Abbott
OSHA and Abbott are committed to providing the health care industry and others, including small
businesses, with information, guidance, and access to training resources that will help them protect
employees' health and safety. The Alliance particularly addresses ergonomics, emergency preparedness
and the business value of safety and health management system programs in the workplace.
To meet the outreach and communication goals of the Alliance:
- On August 9, 2006, Mike Connors, Regional Administrator, Region V, USDOL-OSHA presented "The
Business Case for Safety – A Joint Venture of OSHA, Abbott & Georgetown University" at the On-site
Consultation Training Conference in Dallas, Texas.
- Mike Connors, Regional Administrator, Region V, USDOL-OSHA presented "The Business Case for
Safety: Adding Value and Competitive Advantage" at the following conferences and meetings on:
- April 28, 2006, The Business of Small Business III: Making the Case for Safety and Health in
Washington, D.C.
- November 3, 2005, Honda Conference in Cincinnati, Ohio.
- October 25, 2005, Chicago Joint Safety Days in Chicago, Illinois.
- September 29, 2005, Ohio Manufacturing Association Meeting in Columbus, Ohio.
- September 20, 2005, XVII World Congress on Safety and Health at Work in Orlando, Florida.
- On March 1, 2006, Mike Connors, Regional Administrator, Region V, USDOL-OSHA presented "The
Business Case for Safety" at the Winter Occupational Safety and Health State Plan Association in San
Diego, California.
- On January 13, 2006, Mike Connors, Regional Administrator, Region V, USDOL-OSHA and Jim Murphy,
Director, Crisis Management, Emergency Preparedness & Business Continuity, Abbott presented "A Look
at the Corporate – Academic Partnership: The Abbott Case Studies" at Alliance Program participant,
Georgetown University's McDonough School of Business's Center for Business and Public Policy's
seminar "Engaging Tomorrow's Leaders in Safety and Health: The Case Study Approach" in Washington,
D.C.
- On March 7, 2005, the National Manufacturers' Week Conference was held in Chicago, Illinois. Lee
Anne Jillings, Director, Office of Outreach Services and Alliances, Directorate of Cooperative and
State Programs, USDOL-OSHA; Howie Eberts, Assistant Regional Administrator, Region V, USDOL-OSHA;
and Jim Murphy, Director, Global Crisis Management and Business Continuity Planning, Abbott
presented "OSHA: An Overview of What's New and Working for You," highlighting the OSHA and Abbott
Alliance and the case studies developed by the Alliance for business school curricula. Lee Anne
Jillings and Jim Murphy also presented "Cooperative Programs: The OSHA that Works for You" informing
attendees about OSHA's cooperative programs and highlighting the OSHA and Abbott Alliance as a
successful example.
- On June 14-18, 2004, at the 2004 OSHA Compliance Assistance Training Sessions in Falls Church,
Virginia, Jim Murphy, Director, Global Crisis Management and Business Continuity Planning, Abbott,
and Mike Conners, Regional Administrator, Region V, USDOL-OSHA presented "The Business Case for
Safety-Adding Value and Competitive Edge," describing case studies showing the effect of safety
programs on the "bottom line" in the stadium construction, nursing home, and auto parts
manufacturing industries.
- Mike Connors, Regional Administrator, Region V, USDOL-OSHA; Dana Root, Ergonomist, Region V,
USDOL-OSHA; and Bob Leonard, Industrial Hygienist, Region V, USDOL-OSHA spoke at the "Strategies for
Safety and Success in Long Term Care" on:
- November 3, 2004, in Wheaton, Illinois.
- October 19, 2004, in Decatur, Illinois.
- On September 16, 2003, the 54th Annual Illinois Health Care Association (IHCA) Convention and
Trade Show was held in Springfield, Illinois. Mike Connors, Regional Administrator, Region V,
USDOL-OSHA made a presentation on safety for healthcare workers; Bob Leonard, Industrial Hygienist,
Region V, USDOL- OSHA updated the attendees on OSHA's inspection focus and latest OSHA standards for
nursing homes; and Kim Kohls, Nursing Home Administrator, Countryside Care Center, provided examples
of "Zero-Lift" programs that nursing homes have implemented quickly and at a relatively low cost.
- Abbott representatives serve on the editorial board of the Motor Vehicle Safety Safety and Health
Topics page on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and health:
- In March 2005, OSHA and Abbott published case studies that can be incorporated into business
school curricula to communicate the business value and competitive advantage of an effective safety
and health program. Working with another Alliance participant, the Center for Business and Public
Policy of the McDonough School of Business, Georgetown University, the case studies address
ergonomics, auto parts manufacturing, offshore manufacturing plants, exposure limits, stadium
construction, and fleet safety. These case studies are available on the OSHA Web site.
-- As of February 2007.
Back to Top
ADSC: International Association of Foundation Drilling
The OSHA and International Association of Foundation Drilling (ADSC) Alliance
focuses on providing the Association's members and others in the foundation drilling industry,
including small businesses and non-English or limited English speaking employees, with information,
guidance and access to training resources to help them protect employees' health and safety. In
particular, the Alliance addresses safety and health issues including, fall protection, silica,
pinch-point and equipment operation hazards.
To meet the training and education goals of the Alliance:
- On April 29, 2006, Mike Talmont, Assistant Area Director, Region VI, Ft. Worth, Texas
Area Office, USDOL-OSHA, and Rick Marshall, Chairman, ADSC Safety Committee, gave the OSHA 10-Hour
Construction Outreach Training Program at the ADSC South Central Chapter Meeting in Irving, Texas.
- On May 7, 2005, Danezza Quintero, Occupational Safety and Health Specialist, Office of
Construction Services, Directorate of Construction, USDOL-OSHA and Rick Marshall, Chairman, ADSC
Safety Committee gave the OSHA 10-Hour Construction Outreach Training Program at the ADSC
Mid-Atlantic Chapter Meeting in McLean, Virginia.
To meet the outreach and communication goals of the Alliance:
- On January 31-February 3, 2007, Jess McCluer, then Program Analyst, Office of Outreach Services
and Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA and Mylene Kellerman and
Patrick Stark, Florida On-site Consultation Program staffed an Alliance Program exhibit booth at
the ADSC Equipment Expo '07 & Conference in Orlando, Florida.
- On December 18, 2006, Rick Marshall, Chairman, ADSC Safety Committee, gave the Drilled Shaft
Installation Safety Presentation, which was developed through the Alliance, to staff from OSHA
Region V, Indiana OSHA and the Indiana On-site Consultation Program in Indianapolis, Indiana.
- On December 6, 2006, Rick Marshall, Chairman, ADSC Safety Committee and T. Michael Toole,
Construction Institute – American Society of Civil Engineers, an Alliance Program participant,
gave the Design for Safety slide presentation at the ASCE and National Council for Geo-Engineering
and Construction Workshop, "Trends Affecting the Geo-Community: What Does the Future Hold?" in
Reston, Virginia. The slide presentation was developed through the Alliance Program Construction
Roundtable Design for Safety Workgroup.
- On November 16-17, 2006, through the Alliance, three representatives from California OSHA
attended the ADSC Anchored Earth Retention Seminar in Oakland, California.
- On November 6-9, 2005, Jess McCluer, then Program Analyst, Office of Outreach Services and
Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA and Stephen Boyd, Deborah
Coler, Jorge Delucca, Nancy Thai, Jack Rector and Dutch Haverrman, OSHA Region VI, Dallas, Texas
Area Office, USDOL-OSHA staffed an Alliance Program exhibit booth at Geo³ Comprehensive Quality
Assurance/Quality Control Technical Conference and Interactive Field Day and Exhibition in Dallas,
Texas. On April 30, 2005, Jess McCluer, then Program Analyst, Office of Outreach Services and
Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA updated attendees on the
activities of the ADSC Alliance at the ADSC Board of Directors Meeting in Dallas, Texas.
- Through the Alliance, ADSC developed the following tips sheets which were posted on ADSC's Web
site and linked to from the OSHA and ADSC Alliance Web page on the OSHA Web site:
- "Drilled Shaft Installation Safety Tips For the Employer" (February 2006)
- "Drilled Shaft Installation Safety Tips For the Employee" (February 2006)
- "Anchored Earth Retention and Micropile Safety Tips For the Employer" (July 2006)
- "Anchored Earth Retention and Micropile Safety Tips For the Employee" (July 2006)
- Through the Alliance, ADSC developed the following best practices fact sheets which were posted
on ADSC's Web site and linked to from the OSHA and ADSC Alliance Web page on the OSHA Web site:
- "Working Safely During Installation of Anchored Earth Retention and Micropiles" (July 2006)
- "Working Safely During Installation of Drilled Shaft Foundations" (July 2006)
- Through the Alliance, ADSC developed a Drilled Shaft Installation Safety slide presentation
which was posted on ADSC's Web site in February 2006 and linked to from the OSHA and ADSC Alliance
Web page on the OSHA Web site.
- Through the Alliance, ADSC has published many articles about the Alliance Program in ADSC
E-newsletter, its monthly electronic publication, and Foundation Drilling,
its bi-monthly publication. In addition, National Driller, the publication
of the foundation drilling industry, has published articles about the OSHA and ADSC Alliance.
- Through the following three OSHA Regional and Area Office Alliances, the Agency works with ADSC
to reduce fall, silica, pinch-point and equipment operation hazards:
- Region X Regional Office and ADSC's West Coast Chapter, signed October 21, 2005;
- Region VI Regional Office and ADSC's South Central Chapter, signed February 10, 2006;
- Region VIII Denver and Englewood Area Offices and ADSC's Rocky Mountain Chapter, signed
February 1, 2008.
- ADSC members serve on the editorial boards for the following Safety and Health Topics pages on
the OSHA Web site: Construction - Motor Vehicle Safety; Construction - Noise and Hearing
Conservation; Construction - Personal Protective Equipment; Construction - Trenching and
Excavation; Crane, Derrick, and Hoist Safety; Fall Protection; Hand and Power Tools; Lead; Silica,
Crystalline; and Welding, Cutting, and Brazing;
To meet the goals of promoting the national dialogue on workplace safety and
health:
- On January 30, 2008, ADSC participated in the second Alliance Program Construction Roundtable
in Washington, D.C. During the meeting, Alliance Program participants discussed products developed
through the Roundtable and identified potential projects and compliance assistance resources to
help address safety and health hazards in the construction industry.
- On July 8, 2004, ADSC participated in the Alliance Program's Construction Roundtable, in
Washington, D.C. During the meeting, construction-related Alliance Program participants discussed
working together on Alliance-related projects for the construction industry. ADSC representatives
are participating in the Roundtable's Fall Protection and Design for Safety Workgroups.
--As of June 2008.
Back to Top
Altec Industries, Inc.
The OSHA and Altec Industries, Inc. Alliance focuses on providing information, guidance and access
to training resources to help protect employees' health and safety, including non-English or
limited-English speakers. In particular, the Alliance addresses the safe operation of cranes, digger
derricks and insulated and non-insulated aerial devices including tree care devices as well as
industry hazards such as falls and electrocutions.
To meet the outreach and communication goals of the Alliance:
- Through the Alliance, Altec conducted "Safe Operation of Insulated Aerial Devices Training" for
OSHA Regional and Area Office staff and other safety and health professionals. Over 100 attendees
have participated in the seminar, which was held on:
- October 12, 2006 in Boise, Idaho.
- October 18, 2006 in Portland, Oregon.
- October 19, 2006 in Portland, Oregon.
- November 14, 2006 in Atlanta, Georgia.
- November 15, 2006 in Jacksonville, Florida.
- November 16, 2006 in Birmingham, Alabama.
- November 29, 2006 in Oshkosh, Wisconsin.
- May 3, 2007 in Toledo, Ohio.
- Altec representatives serve on the editorial boards for the Aerial Devices; Crane, Derrick and
Hoist Safety; Electrical Power Generation, Transmission and Distribution Industry; and Tree Care
Industry Safety and Health Topics pages on the OSHA Web site.
--As of July 2007.
Back to Top
American Association of Occupational Health Nurses, Inc.
OSHA and the American Association of Occupational Health Nurses (AAOHN) are
working together to provide AAOHN members and others, including large and small businesses, with
information, guidance, and access to training resources particularly in addressing workplace hazard
preparedness and security issues, such as workplace violence, musculoskeletal disorders, bloodborne
pathogens and personal protective equipment.
To meet the training and education goals of the Alliance:
- Through the Alliance, an Emergency Management/Hazard Communication slide presentation,
"Planning for the Worst Case Scenario: What You Need to Know About All Hazard Preparedness," was
developed by AAOHN and distributed by OSHA and AAOHN to the Association's Chapters and the
Agency's Compliance Assistance Specialists for use in training.
- Through the Alliance, a slide presentation, "Violence Prevention at Work: What Employers Need
to Know," was developed by AAOHN and distributed by OSHA and AAOHN to the Association's Chapters
and the Agency's Compliance Assistance Specialists for use in training.
To meet the outreach and communication goals of the Alliance:
- On November 8, 2007, Sheila Arbury, Health Scientist, Office of Occupational Health Nursing,
Directorate of Science, Technology and Medicine, USDOL-OSHA and Dionne Williams, Team Leader,
Office of Health Enforcement, Directorate of Enforcement Programs, USDOL-OSHA presented
information on OSHA's bloodborne pathogen standard during "Bloodborne Pathogens – What You Need
to Know to Prevent Disease Transmission in the Workplace" Occupational Hazards
Web cast.
- On April 17-19, 2007, Sandra Khan, Occupational Safety and Health Specialist, Office of
Outreach Services and Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA
staffed an Alliance Program exhibit booth during the AAOHN 2007 Symposium and Expo in Orlando,
Florida.
- AAOHN supported OSHA's 2007 Teen Worker Job Safety Campaign by posting information on its Web
site and in its newsletter, ProHealth Alert.
- On May 8-10, 2006, the AAOHN 2006 Symposium and Expo was held in Albuquerque, New Mexico. On
May 10, 2006, Elise Handelman, Director, Office of Occupational Nursing, Directorate of Science,
Technology and Medicine, USDOL-OSHA presented "AED/CPR and OSHA Compliance: What the new
guidelines mean to you." Edward Cosgrove, Industrial Hygienist, Region VI, Lubbock, Texas Area
Office, USDOL-OSHA; Thomas C. Nystel, Industrial Hygienist, Region VI, Lubbock, Texas Area
Office, USDOL-OSHA and Hal Eitzen, Safety Consultant, New Mexico State, Consultation Program
staffed an Alliance Program exhibit booth.
- On May 5, 2005, David Ferkul, Certified Industrial Hygienist, Workplace Safety Consultation,
Minnesota Department of Labor gave a presentation on OSHA's cooperative programs at the AAOHN
2005 Symposium and Expo in Minneapolis, Minnesota.
- On April 29-May 6, 2005, David Ferkul and Jolyn Crum, Industrial Hygienists, Workplace Safety
Consultation, Minnesota Department of Labor and Sandra Khan, Occupational Safety and Health
Specialist, Office of Outreach Services and Alliances, Directorate of Cooperative and State
Programs, USDOL-OSHA staffed an Alliance Program exhibit booth during the AAOHN 2005 Symposium
and Expo in Minneapolis, Minnesota.
- On April 30 - May 7, 2004, Dan Corcoran, Compliance Assistant Specialist, Region VII, Wichita,
Kansas Area Office, USDOL-OSHA staffed an Alliance Program exhibit booth at the American
Occupational Health Conference in Kansas City, Missouri.
- On January 27, 2004, Nancy Menzel, M.D., representing the AAOHN, presented "Stress and Pain
Management: Intervention for Back Pain" at the National Advisory Committee on Ergonomics (NACE)
Research Symposium in Washington, D.C.
- On May 7, 2003, John Henshaw, former-Assistant Secretary, USDOL-OSHA made the keynote
presentation at the American Occupational Health Conference in Atlanta, Georgia.
- Through the Alliance, AAOHN provided OSHA with input during the development of the Agency's
"First Receivers Guidance Document," "Fact Sheet on Workplace Emergencies" and "TB: A Guide for
Prevention and Control Among Workers in Correctional Facilities" which are posted on the OSHA Web
site.
- AAOHN representatives serve on the editorial boards for the Automated External Defibrillators
(AEDs), Bloodborne Pathogens and Needlestick Prevention, Medical Screening and Surveillance,
Occupational Health Professionals, Tuberculosis, and Workplace Violence Health and Safety Topics
pages on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and
health:
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to the OSHA and
Alliance Program participants and other safety and health professionals during the 2007 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. AAOHN, along with a
number of other Alliance Program participants, supported the Week.
-- As of January 2008.
Back to Top
American Biological Safety Association
Through the OSHA and American Biological Safety Association (ABSA) Alliance,
the organizations are using their collective expertise both to enhance workplace health and safety
and to assist employers, including small businesses, in developing a preventive focus for biological
safety issues facing the American workplace.
To meet the training and education goals of the Alliance:
- On October 7–10, 2007, the 50th Annual Biological Safety Conference was held in Nashville,
Tennessee. On October 7, 2007, Melody Sands, Director, Office of Health Enforcement, Directorate
of Enforcement Programs, USDOL-OSHA; Dionne Williams, then Team Leader, Office of Health
Enforcement, Directorate of Enforcement Programs, USDOL-OSHA; and Karen Heckmann, Industrial
Hygienist, Office of Training and Education, Directorate of Training and Education, USDOL-OSHA
presented the professional development course, "Introduction to OSHA for Biosafety
Professionals."
- On October 15–18, 2006, the 49th Annual Biological Safety Conference was held in Boston,
Massachusetts. On October 15, 2006, Melody Sands, Director, Office of Health Enforcement,
Directorate of Enforcement Programs, USDOL-OSHA; Dionne Williams, then Team Leader, Office of
Health Enforcement, Directorate of Enforcement Programs, USDOL-OSHA; and Karen Heckmann,
Industrial Hygienist, Office of Training and Education, Directorate of Training and Education,
USDOL-OSHA presented the professional development course, "Introduction to OSHA for Biosafety
Professionals."
- On October 2-6, 2006, Dionne Williams, then Team Leader, Office of Health Enforcement,
Directorate of Enforcement Programs, USDOL-OSHA and John Keene, Diane Fleming and Barbara
Johnson, ABSA presented the OSHA training course, "Essentials of Biosafety: Assessment and
Strategies," to OSHA Compliance Safety and Health Officers in Bethesda, Maryland.
- On October 23-26, 2005, the 48th Annual Biological Safety Conference was held in Vancouver,
British Columbia, Canada. On October 23, 2005, Melody Sands, Director, Office of Health
Enforcement, Directorate of Enforcement Programs, USDOL-OSHA; Dionne Williams, then Industrial
Hygienist, Office of Health Enforcement, Directorate of Enforcement Programs, USDOL-OSHA; and
Karen Heckmann, Industrial Hygienist, OSHA Training Institute, USDOL-OSHA presented the
professional development course, "Introduction to OSHA for Biosafety Professionals."
To meet the outreach and communication goals of the Alliance:
- On October 7–10, 2007, the 50th Annual Biological Safety Conference was held in Nashville,
Tennessee. On October 8, 2007, Dionne Williams, then Team Leader, Office of Health Enforcement,
Directorate of Enforcement Programs, USDOL-OSHA presented "OSHA Protection: Past, Present, and
Future OSHA Efforts Concerning Workers." Dionne Williams, then Team Leader, Office of Health
Enforcement, Directorate of Enforcement Programs, USDOL-OSHA staffed an Alliance Program exhibit
booth.
- On October 15–18, 2006, the 49th Annual Biological Safety Conference was held in Boston,
Massachusetts. On October 15, 2006, Dionne Williams, then Team Leader, Office of Health
Enforcement, Directorate of Enforcement Programs, USDOL-OSHA presented "OSHA Protection: Past,
Present, and Future OSHA Efforts Concerning Workers." Dionne Williams, then Industrial Hygienist,
Office of Health Enforcement, Directorate of Enforcement Programs, USDOL-OSHA staffed an Alliance
Program exhibit booth.
- On October 23-26, 2005, the 48th Annual Biological Safety Conference was held in Vancouver,
British Columbia, Canada. Dionne Williams, then Industrial Hygienist, Office of Health
Enforcement, Directorate of Enforcement Programs, USDOL-OSHA staffed an Alliance Program exhibit
booth.
- On October 17-20, 2004, the 47th Annual Biological Safety Conference was held in San Antonio,
Texas. On October 17, 2004, Melody Sands, Director, Office of Health Enforcement, Directorate of
Enforcement Programs, USDOL-OSHA presented "TB, Bloodborne Pathogens and More." Dionne Williams,
then Industrial Hygienist, Office of Health Enforcement, Directorate of Enforcement Programs,
USDOL-OSHA and John Beck, OSHA Region VI, Austin, Texas, Area Office, USDOL-OSHA staffed an
Alliance Program exhibit booth.
- On October 12-15, 2003, the 46th Annual Biological Safety Conference was held in Philadelphia,
Pennsylvania. On October 13, 2003, Bob Curtis, then Division Director, Salt Lake Technical Center,
USDOL-OSHA and David Ippolito, then Director, Office of Science and Technological Assessment,
Directorate of Science, Technology and Medicine, USDOL-OSHA and representatives of the U.S. Postal
Service presented "Improving Responses To Bioterrorism: Lessons Learned From The Anthrax Attacks."
- On June 14-18, 2004, ABSA had an exhibit at the 2004 OSHA Compliance Assistance Training
Sessions in Falls Church, Virginia.
- On June 12, 2003, Debra Hunt, Assistant Professor/Chemistry, Director, Biological Safety
Division, Office of Occupational and Environmental Safety, Department of Community and Family
Medicine, Duke University, representing ABSA, presented "The Elements of a Biosafety Program" at
the 2nd Annual OSHA Compliance Assistance Conference in Vienna, Virginia.
- Through the Alliance, ABSA developed the fact sheets, "Principles of Biosafety" and "Biosafety
Levels," which were posted on the ABSA Web site in March 2008 and linked to from the ABSA and OSHA
Alliance Web page on the OSHA Web site.
- Through the Alliance, ABSA developed a fact sheet, "Rescue and Recovery: Hygiene Practices for
Workers," which was posted on the ABSA Web site in October 2005 and linked to from the OSHA and
ABSA Alliance Web page on the OSHA Web site.
- Through the Alliance, in 2003 ABSA published "OSHA Infectious Dose White Paper" in
Applied Biosafety, the Journal of the American Biological Safety Association,
Volume 8, Number 4.
- ASBA representatives serve on the editorial boards for the following Safety and Health Topics
pages on the OSHA Web site: Anthrax, Avian Flu, Biological Agents, Bloodborne Pathogens and
Needlestick Prevention, Botulism, Foodborne Disease, Hantavirus, Hazardous Waste, Indoor Air
Quality, Ionizing Radiation, Legionnaires' Disease, Mold and Fungi, Plague, Ricin, Smallpox,
Tularemia, and Viral Hemorrhagic Fevers.
- ABSA representatives serve on the editorial boards for the following eTools on the OSHA Web
site: Legionnaires' Disease and Hospital.
Promoting the national dialogue on workplace safety and health:
- On May 5, 2008, Deputy Assistant Secretary Donald Shalhoub, USDOL-OSHA spoke to OSHA staff,
Alliance Program participants and other safety and health professionals during the 2008 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. The theme for the 2008
NAOSH Week was "Safety is Good Business." The ABSA Alliance, along with a number of other Alliance
Program participants, supported the Week.
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to OSHA staff,
Alliance Program participants and other safety and health professionals during the 2007 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. ABSA along with a number
of other Alliance Program participants supported the Week.
-- As of June 2008.
Back to Top
American Dental Association
Through the Alliance, OSHA and the American Dental Association (ADA) are using
their collective expertise to help foster a culture of prevention while sharing technical knowledge
in the area of ergonomics and promoting safe and healthful working conditions for dental employees.
To meet the outreach and communication goals of the Alliance:
- On August 16, 2007, Dana L. Root, Ergonomist, Region V, Chicago, Illinois, USDOL-OSHA presented
"Ergonomics for the Front Office Staff" at the American Dental Association Conference on Dentist
Health and Wellness in Chicago, Illinois.
- On May 4, 2006, Elizabeth Sherfy, then Program Analyst, Office of Outreach Services and
Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA gave an update on the OSHA
Alliance Program and the OSHA and ADA Alliance to the American Dental Association Council on
Dental Practice in Chicago, Illinois.
- ADA added ergonomics information, including information on the OSHA and ADA Alliance and the
Alliance Program, to the handouts and materials distributed to ADA members and others in the
dental profession at ADA's Success Practice Management Seminars. To date, the seminar has been
presented at 22 dental schools.
- On October 6, 2005, Lee Anne Jillings, Director, Office of Outreach Services and Alliances,
Directorate of Cooperative and State Programs, USDOL-OSHA participated during a workshop, "The
Ergonomics of High Productivity" and presented "OSHA's Alliance Program: The Impact of Ergonomics
in the Workplace" at the 146th ADA Annual Session in Philadelphia, Pennsylvania.
