| View previous topic :: View next topic |
| Author |
Message |
gbabasid
Horus (New Member)
Joined: 22 May 2008
Posts: 4
Location: Greece
|
 Posted: Thu May 22, 2008 6:00 am Post subject: KDE unable to start after ISIS installation (SOLVED) |
|
|
Hello. Recently I installed ISIS2 on a SUSE 10.2 environment. After the installation the KDE is unable to start. What should I do to start KDE again? I have to say that I am not an experienced linux user.
Thank you in advance
George Bampasidis |
|
| Back to top » |
|
 |
janderson
Isis Support Team
Joined: 27 Feb 2004
Posts: 912
Location: USGS Astrogeology Research Program, Flagstaff, AZ
|
| Posted: Tue May 27, 2008 7:56 am Post subject: |
|
|
Hi George,
I'm just checking. You installed ISIS2 or ISIS3 ?
Jeff |
|
| Back to top » |
|
|
gbabasid
Horus (New Member)
Joined: 22 May 2008
Posts: 4
Location: Greece
|
| Posted: Tue May 27, 2008 4:11 pm Post subject: KDE unable to start |
|
|
Hi Jef,
I installed ISIS 2
George |
|
| Back to top » |
|
|
janderson
Isis Support Team
Joined: 27 Feb 2004
Posts: 912
Location: USGS Astrogeology Research Program, Flagstaff, AZ
|
| Posted: Wed May 28, 2008 11:27 am Post subject: |
|
|
Hi,
We are in are the process of finding a SuSE 10.2 system for testing ISIS2 installation and will let you know what we find out.
Thanks, Jeff |
|
| Back to top » |
|
|
gbabasid
Horus (New Member)
Joined: 22 May 2008
Posts: 4
Location: Greece
|
| Posted: Wed May 28, 2008 2:22 pm Post subject: |
|
|
Thank you for your help Jeff
 |
|
| Back to top » |
|
|
janderson
Isis Support Team
Joined: 27 Feb 2004
Posts: 912
Location: USGS Astrogeology Research Program, Flagstaff, AZ
|
| Posted: Thu May 29, 2008 7:32 am Post subject: |
|
|
Hi George,
We've tested on a SuSE 10.2 machine and experienced the same problem. Once we have a solution we will let you know.
Thanks, Jeff |
|
| Back to top » |
|
|
skoechle
Isis Support Team
Joined: 15 Jun 2007
Posts: 142
Location: USGS Astrogeology Research Program, Flagstaff, AZ
|
| Posted: Fri May 30, 2008 3:57 pm Post subject: |
|
|
| This post was moved from ISIS 3 Support to Installation Support for ISIS 2 |
|
| Back to top » |
|
|
skoechle
Isis Support Team
Joined: 15 Jun 2007
Posts: 142
Location: USGS Astrogeology Research Program, Flagstaff, AZ
|
| Posted: Fri May 30, 2008 4:22 pm Post subject: |
|
|
There are two problems here, first there is a shared library conflict with libgcc. To fix this problem you need to do the following: (NOTE: you may prefer to move the library instead of removing it, just ensure it is moved to a directory that is not in your system paths)
| Code: |
cd $ISISR/3rdparty/local/lib;
rm libgcc_s.so.1; |
At this point you should have no problem with KDE. You should be able to run SUSE 10.2 fine from this point. Unfortunately, during the testing I found the ISIS 2 graphical stuff was broken.
SUSE 10.2 is using upgraded libraries that are not compatible with ISIS 2. Depending on if you are using 32 or 64 bit Linux, you need to download the appropriate patch below and install the files into the ISIS 3rdparty libraries.
| Code: |
cd $ISISR/3rdparty/local/lib;
tar zxvf /path_to_tar_file/xm32.tar.gz; |
After these are in place you should be able to run an application like qview and it should work fine. |
|
| Back to top » |
|
|
gbabasid
Horus (New Member)
Joined: 22 May 2008
Posts: 4
Location: Greece
|
| Posted: Sat May 31, 2008 12:32 am Post subject: |
|
|
Thank you very much. You are really helpful
I am thinking to use ISIS 3 instead of ISIS 2 in SUSE 10.2 enviroment. Are Cassini files supported by ISIS 3?
George |
|
| Back to top » |
|
|
skoechle
Isis Support Team
Joined: 15 Jun 2007
Posts: 142
Location: USGS Astrogeology Research Program, Flagstaff, AZ
|
| Posted: Tue Jun 03, 2008 8:07 am Post subject: |
|
|
| Sorry for the delay. Yes, Isis 3 supports Cassini Files. |
|
| Back to top » |
|
|
|
