Web sites for both the 2008 Report on the Environment and the Highlights Document, as well as the hard copy versions of the reports, can be accessed at www.epa.gov/roe.
Written for a general audience, this document, EPA's 2008 Report on the Environment: Highlights of National Trends, summarizes some important findings from a more comprehensive companion report, EPA's 2008 Report on the Environment. An electronic version of the report, available at www.epa.gov/roe, facilitates navigation and searching across both documents.
Highlights of National Trends is organized around five chapters. Three of the chapters (Air, Water, and Land) focus on trends in these environmental media. The other two chapters address trends in human health and ecological condition more broadly.
The chapters are divided into 25 topic pages. Each page summarizes what we know - and don't know - about conditions and trends for the topic. The information on these topics comes from highly reliable indicators (see box below) and is based on the most recent data available from a variety of governmental and nongovernmental organizations.
Highlights of National Trends features a subset of indicators from the more comprehensive Report on the Environment. The indicators were selected for inclusion based on their importance to the public and to scientists, as well as their ability to answer a series of key questions about the environment. These key questions and 85 associated indicators form the framework of the Report on the Environment and are listed at the end of this document.
In addition, only a few of the most important data gaps and limitations from the Report on the Environment are included in Highlights of National Trends. Readers are encouraged to consult the Report on the Environment and the electronic version for more information. You can also read about some actions that individuals can take to protect the environment and their own health in the electronic version of Highlights of National Trends.
- Rely on actual measurements of environmental and human health conditions over time.
- Meet a set of standards, which include quality, accuracy, relevance, and comparability.
- Were reviewed by an independent scientific panel to ensure that they meet these standards.
- Are national (or in some cases regional) in coverage. They do not describe trends or conditions for a specific locale.
- Come from many governmental and nongovernmental organizations, which collect data at different time periods and for varying purposes.
- Can only partially answer the key questions.
The length of time and geographic area over which consistent data have been gathered varies from one indicator to another. Some indicators cover many years, while others address only one point in time (a baseline for measuring trends in the future). Most indicators in this report present data at the national level, but some regional indicators have been used to illustrate important scenarios and could be applied to the nation in the future.
All of the indicators were reviewed by an independent panel and meet strict definitions and criteria, including scientific quality and national (or in some cases regional) coverage. Other sources of information are not included in this report because they do not meet one or more of the criteria. While no data sources are cited in Highlights of National Trends, sources for all data are available in the larger Report on the Environment document.
Each topic page in Highlights of National Trends acknowledges some of the most important limitations of the indicators presented, or where gaps exist. Data limitations are noted to provide the reader with information about the quality or extent of the data presented that may affect the way in which they are used. Data gaps are noted to identify areas or aspects of the environment in which little or no measurement has been conducted. This report does not propose actions to reduce data limitations or fill gaps.
Since the release of the 2003 report, EPA has revised, updated, and refined the information in the Report on the Environment in response to scientific developments as well as stakeholder feedback. EPA will publish periodic updates of the Report on the Environment and use it to inform the Agency's strategic planning process.
EPA's 2008 Report on the Environment.
Highlights of National Trends is one of three products that collectively make up EPA's 2008 Report on the Environment. The other two products are:- EPA's 2008 Report on the Environment, the source of the information presented in this document. The Report on the Environment is organized around key questions about the environment and presents 85 indicators to help answer those questions.
- A Web-based tool for navigating and searching EPA's 2008 Report on the Environment and EPA's 2008 Report on the Environment: Highlights of National Trends, available at www.epa.gov/roe.
The content of Highlights of National Trends is derived from EPA's 2008 Report
on the Environment, which features detailed information on 85 environmental
indicators. Most of these indicators are national in scope; however, regional
indicators have been used in some cases to illustrate important scenarios and
could be applied to the nation in the future. A subset of these indicators is
presented in this document.
EPA selected indicators to highlight in this document based on their completeness,
importance to the public and the scientific community, ability to show a
meaningful trend, and ability to address a key environmental question.
Indicators developed since EPA's Draft Report on the Environment 2003 were
also given priority.
Environmental Indicators
The indicators used in the Report on the Environment:
- Rely on actual measurements of environmental and human health conditions over time.
- Meet a set of standards, which include quality, accuracy, relevance, and comparability.
- Were reviewed by an independent scientific panel to ensure that they meet these standards.
- Are national (or in some cases regional) in coverage. They do not describe trends or conditions for a specific locale.
- Come from many governmental and nongovernmental organizations, which collect data at different time periods and for varying purposes.
- Can only partially answer the key questions.
Tracking the nation's air quality is challenging because of the many sources, types, and effects of air pollution. Most outdoor air pollutants can be directly traced back to emissions sources that release the pollutants into the air. However, some air pollutants, such as ozone, are formed in the air when an emission reacts with another airborne substance.
Once airborne, pollutants can be transported long distances by wind or transformed into other compounds. They also can fall back to Earth, contaminating water and land. Both the amount of pollutants emitted into the air and how these pollutants move through the atmosphere determine air pollution levels, which are measured as concentrations.
Many indicators are needed to characterize outdoor air quality separate from indoor air quality, to characterize air quality trends at ground level as well as higher in the atmosphere, and to characterize both emissions and concentrations. Also, air quality varies considerably with location and time, which makes it challenging to obtain a representative national picture.
Documents and Links
- Download Highlights Document Air Chapter (PDF) (6 pp, 380kb)
- Download Highlights Document Outdoor Air Topic (PDF) (1 pp, 92kb)
- Technical Document: (Air home)
- Technical Document: (Outdoor Air topic)
All Related Indicators
- Air Toxics Emissions
- Ambient Concentrations of Benzene
- Ambient Concentrations of Carbon Monoxide
- Ambient Concentrations of Lead
- Ambient Concentrations of Nitrogen Dioxide
- Ambient Concentrations of Ozone
- Ambient Concentrations of Particulate Matter
- Carbon Monoxide Emissions
- Lead Emissions
- Mercury Emissions
- Nitrogen Oxides Emissions
- Particulate Matter Emissions
- Sulfur Dioxide Emissions
- Volatile Organic Compounds Emissions
What You Can Do
- All Air topics
- Check daily air quality forecasts
- Use paints, stains, finishes, and paint strippers that are water-based or low in volatile organic compounds.
- On ozone action days, refuel your vehicle after dusk.
- Avoid spilling gasoline, and don't "top off" the tank.
- Avoid burning leaves, trash, and other materials that cause particle pollution when incinerated.
Beginning in the 1970s, EPA developed standards to protect human health and the environment from six common air pollutants that pose serious health and environmental effects: carbon monoxide, lead, nitrogen dioxide, ozone, airborne liquid and solid particles (known as particulate matter), and sulfur dioxide. These pollutants are often referred to as criteria pollutants.
Subsequently, EPA identified an additional 188 pollutants of concern, called air toxics, that are known or suspected to cause cancer, other serious health problems, and adverse environmental effects. Examples include benzene,which is found in gasoline; metals such as mercury and cadmium; dioxin; and asbestos.
There are several ways to measure outdoor air pollution trends. Emissions can be measured or estimated at their source, and concentrations of pollutants in the air can be monitored at numerous outdoor locations around the country.
Key Points
-
-
-
-
National indicators are not available for other aspects of outdoor air quality.
While indicators provide insights on emissions and outdoor air concentration trends for many pollutants, monitoring networks are not yet extensive enough to determine national trends in concentrations for all pollutants, including many air toxics. Further, the indicators are limited in quantifying how exposures to single pollutants and mixtures of air pollutants affect human health and the environment. Although strong evidence links outdoor air pollution to health effects at specific locations, few long-term studies at a national scale have measured the extent to which health effects are linked directly to outdoor air quality.
Documents and Links
- Download Highlights Document Air Chapter (PDF) (6 pp, 380kb)
- Download Highlights Document Acid Rain and Regional Haze Topic (PDF) (1 pp, 200kb)
- Technical Document: (Air home)
All Related Indicators
What You Can Do
Acid deposition is of concern because it can make soils, lakes, and streams more acidic, which can harm fish, amphibians, water birds, and other species in affected areas. It can also damage trees, buildings, monuments, painted surfaces, and other materials. Acid rain can be tracked in several ways: by evaluating emissions of sulfur dioxide and nitrogen oxides (the pollutants that form sulfates and nitrates), by monitoring acid rain directly, and by measuring the acidity of water bodies.