- ADA created and posted a page on its Web site that provides information about the OSHA and ADA
Alliance.
- Through the Alliance, ADA developed "Ergo Tips--Hand Pain" which was posted in August 2006 on
the ADA Web site and linked to from the OSHA and ADA Alliance Web page on the OSHA Web site
- ADA representatives reviewed and provided OSHA with input during the Agency's development of
its Compliance Assistance QuickStart Healthcare Industry Module that was posted on the OSHA Web
site.
- ADA representatives serve on the editorial boards for the Dentistry and Bloodborne Pathogens
and Needlestick Prevention Safety and Health Topics pages on the OSHA Web site.
--As of October 2007.
Back to Top
American Forest and Paper Association/Pulp and Paper Safety Association
The OSHA and American Forest and Paper Association (AF&PA)/Pulp and Paper Safety Association (PPSA)
Alliance works to provide the members of the organizations and others in the forest, pulp, paper,
and paper-converting industries with information, guidance and access to training resources to help
them protect employees' health and safety, particularly in addressing workplace ergonomics issues.
To meet the outreach and communication goals of the Alliance:
- On November 2-3, 2006, Alan Angle, Compliance Safety and Health Officer, Region V, Madison,
Wisconsin Area Office, USDOL-OSHA attended PPSA's ergonomics seminar, "Practical Ergonomics Training
for Printing and Converting Operations in the Pulp and Paper Industry," in Indianapolis, Indiana.
- On October 26, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA gave a presentation
about the OSHA and AF&PA/PPSA Alliance and related OSHA policies at the AF&PA's Safety and Health
Group meeting in Washington, D.C.
- Through the Alliance, OSHA and AF&PA/PPSA developed the following ergonomics success stories for
the pulp and paper industries, which are posted on OSHA's Web site on the Ergonomics Safety and
Health Topics page and linked to from the OSHA and AF&PA/PPSA Alliance Web page:
- "Success with Ergonomics: Transporting Cutting Dies with Hand Truck."
- "Success with Ergonomics: Rotary Die Cut Stacker Operations."
- "Success with Ergonomics: Installing LP Tank on Forklift with Hoist."
- On June 13, 2006, Chris Weber, Safety Manager, Temple-Inland Inc. gave a presentation on the OSHA
and AF&PA/PPSA Alliance at the AF&PA's Safety and Health Conference in Orlando, Florida.
- May 1-4, 2006, the OSHA 30-Hour Occupational Safety and Health Standards for General Industry
course was presented in St. Louis, Missouri. On May 1, 2006, Frank Cordier, Corporate Manager,
Safety and Health Compliance, Smurfit-Stone Container Corporation gave a presentation on the OSHA
and AF&PA/PPSA Alliance to the course's attendees.
- AF&PA and PPSA representatives serve on the editorial boards for the Control of Hazardous Energy
(Lockout/Tagout); Machine Guarding; Pulp, Paper, and Paperboard Mills; and Sawmills; Wood Products
Industry; and Wood Dust Safety and Health Topics pages on the OSHA Web site.
--As of July 2007.
Back to Top
American Foundry Society
Through the Alliance, OSHA and the American Foundry Society (AFS) provide AFS
members and others, including small businesses in the metal casting industry, with information,
guidance, and access to training resources to help them protect employees' health and safety.
To meet the outreach and communication goals of the Alliance:
- On October 8, 2007, Jan Cothron, Industrial Hygiene Manager, Tennessee Department of Labor and
Workforce Development participated on a panel, "AFS/OSHA Alliance Update . . . Top Compliance
Issues Found in Foundries," during the 19th AFS Environmental, Health and Safety Conference in
Nashville, Tennessee.
- On October 8, 2007, Scott Frosch, Senior Industrial Hygienist, Indiana Department of Labor
Occupational Safety and Health Administration made a presentation about the safety and health
issues that impact the foundry industry at the AFS Central Indiana Chapter Meeting in
Indianapolis, Indiana.
- On May 15-18, 2007, Jeffrey C. Rucker, Safety and Health Manager, Region VI, Dallas, Texas
Regional Office, USDOL-OSHA and James J. Shelton, Compliance Assistance Specialist, Region VI,
Houston North, Texas Area Office, USDOL-OSHA staffed the Alliance Program exhibit booth at the
111th Metalcasting Congress in Houston, Texas.
- On February 1, 2007, AFS representatives participated in the Alliance Program's Small Business
Roundtable in Washington, DC. During the meeting, Alliance Program participants reviewed
promotional materials and tools that OSHA designed in response to the recommendations made during
the Roundtable meeting on September 8, 2006.
- On January 16, 2007, Nancy Newman, Assistant Area Director, Region V, Cleveland, Ohio Area
Office, USDOL-OSHA and Fred Kohloff, Director, Environment, Safety and Health, AFS; Jack Schuldt,
10-Q Committee, AFS discussed OSHA's Local Emphasis Program on Primary Metals and other issues
impacting the foundry industry in Ohio at the Ohio Cast Metal Association Meeting in Columbus,
Ohio.
- On September 17-20, 2006, representatives from the Tennessee Department of Labor and Workforce
Development staffed the Alliance Program exhibit booth during the 18th AFS Environmental Health
and Safety Conference in Nashville, Tennessee.
- On April 28, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA signed the OSHA and AFS
Alliance renewal agreement and updated attendees on the Alliance Program and activities of the
OSHA and AFS Alliance at the AFS' 2006 Government Affairs Conference in Washington, D.C.
- On April 18-21, 2006, OSHA representatives staffed the Alliance Program exhibit booth during
the 110th Metalcasting Congress in Columbus, Ohio.
- On February 16, 2006, Jan Cothron, Industrial Hygiene Manager, Tennessee Department of Labor
and Workforce Development and Sandy Bennett, Manager of Training, Tennessee OSHA presented "OSHA's
Silica Standard and Reducing/Preventing Exposure to Silica" at the AFS Southeast Regional
Conference in Nashville, Tennessee.
- On November 14-18, 2005 John Grzywacz and Terry Krug, Instructors, OSHA Training Institute
(OTI), USDOL-OSHA presented the OSHA and AFS Compliance Training Course at the AFS Headquarters in
Schaumburg, Illinois.
- On October 26, 2006, AFS representatives participated in the OSHA Alliance Program Hazard
Communication Roundtable's Promoting the Globally Harmonized System for Classification and
Labeling of Chemicals (GHS) Workgroup in Washington, D.C. Workgroup participants identified
compliance assistance tools and products to educate the public, particularly small businesses,
about the GHS. They also provided recommendations on the target audiences, subjects and formats of
and methods for distributing the information.
- On September 23, 2005, Kim Brightwell, Health Compliance Officer, Occupational Safety and
Health Division, North Carolina Department of Labor presented "OSHA's Silica Standard and
Reducing/Preventing Exposure to Silica" at the AFS Piedmont Chapter Meeting in Charlotte, North
Carolina.
- On August 22, 2005, Lee Anne Jillings, Director, Office of Outreach Services and Alliances,
Directorate of Cooperative and State Programs, USDOL-OSHA gave a presentation on the Alliance
Program and the activities of the OSHA and AFS Alliance during the 17th AFS Environmental Health
and Safety Conference in Dearborn, Michigan.
- On August 1, 2005, AFS representatives participated in the OSHA Alliance Program Hazard
Communication Roundtable's Promoting the Globally Harmonized System (GHS) for Classification and
Labeling of Chemicals Workgroup meeting in Washington, D.C. The workgroup identified a number of
compliance assistance tools that it could develop to support OSHA's plans to adopt the GHS as part
of its Hazard Communication Standard.
- On April 16-19, 2005, the Alliance Program exhibited during CastExpo '05 in St. Louis,
Missouri.
- On March 29-April 1, 2005, Frank Perrino and Anthony Towey, Instructors, OSHA Training
Institute (OTI), USDOL-OSHA and Jack Schuldt, 10-Q Safety and Health Committee, AFS provided the
OTI Foundry Training Course to OSHA staff members at the Ford Motor Company's Cleveland Casting
Plant in Cleveland, Ohio.
- On March 16, 2005, Jess McCluer, then Program Analyst, Office of Outreach Services and
Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA gave an update on the
Alliance Program and the activities of the AFS and OSHA Alliance at Safety in the Foundry XVII in
Providence, Rhode Island. In addition, John Grzywacz, Instructor, OSHA Training Institute (OTI),
USDOL-OSHA presented "Fundamental Hazards of Electricity."
- On March 11, 2005, former-Acting Assistant Secretary Jonathan L. Snare, USDOL-OSHA gave an update
on the Alliance Program and the activities of the AFS Alliance at the AFS' 2005 Government Affairs
Conference in Washington, D.C.
- On February 17, 2005, Ron Smay, Industrial Hygienist, Region III, Harrisburg, Pennsylvania Area
Office, USDOL-OSHA, presented "OSHA's Silica Standard and Reducing/Preventing Exposure to Silica"
at the AFS Chesapeake, Keystone, and Metropolitan Chapters and the Conestoga Foundry Association
and Pennsylvania Foundry Association meeting in York, Pennsylvania.
- On August 16, 2004, Ken Gilbert, Area Director, Region V, Indianapolis, Indiana Area Office,
USDOL-OSHA, gave a presentation on the Alliance Program and OSHA's enforcement activities at the
16th AFS Environmental Health and Safety Conference in Indianapolis. Representatives from the
National Office staffed an Alliance Program exhibit.
- Through the Alliance, AFS developed and published the "Guide for Selection and Use of Personal
Protective Equipment and Special Clothing for Foundry Operations" module of its Safety and Health
manual. The module was posted in November 2005 on the AFS Web site and linked to from the OSHA and
AFS Alliance Web page on the OSHA Web site.
- AFS members serve on the editorial board for Safety and Health Topics Pages for Powered
Industrial Trucks, Control of Hazardous Energy (Lockout/Tagout), Heat Stress, Lead, Silica,
Crystalline and Ventilation on the OSHA Web site.
-- As of October 2007.
Back to Top
American Heart Association
Through the Alliance, OSHA and the American Heart Association (AHA) work together to share best
practices and technical knowledge for reducing death and disability from heart disease and stroke in
the workplace.
To meet the outreach and communication goals of the Alliance:
-
On September 27, 2007, Alex Barbieri, Senior Case Manager, AHA gave a presentation on AHA's Start
Program, a wellness program for the workplace, at the Association of Occupational Health
Professionals, another Alliance Program participant, Congress of Presidents in Savannah, Georgia.
-
On June 6, 2007, AHA participated in the Department of Labor Safety Day in Washington D.C. AHA
representatives staffed an Alliance Program exhibit booth and provided safety and health
information.
-
On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA, spoke to the OSHA and Alliance
Program participants and other safety and health professionals during the 2007 North American
Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of Labor in
Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE), an Alliance
Program participant, and the Canadian Society of Safety Engineering, the Week focuses on the
importance of preventing injuries and illnesses in the workplace. AHA, along with a number of other
Alliance Program participants, supported the Week.
-
On October 4-7, 2006, AHA and California Division of Occupational Safety and Health (better known as
CAL OSHA) representatives shared an Alliance Program exhibit booth at the Association of
Occupational Health Professionals, another Alliance Program participant, Congress of Presidents in
Sacramento, California.
-
On June 22-25, 2006, Earl Hicks, Program Analyst, Office of Outreach Services and Alliances,
Directorate of Cooperative and State Programs, USDOL-OSHA; Tony Gilson, Industrial Hygienist, Region
V, Fairview Heights, Illinois District Office, USDOL-OSHA; Pat Stark, Safety and Health Compliance
Specialist, Florida On-site Consultation Program; William Tomlin, Safety and Health Compliance
Specialist, Florida On-site Consultation Program and AHA representatives, John Hayes and Toni Reel
staffed an Alliance Program exhibit booth at the CCPRF/ECCU 2006 International Educational
Conference in Lake Buena Vista, Florida.
-
On May 6, 2006, Don Wright, M.D., then Director, Office of Occupational Medicine, Directorate of
Science, Technology and Medicine, USDOL-OSHA and AHA representatives, William W. Hammill, M.D. and
Michael R. Sayre, M.D. presented "New Guidelines for First Aid, CPR and AEDs and OSHA Regulations"
at the American Occupational Health Conference in Los Angeles, California.
-
On May 10, 2006, Elise Handelman, Director, Office of Occupational Health Nursing, Directorate of
Science, Technology and Medicine, USDOL-OSHA and AHA representative, Diane Fendya, R.N. presented
"CPR/AED and OSHA Compliance: What the New Guidelines Mean to You" at the AAOHN 2006 Symposium and
Expo in Albuquerque, New Mexico.
-
On January 26, 2006, AHA representatives Michael R. Sayre, M.D. and Tom Zoch, M.D. presented
"American Heart Association New CPR and ECC Updated Guidelines" at the OSHA Journal Club in
Washington, D.C.
-
On August 8-9, 2005, AHA representatives provided the AHA CPR/AED Heart Saver Train-the-Trainer
course for OSHA staff members at the Department of Labor, Washington, D.C.
-
On September 30-October 3, 2004, the Emergency Cardiovascular Care Update (ECCU) was held in New
Orleans, Louisiana. On September 29, 2004, Paula O. White, Director, Directorate of Cooperative and
State Programs, USDOL-OSHA presented "Joining Forces to Expand our Reach: An OSHA Update" during the
Emergency Cardiovascular Care Pre-Session of the ECCU. Dorinda Folse, Compliance Assistance
Specialist, Region VI, Baton Rouge, Louisiana Area Office, USDOL-OSHA and Sandra Khan, Safety and
Occupational Health Specialist, Office of Outreach Services and Alliances, Directorate of
Cooperative and State Programs, USDOL-OSHA staffed an Alliance Program exhibit booth.
-
On July 13-15, 2004, AHA representatives provided the AHA CPR/AED Heartsaver Train-the-Trainer
Course to OSHA staff members at the OSHA Training Institute in Arlington Heights, Illinois.
-
On June 14-18, 2004, the AHA had an exhibit at the 2004 OSHA Compliance Assistance Training Sessions
in Falls Church, Virginia.
-
AHA shared two slide presentations, "Commit to Saving Lives, AED Programs--A Case for Support" and
"Commit to Saving Lives, Implementing AED Programs" with OSHA.
-
AHA representatives serve on the editorial boards for the Automated External Defibrillators (AEDs);
AEDs in the Workplace and Medical and First Aid Safety and Health Topics pages on the OSHA Web site.
-- As of January 2008.
Back to Top
American Industrial Hygiene Association
The OSHA and American Industrial Hygiene Association (AIHA) Alliance focuses
on reducing and preventing employee exposure to ergonomic hazards in the workplace by providing AIHA
members and others with information and guidance for developing, implementing, and/or improving
ergonomic programs.
To meet the outreach and communication goals of the Alliance:
- On August 1, 2006, AIHA published a new safety alert: Deadly Hydrogen Sulfide and Shipyard
Sewage that is posted on the AIHA Web site and linked to from the OSHA and AIHA Web page on the
OSHA Web site. It was developed through the OSHA and AIHA Alliance and in conjunction with OSHA's
maritime-industry related Alliances with the American Shipbuilding Association, the Shipbuilders
Council of America, and the National Shipbuilding Research Program.
- On May 13-18, 2006, AIHA's AIHce 2006 was held in Chicago, Illinois. On May 17, 2006,
former-Assistant
Secretary Edwin G. Foulke Jr., USDOL-OSHA presented "Reaching New Heights: Where OSHA is Heading
in 2006 and Beyond." In addition, 19 speeches and workshops were presented by OSHA speakers and
Alliance Program participants. OSHA representatives also staffed an OSHA exhibit booth.
- On May 21-26, 2005, AIHA's AIHce 2005 was held in Anaheim, California. OSHA representatives
made over eight different presentations and staffed the Alliance Program exhibit booth.
- On May 8-13, 2004 AIHA's AIHce 2004 was held in Atlanta, Georgia. On May 12, 2004
former-Assistant Secretary John Henshaw, USDOL-OSHA participated in "Question and Answer Session:
Ask John Henshaw." In addition, OSHA representatives gave presentations and served on several
panels that provided updates on OSHA. OSHA representatives staffed an OSHA exhibit booth.
- On June 9-13, 2003, at the 2nd Annual OSHA Compliance Assistance Conference in Vienna,
Virginia, AIHA representatives staffed an AIHA exhibit booth.
- On May 12-14, 2003, AIHA's AIHce 2003 was held in Dallas, Texas. Former-Assistant Secretary John
Henshaw, USDOL-OSHA presented "Navigating Unchartered Territory" outlining OSHA's 2003-2008
Strategic Management Plan goals. On May 14, 2003, five OSHA staff members and AIHA representatives
participated in the Roundtable Discussion, "Expanding OSHA's Impact: Outreach and Assistance."
- On February 1, 2003, Paula White, Director, Directorate of Cooperative and State Programs,
USDOL-OSHA presented "The OSHA-AIHA Alliance: Meeting the Goals Together" reviewing the Alliance's
goals and early successes to AIHA's Technical Committee.
- Through the Alliance, AIHA is sharing its Chapter Listings with OSHA.
- Three OSHA staffers are participating as ad hoc members on AIHA's Ergonomics Committee to
facilitate communication between the two organizations and to address and jointly resolve any
issues that arise.
- AIHA representatives helped develop and serve on the editorial board of the "Making the
Business Case for Safety and Health" Safety and Health Topics page on the OSHA Web site.
- AIHA representatives serve on the editorial boards for the following OSHA Safety and Health
Topics pages: Brownfields, Construction – Fire Safety, Construction – Laser Hazards, Construction
– Motor Vehicle Safety, Construction – Noise and Hearing Conservation, Control of Hazardous Energy
(Lockout/Tagout), Emergency Preparedness and Response, Extremely Low Frequency Radiation, Fire
Safety, Hazardous Waste, Indoor Air Quality, Ionizing Radiation, Laboratories, Laser Hazards,
Laser Electrosurgery Plume, Making the Business Case for Safety and Health, Machine Guarding,
Motor Vehicle Safety, Noise and Hearing Conservation, Non-Ionizing Radiation, Occupational
Epidemiology, Personal Protective Equipment, Radiation, Radiation: Radiological Dispersal Devices
(RDD) Dirty Bombs, Radiofrequency and Microwave Radiation, Safety and Health Programs and Sampling
and Analysis.
- AIHA representatives serve on the editorial board of OSHA's Noise and Conservation Hearing
eTool on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and health:
- On May 1, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to OSHA and Alliance
Program participants and other safety and health professionals during the 2006 North American
Occupational Safety and Health (NAOSH) Week Kick-Off event at the U.S. Department of Labor in
Washington, D.C. Mary Ann Latko, Director, Science and Technical Initiatives, represented AIHA at
the event. NAOSH Week, sponsored annually by the American Society of Safety Engineers (ASSE) and
the Canadian Society of Safety Engineering, focuses on the importance of preventing injuries and
illnesses in the workplace. AIHA along with a number of other Alliance Program participants
supported the Week.
- On October 22-25, 2005, AIHA held its Professional Conference in Industrial Hygiene in Denver,
Colorado. Several OSHA speakers participated.
- On February 15, 2005, AIHA participated in the Alliance Program's Hazard Communication
Roundtable in Washington, D.C. During the meeting, Alliance Program participants discussed hazard
communication compliance assistance projects and activities they could work on together. AIHA
representatives also participate in the Roundtable's Promoting the Globally Harmonized System for
Classification and Labeling of Chemicals Workgroup.
-- As of February 2007.
Back to Top
American Pipeline Contractors Association
Through the OSHA and American Pipeline Contractors Association (APCA) Alliance, the organizations
work together to provide the association's members and others in the pipeline construction industry,
including small businesses and non-English and limited English speaking employees, with information,
guidance and access to training resources that will help them protect employees' health and safety.
The Alliance particularly addresses reducing and preventing exposure to equipment operation (e.g.,
bulldozer, excavator and sideboom), trenching and excavation, and hydrostatic testing hazards.
To meet the outreach and communication goals of the Alliance:
- On March 9, 2007, C. Bryan Little, former-Deputy Assistant Secretary, USDOL-OSHA gave an update
on the OSHA Alliance Program and the goals of the OSHA and APCA Alliance at the APCA Annual
Convention in Fort Lauderdale, Florida.
- Through the Alliance, APCA developed a series of fact sheets for the pipeline construction
industry. The following fact sheets were posted in March 2008 on the APCA Web site and linked to
from the OSHA and APCA Alliance Web page on the OSHA Web site:
- Backhoe Operation Best Practices for Supervisory Personnel and Operators
- Dozer Operation Best Practices for Supervisory Personnel and Operators
- Excavation and Trenching Best Practices for Supervisory Personnel
- Excavator Operation Best Practices for Supervisory Personnel, Operators, and Workers
- Horizontal Directional Drilling Best Practices for Operators
- Horizontal Directional Drilling Best Practices for Supervisory Personnel
- Pressure Testing Best Practices for Personnel Conducting the Test Fact
- Pressure Testing Best Practices for Supervisory Personnel
- Sideboom Operation Best Practices for Supervisory Personnel, Operators, and Workers
-- As of April 2008.
Back to Top
American Red Cross
The OSHA and American Red Cross Alliance helps to prepare employers and employees, including the
American Red Cross employees, to respond to disasters, life-threatening injuries and emergencies. In
addition, the organizations provide information, guidance, and access to training resources on
safety and health topics, including emergency preparedness, disease prevention and first aid in the
workplace. In particular, these efforts focus on individuals with limited-English proficiency and
young employees.
To meet the outreach and communication goals of the Alliance:
- Through the Alliance, OSHA and the American Red Cross developed a presentation on OSHA
regulations including, first aid, bloodborne pathogens and cardiopulmonary resuscitation, which
has been presented by OSHA State Plan State staff at number of events:
- On November 15, 2007, by Clayton Handt, Enforcement Health Supervisor, Minnesota Occupational
Safety and Health at the Twin Cities Workplace Seminar in Minneapolis, Minnesota.
- On November 14, 2007, by Kristen Osterkamp, Industrial Hygienist, Michigan Occupational
Safety and Health at the Southeastern Michigan Workplace Seminar in Detroit, Michigan.
- On October 25, 2007, by Robin Pasko, Industrial Hygienist, Virginia Occupational Safety and
Health at the Hampton Roads Workplace Seminar in Newport News, Virginia.
- On October 11, 2007, by William Grabau, Certified Industrial Hygienist, Maryland Occupational
Safety and Health at the Central Maryland Workplace Safety Seminar in Baltimore, Maryland.
- On November 8, 2007, Sheila Arbury, Health Scientist, Office of Occupational Health Nursing,
Directorate of Science, Technology and Medicine, USDOL-OSHA and Dionne Williams, Team Leader,
Office of Health Enforcement, Directorate of Enforcement Programs, USDOL-OSHA presented
information on the OSHA bloodborne pathogen standard during the "Bloodborne Pathogens – What You
Need to Know to Prevent Disease Transmission in the Workplace" Occupational Hazards Web cast.
- On June 6, 2007, the American Red Cross participated in the Department of Labor Safety Day in
Washington, D.C. American Red Cross representatives staffed an Alliance Program exhibit booth and
provided safety and health information.
- On May 23, 2007, Tina Jones, Industrial Hygienist, Office of Science & Technology Assessment,
Directorate of Science, Technology and Medicine, USDOL-OSHA presented "OSHA Emergency Standards"
during the "Is Your Worksite Prepared for Emergencies?" Occupational Hazards Web cast.
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to the OSHA and
Alliance Program participants and other safety and health professionals during the 2007 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. The theme for the 2007
NAOSH Week was "All Modes of Transportation." The American Red Cross, along with a number of other
Alliance Program participants, supported the Week.
- On April 17, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA and key construction
industry stakeholders launched the national kick-off event for the OSHA 2007 Teen Summer Job
Safety Campaign: Build a Safe Work Foundation at the Thomas Edison High School of Technology in
Silver Spring, Maryland. The focus of the 2007 campaign was avoiding construction hazards. The
American Red Cross, along with a number of other Alliance Program participants, supported the
campaign.
- On February 6, 2007, Amanda Edens, then Director, Office of Chemical Hazards, Directorate of
Standards and Guidance, USDOL-OSHA and Jean Erdtmann, Director, Program Management and Field
Support, Preparedness and Health and Safety Services, American Red Cross presented "OSHA
Guidelines" during the "Are You Prepared for Pandemic Flu?" Occupational Hazards Web cast.
