|
CFSAN/Office of Food Additive Safety
December 2008
Environmental Guidance | Food Contact Substance Program
The following inventory lists notifications allowed to become effective, which are agency actions of a type requiring environmental consideration. Each listing of an effective notification comprises the Food Contact Notification (FCN) number, the corresponding food contact substance (FCS) using an abbreviated identity, and the environmental requirement and decision. Additional details about the listed FCNs, giving the intended uses, the notifiers and manufacturers, and any specifications or limitations are available on the Inventory of Effective Food Contact Substance Notifications page.
To meet FDA's environmental requirements under the National Environmental Policy Act (NEPA), an FCN must contain an environmental assessment (EA), unless the proposed action is one of a specific class that qualifies for exclusion under 21 CFR 25.32. For specific guidance on the data and information recommended for inclusion in a food contact substance notification, potential notifiers should consult the Food Contact Substance Program page. For additional questions regarding environmental submissions for FCNs, please consult our Environmental Guidance page or contact the Environmental Review Team at .
If the Agency determines that information in an EA supports a decision that no significant environmental impacts are expected, then the Agency prepares a FONSI (Finding of No Significant Impact). If evaluation of data or information in an EA or in other sources available to the Agency leads to a finding that a proposed action may significantly affect the quality of the human environment, then the Agency prepares an EIS (Environmental Impact Statement). Also, the Agency prepares supplements to EAs and to claims of categorical exclusions that were submitted by industry if more evidence is needed to support a decision.
Full definitions of labels used in the inventory follow:
| Label | Definition |
|---|---|
| Cat Ex | Categorical Exclusion. Classes of actions listed in 21 CFR 25.32 that do not require the preparation of an EA or an EIS. |
| Cat Ex Memo | Categorical Exclusion Memo. These memoranda simply state only that the a claim contains the section under which categorical exclusion is claimed, states compliance with the categorical exclusion criteria, and states that no extraordinary circumstances exist that require the submission of an environmental assessment. Therefore, these memoranda are not included in the inventory unless the Cat Ex memo contains additional information. |
| Cat Ex Supplement | Supplement prepared by FDA for the Categorical Exclusion Memo. |
| EA | Environmental Assessment. |
| EA Supplement | Supplement prepared by FDA for the Environmental Assessment. |
| EIS | Environmental Impact Statement prepared by FDA. |
| FONSI | Finding of No Significant Impact prepared by FDA. |
NOTE: The "Environmental Requirement" column lists EAs that have been submitted to FDA by industry. Depending on the size of the EA these files may require significant time to download. All portable document format (pdf) files greater than 256 kB are indicated. For those instances when FDA has prepared an EA for a submission, the EA has been included with the FONSI in the "FDA Decision" column. Not all environmental documents have been included. In order to help reduce processing time and costs, some documents may not be displayed in this inventory because a preliminary review of those records indicated that the information is not required to be publicly disclosed. If you wish to review undisplayed documents (e.g., Material Safety Data Sheets or copies of journal articles and other copyrighted references), to see any other component of the environmental record (e.g., correspondence letters), or to seek something other than environmental information, please submit a FOIA request.
Sometimes company names may change because the ownership of the company changes. The name of the notifier in all documents that are linked solely within this web page reflects the name of the company at the time that the FCN became effective. To find the current name of the notifier, please refer to the Inventory of Effective Food Contact Substances.
| FCN No. | Food Contact Substance (FCS) | Environmental Requirement | FDA Decision |
|---|---|---|---|
| 1 | Silver sodium hydrogen zirconium phosphate, rhombohedral framework structure, of the general formula AgxNayHzZr2(PO4)3 | EA | FONSI |
| 2 | Amines, bis(hydrogenated rape-oil alkyl) methyl, N-oxides | EA | FONSI |
| 3 | Styrene-acrylic copolymers | EA | FONSI |
| 4 | Isophthalic acid or dimethyl isophthalate | EA (in PDF,* 5.90 MB) |
FONSI |
| 5 | Polybutadiene-graft-poly(methyl acrylate-co-acrylonitrile) | EA (in PDF,* 1.70 MB) |
FONSI |
| 6 | Completely hydrolyzed copolymer of acrylonitrile and trivinylcyclohexane ion-exchange resin | EA | FONSI |
| 7 | Woven wool felt | EA | FONSI |
| 8 | Ethylene terephthalate-2,6-naphthalate copolymers | EA (in PDF,* 1.59 MB) |
FONSI/EA Supplement |
| 9 | Poly(oxy-1,2-ethanediyloxycarbonyl-2,6-naphthalenedicarbonyl) homopolymer and copolymers with ethylene terephthalate | EA (in PDF,* 3.83 MB) |
FONSI/EA Supplement |
| 10 | Pyromellitic dianhydride | EA | FONSI |
| 11 | 4,5-Dichloro-2-n-octyl-3(2H)-isothiazolone | EA | FONSI |
| 12 | Industrial starch modified by treatment with greater than 5% and not more than 21% by weight 2,3-epoxypropyl trimethylammonium chloride | EA | FONSI |
| 13 | Dimethyl-2,6-naphthalene dicarboxylate or 2,6-naphthalene dicarboxylic acid | EA (in PDF,* 1.53 MB) |
FONSI |
| 14 | Dimethyl-2,6-naphthalene dicarboxylate or 2,6-naphthalene dicarboxylic acid | EA (in PDF,* 3.83 MB) |
FONSI |
| 15 | Benzenesulfonic acid, 2,2'-(1,2-ethenediyl)bis(5-((4-(bis(2-hydroxyethyl)amino)-6-((4-sulfophenyl)amino)-1,3,5-triazin-2-yl)amino)-, tetrasodium salt | EA | FONSI |
| 16 | Cemented carbide | EA | FONSI |
| 17 | Perfluorocarbon cured elastomer | EA | FONSI |
| 18 | Sodium acrylate/styrene sulfonate copolymer | EA (in PDF*) | FONSI/EA Supplement |
| 19 | Piperylene/2-methyl-2-butene/alpha-methylstyrene terpolymers | EA | FONSI |
| 20 | 2,2'-Methylenebis(4,6-di-tert-butylphenyl) 2-ethylhexyl phosphite | EA | FONSI |
| 21 | 2,2'-Methylenebis(4,6-di-tert-butylphenyl) 2-ethylhexyl phosphite | EA | FONSI |
| 22 | Phosphorous acid, cyclic neopentanetetrayl bis(2,6-di-tert-butyl-4-methylphenyl) ester | EA | FONSI |
| 23 | C.I. Pigment Red 277 | EA | FONSI |
| 24 | Tin-based alloy, ASTM B23-49 Grade 1 | EA | FONSI |
| 25 | C.I. Pigment Yellow 209 and C.I. Pigment Yellow 209:1 | EA | FONSI |
| 26 | C.I. Pigment Red 276 | EA | FONSI |
| 27 | C.I. Pigment Orange 79 | EA | FONSI |
| 28 | Hydrogenated styrene-butadiene block copolymers modified with maleic anhydride | EA (in PDF,* 476 kB) | FONSI |
| 29 | Tridecanol phosphite condensation product with butylidenebis(2-(1,1-dimethylethyl)-5-methyl-4,1-phenylene) | EA | FONSI |
| 30 | Copolymer of the sodium salt of acrylic acid with polyethyleneglycol allyl ether | EA (in PDF,* 827 kB) | FONSI |
| 31 | Fluorescein, disodium salt or dipotassium salt | EA (in PDF,* 265 kB) | FONSI |
| 32 | alpha-(Dinonylphenyl)-omega-hydroxypoly(oxy-1,2-ethanediyl) containing not more than 21 moles of ethylene oxide per mole of dinonylphenyl | EA (in PDF,* 333 kB) | FONSI |
| 33 | Silica, ((ethenyldimethylsilyl) oxy)- and ((trimethylsilyl) oxy)-modified | EA (in PDF*) | FONSI |
| 34 | Nylon 6/12 resins | EA (in PDF,* 556 kB) | FONSI |
| 35 | Dimethyl dicarbonate | EA | FONSI |
| 36 | Gum rosin | EA | FONSI |
| 37 | Dimethylolbutanoic acid | EA | FONSI |
| 38 | n-Octyl phosphonic acid (NOPA)-modified titanium dioxide | EA (in PDF,* 468 kB) | FONSI |
| 39 | 1,2-Bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamoyl) hydrazine | EA (in PDF*) | FONSI |
| 40 | Polyphenylene sulfide polymers | EA (in PDF*) | FONSI |
| 41 | Silicone acrylate resins | EA | FONSI |
| 42 | A grafted copolymer of cross-linked sodium polyacrylate identified as 2-propenoic acid, polymers with N,N-di-2-propenyl-2-propen-1-amine and hydrolyzed polyvinyl acetate, sodium salts, graft | EA (in PDF,* 1.42 MB) |
FONSI/EA Supplement |
| 43 | Nickel-iron alloy | EA | FONSI |
| 44 | Hexanedioic acid polymer with 1,3-benzenedimethanamine | EA (in PDF,* 646 kB) | FONSI/EA Supplement |
| 45 | Two quaternary amine (QAE) cellulose ion exchange resins | EA | FONSI |
| 46 | Salicylamide | EA (in PDF*) | FONSI |
| 47 | Zeolite A | EA | FONSI |
| 48 | Poly(ethylene-methyl acrylate-cyclohexenylmethyl acrylate) | EA (in PDF,* 738 kB) | FONSI |
| 49 | Nylon 6 polymers | EA | FONSI |
| 52 | High density agarose resin | EA (in PDF*) | FONSI |
| 53 | A mixture consisting of 63-72% oxidized bis(hydrogenated tallow alkyl) amines, 12-15% bis (hydrogenated tallow alkyl) amines, 4-8% (hydrogenated tallow alkyl) nitrones, and 5-12% (hydrogenated tallow alkyl) oximes | EA | FONSI |
| 54 | alpha-Sulfo-omega-(dodecyloxy)poly(oxyethylene), sodium salt | EA (in PDF,* 636 kB) | FONSI |
| 55 | Ion exchange resin that is a terpolymer of styrene, divinyl benzene and ethylvinyl benzene | EA | FONSI |
| 56 | Petroleum hydrocarbon resins (cyclopentadiene-type), hydrogenated | EA (in PDF*) | FONSI |
| 57 | Aromatic modified aliphatic hydrocarbon resin | EA (in PDF*) | FONSI |
| 58 | 2,2'-Methylenebis(4,6-di-tert-butylphenyl) 2-ethylhexyl phosphite | EA | FONSI |
| 59 | Glycine, N,N-bis[2-hydroxy-3-(2-propenyloxy)propyl]-, monosodium salt, reaction products with ammonium hydroxide and pentafluoroiodoethane-tetrafluoroethylene telomer | EA (in PDF*) | FONSI |
| 60 | GENOXTM EP, chemically identified as amines, bis(hydrogenated rape-oil alkyl)methyl, N-oxides | EA (in PDF*) | FONSI |
| 62 | Amorphous hydrogenated carbon coating produced from acetylene | EA (in PDF,* 2.80 MB) |
FONSI |
| 63 | Styrene block polymers with 2-methyl-1,3-butadiene and 1,3-butadiene, hydrogenated | EA (in PDF,* 349 kB) | FONSI |
| 64 | Diallyldimethylammonium chloride polymer with acrylamide | EA | FONSI |
| 67 | 3,6,9-Triethyl-3,6,9-trimethyl-1,2,4,5,7,8-hexoxonane | EA | FONSI |
| 68 | Butene-1, polymer with propylene | EA (in PDF,* 697 kB) | FONSI |
| 69 | (1) Styrene-butadiene-methacrylic acid terpolymer, (2) 1,2-benzisothiazolin-3-one, and (3) sulfosuccinic acid 4-ester with polyethylene glycol dodecyl ether, disodium salt | EA (in PDF*) | FONSI |
| 70 | Carbon monoxide-ethylene copolymer | EA (in PDF,* 877 kB) | FONSI/EA Supplement |
| 71 | Partially hydrolyzed (40-50%) polyvinyl alcohol, modified with up to 2 percent by weight crotonic acid | EA (in PDF*) | FONSI |
| 72 | Ethylene terephthalate-isophthalate copolymers | EA (in PDF*) | FONSI |
| 73 | Epoxy resin coatings that contain polyoxypropylenediamine | EA (in PDF*) | FONSI |
| 74 | Completely hydrolyzed tetra-polymer of divinyl benzene, ethyl vinyl benzene, acrylonitrile, and 1,7-octadiene | EA | FONSI |
| 75 | Ethylene-2-norbornene copolymer | EA (in PDF,* 538 kB) | FONSI |
| 76 | A modified, branched poly dimethyl hydrogen methylsiloxane | EA (in PDF*) | FONSI |
| 78 | Sebacic acid | EA (in PDF*) | FONSI |
| 79 | High silicon iron | EA | FONSI |
| 80 | 2,6-Di-tert-butyl-4-sec-butylphenol | EA (in PDF*) | FONSI |
| 83 | Poly(oxy(1,1'-biphenyl)-4,4'-diyloxy-1,4-phenylenesulfonyl-1,4-phenylene) | EA | FONSI |
| 84 | C.I. Pigment Yellow 212 | EA (in PDF*) | FONSI |
| 85 | Polyethylene terephthalate copolyesters (diethylene glycol-isophthalate modified) | EA (in PDF,* 1.28 MB) |