The pollutants that form acid rain also form airborne particulate matter, which contributes to regional haze. Regional haze, tracked by visibility measurements, is caused when sunlight encounters tiny airborne particles that limit the distance one can see. Regional haze also degrades the color, clarity, and contrast of vistas, including those found in many National Parks and Wilderness Areas. Certain substances impair visibility more during humid conditions.
Key Points
-
-
Acid rain, as measured by wet deposition of sulfates and nitrates, decreased across most of the country from 1989 to 2006.
Consistent with emissions data, average regional decreases in wet deposition of sulfate during this time were 35 percent in the Northeast, 33 percent in the Midwest, 28 percent in the Mid-Atlantic, and 20 percent in the Southeast (see graphic). Wet deposition of nitrate also decreased in some parts of the country, but to a lesser extent than wet deposition of sulfate.
Acid Deposition
-
Many surface waters in the Adirondack Mountains, New England, and the northern Appalachian regions became less acidic between the early 1990s and 2005.
This change corresponds to a decrease in acid rain in these regions. While acidic surface waters are still found in these areas, some surface waters are showing signs of recovery. National indicators are not available to track trends in other ways that acid rain has harmed the environment or human health.
Lake and Stream Acidity
-
Regional haze in 38 National Parks and Wilderness Areas improved between 1992 and 2004, with the average annual visual range (or distance that one can see) gradually increasing.
On average, the West has substantially better visibility than the East due to regional differences in air pollution and the greater humidity in the East. National indicators have not been developed to track visibility in cities or other populated areas.
Regional Haze
Documents and Links
- Download Highlights Document Air Chapter (PDF) (6 pp, 380kb)
- Download Highlights Document Ozone Depletion Topic (PDF) (1 pp, 88kb)
- Technical Document: (Air home)
All Related Indicators
What You Can Do
- All Air topics
- Make sure refrigerants from home appliances such as air conditioners, refrigerators, and dehumidifiers are recovered and recycled during servicing.
- If you are replacing home appliances make sure your old ones are properly disposed of
- Because ozone depletion allows more of the sun's ultraviolet radiation to reach the Earth, take steps to protect your exposed skin, and your family's
Certain ozone-depleting substances, which are man-made and emitted at ground level by sources worldwide, have been damaging the ozone layer for many years. Once these chemicals rise from the troposphere into the stratosphere, they directly lead to ozone depletion: a thinning of the ozone layer over some areas of the world.
Ozone-depleting substances include chlorofluorocarbons (CFCs), which were once extensively used as propellants in spray cans and as refrigerants and solvents. Many countries,including the United States, are phasing out the production and use of CFCs and other ozone-depleting substances. Because many of these substances persist in air for a very long time, however, the ozone layer will take years to recover, even after these chemicals are no longer released.
Ground-based measurement networks and instruments on board aircraft, balloons, and satellites are used to monitor both the thickness of the ozone layer and concentrations of ozone-depleting substances in the troposphere and in the stratosphere.
Key Points
-
Stratospheric ozone over North America decreased through the 1980s and early 1900s, but has started to recover.
Before the late 1970's there was little change, beyond natural variations, in the thickness of the ozone layer over North America. Since then, the thickness of the ozone layer decreased, reaching its lowest level in 1993 (see graphic), with no further decline occurring in more recent years. While the ozone layer has begun to recover, ozone levels over North America during 2002 to 2005 were still 3 percent lower, on average, than those observed 20 years earlier.
Ozone Levels over North America
-
Tropospheric concentrations of total ozone-depleting substances have been slowly declining.
Between 1995 and 2006, total ozone-depleting substances in the troposphere have declined 12 percent, and this decline has contributed to the recent recovery in stratospheric ozone levels. The trends for individual ozone-depleting substances vary. Tropospheric concentrations of many ozone-depleting substances have declined since the early 1990s, but concentrations of halons (fire extinguishing agents) and hydrochlorofluorocarbons (HCFCs), a class of chemicals being used to replace CFCs, increased.
Concentrations of Ozone-Depleting Substances
Documents and Links
- Download Highlights Document Air Chapter (PDF) (6 pp, 380kb)
- Download Highlights Document Greenhouse Gases Topic (PDF) (1 pp, 136kb)
- Technical Document: (Air home)
- Technical Document: (Greenhouse Gases topic)
All Related Indicators
What You Can Do
- All Air topics
- Ask your utility company about purchasing clean energy for your home and workplace.
- When replacing windows, install energy-saving models.
- Choose the cleanest, most fuel-efficient vehicle that meets your needs.
- Use EPA's personal emissions calculator to estimate your greenhouse gas emissions and explore ways to lower them.
- Reduce, reuse, and recycle.
Greenhouse gases are important to track because increased concentrations due to human activity cause the atmosphere to retain heat which, in turn, is affecting various aspects of climate, such as temperature, evaporation,and precipitation. Natural phenomena, like volcanic activity and variations in the sun's output, and other human activities, such as land use changes, also affect climate. Human health, agriculture, water resources, forests, wildlife, and coastal areas all can be affected by climate change.
National trends in greenhouse gases are characterized by tracking emissions of these gases from human activities and concentrations of these gases in the air.
Key Points
-
Global atmospheric concentrations of several important greenhouse gases have risen substantially over the past 100 years.
Measurements of gases trapped historically in Antarctic ice confirm that the current global atmospheric concentrations of carbon dioxide (see graphic) and methane are unprecedented over the past 650,000 years, even after accounting for natural fluctuations. Concentrations of nitrous oxide are 18 percent higher than pre-industrial levels; and concentrations of certain synthetic chemicals were essentially zero a few decades ago, but increased rapidly between 1980 and 2006.
Atmospheric Concentrations of Greenhouse Gases
-
Between 1990 and 2005, U.S. greenhouse gas emissions from human activities rose 16 percent; the primary source of these emissions was fossil fuel combustion.
Carbon dioxide, widely reported as the most important greenhouse gas, makes up most of this increase. Energy use, primarily electricity generation and transportation, accounted for approximately 85 percent of the U.S. greenhouse gas emissions in 2005.
U.S. Greenhouse Gas Emissions
-
While trends in U.S. emissions and global atmospheric concentrations of greenhouse gases are based on robust data, gaps remain.
For both emissions and concentrations, trends have been quantified for several of the most important greenhouse gases, but not for every greenhouse gas.
Documents and Links
- Download Highlights Document Air Chapter (PDF) (6 pp, 380kb)
- Download Highlights Document Indoor Air Topic (PDF) (1 pp, 76kb)
- Technical Document: (Air home)
- Technical Document: (Indoor Air topic)
All Related Indicators
What You Can Do
- All Air topics
- Test your home for radon and have it fixed if radon is found at or above EPA's Action Level.
- If you are buying a new home, look for builders who use radon-resistant new construction.
- Pledge not to smoke in your home and car
- Talk to your children's teachers and day care providers about keeping the places where your children spend time free from second-hand smoke and radon.
- If you or someone you know have children in Head Start, work with your Head Start provider through the Care for Their Air campaign
Indoor air quality is important because Americans, on average, spend most of their time indoors. In addition, the indoor concentrations of some pollutants can exceed levels typically found outdoors. Health effects associated with indoor air pollutants include irritation of the eyes, nose, and throat; headaches, dizziness, and fatigue; respiratory diseases; heart disease; and cancer.
National indicators are available for two harmful substances found in indoor air: radon and environmental tobacco smoke. Radon is a naturally occurring radioactive gas found underground. It can seep into buildings through cracks in floors and walls, and is a risk factor for lung cancer. For homes with radon levels above EPA's radon action level, EPA recommends that occupants take action to protect their health—for example, by installing a mitigation system to reduce radon levels.
Environmental tobacco smoke is associated with numerous health effects, including coughing, heart disease, and lung cancer. Children are at particular risk from exposure to environmental tobacco smoke because they are still developing physically.
Key Points
-
Between 1990 and 2006, both the number of homes with radon mitigation systems and the number of homes needing mitigation increased.
