|
|
Student Presentations - Jigsaws
**Disclaimer: Provision of these presentations by NIOSH does
not constitute endorsement of the views expressed or recommendation
for the use of any commercial product, commodity or service
mentioned. The opinions and conclusions expressed are those
of the authors and not necessarily those of NIOSH.
1) Influence of Panel Mounting on Jigsaw Noise: A
Cutting Edge Solution (2003) - Adam Pender, Jacob
Macke, Scott Long, and Brad Beach
Flash Version
External Link: http://ia310840.us.archive.org/2/items/NOISENOISE3/CuttingEdgeP.swf
2) Acoustics Project-Power Tools Analysis (2003)
- Kalyan Chakravarthy, Katherine Ford, Caroline Kent, Brian
Pfieffer, Andy Sanders, and Karl Thal
Flash Version
External Link: http://ia310840.us.archive.org/2/items/NOISENOISE3/ImpJigC_1.swf
3) Study and Control of Noise from Power Tools (2003)
- Jun Cai, Suresh-Babu Chennagowni, Douglas Coombs, R. Matthew
Giachetto, and Prashant Kulkarni
Flash Version
External Link: http://ia310840.us.archive.org/2/items/NOISENOISE3/IMPJIGC_3CORRECTED.SWF
4) Attenuation of Jigsaw Vibrations and Noise (2003)
- Mark Deneau, Erin Horan, Brian McKay, and Mark Michalski
Flash Version
External Link: http://ia310840.us.archive.org/2/items/NOISENOISE3/JigSawP.swf
5) Study and Control of Noise from Power Tools (2003)
- Todd Buchholz, Douglas Coombs, Matthew Giachetto, Prashant
Kulkarni, and Daniel Wade
Flash Version
External Link: http://ia310840.us.archive.org/2/items/NOISENOISE3/GROUP11_ACSII.SWF
|