48-5) | Albemarle Poultry Sciences, LLC | For general use as an antimicrobial agent in water used in poultry processing for disinfecting poultry carcasses and their parts and organs. | Limitations/ Specifi- cations |
November 10, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Albemarle Poultry Sciences, LLC | ||||||||||||||||||||||||||||||||
454 | [1,1'-biphenyl]-4,4'-diol, polymer with 1,1'-sulfonylbis[4-chlorobenzene] (CAS Reg. No. 25608-64-4). | Solvay Advanced Polymers, LLC | The FCS will be used as a resin in the manufacture of molded repeat-use food-contact articles. | Limitations/ Specifi- cations |
November 10, 2004 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Solvay Advanced Polymers, LLC | ||||||||||||||||||||||||||||||||
455 | N-phenylbenzenamine reaction products with 2,4,4-trimethylpentene (CAS Reg. No. 68411-46-1). | Ciba Specialty Chemicals Corporation | As an antioxidant/stabilizer in food-contact adhesives. | Limitations/ Specifi- cations |
November 16, 2004 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
456 | Sodium sulfate salt of ethoxylated (7 moles of ethylene oxide) n- and iso-undecyl alcohol (C11) (CAS Reg. No. 219756-63-5). | Clariant GmbH | For use as an emulsifier in the production of acrylic and modified acrylic polymers and vinyl acetate copolymers used as pigment binders in coatings for paper and paperboard complying with 21 C.F.R. Sections 176.170 and 176.180 in contact with all types of food. | Limitations/ Specifi- cations |
November 25, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Clariant GmbH | ||||||||||||||||||||||||||||||||
458 | Tetracarbonyl di-µ-chlorodirhodium (I) (CAS Reg. No. 14523-22-9) Trade name: Rhodium carbonyl chloride dimer Formula: (Rh(CO)2Cl)2 |
Wacker Chemical Corporation | As a catalyst to accelerate the cross-linking reaction of vinyl-functionalized polydimethylsiloxanes with hydrogen-functionalized polydimethylsiloxanes in forming a silicone elastomer that will be used in repeat use articles such as baking molds and milk tubes, which may contact all food types under all conditions, consistent with the limitations of 21 CFR177.2600(c)(4)(i). | Limitations/ Specifi- cations |
November 30, 2004 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Wacker Chemical Corporation | ||||||||||||||||||||||||||||||||
459 | Styrene-maleic anhydride copolymer, sodium salt (CAS Reg. No. 25736-61-2). | Asahi Kasei Chemicals Corporation | The FCS will be used as a surfactant in the manufacture of styrene-1,3 butadiene and styrene-1,3 butadiene, hydrogenated block copolymers. | Limitations/ Specifi- cations |
December 3, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Asahi Kasei Chemicals Corporation | ||||||||||||||||||||||||||||||||
460 | Benzenemethanaminium, N,N-dimethyl-N-(2-(2-(4-(1,1,3,3,-tetramethylbutyl)phenoxy)ethoxy)-ethyl)-,chloride (CAS Reg. No. 121-54-0) also known as Benzethonium Chloride USP | Lonza, Inc. | As an antimicrobial agent in no-rinse hand sanitizers for food handlers. | Limitations/ Specifi- cations |
December 7, 2004 | EA /FONSI | ||||||||||||||||||||||||||
Lonza, Inc. | ||||||||||||||||||||||||||||||||
461 | The FCS is a cross-linked reaction product of an acrylic resin, a silane coupling agent,
and a urethane polymer. This reaction product is formed in situ as a layer applied to an appropriate base film. The acrylic resin consists of a copolymer of styrene (CAS Reg. No. 100-42-5), methyl methacrylate (CAS Reg. No.80-62-6), methacrylic acid(CAS Reg. No. 79-41-4), t-butyl methacrylate (CAS Reg. No.585-07-9), and hydroxyethyl methacrylate (CAS Reg. No.868-77-9). The silane coupling agent consists of γ-isocyanatopropyl-trimethoxysilane (IPSi) (CAS Reg. No. 15396-00-6). The urethane prepolymer is an NCO-terminated prepolymer consisting of trimethylol propane (CAS Reg. No. 77-99-6) adducts of 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate (isophorone diisocyanate, or IPDI) and 1,3-bis(isocyanatomethyl)benzene (m-xylylene diisocyanate, m-XDI). |
Toppan Printing Company, Ltd. | As a non-food contact layer in multilayer films intended for use in packaging food of all types under the Conditions of Use B through H as defined in Table 2. | Limitations/ Specifi- cations |
December 9, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Toppan Printing Company, Ltd. | ||||||||||||||||||||||||||||||||
462 | Cross-linked reaction product of polyvinyl alcohol (PVOH; CAS Reg. No. 9002-89-5) and tetraethoxysilane (TEOS; CAS Reg. No. 78-10-4). | Toppan Printing Company, Ltd. | As a non-food contact layer in multilayer films intended for use in packaging food of all types under the Conditions of Use B through H as defined in Table 2. | Limitations/ Specifi- cations |
December 9, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Toppan Printing Company, Ltd. | ||||||||||||||||||||||||||||||||
463 | 1,3-Benzenedicarbonyl dichloride, polymer with 1,4-benzenedicarbonyl dichloride, 1,3-benzenediol, carbonic dichloride and 4,4'-(1-methylethylidene) bisphenol, 4-(1-methyl-1-phenylethyl)phenyl ester (CAS Reg. No. 235420-85-6). | SABIC Innovative Plastics | The FCS may be used neat or in blends with polycarbonate resins, in articles or components of articles intended for single and repeat-use food contact applications. | Limitations/ Specifi- cations |
February 12, 2005 | EA/FONSI | ||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
464 | C.I. Pigment Yellow 163 (CAS Reg. No. 68186-92-5). | BASF Corporation | As a colorant in single- and repeat-use polymeric, food-contact articles. | Limitations/ Specifi- cations |
December 17, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
465 | N,N'-1,6-hexanediylbis[2-amino-benzamide] (CAS Reg. No. 103956-07-6) | The Coca-Cola Company Clariant Life Science Molecules (America), Inc. INVISTA S.àr.1. |
For use as a scavenger for acetaldehyde in polyethylene terephthalate (PET) beverage bottles. | Limitations/ Specifi- cations |
December 17, 2004 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
The Coca-Cola Company Clariant Life Science Molecules (America), Inc. INVISTA S.àr.1. |
||||||||||||||||||||||||||||||||
469 | Industrial starch modified by treatment with greater than 5 percent and not more than 21 percent by weight of 2,3-epoxypropyl trimethylammonium chloride (CAS Reg. No. 3303-77-0). | Lyckeby Stärkelsen Industrial Starches AB Penford Products Company |
As a retention aid and/or drainage aid and/or dry strength agent employed prior to the sheet forming operation in the manufacture of food-contact paper and paperboard at a maximum level of 1 percent by weight of the dry pulp. | Limitations/ Specifi- cations |
February 25, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Lyckeby Stärkelsen Industrial Starches AB Penford Products Company |
||||||||||||||||||||||||||||||||
472 | REPLACED BY FCN #526 | Limitations/ Specifi- cations |
||||||||||||||||||||||||||||||
473 | 2,6-naphthalenedicarboxylic acid, polymer with 1,4-benzenedicarboxylic acid, 1,4-butanediol and 4,4'-(1,3,6,8-tetrahydro-1,3,6,8-tetraoxobenzo[lmn][3,8]phenanthroline-2,7-diyl)bis[benzoic acid]. | Mitsubishi Chemical Corporation | As an ultraviolet light absorber in polyethylene phthalate polymers complying with 21 CFR 177.1630 used in contact with foods. | Limitations/ Specifi- cations |
February 3, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Mitsubishi Chemical Corporation | ||||||||||||||||||||||||||||||||
474 | Tetradecanoic acid; lithium salt (CAS Reg. No. 20336-96-3). | ASAHI DENKA Co., Ltd. | As a stabilizer for polypropylene polymers and copolymers complying with 21 CFR 177.1520(c), items 1.1, 3.1, and 3.2. | Limitations/ Specifi- cations |
February 9, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
ASAHI DENKA Co., Ltd. | ||||||||||||||||||||||||||||||||
475 | Polylactide (PLA) polymers containing from 6 to 16 weight percent D-lactic acid polymer units (High D PLA; CAS Reg. No. 9051-89-2). The polymers will be manufactured and characterized as further described in the notification. | NatureWorks LLC | As a component in the manufacture of articles intended to contact food. | Limitations/ Specifi- cations |
February 11, 2005 | EA/FONSI | ||||||||||||||||||||||||||
NatureWorks LLC | ||||||||||||||||||||||||||||||||
476 | Silver-zinc-magnesium-aluminum-calcium-sodium-borate-phosphate glass. | Ishizuka Glass Co. Ltd. | As an antimicrobial agent in all types of food contact polymers. | Limitations/ Specifi- cations |
February 15, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ishizuka Glass Co. Ltd. | ||||||||||||||||||||||||||||||||
477 | Poly(oxy-1,2-ethanediyl), alpha-eicosyl-omega-hydroxy- (CAS Reg. No. 26636-39-5). | Dr. W. Kolb AG | For use as an antistatic agent in polypropylene polymers and copolymers. | Limitations/ Specifi- cations |
February 15, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Dr. W. Kolb AG | ||||||||||||||||||||||||||||||||
479 | Copolymer of vinylidene chloride and butyl acrylate (CAS Reg. No. 9011-09-0), containing up to 10 weight percent polymer units derived from butyl acrylate. | The Dow Chemical Company | The FCS will be used in the manufacture of articles or components of articles intended to contact food. | Limitations/ Specifi- cations |
March 1, 2005 | EA/FONSI | ||||||||||||||||||||||||||
The Dow Chemical Company | ||||||||||||||||||||||||||||||||
480 | Alpha alkene (C20-C24) polymers with maleic anhydride reaction products with 2,2,6,6-tetramethyl-4-piperidinamine (CAS Reg. No. 152261-33-1). | BASF AG | As an ultraviolet light stabilizer at levels not exceeding 0.3 percent by weight in olefin polymers complying with 21 CFR 177.1520 Olefin polymers, or an effective food contact substance notification. | Limitations/ Specifi- cations |
March 22, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
BASF AG | ||||||||||||||||||||||||||||||||
481 | Tetrafluoroethylene-ethylene-3,3,4,4,5,5,6,6,6-nonafluoro-1-hexene terpolymer (CAS Reg. No. 68258-85-5). | Asahi Glass Company, Ltd. | The FCS will be used as a base resin or coating in repeat-use applications. | Limitations/ Specifi- cations |
May 10, 2005 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Asahi Glass Company, Ltd. | ||||||||||||||||||||||||||||||||
482 | Hydrogenated aromatic petroleum hydrocarbon resin (CAS Reg. No. 88526-47-0), which may be partially hydrogenated. | Eastman Chemical Company | As a component of pressure-sensitive adhesives used as the food-contact surface of labels and tapes as provided in 21 CFR 175.125 (Pressure-sensitive adhesives). | Limitations/ Specifi- cations |
April 5, 2005 | EA/FONSI | ||||||||||||||||||||||||||
Eastman Chemical Company | ||||||||||||||||||||||||||||||||
483 | Dimethyl dicarbonate (DMDC) | Lanxess Corporation | As a microbial control agent in carbonated beverages containing up to and including 100 percent juice and flavored water beverages (carbonated and non-carbonated) that contain low levels of juice or artificial or natural flavors. | Limitations/ Specifi- cations |
April 5, 2005 | CAT. EXCL. 21 CFR 25.32(k) |
||||||||||||||||||||||||||
Lanxess Corporation | ||||||||||||||||||||||||||||||||
484 | Isobutylene-butene copolymer (CAS Reg. No. 9044-17-1). | NOVA Chemicals Inc. | For use as a process aid in the manufacture of styrene-maleic anhydride copolymers complying with 21 CFR 177.1820(b)(2). | Limitations/ Specifi- cations |
April 6, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
NOVA Chemicals Inc. | ||||||||||||||||||||||||||||||||
485 | Polybetaine polysiloxane copolymer (CAS Reg. No. 102523-96-6). | Ecolab, Inc. | For use as a processing aid in rinse-aid products used in commercial dishwashing machines. | Limitations/ Specifi- cations |
April 21, 2005 | EA/FONSI | ||||||||||||||||||||||||||
Ecolab, Inc. | ||||||||||||||||||||||||||||||||
486 | Ethylene/propylene copolymers (CAS Reg. No. 9010-79-1) polymerized in the presence of propylene homopolymer (CAS Reg. No. 9003-07-0) complying with 21 CFR 177.1520(c) Item 1.1, to produce an inseparable blend of the two polymers. | Sunoco, Inc. | As the basic polymer used in the production of articles intended to contact food. | Limitations/ Specifi- cations |
April 15, 2005 | EA/FONSI | ||||||||||||||||||||||||||
Sunoco, Inc. | ||||||||||||||||||||||||||||||||
487 | 2-propen-1-ol, reaction products with pentafluoroiodoethane-tetrafluoroethylene telomer, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine (CAS Reg. No. 464178-90-3). | Hercules Incorporated | As an oil/grease resistant sizing agent for paper and paperboard employed either prior to the sheet forming operation or at the size press. | Limitations/ Specifi- cations |
July 14, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Hercules Incorporated | ||||||||||||||||||||||||||||||||
488 | 4-(4-phenoxyphenoxy) benzoic acid homopolymer (CAS Reg. No. 88049-74-5). | Solvay Advanced Polymers, LLC | For repeated use in contact with all types of food. | Limitations/ Specifi- cations |
May 6, 2005 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Solvay Advanced Polymers, LLC | ||||||||||||||||||||||||||||||||
489 | Tert-Butylperoxy-3,5,5-trimethylhexanoate (CAS Reg. No. 13122-18-4). | Akzo Nobel Polymer Chemicals LLC | As a processing aid in the production of vinyl acetate adhesives intended to be used to affix lables to the outside surface of food packaging. | Limitations/ Specifi- cations |
May 10, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Akzo Nobel Polymer Chemicals LLC | ||||||||||||||||||||||||||||||||
490 | 2-Propenoic acid, 2-methyl-, 2-ethyl-2-[{(2-methyl-1-oxo-2-propenyl) oxy} methyl]-1, 3-propenediyl ester, polymer with ethyl-2-propenoate and methyl 2-methyl-2-propenoate (CAS Reg. No. 59779-17-8). | Ganz Chemical Company, Ltd. | The FCS is intended for use as an antiblocking agent for linear low density polyethylene (LLDPE) films at a use level of 0.5 to 2 weight-percent (with a typical use level of 1 weight-percent). | Limitations/ Specifi- cations |
August 2, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Ganz Chemical Company, Ltd. | ||||||||||||||||||||||||||||||||
491 | Sodium sulfate salt of ethoxylated (7 moles of ethylene oxide) - and iso-undecyl alcohol (C11) (CAS Reg. No. 219756-63-5). | Clariant GmbH | For use as an emulsifier in the production of adhesives, pressure-sensitive adhesives, and in adhesives for laminate structures intended for use at temperatures of 250°F and above. | Limitations/ Specifi- cations |
May 31, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Clariant GmbH | ||||||||||||||||||||||||||||||||
493 | REPLACED BY FCN 537 | Limitations/ Specifi- cations |
||||||||||||||||||||||||||||||
494 | 2,4-di-tert-pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl) ethyl]phenyl acrylate (CAS Reg. No. 123968-25-2). | Sumitomo Chemical Company, Ltd. | The FCS will be used as a stabilizer in polystyrene(PS) and rubber-modified polystyrene(RMPS) complying with 21CFR 177.1640, styrene block copolymers(SB) complying with 21CFR 177.1810, and PS, RMPS, or SB complying with an effective FCN. | Limitations/ Specifi- cations |
July 27, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Sumitomo Chemical Company, Ltd. | ||||||||||||||||||||||||||||||||
495 | Sodium dichloroisocyanurate (CAS Reg. No. 2893-78-9) and sodium bromide mixture containing 85-94 weight-percent sodium dichloroisocyanurate, and 5-9 weight-percent sodium bromide. | Occidental Chemical Corporation | For use as a slimicide in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
June 18, 2005 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
Occidental Chemical Corporation | ||||||||||||||||||||||||||||||||
498 | Polyethylene terephthalate copolyesters (including isophthalic acid and/or diethylene glycol modified) that otherwise comply with 21 CFR 177.1630 or an applicable effective Food Contact Notification, containing up to 0.85 weight percent sodium dimethyl 5-sulfoisophthalate units. | INVISTA S.à r.l. | The FCS is intended for use as films or articles intended to contact food. | Limitations/ Specifi- cations |
June 24, 2005 | EA/FONSI | ||||||||||||||||||||||||||
INVISTA S.à r.l. | ||||||||||||||||||||||||||||||||
500 | 1,4-Cyclohexanedicarboxylic acid, polymer with 1,4-cyclohexanedimethanol, 2-(3-hydroxypropyl)-6-[(3-hydroxylpropyl)amino]-1H-benz[de]isoquinoline-1,3-(2H)-dione and 1,3-pentanediamine, 2-hydroxy-3-phenoxypropyl ester (CAS Reg. No. 519050-54-5). | Day-Glo Color Corporation | To be used as a colorant in polypropylene films and molded articles that may contact all food types under Conditions of Use E through G as defined in Table 2. | Limitations/ Specifi- cations |
July 1, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Day-Glo Color Corporation | ||||||||||||||||||||||||||||||||
501 | Hydrogenated polymers prepared from one or more of the following: 1-decene (CAS Reg. No. 872-05-9), 1-dodecene, (CAS Reg. No. 112-41-4), and 1-octene (CAS Reg.No.111-66-0). | ExxonMobil Chemical Company | As an additive at levels up to 25 percent by weight in pressure-sensitive adhesives that comply with 21 CFR 175.125 | Limitations/ Specifi- cations |
September 3, 2005 | EA/FONSI | ||||||||||||||||||||||||||
ExxonMobil Chemical Company | ||||||||||||||||||||||||||||||||
502 | Hexanedioic acid, polymer with hexahydro-2H-azepin-2-one and 1,6-hexanediamine (CAS Reg. No. 24993-04-2). | BASF Corporation | As a component of films used in contact with all food types under Conditions of Use A through H, as described in Tables 1 and 2, respectively. | Limitations/ Specifi- cations |
July 5, 2005 | EA/FONSI | ||||||||||||||||||||||||||
BASF AG / BASF Corporation | ||||||||||||||||||||||||||||||||
504 | 1,2-benzisothiazolin-3-one (CAS Reg. No. 2634-33-5). | Arch Chemicals, Inc. | The notifier intends to use the FCS as a wet state preservative (biocide) for styrene/acrylic or polymer lattices used in the manufacture of coatings (lacquer) which will be applied to the food contact side of single use articles made from aluminum foil for use with all food types under Conditions of Use B through H (see Table 2). | Limitations/ Specifi- cations |