- On October 19, 2006, the 2nd Annual Emergency Preparedness Conference: Disaster Readiness on
the Home Front was held in Washington, D.C. former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA
provided opening remarks and an OSHA update. Don Wright, M.D., then Director, Office of
Occupational Medicine, Directorate of Science, Technology and Medicine, USDOL-OSHA was the
conference moderator; Thomas Galassi, Deputy Director, Directorate of Enforcement Programs,
USDOL-OSHA presented "OSHA/JCAHO Emergency Management Standards"; John Piacentino, then Medical
Officer, Office of Occupational Medicine, Biological Specialized Response Team, Directorate of
Science, Technology and Medicine, USDOL-OSHA presented "Pandemic Flu: Pandemic Preparedness and
Response-Guidance for Healthcare Workers and Healthcare Employees." OSHA representatives staffed
an Alliance Program exhibit booth.
- On October 13, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA gave a presentation
on the OSHA and American Red Cross Alliance and major OSHA initiatives at the American Red Cross
Corporate Safety Education Conference in Orlando, Florida.
- On August 24, 2006, Don Wright, M.D., then Director, Office of Occupational Medicine,
Directorate of Science, Technology and Medicine, USDOL-OSHA; Dionne Williams, Team Leader, Office
of Health Enforcement, Directorate of Enforcement Programs, USDOL-OSHA; and Jean Erdtmann,
Director, Program Management and Field Support, Preparedness and Health and Safety Services,
American Red Cross presented "Best Practices Guide: Fundamentals of a Workplace First Aid Program"
during the "Is Your Worksite an OSHA Best Practice for First Aid Programs?" Occupational Hazards
Web cast.
- On May 12-14, 2006, OSHA and American Red Cross representatives staffed an Alliance Program
exhibit booth at the American Red Cross 2006 National Convention in Washington, D.C.
- On May 27, 2005, Alan Traenkner, Director of Voluntary Programs and Outreach, Region IX San
Francisco, California Area Office, USDOL-OSHA presented "OSHA's Alliance Program and the OSHA and
American Red Cross Alliance" at the American Red Cross 2005 National Convention in San Francisco,
California.
- Through the Alliance, the American Red Cross shared its Spanish language tip sheets, including
tornado, flood and flash flood, wildfire preparedness, and power outages with OSHA. They were
posted on the American Red Cross Web site and in August 2007 linked to from the OSHA Compliance
Assistance: Hispanic Employers and Workers Web page on the OSHA Web site.
- Through the Alliance with the National Office, local American Red Cross chapters have signed
Alliances with OSHA Area Offices including Region V, Peoria, Illinois Area Office and Region III,
Allentown and Philadelphia Area Offices.
-- As of April 2008.
Back to Top
American Shipbuilding Association
OSHA and the American Shipbuilding Association (ASA), along with the National
Shipbuilding Research Program (NSRP) and the Shipbuilders Council of America (SCA) work together to
provide information and guidance to help protect shipyard employees' health and safety by minimizing
or eliminating exposure to shipyard safety and health hazards.
To meet the outreach and communication goals of the Alliance:
- ASA, NSRP and SCA worked with OSHA and members of the Agency's Strategic Partnerships in
Region III (South Tidewater Association of Ship Repairers), Region VI (SCA) and Region IX (Port
of San Diego Ship Repair Association) to develop the storyboard and script for the second
computer-animated hazard-awareness video based on actual shipyard fatalities. In April 2005, over
400 copies of the video were distributed to ASA, NSRP and SCA members and non-members and the
members of the Strategic Partnerships. On September 23, 2005, Steve Butler, Director, Office of
Maritime Enforcement, USDOL-OSHA promoted the video during the Film & Multimedia presentations at
the XVIIth World Congress on Safety and Health at Work and 2005 National Safety Council Congress
& Expo, which was held September 17-23, 2005 in Orlando, Florida.
- On September 21, 2004, John Miles, then Region VI Administrator, Dallas, Texas, USDOL-OSHA
discussed the application process, requirements and benefits of VPP from both the industry and
government perspectives at a Voluntary Protection Programs (VPP) Seminar sponsored by the OSHA
and ASA, NSRP and SCA Alliances for members of the maritime industry at Northrop Grumman Ship
Systems-Avondale Operations in Pascagoula, Louisiana.
- On September 13, 2004, Tom Pope, then Area Director, Region III, Norfolk, Virginia Area
Office, USDOL-OSHA; Jim Thornton, Director, Environment, Health & Safety, Northrop Grumman
Newport News (ASA/NSRP); and Captain Teresa Preston, Director, Safety, Environment & Quality,
Atlantic Marine, Inc. (SCA) presented a workshop, "Shipyard Alliances with OSHA," at the National
Safety Council's Congress and Expo in New Orleans, Louisiana.
- Through the Alliance, ASA, NSRP and SCA representatives worked with members of the American
Industrial Hygiene Association (AIHA), another Alliance Program participant, to develop "Safety
Alert: Deadly Hydrogen Sulfide and Shipyard Sewage" which was posted in July 2006 on the AIHA Web
site and linked to the OSHA and AIHA Alliance Web page on the OSHA Web site.
- Through the Alliance, ASA, NSRP and SCA helped develop the Barge Cleaning, Fire Protection,
Ship Building and Ship Breaking modules and serve on the editorial board for OSHA's Shipyard
Employment eTool, which is posted on the OSHA Web site.
- ASA, NSRP, and SCA members serve on the editorial boards for the Maritime Industry and
Shipbuilding and Repair Safety and Health Topics pages on the OSHA Web site.
-- As of August 2007.
Back to Top
American Society of Safety Engineers
The OSHA and American Society of Safety Engineers (ASSE) Alliance uses its
collective expertise to help advance a culture of prevention while sharing best practices and
technical knowledge, especially in the areas of ergonomics and reducing musculoskeletal disorders
(MSDs) and motor vehicle safety. In addition, the OSHA and ASSE Alliance addresses issues that
impact non-English speakers and youth employees in the workplace and promotes the annual North
American Occupational Safety and Health Week.
To meet the outreach and communications goals of the Alliance:
- On June 24-27, 2007, ASSE's Professional Development Conference, Safety 2007, was held in
Orlando, Florida. On June 25, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA made a
keynote presentation about OSHA's initiatives and its balanced approach to achieving the Agency's
goals. Lee Anne Jillings, Director, Office of Outreach Services and Alliances, Directorate of
Cooperative and State Programs, USDOL-OSHA addressed issues focusing on the Agency's Hispanic
outreach initiatives at ASSE's Safety and Professionals and the Latino Workforce (SPALW) Workgroup
meeting. In addition, OSHA speakers presented six workshops, and Mr. Foulke participated in a
roundtable discussion focusing on how to reach out to small businesses and other hard-to-reach
employers and identify potential outreach materials. OSHA representatives also staffed an Alliance
Program exhibit booth.
- On June 11-14, 2006, ASSE's Professional Development Conference, Safety 2006, was held in
Seattle, Washington. On June 12, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA
addressed the plenary session. OSHA staff attended a reception on achieving professional safety
and health certification. In addition, OSHA speakers and Alliance Program participants presented
eight workshops. OSHA representatives also staffed an Alliance Program exhibit booth. OSHA staff
attended a Reception on achieving professional safety and health certification.
- On February 16, 2006, former-Acting Assistant Secretary Jonathan L. Snare, USDOL-OSHA updated
ASSE's National Capital Chapter on the Agency's compliance assistance and cooperative programs and
the activities of the OSHA and ASSE Alliance at the ASSE National Capital Chapter Meeting in
Washington, D.C.
- On June 12-15, 2005, ASSE's Professional Development Conference, Safety 2005, was held in New
Orleans, Louisiana. On June 13, 2005, former-Acting Assistant Secretary Jonathan L. Snare, USDOL-OSHA addressed the plenary session. OSHA staff attended a workshop "Supporting SH&E Careers
in Government" on achieving professional safety and health certification. In addition, OSHA
speakers and Alliance Program participants presented seven workshops. OSHA representatives also
staffed an OSHA exhibit booth. OSHA staff attended a workshop "Supporting SH&E Careers in
Government" on achieving professional safety and health certification.
- On June 7-10, 2004, ASSE's Professional Development Conference, Safety 2004, was held in Las
Vegas, Nevada. On June 9, 2004, former-Assistant Secretary John Henshaw, USDOL-OSHA addressed the
plenary session. OSHA staff spoke during seven workshops including Paula White, Director,
Directorate of Cooperative and State Programs, USDOL-OSHA, who presented "VPP: Leaders in Safety &
Health Excellence" and Stewart Burkhammer, Director of the Office of Construction Services,
Directorate of Construction, USDOL-OSHA, who presented; "OSHA Construction Update." In addition,
OSHA staff attended a mentoring reception on achieving professional safety and health
certification and staffed an OSHA exhibit booth. OSHA staff attended a Mentoring Reception on
achieving professional safety and health certification.
- On April 6, 2004, former-Assistant Secretary John Henshaw, USDOL-OSHA updated the ASSE National
Capital Chapter on the DOL Employment Standards Administration's Safety, Health and
Return-to-Employment (SHARE) initiative and the importance of safety and health professional
certifications at the ASSE National Capital Chapter Meeting in Arlington, Virginia.
- In 2004, a representative from ASSE's Houston, Texas Chapter updated OSHA's Federal Network for
Young Worker Safety and Health (FedNet) about the chapter's young worker outreach efforts.
- On June 22-26, 2003, ASSE's Professional Development Conference, Safety 2003, was held in
Denver, Colorado. On June 23, 2003, former-Deputy Assistant Secretary Gary Visscher, USDOL-OSHA
addressed the plenary session. In addition, OSHA staff attended a Mentoring Session on achieving
professional safety and health certification. OSHA representatives also staffed an OSHA exhibit
booth.
- On June 9-13, 2003, ASSE was an exhibitor at the 2nd Annual OSHA Compliance Assistance
Conference in Vienna, Virginia.
- Through the Alliance, ASSE developed a brochure; "Workplace Safety Guide for New Workers."
- ASSE members serve on the editorial boards for the Motor Vehicle Safety and Construction-Motor
Vehicle Safety and helped develop and serve on the editorial board for the Making the Business
Case for Safety and Health, Safety and Health Topics pages on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and
health:
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA and President Donald S.
Jones, Sr., ASSE made keynote addresses at the 2007 North American Occupational Safety and Health
(NAOSH) Week Kick-off event at the U.S. Department of Labor in Washington, D.C. Mr. Foulke
presented "The Road to Safety" to OSHA and Alliance Program participants and other safety and
health representatives. NAOSH Week, sponsored annually by the ASSE and the Canadian Society of
Safety Engineering, focuses on the importance of preventing injuries and illnesses in the
workplace. A number of Alliance participants also supported the Week.
- On October 26, 2006, ASSE representatives participated in the OSHA Alliance Program Hazard
Communication Roundtable's Promoting the Globally Harmonized System for Classification and
Labeling of Chemicals (GHS) Workgroup in Washington, D.C. Workgroup participants identified
compliance assistance tools and products to educate the public, particularly small businesses,
about the GHS. They also provided recommendations on the target audiences, subjects and formats of
and methods for distributing the information.
- On May 1, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA and President Jack H.
Dobson, Jr., ASSE made keynote addresses during the 2006 North American Occupational Safety and
Health (NAOSH) Week Kick-off event at the U.S. Department of Labor in Washington, DC. NAOSH Week,
sponsored annually by the ASSE and the Canadian Society of Safety Engineering, focuses on the
importance of preventing injuries and illnesses in the workplace. A number of Alliance
participants also supported the Week.
- On September 8, 2005, ASSE representatives participated in the Alliance Program's Small
Business Roundtable, in Washington, D.C. During the meeting, Alliance Program participants
provided a number of recommendations for OSHA on how to enhance its small business compliance
assistance activities and resources.
- On August 1, 2005, ASSE representatives participated in the OSHA Alliance Program Hazard
Communication Roundtable's Promoting the Globally Harmonized System (GHS) for Classification and
Labeling of Chemicals Workgroup meeting in Washington, D.C. The Workgroup identified a number of
compliance assistance tools that it could develop to support OSHA's plans to adopt the GHS as part
of its Hazard Communication Standard.
- On May 2, 2005, former-Acting Assistant Secretary Jonathan L. Snare, USDOL-OSHA made a keynote
address during the 2005 North American Occupational Safety and Health (NAOSH) Week Kick-Off event
at the U.S. Department of Labor in Washington D.C. NAOSH Week, sponsored annually by the ASSE and
the Canadian Society of Safety Engineering, focuses on the importance of preventing injuries and
illnesses in the workplace. A number of Alliance participants also supported the Week.
- On July 8, 2004, ASSE participated in the Alliance Program's Construction Roundtable, in
Washington, D.C. During the meeting, Alliance Program participants discussed working together on
cooperative projects for the construction industry. ASSE representatives are participating in the
Roundtable's Fall Protection and Design for Safety Workgroups.
-- As of October 2007.
Back to Top
Association for High Technology Distribution
The OSHA and Association for High Technology Distribution (AHTD) Alliance
provides industrial employees, supervisors and machine designers with
information and guidance to raise their awareness of the importance of proper
selection, use, maintenance and installation of machine guarding equipment and
the use of lockout/tagout procedures.
To meet the outreach and communication goals of the Alliance:
- Through the OSHA and AHTD Alliance, AHTD developed the "Machine Guarding
Devices Training Seminar." Jim Norton, AHTD presented the seminar to OSHA
staff:
- On May 29, 2008 in Montpellier, Vermont.
- On May 21, 2008 in Wethersfield, Connecticut.
- On November 28, 2006 in Washington, D.C.
- On May 10, 2006 in Augusta, Maine.
- On April 6, 2006 in Middlebury, Massachusetts.
- On September 15, 2005, Herman Norwood, Compliance Assistance Specialist and
State VPP Coordinator, New Mexico Environment Department, Occupational Safety
and Health Bureau (OSHB) and Cathy Morino, New Mexico Environment Department,
OSHB staffed the Alliance Program exhibit booth at the 2005 AHTD Fall Meeting
in Albuquerque, New Mexico.
- On April 8, 2005, John J. Deifer, Area Director, Region IV Savannah,
Georgia Area Office, USDOL-OSHA gave a presentation on OSHA's Strategic
Management Plan, cooperative programs and the OSHA and AHTD Alliance at the
2005 AHTD Spring Meeting in Hilton Head Island, South Carolina.
- Through the OSHA and AHTD Alliance, AHTD developed the slide presentation,
"Machine Guarding Devices," which was posted on the AHTD Web site in July 2008
and linked to from the OSHA and AHTD Alliance Web page on OSHA Web site.
- Through the OSHA and AHTD Alliance, AHTD developed the "Sample Safety Light
Curtain Check-Out Log" which was posted on the AHTD Web site in June 2008 and
linked to from the OSHA and AHTD Alliance Web page on the OSHA Web site.
- AHTD representatives serve on the editorial boards for the following Safety
and Health Topics pages on the OSHA Web site: Control of Hazardous Energy
(Lockout/Tagout), Machine Guarding and Robotics.
To meet the goals of promoting the national dialogue on workplace safety and
health:
- On September 8, 2005, AHTD representatives participated in the Alliance
Program's Small Business Roundtable, in Washington, DC. During the meeting,
Alliance Program participants provided a number of recommendations for OSHA on
how to enhance its small business compliance assistance activities and
resources.
- On February 15, 2005, AHTD participated in the Alliance Program's Hazard
Communication Roundtable in Washington, DC. During the meeting, Alliance
Program participants discussed hazard communication compliance assistance
projects and activities they could work on together. AHTD representatives also
participate in the Roundtable's Promoting the Globally Harmonized System for
Classification and Labeling of Chemicals Workgroup.
-- As of August 2008.
Back to Top
Association of Occupational Health Professionals in Healthcare
The OSHA and Association of Occupational Health Professionals in Healthcare (AOHP)
Alliance focuses on protecting employees' health and safety, particularly in
reducing and preventing exposure to patient-handling hazards and bloodborne
diseases, and emergency preparedness in healthcare facilities.
To meet the outreach and communication goals of the Alliance:
- On May 5, 2008, Deputy Assistant Secretary Donald Shalhoub, USDOL-OSHA
spoke to OSHA staff, Alliance Program participants and other safety and health
professionals during the 2008 North American Occupational Safety and Health
(NAOSH) Week kick-off event at the U.S. Department of Labor in Washington, D.C.
Sponsored annually by the American Society of Safety Engineers (ASSE), an
Alliance Program participant, and the Canadian Society of Safety Engineering,
the Week focuses on the importance of preventing injuries and illnesses in the
workplace. The theme for the 2008 NAOSH Week was "Safety is Good Business."
AOHP, along with a number of other Alliance Program participants, supported the
Week.
- On September 26-29, 2007, Sheila Arbury, Health Scientist, Office of
Occupational Health Nursing, Directorate of Science, Technology and Medicine,
USDOL-OSHA, presented a poster session, "Use of Blunt-Tip Suture Needles to
Decrease Percutaneous Injuries to Surgical Personnel," daily at the AOHP Annual
National Conference in Savannah, Georgia.
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke
to OSHA staff, Alliance Program participants and other safety and health
professionals during the 2007 North American Occupational Safety and Health
(NAOSH) Week kick-off event at the U.S. Department of Labor in Washington, D.C.
Sponsored annually by the American Society of Safety Engineers (ASSE), an
Alliance Program participant, and the Canadian Society of Safety Engineering,
the Week focuses on the importance of preventing injuries and illnesses in the
workplace. The theme for the 2007 NAOSH Week was "All Modes of Transportation."
AOHP, along with a number of other Alliance Program participants, supported the
Week.
- On March 23, 2007, Peter Brown, Outreach Coordinator, Region III,
Philadelphia, Pennsylvania Area Office, USDOL-OSHA gave a presentation about
the OSHA Voluntary Protection Programs and Donna Melnic, Compliance Safety and
Health Officer, Region III, Harrisburg, Pennsylvania Area Office, USDOL-OSHA
gave a presentation about job hazards in healthcare during the AOHP – Central
Pennsylvania Chapter Meeting in Harrisburg, Pennsylvania.
- On November 3, 2006, Sheila Arbury, Health Scientist, Office of
Occupational Medicine, Directorate of Science, Technology and Medicine, USDOL-OSHA
presented "OSHA and AOHP Alliance Update and OSHA's eTools and Safety and
Health Topics Pages" at the AOHP Virginia Chapter Fall Conference in Fairfax,
Virginia.
- On October 4-7, 2006, the AOHP 25th Annual National Conference was held in
Sacramento, California. On October 6, 2006, Alvan Phillip, Occupational Safety
Specialist, Voluntary Outreach Programs, Region IX, San Francisco, California
Area Office, USDOL-OSHA presented "Federal OSHA Overview and OSHA's
Recordkeeping Highlights." Bob Nakamura, California-OSHA and representatives
from AOHP and the American Heart Association (AHA), an Alliance Program
participant, staffed a shared OSHA, AHOP and AHA Alliance Program exhibit
booth.
- On November 3, 2005, Shelia Arbury, Health Scientist, Office of
Occupational Health Nursing, Directorate of Science, Technology and Medicine,
USDOL-OSHA presented "OSHA's Health-Related Electronic Assistance Tools" at the
AOHP Virginia Chapter Fall Conference in Fairfax, Virginia.
- On October 13, 2005, Joann Natarajan, Compliance Assistance Specialist,
Region VI, Austin, Texas Area Office, USDOL-OSHA presented "Recordkeeping
Interpretations: The New Handbook" at the 25th Annual AOHP National Conference
in San Antonio, Texas. In addition, she staffed an Alliance Program exhibit
booth.
- On October 7, 2004, Paula White, then Director, Directorate of Cooperative
and State Programs, USDOL-OSHA gave the keynote address, "An OSHA Update on
Cooperative Programs," at the AOHP 24th Annual National Conference in Tampa,
Florida. An OSHA representative staffed the Alliance Program exhibit booth.
- Through the OSHA and AOHP Alliance, AOHP developed "Beyond Getting Started:
A Resource Guide for Implementing a Safe Patient Handling Program in the Acute
Care Setting" which was posted on the AOHP Web site in September 2006 and
linked to from the OSHA and AOHP Alliance Web page on the OSHA Web site
- Through the OSHA and AOHP Alliance, AOHP representatives reviewed and
provided OSHA with input during the Agency's development of its Compliance
Assistance QuickStart: Healthcare Industry Module that was posted on the OSHA
Web in August 2007.
- Through the OSHA and AOHP Alliance, AOHP published articles about the
Alliance Program in the AOHP Journal and Quarterly Electronic Newsletter.
- AOHP representatives serve on the editorial board for the Bloodborne
Pathogens and Needlestick Prevention and Health Care Facilities Safety and
Health Topics page on the OSHA Web site.
- AOHP representatives serve on the editorial board for the Hospital eTool on
the OSHA Web site.
-- As of August 2008.
Back to Top
Association
of periOperative Registered Nurses
The OSHA and Association of periOperative Registered Nurses (AORN) Alliance are providing AORN's
members and others, including perioperative healthcare providers, with information, guidance and
access to training resources to protect employees' health and safety. In particular, the Alliance
addresses the areas of preventing percutaneous and ergonomic injuries and exposure to the smoke
plume generated by the use of electrosurgery units (ESU) and lasers.
To meet the outreach and communication goals of the Alliance:
- On September 16, 2007, Ron McGill, then Area Director, Region IV, Nashville, Tennessee, Area
Office, USDOL-OSHA presented "OSHA—A Safety and Health Overview" at the 2007 AORN Clinical Specialty
Conference in Louisville, Kentucky.
- On September 8, 2007, Lyndol K. Miller, Industrial Hygienist, Region VI, Austin, Texas Area
Office, USDOL–OSHA presented "Implementing OSHA Guidelines in the Workplace" at the 2007 Fall
Conference in San Antonio, Texas.
- On June 6, 2007, AORN participated in the Department of Labor Safety Day in Washington D.C. AORN
representatives staffed an Alliance Program exhibit booth and provided safety and health
information.
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to the OSHA and
Alliance Program participants and other safety and health professionals during the 2007 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of Labor
in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE), an
Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses on
the importance of preventing injuries and illnesses in the workplace. AORN, along with a number of
other Alliance Program participants, supported the Week.
- Through the Alliance, AORN published articles about the OSHA and AORN Alliance and its products
and the Agency's compliance assistance products and activities in its monthly publication,
Management Connections.
- Through the Alliance, AORN representatives provided OSHA with input during the development of the
Agency's Safety and Health Information Bulletin, "Use of Blunt-Tip Suture Needles to Decrease
Percutaneous Injuries to Surgical Personnel," which is posted on the OSHA Web site.
-- As of January 2008.
Back to Top
Brick Industry Association
Through the OSHA and Brick Industry Association (BIA) Alliance, the
organizations are working together to provide information, guidance, and access
to training resources that will help protect employees' health and safety,
particularly in preventing exposure to hazardous levels of silica and in
reducing ergonomics injuries.
To meet the outreach and communication goals of the Alliance:
- On May 5, 2008, Deputy Assistant Secretary Donald Shalhoub, USDOL-OSHA
spoke to OSHA staff, Alliance Program participants and other safety and health
professionals during the 2008 North American Occupational Safety and Health
(NAOSH) Week kick-off event at the U.S. Department of Labor in Washington, D.C.
Sponsored annually by the American Society of Safety Engineers (ASSE), an
Alliance Program participant, and the Canadian Society of Safety Engineering,
the Week focuses on the importance of preventing injuries and illnesses in the
workplace. The theme for the 2008 NAOSH Week was "Safety is Good Business."
Michaela Ryastrom, Assistant Environment, Health and Safety, BIA attended the
event and represented BIA, which, along with a number of other Alliance Program
participants, supported the Week.
- On February 5, 2008, Brian Robertson, Industrial Hygienist, Region IV,
Clemson, South Carolina Area Office, USDOL-OSHA presented "Exposure Monitoring"
and John Steelnack, Industrial Hygienist, Office of Biological Hazards,
Directorate of Standards and Guidance, USDOL-OSHA presented "Control of Dust
Exposures" and "OSHA Silica Resources" during the BIA Silicosis Prevention
Seminar in Clemson, South Carolina.
- On February 8, 2007, James Lane, South Carolina On-site Consultation
Division attended the Silicosis Prevention for Brick Industry Workers Seminar
in Clemson, South Carolina.
- Through the OSHA and BIA Alliance, BIA developed the manual, Occupational
Health Program for Exposure to Crystalline Silica in the Brick Industry, which
was posted on the BIA Web site in May 2008 and linked to from the OSHA and BIA
Web page on the OSHA Web site.
- Through the OSHA and BIA Alliance, BIA has written and published articles
about the OSHA and BIA Alliance and the Agency's compliance assistance products
and activities in its electronic newsletter, Brick News Online. Specifically,
the May 2008 edition of Brick News Online contained "Making the Business Case
for safety and Health" by former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA.
- BIA representatives serve on the editorial boards of the following Safety
and Health Topics pages on the OSHA Web site: Confined Spaces, Control of
Hazardous Energy (Lockout/Tagout), Heat Stress, Machine Guarding, and Silica,
Crystalline.