Homes with mitigation systems rose from 175,000 to 714,000, and homes needing mitigation increased from 6.4 million to 7.8 million due in part to an increase in housing stock, particularly in areas with the highest radon potential (see graphic). More than 90 percent of the nation's homes with indoor radon levels at or above EPA's action level do not have mitigation systems, though some of these homes have been built with new, radon-resistant construction features to reduce radon exposures.
U.S. Homes Above EPA's Radon Action Level
-
Over the past decade, exposure to environmental tobacco smoke among nonsmokers decreased considerably.
All population groups, regardless of age, sex, or ethnicity, experienced this decrease, which was likely due to behavior changes such as reduced smoking and smoking restrictions in some public places. Exposure to environmental tobacco smoke is measured by blood levels of cotinine, a substance produced in the body when a person is exposed to nicotine. Among non-smokers, children, on average, have more than twice the level of blood cotinine as adults.
Blood Cotinine Level
-
National indicators currently are not available for a broader range of pollutants and substances found in indoor air.
Scientists have studied numerous other indoor air quality issues, but the available information does not track trends over time or across the entire nation.
The ability of water resources to support these functions depends on their extent and condition. The extent of a water resource refers to its depth, flow, volume, and area. Condition reflects the ability of a water resource to sustain ecological needs and human uses. The extent and condition of water resources can affect the health and wellbeing of people, ecosystems, and critical environmental processes.
In addition, because water is constantly cycling above and below the surface of the Earth, there are many connections between water resources and other parts of the environment. For example, fertilizers and pesticides used on land can leach into underground or surface water supplies. Also, chemicals released into the air can be deposited, via rain or snow, into a lake or stream.
A variety of methods are used to collect data on water resources, including targeted monitoring of specific water resources and select sampling of locations deemed to be representative of a larger area. One of the challenges in assessing the extent and condition of water resources is that a single data collection method is rarely perfect for every situation. This chapter provides an overview of national-level trends where nationally consistent data are available, but it does not describe the extent or condition of local water bodies or the full range of variations and extremes that occur within individual water bodies.
Documents and Links
- Download Highlights Document Water Chapter (PDF) (8 pp, 392kb)
- Download Highlights Document Fresh Surface Waters Topic (PDF) (1 pp, 76kb)
- Technical Document: (Water home)
- Technical Document: (Fresh Surface Waters topic)
All Related Indicators
What You Can Do
- All Water topics
- Keep litter, leaves, and debris out of street gutters and storm drains
- Pick up pet waste and dispose of it properly
- Consider purchasing household detergents and cleaners that are low in phosphorous
- Organize a storm drain marking project
- Volunteer to monitor streams and lakes in your community.
A variety of biological, physical, and chemical characteristics are used to assess the condition of fresh surface waters. An important biological characteristic is the presence and diversity of bottom-dwelling (benthic) macroinvertebrate communities, such as insect larvae, mollusks, and worms. Some species of macroinvertebrates are more sensitive than others to disturbances in their habitat, such as pollution.
Examples of physical characteristics are depth and flow. Major changes in stream flows can affect plant and animal species that have adapted to particular seasonal fluctuations in flow, such as those that require a period of low or no stream flow in their habitat at a certain time of year.
Key chemical characteristics include acidity and dissolved oxygen. Acidity in soils, lakes, and streams can harm aquatic species and ecosystems. Low dissolved oxygen content can also be harmful. Excess concentrations of the nutrients nitrogen and phosphorus (from sewage or agricultural runoff, for instance) can cause algae to bloom in water. As the algae die and decompose, they deplete the oxygen in the water needed by fish and other organisms.
Key Points
-
In about 42 percent of wadeable stream miles, benthic macroinvertebrate communities show substantial disturbance; about 28 percent show little disturbance (see graphic).
Low biological diversity potentially indicates substantial pollution and higher disturbance. By contrast, communities that are biologically diverse and include many pollution-sensitive species likely indicate that a stream is less disturbed. Wadeable streams are streams and rivers shallow enough to sample without boats.
Benthic Macroinvertebrates in Wadeable Streams
-
Since 1960, more than half of the rivers and streams measured nationwide have shown major changes in the volume of high and low flows over time.
In largely arid grasslands and shrublands, the percentage of streams with no-flow periods decreased slightly between 1960 and 2006, along with the average length of no-flow periods.
High and Low Stream Flows
-
-
The extent of surface waters and many key stressors are not currently tracked by national indicators.
Key stressors include pollution from various sources and toxic contaminants in sediments, which can impact water quality and potentially enter the aquatic food web.
Documents and Links
- Download Highlights Document Water Chapter (PDF) (8 pp, 392kb)
- Download Highlights Document Ground Water Topic (PDF) (1 pp, 80kb)
- Technical Document: (Water home)
- Technical Document: (Ground Water topic)
All Related Indicators
What You Can Do
Some ecological systems also depend on ground water. For example, many fish species depend on spring-fed waters for their habitat or spawning grounds. Springs occur when a body of ground water reaches the Earth's surface. By some estimates, ground water feeds about 40 percent of total national stream flow, and the percentage could be much higher in arid areas.
Human activities and natural factors can affect both the extent and condition of ground water. Pesticides, fertilizers, and wastes, as well as natural substances like arsenic, can contaminate ground water. For example, fertilizers and animal wastes used on land can release nutrients such as nitrate, which can seep into ground water.
Withdrawing too much ground water from a source can reduce the water depth in streams and lakes, affecting vegetation and wildlife habitat. It can also cause land to subside and sinkholes to form. Once depleted, some deep aquifers (underground geological formations containing water) can take thousands of years to recharge, affecting the supply of ground water available for future needs.
Key Points
-
About 60 percent of shallow wells tested in agricultural areas contained pesticide compounds.
Approximately 1 percent of the shallow wells tested had concentrations of pesticides above levels considered safe for human health.
Nitrate and Pesticides in Shallow Ground Water in Agricultural Watersheds
-
In about 21 percent of shallow wells, average nitrate concentrations exceeded the federal drinking water standard and were much higher than the levels generally found in areas with little human influence (see graphic).
Public water systems must test for nitrate and treat the water if levels exceed federal health-based standards.
Nitrate and Pesticides in Shallow Ground Water in Agricultural Watersheds
-
The data in this report do not provide information about the condition of deeper aquifers, which are more likely to be used for public water supplies.
These data only characterize the uppermost layers of shallow aquifers typically used by private wells. There are no national treatment or monitoring requirements for private wells; however, owners should test their water periodically to identify possible health risks.
-
There are no consistent national indicators for many aspects of ground water condition or extent.
These aspects include the presence of chemicals other than nitrates and pesticides in agricultural areas and the condition of ground water in predominantly non-agricultural areas, including urban areas. Localized events, such as chemical spills or leaks from underground storage tanks, can affect ground water in urban areas; such events are difficult to measure at the national level.
Documents and Links
- Download Highlights Document Water Chapter (PDF) (8 pp, 392kb)
- Download Highlights Document Wetlands Topic (PDF) (1 pp, 92kb)
- Technical Document: (Water home)
- Technical Document: (Wetlands topic)
All Related Indicators
What You Can Do
- All Water topics
- Encourage neighbors, developers, and state and local governments to protect the quality of wetlands in your area.
- Support public agencies working on wetlands restoration efforts.
- Support private organizations working on wetlands restoration efforts.
- Plant native vegetation in your yard and limit your use of fertilizers and pesticides.
- If you are a landowner, conserve and restore wetlands on your property.
- Participate in American Wetlands Month
Both losses and gains can occur in wetland extent. Natural forces and human activities (such as hurricanes, sea level change, and certain agricultural and forestry practices) can affect wetlands through increased erosion and sedimentation. Draining or filling wetlands for agriculture or other development is the main cause of wetland loss. Gains can occur when wetlands are created or restored.
Changes in the extent or type of wetlands can have major ecological impacts. For example, the conversion of a forested wetland to shrub vegetation can change habitat types and alter the structure of plant and animal communities present. Such a conversion can occur through natural changes in plant communities or by clearing trees from a forested wetland.