July 2, 2005 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
Arch Chemicals, Inc. | ||||||||||||||||||||||||||||||||
505 | Benzamide, 3,3'-[(2-chloro-5-methyl-1,4-phenylene)bis[imino(1-acetyl-2-oxo-2,1-ethanediyl)azo]]bis[4-chloro-N-(3-chloro-2-methylphenyl)-(9Cl) (CAS Reg. No. 5580-57-4). | Ciba Specialty Chemicals Corporation | For use as a colorant for food-contact polymers. | Limitations/ Specifi- cations |
July 12, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
506 | Polyether sulfone-polyphenylene sulfone block copolymer CAS name: [1,1'-Biphenyl]-4,4'-diol, polymer with 1,1'-sulfonylbis[4-chlorobenzene] and 4,4'-sulfonylbis [phenol] (CAS Reg. No. 83094-08-0). | Solvay Advanced Polymers, LLC | As a component of repeat-use molded articles that may contact all types of food, including food trays, conveyor belts, bearings, utensils, containers, and components of machinery. | Limitations/ Specifi- cations |
July 15, 2005 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Solvay Advanced Polymers, LLC | ||||||||||||||||||||||||||||||||
507 | Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyoxyethylene mono-Me ether and polyoxypropylene mono-Me ether (CAS Reg. No. 472975-82-9). | Dow Corning Corporation | As a defoaming agent in the pulping of lignocellulosic materials that will be used in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
July 21, 2005 | EA/FONSI | ||||||||||||||||||||||||||
Dow Corning Corporation | ||||||||||||||||||||||||||||||||
508 | Alpha-sulfo-omega-(dodecyloxy)(polyoxyethylene) sodium, salt (CAS Reg. No. 9004-82-4). | The Dow Chemical Company | The FCS will be used as an emulsifier/surfactant in the production of styrene-butadiene-acrylonitrile copolymer coatings for paper and paperboard. | Limitations/ Specifi- cations |
July 27, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
The Dow Chemical Company | ||||||||||||||||||||||||||||||||
509 | Bis(p-ethylbenzylidene) sorbitol (CAS Reg. No. 79072-96-1). | Ampacet Corporation | For use as a clarifying agent in linear low and low density polyethylene (LLDPE and LDPE). | Limitations/ Specifi- cations |
July 27, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ampacet Corporation | ||||||||||||||||||||||||||||||||
510 | Copolymer of 1,1-difluoroethylene, hexafluoropropene, tetrafluoroethylene, and a halogenated alkene, optionally cured with triallyl isocyanurate and 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane. | DuPont Performance Elastomers L.L.C. | For repeat-use in the fabrication of molded parts such as o-rings and gaskets for food processing equipment. | Limitations/ Specifi- cations |
October 13, 2005 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
DuPont Performance Elastomers L.L.C. | ||||||||||||||||||||||||||||||||
511 | Copolymer of 1,1-difluoroethylene, tetrafluoroethylene, trifluoromethyl trifluorovinyl ether and a halogenated alkene, optionally cured with triallyl isocyanurate and 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane. | DuPont Performance Elastomers L.L.C. | For repeat-use in the fabrication of molded parts such as o-rings and gaskets for food processing equipment. | Limitations/ Specifi- cations |
October 13, 2005 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
DuPont Performance Elastomers L.L.C. | ||||||||||||||||||||||||||||||||
512 | Industrial starch modified (CAS Reg. No. 56780-58-6) by treatment with greater than 5 percent, and not more than 21 percent by weight 2,3-epoxypropyl trimethylammonium chloride (CAS Reg. No. 3033-77-0). | Penford Products Company | As a retention aid and/or drainage aid and/or dry-strength agent employed prior to the sheet forming operation in the manufacture of food-contact paper and paperboard at a maximum level of 1 percent by weight of the dry pulp. | Limitations/ Specifi- cations |
October 8, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Penford Products Company | ||||||||||||||||||||||||||||||||
513 | A mixture of 35-60 percent hydroxysulfinoacetic acid, disodium salt (CAS Reg. No. 223106-41-0), 10-60 percent hydroxysulfoacetic acid, disodium salt (CAS Reg. No. 29736-24-1), and 0-40 percent sodium sulfite (CAS Reg. No. 7757-83-7). | Brüggemann Chemical US, Inc. | As a reducing agent in emulsion polymerization redox catalyst systems, with the produced polymer emulsions to be used as components of food-contact paper and paperboard complying with 21 CFR 176.170 or 176.180, adhesives complying with 21 CFR 175.105, and repeat use rubber articles complying with 21 CFR 177.2600. | Limitations/ Specifi- cations |
October 1, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Brüggemann Chemical US, Inc. | ||||||||||||||||||||||||||||||||
514 | Lithium 12-hydroxystearate | Asahi Denka Co., Ltd. | As a stabilizing agent in polypropylene homo and copolymer. | Limitations/ Specifi- cations |
August 23, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Asahi Denka Co., Ltd. | ||||||||||||||||||||||||||||||||
515 | 12H-Dibenzo[d,g][1,3,2]dioxaphosphocin, 2,4,8,10-tetrakis(1,1-dimethylethyl)-6-hydroxy-,6-oxide, lithium salt (CAS Reg. No. 85209-93-4). | Asahi Denka, Company, Ltd. | For use as a clarifying and nucleating agent in polypropylene polymers and copolymers complying with 21 CFR 177.1520(c) items 1.1, 3.1, and 3.2. | Limitations/ Specifi- cations |
August 23, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Asahi Denka, Company, Ltd. | ||||||||||||||||||||||||||||||||
516 | Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyoxyethylene mono-Me ether and polyoxypropylene mono-Me ether (CAS Reg. No. 472975-82-9). | Dow Corning Corporation | As a defoaming agent in printing inks and ink coatings applied to both the food contact side and non-food contact side of paper, paperboard, films, and foils used in food packaging. | Limitations/ Specifi- cations |
October 13, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Dow Corning Corporation | ||||||||||||||||||||||||||||||||
517 | Polysulfone-polyphenylene sulfone block copolymer CAS name: [1,1'-Biphenyl]-4,4'-diol, polymer with 4,4'-(1-methylethylidene) bis[phenol] and 1,1'-sulfonylbis[4-chlorobenzene] (CAS Reg. No. 27757-21-7). | Solvay Advanced Polymers, LLC | As a component of repeat-use molded articles such as food trays, conveyor belts, bearings, utensils, containers, and components of machinery. | Limitations/ Specifi- cations |
August 31, 2005 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Solvay Advanced Polymers, LLC | ||||||||||||||||||||||||||||||||
518 | 2-propen-1-ol, reaction products with pentafluoroiodoethane-tetrafluoroethylene telomer, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine (CAS Reg. No 464178-90-3). | Hercules Inc. | As an oil/grease resistant sizing agent at levels up to 0.5 percent by weight employed either prior to the sheet forming operation or at the size press for paper and paperboard intended for use in microwave heat-susceptor packaging. | Limitations/ Specifi- cations |
October 20, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Hercules Inc. | ||||||||||||||||||||||||||||||||
519 | Phenol,4-(1,1-dimethylethyl)-, polymer with sulfur chloride (CAS Reg. No. 60303-68-6). | Arkema Inc. | As an antioxidant/stabilizer in the processing of rosins and rosin esters for use as components of adhesives complying with 21 CFR 175.105. | Limitations/ Specifi- cations |
September 1, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Arkema Inc. | ||||||||||||||||||||||||||||||||
522 | Styrene-1,3-butadiene block copolymer containing 60 - 75 weight - percent of polymer units derived from styrene (CAS Reg. No. 106107-54-4). | BASF Aktiengesellschaft | The FCS will be used in the manufacture of food-contact films and coatings. | Limitations/ Specifi- cations |
October 26, 2005 | EA/FONSI | ||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
524 | Tris (2,4-di-tert-butylphenyl) phosphite (CAS Reg. No. 31570-04-4). | Ciba Specialty Chemicals Corporation | As an antioxidant/stabilizer in styrene block copolymers complying with 21 CFR 177.1810 Styrene block polymers | Limitations/ Specifi- cations |
September 30, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
526 | 1,3-Benzenedicarboxylic acid, polymer with 1,3-benzenedimethanamine and hexanedioic acid (CAS Reg. No. 28628-75-3). REPLACES FCN #472 |
EMS-Chemie AG/EMS-Chemie (North America) Inc. | As a component of non-food-contact layers of multilayer films for packaging. | Limitations/ Specifi- cations |
October 5, 2005 | EA/FONSI | ||||||||||||||||||||||||||
EMS-Chemie AG/EMS-Chemie (North America) Inc. | ||||||||||||||||||||||||||||||||
527 | 1,3-Propanediol, 2-ethyl-2-(hydroxymethyl)(CAS Reg. No. 77-99-6). | Tioxide Group, Unlimited | As a dispersant for pigments. 1) At levels up to 0.6 percent by weight of the pigment when the pigment is used as a colorant for all types of polymers complying with 21 CFR 178.3297. 2) 2. At levels up to 1.0 percent by weight of the pigment when the pigment is used in inks that may come into contact with food. |
Limitations/ Specifi- cations |
October 20, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Tioxide Group, Unlimited | ||||||||||||||||||||||||||||||||
528 | Agarose, cross-linked with epichlorohydrin and derivatized with 1,4-butane sultone, supported on tungsten carbide beads. | UpFront Chromatography A/S | As an ion exchange resin for adsorption of proteins from skim milk and whey. | Limitations/ Specifi- cations |
November 15, 2005 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
UpFront Chromatography A/S | ||||||||||||||||||||||||||||||||
529 | Phosphorous acid, cyclic neopentanetetrayl-bis(2,4-di-tert-butylphenyl)ester (CAS Reg. No. 26741-53-7) containing not more than 1 percent by weight triisopropanolamine (CAS Reg. No. 122-20-3). | SABIC Innovative Plastics | The subject FCS is intended for use as an antioxidant/stabilizer in acrylonitrile/butadiene/styrene (ABS) polymers and methyl methacrylate-modified ABS (MABS) polymers. | Limitations/ Specifi- cations |
October 19, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
531 | Agarose, polymer with (chloromethyl)oxirane, 2-hydroxy-3-(2-hydroxy-3-(trimethylammonio)propoxy)propyl ethers, sulfate salts (CAS Reg. No. 846053-13-2). | GE Healthcare | As an ion exchange resin. | Limitations/ Specifi- cations |
October 26, 2005 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
GE Healthcare | ||||||||||||||||||||||||||||||||
532 | 2,2'-methylenebis(6-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyl)phenol) (CAS Reg. No. 103597-45-1). | Asahi Denka Company, Ltd. | As an ultraviolet light absorber in polycarbonate food-contact articles complying with Title 21 CFR 177.1580 Polycarbonate resins. | Limitations/ Specifi- cations |
October 28, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Asahi Denka Company, Ltd. | ||||||||||||||||||||||||||||||||
533 | Hydrogenated polymers prepared from one or more of the following monomers: 1-decene (CAS Reg. No. 872-05-9), 1-dodecene (CAS Reg. No. 112-41-4), and 1-octene (CAS Reg.No.111-66-0). | ExxonMobil Chemical Company | As an additive at levels up to 10 percent in propylene homopolymers and copolymers that comply with 21 CFR 177.1520(c) or are the subject of an effective food contact notification. | Limitations/ Specifi- cations |
November 3, 2005 | EA/FONSI | ||||||||||||||||||||||||||
ExxonMobil Chemical Company | ||||||||||||||||||||||||||||||||
534 | Dicetyl peroxydicarbonate (CAS Reg. No. 26322-14-5) | Akzo Nobel Polymer Chemicals LLC | The FCS will be used as a modifier in the production of high melt strength polypropylene (HMS-PP). The primary applications for the HMS-PP are in foaming, thermoforming and blow molding. The HMS-PP will comply with 21 CFR 177.1520. | Limitations/ Specifi- cations |
November 5, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Akzo Nobel Polymer Chemicals LLC | ||||||||||||||||||||||||||||||||
535 | A type of zeolite in which silver, copper and ammonium ions have been exchanged for sodium ions. | AgIon Technologies | To control microorganisms that may grow on the article and to thereby preserve the article. | Limitations/ Specifi- cations |
November 11, 2005 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
AgIon Technologies | ||||||||||||||||||||||||||||||||
537 | 2,2'-(1,4-Phenylene)bis[4H-3,1-benzoxazin-4-one] (CAS Reg. No. 18600-59-4). REPLACES FCNs 428 and 493 |
Cytec Industries Incorporation | To be used as an ultraviolet (UV) light stabilizer in ethylene phthalate (PET) polymers complying with 21 CFR 177.1630 (Polyethylene phthalate polymers), 21 CFR 177.1315 (Ethylene-1,4-cyclohexylene dimethylene terephthalate copolymers), or that are the subject of an effective FCN. | Limitations/ Specifi- cations |
November 17, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Cytec Industries Incorporation | ||||||||||||||||||||||||||||||||
538 | Perfluoropolyether dicarboxylic acid (CAS Reg. No. 69991-62-4), ammonium salt. | Solvay Solexis S.p.A | As an oil and water repellent employed in the manufacture of food-contact paper and paperboard either prior to the sheet-forming operation or at the size press. | Limitations/ Specifi- cations |
November 19, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Solvay Solexis S.p.A | ||||||||||||||||||||||||||||||||
539 | A copolymer of 4-bromo-3,3,4,4-tetrafluoro-1-butene, ethylene, tetrafluoroethylene and trifluoromethyl trifluorovinyl ether optionally cured with triallyl isocyanurate and 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane. (CAS Reg. No. 105656-63-1) | DuPont Performance Elastomers LLC | For repeat-use in the fabrication of molded parts such as o-rings and gaskets for food processing equipment. | Limitations/ Specifi- cations |
November 22, 2005 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
DuPont Performance Elastomers LLC | ||||||||||||||||||||||||||||||||
540 | 3-Chloro-2-hydroxypropyltrimethylammonium chloride (CAS Reg. No. 3327-22-8). | Grain Processing Corporation | For use as a starting material in the production of 2,3-epoxypropyltrimethylammonium chloride (CAS Reg. No. 3033-77-0) that will be used to modify industrial starch at a treatment level of greater than 5 percent and not more than 21 percent by weight of the starch to form high cationic starch (HCS). The finished HCS is intended for use as a retention aid and/or drainage aid and/or dry-strength agent employed prior to the sheet forming operation in the manufacture of only recycled food-contact paperboard. | Limitations/ Specifi- cations |
November 13, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Grain Processing Corporation | ||||||||||||||||||||||||||||||||
541 | Poly[[6-[(1,1,3,3- tetramethybutyl) amino]-s- triazine-2,4-diyl][2,2,6,6- tetramethyl-4- piperidyl)imino]hexamethylene[( 2,2,6,6-tetramethyl-4- piperidyl)imino]] (CAS Reg. No. 70624 18-9) | Ciba Specialty Chemicals Corporation | As an antioxidant/stabilizer for use in polyethylene polymers identified in 21 CFR 177.1520(c), items 2.1, 2.2, and 2.3, having a density greater than or equal to 0.94 grams per cubic centimeter. | Limitations/ Specifi- cations |
November 24, 2005 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
542 | 2-propen-1-ol, reaction products with 1,1,1,2,2,3,3,4,4,5,5,6,6-tridecafluoro-6-iodohexane, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine (CAS Reg. No. 464178-94-7). | Hercules Incorporated | As an oil/grease resistant sizing agent employed prior to the sheet forming operation in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
November 25, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Hercules Incorporated | ||||||||||||||||||||||||||||||||
544 | 5,7-Bis(1,1-dimethylethyl)-3-hydroxy-2(3H)-benzofuranone, reaction products with o-xylene (CAS Reg. No. 181314-48-7). | Ciba Specialty Chemicals Corporation | As an antioxidant and/or stabilizer in polystyrene and impact polystyrene, compliant with 21 CFR 177.1640, in contact with all food types. | Limitations/ Specifi- cations |
February 16, 2006 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
545 | Styrene (CAS Reg. No. 100-42-5), methyl methacrylate (CAS Reg. No. 80-62-6) and glycidyl methacrylate (CAS Reg. No. 1-6-91-2) copolymers. | BASF Corporation and Nature Works LLC |
The FCS will be used as a polymeric chain extender in the manufacture of polylactide polymers in contact with all food types (except in foods with an alcohol content greater than 15 percent) and under Conditions of Use E through G. | Limitations/ Specifi- cations |
February 3, 2006 | EA/FONSI | ||||||||||||||||||||||||||
BASF Corporation and Nature Works LLC |
||||||||||||||||||||||||||||||||
546 | 1,3-Benzenedicarboxylic acid, 5-sulfo-, monolithium salt (CAS Reg. No. 46728-75-0). | Gruppo Mossi & Ghisolfi M&G Polymers USA LLC |
The FCS is intended for use as a modifier of ethylene phthalate polymers regulated under 21 CFR 177.1630 and ethylene phthalate polymers that are the subject of an effective FCN. | Limitations/ Specifi- cations |
January 28, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Gruppo Mossi & Ghisolfi M&G Polymers USA LLC |
||||||||||||||||||||||||||||||||
547 | Polyethylene terephthalate copolyesters (diethylene glycol-isophthalate modified) prepared by the condensation of dimethyl terephthalate or terephthalic acid and ethylene glycol with one or more of the following: dimethyl isophthalate, isophthalic acid, and diethylene glycol. The finished polymer shall contain a total of up to 16 mole-percent of total diethylene glycol and isophthalate units, with the diethylene glycol content expressed as a mole-percent of the total glycol units and the isophthalate content expressed as a mole-percent of the total isophthalate/terephthalate units. | Futura Polymers A division of Futura Polyesters Limited |