-- As of August 2008.
Back to Top
Club Managers Association of America
Through the Alliance, OSHA and the Club Managers Association of America (CMAA)
provide CMAA's members and others, including small businesses, with information,
guidance, and access to training resources to help protect membership club
employees' health and safety including non-English or limited English speaking
and youth workers. In particular, the Alliance focuses on addressing hazard
communication, recordkeeping and respiratory protection issues. In addition, the
organizations address safety and health issues related to membership clubs'
landscaping and horticultural activities.
To meet the outreach and communication goals of the Alliance:
- On May 5, 2008, Deputy Assistant Secretary Donald Shalhoub, USDOL-OSHA
spoke to OSHA staff, Alliance Program participants and other safety and health
professionals during the 2008 North American Occupational Safety and Health
(NAOSH) Week kick-off event at the U.S. Department of Labor in Washington, D.C.
Sponsored annually by the American Society of Safety Engineers (ASSE), an
Alliance Program participant, and the Canadian Society of Safety Engineering,
the Week focuses on the importance of preventing injuries and illnesses in the
workplace. The theme for the 2008 NAOSH Week was "Safety is Good Business."
Melissa Low, Director, Industry Resources and Legislative Services, CMAA,
attended the event and represented CMAA, which, along with a number of other
Alliance Program participants, supported the Week.
- On February 4, 2008, Joan D. Spencer, Compliance Assistance Specialist,
Region IV, Tampa, Florida Area Office, USDOL-OSHA presented "Introduction to
OSHA for Small Businesses" at the CMAA World Conference on Club Management in
Orlando, Florida. She also staffed an Alliance Program exhibit booth.
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke
to OSHA staff, Alliance Program participants and other safety and health
professionals during the 2007 North American Occupational Safety and Health
(NAOSH) Week kick-off event at the U.S. Department of Labor in Washington, D.C.
Sponsored annually by the American Society of Safety Engineers (ASSE), an
Alliance Program participant, and the Canadian Society of Safety Engineering,
the Week focuses on the importance of preventing injuries and illnesses in the
workplace. The theme for the 2007 NAOSH Week was "All Modes of Transportation."
The CMAA Alliance, along with a number of other Alliance Program participants,
supported the Week.
- On February 27-March 3, 2005, representatives from the Office of Small
Business Assistance, Directorate of Cooperative and State Programs, USDOL-OSHA
and Region VI, Baton Rouge, Louisiana Area Office, USDOL-OSHA staffed an
Alliance Program exhibit booth at the CMAA 78th Annual World Conference on Club
Management and 28th Annual Exposition in New Orleans, Louisiana.
- On October 18, 2004, Paula White, then Director, Directorate of Cooperative
and State Programs, USDOL-OSHA updated the CMAA members on OSHA activities and
issues at the CMAA Leadership/Legislative Conference in Arlington, Virginia.
- On June 14-18, 2004, CMAA had an Alliance Program exhibit booth at the 2004
OSHA Compliance Assistance Training Sessions in Falls Church, Virginia.
- On September 15, 2003, Gary Visscher, former-Deputy Assistant Secretary, USDOL-OSHA updated CMAA members on OSHA activities and the signing of the OSHA
and CMAA Alliance at the CMAA Leadership/Legislative Conference in Arlington,
Virginia.
- In 2003, CMAA distributed to its members a packet of information on
powered industrial truck safety prepared by OSHA, the National Institute for
Occupational Safety and Health (NIOSH) and the Department of Labor's Wage and
Hour Division.
- Through the OSHA and CMAA Alliance, CMAA published the following articles
for its Twelve Steps to Safety series in its Outlook publication. The articles
were also posted on the CMAA Web site and linked to from the OSHA and CMAA
Alliance Web page on the OSHA Web site:
- "Step One: How and Where Does One Start?" (February 2008)
- "Step Two: Recordkeeping and Reporting" (March 2008)
- "Step Three: Accident Prevention and Investigation" (April 2008)
- "Step Four: Hazard Communication" (May 2008)
- "Step Five: Respiratory Protection" (June 2008)
- Through the OSHA and CMAA Alliance, CMAA developed the following Toolbox
Talks for the membership. The Talks were posted on the CMAA Web site and linked
to from the OSHA and CMAA Alliance Web page on the OSHA Web site:
-
"Avoiding Heat Stress" (May 2007)
-
"Cold Weather Safety" (July 2007)
-
"Employee Safety and Health Orientation" (April 2007)
-
"How to Use the Tool Box Talks for Club Employees" (April 2007)
-
"The Importance of Handwashing" (April 2007)
-
"Knife Safety" (July 2008)
-
"Ladder Safety" (May 2007)
-
"Make Safety a Priority" (April 2007)
-
"Pesticides and Fertilizer Spraying" (July 2007)
-
"Safety and Health Education" (April 2007)
-
"Slips and Falls Inside the Clubhouse" (May 2007)
-
"Trenching Safety" (October 2007)
-
"Youth Workers" (June 2007)
- Through the OSHA and CMAA Alliance, CMAA published articles about the OSHA
and CMMA Alliance in its publications, Legislative Report, Outlook and Chapter
Digest.
- CMAA representatives serve on the editorial boards for the following Safety
and Health Topics pages on the OSHA Web site: Motor Vehicle Safety and Teen
Workers
To meet the goals of promoting the national dialogue on workplace safety and
health:
- On February 1, 2007, CMAA representatives participated in the Alliance
Program's Small Business Roundtable in Washington, DC. During the meeting,
Alliance Program participants reviewed promotional materials and tools that
OSHA designed in response to the recommendations made during the Roundtable
meeting on September 8, 2006.
- On February 15, 2005, CMAA representatives participated in the Alliance
Program's Hazard Communication Roundtable in Washington, D.C. During the
meeting, Alliance Program participants discussed hazard communication
compliance assistance projects and activities they could work on together. CMAA
representatives also participate in the Roundtable's Promoting the Globally
Harmonized System for Classification and Labeling of Chemicals Workgroup.
-- As of August 2008.
Back to Top
Concrete
Sawing and Drilling Association
Through the OSHA and Concrete Sawing and Drilling Association (CSDA) Alliance, the organizations are
working together to provide the association's members and other sawing and drilling operators with
information, guidance and access to training resources to help them protect employees' health and
safety. OSHA and CSDA focus on addressing highway work zone hazards, motor vehicle safety and
respiratory protection for hazards associated with silica.
To meet the outreach and communication goals of the Alliance:
- On January 22-26, 2007, the World of Concrete 2007 was held in Las Vegas, Nevada. On January 24,
2007, Stew Burkhammer, Director, Office of Construction Services, Directorate of Construction,
USDOL-OSHA presented a seminar, "Outreach Programs for Construction." Representatives from OSHA
Region IX, Nevada OSHA and Nevada On-site Consultation Program also staffed an Alliance Program
exhibit booth.
- Through the Alliance, CSDA developed "CSDA Best Practices for Sawing and Drilling Operations:
Highway Workzone Safety Best Practices Fact Sheet," which is posted on the CSDA Web site and linked
to from the OSHA and CSDA Alliance Web page on the OSHA Web site.
- Through the Alliance, CSDA members published articles about the OSHA and CSDA Alliance and the
Agency's compliance assistance products and activities in its monthly publications, Concrete
Openings and CSDA News, and bi-monthly magazine, PDi.
- CSDA representatives serve on the editorial board of the Concrete and Concrete Products -
Manufacturing and Construction Safety and Health Topics page on the OSHA Web site.
--As of July 2007.
Back to Top
Coordinating Committee for Automotive Repair
Through the Alliance, OSHA and the Coordinating Committee for Automotive
Repair (CCAR) provide CCAR affiliates and others in the automotive industry, including but not
limited to youth and Spanish-speaking workers, with information, guidance and access to training
resources that help them protect employees' health and safety, particularly by focusing on workplace
vehicle safety, abrasive wheel machinery (including associated silica hazards) and ergonomics.
To meet the outreach and communication goals of the Alliance:
- On February 3-6, 2007, Robert G. Stewart, President, CCAR, staffed a CCAR exhibit booth and
distributed Alliance Program information, including the OSHA and CCAR Alliance Activities Summary,
at the 2007 National Automobile Dealers Association Convention and Exposition in Las Vegas,
Nevada.
- Through the Alliance, CCAR developed the "Operating Motor Vehicles: A Guide for Employees in
the Motor Vehicle Industry." In December 2006, it was posted on the CCAR Web site and linked to
from the OSHA Web site.
- On June 19-23, 2006, CCAR representatives staffed a CCAR booth and distributed Alliance Program
information at the 2006 SkillsUSA, an Alliance Program participant, national conference in Kansas
City, Missouri.
- On April 18-19, 2006, CCAR representatives staffed a CCAR booth and distributed Alliance
Program information at the 2006 National Automobile Technology Competition (NATC) in New York
City, New York.
- On February 11-14, 2006, Robert Stewart, President, CCAR staffed a CCAR booth and distributed
Alliance Program information at the 2006 National Automobile Dealers Association Convention and
Exposition in Orlando, Florida.
- On October 12, 2004, the 3rd Annual Collision Industry Trade Show was held in Northlake,
Illinois. Jess McCluer, Program Analyst, Office of Outreach Services and Alliances, Directorate of
Cooperative and State Programs, USDOL-OSHA and Seah Ochester, Safety & Pollution Prevention
Officer, CCAR updated attendees on OSHA's Alliance Program, particularly the activities of the
OSHA-CCAR Alliance. Representatives from both organizations staffed an Alliance Program exhibit
booth.
- CCAR representatives serve on the editorial boards of Motor Vehicle Safety and Autobody Repair
and Refinishing Safety and Health Topics pages on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and health:
- On February 15, 2005, CCAR participated in the Alliance Program's Hazard Communication
Roundtable in Washington, DC. During the meeting, Alliance Program participants discussed hazard
communication compliance assistance projects and activities they could work on together. CCAR
representatives also participate in the Roundtable's Promoting the Globally Harmonized System for
Classification and Labeling of Chemicals Workgroup.
-- As of February 2007.
Back to Top
Crane,
Hoist and Monorail Alliance
The OSHA and Crane, Hoist and Monorail Alliance, is comprised of the Crane
Manufacturers Association of America (CMAA), the Hoist Manufacturers Institute (HMI)
and the Monorail Manufacturers Association (MMA). Together, they work to provide
crane, hoist and monorail systems owners and operators in general industry and
construction with information, guidance, and access to training resources that
will help them protect employees' health and safety. These employees include
Spanish-speaking and other high-risk or vulnerable "hard-to-reach" employees.
Specifically, the Alliance works to reduce and prevent exposure to safety and
health issues such as electrical hazards, falls from elevations or being struck
by moving equipment.
To meet the outreach and communication goals of the Alliance:
- On May 5, 2008, Deputy Assistant Secretary Donald Shalhoub, USDOL-OSHA
spoke to OSHA staff, Alliance Program participants and other safety and health
professionals during the 2008 North American Occupational Safety and Health
(NAOSH) Week kick-off event at the U.S. Department of Labor in Washington, D.C.
Sponsored annually by the American Society of Safety Engineers (ASSE), an
Alliance Program participant, and the Canadian Society of Safety Engineering,
the Week focuses on the importance of preventing injuries and illnesses in the
workplace. The theme for the 2008 NAOSH Week was "Safety is Good Business." The
Crane, Hoist and Monorail Alliance, along with a number of other Alliance
Program participants, supported the Week.
- On January 8-11, 2007, Lee Anne Jillings, then Director, Office of Outreach
Services and Alliances, Directorate of Cooperative and State Programs (DCSP),
USDOL-OSHA and Jess McCluer, then Program Analyst, Office of Outreach Services
and Alliances, DCSP, USDOL-OSHA and OSHA representatives from the Region V,
Calumet City, Illinois Area Office staffed an Alliance Program exhibit booth at
ProMat 2007 in Chicago, Illinois.
- On September 18-19, 2006, Paula White, then Director, Directorate of
Cooperative and State Programs, USDOL-OSHA gave three speeches about the
Alliance and the Agency's cooperative programs and compliance assistance
resources at the Material Handling Institute of America (MHIA) 2006 Annual
Membership and Product Sections & Councils Meetings in Scottsdale, Arizona.
- Through the OSHA and Crane, Hoist and Monorail Alliance, Crane, Hoist and
Monorail participants developed the following fact sheets and safety tips
sheets, in English and in Spanish, which were posted on the Crane, Hoist and
Monorail Alliance Web site and linked to from the OSHA and Crane, Hoist and
Monorail Alliance Web page on the OSHA Web site:
- "Fact Sheet No. 1: Proper Inspection and Maintenance of Overhead
Cranes and Hoists" (July 2006)
- "Fact Sheet No. 2: Hoists, Cranes, Pullers - Safety & Warning Labels and
Test Certification" (July 2006)
- "Safety Tips Sheet No. 1: Proper Use of Hand Signals for Cab-Controlled
Cranes" (July 2006)
- "Safety Tips Sheet No. 2: Pre-Operational Equipment Check of Cranes and
Hoists" (July 2006)
- "Safety Tips Sheet No. 3: Safe Lifting Practices" (July 2006)
- "Safety Tips Sheet No. 4: Hoist Operation" (July 2006)
- "Safety Tips Sheet No. 5: Employee Guidelines for Safe Carrying and
Transporting" (May 2008)
- "Safety Tips Sheet No. 6: Management Guidelines for Safe Carrying and
Transporting of Loads" (May 2008
- "Safety Tips Sheet No. 7: Hazard Evaluation Checklist for Lifting,
Carrying, Pushing, or Pulling" (May 2008)
- "Safety Tips Sheet No. 8: Alternatives to Manual Handling of Individual
Containers" (May 2008)
- Through the Alliance, the CMAA, HMI and MMA participants distributed their
publications, including industry-related specifications, standards, operator
manuals, checklists and recommended practices, to OSHA's Regional and Area
Offices.
- Through the Alliance, the Crane, Hoist and Monorail participants published
articles about the OSHA and Crane, Hoist and Monorail Alliance in MHIA's
quarterly publication, on the Mhove.
- Crane, Hoist and Monorail Alliance representatives helped develop and serve
on the editorial board of the Basic Steel Products Safety and Health Topics
page on the OSHA Web site.
- Crane, Hoist and Monorail Alliance representatives helped develop the
Thermoforming module and serve on the editorial board of the Machine Guarding
eTool on the OSHA Web site.
-- As of August 2008.
Back to Top
The Dow Chemical Company
The OSHA and The Dow Chemical Company (Dow) Alliance focuses on using the
organizations' collective expertise to further enhance a culture of prevention, while sharing proven
practices and technical knowledge in the areas of process safety management (PSM) and ergonomics.
To meet the outreach and communications goals of the Alliance:
- On October 18, 2006, Mark Spence, Manager, Health & Safety Regulatory Affairs, The Dow
Chemical Company gave a presentation on the OSHA and The Dow Chemical Company Alliance to the
Automotive Industry Action Group (AIAG) in Southfield Michigan.
- On August 10, 2006, Mark Spence, Manager, Health & Safety Regulatory Affairs, The Dow Chemical
Company gave an update on the OSHA and Dow Alliance at the ORC Worldwide's Occupational Safety
and Health Workgroup Meeting in Washington, D.C.
- On January 13, 2006, the workshop "Managing Chemical Reactivity Hazards: A Workshop for
Non-Chemists" was presented at Center for Chemical Process Safety (CCPS) Technical Steering
Committee Meeting in Houston, Texas. OSHA Alliances with The Dow Chemical Company, Chemical
Reactivity Hazards Management and the National Federation of Independent Business worked together
to organize and sponsor the workshop.
- Through the Alliance, OSHA and The Dow Chemical Company developed a workshop, "OSHA's Process
Safety Management (PSM) Standard: The Dow Approach," that discusses the various aspects of the
PSM standard, including process safety information, process hazard analysis procedures, change
management and Dow's implementation of PSM Standard in its workplaces. The workshop has been
presented:
- On May 3, 2007, at Region I's Compliance Assistance Specialist and On-site Consultation
Project Managers Meeting in Mystic, Connecticut, to OSHA staff from Region I.
- On November 16-17, 2005, at Dow's Operations Plant in South Charleston, West Virginia, to
OSHA staff from the National Office and Region III and West Virginia's Consultation Project.
This workshop included a tour of Dow's facility.
- On October 13-14, 2004, at Dow's Louisiana Operations in Plaquemine, Louisiana, to
representatives from OSHA staff from the National Office, Regions IV and VI, and North Carolina
Department of Labor. This workshop included a tour of Dow's facility.
- On September 16, 2003, at the OSHA Training Institute in Arlington Heights, Illinois, to
OSHA staff from the National Office and Region V, Michigan Occupational Safety and Health
Administration and Wisconsin's On-site Consultation Program.
- On September 26, 2005, Cal Towns, Process Safety Advisor, Global Chlorinated Organics
Business, The Dow Chemical Company helped present "Managing Chemical Reactivity Hazards: A
Workshop for Non-Chemists," at the Chlorine Institute's 2005 Fall Meeting in Atlanta, Georgia.
The OSHA and Chemical Reactivity Hazards Management Alliance organized and sponsored the event
with assistance from the National Federation of Independent Business, another Alliance Program
participant.
- On September 22, 2005, Paula White, Director, Directorate of Cooperative and State Programs,
USDOL-OSHA; Mark Spence, Manager, Health & Safety Regulatory Affairs, The Dow Chemical Company;
and a representative from the OSHA and Graphic Arts Coalition Alliance participated on a panel,
"Successes of OSHA's Ergonomic Alliances" at the National Safety Council's 2005 Congress and Expo
in Orlando, Florida.
- On June 17, 2004, Terry Hanning, Leader, Supply Chain, Environment, Health & Safety Regulatory
Affairs, The Dow Chemical Company presented "Safety-Based Performance: A Global Initiative to
Reduce Motor Carrier Incidents" at the 2004 OSHA Compliance Assistance Training Sessions in Falls
Church, Virginia. Dow had an exhibit booth at the conference.
- On May 14, 2004, Karen Kerns, Senior Industrial Hygienist, Global Industrial Hygiene Expertise
Center, The Dow Chemical Company gave a presentation on a new workplace quantitative ergonomics
risk assessment tool at an Ergonomics Roundtable in Washington D.C.
- On June 12, 2003, Samuel L. Smolik, then Vice President, Environment, Health and Safety, The
Dow Chemical Company presented "A Vision and Culture of Zero" at the 2nd Annual OSHA Compliance
Assistance Conference in Vienna, Virginia. Dow had an exhibit booth at the conference.
- Through the Alliance, The Dow Chemical Company and American Meat Institute, a
former Alliance
Program participant, helped develop and are on the editorial board for the Emergency Response and
Receiving and Storage modules for OSHA's Ammonia Refrigeration eTool, which is posted on the OSHA
Web site.
- Dow representatives serve on the editorial boards for the Ammonia Refrigeration, Chemical
Reactivity Hazards: Emergency Preparedness and Response, Health Care Facilities, Heat Stress,
Isocyanates, Motor Vehicle Safety, and Process Safety Management Safety and Health Topics pages
on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and
health:
- Through the Alliance, The Dow Chemical Company and OSHA developed the following case studies:
- "Motor Carrier Safety: A Collaborative Approach to Reducing Motor Carrier Incidents" that
describes how Dow worked with one of its contractors to enhance safety through the use of a
behavior-based safety program. The study was posted on the OSHA Web site in February 2006.
- "The Dow Chemical Company's Use of Six Sigma Methodology" a Motor Vehicle Accident Case
Study, that describes the Six Sigma methodology and how Dow used it to successfully reduce motor
vehicle accidents in the company's Hydrocarbons and Energy business unit. The study was posted
on the OSHA Web site in December 2005.
- "The Dow Chemical Company's Use of the 'Six Sigma' Methodology" that describes Dow's approach
to identifying and implementing ergonomics solutions through the use of Six Sigma. The case
study was posted on the OSHA Web site in May 2004.
- On February 15, 2005, The Dow Chemical Company participated in the Alliance Program's Hazard
Communication Roundtable in Washington, D.C. During the meeting, Alliance Program participants
discussed hazard communication compliance assistance projects and activities they could work on
together. Dow representatives also participate in the Roundtable's Promoting the Globally
Harmonized System for Classification and Labeling of Chemicals Workgroup Meetings.
--As of August 2007.
Back to Top
Energy Recovery Council
The OSHA and Energy Recovery Council (ERC)
Alliance works to provide ERC's members and others, including small businesses,
with information, guidance, and access to training resources that will help them
protect employees' health and safety associated with the management of municipal
solid waste, especially related to hauler safety. In particular, OSHA and ERC
promote the annual Hauler Safety Campaign: "Safety – Do It for Life." Further,
OSHA and ERC work together to reduce and prevent exposure to electrical hazards
in waste to energy facilities.
To meet the outreach and communication goals of the Alliance:
- In June 2008, OSHA, state and ERC representatives participated in "Hauler
Safety Campaign: Safety – Do It for Life" events throughout the country.
- On May 19-21, 2008, the North American Waste-to-Energy Conference was held
in Philadelphia, Pennsylvania. On May 19, 2008, former-Assistant Secretary Edwin G.
Foulke, Jr., USDOL-OSHA gave the keynote presentation, "OSHA Adds Value to
Business, Work and Life." On May 20, 2008, Lee Anne Jillings, then Director,
Office of Outreach Services and Alliances, Directorate of Cooperative and State
Programs (DCSP), USDOL-OSHA and ERC representatives presented "OSHA Update:
OSHA's Compliance Assistance and Industry Issues Update."
- On May 5, 2008, Deputy Assistant Secretary Donald Shalhoub, USDOL-OSHA
spoke to OSHA staff, Alliance Program participants and other safety and health
professionals during the 2008 North American Occupational Safety and Health
(NAOSH) Week kick-off event at the U.S. Department of Labor in Washington, D.C.
Sponsored annually by the American Society of Safety Engineers (ASSE), an
Alliance Program participant, and the Canadian Society of Safety Engineering,
the Week focuses on the importance of preventing injuries and illnesses in the
workplace. The theme for the 2008 NAOSH Week was "Safety is Good Business."
ERC, along with a number of other Alliance Program participants, supported the
Week.
- On November 27, 2007, Maryann Medeiros, Compliance Assistance Specialist,
Region I, Providence, Rhode Island Area Office, USDOL-OSHA presented
"Industrial Health and Health Items Related to Contracted Work" at
Wheelabrator's 5th Annual Contractor Safety Summit in Providence, Rhode Island.
- On August 29 2007, Lee Anne Jillings, then Director, Office of
Outreach Services and Alliances, DCSP, USDOL-OSHA and ERC representatives Kent
Baughn, Manager, Health & Safety, Wheelabrator Technologies Inc., Hampton, NH;
Angus Miller, Director, Safety & Training, Veolia ES Waste to Energy, Inc.,
Ronkonkoma, NY; and Justin August, Manager, Health & Safety, Covanta Energy,
Fairfield, NJ presented "Safety Campaign on a National Scale: Building a
Successful Safety Campaign" at the 23rd Annual National Voluntary Protection
Programs Participants' Association Conference in Washington, D.C.
- In June 2007, OSHA and ERC participated in the "Hauler Safety
Campaign: Safety – Do It for Life." On June 13, 2007, C. Bryan Little,
former-Deputy Assistant Secretary, USDOL-OSHA gave a presentation on the Alliance
Program and the activities of the OSHA and ERC Alliance at the Hauler Safety
Campaign kick-off event in Lorton Virginia.
- On August 30, 2006, Lee Anne Jillings, then Director, Office of Outreach
Services and Alliances, DCSP, USDOL-OSHA and ERC representatives gave a
presentation on the Alliance Program and the activities of the OSHA and ERC
Alliance, including the Hauler Safety Campaign, at the Voluntary Protection
Programs Participants' Association, 22nd Annual National VPPPA Conference in
Orlando, Florida.
- In June 2006, through the OSHA and ERC Alliance, ERC developed the
"Hauler Safety Campaign: Safety – Do It for Life." Region I Voluntary
Protection Programs' representatives, state representatives and ERC
participated in campaign events throughout the country.
- Through the OSHA and ERC Alliance, ERC published "Message to the
Energy Recovery Council from former-Assistant Secretary Edwin G. Foulke,
Jr., USDOL-OSHA" in the July 25, 2008 edition of the ERC weekly electronic
newsletter, ERC Weekly Update. In addition, articles about the OSHA and ERC
Alliance have appeared in Business and Labor Reports and Waste Business Journal.
- ERC representatives serve on the editorial boards for the following Safety
and Health Topics pages on the OSHA Web site: Confined Spaces and Lead.
-- As of August 2008.
Back to Top
Forging Industry Association
Through the Alliance, OSHA and the Forging Industry Association (FIA) provides FIA members and
others in the forging industry, including small businesses, with information, guidance, and access
to training resources to help them protect employees' health and safety. In particular, the Alliance
addresses issues associated with ergonomics and machine guarding, including the prevention of
amputations that may be experienced by employees in the forging industry.