FONSI/EA Supplement |
| 87 | 1,4-Cyclohexanedimethanol | EA | FONSI |
| 88 | Terephthaloyl dichloride | EA (in PDF*) | FONSI |
| 89 | Polyethylene glycol mono-isotridecyl ether sulfate, sodium salt | EA (in PDF*) | FONSI |
| 90 | Epoxy resin coatings that contain 9,10-anthracenedione, 1-hydroxy-4-((4-methylphenyl)amino)- (C.I. Solvent Violet 13) | EA (in PDF*) | FONSI/EA Supplement |
| 91 | Epoxy resin coatings that contain 1-(2-aminoethyl) piperazine | EA (in PDF*) | FONSI/EA Supplement |
| 92 | Trimethylolpropane | EA (in PDF*) | FONSI |
| 93 | Vinyl neodecanoate | EA (in PDF,* 389 kB) | FONSI |
| 96 | Polyoxymethylene copolymers | Cat Ex 25.32(j) | Cat Ex Memo |
| 97 | Polyethylene glycol (400) monooleate | EA (in PDF,* 558 kB) | FONSI |
| 98 | 2-Propenoic acid, 2-methyl, monoester with 1,2-propanediol, polymer with methyl 2-propenoate, 2-propenoic acid and sodium 2-propenoate | EA (in PDF,* 271 kB) | FONSI |
| 99 | Hydroxymethyl-5,5-dimethylhydantoin (MMDMH), mixture with 1,3-bis(hydroxymethyl)-5,5-dimethylhydantoin (DMDMH) | EA (in PDF,* 564 kB) | FONSI |
| 100 | Polyvinyl alcohol | EA (in PDF*) | FONSI/EA Supplement |
| 101 | Perfluorocarbon cured elastomers | EA (in PDF*) | FONSI |
| 102 | Phenol, 2-(1,1-dimethylethyl)-6-methyl-4-(3-((2,4,8,10-tetrakis(1,1-dimethylethyl)dibenzo(d,f)(1,3,2)dioxaphosphepin-6-yl)oxy)propyl) | EA (in PDF*) | FONSI |
| 103 | Copolymers produced by the polymerization of 6-hydroxy-2-naphthoic acid with one or more of the following monomers: 4-hydroxybenzoic acid; 4,4'-biphenol; N-(4-hydroxyphenyl)acetamide; terephthalic acid; resorcinol; and isophthalic acid | EA (in PDF,* 472 kB) | FONSI |
| 104 | Hydroxymethyl-5,5-dimethylhydantoin (DMDMH), mixture with 1,3-bis(hydroxymethyl)-5,5-dimethylhydantoin (MMDMH) | EA (in PDF,* 1.06 MB) |
FONSI |
| 105 | Sodium acrylate/styrene sulfonate copolymer | EA (in PDF,* 275 kB) | FONSI |
| 106 | Styrene/butadiene/acrylonitrile copolymers (SBAN) | Cat Ex 25.32(i) | Cat Ex Memo |
| 107 | Polyethylene glycol | Cat Ex 25.32(j) | Cat Ex Memo |
| 109 | ((1,2,5,6-eta.)-1,5-cyclooctadiene) bis((4-(trimethylsilyl) phenyl)ethynyl)-platinum | Cat Ex 25.32(j) | Cat Ex Memo |
| 110 | Nitrile rubber-modified acrylonitrile-methyl acrylate copolymers | EA (in PDF,* 1.60 MB) |
FONSI |
| 111 | 2-Methyl-4-isothiazolin-3-one | Cat Ex 25.32(i) | Cat Ex Memo |
| 112 | Tris(2,4-di-tert-butylphenyl)phosphite | Cat Ex 25.32(i) | Cat Ex Memo |
| 113 | 2,4-Dimethyl-6-(1-methylpentadecyl)phenol | Cat Ex 25.32(i) | Cat Ex Memo |
| 115 | C.I. Pigment Red 149 | Cat Ex 25.32(i) | Cat Ex Memo |
| 116 | Benzene propanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy, C13-C15 branched and linear alkyl esters | Cat Ex 25.32(i) | Cat Ex Memo |
| 117 | Styrene-butyl acrylate copolymers | Cat Ex 25.32(i) | Cat Ex Memo |
| 118 | C.I. Pigment Red 178 | Cat Ex 25.32(i) | Cat Ex Memo |
| 119 | Xanthan Gum | Cat Ex 25.32(i) | Cat Ex Memo |
| 123 | Polyester-epoxy-urethane adhesives | Cat Ex 25.32(i) | Cat Ex Memo |
| 124 | Styrene block copolymers with 1,3-butadiene | EA (in PDF,* 763 kB) | FONSI |
| 125 | Polyphenylene ether | Cat Ex 25.32(i) | Cat Ex Memo |
| 126 | 1,9-Decadiene, 3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-, polymer with tetrafluoroethene and trifluoro(trifluoromethoxy)ethene | Cat Ex 25.32(j) | Cat Ex Memo |
| 127 | 1-Propene, 1,1,2,3,3,3-hexafluoro-, polymer with 1,1-difluoroethene and tetrafluoroethene modified with triallyl isocyanurate and 3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-1,9-diene | Cat Ex 25.32(j) | Cat Ex Memo |
| 128 | A copolymer of tetrafluoroethylene (TFE) and perfluoromethylvinyl ether (PFMVE) modified with 1,3,5-triallyl isocyanurate (TAIC) and 3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-1,9-diene | Cat Ex 25.32(j) | Cat Ex Memo |
| 129 | Ethene, tetrafluoro-, polymer with 1,1-difluoroethene and trifluoro(trifluoromethoxy)ethene modified with 1,3,5-triallyl isocyanurate (TAIC) and 3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-1,9-diene | Cat Ex 25.32(j) | Cat Ex Memo |
| 130 | Styrene-acrylic copolymers | Cat Ex 25.32(i) | Cat Ex Memo |
| 131 | 2-Methyl-4-isothiazolin-3-one | Cat Ex 25.32(q) | Cat Ex Memo |
| 132 | Quino(2,3-b)acridine-7, 14-dione, 4,11-dichloro-5,12-dihydro | EA (in PDF*) | FONSI |
| 133 | Bis-1,2-((N,N-diacetyl)amino-)ethane | EA (in PDF,* 1.91 MB) |
FONSI |
| 134 | Sodium zeolite A | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 135 | Dimethyl-2,6-naphthalene dicarboxylate (NDC) or 2,6-naphthalene dicarboxylic acid (NDA) | contact | |
| 137 | Anthranilamide | Cat Ex 25.32(i) | Cat Ex Memo |
| 140 | A mixture of peroxyacetic acid, acetic acid, hydrogen peroxide, and 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) | EA (in PDF,* 596 kB) | FONSI/EA Supplement |
| 141 | Cross-linked terpolymer of 1-vinylimidazole, 1-vinylpyrrolidone and 1,3-divinylimidazolidinone | EA (in PDF,* 502 kB) | FONSI |
| 142 | Silicones and siloxanes, dimethyl, methylhydrogen, reaction products with polyethylene glycol monoallyl ether acetate | EA (in PDF,* 256 kB) | FONSI/EA Supplement |
| 143 | Octadecanoic acid, methyl ester, reaction products with 1-(2-hydroxy-2-methylpropoxy)-2,2,6,6-tetramethyl-4-piperidinol | Cat Ex 25.32(i) | Cat Ex Memo |
| 144 | 5-Sulfo-1,3-benzenedicarboxylic acid, monosodium salt | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 145 | Ethylene phthalate polymers modified with 1,2,4,5-benzenetetracarboxylic dianhydride (pyromellitic dianhydride (PMDA)) | contact | |
| 146 | Poly-1-butene polymers and butene/ethylene copolymers | EA (in PDF,* 424 kB) | FONSI |
| 147 | Ethylene phthalate polymers modified with polybutadienediol (PBD) | contact | |
| 148 | 2-Acrylamido-2-methylpropanesulfonic acid | Cat Ex 25.32(i) | Cat Ex Memo |
| 150 | C.I. Pigment violet 19 | Cat Ex 25.32(i) | Cat Ex Memo |
| 151 | Pyromellitic dianhydride | contact | |
| 155 | Silicon dioxide | Cat Ex 25.32(i) | Cat Ex Memo with Cat Ex Supplement |
| 156 | Cellulose, regenerated polymer with epichlorohydrin, carboxymethyl 2-hydroxypropyl ether | Cat Ex 25.32(j) | Cat Ex Memo |
| 157 | Cellulose, regenerated, polymer with epichlorohydrin, 2-(diethylamino) ethyl 2-hydroxypropyl ether | Cat Ex 25.32(j) | Cat Ex Memo |
| 161 | Piperylene/2-methyl-2-butene copolymer resins and piperylene/2-methyl-2-butene/alpha-methylstyrene terpolymer resins | Cat Ex 25.32(i) | Cat Ex Memo |
| 162 | 2-Propenoic acid, methyl ester, telomer with 1-dodecanethiol, C16-C18 alkyl esters | Cat Ex 25.32(i) | Cat Ex Memo |
| 163 | A mixture of ca. 49 percent by weight of polyethylene glycol (400) monooleate and ca. 34 percent by weight of polyethylene glycol (400) dioleate | EA (in PDF,* 370 kB) | FONSI/EA Supplement |
| 164 | Phenol, 2-(5-chloro-2H-benzotriazol-2-yl)-4,6-bis(1,1-dimethylethyl) | Cat Ex 25.32(i) | Cat Ex Memo |
| 165 | Polyphenylene sulfide | Cat Ex 25.32(j) | Cat Ex Memo |
| 166 | Aromatic petroleum hydrocarbon resin, hydrogenated | EA (in PDF*) | FONSI |
| 168 | An approximately 1:1 ratio mixture of hydroxymethyl-5,5-dimethylhydantoin (MMDMH) and 1,3-bis(hydroxymethyl)-5,5-dimethylhydantoin (DMDMH) | EA (in PDF,* 830 kB) | FONSI |
| 172 | 5,7-Bis(1,1-dimethylethyl)-3-hydroxy-2(3H)-benzofuranone, reaction products with o-xylene | Cat Ex 25.32(i) | Cat Ex Memo |
| 173 | Polyacrylic acid homopolymer, or copolymer of acrylic acid and up to 10 percent alkyl (C10-C30) methacrylate, cross-linked with either allyl sucrose or allyl pentaerythritol | EA (in PDF*) | FONSI |
| 174 | Copolymers produced by the polymerization of 6-hydroxy-2-naphthoic acid and 4-hydroxybenzoic acid | EA (in PDF*) | FONSI |
| 175 | 2-Pyridinethiol-1-oxide, sodium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 176 | Phenol, 2-(1,1-dimethylethyl)-6-methyl-4-(3-((2,4,8,10-tetrakis(1,1-dimethylethyl)dibenzo(d,f)(1,3,2)dioxaphosphepin-6-yl)oxy)propyl) | Cat Ex 25.32(i) | Cat Ex Memo |
| 177 | Aluminum lithium carbonate hydroxide trihydrate | Cat Ex 25.32(i) | Cat Ex Memo |
| 178 | Polylactide polymers | EA (in PDF*) | FONSI/EA Supplement |
| 179 | Copolymers and polymers made from the reaction of dimethyl terephthalate or terephthalic acid with a mixture containing 99 to 0 mole percent of ethylene glycol and 1 to 100 mole percent of 1,4-cyclohexanedimethanol | EA (in PDF,* 4.23 MB) |
FONSI |
| 180 | Benzenesulfonic acid, 2,2'-(1,2-ethenediyl)bis(5-((4-(bis(2-hydroxyethyl)amino)-6-((4-sulfophenyl)amino)-1,3,5-triazin-2-yl)amino)-, tetrasodium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 181 | Benzenepropanoic acid, 3,5-bis(1,1-dimethylethyl)-4-hydroxy-, octadecyl ester | Cat Ex 25.32(i) | Cat Ex Memo |
| 182 | Polyamidoamine-ethyleneimine-epichlorohydrin resin | Cat Ex 25.32(i) | Cat Ex Memo |
| 183 | Butanedioic acid, dimethyl ester, polymer with 4-hydroxy-2,2,6,6-tetramethyl-1-piperidineethanol | Cat Ex 25.32(j) | Cat Ex Memo |
| 184 | Phenol, 2-(2H-benzotriazol-2-yl)-4,6-bis(1-methyl-1-phenylethyl) | Cat Ex 25.32(j) | Cat Ex Memo |
| 185 | Amorphous hydrogenated carbon coating | Cat Ex 25.32(i) | Cat Ex Memo |
| 186 | Cis-endo-bicyclo(2.2.1)heptane-2,3-dicarboxylic acid, disodium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 187 | Fluorinated polyurethane anionic resin | Cat Ex 25.32(i) | Cat Ex Memo |
| 189 | Di-(para-methylbenzylidene)sorbitol | Cat Ex 25.32(i) | Cat Ex Memo |
| 190 | Copolymers of methyl methacrylate, acrylonitrile, butadiene and styrene | Cat Ex 25.32(j) | Cat Ex Memo |
| 191 | Hydrolyzed tetraethyl silicate | Cat Ex 25.32(i) | Cat Ex Memo |
| 192 | 12H-Dibenzol(d,g)(1,3,2)dioxaphosphocin, 2,4,8,10-tetrakis(1,1-dimethylethyl)-6-((2-ethylhexyl)oxy) | Cat Ex 25.32(i) | Cat Ex Memo |
| 193 | Silver zinc zeolite | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 194 | Di-tert-amyl peroxide | Cat Ex 25.32(i) | Cat Ex Memo |
| 195 | Diphosphoric acid, polymers with ethoxylated reduced Me esters of reduced polymerized oxidized tetrafluoroethylene | Cat Ex 25.32(i) | Cat Ex Memo |
| 196 | 1-Dodecene | Cat Ex 25.32(i) | Cat Ex Memo |
| 197 | Copolymers (polyurethanes) produced from 4,4'-methylenebis(cyclohexylisocyanate), polytetramethylene glycol, and polyethylene glycol | Cat Ex 25.32(i) | Cat Ex Memo |
| 198 | A copolymer of dimethyl terephthalate, 1,3-dimethyl-5-sulfo-1,3-benzenedicarboxylate, sodium salt, and 1,6-hexanediol | Cat Ex 25.32(i) | Cat Ex Memo |
| 199 | A mixture of imidazolium and imidazoline compounds, 9-octadecenoic acid (9Z)-, reaction products with diethylenetriamine, cyclized, diethyl sulfate quaternized and amides, C18 and C18-unsaturated, N-(2-(2-(C17 and C17-unsaturated alkyl)-4,5-dihydro-1H-imidazol-1-yl)ethyl) | Cat Ex 25.32(i) | Cat Ex Memo |
| 200 | Pyromellitic dianhydride | contact | |
| 201 | 2H-Benzimidazole-2-thione, 1,3-dihydro-, 4(or 5)-methyl-, zinc salt(2:1) containing up to 4 percent by weight petroleum process oil | EA (in PDF*) | FONSI |
| 202 | Aluminum, hydroxybis[2,4,8,10-tetrakis(1,1-dimethylethyl)-6-hydroxy-12H-dibenzo[d,g][1,3,2]dioxaphosphocin 6-oxidato]- | Cat Ex 25.32(i) | Cat Ex Memo |
| 203 | Acetic acid ethenyl ester, polymer with alpha-hydro-omega-hydroxypoly(oxy-1,2-ethanediyl), hydrolyzed | Cat Ex 25.32(i) | Cat Ex Memo |
| 204 | A mixture of the lithium salts of stearic acid (69.5 weight percent), palmitic acid (25.8 weight percent), myristic acid (1.6 weight percent), arachidonic acid (1 weight percent), and other carboxylic acids (2.1 weight percent) | Cat Ex 25.32(i) | Cat Ex Memo |