For finished polymers containing up to 12 mole-percent of total diethylene glycol and isophthalate units, for use as films or articles intended for contact with aqueous, acidic, low-alcohol (up to 50 percent alcohol by volume), dry and fatty foods under Conditions of Use A through H as described in Table 2, and for use in contact with high-alcohol foods (greater than 50 percent alcohol by volume) under Conditions of Use E through G as described in Table 2. For finished polymers containing between 12 and 16 mole-percent total diethylene glycol and isophthalate units, for use as films or articles intended for contact with aqueous, acidic, low-alcohol (up to 50 percent alcohol by volume), dry, and fatty foods under Conditions of Use B through H as described in Table 2. | Limitations/ Specifi- cations |
January 26, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Futura Polymers A division of Futura Polyesters Limited |
||||||||||||||||||||||||||||||||
548 | REPLACED BY FCN 614 | Limitations/ Specifi- cations |
||||||||||||||||||||||||||||||
549 | Silicon Dioxide (CAS Reg. No. 7631-86-9), with a topcoat of a polymer of hexamethyldisiloxane (CAS Reg. No. 26298-61-3). | Toyo Seikan Kaisha, Ltd. | To be used as an amorphous plasma-deposited silicon barrier coating on the food-contact surface of PET food packaging articles. | Limitations/ Specifi- cations |
December 21, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Toyo Seikan Kaisha, Ltd. | ||||||||||||||||||||||||||||||||
550 | Copper, [C,C,C,C-tetrachloro-29H, 31H-phthalocyaninato(2-)-N29, N30, N31,N32] (CAS Reg. No. 27614-71-7). | BASF Corporation | As a colorant in all types of food-contact polymers. | Limitations/ Specifi- cations |
March 7, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
551 | Trimethylolpropane (CAS Reg. No. 77-99-6). | E.I. du Pont de Nemours and Company, Incorporated | As a milling aid and dispersant for pigments used as components of food-contact articles. | Limitations/ Specifi- cations |
December 30, 2005 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
E.I. du Pont de Nemours and Company, Incorporated | ||||||||||||||||||||||||||||||||
553 | Ethanedioic acid, diethyl ester, polymer with 2,3-dihydro-9,10-dihydroxy-1,4-anthracenedione, 1,4-dihydroxy-9,10 anthracenedione and 1,3-pentanediamine (CAS Reg. No. 725685-53-0). | Day-Glo Color Corporation | As a colorant in polypropylene food-contact polymers. | Limitations/ Specifi- cations |
March 18, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Day-Glo Color Corporation | ||||||||||||||||||||||||||||||||
554 | 2-Propenoic acid, homopolymer, sodium salt (with a weight average molecular weight of 2300 to 5700 Daltons and a weight average molecular weight to number average molecular weight ratio of not more than 6.3) (CAS Reg. No. 9003-04-7). | Ciba Specialty Chemicals Corporation | To control the formation of mineral scale during evaporation of beet or cane sugar juice. | Limitations/ Specifi- cations |
April 13, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
555 | 2-Hydroxyethyl methacrylate (CAS Reg. No. 868-77-9). | PPG Industries (UK) | As a monomeric component of acrylic polymers complying with 21 CFR 177.1010, used only in the manufacture of resinous and polymeric coatings. | Limitations/ Specifi- cations |
January 28, 2006 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
PPG Industries (UK) | ||||||||||||||||||||||||||||||||
556 | Phosphonic acid, [[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]methyl]-, diethyl ester (CAS Reg. No. 976-56-7). | Ciba Specialty Chemicals Corporation | The FCS is intended for use as an antioxidant/stabilizer in (a) ethylene phthalate polymers compliant with 21 CFR 177.1630 and (b) ethylene phthalate polymers compliant with the specifications in 21 CFR 177.1630(f) for which there is an effective food contact notification. | Limitations/ Specifi- cations |
April 19, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
558 | 1,4-Benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, hexamethylene diisocyanate and not more than 1 percent by weight of a polyhydric alcohol, as described in FCN 372. | Stanelco Plc | For use in blends with food-contact polylactide polymers used to produce single use food-contact trays. | Limitations/ Specifi- cations |
February 10, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Stanelco Plc | ||||||||||||||||||||||||||||||||
560 | p-chloro-m-cresol (CAS Reg. No. 59-50-7). | LANXESS Corporation | For use as an antimicrobial preservative in lubricants with incidental food contact. | Limitations/ Specifi- cations |
February 15, 2006 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
LANXESS Corporation | ||||||||||||||||||||||||||||||||
561 | A mixture containing peroxyacetic acid (CAS Reg. No. 79-21-0), hydrogen peroxide (CAS Reg. No. 7722-84-l), acetic acid (CAS Reg. No. 64-19-7), l-hydroxyethylidene-1,l-diphosphonic acid (HEDP) (CAS Reg. No. 2809-21-4), and water. | FMC Corporation | The FCS will be used as a part of the process to treat food-contact surfaces to attain commercial sterility at least equivalent to that attainable by thermal processing for metal containers as provided for in 21 CFR Part 113. | Limitations/ Specifi- cations |
February 22, 2006 | EA/FONSI | ||||||||||||||||||||||||||
FMC Corporation | ||||||||||||||||||||||||||||||||
563 | Dimethyl sulfoisophthalate, sodium salt (DMSIP) (CAS Reg. No. 3965-55-7). [The CAS nomenclature is 1,3-Benzenedicarboxylic acid, 5-sulfo-, 1,3-dimethyl ester, sodium salt.] | Wellman Incorporated | For use as a modifier in polyethylene terephthalate (PET). | Limitations/ Specifi- cations |
April 28, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Wellman Incorporated | ||||||||||||||||||||||||||||||||
564 | Copolymer of divinylbenzene and ethylvinylbenzene (CAS Reg. No. 9043-77-0). | Rohm and Haas Company | The FCS is used to remove organic substances from all alcoholic beverages, food types VIA and VIC as described in Table 1. | Limitations/ Specifi- cations |
March 7, 2006 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Rohm and Haas Company | ||||||||||||||||||||||||||||||||
566 | Poly(N-vinylformamide), 20-100 percent hydrolyzed, chloride or sulfate salts. The FCS is specifically known as one of the following: 1. formamide, N-ethenyl-, polymer with ethanamine, hydrochloride (CAS Reg. No. 111616-55-8) 2. formamide, N-ethenyl-, polymer with ethanamine sulfate (CAS Reg. No. 117985-59-8) 3. formamide, ethenyl-, homopolymer, hydrolyzed, hydrochlorides, (CAS Reg. No. 183815-54-5). |
Hercules Incorporated | As strengthening agents, fixing agents, or retention aids prior to the sheet-forming operation in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
March 15, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Hercules Incorporated | ||||||||||||||||||||||||||||||||
567 | Bromine chloride (BrCl) (CAS Reg. No. 13863-41-7). | Albemarle Corporation | The FCS is intended for use as a slimicide in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
April 28, 2006 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
Albemarle Corporation | ||||||||||||||||||||||||||||||||
569 | A mixture of 5-chloro-2-methyl-4-isothiazolin-3-one (CAS Reg. No. 26172-55-4) and 2-methyl-4-isothiazolin-3-one (CAS Reg. No. 2682-20-4) at a ratio of 3 parts to 1 part by weight. The mixture may contain magnesium or sodium nitrate at a 1 to 1 ratio (weight/weight) with the sum of the isothiazolinone ingredients. | Thor GmbH | As an antimicrobial agent in polymer latex solutions intended for use in adhesives complying with 21 CFR 175.105. | Limitations/ Specifi- cations |
March 21, 2006 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
Thor GmbH | ||||||||||||||||||||||||||||||||
571 | Extruded polystyrene (CAS Reg. No. 9003-53-6) and cross-linked polyvinylpyrrolidone (CAS Reg. No. 9003-39-8). | BASF Aktiengesellschaft | As a repeat-use clarifying agent during the manufacture of alcoholic and non-alcoholic beverages. | Limitations/ Specifi- cations |
May 12, 2006 | EA/FONSI | ||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
572 | Amines, bis(hydrogenated rape oil alkyl) methyl, N-oxides (CAS Reg. No. 204933-93-7). | Chemtura Corporation | As an antioxidant in the manufacture of polyethylene and polypropylene homopolymer and copolymers complying with 21 CFR 177.1520(c). | Limitations/ Specifi- cations |
March 28, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Chemtura Corporation | ||||||||||||||||||||||||||||||||
573 | Copolymer of tetrafluoroethylene, perfluoromethylvinylether and 1-iodo-2- bromo- tetrafluoroethane intended to be cross-linked with triallylisocyanurate. REPLACES FCN #278 |
Unimatec Company, Ltd. | As an O-ring or gasket in food-processing machinery. | Limitations/ Specifi- cations |
March 30, 2006 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Unimatec Company, Ltd. | ||||||||||||||||||||||||||||||||
574 | Polyglycolic acid (CAS Reg. No. 26124-68-5). | Kureha Corporation | As the non food-contact layer of multi-layer, polyethylene terephthalate (PET) beverage bottles. | Limitations/ Specifi- cations |
April 14, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Kureha Corporation | ||||||||||||||||||||||||||||||||
575
|
Silicon nitride containing up to 14.5 percent aluminum oxide, yttrium oxide, and/or titanium dioxide. | CERATIZIT Austria Gesellschaft m.b.H. | The food contact substances will be used in the manufacture of food processing equipment (e.g. seal rings, bearings, parts in conveying systems, and parts in crushers and mills). | Limitations/ Specifi- cations |
March 31, 2006 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
CERATIZIT S.A. and subsidiaries | ||||||||||||||||||||||||||||||||
578
|
Tungsten carbide containing up to 16.0 percent cobalt with up to 6.5 percent chromium, titanium carbide, tantalum carbide, niobium carbide, and/or vanadium carbide. | CERATIZIT Austria Gesellschaft m.b.H. | The food contact substances will be used in the manufacture of food processing equipment (e.g. seal rings, bearings, parts in conveying systems, and parts in crushers and mills). | Limitations/ Specifi- cations |
March 31, 2006 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
CERATIZIT S.A. and subsidiaries | ||||||||||||||||||||||||||||||||
586
|
Tungsten carbide containing up to 11.5 percent nickel with up to 1.9 percent chronium, tantalum carbide, niobium carbide, molybdenum carbide, and/or vanadium carbide. | CERATIZIT Austria Gesellschaft m.b.H. | The food contact substances will be used in the manufacture of food processing equipment (e.g. seal rings, bearings, parts in conveying systems, and parts in crushers and mills). | Limitations/ Specifi- cations |
March 31, 2006 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
CERATIZIT S.A. and subsidiaries | ||||||||||||||||||||||||||||||||
592 | Cross-linked reaction product of polyvinyl alcohol (PVOH) (CAS Reg. No. 9002-89-5) and tetraethoxysilane (TEOS) (CAS Reg. No. 78-10-4), coupled with the trimethoxysilane-based coupling agent described in the notification. | Toppan Printing Company, Ltd. | 1. As a non-food-contact layer in multilayer constructions intended for use in packaging food of all types under Conditions of Use B through H as specified in Table 2, and at higher temperatures only in retort packaging processes. 2. When used under Condition of Use B through H, the food-contact substance layer will be separated from food by at least a 20 micron thick layer of low density polyethylene or other polymer layer sufficiently thick so as to provide equivalent or better barrier properties than 20 microns of low density polyethylene. 3. When used in retort packaging processes, the food-contact substance layer will be separated from food by at least a 50 micron thick layer of polypropylene or other polymer layer sufficiently thick so as to provide equivalent or better barrier properties than 50 microns of polypropylene. |
Limitations/ Specifi- cations |
March 31, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Toppan Printing Company, Ltd. | ||||||||||||||||||||||||||||||||
594 | Copolymer of styrene (CAS Reg. No. 100-42-5), methyl methacrylate (CAS Reg. No.80-62-6), and glycidyl methacrylate (CAS Reg. No. 106-91-2). | BASF Corporation and NatureWorks LLC |
For use as a polymeric chain extender in foamed polylactide polymers. | Limitations/ Specifi- cations |
April 18, 2006 | EA/FONSI | ||||||||||||||||||||||||||
BASF Corporation and NatureWorks LLC |
||||||||||||||||||||||||||||||||
595 | Industrial starch modified (CAS Reg. No. 56780-58-6) by treatment with greater than 5 percent, and not more than 21 percent by weight 2,3-epoxypropyl trimethylammonium chloride (CAS Reg. No. 3033-77-0). | Penford Corporation (USA); Penford Products Company; Penford Holdings Pty Ltd.; Penford Australia Ltd.; and Penford New Zealand Ltd. | As a retention aid and/or drainage aid and/or dry-strength agent employed prior to the sheet forming operation in the manufacture of food-contact paper and paperboard at a maximum level of 1 percent by weight of the dry pulp. | Limitations/ Specifi- cations |
April 26, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Penford Products Company; Penford Australia Ltd.; and Penford New Zealand Ltd. | ||||||||||||||||||||||||||||||||
597 | 2,2,4-Trimethyl-1,3-pentanediol diisobutyrate (CAS Reg. No. 6846-50-0). | Eastman Chemical Company | As a plasticizer for repeat-use vinyl chloride polymers that may contact food, including vinyl chloride polymer-based gloves used in processing food and as a component of coatings for paper and paperboard intended to contact dry food. | Limitations/ Specifi- cations |
April 29, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Eastman Chemical Company | ||||||||||||||||||||||||||||||||
598 | A copolymer of propylene (CAS Reg. No. 115-07-1), tetrafluoroethylene (CAS Reg. No. 116-14-3), and 3,3,3-trifluoropropene (CAS Reg. No. 677-21-4) cured with a salt of a quarternary ammonium compound and phenol, 4,4'-(2,2,2-trifluoro-1-(trifluoromethyl)ethylidene)bis-. | DuPont Performance Elastomers L.L.C. | For repeat use in the fabrication of molded parts such as o-rings and gaskets for food. | Limitations/ Specifi- cations |
April 29, 2006 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
DuPont Performance Elastomers L.L.C. | ||||||||||||||||||||||||||||||||
599 | Copolymer of polyfluorooctyl methacrylate, 2-N,N-diethylaminoethylmethacrylate, 2-hydroxyethylmethacrylate, and 2,2'-ethylenedioxydiethyldimethacrylate (CAS Reg. No. 863408-19-9). | AGC Chemicals Americas, Incorporated | As an oil, grease, and water resistant treatment for paper and paperboard employed either prior to the sheet forming operation or at the size press. | Limitations/ Specifi- cations |
June 29, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Asahi Glass Co., Ltd. (Manufacturer) and AGC Chemicals Americas, Incorporated |
||||||||||||||||||||||||||||||||
602 | 3-pyridinecarbonitrile, 4-methyl-2,6-bis[(4-methylphenyl)amino]-5-[[2-(trifluoromethyl)- phenyl]azo]- (CAS Reg. No. 669005-94-1). | Ciba Specialty Chemicals Corporation | The FCS is intended as a colorant for use in authorized poly(ethylene phthalate) polymers, including those modified with 1,4-cyclohexanedimethanol. | Limitations/ Specifi- cations |
July 5, 2006 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
604 | Copolymer of polyfluorooctyl methacrylate, 2-N,N-diethylaminoethylmethacrylate, 2-hydroxyethylmethacrylate, and 2,2'-ethylenedioxydiethyldimethacrylate (CAS Reg. No. 863408-19-9). | AGC Chemicals Americas, Incorporated | As an oil, grease, and water resistant treatment for paper and paperboard employed either prior to the sheet forming operation or at the size press. | Limitations/ Specifi- cations |
August 5, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Asahi Glass Company, Ltd. (Manufacturer) AGC Chemicals Americas, Incorporated |
||||||||||||||||||||||||||||||||
607 | Benzenesulfonic acid, 4-[[1-[[(2-methylphenyl)amino)]carbonyl]-2-oxopropyl]azo]-3-nitro-, calcium salt (2:1). (C.I. Pigment Yellow 62). | Dominion Colour Corporation | As a colorant for all polymers. | Limitations/ Specifi- cations |
May 30, 2006 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Dominion Colour Corporation | ||||||||||||||||||||||||||||||||
608 | 1,2-Cyclohexanedicarboxylic acid, calcium salt (1:1), (1R, 2S)-rel- (CAS Reg. No. 491589-22-1) | Milliken Chemical | As a nucleating or clarifying agent in all polyolefins. | Limitations/ Specifi- cations |
June 6, 2006 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Milliken Chemical | ||||||||||||||||||||||||||||||||
614 | Zeolite Na-P REPLACES FCN #548 |
Ineos Silicas Group | As a component for use in paper and paperboard coatings and as a filler. | Limitations/ Specifi- cations |
June 14, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Ineos Silicas Group | ||||||||||||||||||||||||||||||||
615 | N-[3,5-Bis-(2,2-dimethyl-propionylamino)-phenyl]-2,2-dimethyl-propionamide | Ciba Specialty Chemicals Corporation | For use as a clarifier for polypropylene (PP) homo- and copolymers. | Limitations/ Specifi- cations |
August 4, 2006 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
616 | Poly(1,4-benzene dicarboxylic acid dimethyl ester, 1,3-benzene dicarboxylic acid dimethyl ester, 1,4-butanediol, ethylene oxide, propylene oxide) (CAS Reg. No. 64811-38-7). | E. I. du Pont de Nemours and Company, Incorporated | The FCS is intended for use as a component of food contact articles in contact with all food types under Conditions of Use A through H, as described in Tables 1 and 2. | Limitations/ Specifi- cations |
June 28, 2006 | EA/FONSI | ||||||||||||||||||||||||||
E. I. du Pont de Nemours and Company, Incorporated | ||||||||||||||||||||||||||||||||