To meet the outreach and communication goals of the Alliance:
- On October 22-23, 2007, FIA members distributed information on OSHA compliance assistance
resources and cooperative programs including the Alliance Program brochure, On-site Consultation
Program Fact Sheet, OSHA and FIA Alliance Activities Summary and the FIA brochure, "OSHA
Cooperative Programs," which was developed through the Alliance, at the FIA Fall Meeting of
Members in Atlanta, Georgia.
- On May 5-8, 2007, FIA members distributed information on OSHA cooperative programs including
the OSHA and FIA Alliance Activities Summary and the FIA brochure, "OSHA Cooperative Programs,"
which was developed through the Alliance, to the attendees during the FIA Annual Meeting of
Members in Huntington Beach, California.
- Through the Alliance, FIA developed the "Reduce the Risk of Back Injuries" Tips Sheet which was
posted in March 2008 on the FIA Web site and linked to from the OSHA and FIA Alliance Web page on
the OSHA Web site.
- Through the Alliance, FIA developed the "Help Prevent Eye Injuries" and "Help Prevent Hand
Lacerations" Tips Sheets which were posted in January 2008 on the FIA Web site and linked to from
the OSHA and FIA Alliance Web page on the OSHA Web site.
- Through the Alliance, FIA developed the "OSHA Cooperative Programs" brochure which was posted
in November 2007 on the FIA Web site and linked to from the OSHA and FIA Alliance Web page on the
OSHA Web site.
-- As of April 2008.
Back to Top
Independent Electrical Contractors, Inc.
The OSHA and Independent Electrical Contractors (IEC) Alliance addresses
reducing and preventing electrical contractors employees' exposure to falls, rear-end auto
collisions and material-handling hazards by providing the IEC members and others with information
and guidance and increasing their access to training resources.
To meet the outreach and communication goals of the Alliance:
- On October 24-27, 2007, the 50th Annual IEC National Convention and Electric Expo was held in
Houston, Texas. On October 25, 2007, James Shelton, Compliance Assistance Specialist, Region VI,
Houston North Area Office, USDOL-OSHA staffed the IEC Safety Zone Exhibit. On October 26, 2007,
Danezza Quintero, Safety and Occupational Health Specialist, Office of Construction Services,
Directorate of Construction, USDOL-OSHA presented "OSHA for Construction." In addition, eight
representatives from OSHA Region VI North Houston, Texas Area Office participated in the IEC
Basic Safety Training Class.
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to the OSHA and
Alliance Program participants and other safety and health professionals during the 2007 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. IEC along with a number
of other Alliance Program participants supported the Week.
- On April 24, 2007, Bob Isiminger, Office of Engineering Safety, Directorate of Standards and
Guidance, USDOL-OSHA provided an OSHA Electrical Standards Update at the IEC Safety Committee
meeting during the IEC National Legislative Conference in Washington, D.C.
- On February 1, 2007, IEC representatives participated in the Alliance Program's Small Business
Roundtable in Washington, D.C. During the meeting, Alliance Program participants reviewed
promotional materials and tools that OSHA designed in response to the recommendations made during
the Roundtable meeting on September 8, 2006.
- On September 27-30, 2006, the 49th Annual IEC National Convention and Electric Expo was held
in Denver, Colorado. On September 28, 2006, representatives from OSHA Region VIII Denver,
Colorado Area Office participated in the IEC Basic Safety Training Class. Erv Krueger, OSHA,
Labor Liaison, Regional Office, Region VIII, USDOL-OSHA staffed the IEC and OSHA Alliance Program
exhibit booth.
- On September 8, 2006, IEC representatives participated in the Alliance Program's Small
Business Roundtable in Washington, D.C. During the meeting, Alliance Program participants
provided a number of recommendations for OSHA on how to enhance its small business compliance
assistance activities and resources.
- On October 5-6, 2005, the 48thAnnual IEC National Convention and Electric Expo was held in
Baltimore, Maryland. On October 5, 2006, Danezza Quintero, Safety and Occupational Health
Specialist, Office of Construction Services, Directorate of Construction, USDOL-OSHA gave a
presentation on fall protection with an emphasis on scaffolding, ladders and trips. On October 6,
2005, Ms. Quintero provided the OSHA 10-Hour Construction Outreach Training Program to small
business employers. Earl Hicks, Program Analyst, Office of Outreach Services and Alliances,
Directorate of Cooperative and State Programs, USDOL-OSHA; Virginia Anklin, Maryland OSHA and
John McFee, Construction Coordinator, Region III, Philadelphia, Pennsylvania Area Office,
USDOL-OSHA staffed an OSHA and IEC Alliance Program exhibit booth.
- On September 22, 2005, Lee Anne Jillings, Director, Office of Outreach Services and Alliances,
Directorate of Cooperative and State Programs, USDOL-OSHA and John Masarick, IEC spoke during a
workshop "Construction-Related Safety and Health Training" along with representatives of other
construction-related Alliances at the 2005 National Safety Council's Congress and Expo in
Orlando, Florida.
- On October 2, 2004, the 47th Annual IEC National Convention and Electric Expo 2004 was held in
Minneapolis, Minnesota. Danezza Quintero, Safety and Occupational Health Specialist, Office of
Construction Services, Directorate of Construction, USDOL-OSHA gave a presentation on fall
protection with an emphasis on scaffolding, ladders and trips. Jess McCluer, then Program
Analyst, Office of Outreach Services and Alliances, Directorate of Cooperative and State
Programs, USDOL-OSHA staffed the OSHA and IEC Alliance Program exhibit booth.
- On July 8, 2004, IEC participated in the Alliance Program's Construction Roundtable, in
Washington, D.C. During the meeting, construction-related Alliance Program participants discussed
working together on Alliance-related projects for the construction industry. IEC representatives
are participating in the Roundtable's Fall Protection and Design for Safety Workgroups.
- On June 14-18, 2004, IEC exhibited at the 2004 OSHA Compliance Assistance Training Sessions in
Falls Church, Virginia.
- On September 11, 2003, the 46th Annual IEC National Convention and Electric Expo 2003 was held
in Anaheim, California. Berrien Zettler, then Deputy Director, Directorate of Construction,
USDOL-OSHA gave the keynote address. OSHA representatives staffed the OSHA and IEC Alliance
Program exhibit booth.
- On June 9-13, 2003, IEC exhibited during the 2nd Annual OSHA Compliance Assistance Conference
in Vienna, Virginia.
- On October 14, 2002, Paula White, Director, Directorate of Cooperative and State Programs,
USDOL-OSHA presented "Extending OSHA's Impact" to the Integrated Electrical Services, a member
company of IEC.
- Through the Alliance, IEC published articles on the OSHA and IEC Alliance in its
publications--Codes & Safety, Connection and Insight.
- Through the Alliance, OSHA and IEC developed the Subpart S-Electrical Standard Training
Program, which was provided to more than 643 people throughout the country during several
training sessions at IEC member and non-member companies.
- Through the Alliance, IEC developed the fact sheet, "Electrical Standard Subpart S," which
contains updates to 29 CFR 1910 Subpart S-Electrical Standard. It was posted on the IEC Web site
and linked to from the IEC and OSHA Alliance Web page on the OSHA Web site.
- Through the Alliance, IEC modified for the electrical contractor industry the Ladder Safety
Toolbox Talks developed through the Alliance Program Construction Roundtable Fall Protection
Workgroup. The Toolbox Talks were posted on the IEC Web site and linked to from the OSHA and IEC
Alliance Web page on the OSHA Web site.
- IEC representatives serve on the editorial boards of the Electrical Contractors Safety and
Health Topics pages on the OSHA web site.
- IEC representatives helped develop and serve on the editorial board for the Ergonomics eTool:
Solutions for Electrical Contractors on the OSHA Web site.
-- As of January 2008.
Back to Top
Independent Lubricant Manufacturers Association
The OSHA and Independent Lubricant Manufacturers Association (ILMA) Alliance
focuses on providing the Association's members and others with information, guidance, and access to
training resources to help them protect employees' health and safety. In particular, the Alliance
addresses safety and health issues, including exposure to metalworking fluids and industrial hazards
in the manufacturing environment.
To meet the outreach and communication goals of the Alliance:
- On August 28, 2007, Barnett Lawrence, Compliance Assistance Coordinator, Office of Outreach
Services and Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA; Cathy Cronin,
Chief, Division of Training and Educational Development, Office of Training and Education,
Directorate of Training and Education, USDOL-OSHA; and Carol Poole, Safety and Health Specialist,
Quaker Chemical Corporation presented "Getting the Most Out of the OSHA Web Site" workshop at the
23rd Annual National Voluntary Protection Programs Participants' Association Conference in
Washington, D.C.
- On May 7, 2007, Carol Poole Safety and Health Specialist, Quaker Chemical Corporation presented
"Health, Safety & Regulatory Affairs II" at the 62nd Meeting of the Society of Lubricant Tribology
Engineers in Philadelphia, Pennsylvania.
- On November 5-9, 2006, the National Safety Council's Congress and Expo was held in San Diego,
California. On November 6, 2006, Barnett Lawrence, Compliance Assistance Coordinator, Office of
Outreach Services and Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA; Cathy
Cronin, Chief, Division of Training and Educational Development, Office of Training and Education,
Directorate of Training and Education, USDOL-OSHA; and Carol Poole, Quaker Chemical Corporation
presented the "Getting the Most Out of OSHA's Web Site" workshop. On November 7, 2006, Lee Anne
Jillings, Director, Office of Outreach Services and Alliances, USDOL-OSHA; and John Howell, ILMA,
along with another Alliance Program participant presented "Success of the Alliance Program: Best
Practices."
- On October 16, 2005, Lee Anne Jillings, Director, Office of Outreach Services and Alliances,
Directorate of Cooperative and State Programs, USDOL-OSHA gave a presentation on the Alliance
Program and the activities of the OSHA and ILMA Alliance and OSHA's enforcement activities at
ILMA's Annual Conference in Orlando, Florida.
- Through the Alliance, ILMA developed the "Dermal Assessment Guide," which was posted in January
2007 on the ILMA Web site and linked to from the OSHA and ILMA Alliance Web page on the OSHA Web
site.
- Through the Alliance, ILMA developed "Metalworking Fluids in Small Business: A Health and
Safety "QUICKSTART" Guide" to help small businesses and their employees manage the health, safety
and environmental impacts of metalworking fluids. It was posted in September 2005 on ILMA's Web
site and linked to from the OSHA and ILMA Alliance Web page on the OSHA Web site.
- Through the Alliance, ILMA published the article "Making the Business Case for Safety and
Health" by former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA in its monthly publication,
Compoundings, and weekly electronic newsletter, FLASHPoint.
- Through the Alliance, ILMA published articles about the OSHA and ILMA Alliance and its products
as well as the Agency's compliance assistance products and activities in its monthly publication,
Compoundings, and weekly electronic newsletter, FLASHPoint.
- ILMA representatives serve on the editorial boards for the Making the Business Case for Safety
and Health and the Metalworking Fluids Safety and Health Topics pages on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and
health:
- On February 1, 2007, ILMA representatives participated in the Alliance Program's Small Business
Roundtable in Washington, DC. During the meeting, Alliance Program participants reviewed
promotional materials and tools that OSHA designed in response to the recommendations made during
the Roundtable meeting on September 8, 2006.
- On October 26, 2006, ILMA representatives participated in the OSHA Alliance Program Hazard
Communication Roundtable's Promoting the Globally Harmonized System for Classification and
Labeling of Chemicals (GHS) Workgroup in Washington, D.C. Workgroup participants identified
compliance assistance tools and products to educate the public, particularly small businesses,
about the GHS. They also provided recommendations on the target audiences, subjects and formats of
and methods for distributing the information.
- On September 8, 2005, ILMA representatives participated in the Alliance Program's Small
Business Roundtable, in Washington, D.C. During the meeting, Alliance Program participants
provided a number of recommendations for OSHA on how to enhance its small business compliance
assistance activities and resources.
- On August 1, 2005, ILMA representatives participated in the OSHA Alliance Program Hazard
Communication Roundtable's Promoting the Globally Harmonized System (GHS) for Classification and
Labeling of Chemicals Workgroup meeting in Washington, D.C. The workgroup identified a number of
compliance assistance tools that it could develop to support OSHA's plans to adopt the GHS as part
of its Hazard Communication Standard.
- On May 2, 2005, former-Acting Assistant Secretary Jonathan L. Snare, USDOL-OSHA gave a keynote
address to OSHA and Alliance Program participants and other safety and health representatives at
the 2005 North American Occupational Safety and Health (NAOSH) Week Kick-Off event at the U.S.
Department of Labor in Washington D.C. NAOSH Week, sponsored annually by the ASSE and the Canadian
Society of Safety Engineering, focuses on the importance of preventing injuries and illnesses in
the workplace. ILMA, along with a number of other Alliance Program participants, supported the
Week.
- On September 8, 2005, ILMA representatives participated in the Alliance Program's Small
Business Roundtable, in Washington, D.C. During the meeting, Alliance Program participants
provided a number of recommendations for OSHA on how to enhance its small business compliance
assistance activities and resources.
- On February 15, 2005, ILMA representatives participated in the Alliance Program's Hazard
Communication Roundtable in Washington, D.C. During the meeting, Alliance Program participants
discussed hazard communication compliance assistance projects and activities they could work on
together. ILMA representatives also participate in the Roundtable's Promoting the Globally
Harmonized System for Classification and Labeling of Chemicals Workgroup.
-- As of October 2007.
Back to Top
Industrial Truck Association
Through the Alliance, OSHA and the Industrial Truck Association (ITA)
encourage employers to increase employer and employee access to safety and health information and
training resources on the operation and use of powered industrial trucks and to assist employers and
employees in reducing and preventing exposure to potential hazards associated with the use of
powered industrial trucks in general and in warehouses in particular.
To meet the outreach and communication goals of the Alliance:
- Through the Alliance, OSHA and ITA developed an "Industrial Truck Best Practices Seminar" that
discusses applying industrial truck material handling techniques, recognizing safe load capacity
and other workplace safety and health topics. More than 90 attendees participated in the following
seminars:
- October 25, 2007 in East Longmeadow, Massachusetts,
- October 23, 2007 in Lawrence, Massachusetts,
- October 11, 2007 in Cleveland, Ohio,
- March 29, 2007 in Cranberry Township, Pennsylvania,
- March 27, 2007 St. Louis, Missouri,
- November 2, 2006 Mechanicsburg, Pennsylvania,
- February 9, 2006 in Tampa, Florida.
- On September 27, 2006, then-Acting Deputy Assistant Secretary Steven Witt, USDOL-OSHA gave a
keynote address at the ITA Annual Meeting in West Palm Beach, Florida.
- On March 16, 2005, Paula White, Director, Directorate of Cooperative and State Programs,
USDOL-OSHA gave a presentation on OSHA's cooperative and compliance assistance programs at ITA's
Board of Directors Meeting in Washington, D.C.
- On October 25, 2004, former-Assistant Secretary John Henshaw, USDOL-OSHA gave a keynote address
on OSHA's cooperative programs at ITA's 2004 Annual Meeting in Miami, Florida.
- Through the Alliance, ITA provided input into the development of OSHA's "Sample Daily
Checklists for Powered Industrial Trucks," which was posted on the Powered Industrial Trucks
Safety and Health Topics page on the OSHA Web site in September 2004.
- ITA members serve on the editorial board for the Powered Industrial Trucks Safety and Health
Topics page on the OSHA Web site.
-- As of October 2007.
Back to Top
ISSA
The OSHA and ISSA Alliance works to provide the association's members and
others, including small businesses and general industry, with information, guidance, and access to
training resources that will help them protect employees' health and safety. The Alliance
particularly focuses on hazards in the cleaning, maintenance and warehousing industries, such as
slips, trips and falls and hazard communication (HAZCOM) (e.g., hazard classification, precautionary
labeling, material safety data sheets and personal protective equipment).
To meet the outreach and communication goals of the Alliance:
- On May 5, 2008, Deputy Assistant Secretary Donald Shalhoub, USDOL-OSHA spoke to OSHA staff,
Alliance Program participants and other safety and health professionals during the 2008 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. The theme for the 2008
NAOSH Week was "Safety is Good Business." The ISSA Alliance, along with a number of other Alliance
Program participants, supported the Week.
- On October 23-26, 2007, ISSA/INTERCLEAN® 2007 Educational Conference was held in Orlando,
Florida. On October 26, 2007, Carol Jones, then Acting Director, Office of Biological Hazards,
Directorate of Standards and Guidance, USDOL-OSHA presented "Pandemic Preparedness." Bill Willson,
Program Analyst, Office of Outreach Services and Alliances, Directorate of Cooperative and State
Programs, USDOL-OSHA staffed an Alliance Program exhibit booth.
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to OSHA staff,
Alliance Program participants and other safety and health professionals during the 2007 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. ISSA along with a number
of other Alliance Program participants supported the Week.
- On April 5, 2007, Earl Hicks, Program Analyst, Office of Outreach Services and Alliances,
Directorate of Cooperative and State Programs, USDOL-OSHA and Ryan Tremain, Program Analyst,
Office of Outreach Services and Alliances, Directorate of Cooperative and State Programs,
USDOL-OSHA staffed an Alliance Program exhibit booth at the ISSA Legislative and Regulatory Forum
in Arlington, Virginia.
- On October 5-7, 2006, ISSA/INTERCLEAN® 2006 was held in Chicago, Illinois. On October 4, 2006,
Ann Williams, Team Leader, Region V, USDOL-OSHA gave a presentation during the seminar, "Update:
Globally Harmonized System of Labeling - U.S. Implementation by OSHA, EPA, and DOT
Representatives." Rick Harris, then Program Analyst, Office of Outreach Services and Alliances,
Directorate of Cooperative and State Programs, USDOL-OSHA; Bill Coulehan, Compliance Assistance
Specialist, Region V, Calumet City, Illinois Area Office, USDOL-OSHA; and Wanda Adams, Industrial
Hygiene Consultant, On-site Consultation, Illinois Department of Commerce and Economic Opportunity
staffed an Alliance Program exhibit booth.
- Through the Alliance, ISSA publishes articles about the OSHA and ISSA Alliance and the Agency's
compliance assistance products and activities in its monthly e-newsletter, Legislative and
Regulatory Update.
- Through the Alliance, in July 2006 ISSA posted the ISSA Safety and Health Portal on its Web
site, which includes Occupational Safety and Health Topics Pages on Bloodborne Pathogens, Cleaning
Chemicals in the Workplace (Hazard Communication), Personal Protective Equipment (PPE), Injury &
Illness Recordkeeping and Slips, Trips and Falls in the Workplace. A Small Business Resources page
was added in April 2008. The portal is posted on the ISSA Web site and linked to from the OSHA and
ISSA Alliance Web page on the OSHA Web site.
- Through the Alliance, ISSA developed an article "Preventing Slips, Trips and Falls for
Custodians" and a checklist "Minimizing Slips, Trips and Falls" which were posted in April 2007 on
the ISSA Safety and Health Portal and linked to from the OSHA and ISSA Alliance Web page on the
OSHA Web site.
- ISSA representatives helped develop and serve on the editorial board of the OSHA Assistance for
the Cleaning Industry Safety and Health Topics page on the OSHA Web site.
- ISSA representatives serve on the editorial boards for the following Safety and Health Topics
pages on the OSHA Web site: Powered Industrial Trucks and Walking/Working Surfaces.
To meet the goals of promoting the national dialogue on workplace safety and
health:
- On October 26, 2006, ISSA representatives participated in the OSHA Alliance Program Hazard
Communication Roundtable's Promoting the Globally Harmonized System for Classification and
Labeling of Chemicals (GHS) Workgroup in Washington, D.C. Workgroup participants identified
compliance assistance tools and products to educate the public, particularly small businesses,
about the GHS. They also provided recommendations on the target audiences, subjects and formats of
and methods for distributing the information.
-- As of June 2008.
Back to Top
The Joint
Commission and Joint Commission Resources
OSHA's Alliance with The Joint Commission and Joint Commission Resources (The
Joint Commission/JCR) provides health care workers and others in the health care industry with
information, guidance and access to training resources to help them protect employees' health and
safety. The organizations work together to specifically address reducing and preventing exposure to
biological and airborne hazards in health care, and addressing emergency preparedness, ergonomics
and workplace violence issues.
To meet the outreach and communication goals of the Alliance:
- On October 11, 2007, the Annual Emergency Preparedness Conference: Preparing for the Unknown:
"Are You Ready?" was held in Alexandria, Virginia. Edwin G. Foulke Jr.,
former-Assistant Secretary, USDOL-OSHA presented an update on the OSHA and Joint Commission/JCR Alliance and OSHA
representatives staffed an Alliance Program exhibit booth.
- On September 6, 2007, Kay Dellinger, Medical Officer, Office of Occupational Health Medicine,
Directorate of Science, Technology and Medicine, USDOL-OSHA presented "Increasing Seasonal
Influenza Vaccination Rates in Healthcare Workers" and discussed the OSHA and The Joint Commission
/JCR Alliance during the Health Care Worker Influenza Vaccination Protocols Audio Conference.
- On August 20, 2007, Don Wright, M.D., then Director, Office of Occupational Medicine,
Directorate of Science, Technology and Medicine, USDOL-OSHA gave a presentation on pandemic flu at
the Annual Infection Prevention and Control Conference in Chicago, Illinois.
- On October 19, 2006, the 2nd Annual Emergency Preparedness Conference: Disaster Readiness on
the Home Front was held in Washington, D.C. Edwin G. Foulke, Jr., former-Assistant Secretary, USDOL-OSHA
provided opening remarks and an OSHA update. Don Wright, M.D., then Director, Office of
Occupational Medicine, Directorate of Science, Technology and Medicine, USDOL-OSHA was the
conference moderator; Thomas Galassi, Deputy Director, Directorate of Enforcement Programs,
USDOL-OSHA presented "OSHA/JCAHO Emergency Management Standards"; John Piacentino, then Medical
Officer, Office of Occupational Medicine, Biological Specialized Response Team, Directorate of
Science, Technology and Medicine, USDOL-OSHA presented "Pandemic Flu: Pandemic Preparedness and
Response-Guidance for Healthcare Workers and Healthcare employees." OSHA representatives staffed
an Alliance Program exhibit booth.
- On January 25, 2006, The Joint Commission/JCR and the American Heart Association, another
Alliance Program participant, sponsored the American Heart Association's New Guidelines for
Cardiopulmonary Resuscitation (CPR) and Emergency Cardiovascular Care (ECC) Audio/Web Conference.
- On October 6-7, 2005, The Joint Commission/JCR held the National Conference for Hospital-Based
First Receivers in Washington, D.C. On October 6, 2005, David Ippolito, Director, Office of
Science and Technological Assessment, Directorate of Science , Technology and Medicine, USDOL-OSHA
participated in a "Question and Answer Session on OSHA's Best Practices for Hospital-Based First
Receivers"; Sven J. Rundman III, Senior Industrial Hygienist, Office of Health Enforcement,
Directorate of Enforcement, USDOL-OSHA presented "Hazwoper and Other OSHA Standards Applicable to
Hospitals"; Patricia Bray, M.D., Medical Officer, Office of Occupational Medicine, Directorate of
Science, Technology and Medicine, USDOL-OSHA and John Piacentino, M.D., then Medical Officer,
Office of Occupational Medicine, Directorate of Science, Technology and Medicine, USDOL-OSHA
participated on a panel "Medical Monitoring of First Receivers"; and Don Wright, M.D., then
Director, Office of Occupational Medicine, Directorate of Science , Technology and Medicine,
USDOL-OSHA presented, "Making OSHA and Joint Commission Work for You…Together!"
- Through the Alliance, The Joint Commission/JCR representatives provided input during the
development of the Agency's "OSHA Best Practices for Hospital-Based First Receivers of Victims,"
which was posted on the OSHA Web site in 2005.
- Through the Alliance, OSHA provided input to the "OSHA & Worker Safety" column that is
published in the JCR monthly newsletter, Environment of Care® News for health care worker safety
and health.
- Through the Alliance, OSHA provided input during the development of the JCR and the American
Hospital Association book, Total Health and Safety for Healthcare Facilities:
Catalyzing Improvements in Employee Safety, Patient Care, and the Bottom Line, which was
published August 2006.
--As of January 2008.
Back to Top
Laser Institute of America
The OSHA and Laser Institute of America (LIA) Alliance provides the
organization's members and others, including small businesses, with information, guidance and access
to training resources that will help them protect employees' health and safety, particularly in
reducing and preventing exposure to laser beam and non-beam hazards in industrial and medical
workplaces.