| 206 | Copolymer of 2-perfluoroalkylethyl acrylate, 2-N,N-diethylaminoethyl methacrylate, and glycidyl methacrylate | EA (in PDF,* 4.57 MB) |
FONSI/EA Supplement |
| 208 | Acetic acid ethenyl ester, polymer with ethenol and dimethyl maleate (DMM) | Cat Ex 25.32(i) | Cat Ex Memo |
| 211 | Isophthalic acid | EA (in PDF,* 2.22 MB) |
FONSI |
| 212 | 2-Cyano-3,3-diphenyl-2-propenoic acid ethyl ester | Cat Ex 25.32(i) | Cat Ex Memo |
| 215 | Poly(ethylene-methyl acrylate-cyclohexenylmethyl acrylate) | EA (in PDF,* 10.5 MB) |
FONSI |
| 217 | 2-Cyano-3,3-diphenyl-2-propenoic acid 2-ethylhexyl ester | Cat Ex 25.32(i) | Cat Ex Memo |
| 220 | Methylmethacrylate-trimethylolpropane trimethacrylate copolymers | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 221 | An approximately 1:1 mixture of hydroxymethyl-5,5-dimethylhydantoin (MMDMH) and 1,3-bis(hydroxymethyl)-5,5-dimethylhydantoin (DMDMH), containing up to 8.5 percent by weight residual 5,5-dimethylhydantoin on a dry basis (DMH) | EA (in PDF,* 3.14 MB) |
FONSI |
| 222 | 1,5-Cyclooctadiene | EA (in PDF,* 2.96 MB) |
FONSI/EA Supplement |
| 224 | 2,2,4-Trimethyl-1,3-pentanediol diisobutyrate (TXIB) | EA (in PDF,* 3.92 MB) |
FONSI |
| 228 | Silaneamine, 1,1,1-trimethyl-N-(trimethylsylyl)-, hydrolysis products with silica or silica ((dimethylvinylsilyl)oxy)- and ((trimethylsilyl)oxy)-modified | Cat Ex 25.32(j) | Cat Ex Memo |
| 229 | Trilauryl phosphite | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 231 | Styrene-acrylic copolymers | Cat Ex 25.32(i) | Cat Ex Memo |
| 232 | Phosphorous acid, bis(2,4-bis(1,1-dimethylethyl)-6-methylphenyl)ethyl ester | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 233 | 2-Propenoic acid, homopolymer, calcium sodium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 234 | Phenol,2,2'-methylenebis(6-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyl)- | Cat Ex 25.32(i) | Cat Ex Memo |
| 235 | Tin antimony oxide | Cat Ex 25.32(i) | Cat Ex Memo |
| 236 | Poly(1,4-cyclohexylenedimethylene-1,4-cyclohexanedicarboxylate) | Cat Ex 25.32(j) | Cat Ex Memo |
| 237 | Quino(2,3-b)acridine-7,14-dione, 5,12-dihydro-, (1,3-dihydro-1,3-dioxo-2H-isoindol-2-yl)methyl derivatives | Cat Ex 25.32(i) | Cat Ex Memo |
| 238 | Diethylene glycol monobenzoate | Cat Ex 25.32(i) | Cat Ex Memo |
| 239 | A mixture consisting of 63-72 percent oxidized bis(hydrogenated tallow alkyl)amines, 12-15 percent bis(hydrogenated tallow alkyl)amines, 4-8 percent (hydrogenated tallow alkyl)nitrones, and 5-12 percent (hydrogenated tallow alkyl)oximes | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 244 | Styrene/butadiene/acrylonitrile copolymers (SBA) | Cat Ex 25.32(i) | Cat Ex Memo |
| 245 | A perfluorocarbon cured elastomer (PCE) | Cat Ex 25.32(j) | Cat Ex Memo |
| 246 | Fluorocarbon cured elastomer | Cat Ex 25.32(j) | Cat Ex Memo |
| 247 | A perfluorocarbon cured elastomer (PCE) | Cat Ex 25.32(j) | Cat Ex Memo |
| 248 | Silver zinc glass | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 250 | Poly(N-vinylformamide), 20-100 percent hydrolyzed, chloride or sulfate salts | Cat Ex 25.32(i) | Cat Ex Memo |
| 251 | Hexanedioic acid, polymer with 1,3-benzenedimethanamine | Cat Ex 25.32(i) | Cat Ex Memo |
| 253 | Iso-butylene/maleic anhydride copolymer, sodium salt cross-linked with 1.9 percent by weight glycerol and 1.25 percent by weight 1,4-butanediol | Cat Ex 25.32(i) | Cat Ex Memo |
| 254 | Methyl acrylate-divinylbenzene-diethylene glycol divinyl ether terpolymer, aminolyzed with dimethylaminopropylamine and partially quaternized with methyl chloride | Cat Ex 25.32(j) | Cat Ex Memo |
| 255 | 3-Cyclohexane-1-carboxylic acid, 6-((di-2-propenylamino)carbonyl)-, (1R,6R), reaction products with pentafluoroiodoethane-tetrafluoroethylene telomer, ammonium salts | Cat Ex 25.32(i) | Cat Ex Memo |
| 256 | N,N,N',N'-Tetrakis(2-hydroxyethyl)hexanediamide | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 257 | α-Sulpho-ω-(dodecyloxy)poly(oxyethylene)sodium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 259 | C.I. Pigment Yellow 189 | Cat Ex 25.32(i) | Cat Ex Memo |
| 260 | Tetrafluoroethylene-hexafluoropropylene-vinylidene fluoride copolymers | Cat Ex 25.32(i) | Cat Ex Memo |
| 262 | Nylon 6/69 | EA (in PDF*) | FONSI |
| 263 | Pyrrolo(3,4-c)pyrrole-1,4-dione, 2,5-dihydro-3,6-bis(4-(octadecylthio)phenyl) | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 267 | A mixture of (1) imidazolium compounds, 2-(C17 and C17 unsaturated alkyl)-1-(2-(C18 and C18 unsaturated amido)ethyl)-1-ethyl-4,5-dihydro-, ethyl sulfates; and (2) amides, C18 and C18-unsaturated, N-(2-(2-(C17 and C17-unsaturated alkyl)-4,5-dihydro-1H-imidazol-1-yl)ethyl) | Cat Ex 25.32(i) | Cat Ex Memo |
| 268 | Tris(2,4-di-tert-butylphenyl)phosphite | Cat Ex 25.32(i) | Cat Ex Memo |
| 270 | A silver-zinc-sodium aluminosilicate zeolite containing up to 2.9 percent by weight of silver and 19 percent by weight of zinc | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 273 | 2-Propen-1-aminium, N,N-dimethyl-N-2-propenyl-, chloride, polymer with 2-propenoic acid and N-2-propen-1-amine hydrochloride, 2,2'-azobis(2-methylpropanimidamide) dihydrochloride-initiated | Cat Ex 25.32(i) | Cat Ex Memo |
| 274 | 2-Naphthalenesulfonic acid, 6-hydroxy-5((4-methoxy-2-sulfophenyl)azo)-, strontium salt (1:1) | Cat Ex 25.32(i) | Cat Ex Memo |
| 275 | Silver-magnesium-sodium-boron-phosphate glass | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 276 | Hexanedioic acid, polymer with N-(2-aminoethyl)-1,2-ethanediamine, N-acetyl derivative, epichlorohydrin quaternized | Cat Ex 25.32(i) | Cat Ex Memo |
| 277 | 2-Propenoic acid, 2-cyano-3,3-diphenyl-, 2,2-bis{[(2-cyano-1-oxo-3, 3-diphenyl-2-propenyl)oxy]methyl}-1,3-propanediyl ester | Cat Ex 25.32(i) | Cat Ex Memo |
| 278 | REPLACED BY FCN #573 | ||
| 279 | Tetradecanoic acid, lithium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 280 | Copolyesters of dimethyl terephthalate or terephthalic acid with ethylene glycol, 1,4-cyclohexanedimethanol and diethylene glycol | EA (in PDF,* 413 kB) | FONSI |
| 282 | 2-Propenoic acid, homopolymers, calcium sodium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 283 | 2-Propenoic acid, polymers with N,N-di-2-propenyl-2-propen-1-amine and hydrolyzed polyvinyl acetate, sodium salts, graft | EA (in PDF,* 851 kB) | FONSI |
| 284 | Industrial starch modified by treatment with greater than 5 percent and not more than 21 percent by weight 2,3-epoxypropyl trimethylammonium chloride | Cat Ex 25.32(i) | Cat Ex Memo |
| 285 | 2-Oxepanone, polymer with 1,4-butanediol | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 286 | 2-Methyl-4-isothiazolin-3-one | Cat Ex 25.32(q) | Cat Ex Memo |
| 288 | Trilauryl phosphite | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 289 | Boron nitride | Cat Ex 25.32(i) | Cat Ex Memo |
| 290 | 2-Propenoic acid, 2-methyl-,1,2-ethanediyl ester, polymer with oxiranylmethyl 2-methyl-2-propenoate, hydrogen sulfate | Cat Ex 25.32(j) | Cat Ex Memo |
| 292 | Cross-linked terpolymer of 1-vinylimidazole, 1-vinylpyrrolidone and 1,3-divinylimidazolidinone | EA (in PDF,* 372 kB) | FONSI |
| 293 | Pigment Yellow 382E | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 294 | Zinc zeolite A | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 295 | Hydrogen peroxide | EA (in PDF,* 544 kB) | FONSI |
| 296 | Silver nitrate | EA (in PDF,* 576 kB) | FONSI |
| 297 | BALINIT A, chemically identified as titanium nitride | Cat Ex 25.32(j) | Cat Ex Memo |
| 298 | BALINIT B, chemically identified as titanium carbonitride | Cat Ex 25.32(j) | Cat Ex Memo |
| 299 | BALINIT C, chemically identified as tungsten carbide/carbon + chromium | Cat Ex 25.32(j) | Cat Ex Memo |
| 300 | BALINIT D, BALINIT CNI, and BALINIT CROVEGA, chemically identified as chromium nitride | Cat Ex 25.32(j) | Cat Ex Memo |
| 301 | BALINIT DLC, BALINIT TRITON, chemically identified as diamond-like carbon | Cat Ex 25.32(j) | Cat Ex Memo |
| 302 | BALINIT FUTURA, BALINIT FUTURA NANO, and BALINIT X.TREME, chemically identified as titanium aluminum nitride | Cat Ex 25.32(j) | Cat Ex Memo |
| 303 | Siloxanes and silicones, dimethyl, methylhydrogen reaction products with polyethylene glycol and/or polyethylene-polypropylene glycol monoallyl ether, methyl ether terminated | EA (in PDF,* 662 kB) | FONSI |
| 307 | Butanedioic acid, compd. with 1,1',1"-nitrilotris[2-propanol] | Cat Ex 25.32(i) | Cat Ex Memo |
| 308 | 5,5-Dimethylhydantoin (DMH) | EA (in PDF,* 450 kB) | FONSI |
| 310 | 5,7-Bis(1,1-dimethylethyl)-3-hydroxy-2(3H)-benzofuranone, reaction products with o-xylene | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 311 | Copolymers of 2-perfluoroalkylethyl acrylate, 2-N,N-diethylaminoethyl methacrylate, and glycidyl methacrylate | EA (in PDF,* 635 kB) | FONSI/EA Supplement |
| 312 | 2-Ethyl-2-(hydroxymethyl)-1,3-propanediol | Cat Ex 25.32(i) | Cat Ex Memo |
| 314 | 2-Propen-1-ol, reaction products with pentafluoroiodoethane-tetrafluoroethylene telomer, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine | Cat Ex 25.32(i) | Cat Ex Memo |
| 315 | 1,2-Benzisothiazolin-3-one | Cat Ex 25.32(q) | Cat Ex Memo |
| 316 | 1,2-Bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamoyl)hydrazine | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 320 | Copolymer of 2-imidazolidinone, 1,3-diethenyl-,polymer with 1-ethenyl-1H-imidazole and 1-ethenyl-2-pyrrolidinone | EA (in PDF,* 413 kB) | FONSI |
| 321 | Styrene block polymer with 2-methyl-1,3-butadiene, hydrogenated | EA (in PDF,* 409 kB) | FONSI |
| 323 | A mixture containing peroxyacetic acid, hydrogen peroxide, acetic acid, 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP), and water | EA (in PDF,* 624 kB) | FONSI |
| 324 | alpha-Methylstyrene dimer (2,4-diphenyl-4-methyl-1-pentene; benzene, 1,1'-(1,1-dimethyl-3-methylene-1,3-propanediyl)bis | Cat Ex 25.32(i) | Cat Ex Memo |
| 325 | 1-Propanesulfonic acid, 2-methyl-2-[(1-oxo-2-propenyl)amino]-, monosodium salt, polymer with N,N'-methylene bis[2-propenamide], peroxydisulfuric acid ([(OH)S(O)2]2O2) diammonium salt-initiated | Cat Ex 25.32(j) | Cat Ex Memo |
| 326 | N-(2-Hydroxyethyl)octadecanamide | EA (in PDF,* 530 kB) | FONSI/EA Supplement |
| 327 | Polypropylene glycol monobutyl ether | EA (in PDF,* 608 kB) | FONSI/EA Supplement |
| 328 | Phosphorous acid, bis[2,4-bis(1,1-dimethylethyl)-6-methylphenyl] ethyl ester | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 329 | Silicon dioxide | Cat Ex 25.32(i) | Cat Ex Memo |
| 330 | C.I. Pigment Violet 19 | Cat Ex 25.32(i) | Cat Ex Memo |
| 332 | Cross-linked reaction product of an acrylic resin, a silane coupling agent, and a urethane prepolymer | Cat Ex 25.32(i) | Cat Ex Memo |
| 333 | Reaction product of polyvinyl alcohol (PVOH) and tetraethoxysilane (TEOS) | Cat Ex 25.32(i) | Cat Ex Memo |
| 334 | 1,3-Dibromo-5,5-dimethylhydantoin | EA (in PDF,* 2.31 MB) |
FONSI |
| 336 | Styrene-acrylic copolymers as further described in your submission (FCN 336) | Cat Ex 25.32(i) | Cat Ex Memo |
| 337 | Trilauryl phosphite containing not more than 1 percent by weight triisopropanolamine | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 338 | Copolymers of 2-perfluoroalkylethyl acrylate, 2-N,N-diethylaminoethyl methacrylate, and glycidyl methacrylate | EA (in PDF,* 634 kB) | FONSI |
| 339 | 1,4-Dioxa-8-azaspiro[4,5]decane,7,7,9,9-tetramethyl | EA (in PDF*) | FONSI |
| 340 | Pigment Red 122 | Cat Ex 25.32(i) | Cat Ex Memo |
