Patents > Search Collections > MPEP > 609.05(a) Noncomplying Information Disclosure Statements [R-7] - 600 Parts, Form, and Content of Application

Go to MPEP - Table of Contents

browse before

609.05(a) Noncomplying Information Disclosure Statements [R-7] - 600 Parts, Form, and Content of Application

609.05(a) Noncomplying Information Disclosure Statements [R-7]

Pursuant to 37 CFR 1.97(i), submitted information, filed before the grant of a patent, which does not comply with 37 CFR 1.97 and 37 CFR 1.98 will be placed in the file, but will not be considered by the Office. Information submitted after the grant of a patent must comply with 37 CFR 1.501.

If an information disclosure statement does not comply with the requirements based on the time of filing of the IDS as discussed in MPEP § 609.04(b), including the requirements for fees and/or statement under 37 CFR 1.97(e), the IDS will be placed in the application file, but none of the information will be considered by the examiner. The examiner may use form paragraph 6.49 which is reproduced below to inform applicant that the information has not been considered. Applicant may then file a new information disclosure statement or correct the deficiency in the previously filed IDS, but the date that the new IDS or correction is filed will be the date of the IDS for purposes of determining compliance with the requirements based on the time of filing of the IDS ( 37 CFR 1.97).

The examiner should write "not considered" on an information disclosure statement where none of the information listed complies with the requirements, e.g., the format requirements of 37 CFR 1.98(a)(1) are not met. For Image File Wrapper (IFW) processing, see IFW Manual. If none of the information listed on a PTO/SB/08A and 08B form is considered, a diagonal line should also be drawn in pencil across the form and the form placed on the right side of the application file >(if the application is maintained in paper)< to instruct the printer not to list the information on the face of the patent if the application goes to issue. The paper containing the disclosure statement or list will be placed in the record in the application file. The examiner will inform applicant that the information has not been considered and the reasons why by using form paragraphs 6.49 through 6.49.09. If the improper citation appears as part of another paper, e.g., an amendment, which may be properly entered and considered, the portion of the paper which is proper for consideration will be considered.

If an item of information in an IDS fails to comply with all the requirements of 37 CFR 1.97 and 37 CFR 1.98, that item of information in the IDS will not be considered and a line should be drawn through the citation to show that it has not been considered. However, other items of information that do comply with all the requirements of 37 CFR 1.97 and 37 CFR 1.98 will be considered by the examiner.

If information listed in the specification rather than in a separate paper, or if the other content requirements as discussed in MPEP § 609.04(a) are not complied with, the information need not be considered by the examiner, in which case, the examiner should notify applicant in the next Office action that the information has not been considered.

FORM PARAGRAPHS

¶ 6.49 Information Disclosure Statement Not Considered

The information disclosure statement filed [1] fails to comply with the provisions of 37 CFR 1.97, 1.98 and MPEP § 609 because [2]. It has been placed in the application file, but the information referred to therein has not been considered as to the merits. Applicant is advised that the date of any resubmission of any item of information contained in this information disclosure statement or the submission of any missing element(s) will be the date of submission for purposes of determining compliance with the requirements based on the time of filing the statement, including all requirements for statements under 37 CFR 1.97(e). See MPEP § 609.05(a).

Examiner Note:

See MPEP § 609.05(a) for situations where the use of this form paragraph would be appropriate.

¶ 6.49.01 Information Disclosure Statement Not Considered, After First Action, But Before the Prosecution of the Application Closes, No Statement

The information disclosure statement filed [1] fails to comply with 37 CFR 1.97(c) because it lacks a statement as specified in 37 CFR 1.97(e). It has been placed in the application file, but the information referred to therein has not been considered.

¶ 6.49.02 Information Disclosure Statement Not Considered, After First Action, But Before the Prosecution of the Application Closes, No Fee

The information disclosure statement filed [1] fails to comply with 37 CFR 1.97(c) because it lacks the fee set forth in 37 CFR 1.17(p). It has been placed in the application file, but the information referred to therein has not been considered.

¶ 6.49.03 Information Disclosure Statement Not Considered, After the Prosecution of the Application Closes, Issue Fee Not Paid, No Statement

The information disclosure statement filed [1] fails to comply with 37 CFR 1.97(d) because it lacks a statement as specified in 37 CFR 1.97(e). It has been placed in the application file, but the information referred to therein has not been considered.

¶ 6.49.05 Information Disclosure Statement Not Considered, After the Prosecution of the Application Closes, Issue Fee Not Paid, No Fee

The information disclosure statement filed [1] fails to comply with 37 CFR 1.97(d) because it lacks the fee set forth in 37 CFR 1.17(p). It has been placed in the application file, but the information referred to therein has not been considered.