617 | Poly(1,4-benzene dicarboxylic acid dimethyl ester, 1,4-butanediol, ethylene oxide, propylene oxide) (CAS Reg. No. 64811-37-6). | E. I. du Pont de Nemours and Company, Incorporated | The FCS is intended for use as a component of food contact articles in contact with all food types under Conditions of Use A through H, as described in Tables 1 and 2. | Limitations/ Specifi- cations |
June 28, 2006 | EA/FONSI | ||||||||||||||||||||||||||
E. I. du Pont de Nemours and Company, Incorporated | ||||||||||||||||||||||||||||||||
618 | Fatty acids, C14-20, esters with pentaerythritol (CAS Reg. No. 68440-28-8). | Cognis Deutschland GmbH and Company, KG | As a processing agent in the production of polyethylene terephthalate (PET) food-contact materials. | Limitations/ Specifi- cations |
August 26, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Cognis Deutschland GmbH and Company, KG | ||||||||||||||||||||||||||||||||
619 | Platinum, [(2,5,6-.eta.)-3-(1-acetyl-2-oxopropyl)bicyclo[2.2.1]hept-5-en-2-yl](2,4-pentanedionato-O,O'). | Wacker Chemical Corporation | For use as a catalyst in the crosslinking reaction of vinyl functional polysiloxanes with hydrogen functional polysiloxanes to form silicone elastomers complying with 21 CFR 177.2600(c)(4)(i) for repeated use food contact articles. | Limitations/ Specifi- cations |
September 12, 2006 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Wacker Chemical Corporation | ||||||||||||||||||||||||||||||||
621 | Poly(1,4-phenylenecarbonyl-1,4-phenyleneoxy (CAS Reg. No. 27380-27-4). | ICI Measurement Science Group | As a component of repeat-use articles intended to contact all food types at all temperatures up to and including oven cooking temperatures. | Limitations/ Specifi- cations |
July 7, 2006 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Victrex plc | ||||||||||||||||||||||||||||||||
624 | Poly[(bis(isoindol-2-yl-1,3-dione)-1,3-phenylene)-4,4'-(l-methylethylidene)bisphenol]. | SABIC Innovative Plastics | As a component of food contact articles. | Limitations/ Specifi- cations |
September 16, 2006 | EA/FONSI | ||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
625 | A mixture of peroxyacetic acid, hydrogen peroxide, and 1-hydroxyethylidine-1,1-diphosphonic acid, with or without an optional adjuvant system composed of a mixture dimethyl sebacate (up to 20 percent), dimethyl succinate (up to 0.8 percent), dimethyl adipate (68-76 percent) and dimethyl glutarate (4- 12 percent). | Ecolab, Incorporated | As an antimicrobial additive that may be used alone or in combination with other processes in the commercial sterilization of polyethylene terephthalate (PET) food packaging prior to filling. | Limitations/ Specifi- cations |
September 24, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Ecolab, Incorporated | ||||||||||||||||||||||||||||||||
626 | Trilauryl phosphite (CAS Reg No. 3076-63-9). | Dover Chemical Corporation | As an antioxidant in vinyl chloride polymers and linear low density polyethylene. | Limitations/ Specifi- cations |
August 3, 2006 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Dover Chemical Corporation | ||||||||||||||||||||||||||||||||
627 | A copolymer of styrene and butadiene having a styrene monomer unit content of 60 percent - 74 percent. | Chevron Phillips Chemical Company LP | As a component in the manufacture of articles intended to contact food. | Limitations/ Specifi- cations |
August 12, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Chevron Phillips Chemical Company LP | ||||||||||||||||||||||||||||||||
628 | Copolymer of 2-perfluoroalkylethyl acrylate, 2-(dimethylamino)ethyl methacrylate, and oxidized 2-(dimethylamino)ethyl methacrylate (CAS Reg. No. 479029-28-2). | Clariant Corporation | For use as an oil and grease repellent in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
October 10, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Clariant Corporation | ||||||||||||||||||||||||||||||||
629 | Silane, dichlorodimethyl-, reaction products with silica (CAS Reg. No. 68611-44-9). | Milliken Chemical | As a flow agent for sorbitol acetal clarifying agents complying with 21 CFR 178.3295 Clarifying agents for polymers, or an effective food-contact notification. The FCS will be used at levels not to exceed 200 parts per million in polypropylene homopolymers and copolymers complying with 21 CFR 177.1520 Olefin polymers. | Limitations/ Specifi- cations |
August 16, 2006 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Milliken Chemical | ||||||||||||||||||||||||||||||||
630 | Methyl formate (CAS Reg. No. 107-31-3). | Pactiv Corporation | For use as a blowing agent for polystyrene food-contact articles. | Limitations/ Specifi- cations |
August 22, 2006 | CAT. EXCL. 21 CFR 25.32(r) |
||||||||||||||||||||||||||
Pactiv Corporation | ||||||||||||||||||||||||||||||||
631 | 2,5-Furandione, polymer with 1-propene (CAS Reg. No. 25722-45-6). | Mitsui Chemicals, Incorporated | As a component in blends with polypropylene (homopolymers and copolymers) for use in contact with food. | Limitations/ Specifi- cations |
August 24, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Mitsui Chemicals, Incorporated | ||||||||||||||||||||||||||||||||
632 | Magnesium(2+) 12-hydroxyoctadecanoate (CAS Reg. No. 91697-37-9). | Katsuta Kako K.K. | As a processing aid during extrusion and molding of polymer articles in contact with food. | Limitations/ Specifi- cations |
August 25, 2006 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Katsuta Kako K.K. | ||||||||||||||||||||||||||||||||
633 | Aluminum hydroxide magnesium hydroxide carbonate (Hydrotalcite) (CAS Reg. No. 12304-65-3). | Eka Chemicals Incorporated | The FCS will be used as a processing aid in the manufacture of paper and paperboard intended to contact food. | Limitations/ Specifi- cations |
August 30, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Eka Chemicals Incorporated | ||||||||||||||||||||||||||||||||
634 | Benzoic acid, 2-hydroxy, monosodium salt (CAS Reg. No. 54-21-7). | FMC Corporation | As a component of an adjuvant solution mixed with a peroxyacetic acid solution intended for use in sterilizing polymeric food-contact packaging. | Limitations/ Specifi- cations |
October 7, 2006 | EA/FONSI | ||||||||||||||||||||||||||
FMC Corporation | ||||||||||||||||||||||||||||||||
635 | Polyethylene terephthalate copolyesters (diethylene glycol-isophthalate modified) prepared by the condensation of dimethyl terephthalate or terephthalic acid with ethylene glycol and with one or more of the following: dimethyl isophthalate, isophthalic acid, and diethylene glycol. The finished polymer shall contain a total of not more than 10 mole-percent of diethylene glycol and isophthalate units, with the diethylene glycol content expressed as a mole-percent of the total glycol units and the isophthalate content expressed as a mole-percent of the total isophthalate/terephthalate units. | DAK Americas, LLC | For use as films or articles intended for contact with aqueous, acidic, low-alcohol (up to 15 percent alcohol), and fatty foods under Conditions of Use A through H as described in Table 2, and for use in contact with high-alcohol foods under Conditions of Use E through G as described in Table 2. | Limitations/ Specifi- cations |
August 30, 2006 | EA/FONSI | ||||||||||||||||||||||||||
DAK Americas, LLC | ||||||||||||||||||||||||||||||||
636 | Benzenesulfonic acid,2,2'-(1,2-ethenediyl)bis (5-((4-(bis(2 hydroxyethyl)amino)-6-((4-sulfophenyl)amino)-1,3,5-triazin-2-yl)amino)-, tetrasodium salt (CAS Reg. No. 16470-24-9). | Igcar Productos Quimicos S.L. | For use as an optical brightener in paper and paperboard. | Limitations/ Specifi- cations |
September 6, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Igcar Productos Quimicos S.L. | ||||||||||||||||||||||||||||||||
637 | Copolymer of 2,6-xylenol and 2,3,6-trimethylphenol(CAS Reg. No. 58295-79-7). | SABIC Innovative Plastics | As a component in the manufacture of articles intended to contact food. | Limitations/ Specifi- cations |
September 8, 2006 | EA/FONSI | ||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
638 | Benzoic acid, 2,2'-[(benzoylimino)bis [2,1-ethanediyl (5-cyano-2-hydroxy-4-methyl-6-oxo-1,3(6H)-pyridinediyl)azo]] bis-, diethyl ester (9CI) (CAS Reg. No. 459856-74-7). | Ciba Specialty Chemicals Corporation | As a colorant for use in authorized poly(ethylene phthalate) polymers, including those modified with 1,4-cyclohexanedimethanol. | Limitations/ Specifi- cations |
October 21, 2006 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
639 | 2,4-bis[(dodecylthio)methyl]-6-methylphenol (CAS Reg. No. 110675-26-8). | Ciba Specialty Chemicals Corporation | As an antioxidant/stabilizer for use in (1) styrene block polymers, and (2) polystyrene and rubber-modified polystyrene. | Limitations/ Specifi- cations |
September 19, 2006 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
641 | A mixture of peroxyacetic acid, hydrogen peroxide, and 1-hydroxyethylidine-1,1-diphosphonic acid. | Enviro Tech Chemical Services, Incorporated | As an antimicrobial to control microorganisms in wash water used to manufacture lactose. | Limitations/ Specifi- cations |
November 4, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Enviro Tech Chemical Services, Incorporated | ||||||||||||||||||||||||||||||||
642 | Copolymer of monoacryloxyethyl succinate (MAES) (CAS Reg. No. 50940-49-3) and monoacryloxyethyl hexahydrophthalate (MAHP) (CAS Reg. No. 57043-35-3), and lauryl acrylate (LA) (CAS Reg. No. 2156-97-0). The ratio of the MAES: MAHP is in the range of 75:25 percent to 50:50 percent by weight. LA may be used at 0-10 percent by weight of the total monomer units. | Northwest Coatings | As an electron beam (EB) curable laminating adhesive, for use in multilayer films when separated from food by a barrier layer. | Limitations/ Specifi- cations |
September 29, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Northwest Coatings | ||||||||||||||||||||||||||||||||
643 | Siloxanes and silicones, di-Me (CAS Reg. No. 63148-62-9). | E.I. du Pont de Nemours and Company, Incorporated | For use as a dispersant for pigments used as colorants for all food-contact polymers. | Limitations/ Specifi- cations |
September 29, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
E.I. du Pont de Nemours and Company, Incorporated | ||||||||||||||||||||||||||||||||
644 | Chlorine Dioxide (CAS Reg. No. 10049-04-4) | JohnsonDiversey | As an antimicrobial agent in water used in poultry processing and to wash fruits and vegetables that are not raw agricultural commodities. | Limitations/ Specifi- cations |
December 15, 2006 | EA/FONSI | ||||||||||||||||||||||||||
JohnsonDiversey | ||||||||||||||||||||||||||||||||
645 | Chlorine Dioxide | Selective Micro Technologies, LLC | As an antimicrobial agent in water used in poultry processing and to wash fruits and vegetables that are not raw agricultural commodities in an amount not to exceed 3ppm residual chlorine dioxide as determined by methods specified in 21 CFR 173.300. The treated fruits or vegetables will be further processed by blanching, canning or cooking, or consumed as fresh-cut fruits and vegetables. | Limitations/ Specifi- cations |
December 22, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Selective Micro Technologies, LLC | ||||||||||||||||||||||||||||||||
646 | Copolymers of 2-perfluoroalkylethyl acrylate, 2-N,N-diethylaminoethyl methacrylate, glycidyl methacrylate, acrylic acid, and methacrylic acid (CAS Reg. No. 870465-08-0). | DuPont Chemical Solutions Enterprise | As an oil and grease resistant treatment for paper and paperboard employed either prior to the sheet forming operation or at the size press. | Limitations/ Specifi- cations |
September 30, 2006 | CAT. EXCL. 21 CFR 25.32(i) and EA |
||||||||||||||||||||||||||
DuPont Chemical Solutions Enterprise | ||||||||||||||||||||||||||||||||
647 | Formamide, N,N-1,6-hexanediylbis[N-(2,2,6,6-tetramethyl-4-piperidinyl)]- (CAS Reg. No. 124172-53-8). | BASF Aktiengesellschaft | For use as a UV light stabilizer in Polystyrene complying with 21 CFR 177.1640, styrene block copolymers complying with 21 CFR 177.1810, acrylonitrile copolymers and resins complying with 21 CFR 181.32 and Polypropylene (PP) complying with 21 CFR 177.1520. | Limitations/ Specifi- cations |
October 3, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
649 | Polyethylene terphthalate, modified with a derivative of hexamethyldisilazane and tetraethyl orthosilicate. | PTP Plastic Technologies & Products B.V. | For use as a basic resin in food-contact articles. | Limitations/ Specifi- cations |
October 3, 2006 | EA/FONSI | ||||||||||||||||||||||||||
PTP Plastic Technologies & Products B.V. | ||||||||||||||||||||||||||||||||
650 | Hydrogenated styrene butadiene (15 percent styrene to 85 percent butadiene, 67 percent styrene to 33 percent butadiene, or both grades in combination) (CAS Reg. No. 66070-58-4) used in conjuhction with cobalt stearate (CAS Reg. No. 13586-84-0). | Toyo Seikan Kaisha, Ltd. | The FCS is intended for use as a component of a linear low-density polyethylene (LLDPE) oxygen scavenging barrier layer, which is used as a non-food contact layer in multilayer LDPE bottles. | Limitations/ Specifi- cations |
October 5, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Toyo Seikan Kaisha, Ltd. | ||||||||||||||||||||||||||||||||
652 | 2,2'-Methylenebis(6-(2H-benzotriazol-2-y1)-4-(1 ,1,3,3-tetramethylbutyl)phenol) (CAS Reg. No. 103597-45-1). | Adeka Corporation | As an ultraviolet light absorber in polyethylene phthalate polymers intended for use in contact with food. | Limitations/ Specifi- cations |
October 20, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Adeka Corporation | ||||||||||||||||||||||||||||||||
653 | Crosslinked 2-propenoic acid, homopolymer, sodium salt (CAS Reg. No. 9003-04-7). | BASF Aktiengesellschaft | As a fluid absorbent in food contact materials. | Limitations/ Specifi- cations |
October 25, 2006 | EA/FONSI | ||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
654 | 2-Propenoic acid, polymer with N-ethenylformamide, sodium salt (CAS Reg. No.865535-22-4). | BASF Aktiengesellschaft | The FCS is intended for use as a dry-strength agent, fixing agent, or retention aid in paper and paperboard. | Limitations/ Specifi- cations |
November 9, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
656 | Pyrrolo[3,4-c]pyrrole-1,4-dione,3,6-bis[3-(dodecylsulfonyl) phenyl]-2,5-dihydro- (CAS Reg. No. 884862-07-1). | Clariant Corporation | As a surface modifier in colorants for polymers. | Limitations/ Specifi- cations |
November 14, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Clariant Corporation | ||||||||||||||||||||||||||||||||
657 | Sodium Xylene Sulfonate (CAS Reg. No. 1300-72-7). | Ecolab Incorporated | As an anionic surfactant, hydrotrope, and coupling agent in commercial, single use dishwashing rinse-aid products to be used in commercial establishments. | Limitations/ Specifi- cations |
November 17, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Ecolab Incorporated | ||||||||||||||||||||||||||||||||
659 | Hexanedioic acid, polymer with hexahydro-2H-azepin-2-one, bis(4-aminocyclohexyl)methane and 1,6-hexanediamine (Nylon 6/66/136) (CAS Reg. No. 25053-13-8). | BASF Aktiengesellschaft | The FCS is intended for use as a thin coating for food packaging materials, especially for plastic film and paper. | Limitations/ Specifi- cations |
November 22, 2006 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
660 | C10-C12 Ethoxylated Alcohol (CAS Reg. No. 68002-97-1). | Ecolab Incorporated | As a processing aid in rinse-aid products used in commercial dishwashing machines. | Limitations/ Specifi- cations |
November 28, 2006 | EA/FONSI | ||||||||||||||||||||||||||
Ecolab Incorporated | ||||||||||||||||||||||||||||||||
662 | Nonitol, 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]- (CAS Reg. No. 882073-43-0). | Milliken Chemical | For use as a clarifying agent in polypropylene and high-polypropylene olefin copolymers. | Limitations/ Specifi- cations |
December 14, 2006 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Milliken Chemical | ||||||||||||||||||||||||||||||||
663 | Sulfonic acids, C10-C18 alkane, phenyl esters (CAS Reg. No. 70775-94-9). | Lanxess Deutschland GmbH | As a plasticizer for polyvinyl chloride (PVC) polymers, for single and repeated-use food-contact articles. | Limitations/ Specifi- cations |
February 7, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Lanxess Deutschland GmbH | ||||||||||||||||||||||||||||||||
664 | N,N'-bis(phenylmethy1)hexanediamide (CAS Reg. No. 25344-24-5), used in conjunction with cobalt neodecanoate (CAS Reg. No. 27253-31-2). | Constar International | The FCS will be used as a modifier of ethylene phthalate/naphthalate polymers and copolymers, excluding those modified with organic anhydrides. | Limitations/ Specifi- cations |
January 5, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Constar International | ||||||||||||||||||||||||||||||||
665 | Hexanedioic acid, polymer with 1,3-benzenedimethanamine (CAS Reg No. 25718-70-1), meeting the analytical specifications in 21 CFR 177.1500(b) item 10.2, when tested by the method given in 21 CFR 177.1500(d). | Gruppo Mossi & Ghisolfi | For use as a modifier of ethylene phthalate polymers complying with 21 CFR 177.1630 and ethylene phthalate polymers that are the subject of an effective FCN. | Limitations/ Specifi- cations |
January 10, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Gruppo Mossi & Ghisolfi M&G Polymers USA LLC |
||||||||||||||||||||||||||||||||
666 | 2-Propenoic acid, polymer with N-ethenylformamide, sodium salt, hydrolyzed, hydrochlorides (CAS Reg. No. 865596-61-8). | BASF Aktiengesellschaft | The FCS is intended for use as a dry-strength agent, fixing agent, and/or retention aid, in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
January 18, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
668 | Chlorine dioxide (CAS Reg. No. 10049-04-4) | Drew Industrial Division, Ashland Specialty Chemical Company, Ashland, Incorporated |