| 341 | 2,4-Bis[(dodecylthio)methyl]-6-methylphenol | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 342 | Hexanedioic acid, polymer with hexahydro-2H-azepin-2-one and 1,6-hexanediamine [Nylon 6/66] | EA (in PDF,* 374 kB) | FONSI |
| 344 | 2-Propenoic acid, 2-methyl, monoester with 1,2-propanediol, polymer with methyl 2-propenoate, 2-propenoic acid and sodium 2-propenoate | EA (in PDF*) | FONSI |
| 345 | Hydrogenated petroleum hydrocarbon resin (cyclopentadiene-type) | EA (in PDF,* 402 kB) | FONSI |
| 346 | 2,2,5,7,8-Pentamethyl-6-chromanol | Cat Ex 25.32(i) | Cat Ex Memo |
| 348 | 1,3-Benzenedicarboxylic acid, 5-sulfo-, 1,3-dimethyl ester, sodium salt, polymer with dimethyl 1,4-benzenedicarboxylate, dimethyl pentanedioate and 1,2-ethanediol | EA (in PDF,* 433 kB) | FONSI |
| 349 | Polyester-polyurethane resin-acid dianhydride adhesive | EA (in PDF,* 270 kB) | FONSI |
| 350 | Hydrogenated styrene butadiene block copolymers | Cat Ex 25.32(j) | Cat Ex Memo |
| 351 | A type of zeolite in which silver, zinc, and ammonium ions have been exchanged for sodium ions | EA (in PDF*) | FONSI |
| 352 | Di-(para-methylbenzylidene) sorbitol | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 355 | 1,3-Benzenedicarboxylic acid, 5-sulfo-1,3-dimethyl ester, sodium salt, polymer with dimethyl 1,4-benzenedicarboxylate, dimethyl pentanedioate, poly(ethylene glycol), and 1,2-ethanediol. | EA (in PDF,* 922 kB) | FONSI |
| 356 | C.I. Pigment Red 122 | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 357 | 1,3-Dibromo-5,5-dimethylhydantoin | EA (in PDF,* 755 kB) | FONSI |
| 358 | Polysiloxane di-methyl, vinyl-terminated, reaction product with 1,2,4-trivinylcyclohexane polymer with polydimethylsiloxane, hydrogen terminated | Cat Ex 25.32(i) | Cat Ex Memo |
| 359 | Benzoic acid, 2,4-dihydroxy-, polymer with formaldehyde and 1-naphthalenol, sodium salt | EA (in PDF*) | FONSI |
| 360 | Polyethylene terephthalate copolymers (diethylene glycol-azelaic acid modified) | EA (in PDF,* 350 kB) | FONSI |
| 361 | Tetraethylenepentamine | EA (in PDF*) | FONSI |
| 362 | Siloxanes and silicones, di-methyl, 3-(4-hydroxy-3-methoxyphenyl)propyl group-terminated, polymers with bisphenol A, carbonic dichloride and 4-(1-methyl-1-phenylethyl)phenol | EA (in PDF*) | FONSI |
| 363 | Siloxanes and silicones, di-methyl, 3-(4-hydroxy-3-methoxy-3-methoxyphenyl)propyl group-terminated, polymers with bisphenol A, carbonic dichloride and 4-(1-methyl-1-phenylethyl)phenol | EA (in PDF*) | FONSI |
| 365 | 1,4-Benzenediamine, N-(1-3-dimethylbutyl)-N'-phenyl-, reaction products with ethylene oxide mono[[C12-rich C10-13-branched alkyl thio]methyl] derivatives | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 366 | 1,2-Bis(3,5-di-tert-butyl-4-hydroxyhydrocinnamoyl)hydrazine | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 368 | Ethylene/1-butene copolymers | EA (in PDF,* 352 kB) | FONSI |
| 369 | Siloxanes and silicones, di-Me, hydrogen-terminated, reaction products with acrylic acid and 2-ethyl-2-[(2-propenyloxy)methyl]-1,3-propanediol | Cat Ex 25.32(i) | Cat Ex Memo |
| 370 | Dibutyl sebacate | EA (in PDF*) | FONSI/EA Supplement |
| 371 | 1,2-Benzisothiazolin-3-one | Cat Ex 25.32(q) | Cat Ex Memo |
| 372 | 1,4-Benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, hexamethylene diisocyanate and not more than 1 percent by weight of the polyhydric alcohol | EA (in PDF,* 879 kB) | FONSI |
| 373 | Monoisopropanolamine (MIPA) | Cat Ex 25.32(i) | Cat Ex Memo |
| 374 | Poly(12-hydroxystearic acid) end-capped with stearic acid | Cat Ex 25.32(i) | Cat Ex Memo |
| 375 | Poly(tricyclo[5.2.1.0(2,6)]decane-3,5-diyl-ethylene)-co-(bicyclo[3.3.0]octane-2,4-diyl-ethylene)-co-(tricyclo[6.4.0.0(2,6)]dodecane-3,5-diyl-ethylene)] | Cat Ex 25.32(j) | Cat Ex Memo |
| 376 | Polyethylene terephthalate copolyesters (diethylene glycol-isophthalate modified) | EA (in PDF,* 430 kB) | FONSI |
| 377 | 5,7-Bis(1,1-dimethylethyl)-3-hydroxy-2(3H)-benzofuranone, reaction products with o-xylene | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 379 | Aromatic petroleum hydrocarbon resin, hydrogenated | EA (in PDF,* 377 kB) | FONSI |
| 380 | 1,3-Benzenedicarboxylic acid, polymer with 1,4-benzenedicarboxylic acid and 1,6-hexanediamine | Cat Ex 25.32(j) | Cat Ex Memo |
| 381 | REPLACED BY FCN #449 | ||
| 384 | Ammonium bromide solution, 35 percent | Cat Ex 25.32(q) | Cat Ex Memo |
| 385 | Tris (2,4-di-tert-butylphenyl)phosphite | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 386 | Octadecyl, 3,5-di-tert-butyl-4-hydroxyhydrocinnamate | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 387 | Siloxanes and silicones, di-Me, polymers with silica-1,1,1-trimethyl-N-(trimethylsilyl)silanamine hydrolysis products and silicic acid trimethylsilyl ester | EA (in PDF,* 628 kB) | FONSI/EA Supplement |
| 388 | Mixture of potassium stearyl phosphate, polyoxyethylene lauryl ether phosphate potassium salt, and polyoxyethylene tridecyl ether phosphate potassium salt | EA (in PDF,* 351 kB) | FONSI/EA Supplement |
| 389 | Mixture of imidazolium and imidazoline compounds, 1H-imidazolium, 1-ethyl-2-(8Z)-8-heptadecenyl-4,5-dihydro-1-[2-[[(9Z)-1-oxo-9-octadecenyl]amino]ethyl]-, ethyl sulfate and 9-octadecenamide, N-[2-[2-(8Z)-8-heptadecenyl-4,5-dihydro-1H-imidazol-1-yl]ethyl]-, (9Z)- | Cat Ex 25.32(i) | Cat Ex Memo |
| 391 | Chlorine dioxide | Cat Ex 25.32(q) | Cat Ex Memo |
| 392 | Acrylonitrile-butadiene copolymer cross-linked with divinylbenzene | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 393 | Phosphonic acid, [[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]methyl]-, diethyl ester | contact | |
| 395 | Copolymer of n-butyl methacrylate and iso-butyl methacrylate | Cat Ex 25.32(i) | Cat Ex Memo |
| 398 | Perfluoropolyether dicarboxylic acid, ammonium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 399 | Nylon MXD-6 (also known as hexanedioic acid, polymer with 1,3-benzenedimethanamine) meeting the analytical specifications in 21 CFR 177.1500(b) item 10.1 and used in conjunction with cobalt neodecanoate | Cat Ex 25.32(i) | Cat Ex Memo |
| 401 | Silicon dioxide | Cat Ex 25.32(i) | Cat Ex Memo |
| 402 | Copolymer of tetrafluoroethylene and perfluoromethylvinyl ether, modified with 3,3,4,4,5,5,6,6,7,7,8,8-dodecafluoro-1,9-diene and 1,3,5-triallyl cyanurate or 1,3,5-triallyl isocyanurate | Cat Ex 25.32(j) | Cat Ex Memo |
| 403 | 2-[2,4-Bis(1,1-dimethylethyl)phenoxy]5-butyl-5-ethyl-1,3,2-dioxaphosphorinane, which may contain not more than 1 percent by weight triisopropanolamine | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 404 | 4,4'-[Isopropylidenebis(p-phenyleneoxy)]diphthalic dianhydride/4,4'-diaminodiphenyl sulfone copolymer | Cat Ex 25.32(j) | Cat Ex Memo |
| 405 | Ethylene-2-norbornene copolymer | EA (in PDF,* 507 kB) | FONSI/EA Supplement |
| 406 | Hexanedioic acid, polymer with azacyclotridecan-2-one and alpha-hydro-omega-hydroxypoly(oxy-1,2-ethanediyl) | EA (in PDF*) | FONSI |
| 407 | 2-Bromo-2-nitro-1,3-propanediol | Cat Ex 25.32(q) | Cat Ex Memo |
| 408 | C16-18 fatty acid esters of a branched C20 alcohol as described in the notification | Cat Ex 25.32(j) | Cat Ex Memo |
| 411 | Copper, (1,3,8,16,24-hexabromo-2,4,9,10,11,15,17,22,23,25- decachloro-29H,31H-phthalocyanato(2-)-N29,N30,N31,N32)-, (SP-4-2)- | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 413 | Polyester-polyurethane resin-acid dianhydride adhesives | EA (in PDF,* 438 kB) | FONSI |
| 415 | A blend of LDPE and LDPE grafted with vinyltrimethoxysilane (LDPE/VTMOS-LDPE) containing up to 50 percent LDPE grafted with vinyltrimethoxysilane (VTMOS-LDPE) | EA (in PDF,* 340 kB) | FONSI |
| 416 | Diphosphoric acid, polymers with ethoxylated reduced methyl esters of reduced polymerized oxidized tetrafluoroethylene. This substance is also known as phosphate esters of ethoxylated perfluoroether, prepared by reaction of ethoxylated perfluoroether diol with phosphorous pentoxide or pyrophosphoric acid. | Cat Ex 25.32(i) | Cat Ex Memo |
| 417 | 1,3-Benzenedicarboxylic acid, polymer with 1,4-benzenedicarboxylic acid, 1,6-hexanediamine, and 4,4'-methylenebis[2-methylcyclohexanamine] | EA (in PDF,* 394 kB) | FONSI/EA Supplement |
| 418 | α-Sulfo-ω-(dodecyloxy) poly(oxyethylene) sodium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 419 | n-Octyl phosphonic acid (NOPA)- modified titanium dioxide, (produced by chemically reacting NOPA with titanium dioxide to achieve a treatment level of 0.85% by weight of NOPA on the pigment) | EA (in PDF,* 365 kB) | FONSI/EA Supplement |
| 420 | 2-Butyl-2-ethyl-1,3-propanediol | Cat Ex 25.32(i) | Cat Ex Memo |
| 421 | Poly(terephthaloyl chloride/p-phenylenediamine) | EA (in PDF,* 304 kB) | FONSI |
| 423 | Copolymers produced by the polymerization of 6-hydroxy-2-naphthoic acid with one or more of the following monomers: 4-hydroxybenzoic acid; 4,4'-biphenol; N-(4-hydroxyphenyl)acetamide; terephthalic acid; resorcinol; and isophthalic acid such that a minimum of 55 percent of the polymer units are derived from 6-hydroxy-2-naphthoic acid alone or in combination with 4-hydroxybenzoic acid, not more than 25 percent of the polymer units are derived individually from 4,4'-biphenol, N-(4-hydroxyphenyl) acetamide and terephthalic acid, and not more than 15 percent of the polymer units are derived individually from resorcinol and isophthalic acid. The copolymers should be manufactured and characterized as described in the notification. | EA (in PDF,* 312 kB) | FONSI |
| 424 | Ethylene/octene copolymers containing up to 50 weight percent polymer units derived from 1-octene | EA (in PDF,* 341 kB) | FONSI |
| 425 | Hexanedioic acid, polymer with 2-ethyl-2-(hydroxymethyl)-1,3-propanediol, α-hydro-ω-hydroxypoly(oxy-1,4-butanediyl), 3-methyl-1,5-pentanediol and 1-methyl-1,3-propanediyl bis[(6-isocyanatohexyl)carbamate] | Cat Ex 25.32(i) | Cat Ex Memo |
| 426 | Quino[2,3-b]acridine-7,14-dione, 5,12-dihydro-2,9-dimethyl, also known as dimethylquinacridone and C.I. Pigment Red 122 | Cat Ex 25.32(i) | Cat Ex Memo |
| 427 | Propenoic acid, homopolymer, sodium salt | EA (in PDF,* 1.25 MB) |
FONSI |
| 428 | 2,2'-(1,4-Phenylene)bis[4H-3,1-benzoxazin-4-one] | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 429 | Copolymer of styrene, methyl methacrylate, and glycidyl methacrylate | Cat Ex 25.32(j) | Cat Ex Memo |
| 430 | Metallic pigment comprised of borosilicate glass flakes, 70 to 95 percent, coated with pure silver metal, 5 to 30 percent by weight | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 431 | Tin(IV) oxide | Cat Ex 25.32(i) | Cat Ex Memo |
| 432 | Silver-magnesium-calcium-phosphate-borate-glass | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 433 | Silver-magnesium-aluminum-phosphate glass | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 434 | Silver-magnesium-calcium-phosphate-borate-glass | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 435 | Poly(ethylene-maleic anhydride) grafted cyclodextrin(s) | Cat Ex 25.32(i) | Cat Ex Memo |
| 436 | 1,4-Dioxa-8-azaspiro[4.5]decane, 7,7,9,9-tetramethyl- | EA (in PDF,* 312 kB) | FONSI |
| 437 | Ethoxylated primary linear alcohols of greater than 10% ethylene oxide by weight, having molecular weights of 390 - 7,000 | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 438 | Monoisopropanolamine (MIPA) | Cat Ex 25.32(i) | Cat Ex Memo |
| 439 | Industrial starch modified by treatment with greater than 5 percent and not more than 21 percent by weight 2,3-epoxypropyltrimethyl-ammonium chloride | Cat Ex 25.32(i) | Cat Ex Memo |