¶ 6.49.06 Information Disclosure Statement Not Considered, References Listed in Specification

The listing of references in the specification is not a proper information disclosure statement. 37 CFR 1.98(b) requires a list of all patents, publications, applications, or other information submitted for consideration by the Office, and MPEP § 609.04(a), subsection I. states, "the list may not be incorporated into the specification but must be submitted in a separate paper." Therefore, unless the references have been cited by the examiner on form PTO-892, they have not been considered.

¶ 6.49.07 Information Disclosure Statement Not Considered, No Copy of References

The information disclosure statement filed [1] fails to comply with 37 CFR 1.98(a)(2), which requires a legible copy of each cited foreign patent document; each non-patent literature publication or that portion which caused it to be listed; and all other information or that portion which caused it to be listed. It has been placed in the application file, but the information referred to therein has not been considered.

Examiner Note:

Do not use this form paragraph when the missing reference(s) are U.S. patents, U.S. patent application publications, or U.S. pending applications (limited to the specification, including claims, and drawings) stored in IFW.

¶ 6.49.08 Information Disclosure Statement Not Considered, Non-Compliant List of References

The information disclosure statement filed [1] fails to comply with 37 CFR 1.98(a)(1), which requires the following: (1) a list of all patents, publications, applications, or other information submitted for consideration by the Office; (2) U.S. patents and U.S. patent application publications listed in a section separately from citations of other documents; (3) the application number of the application in which the information disclosure statement is being submitted on each page of the list; (4) a column that provides a blank space next to each document to be considered, for the examiner's initials; and (5) a heading that clearly indicates that the list is an information disclosure statement. The information disclosure statement has been placed in the application file, but the information referred to therein has not been considered.

Examiner Note:

If an IDS listing includes a copy of an initialed IDS listing from another application, the IDS listing would not comply with the requirements under 37 CFR 1.98(a)(1). This form paragraph is applicable for such an IDS submission.

¶ 6.49.09 Information Disclosure Statement Not Considered, No Explanation of Relevance of Non-English Language Information

The information disclosure statement filed [1] fails to comply with 37 CFR 1.98(a)(3)(i) because it does not include a concise explanation of the relevance, as it is presently understood by the individual designated in 37 CFR 1.56(c) most knowledgeable about the content of the information, of each reference listed that is not in the English language. It has been placed in the application file, but the information referred to therein has not been considered.

**> ¶ 6.49.10 Information Disclosure Statement Not Considered, Non-acceptable Electronic Medium

The information disclosure statement filed [1] was submitted on an electronic medium that was not acceptable. It has been placed in the application file, but the information referred to therein has not been considered. Note that U.S. patents, U.S. application publications, foreign patent documents and non-patent literature cited in an information disclosure statement may be electronically submitted in compliance with the Office Electronic Filing System (EFS) requirements.

Examiner Note:

This form paragraph may be used when the IDS that includes patents and non-patent literature documents is submitted on compact discs or any other electronic medium, except via EFS. Only tables, sequence listings, and program listings may be submitted on CDs. See 37 CFR 1.52(a) and (e).

< ¶ 6.51 Time for Completing Information Disclosure Statement

The information disclosure statement filed on [1] does not fully comply with the requirements of 37 CFR 1.98(b) because: [2]. Since the submission appears to be bona fide, applicant is given ONE (1) MONTH from the date of this notice to supply the above-mentioned omissions or corrections in the information disclosure statement. NO EXTENSION OF THIS TIME LIMIT MAY BE GRANTED UNDER EITHER 37 CFR 1.136(a) OR (b). Failure to timely comply with this notice will result in the above-mentioned information disclosure statement being placed in the application file with the non-complying information not being considered. See 37 CFR 1.97(i).

Examiner Note:

Use this form paragraph if an IDS complies with the timing requirements of 37 CFR 1.97 but part of the content requirements of 37 CFR 1.98(b) has been inadvertently omitted.

This practice does not apply where there has been a deliberate omission of some necessary part of an Information Disclosure Statement or where the requirements based on the time of filing the statement, as set forth in 37 CFR 1.97, have not been complied with.

browse after

KEY: =online business system =fees =forms=help =laws/regulations =definition (glossary) The Inventors Assistance Center is available to help you on patent matters.Send questions about USPTO programs and services to the USPTO Contact Center (UCC). You can suggest USPTO webpages or material you would like featured on this section by E-mail to the webmaster@uspto.gov. While we cannot promise to accommodate all requests, your suggestions will be considered and may lead to other improvements on the website.

Go to MPEP - Table of Contents