To meet the training and education goals of the Alliance:
- Through the Alliance, OSHA and LIA developed a 4-hour training course, "Laser Safety Officer
Training," which discusses the safe use of lasers in the workplace. Rich Greene, Education
Director, LIA presented the course on:
- October 11, 2006 in Millbury, Massachusetts
- September 14, 2006 in Kansas City, Missouri
- September 13, 2006 in Higgins Lake, Michigan
To meet the outreach and communication goals of the Alliance:
- On May 5, 2008, Deputy Assistant Secretary Donald Shalhoub, USDOL-OSHA, spoke to OSHA staff,
Alliance Program participants and other safety and health professionals during the 2008 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. The theme for the 2008
NAOSH Week was "Safety is Good Business." The LIA Alliance, along with a number of other Alliance
Program participants, supported the Week.
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to OSHA staff,
Alliance Program participants and other safety and health professionals during the 2007 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. LIA along with a number
of other Alliance Program participants supported the Week.
- On March 19-22, 2007, LIA members distributed OSHA Alliance Program information from the LIA
exhibit booth at the 2007 International Laser Safety Conference in San Francisco, California.
- Through the Alliance, OSHA reviewed and provided comments on the LIA developed, "Laser Hazards"
Podcast, which was posted on the LIA Web site in August 2006 and linked to from the OSHA and LIA
Alliance Web page on the OSHA Web site.
- Through the Alliance, LIA developed the Laser Safety Information Bulletin, which was posted on
the LIA Web site in September 2006 and linked to from the OSHA and LIA Alliance Web page on the
OSHA Web site.
- LIA representatives serve on the editorial boards for the following Safety and Health Topics
pages on the OSHA Web site: Construction – Laser Hazards, Laser/Electrosurgery Plume, Laser
Hazards, and Non-ionizing Radiation.
-- As of June 2008.
Back to Top
National Association of Home Builders
The OSHA and National Association of Home Builders (NAHB) Alliance provides
members and others in the residential construction industry, including non-English and limited-
English-speaking employees and trade contractors, with information, guidance and access to training
resources to help them protect employees' health and safety. In particular, the Alliance focuses on
addressing fall, electrical, struck-by, and caught in/between safety hazards.
To meet the outreach and communication goals of the Alliance:
- On April 10, 2008, Rob Matuga, NAHB, joined with other Alliance Program participants and
attended the Office of Partnership and Recognition's OSHA Challenge Webinar.
- On April 21, 2008, former-Secretary Elaine L. Chao, U.S. Department of Labor and
former-Assistant Secretary
Edwin G. Foulke, Jr., USDOL-OSHA spoke at the kick-off event for the OSHA 2008 Teen Summer Job
Safety Campaign, "Build a Safe Work Foundation," at Rockefeller Plaza, New York City, New York. In
addition, Alliance Program participants Fred Humphries, President and Chief Executive Officer,
Home Builders Institute, National Association of Homebuilders (NAHB) and Tim Lawrence, Executive
Director, SkillsUSA addressed the attendees. Former-Secretary Chao launched the Campaign during an
appearance on NBC's TODAY show. Teen workers from Alliance Program participant SkillsUSA
demonstrated safe work practices for typical summer jobs for teens. NAHB and Independent
Electrical Contractors, Inc., another Alliance Program participant, helped staff an OSHA exhibit
booth. The Teen Summer Job Safety Campaign is a multi-year project dedicated to increasing
awareness about workplace hazards and providing information about the hazards to young workers and
their parents.
- On May 5, 2008, Deputy Assistant Secretary Donald Shalhoub, USDOL-OSHA spoke to OSHA staff,
Alliance Program participants and other safety and health professionals during the 2008 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. The theme for the 2008
NAOSH Week was "Safety is Good Business." Kevin Cannon, Safety Specialist, NAHB, attended and
represented NAHB, which, along with a number of other Alliance Program participants, supported the
Week.
- On February 13-16, 2008, Veneta Chatmon, Exhibits and Meeting Specialist, Office of
Communications, USDOL-OSHA staffed an OSHA exhibit booth at the 2008 International Builders Show
in Orlando, Florida.
- Through the Alliance, OSHA and NAHB developed the "How to Build a House" Seminar. More than 100
OSHA federal and state representatives have attended the seminar, which was given on:
- November 1, 2007 in Laurel, Maryland.
- October 5, 2006 in Elyria, Ohio.
- May 26, 2006 in Indianapolis , Indiana.
- November 15, 2005 in Red Bank, New Jersey.
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to OSHA staff,
Alliance Program participants and other safety and health professionals during the 2007 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. NAHB along with a number
of other Alliance Program participants supported the Week.
- On April 17, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA and key construction
industry stakeholders launched the OSHA 2007 Teen Summer Job Safety Campaign,
"Build a Safe Work
Foundation" at the Thomas Edison High School of Technology in Silver Spring, Maryland. The focus
of the 2007 campaign was avoiding construction hazards. Rob Matuga Director, Labor, Safety and
Health Regulatory Affairs, NAHB and Kevin Cannon Safety Specialist, NAHB attended and represented
NAHB, which, along with a number of other Alliance Program participants, supported the campaign.
Kevin Cannon, along with a number of other Alliance Program participants, supported the Week.
- On February 7-10, 2007, the International Builders' Show was held in Orlando, Florida. On
February 8, 2007, Steven F. Witt, then Director, Directorate of Construction, USDOL-OSHA
participated in the NAHB Safety and Health Committee meeting. Veneta Chatmon, Exhibits and Meeting
Specialist, Office of Communications, USDOL-OSHA staffed an OSHA exhibit booth.
- On February 4, 2007, Edwin G. Foulke, Jr., former-Assistant Secretary, USDOL-OSHA updated attendees
about the OSHA Alliance Program and the activities of the OSHA and NAHB Alliance at the NAHB
Executive Board Meeting in Orlando, Florida.
- On November 8, 2006, Stew Burkhammer, then Director, Office of Construction Services,
Directorate of Construction, USDOL-OSHA and Rob Matuga, Director, Labor, Safety and Health
Regulatory Affairs, NAHB spoke about training products developed through the OSHA and NAHB
Alliance in the workshop, "Training for Residential Construction: OSHA & NAHB," at the 2006
National Safety Congress & Expo in San Diego, California.
- On January 9, 2006, Bruce Swanson, then Director, Directorate of Construction, USDOL-OSHA
updated attendees about OSHA's cooperative programs and compliance assistance resources during the
NAHB's Construction Safety & Health Committee meeting at the 2006 International Builders Show in
Orlando, Florida.
- On September 22, 2005, Lee Anne Jillings, Director, Office of Outreach Services and Alliances,
Directorate of Cooperative and State Programs, USDOL-OSHA and Rob Matuga, Director, Labor, Safety
and Health Regulatory Affairs, NAHB presented a workshop, "Construction Related Safety and Health
Training" at the National Safety Council's 2005 National Safety Congress & Expo in Orlando,
Florida.
- On November 5, 2004, Clyde Payne, Area Director, Region IV, Jackson, Mississippi Area Office,
USDOL-OSHA; Rob Matuga, Director, Labor, Safety & Health Regulatory Affairs, NAHB; Benny J.
Pritchett, Home Builders Association of Alabama; and Leon Greaser, Wichita Area Builders
Association participated in a Construction Safety Breakout Session, "Construction Safety Resources
You and Your Members Can Really Use" and updated attendees on the OSHA Alliance Program, in
particular the OSHA and NAHB Alliance, at the NAHB State and Local Government Affairs Conference
in Biloxi, Mississippi.
- On August 24, 2004, George Middleton, then-Program Manager, Labor, Safety & Health Regulatory
Affairs, NAHB, gave a presentation on the association's Hispanic outreach programs at a meeting of
OSHA's Hispanic Subgroup in Denver, Colorado.
- Through the Alliance, NAHB provided OSHA National, Regional and Area offices, State Plan States
and On-site Consultation Program staff with copies of its handbooks on scaffolding, safety tool
kits and jobsite safety.
- Through the Alliance, NAHB publishes articles about the OSHA and NAHB Alliance and the Agency's
compliance assistance products and activities in its weekly e-Newsletter, Nations
Building News.
- NAHB representatives helped develop and serve on the editorial board of the OSHA Assistance for
the Residential Construction Industry Safety and Health Topics page on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and health:
- On January 30, 2008, NAHB representatives participated in the second Alliance Program
Construction Roundtable in Washington, D.C. During the meeting, Alliance Program participants
discussed products developed through the Roundtable and identified potential projects and
compliance assistance resources to help address safety and health hazards in the construction
industry. NAHB representatives are participating in the Roundtable's Fall Protection and Design
for Safety Workgroups.
- On October 26, 2006, NAHB representatives participated in the OSHA Alliance Program Hazard
Communication Roundtable's Promoting the Globally Harmonized System for Classification and
Labeling of Chemicals (GHS) Workgroup in Washington, D.C. Workgroup participants identified
compliance assistance tools and products to educate the public, particularly small businesses,
about the GHS. They also provided recommendations on the target audiences, subjects and formats of
and methods for distributing the information.
- On July 8, 2004, NAHB representatives participated in the Alliance Program's Construction
Roundtable in Washington, D.C. During the meeting, construction-related Alliance Program
participants discussed working together to identify potential Alliance-related projects for the
construction industry. NAHB representatives are participating in the Roundtable's Fall Protection
and Design for Safety Workgroups.
-- As of June 2008.
Back to Top
National
Maritime Safety Association
Through the OSHA and National Maritime Safety Association (NMSA) Alliance, the organizations work
together to provide the association's members and others in the marine cargo handling industry with
information, guidance and access to training resources that will help them protect employees' health
and safety. The Alliance particularly focuses on intermodal container lashing issues and marine
terminal traffic safety.
To meet the outreach and communication goals of the Alliance:
- On March 28, 2008, Alan Traenkner, Director, Analysis and Evaluation, Region IX, San Francisco,
California Area Office, USDOL-OSHA presented "OSHA Update and Alliances" during the NMSA Annual
Meeting in San Diego, California.
- On June 27-28, 2007, the NMSA Annual Meeting was held in Seattle, Washington. On June 28, 2007,
Richard Terrill, Regional Administrator, Region X, Seattle, Washington Regional Office, USDOL-OSHA
updated the meeting attendees on OSHA activities. Also on June 28, 2007, Amanda Edens, Deputy
Director, Directorate of Standards and Guidance, USDOL-OSHA; Charles Lemon, Safety and Health
Professional, Washington State Department of Labor and Industries; James Thornton, Chairperson,
Maritime Advisory Committee on Occupational Safety and Health (MACOSH); and John Cushing,
Commander, United States Coast Guard participated in the "Safety Leadership from the Government
Perspective" panel discussion.
- On March 14, 2007, Roger Banaitis, Safety and Health Manager, Region VI, Dallas, Texas Regional
Office, USDOL-OSHA updated attendees on the powered industrial truck standards (e.g. forklifts)
along with the marine terminal/longshoring enforcement programs at the NMSA Technical Committee
Meeting in Houston, Texas.
- On September 13, 2006, Carl Halgren, then Area Director, Region X, Portland, Oregon Area
Office, USDOL-OSHA updated attendees on the OSHA Alliance Program and activities of the OSHA and
NMSA Alliance at the NMSA Technical Committee Meeting, Vancouver, Washington.
- On June 21-23, 2006, the NMSA Annual Meeting was held in Charleston, South Carolina. On June
22, 2006, Jim Maddux, then Director, Office of Maritime Standards, Directorate of Standards and
Guidance, USDOL-OSHA made a presentation and discussed OSHA's concerns regarding marine cargo
handling facilities. On June 23, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA gave a
presentation on the OSHA Alliance Program. Following his speech, Mr. Foulke signed the OSHA and
NMSA Alliance agreement.
--As of June 2008.
Back to Top
National Safety Council
OSHA and the National Safety Council (NSC) work together to improve health and
safety in the general and construction industries and to provide the nation's employers and
employees, including small businesses and Hispanic and youth workers, with information, guidance and
access to training resources. In particular, the Alliance focuses on helping to reduce traffic
collisions and related worker deaths and injuries and provide first aid, Cardiopulmonary
Resuscitation (CPR) and Automated External Defibrillator (AED) training in the workplace.
To meet the outreach and communication goals of the Alliance:
- On June 6, 2007, NSC participated in Department of Labor's Safety Day in Washington, D.C. NSC
had an exhibit booth during the event.
- November 6-8, 2006, the 2006 National Safety Congress and Expo was held in San Diego,
California. On November 6, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA gave a
keynote presentation about OSHA's initiatives and its balanced approach to achieving the Agency's
goals. Veneta Chatmon, Exhibits and Meeting Specialist, Office of Communications, USDOL-OSHA and
Earl Hicks, Program Analyst, Office of Outreach Services and Alliances, Directorate of
Cooperative and State Programs, USDOL-OSHA staffed an OSHA exhibition booth. In addition, OSHA
speakers and Alliance Program participants presented 12 workshops.
- On June 7, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA gave a presentation
promoting June 2006 as NSC's National Safety Month at the Department of Labor's Safety Day. NSC
had an exhibit booth during the event.
- On June 7, 2006, NSC participated in Department of Labor Safety Day in Washington D.C. NSC had
an exhibit booth during the event.
- On September 18-22, 2005, the XVII World Congress on Safety and Health at Work was held in
Orlando, Florida. On September 21, 2005, Jonathan L. Snare, former-Acting Assistant Secretary, USDOL-OSHA gave the Occupational Keynote Address during which he updated attendees on OSHA's
recent activities. Following his speech, Mr. Snare signed the OSHA and NSC Alliance renewal
agreement. Robert Nester, Occupational Health Nurse, Office of Occupational Health Nursing,
Directorate of Science, Technology and Medicine, USDOL-OSHA helped present a workshop, "Young
Workers in the U.S.: The Injury Problem and Promising Prevention Strategies." Veneta Chatman,
Exhibits and Meetings Specialist, Office of Communications, USDOL-OSHA staffed an OSHA exhibit
booth.
- On September 21-23, 2005, the 2005 National Safety Congress & Expo was held in Orlando,
Florida. On September 21, 2005, Jonathan L. Snare, former-Acting Assistant Secretary, USDOL-OSHA
gave the Occupational Keynote Address during which he updated attendees on OSHA's recent
activities. Following his speech, Mr. Snare signed the OSHA and NSC Alliance renewal. OSHA
speakers and Alliance Program participants presented 12 workshops. In addition, Veneta Chatman,
Exhibits and Meetings Specialist, Office of Communications, USDOL-OSHA staffed an OSHA exhibit
booth.
- On September 13-15, 2004, the NSC Congress and Expo was held in New Orleans, Louisiana. On
September 13, 2004, John Henshaw, former-Assistant Secretary, USDOL-OSHA gave the Occupational
Keynote Address during which he updated attendees on OSHA's recent activities. Veneta Chatman,
Exhibits and Meetings Specialist, Office of Communications, USDOL-OSHA staffed an OSHA exhibit
booth. In addition, OSHA speakers and Alliance Program participants presented more than five
workshops.
- On September 8-10, 2003, the NSC Congress and Expo was held in Chicago, Illinois. On September
9, 2003, John Henshaw, former-Assistant Secretary, USDOL-OSHA gave the Occupational Keynote Address
during which he updated the attendees on OSHA's recent activities. Following his speech, Mr.
Henshaw signed the OSHA and NSC Alliance. Veneta Chatman, Exhibits and Meetings Specialist,
Office of Communications, USDOL-OSHA staffed an OSHA exhibit booth. In addition, OSHA speakers
and Alliance Program participants presented more than 10 workshops.
- In 2003, NSC distributed to its members a packet of information on forklift safety prepared by
OSHA, the National Institute for Occupational Safety and Health (NIOSH) and the Department of
Labor's Wage and Hour Division. The information packet included OSHA's Safety and Health
Information Bulletin, "Protecting Young Workers: Prohibition Against Young Workers Operating
Forklifts"; NIOSH's "Forklift Alert"; the Wage and Hour Division's "Forklift Stop Sticker"; and a
DOL Compliance Assistance Fact Sheet.
- NSC representatives serve on the editorial boards for 20 of OSHA's Safety and Health Topics
pages, which are posted on the OSHA Web site.
- NSC representatives serve on the editorial boards for seven of OSHA's eTools, which are posted
on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and
health:
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to the OSHA and
Alliance Program participants and other safety and health professionals during the 2007 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Bobby Jackson, then Senior Vice President, National Programs, NSC and
William O'Connell Executive Director, Government Affairs, NSC attended the event and represented
NSC. Sponsored annually by the American Society of Safety Engineers (ASSE), an Alliance Program
participant, and the Canadian Society of Safety Engineering, the Week focuses on the importance
of preventing injuries and illnesses in the workplace. NSC, along with a number of other Alliance
Program participants, supported the Week.
- On May 1, 2006, Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to OSHA and
Alliance Program participants and other safety and health professionals during the 2006 North
American Occupational Safety and Health (NAOSH) Week Kick-Off event at the U.S. Department of
Labor in Washington, D.C. Bobby Jackson, then Senior Vice President, National Programs, NSC
attended the event and represented NSC. NAOSH Week, sponsored annually by the American Society of
Safety Engineers (ASSE), an Alliance Program participant, and the Canadian Society of Safety
Engineering focuses on the importance of preventing injuries and illnesses in the workplace. NSC,
along with a number of other Alliance Program participants, supported the Week.
- On September 8, 2005, NSC representatives participated in the Alliance Program's Small
Business Roundtable in Washington, D.C. During the meeting, Alliance Program participants
provided a number of recommendations to OSHA on how to enhance its small business compliance
assistance activities and resources.
- On May 3, 2005, John Ulczycki, then Director, Transportation Safety Group, NSC, spoke to OSHA
and Alliance Program participants and other safety and health professionals about teen driver
safety during the 2005 North American Occupational Safety and Health (NAOSH) Week Kick-Off event
at the U.S. Department of Labor in Washington, D.C. NAOSH Week, sponsored annually by the
American Society of Safety Engineers (ASSE), an Alliance Program participant, and the Canadian
Society of Safety Engineering focuses on the importance of preventing injuries and illnesses in
the workplace. NSC, along with a number of other Alliance Program participants, supported the
Week.
-- As of August 2007.
Back to Top
National Shipbuilding Research Program
OSHA and the National Shipbuilding Research Program (NSRP), along with the
American Shipbuilding Association (ASA) and the Shipbuilders Council of America (SCA) work together
to provide information and guidance to help protect shipyard employees' health and safety by
minimizing or eliminating exposure to shipyard safety and health hazards.
To meet the outreach and communication goals of the Alliance:
- NSRP, SCA and ASA worked with OSHA and members of the Agency's Strategic Partnerships in
Region III (South Tidewater Association of Ship Repairers), Region VI (SCA) and Region IX (Port
of San Diego Ship Repair Association) to develop the storyboard and script for the second
computer-animated hazard-awareness video based on actual shipyard fatalities. In April 2005, over
400 copies of the video were distributed to NSRP, SCA and ASA members and non-members and the
members of the Strategic Partnerships. On September 23, 2005, Steve Butler, Director, Office of
Maritime Enforcement, USDOL-OSHA promoted the video during the Film & Multimedia presentations at
the XVIIth World Congress on Safety and Health at Work and 2005 National Safety Council Congress
& Expo, which was held September 17-23, 2005 in Orlando, Florida.
- On September 21, 2004, John Miles, then Region VI Administrator, Dallas, Texas, USDOL-OSHA
discussed the application process, requirements and benefits of VPP from both the industry and
government perspectives at a Voluntary Protection Programs (VPP) Seminar sponsored by the OSHA
and NSRP, ASA, and SCA Alliances for members of the maritime industry at Northrop Grumman Ship
Systems-Avondale Operations in Pascagoula, Louisiana.
- On September 13, 2004, Tom Pope, then Area Director, Region III, Norfolk, Virginia Area
Office, USDOL-OSHA; Jim Thornton, Director, Environment, Health & Safety, Northrop Grumman
Newport News (NSRP/ASA); and Captain Teresa Preston, Director, Safety, Environment & Quality,
Atlantic Marine, Inc. (SCA) presented a workshop, "Shipyard Alliances with OSHA," at the National
Safety Council's Congress and Expo in New Orleans, Louisiana.
- Through the Alliance, members of NSRP, ASA and SCA worked with members of the American
Industrial Hygiene Association (AIHA), another Alliance Program participant, to develop "Safety
Alert: Deadly Hydrogen Sulfide and Shipyard Sewage" which was posted in July 2006 on the AIHA Web
site and linked to the OSHA and AIHA Alliance Web page on the OSHA Web site.
- Through the Alliance, NSRP, ASA and SCA representatives helped develop the Barge Cleaning,
Fire Protection, Ship Building and Ship Breaking modules and serve on the editorial board for
OSHA's Shipyard Employment eTool, which is posted on the OSHA Web site.
- NSRP, ASA and SCA members serve on the editorial boards for the Maritime Industry and
Shipbuilding and Repair Safety and Health Topics pages on the OSHA Web site.
-- As of August 2007.
Back to Top
National Shooting Sports Foundation and the Sporting Arms and Ammunition Manufacturers' Institute, Inc.
Through the OSHA and National Shooting Sports Foundation (NSSF) and the Sporting Arms and
Ammunition Manufacturers' Institute, Inc., (SAAMI) Alliance, the organizations work to develop
information and guidance for member and non-member shooting ranges to help enhance employee safety
programs, including methods and procedures to minimize airborne pollutants in the work environment
and control and prevent exposure to other hazards in their facilities.
To meet the training and education goals of the Alliance:
- Through the Alliance, NASR developed and published a manual, Lead Management and
OSHA Compliance for Indoor Shooting Ranges for range owners and operators.
- Through the Alliance, NASR developed and published a brochure Hearing Protection
& the Shooting Sports.
To meet the outreach and communication goals of the Alliance:
- In its summer 2006 edition, The Range Report, a publication of the National Shooting Sports
Foundation, contained an article, "Alliance Promotes Safe Working Conditions at Shooting Ranges."
- On February 9-12, 2006, the 2006 SHOT Show: The Shooting, Hunting, Outdoor Trade Show and
Conference was held in Las Vegas, Nevada. Ronald Parker, Supervisor, Industrial Hygiene, and Michael
Behling, Industrial Hygienist, Nevada – Occupational Safety and Health Administration; and Tania
Charette, Trainer, Art Sipple, Industrial Hygienist, and Todd Schultz, Safety Consultant, Nevada -
Safety Consultation and Training Section staffed an Alliance Program exhibit booth. On February 10,
2006, SHOT Daily published "NASR/SAAMI and OSHA Alliance."
- On January 28-31, 2005, the 2005 SHOT Show: The Shooting, Hunting, Outdoor Trade Show and
Conference was held in Las Vegas, Nevada. On January 29, 2005, Ira Wainless, Industrial Hygienist,
Office of Science and Technology Assessment, Directorate of Science, Technology and Medicine,
USDOL-OSHA; Ronald Parker, Industrial Hygiene Supervisor, Nevada-OSHA; Todd Shultz, Safety
Specialist, Nevada-OSHA Safety Consultation and Training Section and Bradley King, National
Institute for Occupational Safety and Health participated in a panel discussion, "Airborne Lead
Management". Representatives from the Agency's National Office, Nevada OSHA and NVOSHA's Safety and
Consultation Training Section staffed an Alliance Program exhibit booth.
-- As of February 2007.
Back to Top
National Telecommunications Safety Panel
The OSHA and National Telecommunications Safety Panel (NTSP) Alliance focuses on providing
telecommunications employees with information, guidance and access to training resources and sharing
best practices and technical knowledge to address ergonomic issues in the telecommunications
industry.
To meet the outreach and communication goals of the Alliance:
- On September 18, 2007, David Goldsheyder, Ergonomist, Region II, New York City, New York,
USDOL-OSHA gave a presentation on OSHA's ergonomic-related compliance assistance products and
resources and technical information at the 2007 International Telecommunications Safety
Conference in Niagara Falls, New York.
- On September 19, 2006, the 2006 International Telecommunications Safety Conference was held in
Little Rock, Arkansas. Brett Besser, Ergonomist, Salt Lake Technical Center, Directorate of
Science, Technology and Medicine, USDOL-OSHA gave a presentation on OSHA's cooperative programs
that included information on the Agency's ergonomic-related Alliances and Strategic Partnerships
with the United States Postal Service and the National Parks Service. Representatives from the
OSHA Region VI, Little Rock, Arkansas, Area Office attended the conference.
- On June 29, 2006, Eric Allgaier, Group Manager, Environmental Health and Safety, Sprint Nextel
gave a presentation about the OSHA and NTSP Alliance at the Sprint Safety and Security Day in
Reston, Virginia.
- On March 6, 2006, Marie Robinson, Ergonomist, AT&T discussed the OSHA and NTSP Alliance as
part of her presentation during the "Advanced Office Ergonomics: A Macroergonomics Perspective"
Workshop at the 2006 Applied Ergonomics Conference in Lake Buena Vista, Florida.
