 |
|
 |
Home Page > Executive Branch > Code of Federal Regulations > Electronic Code of Federal Regulations
e-CFR Data is current as of November 3, 2008
TITLE 40--Protection of Environment
CHAPTER I--ENVIRONMENTAL PROTECTION AGENCY
SUBCHAPTER I--SOLID WASTES
PART 267--STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE FACILITIES OPERATING UNDER A STANDARDIZED PERMIT
Subpart A--GENERAL
|
| What are the purpose, scope and applicability of this part? |
|
|
| What is the relationship to interim status standards? |
|
|
| How does this part affect an imminent hazard action? |
|
Subpart B--GENERAL FACILITY STANDARDS
|
| Does this subpart apply to me? |
|
|
| What must I do to comply with this subpart? |
|
|
| How do I obtain an identification number? |
|
|
| What are my waste analysis requirements? |
|
|
| What are my security requirements? |
|
|
| What are my general inspection requirements? |
|
|
| What training must my employees have? |
|
|
| What are the requirements for managing ignitable, reactive, or incompatible wastes? |
|
|
| What are the standards for selecting the location of my facility? |
|
Subpart C--PREPAREDNESS AND PREVENTION
|
| Does this subpart apply to me? |
|
|
| What are the general design and operation standards? |
|
|
| What equipment am I required to have? |
|
|
| What are the testing and maintenance requirements for the equipment? |
|
|
| When must personnel have access to communication equipment or an alarm system? |
|
|
| How do I ensure access for personnel and equipment during emergencies? |
|
|
| What arrangements must I make with local authorities for emergencies? |
|
Subpart D--CONTINGENCY PLAN AND EMERGENCY PROCEDURES
|
| Does this subpart apply to me? |
|
|
| What is the purpose of the contingency plan and how do I use it? |
|
|
| What must be in the contingency plan? |
|
|
| Who must have copies of the contingency plan? |
|
|
| When must I amend the contingency plan? |
|
|
| What is the role of the emergency coordinator? |
|
|
| What are the required emergency procedures for the emergency coordinator? |
|
|
| What must the emergency coordinator do after an emergency? |
|
|
| What notification and recordkeeping must I do after an emergency? |
|
Subpart E--RECORDKEEPING, REPORTING, AND NOTIFYING
|
| Does this subpart apply to me? |
|
|
| Use of the manifest system. |
|
|
| What information must I keep? |
|
|
| What reports must I prepare and to whom do I send them? |
|
|
| What notifications must I make? |
|
Subpart F--RELEASES FROM SOLID WASTE MANAGEMENT UNITS
|
| Who must comply with this section? |
|
|
| What must I do to address corrective action for solid waste management units? |
|
Subpart G--CLOSURE
|
| Does this subpart apply to me? |
|
|
| What general standards must I meet when I stop operating the unit? |
|
|
| What procedures must I follow? |
|
|
| Will the public have the opportunity to comment on the plan? |
|
|
| After I stop operating, how long until I must close? |
|
|
| What must I do with contaminated equipment, structure, and soils? |
|
|
| How do I certify closure? |
|
Subpart H--FINANCIAL REQUIREMENTS
|
| Who must comply with this subpart, and briefly, what do they have to do? |
|
|
| Definitions of terms as used in this subpart. |
|
|
| Cost estimate for closure. |
|
|
| Financial assurance for closure. |
|
|
| Incapacity of owners or operators, guarantors, or financial institutions. |
|
|
| State assumption of responsibility. |
|
|
| Wording of the instruments. |
|
Subpart I--USE AND MANAGEMENT OF CONTAINERS
|
| Does this subpart apply to me? |
|
|
| What standards apply to the containers? |
|
|
| What are the inspection requirements? |
|
|
| What standards apply to the container storage areas? |
|
|
| What special requirements must I meet for ignitable or reactive waste? |
|
|
| What special requirements must I meet for incompatible wastes? |
|
|
| What must I do when I want to stop using the containers? |
|
|
| What air emission standards apply? |
|
Subpart J--TANK SYSTEMS
|
| Does this subpart apply to me? |
|
|
| What are the required design and construction standards for new tank systems or components? |
|
|
| What handling and inspection procedures must I follow during installation of new tank systems? |
|
|
| What installation requirements must I follow? |
|
|
| What are the secondary containment requirements? |
|
|
| What are the required devices for secondary containment and what are their design, operating and installation requirements? |
|
|
| What are the requirements for ancillary equipment? |
|
|
| What are the general operating requirements for my tank systems? |
|
|
| What inspection requirements must I meet? |
|
|
| What must I do in case of a leak or a spill? |
|
|
| What must I do when I stop operating the tank system? |
|
|
| What special requirements must I meet for ignitable or reactive wastes? |
|
|
| What special requirements must I meet for incompatible wastes? |
|
|
| What air emission standards apply? |
|
Subparts K THROUGH CC--[RESERVED]
Subpart DD--CONTAINMENT BUILDINGS
|
| Does this subpart apply to me? |
|
|
| What design and operating standards must my containment building meet? |
|
|
| What other requirements must I meet to prevent releases? |
|
|
| What additional design and operating standards apply if liquids will be in my containment building? |
|
|
| How may I obtain a waiver from secondary containment requirements? |
|
|
| What do I do if my containment building contains areas both with and without secondary containment? |
|
|
| What do I do if I detect a release? |
|
|
| Can a containment building itself be considered secondary containment? |
|
|
| What must I do when I stop operating the containment building? |
|
February 27, 2007< !-- #EndDate -- >-->
|