| 442 | Alcohol ethoxylate in which the alcohol contains from 12 to 22 carbon atoms and the ethoxylate chain contains from 4 to 20 repeating ethoxylate units | EA (in PDF,* 380 kB) | FONSI/EA Supplement |
| 443 | Agarose, polymer with (chloromethyl)oxirane, 2-hydroxy-3(3-sulfopropoxy)propyl ethers, sodium salts | Cat Ex 25.32(j) | Cat Ex Memo |
| 444 | Poly(isophthaloyl chloride/m-phenylenediamine) | EA (in PDF,* 307 kB) | FONSI |
| 445 | Chlorine dioxide | EA (in PDF,* 384 kB) | FONSI |
| 446 | Di-μ-chlorobis((1,2,5,6-eta)-1,5-cyclooctadiene)dirhodium | Cat Ex 25.32(j) | Cat Ex Memo |
| 447 | An aqueous mixture of peroxyacetic acid, hydrogen peroxide, acetic acid, sulfuric acid, and 1-hydroxyethylidine-1,1-diphosphonic acid (HEDP) | Cat Ex 25.32(q) | Cat Ex Memo |
| 448 | Polyester-polyurethane resin formulated from (a)(1) polyester-polyurethanediol resins prepared by the reaction of a mixture of polybasic acids and polyhydric alcohols listed in 21 CFR 175.300(b)(3)(vii) and 1,6-hexanediol, dimethylolbutanoic acid, 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate, and/or 1,3-bis(isocyanatomethyl)benzene. The FCS will be manufactured and characterized as described in the notification. (2) An optional trimethoxysilane coupling agent containing an epoxy group, as described in the notification, not to exceed 3 percent by weight of the cured adhesive. (b) Urethane cross-linking agent comprising not more than 20 percent by weight of the cured adhesive, and formulated from trimethylolpropane adduct of 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate and/or trimethylolpropane adduct of 1,3-bis(isocyanatomethyl)benzene and/or 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate cyanurate. The content of the 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate cyanurate shall not exceed 14 percent by weight of the cured adhesive. | Cat Ex 25.32(i) | Cat Ex Memo |
| 449 | Propylene/ethylene copolymers containing up to 16 weight percent polymer units derived from ethylene REPLACES FCN #381 |
EA (in PDF,* 342 kB) | FONSI |
| 450 | An aqueous solution of sodium chlorite and chlorine dioxide containing up to 1200 mg/kg sodium chlorite and up to 30 mg/kg chlorine dioxide | EA (in PDF,* 2.14 MB) |
FONSI/EA Supplement |
| 451 | 2-Propenoic acid, 2-methyl-, dodecyl ester, polymer with docosyl 2-propenoate, eicosyl 2-propenoate, octadecyl 2-propenoate and tetradecyl 2-methyl-2-propenoate | EA (in PDF,* 239 kB) | FONSI |
| 452 | Styrene-methyl methacrylate-butyl acrylate-butadiene copolymer | EA (in PDF,* 312 kB) | FONSI |
| 453 | 1,3-Dibromo-5,5-dimethylhydantoin (DBDMH) | EA (in PDF,* 802 kB) | FONSI |
| 454 | [1,1'-Biphenyl]-4,4'-diol, polymer with 1,1'-sulfonylbis[4-chlorobenzene] | Cat Ex 25.32(j) | Cat Ex Memo |
| 455 | N-Phenylbenzenamine reaction products with 2,4,4-trimethylpentene | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 456 | Sodium sulfate salt of ethoxylated (7 moles of ethylene oxide) n- and iso-undecyl alcohol (C11) | Cat Ex 25.32(i) | Cat Ex Memo |
| 458 | Tetracarbonyl di-μ-chlorodirhodium (I), Trade name: Rhodium carbonyl chloride dimer, Formula: (Rh(CO)2Cl)2 |
Cat Ex 25.32(j) | Cat Ex Memo |
| 459 | Styrene-maleic anhydride copolymer, sodium salt | EA (in PDF,* 260 kB) | FONSI |
| 460 | Benzenemethanaminium, N,N-dimethyl-N-(2-(2-(4-(1,1,3,3-tetramethylbutyl)phenoxy)ethoxy)-ethyl)-, chloride, also known as Benzethonium Chloride USP | EA (in PDF*) | FONSI |
| 461 | The FCS is a cross-linked reaction product of an acrylic resin, a silane coupling agent, and a urethane polymer. This reaction product is formed in situ as a layer applied to an appropriate base film. The acrylic resin consists of a copolymer of styrene, methyl methacrylate, methacrylic acid, t-butyl methacrylate, and hydroxyethyl methacrylate. The silane coupling agent consists of γ-isocyanatopropyl-trimethoxysilane (IPSi). The urethane prepolymer is an NCO-terminated prepolymer consisting of trimethylol propane adducts of 3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate (isophorone diisocyanate, or IPDI) and 1,3-bis(isocyanatomethyl)benzene (m-xylylene diisocyanate, m-XDI). | Cat Ex 25.32(i) | Cat Ex Memo |
| 462 | Cross-linked reaction product of polyvinyl alcohol (PVOH) and tetraethoxysilane (TEOS) | Cat Ex 25.32(i) | Cat Ex Memo |
| 463 | 1,3-Benzenedicarbonyl dichloride, polymer with 1,4-benzenedicarbonyl dichloride, 1,3-benzenediol, carbonic dichloride and 4,4'-(1-methylethylidene) bisphenol, 4-(1-methyl-1-phenylethyl)phenyl ester | EA (in PDF*) | FONSI |
| 464 | C.I. Pigment Yellow 163 | Cat Ex 25.32(i) | Cat Ex Memo |
| 465 | N,N'-1,6-Hexanediylbis[2-amino-benzamide] | Cat Ex 25.32(i) | Cat Ex Memo |
| 469 | Industrial starch modified by treatment with greater than 5 percent and not more than 21 percent by weight of 2,3-epoxypropyl trimethylammonium chloride | Cat Ex 25.32(i) | Cat Ex Memo |
| 472 | REPLACED BY FCN #526 | ||
| 473 | 2,6-Naphthalenedicarboxylic acid, polymer with 1,4-benzenedicarboxylic acid, 1,4-butanediol and 4,4'-(1,3,6,8-tetrahydro-1,3,6,8-tetraoxobenzo[lmn][3,8]phenanthroline-2,7-diyl)bis[benzoic acid] | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 474 | Tetradecanoic acid, lithium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 475 | Polylactide (PLA) polymers containing from 6 to 16 weight percent D-lactic acid polymer units (High D PLA). The polymers will be manufactured and characterized as further described in the notification. | EA (in PDF,* 660 kB) | FONSI |
| 476 | Silver-zinc-magnesium-aluminum-calcium-sodium-borate-phosphate glass | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 477 | Poly(oxy-1,2-ethanediyl), alpha-eicosyl-omega-hydroxy | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 479 | Copolymer of vinylidene chloride and butyl acrylate, containing up to 10 weight percent polymer units derived from butyl acrylate | EA (in PDF*) | FONSI |
| 480 | Alpha alkene (C20-C24) polymers with maleic anhydride reaction products with 2,2,6,6-tetramethyl-4-piperidinamine | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 481 | Tetrafluoroethylene-ethylene-3,3,4,4,5,5,6,6,6-nonafluoro-1-hexene terpolymer | Cat Ex 25.32(j) | Cat Ex Memo |
| 482 | Hydrogenated aromatic petroleum hydrocarbon resin, which may be partially hydrogenated | EA (in PDF,* 480 kB) | FONSI |
| 483 | Dimethyl dicarbonate (DMDC) | Cat Ex 25.32(k) | Cat Ex Memo |
| 484 | Isobutylene-butene copolymer | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 485 | Polybetaine polysiloxane copolymer | EA (in PDF,* 575 kB) | FONSI |
| 486 | Ethylene/propylene copolymers polymerized in the presence of propylene homopolymer complying with 21 CFR 177.1520(c) Item 1.1, to produce an inseparable blend of the two polymers. | EA (in PDF,* 419 kB) | FONSI |
| 487 | 2-Propen-1-ol, reaction products with pentafluoroiodoethane-tetrafluoroethylene telomer, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine | Cat Ex 25.32(i) | Cat Ex Memo |
| 488 | 4-(4-Phenoxyphenoxy) benzoic acid homopolymer | Cat Ex 25.32(j) | Cat Ex Memo |
| 489 | tert-Butylperoxy-3,5,5-trimethylhexanoate | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 490 | 2-Propenoic acid, 2-methyl-, 2-ethyl-2-[{(2-methyl-1-oxo-2-propenyl)oxy}methyl]-1,3-propenediyl ester, polymer with ethyl-2-propenoate and methyl 2-methyl-2-propenoate | Cat Ex 25.32(i) | Cat Ex Memo |
| 491 | Sodium sulfate salt of ethoxylated (7 moles of ethylene oxide) - and iso-undecyl alcohol (C11) | Cat Ex 25.32(i) | Cat Ex Memo/ Cat Ex Supplement |
| 493 | 2,2'-(1,4-Phenylene) bis[4H-3,1-benzoxazin-4-one] | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 494 | 2,4-di-tert-Pentyl-6-[1-(3,5-di-tert-pentyl-2-hydroxyphenyl) ethyl]phenyl acrylate | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 495 | Sodium dichloroisocyanurate and sodium bromide mixture containing 85-94 weight-percent sodium dichloroisocyanurate, and 5-9 weight-percent sodium bromide | Cat Ex 25.32(q) | Cat Ex Memo |
| 498 | Polyethylene terephthalate copolyesters (including isophthalic acid and/or diethylene glycol modified) that otherwise comply with 21 CFR 177.1630 or an applicable effective Food Contact Notification, containing up to 0.85 weight percent sodium dimethyl 5-sulfoisophthalate units | EA (in PDF,* 438 kB) | FONSI/EA Supplement |
| 500 | 1,4-Cyclohexanedicarboxylic acid, polymer with 1,4-cyclohexanedimethanol, 2-(3-hydroxypropyl)-6-[(hydroxypropyl)amino]-1H-benz[de]isoquinoline-1,3-(2H)-dione and 1,3-pentanediamine, 2-hydroxy-3-phenoxypropyl ester | Cat Ex 25.32(i) | Cat Ex Memo |
| 501 | Hydrogenated polymers prepared from one or more of the following: 1-decene, 1-dodecene,and 1-octene | EA (in PDF,* 373 kB) | FONSI |
| 502 | Hexanedioic acid, polymer with hexahydro-2H-azepin-2-one and 1,6-hexanediamine | EA (in PDF,* 351 kB) | FONSI/EA Supplement |
| 504 | 1,2-Benzisothiazolin-3-one | Cat Ex 25.32(q) | Cat Ex Memo |
| 505 | Benzamide, 3,3'-[(2-chloro-5-methyl-1,4-phenylene)bis[imino(1-acetyl-2-oxo-2,1-ethanediyl)azo]] bis[4-chloro-N-(3-chloro-2-methylphenyl)-(9Cl) | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 506 | Polyether sulfone-polyphenylene sulfone block copolymer CAS name: [1,1'-Biphenyl]-4,4'-diol, polymer with 1,1'-sulfonylbis(4-chlorobenzene) and 4,4'-sulfonylbis(phenol) | Cat Ex 25.32(j) | Cat Ex Memo |
| 507 | Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyoxyethylene mono-Me ether and polyoxypropylene mono-Me ether | EA (in PDF*) | FONSI/EA Supplement |
| 508 | alpha-Sulfo-omega-(dodecyloxy)(polyoxyethylene) sodium, salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 509 | Bis (p-ethylbenzylidene) sorbitol | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 510 | Copolymer of 1,1-difluoroethylene, hexafluoropropene, tetrafluoroethylene, and a halogenated alkene, optionally cured with triallyl isocyanurate and 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane | Cat Ex 25.32(j) | Cat Ex Memo |
| 511 | Copolymer of 1,1-difluoroethylene, tetrafluoroethylene, trifluoromethyl trifluorovinyl ether and a halogenated alkene, optionally cured with triallyl isocyanurate and 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane | Cat Ex 25.32(j) | Cat Ex Memo |
| 512 | Industrial starch modified by treatment with greater than 5 percent, and not more than 21 percent by weight 2,3-epoxypropyl trimethylammonium chloride | Cat Ex 25.32(i) | Cat Ex Memo |
| 513 | A mixture of 35-60 percent hydroxysulfinoacetic acid, disodium salt, 10-60 percent hydroxysulfoacetic acid, disodium salt, and 0-40 percent sodium sulfite | Cat Ex 25.32(i) | Cat Ex Memo |
| 514 | Lithium 12-hydroxystearate | Cat Ex 25.32(i) | Cat Ex Memo |
| 515 | 12H-Dibenzo[d,g][1,3,2]dioxaphosphocin, 2,4,8,10-tetrakis(1,1-dimethylethyl)-6-hydroxy-,6-oxide, lithium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 516 | Siloxanes and Silicones, di-Me, 3-hydroxypropyl Me, ethers with polyoxyethylene mono-Me ether and polyoxypropylene mono-Me ether | Cat Ex 25.32(i) | Cat Ex Memo |
| 517 | Polysulfone-polyphenylene sulfone block copolymer - CAS name: [1,1'-Biphenyl]-4,4'-diol, polymer with 4,4'-(1-methylethylidene) bis[phenol] and 1,1'-sulfonylbis[4-chlorobenzene] | Cat Ex 25.32(j) | Cat Ex Memo |
| 518 | 2-Propen-1-ol, reaction products with pentafluoroiodoethane-tetrafluoroethylene telomer, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine | Cat Ex 25.32(i) | Cat Ex Memo |