Key Points
-
The overall extent of wetlands in the lower 48 states declined over the past 50 years.
The rate of loss has slowed over time, however, and the most recent data show a net gain in wetlands acreage nationwide (see graphic). Gains and losses vary by wetland type. Freshwater ponds account for most of the recent gains in wetland acreage. These ponds do not perform the same range and type of environmental functions as other types of wetlands that have been lost.
Wetland Extent, Change, and Sources of Change
-
These data do not evaluate wetland quality or condition.
Wetland condition is difficult to characterize fully, and there is no national indicator to measure it directly. This is partly because each wetland has unique characteristics, such as the movement and abundance of water, the minerals in the underlying soil, and the combinations of plant and animal species present.
-
National data do not capture locations or patterns of wetland change.
Both are important for understanding condition-for example, whether large wetlands are being left intact or are being fragmented into smaller pieces that are less connected and, therefore, less able to perform their ecological functions.
Documents and Links
- Download Highlights Document Water Chapter (PDF) (8 pp, 392kb)
- Download Highlights Document Coastal Waters Topic (PDF) (1 pp, 84kb)
- Technical Document: (Water home)
- Technical Document: (Coastal Waters topic)
All Related Indicators
What You Can Do
- All Water topics
- Reduce marine debris by disposing of trash properly.
- Know what type of marine sanitation device is installed on your boat.
- Join local beach clean ups
- At home, conserve water, keep septic systems properly maintained, and use natural substances like compost to fertilize gardens
- Find out about current and historical closings, advisories, and other information for beaches you want to visit.
Human activities and natural factors can affect the condition of coastal waters. Sewage overflow, agricultural runoff, storms, erosion, and sedimentation can all increase the amount of nutrients (such as nitrogen and phosphorus) and pathogens (disease-causing organisms) in coastal waters. Chemical contamination from industrial activities, electricity generation, and other sources are also concerns, as are invasive species and overharvesting of fish and other marine species.
Organisms that live in and on the ocean floor (benthic organisms) are a key measure of coastal water condition because these organisms are sensitive to pollution. One important group of benthic organisms, known as benthic macroinvertebrates, includes worms, clams, crabs, and lobsters.
Scientists monitor several interlinked characteristics of water quality in coastal areas: nutrients, chlorophyll-a, dissolved oxygen, and water clarity. Plants need nutrients to grow, but in excess, nutrients fuel the growth of algae. High levels of chlorophyll-a indicate overproduction of algae. Too much algae leads to low levels of dissolved oxygen in the water and decreased water clarity. The resulting lack of oxygen and sunlight can harm plant and animal life.
Scientists also monitor plants that grow under water in coastal areas, known as submerged aquatic vegetation (SAV). Like all plants, SAV needs sunlight to grow and survive. Its growth can be affected by excess nutrients, as well as suspended sediments (loose particles of clay and silt in the water), which can block sunlight from reaching the plants.
Key Points
-
Coastal benthic communities in 70 percent of the areas sampled showed little evidence of disturbance (see graphic).
The benthic communities in these areas showed high biological diversity and the presence of pollution-sensitive species, likely indicating that the waters were relatively unpolluted.
Coastal Benthic Communities
-
SAV plays an important ecological role, for example, in the Chesapeake Bay, where SAV increased from 41,000 to 59,000 acres from 1978 to 2006.
However, current acreage is still less than half of the historical coverage (from the mid-1930s). The extent of these plants is important because the vegetation provides food and habitat for many organisms, adds oxygen to the water, filters sediments, inhibits wave action that erodes shorelines, and absorbs excess nutrients.
Submerged Aquatic Vegetation in the Chesapeake Bay
-
-
There are no national indicators for the extent of coastal waters and many aspects of their condition.
For example, there are no national indicators for SAV, invasive species, harmful algal blooms, condition of coral reefs, or status of coastal fish and shellfish communities.
Documents and Links
- Download Highlights Document Water Chapter (PDF) (8 pp, 392kb)
- Download Highlights Document Drinking Water Topic (PDF) (1 pp, 84kb)
- Technical Document: (Water home)
- Technical Document: (Drinking Water topic)
Population Served by Community Water Systems With No Reported Violations of EPA Health-Based Standards, 1993-2007
All Related Indicators
What You Can Do
To protect public health, EPA sets federal health-based standards for drinking water for public water systems. Public water systems include community water systems—systems that supply drinking water to 25 or more of the same people year-round in their residences. Community water systems serve more than 286 million people, or about 95 percent of the U.S. population.
Public water systems must test for regulated contaminants and treat the water, if needed, to meet the federal standards. Disinfection of drinking water effectively protects against the risk of waterborne diseases such as typhoid, cholera, and hepatitis. Filtration, required for most public water systems that use surface water, provides additional protection against microbial contaminants.
Key Points
-
In 2007, 92 percent of community water system customers (262 million people) were served by facilities for which states reported no violations of EPA's health-based drinking water standards (see graphic).
Approximately 24 million people in 2007 were served by systems for which states did report violations of these standards. A portion, but not all, of these people might have been exposed to contaminants in drinking water at levels above standards. Most of these violations involved rules addressing microbial contaminants or disinfection byproducts (chemicals that can form when disinfectants, such as chlorine, react with naturally occurring materials in water). The level of health risk associated with violations varies, depending partly on which contaminants were involved, the extent to which a standard was exceeded, the extent to which the distribution system was affected, and how long the violation lasted. Microbial violations, in particular, can be short term.
Population Served by Community Water Systems with No Reported Violations of Health-Based Standards
-
These data address drinking water from community water systems only.
They do not address the quality of drinking water that people get from nonpublic supplies (such as private wells and untreated surface water sources), from public water systems serving transient populations (such as roadside rest stops and campgrounds), or from nonresidential users (such as some workplaces and schools). National data are not available for bottled water, which is regulated by the Food and Drug Administration.
-
Health effects that could be caused by contaminants in drinking water are not currently tracked by national indicators.
For example, no national indicator is available for disease occurrence or outbreaks caused by harmful microorganisms in drinking water.
Documents and Links
- Download Highlights Document Water Chapter (PDF) (8 pp, 392kb)
- Download Highlights Document Recreational Waters Topic (PDF) (1 pp, 132kb)
- Technical Document: (Water home)
- Technical Document: (Recreational Waters topic)
What You Can Do
- All Water topics
- Maintain your boats to reduce oil leaks.
- Check local beach closures and advisories, and don't swim at a beach if it is closed.
- If possible, avoid swimming near pollution sources
- Encourage marina owners and operators to provide clean and safe onshore restrooms and pumpout facilities.
The condition of ecosystems and the wildlife within them, which support recreational activities such as fishing and bird watching, is also important. While many of these characteristics can be measured at a local level, there are several barriers to compiling these data into national indicators.
Key Points
-
While information exists about many individual water bodies, consistent national indicators for recreational waters are not yet available.
Many states and localities collect information about individual water bodies in their region. States also monitor coastal beaches for levels of certain disease-causing bacteria and report the results to EPA. However, different states monitor in different ways (for example, by using different methods or monitoring more or less frequently), making it difficult to compile the results into national indicators.
-
Improved data collection could lead to suitable indicators in several areas.
For example, with a comprehensive national system for gathering data, scientists could develop consistent national indicators for bacteria levels at beaches.
Documents and Links
- Download Highlights Document Water Chapter (PDF) (8 pp, 392kb)
- Download Highlights Document Consumable Fish and Shellfish Topic (PDF) (1 pp, 92kb)
- Technical Document: (Water home)
- Technical Document: (Consumable Fish and Shellfish topic)
All Related Indicators
What You Can Do
- All Water topics
- Pay attention to fish consumption advisories.
- Contact your local fish advisory program
- If the fish you eat isn't locally caught, eat up to 12 ounces (2 average meals) a week of a variety of fish and shellfish that are lower in mercury, such as shrimp, canned light tuna, salmon, and catfish.
- Read "What you need to know about mercury in fish and shellfish" (2pp, 236K)
Concerns about fish and shellfish safety are higher for people who eat a lot of fish and groups of people who are particularly vulnerable to contaminants that may be present in fish—such as infants, children, the elderly, and women who are pregnant or might become pregnant.
