|
Powered
industrial trucks, commonly called forklifts or lift trucks, are used in many
industries, primarily to move materials. They can be used to move, raise, lower,
or remove large objects or a number of smaller objects on pallets or in boxes,
crates, or other containers.
The hazards commonly associated with powered industrial trucks vary depending on
the vehicle types and the workplace where the truck is used. Each type of truck presents different operating hazards. For
example, a sit-down, counterbalanced high lift rider truck is more likely than a
motorized hand truck to be involved in a falling load accident, because the
sit-down rider truck can lift a load much higher than a hand truck. Workplace
conditions also present different hazards. For example, retail establishments
often face greater challenges than other worksites in maintaining pedestrian
safety.
The best way to protect employees from injury also depends on the type of truck
operated and worksite where it is being used. This eTool* specifically provides information on OSHA's Powered
Industrial Truck requirements [29
CFR 1910.178] and industry best practices addressing:
-
The differing types and fundamentals of powered trucks
-
The basic operating rules and safe work practices
-
How workplace conditions can affect safe operation
-
Operator training required by OSHA
|
|
Note: This eTool is
intended as a resource for providing training under
OSHA's Powered Industrial Truck standard. This eTool focuses on powered
industrial trucks commonly used in general industry. It is not a substitute for any of
the provisions of the Occupational Safety and Health Act of 1970, for the
powered industrial truck standard, or for any other OSHA standards. It is also
not a substitute for a powered industrial truck operator training program. |
|
|
It is a violation of Federal law for anyone
UNDER 18 years of age to operate a forklift
or for anyone OVER 18 years of age who is not properly trained and certified
to do so. [More...]
|
*eTools are "stand-alone",
interactive, Web-based training tools on occupational safety and health topics.
They utilize graphical menus as well as expert system modules. As indicated in
the
disclaimer,
eTools do not create new OSHA requirements.
|
|