| 519 | Phenol,4-(1,1-dimethylethyl)-, polymer with sulfur chloride | Cat Ex 25.32(i) | Cat Ex Memo |
| 522 | Styrene-1,3-butadiene block copolymer containing 60 - 75 weight-percent of polymer units derived from styrene | EA (in PDF,* 381 kB) | FONSI |
| 524 | Tris (2,4-di-tert-butylphenyl) phosphite | Cat Ex 25.32 (i) and (j) | Cat Ex Memo |
| 526 | 1,3-Benzenedicarboxylic acid, polymer with 1,3-benzenedimethanamine and hexanedioic acid REPLACES FCN #472 |
EA (in PDF,* 384 kB) | FONSI/EA Supplement |
| 527 | 1,3-Propanediol, 2-ethyl-2-(hydroxymethyl) | Cat Ex 25.32 (i) and (j) | Cat Ex Memo |
| 528 | Agarose, cross-linked with epichlorohydrin and derivatized with 1,4-butane sultone, supported on tungsten carbide beads | Cat Ex 25.32(j) | Cat Ex Memo |
| 529 | Phosphorous acid, cyclic neopentanetetrayl-bis(2,4-di-tert-butylphenyl)ester containing not more than 1 percent by weight triisopropanolamine | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 531 | Agarose, polymer with (chloromethyl)oxirane, 2-hydroxy-3-(2-hydroxy-3-(trimethylammonio)propoxy)propyl ethers, sulfate salts | Cat Ex 25.32(j) | Cat Ex Memo |
| 532 | 2,2'-Methylenebis(6-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyl)phenol) | Cat Ex 25.32(i) | Cat Ex Memo |
| 533 | Hydrogenated polymers prepared from one or more of the following monomers: 1-decene, 1-dodecene, and 1-octene | EA (in PDF,* 333 kB) | FONSI |
| 534 | Dicetyl peroxydicarbonate | Cat Ex 25.32(i) | Cat Ex Memo |
| 535 | A type of zeolite in which silver, copper, and ammonium ions have been exchanged for sodium ions | Cat Ex 25.32(j) | Cat Ex Memo |
| 537 | 2,2'-(1,4-Phenylene)bis[4H-3,1-benzoxazin-4-one] | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 538 | Perfluoropolyether dicarboxylic acid, ammonium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 539 | A copolymer of 4-bromo-3,3,4,4-tetrafluoro-1-butene, ethylene, tetrafluoroethylene and trifluoromethyl trifluorovinyl ether optionally cured with triallyl isocyanurate and 2,5-dimethyl-2,5-di(tert-butylperoxy)hexane | Cat Ex 25.32(j) | Cat Ex Memo |
| 540 | 3-Chloro-2-hydroxypropyltrimethylammonium chloride | Cat Ex 25.32(i) | Cat Ex Memo |
| 541 | Poly[[6-[(1,1,3,3-tetramethybutyl)amino]-s-triazine-2,4-diyl] [2,2,6,6-tetramethyl-4-piperidyl)imino]hexamethylene[(2,2,6,6-tetramethyl-4-piperidyl)imino]] | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 542 | 2-Propen-1-ol, reaction products with 1,1,1,2,2,3,3,4,4,5,5,6,6-tridecafluoro-6-iodohexane, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine | Cat Ex 25.32(i) | Cat Ex Memo |
| 544 | 5,7-Bis(1,1-dimethylethyl)-3-hydroxy-2(3H)-benzofuranone, reaction products with o-xylene | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 545 | Styrene, methyl methacrylate and glycidyl methacrylate copolymers | EA (in PDF,* 531 kB) | FONSI |
| 546 | 1,3-Benzenedicarboxylic acid, 5-sulfo-, monolithium salt | EA (in PDF,* 433 kB) | FONSI/EA Supplement |
| 547 | Polyethylene terephthalate copolyesters (diethylene glycol-isophthalate modified) prepared by the condensation of dimethyl terephthalate or terephthalic acid and ethylene glycol with one or more of the following: dimethyl isophthalate, isophthalic acid, and diethylene glycol. The finished polymer shall contain a total of up to 16 mole-percent of total diethylene glycol and isophthalate units, with the diethylene glycol content expressed as a mole-percent of the total glycol units and the isophthalate content expressed as a mole-percent of the total isophthalate/terephthalate units. | EA (in PDF,* 421 kB) | FONSI/EA Supplement |
| 548 | Zeolite Na-P | Cat Ex 25.32(i) | Cat Ex Memo |
| 549 | Silicon dioxide with a topcoat of a polymer of hexamethyldisiloxane | Cat Ex 25.32(i) | Cat Ex Memo |
| 550 | Copper, [C,C,C,C-tetrachloro-29H,31H-phthalocyaninato(2-)-N29, N30, N31, N32] | Cat Ex 25.32(i) | Cat Ex Memo |
| 551 | Trimethylolpropane | Cat Ex 25.32(i) | Cat Ex Memo |
| 553 | Ethanedioic acid, diethyl ester, polymer with 2,3-dihydro-9,10-dihydroxy-1,4-anthracenedione, 1,4-dihydroxy-9,10-anthracenedione and 1,3-pentanediamine | Cat Ex 25.32(i) | Cat Ex Memo |
| 554 | 2-Propenoic acid, homopolymer, sodium salt (with a weight average molecular weight of 2300 to 5700 Daltons and a weight average molecular weight to number average molecular weight ratio of not more than 6.3) | EA (in PDF,* 332 kB) | FONSI/EA Supplement |
| 555 | 2-Hydroxyethyl methacrylate | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 556 | Phosphonic acid, [[3,5-bis(1,1-dimethylethyl)-4-hydroxyphenyl]methyl]-, diethyl ester | EA (in PDF*) | FONSI |
| 558 | 1,4-Benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, hexamethylene diisocyanate and not more than 1 percent by weight of a polyhydric alcohol, as described in FCN 372 | EA (in PDF*) | FONSI |
| 560 | p-Chloro-m-cresol | Cat Ex 25.32(j) | Cat Ex Memo |
| 561 | A mixture containing peroxyacetic acid, hydrogen peroxide, acetic acid, 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP), and water | EA (in PDF,* 433 kB) | FONSI/EA Supplement |
| 563 | Dimethyl sulfoisophthalate, sodium salt (DMSIP). [The CAS nomenclature is 1,3-Benzenedicarboxylic acid, 5-sulfo-, 1,3-dimethyl ester, sodium salt.] | EA (in PDF,* 509 kB) | FONSI/EA Supplement |
| 564 | Copolymer of divinylbenzene and ethylvinylbenzene | Cat Ex 25.32(j) | Cat Ex Memo |
| 566 | Poly(N-vinylformamide), 20-100 percent hydrolyzed, chloride or sulfate salts. The FCS is specifically known as one of the following: 1. formamide, N-ethenyl-, polymer with ethanamine, hydrochloride 2. formamide, N-ethenyl-, polymer with ethanamine, sulfate 3. formamide, ethenyl-, homopolymer, hydrolyzed, hydrochlorides |
Cat Ex 25.32(i) | Cat Ex Memo |
| 567 | Bromine chloride (BrCl) | Cat Ex 25.32(q) | Cat Ex Memo |
| 569 | A mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one at a ratio of 3 parts to 1 part by weight. The mixture may contain magnesium or sodium nitrate at a 1 to 1 ratio (weight/weight) with the sum of the isothiazolinone ingredients. | Cat Ex 25.32(q) | Cat Ex Memo |
| 571 | Extruded polystyrene and cross-linked polyvinylpyrrolidone | EA (in PDF,* 281 kB) | FONSI |
| 572 | Amines, bis(hydrogenated rape-oil alkyl)methyl, N-oxides | Cat Ex 25.32(i) | Cat Ex Memo |
| 573 | Copolymer of tetrafluoroethylene, perfluoromethylvinylether and 1-iodo-2-bromo-tetrafluoroethane intended to be cross-linked with triallylisocyanurate. REPLACES FCN #278 | Cat Ex 25.32(j) | Cat Ex Memo |
| 574 | Polyglycolic acid | EA (in PDF,* 516 kB) | FONSI |
| 575 - 577 | Silicon nitride containing up to 14.5 percent aluminum oxide, yttrium oxide, and/or titanium dioxide | Cat Ex 25.32(j) | Cat Ex Memo |
| 578 - 585 | Tungsten carbide containing up to 16.0 percent cobalt with up to 6.5 percent chromium, titanium carbide, tantalum carbide, niobium carbide, and/or vanadium carbide | Cat Ex 25.32(j) | Cat Ex Memo |
| 586 - 591 | Tungsten carbide containing up to 11.5 percent nickel with up to 1.9 percent chromium, tantalum carbide, niobium carbide, molybdenum carbide, and/or vanadium carbide | Cat Ex 25.32(j) | Cat Ex Memo |
| 592 | Cross-linked reaction product of polyvinyl alcohol (PVOH) and tetraethoxysilane (TEOS) coupled with the trimethoxysilane-based coupling agent described in the notification | Cat Ex 25.32(i) | Cat Ex Memo |
| 594 | Copolymer of styrene, methyl methacrylate, and glycidyl methacrylate | EA (in PDF,* 564 kB) | FONSI |
| 595 | Industrial starch modified by treatment with greater than 5 percent, and not more than 21 percent by weight 2,3-epoxypropyl trimethylammonium chloride | Cat Ex 25.32(i) | Cat Ex Memo |
| 597 | 2,2,4-Trimethyl-1,3-pentanediol diisobutyrate | Cat Ex 25.32(i), (j), and EA (in PDF,* 309 kB) |
Cat Ex Memo/ FONSI |
| 598 | A copolymer of propylene, tetrafluoroethylene, and 3,3,3-trifluoropropene cured with a salt of a quaternary ammonium compound and phenol, 4,4'-(2,2,2-trifluoro-1-(trifluoromethyl)ethylidene)bis-. | Cat Ex 25.32(j) | Cat Ex Memo |
| 599 | Copolymer of polyfluorooctyl methacrylate, 2-N,N-diethylaminoethylmethacrylate, 2-hydroxyethylmethacrylate, and 2,2'-ethylenedioxydiethyldimethacrylate | Cat Ex 25.32(i) | Cat Ex Memo |
| 602 | 3-Pyridinecarbonitrile, 4-methyl-2,6-bis[(4-methylphenyl)amino]-5-[[2-(trifluoromethyl)-phenyl]azo]- | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 604 | Copolymer of polyfluorooctyl methacrylate, 2-N,N-diethylaminoethylmethacrylate, 2-hydroxyethylmethacrylate, and 2,2'-ethylenedioxydiethyldimethacrylate | Cat Ex 25.32(i) | Cat Ex Memo |
| 607 | Benzenesulfonic acid, 4-[[1-[[(2-methylphenyl)amino)]carbonyl]-2-oxopropyl]azo]-3-nitro-, calcium salt (2:1). (C.I. Pigment Yellow 62) | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 608 | 1,2-Cyclohexanedicarboxylic acid, calcium salt (1:1), (1R, 2S)-rel- | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 614 | Zeolite Na-P | Cat Ex 25.32(i) | Cat Ex Memo |
| 615 | N-[3,5-Bis-(2,2-dimethyl-propionylamino)-phenyl]-2,2-dimethyl-propionamide | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 616 | Poly(1,4-benzene dicarboxylic acid dimethyl ester, 1,3-benzene dicarboxylic acid dimethyl ester, 1,4-butanediol, ethylene oxide, propylene oxide) | EA (in PDF,* 389 kB) | FONSI/EA Supplement |
| 617 | Poly(1,4-benzene dicarboxylic acid dimethyl ester, 1,4-butanediol, ethylene oxide, propylene oxide) | EA (in PDF,* 405 kB) | FONSI/EA Supplement |
| 618 | Fatty acids, C14-20, esters with pentaerythritol | Cat Ex 25.32(i) | Cat Ex Memo |
| 619 | Platinum, [(2,5,6-.eta.)-3-(1-acetyl-2-oxopropyl)bicyclo[2.2.1]hept-5-en-2-yl](2,4-pentanedionato-O,O') | Cat Ex 25.32(j) | Cat Ex Memo |
| 621 | Poly(1,4-phenylenecarbonyl-1,4-phenyleneoxy | Cat Ex 25.32(j) | Cat Ex Memo |
| 624 | Poly[(bis(isoindol-2-yl-1,3-dione)-1,3-phenylene)-4,4'-(1-methylethylidene)bisphenol] | EA (in PDF,* 615 kB) | FONSI |
| 625 | A mixture of peroxyacetic acid, hydrogen peroxide, and 1-hydroxyethylidine-1,1-diphosphonic acid, with or without an optional adjuvant system composed of a mixture dimethyl sebacate (up to 20 percent), dimethyl succinate (up to 0.8 percent), dimethyl adipate (68-76 percent) and dimethyl glutarate (4-12 percent) | EA (in PDF*) | FONSI/EA Supplement |
| 626 | Trilauryl phosphite | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 627 | A copolymer of styrene and butadiene having a styrene polymer unit content of 60 percent - 74 percent | EA (in PDF,* 499 kB) | FONSI/EA Supplement |
| 628 | Copolymer of 2-perfluoroalkylethyl acrylate, 2-(dimethylamino)ethyl methacrylate, and oxidized 2-(dimethylamino)ethyl methacrylate | Cat Ex 25.32(i) | Cat Ex Memo |
| 629 | Silane, dichlorodimethyl-, reaction products with silica | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 630 | Methyl formate | Cat Ex 25.32(r) | Cat Ex Memo |
| 631 | 2,5-Furandione, polymer with 1-propene | EA (in PDF,* 455 kB) | FONSI |
| 632 | Magnesium(2+) 12-hydroxyoctadecanoate | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 633 | Aluminum hydroxide magnesium hydroxide carbonate | EA (in PDF,* 791 kB) | FONSI |
| 634 | Benzoic acid, 2-hydroxy, monosodium salt | EA (in PDF,* 550 kB) | FONSI/EA Supplement |
| 635 | Polyethylene terephthalate copolyesters (diethylene glycol-isophthalate modified) prepared by the condensation of dimethyl terephthalate or terephthalic acid with ethylene glycol and with one or more of the following: dimethyl isophthalate, isophthalic acid, and diethylene glycol. The finished polymer shall contain a total of not more than 10 mole-percent of diethylene glycol and isophthalate units, with the diethylene glycol content expressed as a mole-percent of the total glycol units and the isophthalate content expressed as a mole-percent of the total isophthalate/terephthalate units. | EA (in PDF,* 482 kB) | FONSI |