Of particular interest in measuring the condition of consumable fish and shellfish are chemicals such as mercury, polychlorinated biphenyls (PCBs), the pesticide DDT or dichloro-diphenyl-trichloroethane, and polycyclic aromatic hydro-carbons (PAHs), which form during the combustion of oil, gas, and other organic substances. These compounds can persist in sediments for a long time, increasing their potential for entering the food web and ultimately concentrating in fish that may be eaten by people and wildlife.
Key Points
-
Estuarine sites (sites in areas where a freshwater stream or river meets the ocean) across the nation showed varying levels of contamination in fish tissue.
Sixty-three percent of the sites showed low fish tissue contamination, 15 percent showed moderate contamination, and 22 percent had high contamination based on health-based consumption guidelines (see graphic). PCBs, mercury, DDT, and PAHs were most often responsible for high contamination scores. The condition of coastal fish varied greatly among different areas of the country. The survey did not include Hawaii, the Caribbean, the Pacific territories, or Alaska, which is notable because Alaska produces more than half the nation's commercial fish.
Coastal Fish Tissue Contaminants
-
Lake fish surveys found that several chemicals, including mercury, dioxins and furans, PCBs, and DDT, are widely distributed in the nation's lakes and reservoirs.
However, some other chemicals, including certain pesticides, were detected rarely or not at all. These data do not consider whether the detected levels are a health concern, as this portion of the analysis is not yet complete. The surveys did not include Hawaii, the Caribbean, Alaska, or the Great Lakes.
Contaminants in Lake Fish Tissue
-
While fish consumption advisories provide information on fish from many individual water bodies, these advisories cannot be compiled into a national indicator of fish and shellfish condition.
The states and tribes that issue fish consumption advisories use different ways of monitoring waters and making advisory decisions, so the information is not comparable.
-
There are no consistent national indicators for disease-causing organisms in fish and shellfish, or for the biological and chemical condition of commercially farmed fish and shellfish.
Land is intricately connected to other environmental resources and to human health. For example, land cover affects the energy exchange between the Earth's surface and atmosphere, which in turn influences climate and weather. Changes in land cover can increase or decrease erosion, water runoff, sedimentation, and flooding. Chemicals and wastes can affect human health and the environment when they are applied to or disposed of on land.
Many federal agencies with varying responsibilities collect data on land resources using satellite imagery, national surveys, and regulatory data. These data, in general, represent only a small sample of the total picture of land cover, land use, waste management and disposal, chemicals used on land, and land contamination. States also collect these kinds of data, but differ in their approaches, making it difficult to compile national data on land issues.
Documents and Links
- Download Highlights Document Land Chapter (PDF) (6 pp, 1.2MB)
- Download Highlights Document Land Cover Topic (PDF) (1 pp, 1.01MB)
- Technical Document: (Land home)
- Technical Document: (Land Cover topic)
All Related Indicators
What You Can Do
A number of factors affect land cover, including geology, climate, population changes, and human activities such as industrial and urban development, deforestation or reforestation, water diversion, and road building. The extent and type of land cover in an area can affect habitat quality and availability, species distribution, water quality, climate, and distribution and movement of chemicals.
Key Points
-
Forest cover and agriculture are the two most common types of land cover in the United States.
In 2001, of the approximately 2.3 billion acres of land in the nation, 641 million acres were forest cover, 449 million acres were agriculture, 419 million acres were shrub, 291 million acres were grass, and 103 million acres were developed land. These estimates were derived from satellite data.
Land Cover
-
Land cover types vary greatly by region (see graphic).
Forest cover is predominant in the East and Pacific Northwest, agriculture and grass cover in the Midwest, and shrub cover in the Southwest.
Land Cover
-
The total amount of forest in the United States declined over the last century, but has been increasing in recent years.
Regional variations exist. Forest cover has increased in the Northeast, Mid-Atlantic, and Midwest, and decreased in the West and Southwest.
Forest Extent and Type
-
Comparing and integrating land cover information is difficult.
Different agencies collect data on land cover, often at varying times and for different purposes. These agencies also define and classify land cover differently and at varying levels of detail. The most recent comprehensive data available are from 2001.
Documents and Links
- Download Highlights Document Land Chapter (PDF) (6 pp, 1.2MB)
- Download Highlights Document Land Use Topic (PDF) (1 pp, 104kb)
- Technical Document: (Land home)
- Technical Document: (Land Use topic)
All Related Indicators
What You Can Do
Land use can adversely affect numerous aspects of the environment, including air and water quality, habitat availability, and species distribution. In some cases, land use can also have positive environmental effects, such as when communities restore habitats or clean up and redevelop contaminated lands.
Key Points
-
Widespread land uses in the United States include grazing, timberland, and food crop production.
As of 2003, of the approximately 2.3 billion acres of land in the nation, as many as 721 million acres were used for grazing, 504 million acres were classified as potentially productive forest (known as timberland), 374 million acres were used for food crop production, and 108 million acres were used for development. These data are based on aerial photo interpretation and ground surveys.
Land Use
-
Land use patterns vary greatly by region of the country.
More than three-quarters of the nation's grazing land is in the West, while much of the timberland is concentrated in the East and Southeast.
Land Use
-
The amount of land used for crop production and pasture has declined since 1982, while the amount of developed land has increased and timberland has remained constant.
Conversions of forest land, cropland, and pastureland have contributed to the increases in developed land. Additionally, highly erodable cropland has been removed from production.
Land Use
-
Between 1982 and 2002, the amount of developed land in the United States increased at nearly twice the rate of the population (see graphic).
The amount of developed land grew by about 47 percent, while the population grew by just over 24 percent. Population and development trends varied in different parts of the country. For example, in the West, the amount of land developed since 1982 closely matched population growth, while in the Northeast, the amount of developed land increased at more than three times the rate of population growth.
Urbanization and Population Change
-
The data to track land use trends is limited and derived from many sources, which inhibits the ability to track changes over time.
Various agencies collect land use data, often at different times and for different purposes. Classifications of land use can also vary, making it difficult to integrate and compare data.
Documents and Links
- Download Highlights Document Land Chapter (PDF) (6 pp, 1.2MB)
- Download Highlights Document Wastes and the Environment Topic (PDF) (1 pp, 96kb)
- Technical Document: (Land home)
- Technical Document: (Wastes and the Environment topic)
All Related Indicators
What You Can Do
- All Land topics
- Consider reusing items like containers and bags.
- Whenever possible, purchase household products with the least amount of toxic chemicals and dispose of leftover materials properly.
- Donate your old computers and electronic products to a local eCycling program
- Explore ways to ensure the safe recovery or disposal of used cars and automotive parts and products
- If you are a small business owner that generates hazardous waste, understand your responsibilities (31pp, 995K)
- Recycle whenever possible
Activities such as agriculture, construction/demolition, mining, and other resource extraction and industrial processes generate large quantities of other types of waste. Presently, however, the United States regularly collects information on only municipal solid waste and hazardous waste. These two types of waste make up a small fraction of all of the waste generated in the country.
Once wastes are generated, they must be managed—collected, transported, stored, reused, recycled, processed or treated, or disposed of. Because wastes can contain hazardous chemicals, their generation and management have the potential to contaminate land, air, or water; compromise their use; affect human health; or impact ecological condition. For example, the decomposition of certain kinds of wastes in landfills is a major source of methane. In contrast, industry has taken steps to reduce certain high-priority chemicals (documented contaminants of air, water, land, plants, and animals) found in waste in recent years.
Key Points
-
Since 1990, the per capita municipal solid waste generation rate has remained stable at four-and-one-half pounds per person per day.
As the U.S. population has increased, however, the nation has steadily generated more municipal solid waste. Generation increased from 88 million tons in 1960 to 251 million tons in 2006.
Quantity of Municipal Solid Waste Generated and Managed
-
Hazardous waste generation has declined.
Hazardous waste generation dropped from roughly 36 million tons in 1999 to 28 million tons in 2005. Recycling or composting of municipal solid waste increased from 6 percent to 33 percent since 1960 (see graphic). Hazardous waste recycling rose only slightly between 1999 and 2005 and remains at less than 10 percent.
