Create and manage 512 acres of marsh to provide northern Mexican gartersnake habitat. This created habitat will also be habitat for the Yuma clapper rail (conservation measure CLRA1). Of the 5,940 acres of LCR MSCP created cottonwood-willow I-IV, 984 acres will be created and managed near to marshes to provide northern Mexican gartersnake habitat. Additional northern Mexican gartersnake habitat may be provided by marsh vegetation that becomes established along margins of the 360 acres of backwaters that will be created. These small patches of habitat may provide linkages between existing habitat and may facilitate the colonization of created habitats. Marsh associated with backwaters that are disconnected from the LCR channel are of higher value to northern Mexican gartersnake than connected backwaters on the LCR and are the preferred type to achieve LCR MSCP conservation goals for this species. Marsh associated with disconnected backwaters are managed to limit non-native predatory species, to the extent practicable. The design and management criteria described in the conservation measures for Yuma clapper rail (HCP Section 5.7.1), California black rail (HCP Section 5.7.13), southwestern willow flycatcher (HCP Section 5.7.2) and yellow-billed cuckoo (HCP Section 5.7 .14) will ensure that created cottonwood-willow and marsh areas will also provide other habitat requirements for this species.

Implement measures to avoid or minimize take of northern Mexican gartersnakes. These measures could include worker education programs and other practices in accordance with LCR MSCP best management practices.

Created species habitats will be managed to maintain their functions as species habitat over the term of the LCR MSCP. Created habitat will be monitored and adaptively managed over time to determine the types and frequency of management activities that may be required to maintain created cottonwood-willow, honey mesquite, marsh, and backwater land cover as habitat for covered species. This conservation measure applies to those species for which comparable measures are not subsumed under species-specific conservation measures (Section 5.7 in the HCP). They are not applicable to species for which habitat would not be created under the LCR MSCP Conservation Plan, such as the desert tortoise, relict leopard frog, humpback chub, and threecorner milkvetch.

To the extent practicable, establishment and management of LCR MSCP–created habitats will avoid removal of existing cottonwood-willow stands, honey mesquite bosques, marsh, and backwaters to avoid and minimize impacts on habitat they provide for covered species. Temporary disturbance of covered species habitats, however, may be associated with habitat creation and subsequent maintenance activities (e.g., controlled burning in marshes and removal of trees to maintain succession objectives). LCR MSCP conservation measures that could result in such temporary disturbances will, to the extent practicable, be designed and implemented to avoid or minimize the potential for disturbance. In addition to implementing AMM3 and AMM4 below, these measures could include conducting preconstruction surveys to determine if covered species are present and, if present, implementing habitat establishment and management activities during periods when the species would be least sensitive to those activities; or redesigning the activities to avoid the need to disturb sensitive habitat use areas; staging construction activities away from sensitive habitat use areas; and implementing BMPs to control erosion when implementing ground disturbing activities.

Impacts on groundwater levels that support covered species habitat at Topock Marsh will be avoided by maintaining water deliveries for maintenance of water levels and existing conditions. At times, flow-related activities could lower river elevations to levels that could disrupt diversion of water from the river to the marsh. Improvements to intake structures that allow water to continue to be diverted or other measures to maintain the water surface elevation will avoid effects on groundwater elevation. Avoidance of effects could be accomplished with the purchase, installation, and operation of two electric pumps sized to the current inflow at the Topock Marsh diversion inlet. The pumps would most likely need to be operated during summer to make up for the lower flow periods.

Implementation of this conservation measure would maintain existing habitat at Topock Marsh for the Yuma clapper rail, southwestern willow flycatcher, Colorado River cotton rat, western least bittern, California black rail, yellow-billed cuckoo, gilded flicker, vermilion flycatcher, Arizona Bell's vireo, and Sonoran yellow warbler. The extent of covered species habitat impacts that will be avoided by maintaining water deliveries to Topock Marsh are presented in Table 4-2 in the HCP. Maintaining water deliveries to Topock Marsh will also maintain razorback sucker and bonytail habitat associated with disconnected backwaters managed for these species.

LCR MSCP–created habitats that require irrigation to establish and maintain vegetation to provide habitat will be designed and managed to minimize contaminant loads that could return to the LCR as runoff or return flow. Measures will include vegetation establishment methods that minimize the need for application of herbicides, pesticides, and fertilizers and designing irrigation methods and new irrigation infrastructure to reduce runoff and return-flows to the extent practicable. Use of pesticides is not a covered activity. Pesticides used to establish and maintain LCR MSCP habitats, however, will be applied in accordance with EPA restrictions and, as needed, authorization for their use will be sought under separate permits.

To the extent practicable, before implementing activities associated with OM&R of hydroelectric generation and transmission facilities, measures will be identified and implemented that are necessary to avoid take of covered species where such activities could otherwise result in take. These measures could include conducting surveys to determine if covered species are present and, if so, deferring the implementation of activities to avoid disturbance during the breeding season; redesigning the activities to avoid the need to disturb covered species habitat use areas; staging of equipment outside of covered species habitats; delineating the limits of vegetation control activities to ensure that only the vegetation that needs to be removed to maintain infrastructure is removed; stockpiling and disposing of removed vegetation in a manner that minimizes the risk of fire; and implementing BMPs to control erosion when implementing ground disturbing activities.

To the extent practicable, before initiating activities involved with river maintenance projects, measures will be identified and implemented that avoid or minimize take of covered species where such activities could otherwise result in take. Such measures could include alternative methods to achieve project goals, timing of activities, pre-activity surveys, and minimizing the area of effect, including offsite direct and indirect effects (e.g., avoiding or minimizing the need to place dredge spoil and discharge lines in covered species habitats; placing dredge spoils in a manner that will not affect covered species habitats).

Management of LCR MSCP conservation areas will include contributing to and integrating with local, state, and Federal agency fire management plans. Conservation areas will be designed to contain wildfire and facilitate rapid response to suppress fires (e.g., fire management plans will be an element of each conservation area management plan).

In the event of created-habitat degradation or loss as a result of wildfire, land management and habitat creation measures to support the reestablishment of native vegetation will be identified and implemented.