The following are granted special permits relating to the 49 Code of Federal Regulations (CFR) Part 192. They are displayed in regulation sub-part order.
[NOTE: The attached documents are in PDF format, you can download a free viewer. If you have problems accessing the PDFs or the information, report your problem for further assistance.]
Part 192 Transportation of Natural and Other Gas by Pipeline: Minimum Federal Safety Standards: Subpart A - General
192.1; Scope of Part
192.3 Definitions; "Adminisrator"
Subpart C: Pipe Design
192.111 Design Factor (F) for Steel Pipe
192.121; Design of Plastic Pipe
192.123; Design Limitations for Plastic Pipe
Subpart D: Design of Pipeline Components
192.150; Passage of Internal Inspection Devices
192.179; Transmission Line Valves
192.195; Protection against Accidental Overpressuring
192.201; Required Capacity of Pressure Relieving and Limiting Stations
192.203; Instrument, Control, and Sampling Pipe and Components
Subpart E: Welding of Steel in Pipelines
192.227; Qualification of Welders
192.243; Nondestructive Testing
Subpart G: General Construction Requirements for Transmission Lines and Mains
192.309; Repair of Steel Pipe
192.321; Installation of Plastic Pipe
- February 1, 1999
- February 1, 1999
- November 19, 1998
- November 10, 1998
- November 2, 1998
- November 2, 1998
- November 2, 1998
- December 2, 1997
- December 1, 1997
- December 1, 1997
- February 1996
- November 1995
- March 1990
192.327; Cover
Subpart H: Customer Meters, Service Regulators, and Service Lines
192.375; Service Lines: Plastic
Subpart I: Requirements for Corrosion Control
192.453; General; Procedures Required
192.455; Buried or Submerged Pipelines Installed after 7/31/71
192.457; Buried or Submerged Pipelines Installed before 8/1/71
192.461; External Corrosion Control: Protective Coating
192.463; External Corrosion Control: Cathodic Protection
192.465; External Corrosion Control: Monitoring
192.467; External Corrosion Control: Electrical Isolation
192.469; External Corrosion Control: Test Stations
192.471; External Corrosion Control: Test Leads
192.479; Atmospheric Corrosion Control: General
192.483; Remedial Measures: General
192.485; Remedial Measures: Transmission Lines
192.487; Remedial Measures: Distribution Lines other than Cast Iron or Ductile
192.491; Corrosion Control Records
Subpart J: Test Requirements
192.503; General Requirements
192.505; Strength Test Requirements for Steel Pipeline
Subpart K: Uprating
192.557; Steel Pipelines to a Pressure that will produce a Hoop Stress less than 30% of SMYS
Subpart L: Operations
192.605; Procedural Manual for Operations, Maintenance, and Emergencies
192.611; Change in class location: Confirmation or revision of Maximum allowable operating Pressure
192.612; Underwater Inspection and Reburial of Pipeline in the Gulf of Mexico and its Inlets
192.619; Maximum Allowable Operating Pressure: Steel or Plastic Pipelines
192.621; Maximum Allowable Operating Pressure: High Pressure Distribution Systems
192.625; Odorization of Gas
Subpart M: Maintenance
192.703; General
192.707; Line Markers for Mains and Transmission Lines
192.713; Transmission Lines: Permanent Field Repair of Imperfections and Damages
192.723; Distribution Systems: Leakage Surveys
192.739; Pressure Limiting and Regulating Stations: Inspection and Testing
192.741; Pressure Limiting and Regulating Stations: Telemetering or Recording
192.743; Pressure Limiting and Regulating Stations: Testing of Relief Devices
![[Header] PHMSA - U.S. Department of Transportation - Pipeline and Hazardous materials Safety Adminis](https://webarchive.library.unt.edu/eot2008/20090509044255im_/http://www.phmsa.dot.gov/staticfiles/PHMSA/SiteHeaders/Images/PHMSASiteHeader.gif)