| 636 | Benzenesulfonic acid, 2,2'-(1,2-ethenediyl)bis(5-((4-(bis(2 hydroxyethyl)amino)-6-((4-sulfophenyl)amino)-1,3,5-triazin-2-yl)amino)-, tetrasodium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 637 | Copolymer of 2,6-xylenol and 2,3,6-trimethylphenol | EA (in PDF,* 316 kB) | FONSI/EA Supplement |
| 638 | Benzoic acid, 2,2'-[(benzoylimino)bis[2,1-ethanediyl(5-cyano-2-hydroxy-4-methyl-6-oxo-1,3(6H)-pyridinediyl)azo]]bis-, diethyl ester (9CI) | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 639 | 2,4-Bis[(dodecylthio)methyl]-6-methylphenol | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 641 | A mixture of peroxyacetic acid, hydrogen peroxide, and 1-hydroxyethylidine-1,1-diphosphonic acid | EA (in PDF*) | FONSI/EA Supplement |
| 642 | Copolymer of monoacryloxyethyl succinate (MAES)and monoacryloxyethyl hexahydrophthalate (MAHP), and lauryl acrylate (LA). The ratio MAES:MAHP is in the range from 75:25 to 50:50 percent by weight. LA may be used at 0-10 percent by weight of the total monomer units. | Cat Ex 25.32(i) | Cat Ex Memo |
| 643 | Siloxanes and silicones, di-Me | Cat Ex 25.32(i) | Cat Ex Memo |
| 644 | Chlorine dioxide | EA (in PDF,* 1.63 MB) |
FONSI |
| 645 | Chlorine dioxide | EA (in PDF,* 629 kB) | FONSI/EA Supplement |
| 646 | Copolymers of 2-perfluoroalkylethyl acrylate, 2-N,N-diethylaminoethyl methacrylate, glycidyl methacrylate, acrylic acid, and methacrylic acid | Cat Ex 25.32(i) and EA (in PDF,* 1.09 MB) | Cat Ex Memo/ FONSI |
| 647 | Formamide, N,N-1,6-hexanediylbis[N-(2,2,6,6-tetramethyl-4-piperidinyl)]- | Cat Ex 25.32(i) | Cat Ex Memo |
| 649 | Polyethylene terephthalate, modified with a derivative of hexamethyldisilazane and tetraethyl orthosilicate | EA (in PDF,* 540 kB) | FONSI |
| 650 | Hydrogenated styrene butadiene (15 percent styrene to 85 percent butadiene, 67 percent styrene to 33 percent butadiene, or both grades in combination) used in conjunction with cobalt stearate | Cat Ex 25.32(i) | Cat Ex Memo |
| 652 | 2,2'-Methylenebis(6-(2H-benzotriazol-2-yl)-4-(1,1,3,3-tetramethylbutyl)phenol) | Cat Ex 25.32(i) | Cat Ex Memo |
| 653 | Cross-linked 2-propenoic acid, homopolymer, sodium salt | EA (in PDF,* 604 kB) | FONSI |
| 654 | 2-Propenoic acid, polymer with N-ethenylformamide, sodium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 656 | Pyrrolo[3,4-c]pyrrole-1,4-dione, 3,6-bis[3-(dodecylsulfonyl) phenyl]-2,5-dihydro- | Cat Ex 25.32(i) | Cat Ex Memo |
| 657 | Sodium xylene sulfonate | EA (in PDF,* 569 kB) | FONSI |
| 659 | Hexanedioic acid, polymer with hexahydro-2H-azepin-2-one, bis(4-aminocyclohexyl)methane and 1,6-hexanediamine (Nylon 6/66/136) | Cat Ex 25.32(i) | Cat Ex Memo |
| 660 | C10-C12 Ethoxylated alcohol | EA (in PDF,* 559 kB) | FONSI |
| 662 | Nonitol, 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]- | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 663 | Sulfonic acids, C10-C18 alkane, phenyl esters | EA (in PDF*) | FONSI |
| 664 | N,N'-bis(phenylmethyl)hexanediamide used in conjunction with cobalt neodecanoate | Cat Ex 25.32(i) | Cat Ex Memo |
| 665 | Hexanedioic acid, polymer with 1,3-benzenedimethanamine, meeting the analytical specifications in 21 CFR 177.1500(b) item 10.2, when tested by the method given in 21 CFR 177.1500(d) | Cat Ex 25.32(i) | Cat Ex Memo |
| 666 | 2-Propenoic acid, polymer with N-ethenylformamide, sodium salt, hydrolyzed, hydrochlorides | Cat Ex 25.32(i) | Cat Ex Memo |
| 668 | Chlorine dioxide | EA (in PDF,* 7.63 MB) |
FONSI/EA Supplement |
| 669 | 1,4-Cyclohexanedicarboxylic acid, polymer with 1,5-bis[[1-(hydroxymethyl)propyl]amino]-9,10-anthracenedione, 1,4-cyclohexanedimethanol, hexanedioic acid, and 2-methyl-1,5-pentanediamine, reaction products with phenyl ether | Cat Ex 25.32(i) | Cat Ex Memo |
| 670 | A mixture of peroxyacetic acid, hydrogen peroxide, and 1-hydroxyethylidine-1,1-diphosphonic acid, with or without an optional adjuvant system composed of a mixture dimethyl sebacate (up to 20 percent), dimethyl succinate (up to 0.8 percent), dimethyl adipate (68-76 percent) and dimethyl glutarate (4-12 percent) | EA (in PDF,* 1.15 MB) |
FONSI/EA Supplement |
| 671 | Poly(oxy-1,2-ethanediyl), alpha-hydro-omega-hydroxy- | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 673 | D,L-Aspartic acid, N-(1,2-dicarboxyethyl)-, tetrasodium salt | EA (in PDF,* 548 kB) | FONSI/EA Supplement |
| 675 | Mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one at a ratio of 3 parts to 1 part by weight | Cat Ex 25.32(i) | Cat Ex Memo |
| 676 | Octyltriethoxysilane-modified titanium dioxide where the addition of octyltriethoxysilane does not exceed 1.6 percent by weight of the pigment | EA (in PDF,* 382 kB) | FONSI/EA Supplement |
| 677 | Nylon MXD-6 (also known as hexanedioic acid, polymer with 1,3-benzenedimethanamine) meeting the analytical specifications in 21 CFR 177.1500(b), item 10.2 and used in conjunction with cobalt stearate | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 678 | Sulfonic acids, C10-18-alkane, sodium salts | Cat Ex 25.32(i) | Cat Ex Memo |
| 679 | Benzene, ethenyl-, polymer with 1,3-butadiene, hydrogenated | Cat Ex 25.32(j) and EA (in PDF,* 596 kB) | Cat Ex Memo/ FONSI |
| 680 | Styrene-acrylonitrile copolymers (SAN) containing 30-35 weight percent polymer units derived from acrylonitrile | Cat Ex 25.32(j) | Cat Ex Memo |
| 681 | 3-Chloro-2-hydroxypropyltrimethylammonium chloride | Cat Ex 25.32(i) | Cat Ex Memo |
| 684 | Poly(butyl)acrylate containing no more than 10 weight percent of total polymer units from one or more of the following monomers: methyl methacrylate, methacrylic acid, ethylene glycol dimethacrylate and N-methylolmethacrylamide | Cat Ex 25.32(i) | Cat Ex Memo |
| 685 | Benzenesulfonic acid, 2,2'-(1,2-ethenediyl)bis(5-(4-(bis(2-hydroxyethyl)amino)-6-((4- sulfophenyl)amino)-1,3,5-triazin-2-yl)amino)- tetrasodium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 686 | Di(p-tolylidene)sorbitol (DPTS) | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 687 | Decanedioic acid polymer with 2-hydroxypropanoic acid and 1,2-propanediol, block- | EA (in PDF,* 551 kB) | FONSI/EA Supplement |
| 688 | N-Ethyl-N-hydroxy-ethanamine | EA (in PDF,* 412 kB) | FONSI |
| 689 | 1,4-Benzenedicarboxylic acid polymer with 1,4-cyclohexanedimethanol and 1,2-ethanediol, with 1,4-cyclohexanedimethanol (consisting of 70 percent trans isomer and 30 percent cis isomer) representing 35 to 80 mole percent of the diol units and 1,2-ethanediol representing 65 to 20 mole percent of the diol units | EA (in PDF,* 1.33 MB) |
FONSI |
| 691 | A mixture of peroxyacetic acid, hydrogen peroxide, and 1-hydroxyethylidine-1,1-diphosphonic acid, with or without an optional adjuvant system composed of a mixture dimethyl sebacate (up to 20 percent by weight), dimethyl succinate (up to 0.8 percent by weight), dimethyl adipate (68-76 percent by weight) and dimethyl glutarate (4-12 percent by weight) | EA (in PDF,* 1.19 MB) |
FONSI/EA Supplement |
| 692 | Hypochlorous acid electrolytically generated in dilute solution with pH control | EA (in PDF*) | FONSI/EA Supplement |
| 694 | Poly(12-hydroxystearic acid)-polyethyleneimine copolymer | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 695 | 1H-Azepine-1-carboxamide, N,N',N''-[(2,4,6-trioxo-1,3,5-triazine-1,3,5(2H,4H,6H)-triyl) tris[methylene(3,5,5-trimethyl-3,1-cyclohexanediyl)]]tris[hexahydro-2-oxo-] | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 697 | Zeolite A in which silver and zinc ions have been exchanged for sodium ions | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 698 | 2-n-Octyl-4-isothiazolin-3-one(OIT) | Cat Ex 25.32(q) | Cat Ex Memo |
| 699 | A mixture of peroxyacetic acid, hydrogen peroxide, and 1-hydroxyethylidine-1,1-diphosphonic acid | EA (in PDF,* 656 kB) | FONSI |
| 701 | 1-Ethynyl-1-cyclohexanol | Cat Ex 25.32(j) | Cat Ex Memo |
| 702 | Carbonic dichloride, polymer with 4,4'-cyclohexylidenebis[2-methylphenol] and 4,4'-(1- methylethylidene)bis[phenol], bis[4-(1-methyl-1-phenylethyl)phenyl] ester | EA (in PDF,* 554 kB) | FONSI/EA Supplement |
| 704 | Mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-4-isothiazolin-3-one at a ratio of 3 parts to 1 part by weight | Cat Ex 25.32(i) | Cat Ex Memo |
| 705 | 1-Octadecanol, phosphate, potassium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 706 | Potassium lauryl phosphate | Cat Ex 25.32(i) | Cat Ex Memo |
| 707 | 2-Butenedioic (Z)-, ammonium salt, homopolymer, hydrolyzed, sodium salts | EA (in PDF,* 477 kB) | FONSI |
| 708 | Propylene/ethylene copolymers containing up to 28 weight percent polymer units derived from ethylene | EA (in PDF*) | FONSI |
| 709 | 2-Propenoic acid, sodium salt, homopolymer | Cat Ex 25.32(i) | Cat Ex Memo |
| 710 | Anthra[2,1,9-def:6,5,10-d'e'f']diisoquinoline-1,3,8,10(2H,9H)-tetrone,2,9-bis[2,6-bis (1-methylethyl)phenyl]-5,6,12,13-tetraphenoxy- | Cat Ex 25.32(i) | Cat Ex Memo |
| 711 | Styrene-1,3-butadiene block copolymer containing 60 - 75 weight-percent of polymer units derived from styrene | EA (in PDF,* 434 kB) | FONSI |
| 712 | 2-Propionic acid, 2-methyl-, methyl ester, polymer with 1,4-butanediyl di-2-propenoate | Cat Ex 25.32(i) | Cat Ex Memo |
| 713 | 2,6-Naphthalenedicarboxamide, N,N'-dicyclohexyl- | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 715 | Amines, tallow alkyl, ethoxylated | EA (in PDF,* 291 kB) | FONSI |
| 716 | Titanium nitride | EA (in PDF,* 3.23 MB) |
FONSI/EA Supplement |
| 717 | Formaldehyde polymer with 1-naphthalenol | EA (in PDF,* 446 kB) | FONSI/EA Supplement |
| The EA and FONSI for the food additive poly(1-hydroxynaphthylmethane) in Food Additive Petition (FAP) 3B4380 were used to support the environmental decision for FCN 717. | EA (in PDF,* 785 kB) | FONSI | |
| 719 | Pentaerythritol tetra(3-dodecylthiopropionate) | Cat Ex 25.32(i) | Cat Ex Memo |
| 720 | Benzene, ethenyl-, polymer with 1,3-butadiene, hydrogenated, 4-methyl-1,3,2-dioxaborinan-2-yl 4-methyl-1,3,2-dioxaborolan-2-yl derivatives | Cat Ex 25.32(i) | Cat Ex Memo |
| 721 | 1,3-Benzenedicarboxylic acid, polymer with 1,3-benzenedimethanamine and hexanedioic acid | EA (in PDF,* 818 kB) | FONSI/EA Supplement |
| 722 | Vinylidene chloride/vinyl chloride/methyl acrylate copolymer | EA (in PDF,* 396 kB) | FONSI |
| 724 | An equilibrium mixture of peroxyacetic acid, hydrogen peroxide, acetic acid, and 1-hydroxyethylidene-diphosphonic acid (HEDP) | Cat Ex 25.32(q) | Cat Ex Memo |
| 725 | (1,1'-Biphenyl)-4,4'-diol, polymer with 1,1'-sulfonylbis(4-chlorobenzene), alternatively named poly(oxy[1,1'-biphenyl]-4,4'-dihydroxy-1,4-phenylenesulfonyl-1,4-phenylene) | EA (in PDF,* 284 kB) | FONSI/EA Supplement |
| 726 | Poly(oxy-p-phenylenesulfonyl-p-phenylene) | EA (in PDF,*) 270 kB | FONSI/EA Supplement |
| 727 | 1,4-Benzenedicarboxylic acid compound with 1,6-hexanediamine (1:1), polymer with hexahydro-2H-azepin-2-one [Nylon 6/6T] | Cat Ex 25.32(j) | Cat Ex Memo |
| 728 | Peroxyacetic acid, hydrogen peroxide, and 1-hydroxyethylidene-1,1-diphosphonic acid | EA (in PDF,* 482 kB) | FONSI/EA Supplement |