As an antimicrobial agent to be applied to red meat (including meat parts and organs), raw agricultural commodities, processed, comminuted or formed meat products, and seafood. | Limitations/ Specifi- cations |
March 16, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Drew Industrial Division, Ashland Specialty Chemical Company, Ashland, Incorporated |
||||||||||||||||||||||||||||||||
669 | 1,4-cyclohexanedicarboxylic acid, polymer with 1,5-bis[[1-(hydroxymethyl)propyl]amino]-9,10- anthracenedione, 1,4-cyclohexanedirnethanol, hexanedioic acid and 2-methyl-l,5-pentanediamine, reaction products with phenyl ether (CAS Reg. No. 867303-34-2). | DAY-GLO Color Corporation | As a colorant in food-contact polypropylene (PP). | Limitations/ Specifi- cations |
January 26, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
DAY-GLO Color Corporation | ||||||||||||||||||||||||||||||||
670 | A mixture of peroxyacetic acid, hydrogen peroxide, and 1-hydroxyethylidine-1, 1-diphosphonic acid, with or without an optional adjuvant system composed of a mixture dimethyl sebacate (up to 20 percent), dimethyl succinate (up to 0.8 percent), dimethyl adipate (68-76 percent) and dimethyl glutarate (4-12 percent). | Ecolab, Incorporated | As an antimicrobial additive that may be used alone or in combination with other processes in the commercial sterilization of polyethylene terephthalate and high density polyethylene food packaging prior to filling. | Limitations/ Specifi- cations |
January 30, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Ecolab, Incorporated | ||||||||||||||||||||||||||||||||
671 | Poly(oxy-1, 2-ethanediyl), alpha-hydro-omega-hydroxy-(CAS Reg. No. 25322-68-3). | Greenwich Chemical Consulting, Incorporated | As a component of adhesives used in contact with food, compliant with 21 CFR 175.105; and as a component of pressure-sensitive adhesives used as the food-contact surface of labels and/or tapes applied to food, compliant with 21 CFR 175.125(a) or (b). | Limitations/ Specifi- cations |
January 31, 2007 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Meisei Chemical Works, Ltd./Kowa American Corporation | ||||||||||||||||||||||||||||||||
673 | D,L-Aspartic acid, N-(1,2-dicarboxyethyl)-,tetrasodium salt (CAS Reg. No. 144538-83-0). | LANXESS Deutschland GmbH | The FCS is intended for use as a stabilizer for bleach used in the production of food-contact-paper and paperboard, added at the wet end. | Limitations/ Specifi- cations |
March 21, 2007 | EA/FONSI | ||||||||||||||||||||||||||
LANXESS Deutschland GmbH | ||||||||||||||||||||||||||||||||
675 | Mixture of 5-chloro-2-methyl-4-isothiazolin-3-one (CAS Reg. No. 26172-55-4) and 2-methyl-4-isothiazolin-3-one (CAS Reg. No. 2682-20-4) at a ratio of 3 parts to 1 part by weight. | Thor GmbH, Germany | The FCS is intended for use as a preservative in aqueous coatings formulated using components permitted for use in coatings and/or in coating components complying with 21 CFR 175.300. | Limitations/ Specifi- cations |
February 8, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Thor GmbH, Germany | ||||||||||||||||||||||||||||||||
676 | Octyltriethoxysilane-modified titanium dioxide where the addition of octyltriethoxysilane does not exceed 1.6 percent by weight of the pigment. | E I du Pont de Nemours and Company, Incorporated | As a pigment in food-contact polymers. | Limitations/ Specifi- cations |
February 8, 2007 | EA/FONSI | ||||||||||||||||||||||||||
E I du Pont de Nemours and Company, Incorporated | ||||||||||||||||||||||||||||||||
677 | Nylon MXD-6 (also known as hexanedioic acid, polymer with 1,3-benzenedimethanamine) (CAS Reg. No. 25718-70-1) meeting the analytical specifications in 21 CFR 177.1500(b), item 10.2 and used in conjunction with cobalt stearate (CAS Reg. No. 13586-84-0). | INVISTA S.à.r.l. Mitsubishi Gas Chemical Company Incorporated |
The FCS will be used as a modifier for polyethylene terephthalate copolyesters described in Food-Contact Notification No. 72 and Food-Contact Notification No. 498. | Limitations/ Specifi- cations |
February 20, 2007 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
INVISTA S.à.r.l. Mitsubishi Gas Chemical Company Incorporated |
||||||||||||||||||||||||||||||||
678 | Sulfonic acids, C10-18-alkane, sodium salts (CAS Reg. No. 68037-49-0). | Goulston Technologies, Incorporated | The FCS is to be used as an antifogging agent anchor in multi-layer polyolefin lettuce bags. | Limitations/ Specifi- cations |
February 20, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Goulston Technologies, Incorporated | ||||||||||||||||||||||||||||||||
679 | Benzene, ethenyl-, polymer with 1,3-butadiene, hydrogenated (CAS Reg. No. 66070-58-4). | Kraton Polymers LLC | The FCS will be blended with other polymers to improve the flexibility and durability of polymeric food-contact articles. | Limitations/ Specifi- cations |
April 7, 2007 | EA/FONSI and CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Kraton Polymers LLC | ||||||||||||||||||||||||||||||||
680 | Styrene-acrylonitrile copolymers (SAN) (CAS Reg. No. 9003-54-7) containing 30-35 percent by weight polymer units derived from acrylonitrile. | SABIC Innovative Plastics | As a component in the manufacture of repeated-use food-contact articles. | Limitations/ Specifi- cations |
February 27, 2007 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
681 | 3-Chloro-2-hydroxypropyltrimethylammonium chloride (CAS Reg. No. 3327-22-8). | Grain Processing Corporation | For use as a starting material in the production of 2,3-epoxypropyltrimethylammonium chloride (EPTAC) (CAS Reg. No. 3033-77-0) that will be used to modify industrial starch at a treatment level of greater than 5 percent and not more than 21 percent by weight of the starch to form high cationic starch (HCS). The finished HCS is intended for use as a retention aid and/or drainage aid and/or dry-strength agent employed prior to the sheet forming operation in the manufacture of all food-contact paper and paperboard. | Limitations/ Specifi- cations |
February 28, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Grain Processing Corporation | ||||||||||||||||||||||||||||||||
684 | Poly(buty1)acrylate containing no more than 10 weight percent of total polymer units from one or more of the following monomers: methyl methacrylate, methacrylic acid, ethylene glycol dimethacrylate and N-methylolmethacrylamide. | Omnova Solutions, Incorporated | For use as an adhesive in food contact articles. | Limitations/ Specifi- cations |
March 20, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Omnova Solutions, Incorporated | ||||||||||||||||||||||||||||||||
685 | Benzenesulfonic acid, 2,2’-(1,2-ethenediyl)bis(5-(4-(bis(2-hydroxyethyl)amino)-6-((4- sulfophenyl)amino)-1,3,5-triazin-2-yl)amino)-tetrasodium salt: (CAS Reg. No. 16470-24-9). | Teh Fong Min International Co., Ltd. | The FCS is intended for use as an optical brightener in food-contact paper and paperboard, complying with 21 CFR 176.170 (Components of paper and paperboard in contact with aqueous and fatty foods). | Limitations/ Specifi- cations |
March 20, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Teh Fong Min International Co., Ltd. | ||||||||||||||||||||||||||||||||
686 | Di(p-toly1idene)sorbitol (DPTS) (CAS Reg. No. 54686-97-4; 81541-12-0; 197809-37-3). | New Japan Chemical Company Ltd. | The FCS is intended for use as a nucleating agent for polypropylene homo- and copolymers. | Limitations/ Specifi- cations |
June 5, 2007 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
New Japan Chemical Company Ltd. | ||||||||||||||||||||||||||||||||
687 | Decanedioic acid polymer with 2-hydroxypropanoic acid and 1,2-propanediol, block- (CAS Reg. No. 329223-54-3). | Dainippon Ink and Chemicals, Incorporated | As a modifier in the manufacture of polylactide (PLA) polymers for single-use food-contact articles. | Limitations/ Specifi- cations |
May 24, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Dainippon Ink and Chemicals, Incorporated | ||||||||||||||||||||||||||||||||
688 | N-ethyl-N-hydroxy-ethanamine (CAS Reg. No. 3710-84-7). | Arkema Incorporated | As a polymerization regulator in the polymerization of vinyl chloride homopolymers and copolymers used in contact with food. | Limitations/ Specifi- cations |
May 30, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Taminco Higher Amines, Inc. | ||||||||||||||||||||||||||||||||
689 | 1,4-benzenedicarhoxylic acid polymer with 1,4-cyclohexanedimethanol and 1,2-ethanediol (CAS Reg. No. 25038-91-9), with 1,4-cyclohexanedimethanol(consisting of 70 percent trans isomer and 30 percent cis isomer) representing 35 to 80 mole percent of the diol units and 1,2-ethanediol representing 65 to 20 mole percent of the diol units. | SK Chemicals | As articles or component of articles intended to contact food. | Limitations/ Specifi- cations |
April 3, 2007 | EA/FONSI | ||||||||||||||||||||||||||
SK Chemicals | ||||||||||||||||||||||||||||||||
691 | A mixture of peroxyacetic acid, hydrogen peroxide, and 1-hydroxyethylidine-1,l-diphosphonic acid, with or without an optional adjuvant system composed of a mixture dimethyl sebacate (up to 20 percent by weight), dimethyl succinate (up to 0.8 percent by weight), dimethyl adipate (68-76 percent by weight) and dimethyl glutarate (4-12 percent by weight). | Ecolab, Incorporated | As an antimicrobial additive that may be used alone or in combination with other processes in the commercial sterilization of polyethylene terephthalate and high density polyethylene food packaging prior to filling. | Limitations/ Specifi- cations |
April 4, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Ecolab, Incorporated | ||||||||||||||||||||||||||||||||
692 | Hypochlorous acid (CAS Reg. No. 7790-92-3) eletrolytically generated in dilute solution with pH control. | Sterilox Food Safety/Div. of PuriCore | For use as an antimicrobial agent in a solution for the re-hydrating of fresh fruits and vegetables including leafy green vegetables. | Limitations/ Specifi- cations |
May 24, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Sterilox Food Safety/Div. of PuriCore | ||||||||||||||||||||||||||||||||
694 | Poly(l2-hydroxystearic acid)-polyethyleneimine copolymer (CAS Reg. No. 124578-12-7). | Lubrizol, Ltd. | As a colorant dispersant for use in all food-contact polymers. | Limitations/ Specifi- cations |
April 17, 2007 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Lubrizol, Ltd. | ||||||||||||||||||||||||||||||||
695 | lH-Azepine-1-carboxamide,N,N’,N”-[(2,4,6-trioxo-l,3,5-triazine-l,3,5(2H,4H,6H)- triyl)tris[methylene(3,5,5-trimethyl-3,1-cyclohexanediyl)]]trls[hexahydro-2-oxo-] (CAS Reg. No. 68975-83-7). | Bayer MaterialScience AG | To be used as a reactant with one or more of the polybasic acids or polyhydric alcohols in the formation of coatings on metal substrates intended for use in food-contact applications, complying with 21 CFR 175.300(b)(3)(vii). | Limitations/ Specifi- cations |
June 15, 2007 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Bayer MaterialScience AG | ||||||||||||||||||||||||||||||||
697 | Zeolite A in which silver and zinc ions have been exchanged for sodium ions. | Cosmo Advanced Material Company, Ltd. | As an antimicrobial agent used to preserve food contact polymers intended for repeat use articles. | Limitations/ Specifi- cations |
April 27, 2007 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Cosmo Advanced Material Company, Ltd. | ||||||||||||||||||||||||||||||||
698 | 2-n-octyl-4-isothiazolin-3-one(OIT) (CAS Reg. No. 26530-20-1). | Thor GmbH, Germany | The FCS is intended for use as an antimicrobial active ingredient of industrial technical formulations for use in preserving polymeric latex emulsion products destined for use in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
June 15, 2007 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
Thor GmbH, Germany | ||||||||||||||||||||||||||||||||
699 | A mixture of peroxyacetic acid, hydrogen peroxide, and 1-hydroxyethylidine-1,1-diphosphonic acid. | Enviro Tech Chemical Services, Incorporated | As an antimicrobial to control microorganisms in ice and wash water used to commercially prepare fish and seafood. | Limitations/ Specifi- cations |
May 8, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Enviro Tech Chemical Services, Incorporated | ||||||||||||||||||||||||||||||||
701 | 1-Ethynyl-1-cyclohexanol (CAS Reg. No. 78-27-3). | Wacker Chemical Corporation | To be used as an inhibitor for platinum catalysts to prevent premature cross linking of vinyl functionalized polysiloxanes with hydrogen functionalized polysiloxanes to form silicone elastomers in compliance with 21 CFR 177.2600 (Rubber articles intended for repeated use). | Limitations/ Specifi- cations |
May 10, 2007 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Wacker Chemical Corporation | ||||||||||||||||||||||||||||||||
702 | Carbonic dichloride, polymer with 4,4’-cyclohexylidenebis[2-methylphenol] and 4,4’-(1- methylethylidene)bis[phenol], bis[4-(1-methyl-1-phenylethyl)phenyl] ester (CAS Reg. No. 411234-34-9). | SABIC Innovative Plastics | As a component in the manufacture of articles intended to contact food. | Limitations/ Specifi- cations |
May 19, 2007 | EA/FONSI | ||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
704 | Mixture of 5-chloro-2-methyl-4-isothiazolin-3-one(CAS Reg. No. 26172-55-4) and 2-methyl-4- isothiazolin-3-one (CAS Reg. No. 2682-20-4) at a ratio of 3 parts to 1 part by weight. | Thor GmbH, Germany | The FCS is intended for use as a preservative in resinous and polymeric coatings for polyolefin films complying with 21 CFR 175.320. | Limitations/ Specifi- cations |
May 22, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Thor GmbH, Germany | ||||||||||||||||||||||||||||||||
705 | 1-Octadecanol, phosphate, potassium salt (CAS Reg. No. 68987-29-1) | Goulston Technologies, Inc.; Takemoto Oil & Fat Co., Ltd. | As a finish component on polyolefin and polyethylene phthalate resins that are constructed into non-woven fabric for meat pads. | Limitations/ Specifi- cations |
July 14, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Goulston Technologies, Inc.; Takemoto Oil & Fat Co., Ltd. | ||||||||||||||||||||||||||||||||
706 | Potassium laury1 phosphate (CAS Reg. No. 39322-78-6) | Goulston Technologies, Inc. | As a finish component on polyolefin and polethylene phthalate resins that are constructed into non-woven fabric for meat pads. | Limitations/ Specifi- cations |
July 14, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Goulston Technologies, Inc.; Takemoto Oil & Fat Co., Ltd. | ||||||||||||||||||||||||||||||||
707 | 2-Butenedioic (Z)-, ammonium salt, homopolymer, hydrolyzed, sodium salts (CAS Reg. No. 181828-06-8). | LANXESS Deutschland GmbH | The FCS is intended for use as (1) a dispersant for fillers (e.g., clay, calcium carbonate, etc.) in the wet-end during the manufacture of paper and paperboard intended for food-contact use, and (2) as an anti-scale additive during the processing /evaporation of raw beet and cane sugar juice. | Limitations/ Specifi- cations |
July 27, 2007 | EA/FONSI | ||||||||||||||||||||||||||
LANXESS Deutschland GmbH | ||||||||||||||||||||||||||||||||
708 | Propylene/ethylene copolymers containing up to 28 weight percent polymer units derived from ethylene
(CAS Reg. No. 9010-79-1). REPLACES FCNs #381 AND 449 |
The Dow Chemical Company | As articles or components of articles used in contact with food. | Limitations/ Specifi- cations |
June 5, 2007 | EA/FONSI | ||||||||||||||||||||||||||
The Dow Chemical Company K-Dow Petrochemicals BV |
||||||||||||||||||||||||||||||||
709 | 2-Propenoic acid, sodium salt, homopolymer (CAS Reg. No. 9003-04-7). | Coatex S.A.S. | As an aid for grinding calcium carbonate filler to be used in food-contact polyolefin food-contact materials. | Limitations/ Specifi- cations |
June 5, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Coatex S.A.S. Coatex Netherlands BV Coatex Incorporated |
||||||||||||||||||||||||||||||||
710 | Anthra[2,1,9-def:6,5,10-d’e’f’]diisoquinoline-1,3,8,10(2H,9H)-tetrone,2,9-bis [2,6-bis (1- methylethyl)phenyl]-5,6,12,13-tetraphenoxy- (CAS Reg. No. 112100-07-9). | BASF Aktiengesellschaft | As a colorant component in the top coat for paper and paper board which are used for packaging all kinds of foodstuff for marking paper. | Limitations/ Specifi- cations |
June 8, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
711 | Styrene-1,3-butadiene block copolymer containing 60 - 75 weight-percent of polymer units derived from styrene (CAS Reg. No. 106107-54-4). | BASF Aktiengesellschaft | The FCS is intended for use in the manufacture of food-contact polymer films and coatings. | Limitations/ Specifi- cations |
June 8, 2007 | EA/FONSI | ||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
712 | 2-Propionic acid, 2-methyl-, methyl ester, polymer with 1,4-butanediyl di-2-propenoate (CAS Reg. No. 81565-33-5). | BASF Aktiengesellschaft | To be used in an aqueous dispersion (about 33 percent by weight of the solids content) where the FCS exists as highly crosslinked poly(methy1 methacrylate)/l,4-butanediol diacrylate microspheres, which contains fluorescence colorants. The FCS is to be used as a top coat for paper and paperboard to enable the authentication of paper and paperboard products. | Limitations/ Specifi- cations |
June 8, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
713 | 2,6-Naphthalenedicarboxamide,N,N'-dicyclohexyl- (CAS Reg. No. 153250-52-3). | New Japan Chemical Company, Ltd. | As a nucleating agent in propylene homopolymers complying with 21 CFR 177.1520(a)(l)(i) and (ii) and in propylene copolymers complying with 21 CFR 177.1520(a)(3)(i) or in propylene homopolymers and copolymers that are the subject of an effective notification. | Limitations/ Specifi- cations |
June 12, 2007 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