- On October 3, 2005, Frank Bannister, Environmental Health and Safety Programs and Ergonomics
Manager, Sprint Nextel gave a presentation on the OSHA and NTSP Alliance to students attending a
senior-level ergonomics seminar at Central Missouri State University in Warrensburg, Missouri.
- On September 13, 2005, NTSP's 2005 International Telecommunications Safety Conference was held
in St. Louis, Missouri. Brett Besser, Ergonomist, Salt Lake Technical Center, Directorate of
Science, Technology and Medicine, USDOL-OSHA presented "Ergonomics Alliance Update" and
"Ergonomics Technical Update." OSHA staff from Region VII, St. Louis, Missouri, Area Office
attended the conference.
- On September 21, 2004, NTSP held the 2004 International Telecommunications Safety Conference
in Golden, Colorado. Pamela Baptiste, Senior Industrial Hygienist, Region VIII, Denver, Colorado,
Area Office, USDOL-OSHA presented "OSHA Ergonomics Alliances and Enforcement." OSHA had a
tabletop display at the conference.
- Through the Alliance, OSHA provided input to NTSP during its development and updating of
Ergonomics Guidelines for Common Job Functions in the Telecommunications Industry,
which is posted on the NTSP Web site and linked to from the OSHA and NTSP Alliance Web page on the OSHA
Web site.
- NTSP representatives serve on the editorial board for the Ergonomics: Solutions for Electrical
Contractors eTool.
-- As of January 2008.
Back to Top
Precision Metalforming Association
The OSHA and Precision Metalforming Association (PMA) Alliance focuses on providing
PMA members and others with information, guidance and access to training resources to will help them
protect employees' health and safety in the metalforming industry. In particular, the Alliance focuses on
ergonomics hazards and lockout/tagout issues, including the prevention of amputations and other
injuries.
To meet the outreach and communication goals of the Alliance:
- On March 26, 2007, John Newquist, Assistant Regional Administrator, Cooperative and State
Programs, Region V, USDOL-OSHA presented "Enhancing Workplace Safety through OSHA's Cooperative
Programs" at the METALFORM Exposition and Conference in Rosemont, Illinois.
- Through the Alliance, Mary Bauer, Compliance Assistance Specialist (CAS), Region V, Eau Claire,
Wisconsin Area Office, USDOL-OSHA and Dana Root, Ergonomist, Region V, USDOL-OSHA developed a slide
presentation, "Ergonomics in the Pressroom," specifically for the metalforming industry; including
the handouts, "Hazard Zone Jobs Checklist," "Ergonomics Risk Factors Checklist," and "Sprains and
Strains Prevention Fact Sheet." The presentation has been given:
- On March 15, 2007, by Susan Porter, Industrial Hygienist, Region IV, Frankfort, Tennessee Area
Office, USDOL-OSHA at the PMA Power Press Safety Seminar in Minneapolis, Minnesota.
- On September 28, 2006, by Mary Bauer, CAS, Region V, Eau Claire, Minnesota Area Office, USDOL-OSHA
at the PMA Power Press Safety Seminar in Eagan, Minnesota.
- On November 9-11, 2006, PMA's 2006 Annual Meeting was held in Las Croabas, Puerto Rico. On
November 10, 2006, Paula White, Director, Directorate of Cooperative and State Programs, USDOL-OSHA,
participated in the roundtable, "Enhancing Workplace Safety through OSHA Voluntary Protection
Programs," which was given twice. On November 11, 2006, Paula White, gave the keynote address to the
General Assembly and provided an overview of OSHA's cooperative programs, including information
about the OSHA and PMA Alliance.
- Through the Alliance, PMA members published articles about the OSHA and PMA Alliance and the
Agency's compliance assistance products and activities in its bi-monthly publication, PMA Update;
its bi-weekly publication, MetalForming Xtra Newsletter; and its weekly electronic newsletter,
FLASHPoint.
- PMA representatives serve on the editorial board for the Machine Guarding eTool on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and health:
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA, spoke to OSHA and Alliance
Program participants and other safety and health professionals during the 2007 North American
Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of Labor in
Washington, D.C. NAOSH Week, sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, focuses on the
importance of preventing injuries and illnesses in the workplace. A number of Alliance Program
participants also supported the Week.
- On May 1, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA, spoke to OSHA and Alliance
Program participants and other safety and health professionals during the 2006 North American
Occupational Safety and Health (NAOSH) Week Kick-Off event at the U.S. Department of Labor in
Washington, D.C NAOSH Week, sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering focuses on the
importance of preventing injuries and illnesses in the workplace. A number of Alliance Program
participants also supported the Week.
--As of July 2007.
Back to Top
The
Roadway Work Zone Safety and Health Partners
OSHA signed The Roadway Work Zone Safety and Health Partners Alliance with
the following organizations:
- American Road and Transportation Builders Association (ARTBA)
- Associated General Contractors of America (AGC)
- International Union of Operating Engineers (IUOE)
- Laborers' International Union of North America (LIUNA)
- National Asphalt Pavement Association (NAPA)
- National Institute for Occupational Safety and Health (NIOSH)
Through the Alliance, the organizations work together to provide the Alliance Program participants
and other government and non-government entities with information, guidance and access to training
resources to help protect employees, including Spanish-speaking, and other high-risk or vulnerable
"hard-to-reach" workers, from general health and safety hazards and to reduce and prevent exposures
to roadway work zone safety and health hazards. The Alliance focuses on flagger safety, safer
deployment of traffic control devices, positive protection, night work, work-zone speeding and
runovers/backovers
To meet the outreach and communication goals of the Alliance:
- On April 28, 2008, members of the Alliance observed 2008 Workers Memorial Day (WMD) which is
sponsored by the American Federation of Labor and Congress of Industrial Organizations (AFL-CIO)
and other trade unions and recognizes workers who have been killed or injured on the job. The OSHA
and The Roadway Work Zone Safety and Health Partners Alliance Web page on the OSHA Web site links
to the WMD Web page on the AFL-CIO Web site.
- On April 7-11, 2008, members of the Alliance observed 2008 National Work Zone Awareness Week
(NWZAW)--Slow for the Cone Zone, which is sponsored by the Federal Highway Administration (FHWA),
the American Association of State Highway and Transportation Officials and the American Traffic
Safety Services Association and brings national attention to motorist and worker safety and
mobility issues in work zones. The OSHA and Roadway Work Zone Safety and Health Partners Web page
on the OSHA Web site links to the FHWA NWZAW Web page on the DOT Web site.
- On January 30, 2008, The Roadway Work Zone Safety and Health Partners representatives
participated in the second Alliance Program Construction Roundtable in Washington, D.C. During the
meeting, Alliance Program participants discussed products developed through the Roundtable and
identified potential projects and compliance assistance resources to help address safety and
health hazards in the construction industry. The Roadway Work Zone Safety and Health Partners
representatives are participating in the Roundtable's Fall Protection and Design for Safety
workgroups.
- On October 10-12, 2007, representatives from the OSHA Region IV Fort Lauderdale, Florida Area
Office staffed an Alliance Program exhibit booth at the InterTraffic North America Conference in
Fort Lauderdale, Florida.
- On October 10, 2007, members of the Alliance supported and promoted "Put the Brakes on
Fatalities Day," which was sponsored by the Department of Transportation's (DOT) National Highway
Traffic Safety Administration. The OSHA and The Roadway Work Zone Safety and Health Partners
Alliance Web page on the OSHA Web site links to the NHTSA Web page on the DOT Web site.
- On August 21, 2007, Don Elisburg, NAPA, gave an update on the activities of the OSHA and
Roadway Work Zone Safety and Health Partners Alliance at the NAPA Environment Safety and Plant
Operations Committee Meeting held during the NAPA Midyear Meeting in Amelia Island, Florida.
- On July 9-11, 2007, members of the Alliance participated in NIOSH Prevention through Design (PtD)
Conference, Construction Sector, in Washington, D.C.
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to the OSHA and
Alliance Program participants and other safety and health professionals during the 2007 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. The theme for the 2007
NAOSH Week was "All Modes of Transportation." The Roadway Work Zone Safety and Health Partners
Alliance, along with a number of other Alliance Program participants, supported the Week.
- On April 28, 2007, members of the Alliance observed 2007 Workers Memorial Day, which is
sponsored by the American Federation of Labor and Congress of Industrial Organizations (AFL-CIO)
and other trade unions and recognizes workers who have been killed or injured on the job. The OSHA
and The Roadway Work Zone Safety and Health Partners Alliance Web page on the OSHA Web site links
to the WMD Web page on the AFL-CIO Web site.
- On April 2-6, 2007, members of the Alliance observed 2007 National Work Zone Awareness Week
(NWZAW)--Signs of Change, which is sponsored by the Federal Highway Administration (FHWA), the
American Association of State Highway and Transportation Officials and the American Traffic Safety
Services Association and brings national attention to motorist and worker safety and mobility
issues in work zones. The OSHA and Roadway Work Zone Safety and Health Partners Web page on the
OSHA Web site links to the FHWA NWZAW Web page on the DOT Web site.
- Through the Alliance, the "Internal Traffic Control Plans" brochure developed by The Roadway
Work Zone Safety and Health Coalition was posted on the National Work Zone Information
Clearinghouse Web site and linked from the OSHA and The Roadway Work Zone Safety and Health
Partners Alliance Web page on the OSHA Web site.
- Through the Alliance Program Construction Roundtable's Fall Protection Workgroup, members of
The Roadway Work Zone Safety and Health Partners worked with other construction industry-related
Alliances to develop the following Toolbox Talks which were posted in October 2007 on The Roadway
Work Zone Safety and Health Partners Web site and linked to from the OSHA and The Roadway Work
Zone Safety and Health Partner Alliance Web page on the Agency Web site:
- Choosing the Right Ladder
- Inspect Ladders Carefully!
- Do's and Don'ts of Using a Ladder
- Set Up and Use of a Ladder
- Extension Ladder Safety
- Using a Stepladder Safely
- Alliance representatives serve on the editorial board for the Highway Work Zones and Signs,
Signals, and Barricades Safety and Health Topics Page on the OSHA Web site.
-- As of April 2008.
Back to Top
Safe Tank Alliance
Through the Alliance, API, the National
Fire Protection Association (NFPA) and the Steel Tank Institute/Steel Plate Fabricators Association
(STI/SPFA) work with OSHA to promote safe
tank entry, cleaning, maintenance, and rescue operations and work within and around petroleum and
petrochemical liquid storage tanks. The employees who work with tanks include, but are not limited
to, tank owners and operators, tank maintenance and repair workers, tank contractors and rescue
personnel.
To meet the outreach and communication goals of the Alliance:
- On November 16, 2006, Chuck Williams, Director, Region VI Houston, Texas South Area Office,
USDOL-OSHA presented "Hexavalent Chromium Permissible Exposure Limit – Regulation Overview" at the
Pressure Vessel Conference in Houston, Texas.
- On June 4-8, 2006, the NFPA World Safety Conference and Exposition was held in Orlando,
Florida. On June 6, 2006, Mat Chibbaro, Fire Protection Engineer, Directorate of Standards and
Guidance, USDOL-OSHA presented "Combustible Dust in Industry," and Lee Anne Jillings, Director,
Office of Outreach Services and Alliances, Directorate of Cooperative and State Programs,
USDOL-OSHA gave a presentation, "OSHA's Cooperative Programs and Compliance Assistance" which
included information on the OSHA and Safe Tank Alliance.
- On November 17-18, 2005, Joann Natarajan, Compliance Assistance Specialist, Region VI Austin,
Texas Area Office, USDOL-OSHA and Ron Tom, Manager Occupational Safety and Health Consultation
(OSHCON) Program, Texas Department of Insurance, Division of Workers' Compensation staffed the
Alliance Program exhibit at the API Contractor Management Conference in Austin, Texas.
- On October 25, 2005, Ernie Miller, Industrial Hygiene Consultant, Arizona Department of
Occupational Safety and Health gave a presentation on the On-site Consultation Program at the 2005
Storage Tank Management and Technology Conference and Safe Tank Entry Workshop in Phoenix,
Arizona.
- On June 20, 2005, Lee Anne Jillings, Director, Office of Outreach Services and Alliances,
Directorate of Cooperative and State Programs, USDOL-OSHA updated the API Executive Committee on
the OSHA Alliance Program at the Executive Committee Meeting in Washington, D.C.
- On May 2, 2005, Lee Anne Jillings, Director, Office of Outreach Services and Alliances,
Directorate of Cooperative and State Programs, USDOL-OSHA and Jess McCluer, Program Analyst,
Office of Outreach Services and Alliances, Directorate of Cooperative and State Programs,
USDOL-OSHA updated the API Safety & Fire Protection Subcommittee on the OSHA Alliance Program and
activities of the OSHA and Safe Tank Entry Alliance at the Subcommittee Meeting in Washington,
D.C.
- Through the Alliance, OSHA and Safe Tank representatives developed a "Safe Tank Entry Best
Practices" Seminar, which focuses on safe work practices, lessons learned and new technology being
used by the oil and gas industry during tank entry and cleaning operations. It was presented to
OSHA and Safe Tank Alliance, State Plan State participants and refinery professionals on:
- April 7-8, 2005, in Richmond, California.
- On November 1-4, 2004, the 2004 Storage Tank Management and Technology Conference and Safe Tank
Entry Workshop was held in Nashville, Tennessee. On November 3, 2004, Jess McCluer, Program
Analyst, Office of Outreach Services and Alliances, Directorate of Cooperative and State Programs,
USDOL-OSHA made a presentation on the Alliance Program and the activities of the OSHA and Safe
Tank Alliance. The Alliance Program had a tabletop display at the Conference.
- Through the Alliance, API developed a fact sheet, "Fall Prevention for Aboveground Storage
Tanks" that was posted on the API Web site and linked to from the OSHA and Safe Tank Alliance Web
page on the OSHA Web site.
- Safe Tank representatives helped develop and serve on the editorial boards for Oil and Gas Well
Drilling, Servicing and Storage and Confined Spaces Safety and Health Topics pages on the OSHA Web
site.
- Safe Tank representatives serve on the editorial board for Oil and Gas Well Drilling, Servicing
and Storage eTool on the OSHA Web site.
-- As of February 2007.
Back to Top
Sealant Waterproofing and Restoration Institute
The OSHA and Sealant Waterproofing and Restoration Institute (SWR Institute) Alliance
addresses improving working conditions for workers who work with sealants,
waterproofing, and restoration products by providing information and guidance to help employers
protect employees' health-particularly in the areas of reducing and preventing exposure to lead and
silica-and safety hazards-particularly in the areas of confined spaces, fall protection, and staging
requirements.
To meet the outreach and communication goals of the Alliance:
- On March 5-8, 2006, the SWR Institute 2006 Winter Technical Meeting was held in Bal Harbour, Florida. On
March 7, 2006, Luis Santiago, Director, Region IV, Ft. Lauderdale, Florida Area Office, USDOL-OSHA
presented "Developing a Site-Specific Safety Plan." Vergie Bain, Compliance Assistance Specialist,
Region IV, Ft. Lauderdale, Florida Area Office, USDOL-OSHA staffed an Alliance Program exhibit
booth.
- On October 23-25, 2005, the SWR Institute 2005 Fall Technical Meeting was held in San Francisco,
California. On October 25, 2006, Domenick Salvatore, Compliance Assistance Specialist, Region III,
Philadelphia, Pennsylvania Area Office, USDOL-OSHA presented "Don't Be Left Hanging: OSHA's Guide to
Self Rescue." Alvan Phillip, Exhibit Manager, Region IX, USDOL-OSHA staffed an Alliance Program
exhibit booth.
- On February 28 -March 3, 2005 the SWR Institute 2005 Annual Meeting was held in Puerto Rico. On March 2,
2005, Jose Carpena, Director, Region II, Puerto Rico Area Office, USDOL-OSHA presented "Emergency
Response." Representatives from the Region II Puerto Rico Area Office, USDOL-OSHA staffed an
Alliance Program tabletop exhibit.
- On September 19-21, 2004, the SWR Institute Fall Technical Meeting was held in Boston, Massachusetts. On
September 19, 2004, Dom Salvatore, Compliance Assistance Specialist, Region III, Philadelphia,
Pennsylvania Area Office, USDOL-OSHA presented "Respiratory Protection, Life Expectancy for Lungs."
The Alliance Program had a tabletop exhibit.
- On February 29-March 3, 2004, the SWR Institute 2004 Annual Meeting was held in Tucson, Arizona. On March
2, 2004, Dom Salvatore, Compliance Assistance Specialist, Region III, Philadelphia, Pennsylvania
Area Office, USDOL-OSHA presented an overview of the OSHA and SWR Institute Alliance and "The New Generation
of Work Platforms: Mast Scaffolding." The Alliance Program had a tabletop exhibit.
- On October 28, 2003, Dom Salvatore, Compliance Assistance Specialist, Region III, Philadelphia,
Pennsylvania Area Office, USDOL-OSHA presented an overview of the OSHA and SWR Institute Alliance emphasizing
the importance of confined space entry at the 2003 SWR Institute Fall Technical Meeting in Vancouver, British
Columbia.
- Through the Alliance, SWR Institute developed and distributed the SWR
Institute Safety and Health
Manual to SWR Institute members. The manual covers topics such as hazard communication, confined space,
fall protection, recordkeeping, personal protective equipment, respiratory protection and scaffolding.
- SWR Institute promoted the OSHA and SWR Institute Alliance and OSHA's compliance assistance resources through many
articles in its monthly publication, Member Briefs.
- SWR Institute representatives helped develop and serve on the editorial board of the Sealants,
Waterproofing and Restoration Industry Safety and Health Topics page on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and health:
- On July 8, 2004, SWR Institute participated in the Alliance Program's Construction Roundtable, in
Washington, DC. During the meeting, Alliance Program participants discussed working together on
cooperative projects for the construction industry. SWR Institute representatives are participating in the
Roundtable's Fall Protection and Design for Safety Workgroups.
-- As of February 2007.
Back to Top
Shipbuilders Council of America
OSHA and the Shipbuilders Council of America (SCA) along with the American
Shipbuilding Association (ASA) and the National Shipbuilding Research Program (NSRP) work together
to provide information and guidance to help protect shipyard employees' health and safety by
minimizing or eliminating exposure to shipyard safety and health hazards.
To meet the outreach and communication goals of the Alliance:
- On September 28, 2006, the SCA Safety Seminar was held in Sturgeon Bay, Wisconsin. Mel
Lischefski, Director, Region V, Appleton, Wisconsin, Area Office, USDOL-OSHA, updated 25 attendees
on the on the revised hexavalent chromium standards, and Amy Wangdahl, Office of Maritime
Standards, Directorate of Standards and Guidance, USDOL-OSHA updated the attendees on maritime
regulatory issues.
- SCA, ASA and NSRP worked with OSHA and members of the Agency's Strategic Partnerships in Region
III (South Tidewater Association of Ship Repairers), Region VI (SCA) and Region IX (Port of San
Diego Ship Repair Association) to develop the storyboard and script for the second
computer-animated hazard-awareness video based on actual shipyard fatalities. In April 2005, over
400 copies of the video were distributed to SCA, ASA and NSRP members and non-members and the
members of the Strategic Partnerships. On September 23, 2005, Steve Butler, Director, Office of
Maritime Enforcement USDOL-OSHA promoted the video during the Film & Multimedia presentations at
the XVIIth World Congress on Safety and Health at Work and 2005 National Safety Council Congress &
Expo, which was held September 17-23, 2005 in Orlando, Florida.
- On September 13, 2005, Joe Daddura, Safety Specialist, Office of Maritime Standards,
Directorate of Standards and Guidance, USDOL-OSHA presented "OSHA Standard on Fire Protection in
Shipyard Employment" at the SCA's Safety Seminar in North Kingstown, Rhode Island.
- On March 9, 2005, the SCA's Safety Seminar was held in Mobile, Alabama. Jim Maddux, Director,
Office of Maritime Standards, Directorate of Standards and Guidance, USDOL-OSHA presented "OSHA
Standard on Fire Protection in Shipyard Employment" and Jess McCluer, then Program Analyst, Office
of Outreach Services and Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA
presented "OSHA Maritime Alliances."
- On September 22, 2004, Jess McCluer, then Program Analyst, Office of Outreach Services and
Alliances, Directorate of Cooperative and State Programs, USDOL-OSHA, presented "OSHA Maritime
Alliances," at the SCA's Safety Seminar in Morgan City, Louisiana.
- On September 21, 2004, John Miles, then Region VI Administrator, Dallas, Texas, USDOL-OSHA
discussed the application process, requirements and benefits of VPP from both the industry and
government perspectives at a Voluntary Protection Programs (VPP) Seminar sponsored by the OSHA and
SCA, ASA and NSRP Alliances for members of maritime industry-related Alliances at Northrop Grumman
Ship Systems-Avondale Operations in Pascagoula, Louisiana.
- On September 13, 2004, Tom Pope, then Area Director, Region III, Norfolk, Virginia Area Office,
USDOL-OSHA; Captain Teresa Preston, Director, Safety, Environment & Quality, Atlantic Marine, Inc.
(SCA); and Jim Thornton, Director, Environment, Health & Safety, Northrop Grumman Newport News
(ASA/NSRP) presented a workshop, "Shipyard Alliances with OSHA," at the National Safety Council's,
another Alliance participant, Congress and Expo in New Orleans, Louisiana.
- On June 14-18, 2004, SCA members staffed an Alliance Program exhibit booth during the 2004 OSHA
Compliance Assistance Training Sessions in Falls Church, Virginia.
- On March 10, 2004, Clyde Payne, Area Director, Region IV, Jackson, Mississippi Area Office,
USDOL-OSHA presented "Maritime Industry Inspections and Area Alliance Update" at the SCA's Safety
Seminar in Pascagoula, Mississippi.
- Through the Alliance, members of SCA, ASA and NSRP worked with members of the American
Industrial Hygiene Association (AIHA), another Alliance Program participant, to develop "Safety
Alert: Deadly Hydrogen Sulfide and Shipyard Sewage" which was posted in July 2006 on the AIHA Web
site and linked to the OSHA and AIHA Alliance Web page on the OSHA Web site.
- Through the Alliance, SCA, ASA and NSRP helped develop the Fire Protection, Barge Cleaning,
Ship Building and Ship Breaking modules and serve on the editorial board for OSHA's Shipyard
Employment eTool, which is posted on the OSHA Web site.
- SCA, ASA and NSRP members serve on the editorial boards for the Maritime Industry and
Shipbuilding and Repair Safety and Health Topics pages on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and
health:
- On May 7, 2007, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to the OSHA and
Alliance Program participants and other safety and health professionals during the 2007 North
American Occupational Safety and Health (NAOSH) Week kick-off event at the U.S. Department of
Labor in Washington, D.C. Sponsored annually by the American Society of Safety Engineers (ASSE),
an Alliance Program participant, and the Canadian Society of Safety Engineering, the Week focuses
on the importance of preventing injuries and illnesses in the workplace. SCA, along with a number
of other Alliance Program participants, supported the Week.
- On May 1, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to OSHA and Alliance
Program participants and other safety and health professionals during the 2006 North American
Occupational Safety and Health (NAOSH) Week Kick-Off event at the U.S. Department of Labor in
Washington, D.C. NAOSH Week, sponsored annually by the American Society of Safety Engineers
(ASSE), an Alliance Program participant, and the Canadian Society of Safety Engineering focuses on
the importance of preventing injuries and illnesses in the workplace. SCA, along with a number of
other Alliance Program participants, supported the Week.
- On September 8, 2005, SCA representatives participated in the Alliance Program's Small Business
Roundtable in Washington, D.C. During the meeting, Alliance Program participants provided a number
of recommendations to OSHA on how to enhance its small business compliance assistance activities
and resources.
-- As of August 2007.
Back to Top
SkillsUSA
Through this Alliance, OSHA and SkillsUSA provide career and technical educators and their students
with materials, guidance and access to training resources that affect the occupational safety and
health of young workers.
To meet the outreach and communication goals of the Alliance:
- On October 20, 2006, five student representatives from Maryland's Calvert Career Center and four
students from Virginia's Edison Career Center served on a focus group convened by the U.S.
Department of Labor in Washington, D.C. with the Federal Network for Young Worker Safety and Health
(FedNet). Principals from both schools and two SkillsUSA advisors also attended the meeting.
- On June 18-24, 2006, the SkillsUSA National Leadership and Skills Conference and TECHSPO were held
in Kansas City, Missouri. Charles Adkins, Regional Administrator, Region VII, USDOL-OSHA provided an
OSHA update at the opening breakfast; Dr. Robert Nester, Health Scientist, Office of Science,
Technology and Medicine, USDOL-OSHA judged the students competing in the health care field; OSHA
Training Institute (OTI) representatives provided the 30-hour OSHA 500 Trainer-the-Trainer
Occupational Safety and Health Standards for the Construction Industry course for teachers, and
Veneta Chatmon, Office of Communication, USDOL-OSHA staffed the OSHA and SkillsUSA exhibit booth.