| 729 | Polymer of dimethyl terephthalate, 1,4-cyclohexanedimethanol, and 2,2,4,4-tetramethyl- 1,3-cyclobutanediol containing 2,2,4,4-tetramethyl- 1,3-cyclobutanediol at up to 40 mole percent (expressed as mole % of the glycol component of the finished copolyesters) and 1,4-cyclohexanedimethanol at no less than 60 mole percent | Cat Ex 25.32(j) | Cat Ex Memo |
| 730 | Ammonium bromide solution, 35% | Cat Ex 25.32(q) | Cat Ex Memo |
| 731 | Hexanedioic acid, polymer with hexahydro-2H-azepin-2-one and 1,6-hexanediamine [Nylon 6/66] | EA (in PDF*) | FONSI/EA Supplement |
| 732 | Polyalkyl (C12 - C17) methacrylate polymer or copolymer with alkyl (C18 - C22) methacrylate monomers | EA (in PDF,* 347 kB) | FONSI |
| 733 | Polyester-polyurethane composition | EA (in PDF,* 336 kB) | FONSI/EA Supplement |
| 734 | 1-Naphthalenamine, N-phenyl-ar-(1,1,3,3-tetramethylbutyl)-(para isomer) | Cat Ex 25.32(j) | Cat Ex Memo |
| 735 | A thermoplastic polyurethane formulated from 1,6-hexanediolpolycarbonate, 4,4'-diphenylmethane diisocyanate, and 2,2'-p-phenylenedioxydiethanol | Cat Ex 25.32(j) | Cat Ex Memo |
| 736 | 1-Propene, 1,1,2,3,3,3-hexafluoro-, polymer with 1,1-difluoroethene modified with a halogenated ethylene | Cat Ex 25.32(i) | Cat Ex Memo |
| 737 | Poly[bis(isoindol-2-yl-1,3-dione)-1,3-phenylene-4,4'-(1-methylethylidene) bisphenol] | EA (in PDF,* 353 kB) | FONSI |
| 739 | An aqueous solution of sodium chlorite and chlorine dioxide | EA (in PDF,* 897 kB) | FONSI/EA Supplement |
| 740 | Acrylate copolymers containing 2-propenoic acid, 4-(((4-benzoylphenoxy)carbonyl)oxy)butyl ester along with 2-propenoic acid, n-butyl-2-propenoate, 2-ethylhexyl 2-propenoate, methyl 2-propenoate, and/or 2-methyl-2-propenoic acid methyl ester | EA (in PDF,* 295 kB) | FONSI |
| 741 | Ethylene/hexene copolymers containing up to 25 weight-percent polymer units derived from hexene | EA (in PDF*) | FONSI |
| 742 | Copolymers produced by polymerization of 6-hydroxy-2-naphthoic acid with one or more of the following monomers: 4-hydroxybenzoic acid; 4,4'-biphenol; N-(4-hydroxyphenyl)acetamide; terephthalic acid; resorcinol; and isophthalic acid | EA (in PDF,* 404 kB) | FONSI |
| 743 | Mixture of saturated linear aliphatic esters produced from C12 - C18 alcohols and C12 - C18 fatty acids | Cat Ex 25.32(i) | Cat Ex Memo |
| 744 | 1,4-Benzenedicarboxylic acid, 1,4-dibutyl ester | EA (in PDF,* 281 kB) | FONSI |
| 745 | 1,4-Benzenedicarboxylic acid, dimethyl ester, polymer with 1,3-propanediol or 1,4-benzenedicarboxylic acid, polymer with 1,3-propanediol | EA (in PDF,* 325 kB) | FONSI |
| 746 | 2-Propen-1-ol, reaction products with 1,1,1,2,2,3,3,4,4,5,5,6,6-tridecafluoro-6-iodohexane, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine | Cat Ex 25.32(i) | Cat Ex Memo |
| 748 | 1[H]-Benz[de]isoquinoline-1,3(2H)-dione, 2-[2,6-bis(1-methylethyl)phenyl]-6-[4-(1,1,3,3-tetramethylbutyl)phenoxy] | Cat Ex 25.32(i) | Cat Ex Memo |
| 749 | Acetic acid ethenyl ester, polymer with ethene and 1,1'-(1-ethenyl-1,2-ethanediyl) diacetate, hydrolyzed | EA (in PDF,* 338 kB) | FONSI |
| 750 | Acetylated monoglycerides of hydrogenated castor oil | EA (in PDF,* 522 kB) | FONSI |
| 751 | 2-Propenoic acid, homopolymer, sodium salt | EA (in PDF*) | FONSI/EA Supplement |
| 752 | Formaldehyde, polymer with 1-naphthalenol | EA (in PDF,* 364 kB) | FONSI/EA Supplement |
| 757 | Hydrogenated olefin polymers (polyalphaolefins) prepared from one or more of the following monomers: 1-hexene, 1-octene, 1-decene, 1-dodecene, and 1-tetradecene | EA (in PDF,* 363 kB) | FONSI |
| 758 | 1-Dodecene, reaction products with naphthalene | Cat Ex 25.32(j) | Cat Ex Memo |
| 759 | C16 - C18 Fatty acid esters of a branched C20 alcohol | Cat Ex 25.32(j) | Cat Ex Memo |
| 762 | Boron nitride | Cat Ex 25.32(j) | Cat Ex Memo |
| 765 | Solid solution of perylene derivatives | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 766 | Polyester-urethane composition comprising (1) a base material component of polyester-urethanediol resins described in 21 CFR 177.1390(c)(2)(iv)(a), which may be prepared with 2,2-bis(hydroxymethyl) butanoic acid, as an optional polyhydric alcohol, and with 2,2-dimethyl-1,3-propanediol, as an optional polyhydric alcohol, and (2) a curing agent component of urethane cross-linking agent consisting of 1,3-butanediol reaction products with 1,6-diisocyanatohexane | EA (in PDF,* 917 kB) | FONSI |
| 767 | Tris(2,4-di-tert-butylphenyl)phosphite | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 768 | Octadecyl, 3,5-di-tert-butyl-4-hydroxyhydrocinnamate | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 769 | N,N'-bis(phenylmethyl)-hexanediamide used in conjunction with cobalt neodecanoate | Cat Ex 25.32(i) | Cat Ex Memo |
| 770 | 1,4-Bis(2-ethylhexyl) benzenedicarboxylate | Cat Ex 25.32(j) and EA (in PDF,* 315 kB) |
Cat Ex Memo/ FONSI |
| 771 | 3,6-Di-p-tolyl-2,5-dihydro-pyrrolo[3,4-c]pyrrole-1,4-dione as the principal component in a solid solution of diketopyrrolo-pyroles | Cat Ex 25.32(i) | Cat Ex Memo |
| 772 | Mixture of one or more of tripropylene glycol diacrylate, trimethylolpropane triacrylate, trimethylolpropane ethoxylate triacrylate, and bisphenol A diglycidyl ether diacrylate as monomer(s) and the difunctional alpha-hydroxy ketone, described in the notification, as an optional photoinitiator | Cat Ex 25.32(i), (j), and EA (in PDF,* 393 kB) |
Cat Ex Memo/ FONSI |
| 773 | Zeolite A in which silver and ammonium ions have been exchanged for sodium ions | Cat Ex 25.32(i) | Cat Ex Memo |
| 774 | Copolymer of 1,2-bis(triethoxysilyl)ethane and 3-aminopropyltriethoxysilane | Cat Ex 25.32(i) | Cat Ex Memo |
| 775 | 1,3-Dibromo-5,5-dimethylhydantoin | EA (in PDF,* 1.02 MB) |
FONSI |
| 776 | Formamide, N-ethenyl-, homopolymer, and formamide, N-ethenyl-, copolymer with ethenamine, hydrochloride or sulfate | Cat Ex 25.32(i) | Cat Ex Memo |
| 778 | 2-Propenoic acid, 2-methyl, polymer with alpha-(2-methyl-1-oxo-2-propenyl)-omega-methoxypoly(oxy-1,2-ethanediyl) and 2-propenoic acid, graft, sodium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 780 | 1,4-Benzenedicarboxylic acid, dimethyl ester, polymer with 1,4-butanediol, adipic acid, hexamethylene diisocyanate and not more than 1% by weight of the polyhydric alcohol described in the notification | EA (in PDF,* 387 kB) | FONSI |
| 783 | 2-Propen-1-ol, reaction products with 1,1,1,2,2,3,3,4,4,5,5,6,6-tridecafluoro-6-iodohexane, dehydroiodinated, reaction products with epichlorohydrin and triethylenetetramine | Cat Ex 25.32(i) | Cat Ex Memo |
| 784 | Siloxanes and silicones, 3-[3-(diethylmethylammonio)-2-hydroxypropoxyl]propyl methyl, dimethyl, chlorides | EA (in PDF,* 281 kB) | FONSI |
| 785 | Nylon MXD-6 (also known as hexanedioic acid, polymer with 1,3-benzenedimethanamine) | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 787 | An aqueous solution of an equilibrium mixture of oxychloro species (predominantly chlorite, chlorate, and chlorine dioxide) generated by acidification of an aqueous alkaline solution of oxychloro species (predominantly chlorite and chlorate) followed by dilution with potable water | EA (in PDF*) | FONSI |
| 788 | 2-n-Octyl-4-isothiazolin-3-one | Cat Ex 25.32(q) | Cat Ex Memo |
| 790 | Sulfonic acids, C10-18-alkane, sodium salts | Cat Ex 25.32(i) | Cat Ex Memo |
| 792 | 1,3-Dibromo-5,5-dimethylhydantoin | EA (in PDF,* 860 kB) | FONSI |
| 793 | 1,5-Pentanedicarboxylic acid, calcium salt | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 794 | Industrial starch modified by treatment with greater than 5 percent and not more than 21 percent by weight 2,3-epoxypropyltrimethylammonium chloride | Cat Ex 25.32(i) | Cat Ex Memo |
| 798 | 12H-Phthaloperin-12-one, 8,9,10,11-tetrachloro- | Cat Ex 25.32(i) | Cat Ex Memo |
| 799 | [S,S]-Ethylenediaminedisuccinic acid, trisodium salt | EA (in PDF,* 387 kB) | FONSI |
| 800 | Formamide, N-ethenyl-, homopolymer, hydrolyzed, N-(3-carboxy-1-oxopropyl) N-[2-hydroxy-3-(trimethylammonio)-propyl] derivatives, chlorides | Cat Ex 25.32(i) | Cat Ex Memo |
| 801 | Peroxyacetic acid solution containing 1-hydroxyethylidene-1,1-diphosphonic acid | EA (in PDF,* 684 kB) | FONSI |
| 802 | Benzoic acid, 2-hydroxy-, monosodium salt | EA (in PDF,* 538 kB) | FONSI |
| 804 | 1,3-Propanediol, 2-ethyl-2-(hydroxymethyl) | Cat Ex 25.32(i) | Cat Ex Memo |
| 805 | Carboxylic acids, C5-9, hexaesters with dipentaerythritol | Cat Ex 25.32(j) | Cat Ex Memo |
| 806 | Ethylene/1-butene copolymer | Cat Ex 25.32(j) and EA (in PDF,* 436 kB) |
Cat Ex Memo/ FONSI |
| 807 | Mixture of sodium chlorite and sodium chloride | EA (in PDF*) | FONSI |
| 808 | D-Glucitol, bis-O-[(4-methylphenyl)methylene)- | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 810 | 2-Bromo-2-nitro-1,3-propanediol | Cat Ex 25.32(q) | Cat Ex Memo |
| 812 | Acetylated monoglycerides of hydrogenated castor oil | Cat Ex 25.32(i) | Cat Ex Memo |
| 813 | Urea, N,N"-1,3-propanediylbis[N'-octadecyl-] | Cat Ex 25.32(i) | Cat Ex Memo |
| 814 | Tris(2,4-di-tert-butylphenyl)phosphite | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 815 | β-Alanine, N-(2-aminoethyl)-, monosodium salt, polymer with 1,4-butanediol, 1,6-diisocyanatohexane, 1,3-diisocyanatomethylbenzene and hexanedioic acid | EA (in PDF,* 412 kB) | FONSI |
| 816 | Carbamodithioic acid, dibutyl-, methylene ester | Cat Ex 25.32(j) | Cat Ex Memo |
| 817 | Hexanedioic acid, polymer with 1,3-benzenedimethanamine | Cat Ex 25.32(i) | Cat Ex Memo |
| 818 | Titanium nitride | EA (in PDF,* 297 kB) | FONSI |
| 820 | Copolymer of perfluorohexylethyl acrylate and polyethylene glycol monoacrylate | Cat Ex 25.32(i) | Cat Ex Memo |
| 821 | Styrene block polymer with 1,3-butadiene, hydrogenated | EA (in PDF,* 300 kB) | FONSI |
| 822 | 1-Tetradecene reaction products with naphthalene | Cat Ex 25.32(j) | Cat Ex Memo |
| 823 | Chromium nitride | Cat Ex 25.32(j) | Cat Ex Memo |
| 824 | N-[3,5-Bis-(2,2-dimethyl-propionylamino)-phenyl]-2,2-dimethyl-propionamide | Cat Ex 25.32(i) | Cat Ex Memo |
| 825 | Nonitol, 1,2,3-trideoxy-4,6:5,7-bis-O-[(4-propylphenyl)methylene]- | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 826 | Siloxanes and silicones, di-methyl, methyl vinyl, hydroxy-terminated, reaction products with trimethoxy[3-(oxiranylmethoxy)propyl]silane | Cat Ex 25.32(i) | Cat Ex Memo |
| 827 | 2-Propenoic acid, 2-hydroxyethyl ester, polymer with α-(1-oxo-2-propen-1-yl)-ω-hydroxypoly(oxy-1,2-ethanediyl), α-(1-oxo-2-propen-1-yl)-ω-[(1-oxo-2-propen-1-yl)oxy]poly(oxy-1,2-ethanediyl) and 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl 2-propenoate | Cat Ex 25.32(i) | Cat Ex Memo |
| 828 | 1,3:2,4-di-O-(p-Chlorobenzylidene)-D-sorbitol | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 829 | Tris(2,4-di-tert-butylphenyl)phosphite | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 830 | Octadecyl 3,5-di-tert-butyl-4-hydroxyhydrocinnamate | Cat Ex 25.32(i) and (j) | Cat Ex Memo |
| 831 | Poly(tetramethylene terephthalate) | Cat Ex 25.32(j) | Cat Ex Memo |
| 832 | Propylene-ethylene copolymers | EA (in PDF*) | FONSI |
| 834 | 1,4-Butanediol dimethacrylate | EA (in PDF,* 326 kB) | FONSI |
| 836 | Polycyclooctene | Cat Ex 25.32(i) | Cat Ex Memo |
| 837 | Benzenesulfonic acid, 2,2'-(1,2-ethenediyl) bis(5-(4-(bis(2-hydroxyethyl)amino)-6-((4-sulfophenyl)amino)-1,3,5-triazin-2-yl)amino)-, tetrasodium salt | Cat Ex 25.32(i) | Cat Ex Memo |
| 839 | Dodecanoic acid, 12-amino-, polymer with ethene, 2,5-furandione, α-hydro-ω-hydroxypoly (oxy-1,2-ethanediyl) and 1-propene | EA (in PDF*) | FONSI |
*PDF Readers are available for free from the Adobe Acrobat web site.