New Japan Chemical Company, Ltd. | ||||||||||||||||||||||||||||||||
715 | Amines, tallow alkyl, ethoxylated (CAS Reg. No. 61791-26-2). | 3M, Industnal Adhesives and Tapes Division | The FCS is intended to be used as a component of repulpable tape adhesives used in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
June 20, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Akzo Nobel | ||||||||||||||||||||||||||||||||
716 | REPLACED BY FCN #818 | Limitations/ Specifi- cations |
||||||||||||||||||||||||||||||
717 | Formaldehyde polymer with 1-naphthalenol (CAS Reg. No. 25359-91-5) | Akzo Nobel Polymer Chemicals, LLC | For use as an anti-scaling or release agent, applied to the internal parts of reactors employed in the production of ethylene-vinyl acetate food-contact copolymers. | Limitations/ Specifi- cations |
June 21, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Akzo Nobel Polymer Chemicals, LLC | ||||||||||||||||||||||||||||||||
719 | Pentaerythritol tetra(3-dodecylthiopropionate) (CAS Reg. No. 29598-76-3) | Adeka Corporation | As a stabilizer in propylene polymers and copolymers compliant with 21 CFR 177.1520. | Limitations/ Specifi- cations |
July 6, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Adeka Corporation | ||||||||||||||||||||||||||||||||
720 | Benzene, ethenyl-, polymer with 1,3-butadiene, hydrogenated, 4-methyl-1,3,2- dioxaborinan-2-yl 4-methyl-1,3,2-dioxaborolan-2-yl derivatives (CAS Reg. No. 500224-31-7) | Kuraray Company Ltd. | To be used in ethylene vinyl alcohol (EVOH) polymers complying with 21 CFR 177.1360 and in polyolefin polymers complying with 21 CFR 177.1520, which may contact food. | Limitations/ Specifi- cations |
July 13, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Kuraray Company Ltd. | ||||||||||||||||||||||||||||||||
721 | 1,3-Benzenedicarboxylic acid, polymer with 1,3-benzenedimethanamine and hexanedioic acid (CAS Reg. No. 28628-75-3) | EMS-CHEMIE AG/EMS-CHEMIE (NORTH AMERICA) INC. | For use as a component of non-food-contact layers of multilayer articles; the thickness of the FCS component of the non-food-contact layer will not exceed 85 µm and will be separated from food by one or more layers of PET having a total thickness of at least 85 µm. | Limitations/ Specifi- cations |
August 30, 2007 | EA/FONSI | ||||||||||||||||||||||||||
EMS-CHEMIE AG/EMS-CHEMIE (NORTH AMERICA) INC. | ||||||||||||||||||||||||||||||||
722 | Vinylidene chloride/vinyl chloride/methyl acrylate copolymer (CAS Reg. No. 28572-91-0). | BASF Corporation | As a component of coatings applied to fresh fruits and vegetables with inedible peels, excluding citrus fruits. | Limitations/ Specifi- cations |
August 28, 2007 | EA/FONSI | ||||||||||||||||||||||||||
BASF Corporation | ||||||||||||||||||||||||||||||||
724 | An equilibrium mixture of peroxyacetic acid, hydrogen peroxide, acetic acid, and 1-hydroxyethylidene-diphosphonic acid (HEDP) | Degussa Corporation | As an antimicrobial agent to control microbial growth in wash and chilling water that contacts fruits and vegetables that are not raw agricultural commodities. | Limitations/ Specifi- cations |
July 26, 2007 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
Degussa Corporation | ||||||||||||||||||||||||||||||||
725 | Poly(oxy[1,1'-biphenyl]-4,4'-diyloxy-1,4-phenylenesulfonyl-1,4-phenylene)(CAS Reg. No. 25839-81-0). | BASF Aktiengesellschaft | The FCS is intended for use as a resin in the manufacture of food contact articles intended for single and repeat use. | Limitations/ Specifi- cations |
October 9, 2007 | EA/FONSI | ||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
726 | Poly(oxy-p-phenylenesulfonyl-p-phenylene) resin (CAS Reg. No. 25667-42-9). | BASF Aktiengesellschaft | As food-contact articles or components of food-contact articles. | Limitations/ Specifi- cations |
October 9, 2007 | EA/FONSI | ||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
727 | 1,4-Benzenedicarboxylic acid compound with 1,6-hexanediamine (1:1), polymer with hexahydro-2H-azepin-2-one [Nylon 6/6T] (CAS Reg. No. 51025-80-0). | BASF Aktiengesellschaft | As a component of repeat-use food contact articles including bakeware. | Limitations/ Specifi- cations |
October 12, 2007 | EA/FONSI | ||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
728 | Peroxyacetic acid (CAS Reg. No. 79-21-0), hydrogen peroxide (CAS Reg. No. 7722-84-1), acetic acid (CAS Reg. No. 64-19-7), 1-hydroxyethylidene-1,1-diphosphonic acid (CAS Reg. No. 2809- 21-4), and water. | FMC Corporation | The FCS will be used as a part of the process to treat food-contact surfaces of polymeric food packaging to attain commercial sterility at least equivalent to that attainable by thermal processing for metal containers as provided for by 21 CFR Part 113, and as an antimicrobial on all polymers used to package acidic foods. | Limitations/ Specifi- cations |
September 12, 2007 | EA/FONSI | ||||||||||||||||||||||||||
FMC Corporation | ||||||||||||||||||||||||||||||||
729 | Polymer of dimethyl terephthalate, 1,4-cyclohexanedimethanol, and 2,2,4,4-tetramethyl- 1,3- cyclobutanediol (CAS Reg. No. 261716-94-3) containing 2,2,4,4-tetramethyl- 1,3- cyclobutanediol at up to 40 mole percent (expressed as mole % of the glycol component of the finished copolyesters) and 1,4-cyclohexanedimethanol at no less than 60 mole percent. | Eastman Chemical Company | The FCS will be used as a component in the manufacture of repeated use food-contact articles. | Limitations/ Specifi- cations |
August 8, 2007 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Eastman Chemical Company | ||||||||||||||||||||||||||||||||
730 | 35 percent ammonium bromide solution (CAS Reg. No. 12124-97-9). | AmeriBrom Inc. | The FCS is intended for use as an antimicrobial agent for finished coating formulations for paper and for additives to the finished coating formulations including starch slurries, sizing solutions, pigments, fillers, and binders used in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
August 9, 2007 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
AmeriBrom Inc. | ||||||||||||||||||||||||||||||||
731 | Hexanedioic acid, polymer with hexahydro-2H-azepin-2-one and 1,6-hexanediamine [Nylon 6/66] (CAS Reg. No. 24993-04-2) | BASF Aktiengesellschaft | As a component of films intended to contact food. | Limitations/ Specifi- cations |
August 14, 2007 | EA/FONSI | ||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
732 | Poly(alkyl methacrylates) made from one or more C12 - C17 alkyl methacrylates (where the alkyl groups may be branched or linear and may be even- or odd-numbered in chain length), polymerized alone or in combination with one or more of the C18 - C22 alkyl methacrylate monomers permitted as reactants for poly(alkylmethacrylate) under 21 CFR 172.886(c)(2). | RohMax U.S.A., LP RohMax Canada Inc. RohMax France S.A.S. RohMax Additives GmbH RohMax Asia Pacific Pte Ltd. |
As a processing aid in the manufacture of petroleum wax that may be used as a direct food ingredient in compliance with CFR 172.886 and as a food-contact substance in compliance with 21 CFR 178.3710. | Limitations/ Specifi- cations |
October 1, 2007 | EA/FONSI | ||||||||||||||||||||||||||
RohMax U.S.A., LP RohMax Canada Inc. RohMax France S.A.S. RohMax Additives GmbH RohMax Asia Pacific Pte Ltd. |
||||||||||||||||||||||||||||||||
733 | Polyester-polyurethane adhesive formulated from the following: (a) Urethane cross-linking agent, comprising not more than 75 percent by weight of the cured adhesive, prepared by the reaction of a mixture of 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate, homopolymer (CAS Reg. No. 53880-05-0) and 1,3-bis(isocyanatomethyl)benzene (CAS Reg. No. 25854-16-4), and a polyester prepared by the reaction of a mixture of acids and alcohols listed in 21 CFR 175.300(b)(3)(vii), (b) Polyester resins prepared by the reaction of a mixture of acids and alcohols listed in 21 CFR 175.300 (b)(3)(vii). Additionally, 1,6-hexanediol may be used as an alcohol reactant. (c) Optional use, in either the urethane cross-linking agent or polyester resin portions of the resin, of: 1) acid anhydride formulated from 3a, 4, 5, 7a-tetrahydro-7-methyl-5- (tetrahydro-2,5-dioxo-3-furanyl) -1,3-isobenzofurandione (CAS Reg. No. 73003-90-4), comprising not more than 3 percent by weight of the cured adhesive, and/or 2) trimethoxysilane coupling agents containing amino, epoxy, ether, or mercapto groups comprising not more than 3 percent by weight of the cured adhesive. |
Dainippon Ink and Chemicals, Inc. | For use as an adhesive in laminate structures that are intended for use at retort temperatures. | Limitations/ Specifi- cations |
October 3, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Dainippon Ink and Chemicals, Inc. | ||||||||||||||||||||||||||||||||
734 | 1-Naphaleneamine, N-phenyl-ar-(1,1,3,3-tetramethylbutyl)- (CAS Reg. No. 68259-36-9) (para isomer) | Ciba Specialty Chemicals Corporation | For use as an antioxidant in lubricants with incidental food contact under conditions of use A through H as described in 21 CFR 176.170(c), Table 2 | Limitations/ Specifi- cations |
August 23, 2007 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
735 | A thermoplastic polyurethane formulated from 1,6-hexanediolpolycarbonate (CAS Reg. No. 101325-00-2), 4,4’-diphenylmethane diisocyanate (CAS Reg. No. 101-68-8) and 2,2’-p-phenylenedioxydiethanol (CAS Reg. No. 104-38-l). | Dichtungs-und Maschinenhandelsges.m.b.H. | The FCS is a special-shaped molded ring (seal) that prevents processed food from contacting other moving parts of machinery (e.g., pistons, rods, etc.). | Limitations/ Specifi- cations |
August 24, 2007 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Dichtungs-und Maschinenhandelsges.m.b.H. | ||||||||||||||||||||||||||||||||
736 | 1-Propene,1,1,2,3,3,3-hexafluoro-, polymer with 1,1-difluoroethene (CAS Reg. No. 9011-17-0) modified with a halogenated ethylene as described in the food contact notification. | Dyneon (a 3M Company) | As a processing additive for all polymers for use in contact with food. | Limitations/ Specifi- cations |
October 26, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Dyneon (a 3M Company) | ||||||||||||||||||||||||||||||||
737 | Poly[bis(isoindol-2-yl-1,3-dione)-1,3-phenylene-4,4'-(1-methylethylidene)bisphenol]. | SABIC Innovative Plastics | As a component of food contact articles. | Limitations/ Specifi- cations |
September 5, 2007 | EA/FONSI | ||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
739 | An aqueous solution of sodium chlorite and chlorine dioxide containing up to 1200 mg/kg sodium chlorite and up to 30 mg/kg chlorine dioxide. | Bio-Cide International, Inc. | For use on poultry carcasses, carcass parts, poultry meat, organs, or related parts or trim as an antimicrobial agent in poultry processing waters, as a component of a carcass spray or a dip solution. | Limitations/ Specifi- cations |
October 26, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Bio-Cide International, Inc. | ||||||||||||||||||||||||||||||||
740 | Acrylate copolymers containing up to 2 percent by weight of 2-propenoic acid, 4-(((4-benzoylphenoxy)carbonyl)oxy)butyl ester (CAS Reg. No. 131513-00-3) along with 2-propenoic acid, n-butyl-2-propenoate, 2-ethylhexyl 2-propenoate, methyl 2-propenoate, and/or 2-methyl-2-propenoic acid methyl ester (CAS Reg. Nos. 25265-15-0; 98060-25-4; 25119-83-9). | BASF Aktiengesellschaft | As a component of UV-cured pressure-sensitive adhesives used as the food-contact surface of labels and/or tapes applied to food, compliant with 21 CFR 175.125(a) or (b). | Limitations/ Specifi- cations |
September 14, 2007 | EA/FONSI | ||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
741 | Ethylene/hexene copolymers containing up to 25 weight percent polymer units derived from hexene (CAS Reg. No. 25213-02-9). | The Dow Chemical Company | The FCS will be used as articles or components of articles intended to contact all food types under Conditions of Use A through H, as described in Table 2. | Limitations/ Specifi- cations |
September 28, 2007 | EA/FONSI | ||||||||||||||||||||||||||
The Dow Chemical Company K-Dow Petrochemicals BV |
||||||||||||||||||||||||||||||||
742 | Copolymers produced by the polymerization of 6-hydroxy-2-naphthoic acid with one or more of the following monomers: 4-hydroxybenzoic acid; 4,4'-biphenol; N-(4-hydroxyphenyl)acetamide; terephthalic acid; resorcinol; and isophthalic acid such that a minimum of 50 percent of the polymer units are derived from 6-hydroxy-2-naphthoic acid alone or in combination with 4-hydroxybenzoic acid, not more than 25 percent of the polymer units are derived individually from 4,4'biphenol, N-(4-hydroxyphenyl)acetamide and terephthalic acid, and not more than 15 percent of the polymer units are derived individually from resorcinol and isophthalic acid. | Ticona | As a basic polymer used in the production of articles (including non-PET bottles) intended to contact food. | Limitations/ Specifi- cations |
September 28, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Ticona | ||||||||||||||||||||||||||||||||
743 | Mixture of saturated linear aliphatic esters produced from C12 - C18 alcohols and C12 - C18 fatty acids. | Croda Chemicals Europe | As a friction reduction additive in polyethylene terephthalate (PET) resins used in the production of containers and packaging films that may contact food. | Limitations/ Specifi- cations |
October 2, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Croda Chemicals Europe | ||||||||||||||||||||||||||||||||
744 | 1,4-benzenedicarboxylic acid,1-4-dibutyl ester (CAS Reg. No. 1962-75-0). | Eastman Chemical Company | The FCS is intended for use as a plasticizer in polymers for use: 1) in adhesives that comply with 21 CFR 175.105, 2) in pressure sensitive adhesives that comply with 21 CFR 175.125, and 3) as a coating or component of paper or paperboard intended for use in contact with dry foods with no free surface fat or oil in compliance with 21 CFR 176.180. |
Limitations/ Specifi- cations |
October 12, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Eastman Chemical Company | ||||||||||||||||||||||||||||||||
745 | 1,4-Benzenedicarboxylic acid, dimethyl ester, polymer with 1,3-propanediol (CAS Reg. No. 36619-23-5) or 1,4-benzenedicarboxylic acid, polymer with 1,3-propanediol (CAS Reg. No. 26590-75-0). | E. I. du Pont de Nemours and Co., Inc. | As a component in the manufacture of articles, except bottles, intended to contact food. | Limitations/ Specifi- cations |
September 29, 2007 | EA/FONSI | ||||||||||||||||||||||||||
E. I. du Pont de Nemours and Co., Inc. | ||||||||||||||||||||||||||||||||
746 | 2-propen-1-ol, reaction products with 1,1,1,2,2,3,3,4,4,5,5,6,6-tridecafluoro-6-iodohexane, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine (CAS Reg. No. 464178-94-7) as manufactured in accordance with the description in the FCN. | Hercules Incorporated | As an oil/grease resistant sizing agent employed prior to the sheet forming operation and/or at the size press in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
October 4, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Hercules Incorporated | ||||||||||||||||||||||||||||||||
748 | 1H-benz[de]isoquinoline-1,3(2H)-dione, 2-[2,6-bis(1-methylethyl)phenyl]-6-[4-(1,1,3,3-tetramethylbutyl)phenoxy] (CAS Reg. No. 852282-89-4). | BASF Aktiengesellschaft | The FCS is intended for use as a UV absorber in polyethylene terephthalate (PET) polymers complying with 21 CFR 177.1630. | Limitations/ Specifi- cations |
October 11, 2007 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
749 | Acetic acid ethenyl ester, polymer with ethene and 1,1'-(1-ethenyl-1,2-ethanediyl) diacetate, hydrolyzed (CAS Reg. No. 917249-65-1). | The Nippon Synthetic Chemical Industry Co., Ltd. | For use as a component of food-contact articles. | Limitations/ Specifi- cations |
October 16, 2007 | EA/FONSI | ||||||||||||||||||||||||||
The Nippon Synthetic Chemical Industry Co., Ltd. | ||||||||||||||||||||||||||||||||
750 | Octadecanoic acid, 1-(12-acetyloxy)-, 2,3-bis(acetyloxy) propyl ester; 1-(12-acetoxystearoyl)- 2,3-diacetyl glycerol (CAS Reg. No. 736150-63-3). | Danisco A/S | For use as: 1. a plasticizer at levels up to 34 percent by weight in polyvinylchloride bottle cap sealing rings for use in contact with all foods under Conditions of Use B through H, as described in Table 2; 2. a plasticizer at levels up to 3 percent by weight in polymers used to manufacture articles intended for repeated-use in contact with all foods under Conditions of Use E through H, as described in Table 2; and, 3. a colorant carrier or dispersant at levels up to 0.5 percent by weight in polymers used to manufacture articles intended for repeated-use in contact with all foods. |
Limitations/ Specifi- cations |
October 18, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Danisco A/S | ||||||||||||||||||||||||||||||||
751 | 2-propenoic acid, homopolymer, sodium salt (with a weight average molecular weight of 2300 to 5700 Daltons and a weight average molecular weight to number average molecular weight ratio of not more than 6.3) (CAS Reg. No. 9003-04-7). | Alco Chemical | To control the formation of mineral scale during evaporation of beet or cane sugar juice. | Limitations/ Specifi- cations |
October 26, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Alco Chemical | ||||||||||||||||||||||||||||||||
752 | Formaldehyde, polymer with 1-naphthalenol (CAS Reg. No. 25359-91-5). | Akzo Nobel Polymer Chemicals LLC | For use only as an antiscaling or release agent, applied on the internal parts of reactors employed in the production of ethylene-vinyl chloride food-contact copolymers. | Limitations/ Specifi- cations |
November 13, 2007 | EA/FONSI | ||||||||||||||||||||||||||
Akzo Nobel Polymer Chemicals LLC | ||||||||||||||||||||||||||||||||
