FIGURE VI-18
Below is an example of a ½” plastic pipe inserted into an electrofusion coupling which is electrofused onto a 2” electrofusion saddle fitting.
Revised – May, 2002 VI-30
FIGURE VI-18A
An example of a 1 ¼” plastic service line from a 2” PE plastic main (for illustration purposes only).
Plan
Elevation
Revised – May, 2002 VI-31
The following two pages (FIGURES VI-23A AND 23B) illustrate a steel to plastic connection using a coupling. There are other sizes of connections. Refer to specific manufacture’s instructions for the proper couplings and coupling procedures.
FIGURE VI-23A
Revised – May, 2002 VI-36
|