- On April 28, 2006, Dean Wingo, Area Director, Region VI USDOL-OSHA; Frank Strasheim, Acting
Regional Administrator, Region VI USDOL-OSHA ; Dr. Larry Teverbaugh, CareerSafe Online; Janet
Conner, SkillsUSA Texas Director; and Andrea Foster, CareerSafe Online signed an Alliance with
CareerSafe, SkillsUSA Texas and OSHA Region VI at the 2006 SkillsUSA Texas State Leadership and
Skills Conference in Fort Worth, Texas.
- On April 6, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA and Tim Lawrence, Executive
Director, SkillsUSA spoke at OSHA's Teen Summer Job Safety Campaign Kick-Off event in Alexandria,
Virginia.
- On February 6-9, 2006, SkillsUSA and Virginia OSHA representatives provided the 30-hour OSHA 501
Train-the-Trainer Occupational Safety and Health Standards for General Industry course for Northern
Virginia Career and Technical Education instructors in Leesburg, Virginia.
To meet the goals of promoting the national dialogue on workplace safety and health:
- On May 1, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA spoke to OSHA and Alliance
Program participants and other safety and health professionals during the 2006 North American
Occupational Safety and Health (NAOSH) Week Kick-Off event at the U.S. Department of Labor in
Washington, D.C. Tom Holdsworth, Director, Office of Communications and Government Relations,
SkillsUSA and SkillsUSA students from the Calvert Career Center represented SkillsUSA at the event.
NAOSH Week, sponsored annually by the American Society of Safety Engineers (ASSE), an Alliance
Program participant, and the Canadian Society of Safety Engineering, focuses on the importance of
preventing injuries and illnesses in the workplace. SkillsUSA along with a number of other Alliance
Program participants supported the Week.
-- As of February 2007.
Back to Top
Society for Chemical Hazard Communication
The OSHA and Society for Chemical Hazard Communication (SCHC) Alliance focuses
on working with small businesses and providing information and education to address issues
associated with hazard communication and material safety data sheets (MSDSs) in the workplace. The
Alliance also works to distribute information and increase awareness about the Globally Harmonized
System (GHS) of Classification and Labeling of Chemicals.
To meet the outreach and communication goals of the Alliance:
- On September 12-13, 2006, the SCHC 2006 Fall Meeting was held in Arlington, Virginia. On
September 12, 2006, Jennifer Silk, then Deputy Director, Directorate of Standards and Guidance,
USDOL-OSHA served as a speaker on a panel, "GHS UPDATE United States." The Alliance Program had an
exhibit booth.
- On March 27, 2006, Ann Brockhaus, President, SCHC, gave a presentation on the OSHA and SCHC
Alliance at the SCHC 2006 Spring Meeting in Orlando, Florida.
- On January 10, 2006 Ann Brockhaus, Vice President, SCHC, presented "The GHS - What You Need to
Know Now" at the National Capital Chapter ASSE and the Chesapeake Area Biological Safety
Association Meeting in Laurel, Maryland.
- On December 13, 2005, Jennifer Silk, then Deputy Director, Directorate of Standards and
Guidance, USDOL-OSHA; Michelle Sullivan, Chair, Board of Directors, SCHC; and Jon Hellerstein,
Certified Industrial Hygienist, American Industrial Hygiene Association (AIHA) member and Alliance
Program participant, MeadWestvaco Corporation, participated in a teleWeb virtual seminar jointly
sponsored by SCHC and AIHA on "The Globally Harmonized System (GHS) for Worldwide Hazard
Communication: Status and Update on U.S. Implementation."
- On September 27-28, 2005, the SCHC 2005 Fall Meeting was held in Arlington, Virginia. On
September 27, 2005, Jennifer Silk, then Deputy Director, Directorate of Standards and Guidance,
USDOL-OSHA presented "U.S. Move Toward GHS Implementation," and on September 28, 2005, Jackie
Annis, Industrial Hygienist, Directorate of Enforcement, USDOL-OSHA presented "Hazard
Communication Enforcement: OSHA's Perspective." The Alliance Program had an exhibit booth.
- May 19, 2005, David O'Connor, Summer Hire, Directorate of Standards and Guidance, USDOL-OSHA,
and Michele Sullivan, Chair, Board of Directors, SCHC presented "GHS – Update on U.S.
Implementation" and Maureen O'Donnell, Industrial Hygienist Team Leader, Directorate of
Enforcement Programs, USDOL-OSHA; Jackie Annis, Industrial Hygienist, Directorate of Enforcement
Programs, USDOL-OSHA; David O'Connor, Summer Hire, Directorate of Standards and Guidance,
USDOL-OSHA presented "OSHA Hazard Communication Initiative" at the ISSA Legislative and Regulatory
Forum in Arlington, Virginia. ISSA is also an Alliance Program participant.
- On April 12, 2005, Ann Brockhaus, Vice President, SCHC, presented "Alliance Update" at the SCHC
2005 Spring Meeting in Phoenix, Arizona.
- On March 30, 2005, Michele Sullivan, Chair, Board of Directors, SCHC, presented "Global
Harmonization of MSDS and Hazard Communication" at the Ohio Safety Congress & Expo in Columbus,
Ohio.
- On March 2, 2005, Michele Sullivan, Chair, Board of Directors, SCHC, presented "Globally
Harmonized System of Classification and Labeling: Overview" to the American Society of Safety
Engineers – National Capital Chapter and American Industrial Hygiene Association – Potomac
Section, in Washington, D.C.
- On November 16, 2004, Michele Sullivan, Chair, Board of Directors, SCHC, presented "GHS Panels"
to The Chemical Producers and Distributors Association and Consumer Specialty Products Association
Implications of the Globally Harmonized System for Pesticide Products in Alexandria, Virginia.
- On November 15, 2004, Michele Sullivan, Chair, Board of Directors, SCHC, presented "GHS, ANSI
Z400 MSDS Standard" at ISSA's HazCom 101 in New Orleans, Louisiana. ISSA is also an Alliance
Program participant.
- On October 22-26, 2004, the SCHC Fall 2004 Meeting was held in Arlington, Virginia. On October
22, 2004, Michelle Sullivan, Chair, Board of Directors, SCHC, presented "OSHA-SCHC Alliance." On
October 26, 2004, Jennifer Silk, then Deputy Director, Directorate of Standards and Guidance,
USDOL-OSHA; Maureen O'Donnell, Industrial Hygienist Team Leader, Directorate of Enforcement
Programs, USDOL-OSHA; and David O'Connor, Summer Hire, Directorate of Standards and Guidance,
USDOL-OSHA presented "OSHA's New Hazard Communication Initiative." Ms. Silk also presented
"Emerging Issues: Control Banding – What Hazard Communication Professionals Need to Know" and "GHS
- US Update on Implementation." OSHA representatives staffed an Alliance Program exhibit booth.
- On September 14, 2004, Jennifer Silk, then Deputy Director, Directorate of Standards and
Guidance, USDOL-OSHA and Michelle Sullivan, Chair, SCHC led a workshop panel, "Globally Harmonized
System (GHS) for Chemicals" at the 2004 National Safety Council (NSC) Congress and Expo in New
Orleans, Louisiana. NSC is also an Alliance Program participant.
- On May 11-12, 2004, the AIHA, an Alliance Program participant, held the AIHce 2004 in Atlanta,
Georgia. On May 11, 2004, Jennifer Silk, then Deputy Director, Directorate of Standards and
Guidance, USDOL-OSHA presented "The Globally Harmonized System (GHS) of Classification and
Labeling of Chemicals." On May 12, 2004, Jennifer Silk and Michele Sullivan, Chair, SCHC presented
"Creation and Evolution of Material Safety Data Sheets: Cradle-to-Cradle -- Birth of the New GHS
SDS Era!"
- On April 28, 2004, Denese Deeds, President, SCHC, presented "GHS: Hazcom for the 21st Century"
at the Connecticut Business and Industry Association (CBIA) Health and Safety Conference in
Southington, Connecticut.
- On March 25, 2004, John Henshaw, former-Assistant Secretary of Labor USDOL-OSHA and Michele
Sullivan, Chair, SCHC testified about the OSHA Hazard Communication Standard and the value of
material safety data sheets at the Senate Subcommittee on Employment, Safety and Training Hearing,
"Hazard Communication in the Workplace," in Washington, D.C.
- On March 23, 2004, John Miles, then Regional Administrator, Region VI USDOL-OSHA, presented
"OSHA's Hispanic Initiatives/Multilingual HazCom Issues" and Robert Skoglund, President, SCHC,
gave an update on the OSHA and SCHC Alliance at the SCHC Spring Meeting in New Orleans, Louisiana.
- On November 1, 2003, Rober Skoglund, President, SCHC, presented "Implementing the GHS:
Opportunities and Challenges" at the 2003 Intergovernmental Forum on Chemical Safety IV, in
Bangkok, Thailand.
- SCHC representatives serve on the editorial board for the Hazard Communication Safety and
Health Topics page on the OSHA Web site.
To meet the goals of promoting the national dialogue on workplace safety and health:
- On February 15, 2005, SCHC participated in the Alliance Program's Hazard Communication
Roundtable in Washington, DC. During the meeting, Alliance Program participants discussed hazard
communication compliance assistance projects and activities they could work on together. SCHC
representatives also participate in the Roundtable's Promoting the Globally Harmonized System for
Classification and Labeling of Chemicals Workgroup.
-- As of February 2007.
Back to Top
Society of the Plastics Industry, Inc.
The OSHA and the Society of the Plastics Industry (SPI) Alliance focuses on
providing SPI's members and others with information, guidance and access to training resources to
promote machine safety particularly in identifying machinery hazards and providing potential
solutions to reduce injuries (e.g., lacerations, burns, amputations). In addition, the organizations
work together to raise awareness of hazard communication issues in the workplace.
To meet the training and education goals of the Alliance:
- On July 16, 2004, Jim Washam, then Machine Guarding Coordinator, Region V, Cincinnati, Ohio
Area Office, USDOL-OSHA and Wayne Wilson, Southern Industries, Inc. presented the Machine Safety
for the Plastic Roll-Fed and Inline Thermoforming Train-the-Trainer course at Placon Corporation
in Madison, Wisconsin.
- On April 28, 2004, Jim Washam, then Machine Guarding Coordinator, Region V, Cincinnati, Ohio
Area Office, USDOL-OSHA and Wayne Wilson, United Southern Industries, Inc. presented the Machine
Safety for Extrusion Train-the-Trainer course at the SPI Sheet Producers Division's Spring
Technical Conference in Chesterfield, Missouri.
- On November 18, 2003, Jim Washam, then Machine Guarding Coordinator, Region V, Cincinnati, Ohio
Area Office, USDOL-OSHA and Wayne Wilson, United Southern Industries, Inc. presented the Machine
Safety for Injection Molding Machines Train-the-Trainer course at OSHA's Education Center at
Sinclair Community College in Dayton, Ohio.
- On August 6, 2003, Jim Washam, then Machine Guarding Coordinator, Region V, Cincinnati, Ohio
Area Office, USDOL-OSHA and Wayne Wilson, United Southern Industries, Inc. presented the Machine
Safety for Injection Molding Machines Train-the-Trainer course at Isothermal Community College in
Forest City, North Carolina.
- On June 26, 2003, members of the Alliance conducted a workshop, "Machine Safety for Injection
Molding Machines," at NPE 2003: The International Plastics Showcase in Chicago, Illinois.
- Through the Alliance Program, OSHA and SPI developed slide presentations, "Injection Molding
Machine Safety Training Course," "Rollstock and Sheet Extrusion Machine Safety Training Course,"
and "Roll-Fed and Inline Thermoforming Machine Safety Training Course."
To meet the outreach and communication goals of the Alliance:
- On June 22, 2006, NPE 2006: International Plastics Showcase was held in Chicago, Illinois.
Cathleen Cronin, Chief, Division of Training and Educational Development, Office of Training and
Education, USDOL-OSHA presented "OSHA and SPI Alliance and OSHA's Susan Harwood Training Grant
Program" as part of a panel on workforce development grants and training resources. In addition,
Jim Washam, then Machine Guarding Coordinator, Region V, USDOL-OSHA and Wayne Wilson, United
Southern Industries, Inc. taught workshops on rollstock and sheet extrusion machinery safety and
roll-fed and inline thermoforming machinery safety and on injection molding machinery safety and
blow molding machinery safety. Bill Coullehan, Compliance Assistance Specialist, Calumet City,
Illinois Area Office, USDOL-OSHA staffed an OSHA and SPI Alliance Program exhibit booth.
- On September 28-30, 2004, SPI and OSHA representatives staffed an Alliance Program exhibit
booth at Plastics USA 2004 in Chicago, Illinois.
- On June 15, 2004, OSHA held Compliance Assistance Training Sessions in Falls Church, Virginia.
Susan Howe, Senior Technical Director, Worker and Product Safety, SPI presented "Writing a
Successful Alliance Agreement" and shared OSHA and SPI Alliance success stories and best
practices. SPI had an exhibit booth.
- On April 27, 2004, the SPI Sheet Producers Division's Spring Technical Conference was held in
Chesterfield, Missouri. Susan Howe, Senior Technical Director, Worker and Product Safety, SPI,
presented "The OSHA and SPI Alliance." Representatives from the OSHA and SPI Alliance attended the
conference.
- On June 24-25, 2003, NPE 2003: The International Plastics Showcase was held in Chicago,
Illinois. SPI and OSHA Alliance representatives conducted a workshop, "How to Develop an
Ergonomics Process." At "Face to Face with OSHA," an informal workshop, John Hermanson, then OSHA
Region V Area Director, Chicago North, Illinois, Area Office, USDOL-OSHA addressed questions
concerning OSHA program areas, such as lock-out/tag-out, ergonomics and cooperative programs. OSHA
and SPI representatives staffed an Alliance Program exhibit booth.
- SPI representatives helped develop the Horizontal Injection Molding Machines and the
Thermoforming Machines modules for the Machine Guarding eTool on the OSHA Web site and serve on
the eTool's editorial board.
- SPI representatives helped develop and serve on the editorial board for the Assistance for the
Plastics Industry Safety and Health Topics page on the OSHA Web site.
-- As of January 2008.
Back to Top
Tree Care Industry Association, Inc.
The OSHA and Tree Care Industry Association, Inc. (TCIA) Alliance focuses on providing TCIA's
members and others in the tree care industry, including small businesses, with information,
guidance, and access to training resources that help them protect employees' health and safety. In
particular, the Alliance addresses reducing and preventing exposure to safety and health issues
related to tree removal and electrical, falls, and struck-by hazards.
To meet the outreach and communication goals of the Alliance:
- On November 8-10, 2007, Thomas G. Hozebin, Occupational Safety and Health Manager, Connecticut
Department of Labor, Division of Occupational Safety and Health (CONN-OSHA); and John Able,
Occupational Safety Training Specialist, Connecticut Department of Labor, CONN-OSHA staffed an
Alliance Program exhibit booth at the TCI EXPO 2007 Trade Show and Conference in Hartford,
Connecticut.
- On September 20, 2007, Rob Swick, Program Analyst, Office of Outreach Services and Alliances,
Directorate of Cooperative and State Programs, USDOL-OSHA presented an Alliance Update during the
TCIA Certified Tree Care Program in Linthicum Heights, Maryland.
- Through the Alliance, Peter Gerstenberger, Vice President, TCIA, presented Update" at the
following TCIA Certified Tree Care Safety Professional Workshops:
- On August 22, 2007, in San Jose, California.
- On March 21, 2007, in New Brunswick, New Jersey.
- On March 15, 2007, in Chicago, Illinois.
- On February 22, 2007, in Charlotte, North Carolina.
- On December 13, 2006, in Cleveland, Ohio.
- On November 29, 2006, in Hartford, Connecticut.
- Through the Alliance, Peter Gerstenberger, Vice President, TCIA, presented "Hazards Faced in
the Arboriculture Industry" at the following OSHA Region I Safety Summits:
- On March 30, 2007 in Newport, Rhode Island.
- On March 28, 2007 in Portland, Maine.
- On November 10, 2006, former-Assistant Secretary Edwin G. Foulke, Jr. , USDOL-OSHA presented "OSHA's
Alliance Program" at the TCI EXPO 2006 Trade Show and Conference in Baltimore, Maryland. Following
his speech, Mr. Foulke signed the OSHA and TCIA Alliance agreement.
- TCIA representatives helped develop and serve on the editorial board of the Tree Care Industry
Safety and Health Topics page on the OSHA Web site.
-- As of April 2008.
Back to Top
Washington Division of URS Corporation (Formerly Washington Group International)
The OSHA and Washington Division of URS Corporation (formerly Washington Group
International) Alliance encourages the
organizations to share information, guidance, best practices, access to training resources and
technical knowledge to help protect employees' safety and health. In particular, the Alliance is
addressing the areas of cranes and rigging, hearing protection and ergonomics within the engineering
and construction industry.
To meet the training and education goals of the Alliance:
- On June 5-6, 2007, Rick Callor, Corporate Trainer, Washington Division of URS Corporation
(formerly Washington Group International) taught the
OSHA 10-Hour Construction Outreach Training Program to U.S. Army representatives at the Rocky
Mountain Arsenal in Denver, Colorado.
- On February 5-6, 2007, Rick Callor, Corporate Trainer, Washington Group International taught
the OSHA 10-Hour Construction Outreach Training Program at the Western Energy Training Center at
the College of Eastern Utah in Price, Utah.
- October 2006–January 2007. Van Howell, Region X, Boise, Idaho Area Office, USDOL-OSHA, Willie
Piispanen, Washington Group International and Dr. Dale Stephenson, Boise State University,
presented an ASP/CSP Safety Fundamentals class at OSHA's Boise, Idaho Area Office.
- On June 27-30, 2005, the OSHA 30-Hour Construction Outreach Training Program was held in Idaho
Falls, Idaho. Washington Group International representatives assisted Region X Boise, Idaho Area
Office, USDOL-OSHA in arranging the OSHA Construction Outreach Train-the Trainer Program for Idaho
educators. In addition, OSHA's Training Institute provided an instructor for the course.
- On March 7-8, 2005, the OSHA 10-Hour Outreach Training Programs for General Industry and the
Construction Industry were held in Idaho Falls, Idaho. Washington Group International
representatives worked with the Idaho State Department of Education, Division of
Professional-Technical Education to organize, teach, and host the training programs for trade
school educators in Idaho.
- On February 22-23, 2005, the OSHA 10-Hour Outreach Training Programs for General Industry and
the Construction Industry were held in Coeur D'Alene, Idaho. Washington Group International
representatives worked with the Idaho State Department of Education, Division of
Professional-Technical Education to organize, teach, and host the training programs for trade
school educators in Idaho.
- Washington Group International has provided its 16-hour Safety Qualified Supervisor Training
class, which includes OSHA's 10-hour Construction Outreach Training Program, to Washington Group
and OSHA staff on several occasions. A total of 83 attendees participated in the following
training sessions:
- December 2-3, 2003 in Denver, Colorado,
- April 28 - 29, 2004 in Birmingham, Alabama,
- June 2-3, 2004 in Seattle, Washington,
- December 10-11, 2004 in Arlington Virginia.
To meet the outreach and communication goals of the Alliance:
- On October 4-6, 2006, the 2006 Intermountain Northwest Safety Conference was held in Boise,
Idaho. During the event, Van Howell, Region X, Boise, Idaho Area Office, USDOL-OSHA was the
Technical Session chair. The Washington Group International was the sponsor for the conference's
OSHA technical track and also had an information booth during the event. More than 175 safety and
health professionals participated in the 3-day conference.
- On July 24-27, 2006, the Washington Group International's Safety Workshop was held in Boise,
Idaho. On July 24, 2006, Paula White, Director, Directorate of Cooperative and State Programs,
USDOL-OSHA presented "OSHA Cooperative Program Update" and discussed the Agency's Voluntary
Protection Programs and its Challenge Pilot, Strategic Partnerships and the Alliance Program. On
July 25, 2006, Stewart Burkhammer, Director, Office of Construction Services, USDOL-OSHA presented
"OSHA Construction Update" and highlighted the Alliances that are impacting the construction
industry.
- On June 11-14, 2006, the ASSE's Professional Development Conference, Safety 2006, was held in
Seattle, Washington. On June 14, 2006, Stewart Burkhammer, Director, Office of Construction
Services, Directorate of Construction, USDOL-OSHA and Brad Giles, Vice President for Environmental
Safety, Health and Security, Washington Group International participated in a panel presentation,
"Designing for Construction Worker Safety." On June 12, 2006, Stewart Burkhammer, Director, Office
of Construction Services, Directorate of Construction, USDOL-OSHA and Brad Giles, Vice President
for Environmental Safety, Health and Security, Washington Group International participated in a
panel roundtable, "OSHA Construction Update."
- On June 12-15, 2005, the ASSE's Professional Development Conference, Safety 2005, was held in
New Orleans, Louisiana. On June 15, 2005, Stewart Burkhammer, Director, Office of Construction
Services, Director of Construction, USDOL-OSHA; Brad Giles, Vice President for Environmental
Safety, Health and Security, Washington Group International; and a representative from the OSHA
and Board of Certified Safety Professionals and Council on Certification of Health, Environmental
and Safety Technologists Alliance made presentations during a conference workshop, "Supporting SH&E
Careers in Government."
- On June 14-18, 2004, the 2004 OSHA Compliance Assistance Training Sessions were held in Falls
Church, Virginia. On June 16, 2004, Willie Piispanen, Corporate Industrial Hygienist, Washington
Group International gave a presentation during the workshop, "Industrial Hygiene Intervention for
Lead, Arsenic and Crystalline Silica in Construction," and discussed methods for dealing with
lead, arsenic and crystalline silica in construction and remediation projects.
- On March 9, 2004, Region I's Construction Roundtable was held in Boston, Massachusetts. The
Washington Group presented "Economics of Safety."
- On February 9-10, 2004, the Washington Group International's Safety Workshop was held in Boise,
Idaho. Workshop speakers included Richard Terrill, Region X Administrator, USDOL-OSHA; Dave
Lauriski, then Assistant Secretary of Labor for the Mine Safety and Health Administration, USDOL;
and Dave Stanton, Safety Manager for Middle East Operations, U.S. Army Corps of Engineers
- On June 9-13, 2003, the 2nd Annual OSHA Compliance Assistance Conference was held in Vienna,
Virginia. On June 11, 2003, Brad Giles, Vice President for Environmental Safety and Health,
Washington Group International was a speaker during a workshop, "Alliances Add Value," and
discussed the reasons for forming an Alliance, lessons learned, maintaining momentum, and managing
resources. The Washington Group International also exhibited during conference.
- Washington Group International representatives serve on the editorial boards for the Accident
Investigations; Construction – Crane; Derrick and Hoist Safety; Construction – Scaffolding; Crane,
Derrick, and Hoist Safety; Fall Protection; Heavy Metals; Safety and Health Programs; Scaffolding;
Silica, Crystalline; Trenching and Excavation; and Workplace Violence Safety and Health Topics
pages on OSHA's Web site.
To meet the goals of promoting the national dialogue on workplace safety and health:
- On December 11-15, 2006, the Safety Fest of the Great Northwest was held in Boise, Idaho. On
December 11, 2006, former-Assistant Secretary Edwin G. Foulke, Jr., USDOL-OSHA presented the Safety
Fest's opening address. On December 12, 2006, Richard Terrill, Regional Administrator, Region X,
Seattle, Washington participated in the event. In addition, approximately 92 private companies and
18 government and non-profit groups sent employees to the event who attended numerous
construction-related training classes free-of-charge. Twenty-four construction-related companies
exhibited their products and services in a vendor area.
- On November 29-December 2, 2005, the Safety Fest of the Great Northwest was held in Boise,
Idaho. On November 12, 2005. The Honorable Governor Dirk Kempthorne, Richard Terrell, Regional
Administrator, Region X, Seattle, Washington, USDOL-OSHA; Bill Bankhead, Compliance Assistance
Specialist, Region X, Boise, Idaho Area Office, USDOL-OSHA; and Brad Giles, Vice President of
Environmental, Safety, Health and Security, Washington Group International participated in the
event. During the Safety Fest, 24 training classes were presented free-of-charge and 167 attendees
completed the OSHA 10-Hour Construction Outreach Training Program, including 36 participants in
two Spanish language presentations.
- Washington Group International participated in the Alliance Program's Construction Roundtable
on July 8, 2004 in Washington, D.C. During the meeting, Alliance Program participants discussed
working together on cooperative projects for the construction industry. Washington Group
representatives are participating in the Roundtable's Fall Protection and Design for Safety
workgroups. Through the Design for Safety Workgroup, the Washington Group helped produce a case
study, "Washington Group International Designs and Builds a Mixed-Waste Treatment Facility," that
was posted on OSHA's Web site.
-- As of October 2007.
|