757 | Hydrogenated polymers prepared from one or more of the following: 1-hexene (CAS Reg. No. 592-41-6), 1-octene (CAS Reg. No. l11-66-0), 1-decene (CAS Reg. No. 872-05-9), 1-dodecene (CAS Reg. No. 112-41-4), and 1-tetradecene (CAS Reg. No. 1120-36-1). | ExxonMobil Chemical Company | 1) As an additive in pressure-sensitive adhesives that comply with 21 CFR 175.125. 2) As an additive in propylene homopolymers and copolymers complying with 21 CFR 177.1520(c) or that are the subject of an effective food contact notification. |
Limitations/ Specifi- cations |
November 30, 2007 | EA/FONSI | ||||||||||||||||||||||||||
ExxonMobil Chemical Company | ||||||||||||||||||||||||||||||||
758 | 1-Dodecene, reaction products with naphthalene (CAS Reg. No. 939823-19-5). | King Industries | As a component of lubricants with incidental food contact in repeat use applications. | Limitations/ Specifi- cations |
December 1, 2007 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
King Industries | ||||||||||||||||||||||||||||||||
759 | C16-18 fatty acid esters of a branched C20 alcohol as described in the notification. | International Specialty Products | As a lubricant/release agent in the manufacture of repeat-use, food-contact polycarbonate. | Limitations/ Specifi- cations |
December 7, 2007 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
International Specialty Products | ||||||||||||||||||||||||||||||||
762 | Boron nitride (CAS Reg. No. 10043-11-5). | Acheson Industries Inc. | For use as a lubricant on bakery oven chains with incidental food contact. | Limitations/ Specifi- cations |
December 25, 2007 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Acheson Industries Inc. | ||||||||||||||||||||||||||||||||
765 | Anthra[2",1",9":4,5,6;6",5",10":4',5',6']diisoquino[2,1-a:2',1'-a']diperimidine-12,25-dione (CAS Reg. No. 6859-32-1) and Phenanthro[2",1",10":4,5,6,7",8",9":4',5',6']diisoquino[2,1-a:2',1'-a']diperimidine-8,13-dione (CAS Reg. No. 41635-87-4). | BASF Aktiengesellschaft | To be used as a colorant in films, bottles, or tubes that may store food made of low-density polyethylene, high-density polyethylene, polyethylene terephthalate, acrylonitrile-butadiene-styrene terpolymer, polypropylene, polycarbonate, polystyrene, and nylon resins. | Limitations/ Specifi- cations |
March 20, 2008 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft, Germany/BASF Corporation, USA | ||||||||||||||||||||||||||||||||
766 | Polyester-urethane adhesive formulated from: 1) Polyester-urethanediol resins described in 21 CFR 177.1390(c)(2)(iv)(a). In addition, 2,2-bis(hydroxymethyl) butanoic acid (CAS Reg. No. 10097-02-6) may be used as an optional polyhydric alcohol, and 2,2-dimethyl-1,3-propanediol (CAS Reg. No. 126-30-7) may be used as a polyhydric alcohol in structures that are intended to contact alcoholic foods containing up to 8 percent ethyl alcohol. 2) Urethane cross-linking agent consisting of 1,3-butanediol reaction products with 1,6-diisocyanatohexane (CAS Reg. No. 187852-79-5). |
Nippon Polyurethane Industry Co., Ltd. | The FCS will be used as an adhesive in laminate structures that are intended for use at retort temperatures. | Limitations/ Specifi- cations |
April 4, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Nippon Polyurethane Industry Co., Ltd. | ||||||||||||||||||||||||||||||||
767 | Tris(2,4-di-tert-butylphenyl)phosphite (CAS Reg. No. 31570-04-4). | Songwon International - Americas, Inc. | The FCS will be used as an antioxidant in the manufacture of olefin polymers complying with the provisions of 21 CFR 177.1520(c), items 3.2c, 3.4, and 3.6. | Limitations/ Specifi- cations |
January 11, 2008 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Songwon International - Americas, Inc. | ||||||||||||||||||||||||||||||||
768 | Octadecyl, 3,5-di-tert-butyl-4-hydroxyhydrocinnamate (CAS Reg. No. 2082-79-3). | Songwon International - Americas, Inc. | As an antioxidant for olefin polymers. | Limitations/ Specifi- cations |
January 11, 2008 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Songwon International - Americas, Inc. | ||||||||||||||||||||||||||||||||
769 | N,N'-bis(phenylmethyl)hexanediamide (CAS Reg. No. 25344-24-5) used in conjunction with cobalt neodecanoate (CAS Reg. No. 27253-31-2). | Constar International, Inc. | As a modifier of ethylene phthalate/naphthalate polymers and copolymers excluding those modified with organic anhydrides. | Limitations/ Specifi- cations |
January 15, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Constar International, Inc. | ||||||||||||||||||||||||||||||||
770 | 1,4-bis(2-ethylhexyl) benzenedicarboxylate (CAS Reg. No. 6422-86-2). | Eastman Chemical Company | (1) At a level not to exceed 35 percent by weight of finished plasticized vinyl chloride polymer
formulations used in repeated-use food contact applications at temperatures no greater than
100oC; (2) As a component of a paper or paperboard, or coatings for such paper and paperboard intended for use in contact with dry foods with no free surface fats or oil in compliance with 21 CFR 176.180 Components of Paper and paperboard in contact with dry food; (3) As a component of adhesives complying with the provisions of 21 CFR 175.105 Adhesives; and, (4) As a component of pressure sensitive adhesives complying with the provisions of 21 CFR 175.125 Pressure-sensitive adhesives. |
Limitations/ Specifi- cations |
January 12, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Eastman Chemical Company | ||||||||||||||||||||||||||||||||
771 | The FCS is a mixture of 3,6-di-p-tolyl-2,5-dihydro-pyrrolo[3,4-c]pyrrole-1,4-dione (88.6 percent), 3-p-octadecyloxyphenyl-6-p-tolyl-2,5-dihydro-pyrrolo[3,4-c]pyrrole-1,4-dione (11.1 percent), and 3,6-di-p-octadecyloxyphenyl-2,5-dihydro-pyrrolo[3,4-c]pyrrole-1,4-dione (0.3 percent). | Ciba Specialty Chemicals Corporation | For use as a colorant in all food-contact polymers. | Limitations/ Specifi- cations |
March 6, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Ciba Specialty Chemicals Corporation | ||||||||||||||||||||||||||||||||
772 | A mixture of one or more of tripropylene glycol diacrylate (CAS Reg. No. 42978-66-5), trimethylolpropane triacrylate (CAS Reg. No. 15625-89-5), trimethylolpropane ethoxylate triacrylate (CAS Reg. No. 28961-43-5), and bisphenol A diglycidyl ether diacrylate (CAS Reg. No. 4687-94-9, 53814-24-7, 55127-80-5, 55818-57-0 or 37625-93-7), and optionally the difunctional alpha-hydroxy ketone described in the notification as a photoinitiator. The mixture will be cured by either ultraviolet (UV) or electron beam (EB) irradiation. | Alcan Packaging, Alcoa, Inc., Amgraph Packaging, Inc., Ashland Specialty Chemical Company, Bayer Polymers LLC, Bostik-Findley, Bryce Corporation, Coating and Adhesives Corporation, Cognis Corporation, Crown Cork & Seal, Cytec Industries, Dart Container, Dixie Packaging, Energy Sciences Inc., Fujihunt, Fusion UV Systems, Inc., Gidue SpA, Graphic Packaging Inc., H.B Fuller Company, INX International Ink Co., Lamberti, s.p.a., Liofol, MeadWestvaco, Nordson Corporation, Petroferm Inc., Pliant Corporation, PPG Industries, Inc., Printpack Inc., Rahn USA Corporation, Rock-Tenn Company, Rohm and Haas Company, Sartomer Company, Sealed Air, Siegwerk Group, Valspar Corporation | To be used as coatings (including inks) or components of coatings (including inks) on polymeric substrates, paper and paperboard, metal substrates, or as a component in adhesives. | Limitations/ Specifi- cations |
March 8, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Alcan Packaging, Alcoa, Inc., Amgraph Packaging, Inc., Ashland Specialty Chemical Company, Bayer Polymers LLC, Bostik-Findley, Bryce Corporation, Coating and Adhesives Corporation, Cognis Corporation, Crown Cork & Seal, Cytec Industries, Dart Container, Dixie Packaging, Energy Sciences Inc., Fujihunt, Fusion UV Systems, Inc., Gidue SpA, Graphic Packaging Inc., H.B Fuller Company, INX International Ink Co., Lamberti, s.p.a., Liofol, MeadWestvaco, Nordson Corporation, Petroferm Inc., Pliant Corporation, PPG Industries, Inc., Printpack Inc., Rahn USA Corporation, Rock-Tenn Company, Rohm and Haas Company, Sartomer Company, Sealed Air, Siegwerk Group, Valspar Corporation | ||||||||||||||||||||||||||||||||
773 | Zeolite A (CAS Reg. No. 68989-22-0) in which silver and ammonium ions have been exchanged for sodium ions. | AgIon Technologies, Inc. | As an antimicrobial agent used to preserve food-contact polymers. | Limitations/ Specifi- cations |
January 22, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Sinanen Zeomic Company, Ltd. | ||||||||||||||||||||||||||||||||
774 | A copolymer of 1, 2-bis(triethoxysilyl)ethane (CAS Reg. No. 16068-37-4) and 3-aminopropyltriethoxysilane (CAS Reg. No. 919-30-2). | Chemetall GmbH | The FCS will be used as a coating applied to food contact metal substrates. | Limitations/ Specifi- cations |
January 25, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Chemetall GmbH | ||||||||||||||||||||||||||||||||
775 | 1,3-dibromo-5,5-dimethylhydantoin (DBDMH; CAS Reg. No. 77-48-5). | Albemarle Corporation | The FCS will be used as an antimicrobial in water supplied to ice machines to make ice intended for general use in the poultry processing industry. | Limitations/ Specifi- cations |
January 28, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Albemarle Corporation | ||||||||||||||||||||||||||||||||
776 | Formamide, N-ethenyl-, homopolymer, and formamide, N-ethenyl-, copolymer with ethenamine, hydrochloride or sulfate. | BASF Aktiengesellschaft | The FCS is a wet-strength agent, dry-strength agent, fixing agent, or retention aid, which is applied prior to the sheet-forming operation in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
April 4, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
778 | 2-Propenoic acid, 2-methyl, polymer with alpha-(2-methyl-1-oxo-2-propenyl)-omega-methoxypoly(oxy-1,2-ethanediyl) and 2-propenoic acid, graft, sodium salt (CAS Reg. No. 381686-36-8). | Coatex S.A.S. | For use as an adjuvant for coatings applied to food-contact paper and paperboard, as described in the notification. | Limitations/ Specifi- cations |
February 22, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Coatex S.A.S., Coatex Inc., Coatex B.V. | ||||||||||||||||||||||||||||||||
780 | 1,4-Benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, hexamethylene diisocyanate and not more than 1 percent by weight of the polyhydric
alcohol described in the notification. REPLACES FCN 372 |
BASF Aktiengesellschaft | As a polyester film and coating. | Limitations/ Specifi- cations |
February 26, 2008 | EA/FONSI | ||||||||||||||||||||||||||
BASF Aktiengesellschaft | ||||||||||||||||||||||||||||||||
783 | 2-propen-1-ol, reaction products with 1,l,1,2,2,3,3,4,4,5,5,6,6-tridecafluoro-6-iodohexane, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine (CAS Reg. No. 464178-94-7) as manufactured in accordance with the description in the FCN. | Hercules Incorporated | As an oil/grease resistant sizing agent employed either prior to the sheet forming operation and/or at the size press in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
March 6, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Hercules Incorporated | ||||||||||||||||||||||||||||||||
784 | Siloxanes and silicones, 3-[3-diethylmethylammonio)-2-hydroxypropoxyl] propyl Me, di-Me, chlorides (CAS Reg. No. 588707-20-4). | Siltech Corporation | As a component of emulsion-based defoamers that are used in the pulping of lignocellulosic materials that can be used in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
March 6, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Siltech Corporation | ||||||||||||||||||||||||||||||||
785 | Nylon MXD-6 (also known as hexanedioic acid, polymer with 1,3- benzenedimethanamine) (CAS Reg. No.25718-70-1) meeting the analytical specifications in 21 CFR 177.1500(b), item 10.2. | INVISTA S.à.r.l. Mitsubishi Gas Chemical Company Inc. |
The FCS will be used as a modifier for polyethylene terephthalate copolyesters described in Food Contact Notification No. 72 and Food Contact Notification No. 498. | Limitations/ Specifi- cations |
March 7, 2008 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
INVISTA S.à.r.l. Mitsubishi Gas Chemical Company Inc. |
||||||||||||||||||||||||||||||||
787 | An aqueous solution of sodium chlorite and chlorine dioxide containing no less than 50 parts per million and not more than 200 parts per million of available chlorine dioxide. | Bio-Cide International, Inc. | For use as a sanitizing solution on beverage containers. | Limitations/ Specifi- cations |
June 20, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Bio-Cide International, Inc. | ||||||||||||||||||||||||||||||||
788 | 2-n-octyl-4-isothiazolin-3-one (CAS Reg. No. 26530-20-1). | Thor GmbH, Germany | The FCS is intended for use as an antimicrobial active ingredient of industrial technical formulations for use in preserving polymeric latex emulsion products destined for use in the manufacture of paper and paperboard. | Limitations/ Specifi- cations |
March 14, 2008 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
Thor GmbH, Germany | ||||||||||||||||||||||||||||||||
790 | Sulfonic acids, C10-18-alkane, sodium salts (CAS Reg. No. 68037-49-0). | Goulston Technologies, Inc. | The FCS is to be used as an antifogging anchor agent in multi-layer polyolefin film structures for use in produce bags and for lid seals for formed trays, specifically for raw and fresh fruits and vegetables, and for lid seals where meats are packaged in formed trays. | Limitations/ Specifi- cations |
March 19, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Goulston Technologies, Inc. | ||||||||||||||||||||||||||||||||
792 | 1,3-dibromo-5,5-dimethylhydantoin (DBDMH; CAS Reg. No. 77-48-5). | Albemarle Corporation | The FCS will be used as an antimicrobial in water applied to beef hides, carcasses, heads, trim, parts, and organs. | Limitations/ Specifi- cations |
March 26, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Albemarle Corporation | ||||||||||||||||||||||||||||||||
793 | 1,5-Pentanedicarboxylic acid, calcium salt (CAS Reg. No. 19455-79-9). | Borealis Polyolefine GmbH | The FCS will be used as a nucleating agent in the manufacture of polypropylene food-contact articles. | Limitations/ Specifi- cations |
April 1, 2008 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
ISOCHEM SA/Borealis Polyolefine GmbH | ||||||||||||||||||||||||||||||||
794 | Industrial starch modified by treatment with greater than 5 percent and not more than 21 percent by weight 2,3-epoxypropyltrimethylammonium chloride (CAS Reg. No. 3033-77-0). | National Starch and Chemical Company | For use as a retention aid and/or drainage aid and/or dry-strength agent employed prior to the sheet forming operation in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
April 10, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
National Starch and Chemical Company | ||||||||||||||||||||||||||||||||
798 | 12H-Phthaloperin-12-one, 8,9,10, 11-tetrachloro- (CAS Reg. No. 20749-68-2). | Ciba Corporation | As a colorant for use in polyethylene terephthalate polymers complying with 12 CFR 177.1630. | Limitations/ Specifi- cations |
April 19, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Modern Chemical Corporation Limited | ||||||||||||||||||||||||||||||||
799 | [S,S]-Ethylenediaminedisuccinic acid, trisodium salt (CAS Reg. No. 178949-82-1). | Innospec Limited | As a chelating agent in the manufacture of food-contact paper and paperboard. | Limitations/ Specifi- cations |
April 25, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Innospec Limited | ||||||||||||||||||||||||||||||||
800 | Formamide, N-ethenyl-, homopolymer, hydrolyzed, N-(3-carboxy-1-oxopropyl)N-[2-hydroxy-3-(trimethylammonio)-propyl] derivatives, chlorides (CAS Reg. No. 945630-11-5). | Hercules Inc. | As a strengthening agent, fixing agent, or retention aid employed prior to the sheet forming operation in the manufacture of paper and paperboard that will be used in contact with all food types under all conditions of use. | Limitations/ Specifi- cations |
May 1, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Hercules Inc. | ||||||||||||||||||||||||||||||||
801 | Peroxyacetic acid (CAS Reg. No. 79-21-0), solution containing 1-hydroxyethylidene-1,1-diphosphonic acid (CAS Reg. No. 2809-21-4). | FMC Corporation | The FCS will be used to treat food-contact surfaces of plastic containers and their enclosures to attain commercial sterility at least equivalent to that attainable by thermal processing for metal containers as provided for in 21 CFR Part 113 or as an antimicrobial on packaging for any acidic food. The peroxyacetic acid PAA solutions will contain equilibrium concentrations of peroxyacetic acid, hydrogen peroxide (CAS Reg. No. 7722-84-l), acetic acid (CAS Reg. No. 64-19-7), 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP), and water. | Limitations/ Specifi- cations |
May 1, 2008 | EA/FONSI | ||||||||||||||||||||||||||
FMC Corporation | ||||||||||||||||||||||||||||||||
802 | Benzoic acid, 2-hydroxy-, monosodium salt (CAS Reg. No. 54-21-7). | FMC Corporation | As a component of an adjuvant solution mixed with a peroxyacetic acid solution intended for use in treating food-contact surfaces of polymeric food containers to reduce or eliminate microbial contamination. | Limitations/ Specifi- cations |
May 1, 2008 | EA/FONSI | ||||||||||||||||||||||||||
FMC Corporation | ||||||||||||||||||||||||||||||||
804 | Trimethylolpropane (CAS Reg. No. 77-99-6). | E. I. du Pont de Nemours and Company, Inc. | As a milling aid and dispersant for titanium dioxide used as a light stabilizer in food contact articles. | Limitations/ Specifi- cations |
May 18, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
E. I. du Pont de Nemours and Company, Inc. | ||||||||||||||||||||||||||||||||
805 | Carboxylic acids, C5-9, hexaesters with dipentaerythritol (CAS Reg. No. 67762-52-1). | Inolex Chemical Company | As a lubricant with incidental food contact. | Limitations/ Specifi- cations |