Quantity of RCRA Hazardous Waste Generated and Managed
-
-
Information about many types of waste is not currently available at the national level.
Also, data are lacking about exposure and the effects of waste and management practices on human health and the environment. The potential effects associated with waste vary widely and are influenced by the substances or chemicals found in waste and how they are managed.
Documents and Links
- Download Highlights Document Land Chapter (PDF) (6 pp, 1.2MB)
- Download Highlights Document Chemicals Applied and Released to Land Topic (PDF) (1 pp, 96kb)
- Technical Document: (Land home)
- Technical Document: (Chemicals Applied and Released to Land topic)
All Related Indicators
What You Can Do
- All Land topics
- Consider ways to reduce or eliminate your use of fertilizers
- Use the Toxics Release Inventory Explorer to find out about toxic and hazardous chemicals released from facilities in your community.
- Contribute ideas and information during the permitting process of facilities that transport, store, or dispose of hazardous waste in your community.
- Ask your grocer about organic foods and products
- If you grow your own vegetables or buy from a local community market, practice and support integrated pest management practices
Chemicals released or applied to the environment can pose a range of challenges to human health and the environment. Some chemicals break down quickly in the environment, while others, such as persistent, bioaccumulative, and toxic (PBT) chemicals, persist for long periods of time and can accumulate in the food web.
Some chemicals can lead to health problems if people receive sufficient doses. For many other chemicals, though, the possible health effects are not yet well known. The effects of long-term exposure to chemicals are often unknown. In addition, some chemicals can harm ecosystems, such as when excess fertilizers are carried in runoff, which can affect water quality and aquatic life.
Key Points
-
The amount of certain toxic chemicals in industrial waste materials decreased by more than 4 billion pounds (16 percent) between 1998 and 2005 (see graphic).
In 2005, the United States handled 1.1 billion pounds of PBT chemicals in industrial waste, along with 24 billion pounds of other toxic chemicals (shown in graphic) that are subject to reporting to EPA under the Toxics Release Inventory (TRI) program. The metal mining industry has accounted for 35 percent of the total TRI chemicals in production-related wastes released to the environment since 1998.
Toxic Chemicals in Production-Related Wastes Released, Treated, Recycled, or Recovered for Energy Use
-
Over the past 45 years, the use of fertilizers, including nitrogen, phosphate, and potash, has increased nearly three-fold.
The combined use of these three chemicals rose from 46 pounds per acre per year in 1960 to 138 pounds per acre in 2005. Nitrogen accounted for the steepest increase. While fertilizers are not inherently harmful, they have the potential to contaminate ground and surface water when applied improperly or in excessive quantities.
Fertilizer Applied for Agricultural Purposes
-
In annual surveys conducted since 1994, 42 to 71 percent of food samples have shown detectable amounts of pesticide residue.
A small fraction of samples (approximately 1 out of every 500) had pesticides at concentrations that exceeded tolerance levels designed to protect human health. Foods tested include fruits, vegetables, grains, meat, and dairy products.
Pesticide Residues in Food
-
Data about chemicals used on land are limited.
Some data are available on pesticide and fertilizer use on agricultural lands. Agencies collect national information on only a fraction of all chemicals used in the United States, however. Consistent national indicators are lacking regarding when, where, and how frequently chemicals are applied to land and the potential impact when they contain toxic ingredients.
Documents and Links
- Download Highlights Document Land Chapter (PDF) (6 pp, 1.2MB)
- Download Highlights Document Contaminated Land Topic (PDF) (1 pp, 84kb)
- Technical Document: (Land home)
- Technical Document: (Contaminated Land topic)
All Related Indicators
What You Can Do
The Comprehensive Environmental Response, Compensation, and Liability Act, also known as Superfund, and the Resource Conservation and Recovery Act (RCRA) are two of the major federal laws governing contaminated lands to protect human health and the environment. The most toxic abandoned waste sites in the nation are listed on the Superfund National Priorities List (NPL). High-priority facilities subject to cleanup under RCRA are included in the RCRA Cleanup Baseline.
Completing cleanups at these complex sites can take years and even decades; therefore, EPA tracks whether people are exposed to contamination above levels of concern, and whether contaminated ground water is spreading above levels of concern.
Key Points
-
Between 2002 and 2007, the percentage of Superfund NPL sites where human exposure to contamination was under control (that is, unlikely to be occurring) remained relatively constant at 82 percent (see graphic).
The other 18 percent of sites either had documented exposure or had not been classified yet.
-
Between 2000 and 2007, the percentage of RCRA Cleanup Baseline sites where human exposure to contamination was demonstrated to be under control increased from 37 to 93 percent.
This increase was due to completion of site investigations, actions taken to prevent exposure to contamination, and further site cleanup.
High-Priority Cleanup Sites with No Human Contact to Contamination in Excess of Health-Based Standards
-
Sites where contaminated ground water was demonstrated not to be spreading above levels of concern increased from 61 to 70 percent of Superfund NPL sites (2002-2007) and from 32 to 79 percent of RCRA Cleanup Baseline facilities (2000-2007).
The increases are due to completion of site investigations, actions taken to mitigate the spread of contaminated ground water, and further site cleanup.
High-Priority Cleanup Sites Where Contaminated Groundwater Is Not Continuing to Spread Above Levels of Concern
-
The total number and extent of contaminated sites nationwide is not known, nor are their specific effects on human health and the environment.
Although EPA tracks the most contaminated sites through the RCRA Cleanup Baseline and Superfund NPL, these sites do not represent the full extent of contaminated lands in the United States. Many other sites managed by local, state, and other federal authorities are not inventoried at the national level.
For people to experience adverse health effects from exposure to an environmental contaminant, various events must occur. First, a contaminant released from its source requires some sort of contact (via air, water, or land) with a person and then must enter the body through inhalation, ingestion, or skin contact. Additionally, a contaminant needs to be present within the body at sufficient doses to ultimately result in a health effect. Understanding the connections between environmental exposure and adverse health effects is particularly challenging because many risk factors other than the environment—including genetics, personal behavior, and health care—also affect health.
Exposure and health data are drawn from many sources. These include records of vital statistics, such as births and deaths; surveys and questionnaires; and surveillance activities, such as cancer registries and other systems. As used in this report, these data are representative of the national population. They are not based on data from targeted populations or tied to specific exposures or releases.
At present, trends in national-level exposure and health indicators cannot be linked to trends in environmental conditions described in other parts of this report, or to predict cause-and-effect relationships between environmental contaminant exposure and an adverse health effect. Instead, these national-level data can help researchers track overall trends in population exposure, health, and disease, including trends across different age, gender, race, and ethnic groups.
Documents and Links
- Download Highlights Document Human Exposure and Health Chapter (PDF) (4 pp, 236kb)
- Download Highlights Document Exposure to Environmental Contaminants Topic (PDF) (1 pp, 80kb)
- Technical Document: (Human Exposure and Health home)
- Technical Document: (Exposure to Environmental Contaminants topic)
Blood Cotinine Concentrations in Children Aged 4-17 by Race and Ethnicity, 1988-1994 Versus 1999-2002
All Related Indicators
What You Can Do
- All Human Exposure and Health topics
- Follow recommended guidelines for eating fish and shellfish
- Check EPA's National Listing of Fish Advisories online
- Get your home and your children tested for lead
- Reduce hazards to your family from lead-based paint
- Keep your home and car free from secondhand smoke.
Biomonitoring data can help track levels of people's exposure to environmental contaminants, but cannot be used to determine how people might have been exposed to a contaminant, or in most cases whether they will become sick. Currently, biomonitoring techniques exist for only a subset of the many environmental contaminants.
Key Points
-
Blood lead levels show a steady decline since the 1980s.
Lead can harm the brain, nervous system, and other organ systems. Children aged 1 to 5 years have the greatest health risk from lead exposure because their systems are still developing. Between 1999 and 2002, 1.6 percent of children aged 1 to 5 years had elevated blood lead levels, decreasing from 88 percent in the late 1970s. The Centers for Disease Control and Prevention define elevated blood lead levels as 10 micrograms of lead per deciliter of blood.
Blood Lead Level
-
About 6 percent of women of child bearing age had at least 5.8 parts per billion of mercury in their blood from 1999 to 2002.
