 |
Electrical |
|
| Possible Solutions |
|
|
|
 |
Quick Link |
 |
|
|
A variety of possible solutions
may be implemented to reduce or eliminate the risk of injury associated with
electrical work. Examples of solutions include the use of insulation, guarding,
grounding, electrical protective devices, and safe work practices. The following
references aid in controlling electrical hazards in the workplace.
- Controlling Electrical Hazards. OSHA Publication 3075, (2002).
Also available as a 350 KB PDF,
66 pages. Provides a basic overview of electrical safety on the job, including information on how electricity works, how to protect against
electricity, and how OSHA can help.
- Lockout-Tagout
Interactive Training Program. OSHA. Provides an
interactive decision making tool designed to expand the user's knowledge of
lockout/tagout.
- Control
of Hazardous Energy (Lockout/Tagout). OSHA Safety and Health Topics Page. Provides links to information that may involve electrical
hazards in the workplace.
-
Ergonomic Survival Guide for Electricians. Cal/OSHA Consultation
Service. Also available as a 850 KB
PDF, 5 pages and as a 763 KB
PDF (Spanish version). Promotes awareness of safe work practices for electricians.
-
Electrical Safety: Safety and Health for Electrical Trades Student Manual. US Department of Health and Human Services (DHHS), National Institute for Occupational Safety and Health (NIOSH) Publication No. 2002-123, (2002, January).
Also available as a 2 MB
PDF,
80 pages. As part of a safety and health curriculum for secondary and
post-secondary electrical trades courses, this manual is
designed to engage the learner in recognizing, evaluating, and controlling hazards associated with electrical work.
- Alerts. US Department of Health and Human Services (DHHS), National Institute for Occupational Safety and Health (NIOSH). Presents information about occupational illnesses, injuries, and deaths. Requests assistance in preventing, solving, and controlling newly identified occupational hazards. The following alerts are associated with electrical
injuries:
- Preventing Worker
Deaths from Uncontrolled Release of Electrical, Mechanical, and Other Types of Hazardous
Energy. Publication No. 99-110, (1999, August).
- Preventing Deaths and Injuries of Adolescent Workers. Publication No. 95-125, (1995, May). Summarizes
available information about work-related injuries among adolescents, identifies work that is especially hazardous, and offers recommendations for prevention.
- Preventing Falls and Electrocutions During Tree Trimming. Publication No. 92-106, (1992, August). Describes
eight incidents involving five electrocutions and three fatal falls of tree trimmers.
- Preventing Electrocutions by Undetected Feedback Electrical Energy
Present in Power Lines. Publication No. 88-104, (1987, December).
- Preventing Fatalities of Workers Who Contact Electrical Energy. Publication No. 87-103, (1986, December). Explains
that prompt emergency medical care can be lifesaving for workers who have contacted either low voltage or high voltage electric energy. Immediate cardiopulmonary resuscitation (CPR) followed by advanced cardiac life support (ACLS) has been shown to save lives.
- Preventing Electrocutions Due to Damaged Receptacles and Connectors. Publication No. 87-100, (1986, October).
- Preventing Grain Auger Electrocutions. Publication No. 86-119, (1986, July). Explains that moving grain augers in their elevated position may
result in electrocution if they contact overhead power lines while being moved.
- Preventing Electrocutions of Workers in Fast Food Restaurants. Publication No. 85-104, (1984, December). Describes an
electrocution death and gives solutions to avoid similar situations.
|
|
|
|
Back to Top