June 4, 2008 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Inolex Chemical Company | ||||||||||||||||||||||||||||||||
806 | Ethylene/1-butene copolymer (CAS Reg. No. 25087-34-7). | Mitsui Chemicals, Inc. | As a component of articles used in contact with all types of food. | Limitations/ Specifi- cations |
June 4, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Mitsui Chemicals, Inc. | ||||||||||||||||||||||||||||||||
807 | Mixture of sodium chlorite (CAS Reg. No. 7758-19-2) and sodium chloride (CAS Reg. No. 7647-14-5). | Xyrex Ltd. | As an antimicrobial agent in water and ice that are used to rinse, wash, thaw, transport, or store seafood in accordance with current industry standards of good manufacturing practice. | Limitations/ Specifi- cations |
June 5, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Xyrex Ltd. | ||||||||||||||||||||||||||||||||
808 | D-Glucitol, bis-O-[(4-methylphenyl)methylene)- (CAS Reg. No. 54686-97-4). | New Japan Chemical Company Ltd. | The FCS is to be used as a nucleating agent in food contact articles, specifically, single use film wrap and bottle caps and repeat use food trays and containers. | Limitations/ Specifi- cations |
July 26, 2008 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
New Japan Chemical Company Ltd. | ||||||||||||||||||||||||||||||||
810 | 2-Bromo-2-nitro-1,3-propanediol (CAS Reg. No. 52-51-7). | GE Betz | As a preservative for boiler water additive formulations. | Limitations/ Specifi- cations |
June 11, 2008 | CAT. EXCL. 21 CFR 25.32(q) |
||||||||||||||||||||||||||
GE Betz | ||||||||||||||||||||||||||||||||
812 | Octadecanoic acid, 1 -( 12-acetyloxy)-, 2,3-bis(acetyloxy) propyl ester; 1 -( 12-acetoxystearoy1)- 2,3-diacetyl glycerol (CAS Reg. No. 736150-63-3). | Danisco A/S | As a colorant carrier/dispersant for use in polymeric food packaging articles, e.g. beverage bottles, molded storage containers, etc. | Limitations/ Specifi- cations |
June 19, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Danisco A/S | ||||||||||||||||||||||||||||||||
813 | Urea, N,N"-1,3-propanediylbis[N'-octadecyl-] (CAS Registry No. 35674-65-8). | BYK-Chemie GmbH | As a component in defoamer formulations to be used in food-contact coatings. | Limitations/ Specifi- cations |
June 27, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
BYK-Chemie GmbH | ||||||||||||||||||||||||||||||||
814 | Tris(2,4-di-tert-butylphenyl)phosphite (CAS Reg. No. 31570-04-4). | Rich Yu Chemical | As an antioxidant in olefin copolymers complying with 21 CFR 177.1520(c), items 3.2c, 3.4, or 3.6, or in styrene block copolymers complying with 21 CFR 177.1810. | Limitations/ Specifi- cations |
July 2, 2008 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Rich Yu Chemical | ||||||||||||||||||||||||||||||||
815 | β-Alanine, N-(2-aminoethyl)-, monosodium salt, polymer with 1,4-butanediol, 1,6-diisocyanatohexane, 1,3-diisocyanatomethylbenzene and hexanedioic acid (CAS Reg. No. 141073-56-5). | BASF SE | The FCS is a polyurethane coating which is used as an adhesive applied on plastics, films, paper and paperboard, and metal or coated metal used for packaging and holding all food types intended for single- and repeat-use articles. | Limitations/ Specifi- cations |
August 14, 2008 | EA/FONSI | ||||||||||||||||||||||||||
BASF SE | ||||||||||||||||||||||||||||||||
816 | Carbamodithioic acid, dibutyl-, methylene ester (CAS Reg. No. 10254-57-6). | R.T. Vanderbilt Company, Inc. | The FCS is for use as an antioxidant for lubricants with incidental food contact. | Limitations/ Specifi- cations |
July 29, 2008 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
R.T. Vanderbilt Company, Inc. | ||||||||||||||||||||||||||||||||
817 | Hexanedioic acid, polymer with 1,3-benzenedimethanamine (CAS Reg. No. 25718-70-1) meeting the analytical specifications in 21 CFR 177.1500(b), item 10.2, and used in conjunction with cobalt neodecanoate (CAS Reg. No. 27253-31-2). | Gruppo Mossi & Ghisolfi | The FCS will be used as a modifier of ethylene phthalate polymers regulated under 21 CFR 177.1630 and ethylene phthalate polymers that are the subject of an effective FCN, including those modified with 1,3-benzenedicarboxylic acid, 5-sulfo-, monolithium salt according to FCN 546. | Limitations/ Specifi- cations |
July 29, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Gruppo Mossi & Ghisolfi M&G Polymers USA, LLC |
||||||||||||||||||||||||||||||||
818 | Titanium nitride (CAS Reg. No. 25583-20-4). REPLACES FCN #716 |
ColorMatrix Group Inc. | As an additive in food-contact polyethylene terephthalate (PET) bottles. | Limitations/ Specifi- cations |
July 29, 2008 | EA/FONSI | ||||||||||||||||||||||||||
ColorMatrix Group Inc. | ||||||||||||||||||||||||||||||||
820 | 2-Propenoic acid, 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl ester, polymer with alpha-(1-oxo-2- propen-1-yl)-omega-hydroxypoly(oxy-1,2-ethanediyl). | Daikin America, Inc. | For use as an oil or grease resistant treatment for paper and paperboard intended for food-contact use. | Limitations/ Specifi- cations |
July 31, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Daikin America, Inc. | ||||||||||||||||||||||||||||||||
821 | Styrene block polymer with 1,3-butadiene, hydrogenated (CAS Reg. No. 66070-58-4). | Asahi Kasei Chemicals Corporation | As a modifier of propylene polymers and copolymers for use in contact with food. | Limitations/ Specifi- cations |
August 6, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Asahi Kasei Chemicals Corporation | ||||||||||||||||||||||||||||||||
822 | 1-Tetradecene reaction products with Naphthalene (CAS Reg. No. 132983-41-6). | King Industries | The FCS is to be used as a component of lubricants with incidental food contact in repeat use applications. | Limitations/ Specifi- cations |
August 14, 2008 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
King Industries | ||||||||||||||||||||||||||||||||
823 | Chromium Nitride (CAS Reg. No. 24094-93-7). | Phygen Coatings, Inc. | The FCS will be used as a component of surface coating on repeat-use food processing and food packaging equipment to prevent abrasive wear to the components of the equipment. | Limitations/ Specifi- cations |
August 20, 2008 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
Phygen Coatings, Inc. | ||||||||||||||||||||||||||||||||
824 | N-[3,5-Bis-(2,2-dimethyl-propionylamino)-phenyl]-2,2-dimethyl-propionamide (CAS Reg. No. 745070-61-5). | Ciba Corporation | For use as a clarifier for polypropylene (PP) homo- and copolymers used in food-packaging materials. | Limitations/ Specifi- cations |
September 11, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Ciba Corporation | ||||||||||||||||||||||||||||||||
825 | Nonitol, 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]- (CAS Reg. No. 882073-43-0). | Milliken Chemical, a Division of Milliken and Company | For use as a clarifying agent in polypropylene homopolymer and high-propylene olefin copolymers. | Limitations/ Specifi- cations |
August 28, 2008 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Milliken Chemical, a Division of Milliken and Company | ||||||||||||||||||||||||||||||||
826 | Siloxanes and Silicones, di-Me vinyl, hydroxy-terminated, reaction products with trimethoxy[3-(oxiranylmethoxy)propyl]silane (CAS Reg. No. 102782-94-5). | Dow Corning Corporation | The FCS is intended for use as an anchor agent in silicone release coatings that are currently regulated for food contact applications. | Limitations/ Specifi- cations |
September 3, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Dow Corning Corporation | ||||||||||||||||||||||||||||||||
827 | 2-propenoic acid, 2-hydroxyethyl ester, polymer with α-(l-oxo-2-propen-l-yl)-ω-hydroxypoly(oxy-l,2-ethanediyl), α-(1-oxo-2-propen-l-yl)-ω-[(l-oxo-2-propen-l-yl)oxy]poly(oxy-l,2-ethanediyl) and 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-propenoate (CAS Reg. No. 1012783-70-8). | Daikin America, Inc. | As an oil and grease resistant treatment for paper and paperboard employed at the size press. | Limitations/ Specifi- cations |
September 9, 2008 | CAT. EXCL. 21 CFR 25.32(i) |
||||||||||||||||||||||||||
Daikin America, Inc. | ||||||||||||||||||||||||||||||||
828 | 1,3:2,4-di-O-(p-chlorobenzylidene)-D-sorbitol (CAS Reg. No. 82203-23-4). | GCH Technology Company Ltd. | As a nucleating/clarifying agent. | Limitations/ Specifi- cations |
September 27, 2008 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
GCH Technology Company Ltd. | ||||||||||||||||||||||||||||||||
829 | Tris(2,4-di-tert-butylphenyl)phosphite (CAS Reg. No. 31570-04-4) | Albemarle Corporation | As an antioxidant/stabilizer in olefin copolymers complying with 21 CFR 177.1520(c), items 3.2c, 3.4, or 3.6, or in styrene block copolymers complying with 21 CFR 177.1810. | Limitations/ Specifi- cations |
October 8, 2008 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Albemarle Corporation | ||||||||||||||||||||||||||||||||
830 | Octadecyl 3,5-di-tert-butyl-4-hydroxyhydrocinnamate (CAS Reg. No. 2082-79-3). | Albemarle Corporation | As a stabilizer for flexible polyvinyl chloride (PVC) and as an antioxidant for olefin polymers. | Limitations/ Specifi- cations |
October 8, 2008 | CAT. EXCL. 21 CFR 25.32(i) and (j) |
||||||||||||||||||||||||||
Albemarle Corporation | ||||||||||||||||||||||||||||||||
831 | Poly (tetramethylene terephthalate) (CAS Reg. No. 24968-12-5). | SABIC Innovative Plastics | As a polymer for making repeat-use food contact articles. | Limitations/ Specifi- cations |
October 15, 2008 | CAT. EXCL. 21 CFR 25.32(j) |
||||||||||||||||||||||||||
SABIC Innovative Plastics | ||||||||||||||||||||||||||||||||
832 | Propylene-ethylene copolymers (CAS Reg. No. 9010-79-1). | ExxonMobil Chemical Company | As a component of articles used in contact with all types of food. | Limitations/ Specifi- cations |
October 21, 2008 | EA/FONSI | ||||||||||||||||||||||||||
ExxonMobil Chemical Company and its stewarded affiliates around the world. | ||||||||||||||||||||||||||||||||
834 | 1,4-Butanediol dimethacrylate (CAS Reg. No. 2082-81-7). | FCS: Evonik Röhm GmbH Polymer made with the FCS: SABIC Petrochemical B.V. |
As a component of a coating on articles used in contact with food. | Limitations/ Specifi- cations |
October 29, 2008 | EA/FONSI | ||||||||||||||||||||||||||
FCS: Evonik Röhm GmbH Polymer made with the FCS: SABIC Petrochemical B.V. |
||||||||||||||||||||||||||||||||
835 | 1,2-Benzisothiazolin-3-one (CAS Reg. No. 2634-33-5). | Lanxess Corporation | As a biocide in uncured liquid rubber latex used to manufacture repeat-use rubber gloves intended for use in contact with all types of food. | Limitations/ Specifi- cations |
December 26, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Lanxess Corporation | ||||||||||||||||||||||||||||||||
836 | Polycyclooctene (CAS Reg. No. 25267-51-0). | Kuraray Company, Ltd. | As a component of a non food-contact layer of multilayered food-contact articles at levels up to 10 percent in blends with polyolefins complying with 21 CFR 177.1520 or ethylene-vinyl acetate-vinyl alcohol copolymers complying with 21 CFR 177.1360. | Limitations/ Specifi- cations |
November 12, 2008 | CAT. EXCL. 21 CFR 25.32(i) | ||||||||||||||||||||||||||
Kuraray Company, Ltd. | ||||||||||||||||||||||||||||||||
837 | Benzenesulfonic acid, 2,2'-(1,2-ethenediyl)bis(5-(4-(bis(2-hydroxyethyl)amino)-6-((4-sulfophenyl)amino)-1,3,5-triazin-2-yl)amino)-, tetrasodium salt (CAS Reg. No. 16470-24-9). | Sun Rise Chemical Ind. Co., Ltd. (Taiwan) | The FCS is intended for use as an optical brightener in paper and paperboard complying with 21 CFR 176.170. | Limitations/ Specifi- cations |
November 12, 2008 | CAT. EXCL. 21 CFR 25.32(i) | ||||||||||||||||||||||||||
Sun Rise Chemical Ind. Co., Ltd. (Taiwan); Sun Rise Chemical Ind. Co. (China) | ||||||||||||||||||||||||||||||||
839 | Dodecanoic acid, 12-amino-, polymer with ethene,2,5-furandione, α-hydro-ω-hydroxypoly (oxy-1,2-ethanediyl) and 1-propene (CAS Reg. No. 287916-86-3). | Toyota Tsusho Corporation | As an antistatic agent in polymer films, compliant with existing authorizations. | Limitations/ Specifi- cations |
November 21, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Sanyo Chemical Industries, Ltd. | ||||||||||||||||||||||||||||||||
843 | Propylene/ethylene copolymers (CAS Reg. No. 9010-79-1) polymerized in the presence of propylene homopolymer (CAS Reg. No. 9003-07-0) complying with 21 CFR 177.1520(c) Item 1.1, to produce an inseparable blend of the two polymers. | The Dow Chemical Company | As a basic polymer used in the production of articles intended to contact food. | Limitations/ Specifi- cations |
December 3, 2008 | EA/FONSI | ||||||||||||||||||||||||||
The Dow Chemical Company | ||||||||||||||||||||||||||||||||
844 | Copolyester of 1,4-benzene dicarboxylic acid polymer with 1,4-butanediol, (E)-2-butenedioic acid, 1,2-ethanediol, and 1,6-hexanedioic acid grafted with styrene-maleate copolymer. | Toyobo Co., Ltd. | As an adhesion aid for Nylon 6 and Nylon 6 modified with Nylon MXD-6. | Limitations/ Specifi- cations |
December 3, 2008 | CAT. EXCL. 21 CFR 25.32(i) | ||||||||||||||||||||||||||
Toyobo Co., Ltd. | ||||||||||||||||||||||||||||||||
845 | Styrene/butadiene copolymers (CAS Reg. No., exclusive of minor monomers, is 9003-55-8), produced by copolymerizing styrene and butadiene with one or more of the monomers methacrylic acid, 2-hydroxyethyl acrylate, itaconic acid, acrylic acid, fumaric acid, N-methylol methacrylamide, and methacrylamide, such that the total of methacrylic acid, 2-hydroxyethyl acrylate, itaconic acid, acrylic acid, and fumaric acid does not exceed 10 percent by weight, and the methacrylamide and N-methylol methacrylamide do not exceed 2 percent and 3 percent by weight, respectively. | OMNOVA Solutions, Inc. | For use as a latex binder in paper and paperboard complying with 21 CFR 176.170 and 176.180, at levels not to exceed 20 percent by weight of the paper or paperboard. | Limitations/ Specifi- cations |
December 10, 2008 | EA/FONSI | ||||||||||||||||||||||||||
OMNOVA Solutions, Inc. | ||||||||||||||||||||||||||||||||
846 | 1,2-Benzisothiazolin-3-one (CAS Reg. No. 2634-33-5). | The Dow Chemical Company | As a biocide in uncured liquid rubber latex used to manufacture repeat-use rubber gloves intended for use in contact with all types of food. | Limitations/ Specifi- cations |
January 10, 2009 | EA/FONSI | ||||||||||||||||||||||||||
The Dow Chemical Company | ||||||||||||||||||||||||||||||||
847 | Nylon MXD-6 (also known as hexanedioic acid, polymer with 1,3-benzenedimethanamine) meeting the analytical specifications in 21 CFR 177.1500(b), item 10.2 and used in conjunction with cobalt stearate (CAS Reg. No. 13586-84-0). | INVISTA S.à.r.l. Mitsubishi Gas Chemical Company Inc. |
The FCS will be used as a modifier for polyethylene terephthalate copolyesters as described in Food-Contact Notification No. 72 and Food-Contact Notification No. 498. | Limitations/ Specifi- cations |
December 16, 2008 | CAT. EXCL. 21 CFR 25.32(i) and (j) | ||||||||||||||||||||||||||
INVISTA S.à.r.l. Mitsubishi Gas Chemical Company Inc. | ||||||||||||||||||||||||||||||||
850 | 1,3-butadiene, 2-methyl-, homopolymer, of cis-1,4-configuration, cyclized (CAS Reg. No. 68441-13-4). | Zeon Corporation | To be used as a modifier in food contact materials fabricated from ethylene-vinyl acetate-vinyl alcohol copolymer (EVOH), complying with 21 CFR 177.1360(a)(3). | Limitations/ Specifi- cations |
December 31, 2008 | EA/FONSI | ||||||||||||||||||||||||||
Zeon Corporation | ||||||||||||||||||||||||||||||||
851 | Hexanedioic acid, polymer with 1,3-benzenedimethanamine (CAS Reg. No. 25718-70-1). | Gruppo Mossi & Ghisolfi | The FCS will be used as a modifier of ethylene phthalate polymers regulated under 21 CFR 177.1630 and ethylene phthalate polymers that are the subject of an effective FCN, including those modified with 1,3-benzenedicarboxylic acid, 5-sulfo-, monolithium salt according to FCN 546. | Limitations/ Specifi- cations |
January 8, 2009 | EA/FONSI | ||||||||||||||||||||||||||
Gruppo Mossi & Ghisolfi M&G Polymers USA, LLC | ||||||||||||||||||||||||||||||||
852 | A copolymer of hydroquinone, terephthalic acid, 2,6-naphthalenedicarboxylic acid, 4- hydroxybenzoic acid, and optionally 4,4'-biphenol. | E.I. du Pont de Nemours and Company | For use in the manufacture of repeat-use, food-contact articles. | Limitations/ Specifi- cations |
January 14, 2009 | CAT. EXCL. 21 CFR 25.32(j) | ||||||||||||||||||||||||||
E.I. du Pont de Nemours and Company | ||||||||||||||||||||||||||||||||
853 | Copolymer of styrene (CAS Reg. No. 100-42-5), methyl methacrylate (CAS Reg. No. 80-62-6), and glycidyl methacrylate (CAS Reg. No. 106-91-2). | BASF SE | As a polymeric chain extender in the manufacture of polyesters, complying with the existing authorizations. | Limitations/ Specifi- cations |
January 20, 2009 | EA/FONSI | ||||||||||||||||||||||||||
BASF SE | ||||||||||||||||||||||||||||||||
860 | N,N',N''-Tris(2-methylcyclohexyl)-1,2,3-propanetricarboxamide (CAS Reg. No. 160535-46-6). | New Japan Chemical Co., Ltd. | As a clarifier/nucleator for polypropylene homo- and copolymers. | Limitations/ Specifi- cations |
January 30, 2009 | CAT. EXCL. 21 CFR 25.32(i) and (j) | ||||||||||||||||||||||||||
New Japan Chemical Co., Ltd. | ||||||||||||||||||||||||||||||||
861 | Tridecanol phosphite condensation product with butylidenebis(2-(1,1-dimethylethyl)-5- methyl-4,1-phenylene) (CAS Reg. No. 13003-12-8). | Dover Chemical Corporation | As an antioxidant and/or stabilizer for styrene/isoprene/styrene (SIS), high impact polystyrene (HIPS), styrene/butadiene, impact methacrylic styrene, acrylonitrile/butadiene, and acrylonitrile/butadiene/styrene (ABS) copolymers intended for contact with food. | Limitations/ Specifi- cations |
January 30, 2009 | CAT. EXCL. 21 CFR 25.32(i) and (j) | ||||||||||||||||||||||||||
Dover Chemical Corporation |