EPA has determined that children born to women with blood concentrations of mercury above 5.8 parts per billion are at increased risk of adverse health effects.
Blood Mercury Level
-
Exposure to environmental tobacco smoke among nonsmokers decreased considerably in the last decade (see graphic).
Nonsmokers who are exposed to environmental tobacco smoke can have elevated levels of cotinine in their blood. Cotinine is a substance that forms in the body following exposure to nicotine.
Blood Continine Level
-
-
Biomonitoring data currently have limitations as indicators of exposure.
Because biomonitoring data do not include the sources of exposure, these indicators alone do not indicate whether measured levels are related to environmental exposures.
Documents and Links
- Download Highlights Document Human Exposure and Health Chapter (PDF) (4 pp, 236kb)
- Download Highlights Document Health Status Topic (PDF) (1 pp, 80kb)
- Technical Document: (Human Exposure and Health home)
- Technical Document: (Health Status topic)
All Related Indicators
What You Can Do
Tracking these kinds of broad health measures helps to identify general patterns in the nation's health status and lay a foundation for studying trends in specific diseases and conditions. In addition, such tracking can help identify possible environmental factors that could contribute to the diseases or conditions that are the leading causes of death in the United States.
Key Points
-
-
Life expectancies in the United States are lower, however, than in many other countries.
In 2004, the United States ranked 35th in life expectancy for men and women among the 192 nations and states that are members of the World Health Organization.
Life Expectancy at Birth
-
The three leading causes of death in the United States-heart disease, cancer, and stroke-remain unchanged since 1999.
Measures of premature death show that injuries are the leading cause of death, followed by cancer and heart disease.
General Mortality
-
Infant mortality in the United States shows a long-term decline, although it remains among the highest in the industrialized world at nearly seven deaths per every 1,000 live births in 2004.
U.S. infant mortality rates were two to three times higher than the lowest rates reported worldwide.
Infant Mortality
-
-
Life expectancy and death rates do not address other aspects of health such as perceived well-being or quality of life.
Though life expectancy and death rates are widely accepted measures of health status, they alone do not completely describe the nation's health.
Documents and Links
- Download Highlights Document Human Exposure and Health Chapter (PDF) (4 pp, 236kb)
- Download Highlights Document Diseases and Health Conditions Topic (PDF) (1 pp, 76kb)
- Technical Document: (Human Exposure and Health home)
- Technical Document: (Diseases and Health Conditions topic)
All Related Indicators
What You Can Do
Tracking the occurrence of these human diseases and conditions at the national level helps identify general patterns or trends over time and across subgroups. Some notable differences are seen across different age groups, races, or ethnic groups for many conditions, such as heart and lung conditions, cancer, asthma, and some birth outcomes, such as birth defects, pre-term deliveries, and low birthweight.
Key Points
-
-
There has been a slight overall rise in the incidence of cancer in children ages 0 to 19 years since the early 1970s.
Leukemia and cancers of the brain and nervous system remain the leading cancers in children. Higher rates of cancer consistently occur among white children compared to black children.
Childhood Cancer Incidence
-
Asthma rates are higher in children and adolescents than in adults, with some distinct patterns across races (see graphic).
Between 1980 and 1996, childhood asthma rates increased about 4 percent each year, with no major shifts observed since 1997. Based on data from 2006, approximately 10 million children (about one in eight) in the United States were reported as having been diagnosed with asthma. American Indians/Alaska Natives and blacks experience the highest asthma rates compared to those reported in other races. Rates are lower in Hispanic/Latino children and adults than in non-Hispanics/Latinos.
Asthma Prevalence
-
No notable patterns were observed for most reportable infectious diseases between 1995 and 2005.
However, some increases were reported between 2002 and 2005 in Lyme disease, Rocky Mountain spotted fever, and Legionnaires' disease.
Infectious Diseases Associated with Environmental Exposures or Conditions
-
-
These indicators provide important insights on disease patterns but cannot be used alone to understand the role of environmental contaminant exposures.
This is because these diseases and conditions are linked to other causes besides environmental exposures. Also, national indicators are not available for other diseases with possible links to environmental contaminants, such as behavioral and neurodevelopmental disorders, and other diseases still being studied for possible connections to environmental contaminant exposure, like Alzheimer's disease and diabetes.
One approach to assessing the nation's ecological condition is to examine its essential attributes, including the extent, distribution, and diversity of ecosystems; ecological processes; physical and chemical attributes; and exposure to pollutants.
Human activities and natural factors can directly or indirectly affect one or more of these attributes, resulting in changes to an ecological system. For example, plant growth might increase in response to heavy rainfalls or decrease in response to contaminant exposure. Such changes can affect the way an ecosystem functions and can have positive or negative consequences for society—such as by altering crop, timber, or fishery yields.
Measuring the nation's ecological condition is challenging. It is not as straightforward as measuring pollutant levels in air, water, and soil. For example, there are numerous groups of animals and plants, but indicators are available for only some of these. Major groups known to be undergoing changes, such as amphibians, are not captured by the available indicators.
Documents and Links
- Download Highlights Document Ecological Condition Chapter (PDF) (6 pp, 572kb)
- Download Highlights Document Patterns in Ecological Conditions Topic (PDF) (1 pp, 188kb)
- Technical Document: (Ecological Condition home)
- Technical Document: (Patterns in Ecological Conditions topic)
All Related Indicators
What You Can Do
Ecological systems are not isolated, but connected to one another. Connectivity refers to the way in which matter, energy, and organisms flow within and among ecosystems. Fragmentation refers to the breaking up of an ecological system into smaller, more isolated parts. When ecological systems become fragmented, habitat is broken up into patches interspersed with other habitat types that might not support the species that were originally present.
Patterns in ecological systems can change in response to natural factors as well as human activities. Natural changes can occur gradually as a result of geological and climatic changes, or more quickly due to events such as extreme weather or wildfires. Human activities that can affect ecological systems include urbanization, agriculture, forest management, introduction of invasive species, and the release of greenhouse gases, which contributes to climate change.
The impact of such changes varies depending on the geographic scale. For example, a storm could create a gap in a forest canopy that only affects the immediate area for several decades. In contrast, widespread loss of wetlands over a large region could permanently shift bird migration routes or make coastlines more vulnerable to hurricanes.
Key Points
-
The total acreage of forest land nationwide declined between the 1930s and the 1970s, but increased over the last three decades.
Trends in forest acreage vary by region and by forest type. For example, in the West, the acreage of fir-spruce and hardwood forest increased over the past 50 years, while the extent of other forest types, including many pine forests, decreased (see graphic).
Forest Extent and Type
-
Slightly more than 26 percent of the forest land in the lower 48 states occurs in landscapes completely dominated by forest, while 19 percent of forest land is considered highly fragmented.
Forests can be fragmented by human activities and by natural factors such as forest fires.
Forest Fragmentation
-
-
Little information is available on the extent of ecological systems other than forests and wetlands, or about the effects of fragmentation on biodiversity and ecological processes at different geographic scales.
Documents and Links
- Download Highlights Document Ecological Condition Chapter (PDF) (6 pp, 572kb)
- Download Highlights Document Biological Diversity Topic (PDF) (1 pp, 132kb)
- Technical Document: (Ecological Condition home)
- Technical Document: (Biological Diversity topic)
All Related Indicators
What You Can Do
- All Ecological Condition topics
- Volunteer in monitoring activities
- Maintain good wildlife habitat on your property for birds, butterflies, and other animals.
- Consider biodegradable or phosphate-free alternatives to common household chemicals
- Enhance the environment for native wildlife species
- Protect lakes, rivers, and streams from invasive species
Trends in the number and composition of species within an ecological system are important indicators of the system's health and robustness. Scientists generally agree that as the number of species in an ecological system declines, the system is less able to recover from stress. These relationships are not straightforward and can vary in degree, depending on the types of species introduced or removed from a system.
Diversity arises over time when adaptation results in new species that fill available niches in the environment. This is a dynamic process involving colonization, evolution of species adapted to new conditions, and extinction of species that are less well adapted to a changing environment. This process has occurred over millions of years across large geographic areas, punctuated occasionally by significant natural events such as meteor strikes, periods of intense volcanic activity, and ice ages.
Human activities—such as urbanization, water management, and land use changes—can have profound effects on biological diversity, and in a much shorter timeframe. For example, in sewage-polluted waters, dense beds of a single species, sludgeworms, can replace the more diverse communities of bottom-dwelling organisms ordinarily present. Invasive species also can have widespread effects. As the sea lamprey spread through the Great Lakes in the mid-20th century, for instance, sweeping changes occurred throughout the entire food web.
Key Points
-
Watersheds covering almost one-quarter of the area of the lower 48 states have lost at least one-tenth of the native freshwater fish species known to have been present at some time prior to 1970.
Losses are especially severe in the Southwest and the Great Lakes, where eight watersheds have lost more than half their native fish species. Fish diversity can decline for a number of reasons, such as pollution, habitat alteration, fisheries management, and invasive species. In contrast, watersheds covering about 21 percent of the lower 48 states have retained all of their native species.
Fish Faunal Intactness
-
In recent years, changes (both decreases and increases) have occurred in bird populations in various habitats.
Changes in bird populations reflect changes in landscape and habitat, food availability and quality, toxic chemical exposure, and climate. Since 1966, substantial decreases occurred in 70 percent of grassland species and 36 percent of shrubland species. Substantial increases occurred in 40 percent of urban species and 38 percent of water and wetland species (see graphic).
Bird Populations
-
For several aspects of biological diversity, there are no consistent national indicators.
These include major groups of animals such as amphibians, reptiles, and mammals; plants; and the numbers of threatened, endangered, and invasive species.
Documents and Links
- Download Highlights Document Ecological Condition Chapter (PDF) (6 pp, 572kb)
- Download Highlights Document Ecological Processes Topic (PDF) (1 pp, 136kb)
- Technical Document: (Ecological Condition home)
- Technical Document: (Ecological Processes topic)
All Related Indicators
What You Can Do
Organisms that produce organic matter from inorganic matter using energy from the sun are known as primary producers. They range in size from microscopic ocean plants to the giant redwoods of California. Decreases in primary production affect all the animal populations that depend on that production for food. Too much primary production (for example, algal blooms in water bodies) is also a problem.
Many human and natural factors impact ecological processes, including pollution and changes in land use, such as conversion of forests to urban or agricultural land. Trends in ecological processes, such as the cycling of carbon and carbon storage, provide insight into the structure and function of ecological communities and how human and natural factors affect them.
Although there are numerous components of the carbon cycle, an indicator is available for only one of these components—carbon storage in forests. This indicator provides insight into a portion of the carbon cycle for forest ecosystems.
Key Points
-
Overall, the net storage of carbon in U.S. forests has been positive since 1953.
The rate of storage increased between the 1950s and 1980s, but declined from 1987 to 1996. Net storage reflects the growth of trees minus the amount of carbon lost through harvesting, land use change, or disturbances such as fire, insects, and disease. The greatest amount of carbon is being stored in the North, followed by the Rocky Mountain region. Carbon storage has decreased in the South, possibly due to an increase in harvesting compared to growth (see graphic).
Carbon Storage in Forests
-
A number of gaps exist in understanding trends in ecological processes.
Currently, no reliable national indicators are available for primary production, nutrient retention and processing, or reproduction and growth rates for plant and animal populations. There are also no national indicators for other functions that ecosystems perform, such as the provision of natural resources and regulation of air and water quality. No indicator is available for carbon stored in forest soil or in other ecosystems.
Documents and Links
- Download Highlights Document Ecological Condition Chapter (PDF) (6 pp, 572kb)
- Download Highlights Document Physical and Chemical Attributes of Ecological Systems Topic (PDF) (1 pp, 100kb)
- Technical Document: (Ecological Condition home)
- Technical Document: (Physical and Chemical Attributes of Ecological Systems topic)
All Related Indicators
What You Can Do
- All Ecological Condition topics
- Replace conventional bulbs in your five most frequently used light fixtures with ENERGY STAR certified bulbs
- At work, you can save energy and reduce greenhouse gas emissions by turning off lights and office equipment when you leave.
- Plant native trees and groundcovers that tolerate wet or seasonally flooded sites along stream banks
- If you live or vacation along the coast, consider measures to protect your property from potential sea level rise
As species evolve, they respond to and reflect the physical and chemical attributes of the ecological systems in which they live. For example, species that evolved in tropical waters require higher, less variable temperatures than species that evolved in temperate waters, where average temperatures are lower and fluctuate more. Similarly, periodic floods or fires are essential to sustain many species in areas where such events have occurred over thousands or millions of years.
Many factors can alter the physical and chemical characteristics of ecological systems. For example, acid rain can increase the acidity of lakes in some regions. Damming or channelizing rivers can alter the flooding and sedimentation processes that sustain particular types of systems, such as wetlands. Changes in climate can alter species diversity and nearly every aspect of ecological structure and function.
Key Points
-
Since 1901, U.S. and global temperatures have risen at an average rate of 0.12°F per decade (see graphic).
Lately, the rate of warming has increased. Over the last 30 years, temperatures rose by 0.59°F per decade in the lower 48 states and 0.31°F per decade worldwide (see graphic). These trends are consistent with reduced snow cover, earlier spring ice melt, and increased sea surface temperature, all of which can affect ecological systems. It is very likely that most of the observed temperature increase is due to rising levels of greenhouse gases in the atmosphere caused by human activities.
U.S. and Global Mean Temperature and Precipitation
-
Sea levels rose steadily at many coastal locations between 1950 and 1999, particularly the Mid-Atlantic coast (3 to 6 millimeters per year) and at two sites in Louisiana (as high as 9 to 12 millimeters per year).
These rates are based on tidal gauges that measure relative sea level rise, which accounts for sea and land height changes but does not distinguish between the two. Sea level rise can alter ecological conditions in coastal areas. Effects can include increased flooding and loss of freshwater systems as they are transformed into inland salt waters or open coastal waters.
Sea Level
-
About 25 percent of the nation's small streams show strong evidence of excess fine sediments, which can diminish habitat for aquatic life.
Various land use practices, as well as modifications in stream flows, can lead to excess sedimentation in streams.
Streambed Stability in Wadeable Streams
-
Gaps remain in assessing national trends in the physical and chemical attributes of ecological systems.
Recent monitoring programs have provided a baseline for national trends in nutrients, acidity, and other factors in streams and estuaries. However, there still is a lack of trend data or historical baselines for some attributes, such as water levels in lakes, amount of snowpack, and long-term patterns of flooding and fires.
Documents and Links
- Download Highlights Document Ecological Condition Chapter (PDF) (6 pp, 572kb)
- Download Highlights Document Ecological Exposure to Contaminants Topic (PDF) (1 pp, 168kb)
- Technical Document: (Ecological Condition home)
- Technical Document: (Ecological Exposure to Contaminants topic)
All Related Indicators
What You Can Do
- All Ecological Condition topics
- Reduce driving, carpool, use public transportation, walk, or bicycle
- Help your local electric utilities reduce ozone air pollution by conserving energy at home and the office.
- Avoid or minimize the use of pesticides and fertilizers
- Dispose of pharmaceuticals and personal care products in a safe and responsible manner.
Once inside an organism, certain chemicals build up over time with repeated exposure. This process is called bioaccumulation. Exposure to these chemicals can be determined by measuring chemical concentrations in plant and animal tissues. Other chemicals do not bioaccumulate but can still cause harm. For example, ozone pollution can damage the leaves of plants. Direct observations can indicate exposure to contaminants if the damage is visible.
Key Points
-
In many areas of the country, at least 20 percent of ozone-sensitive forest plants show at least some injury from ozone pollution (see graphic).
The Mid-Atlantic and Southeast show the highest levels of injury, while the Rocky Mountains and Pacific Northwest show no damage. Ozone pollution in the lower atmosphere can affect forest ecosystems. Damage to leaves is usually the first visible sign of injury to plants from ozone exposure.
Ozone Injury to Forest Plants
-
-
No consistent national indicators are available that measure the level of chemicals in plants or in wildlife other than fish.
Therefore, no national trends are available for exposure of plants and animals to many common environmental pollutants.