Search results for “low VOC”
Low VOC
VOCs are volatile organic compounds – toxins that are found within products (paints, adhesives, cleaners, carpets, particle board, etc) and that are released into a space’s indoor air, thus harming its quality. Low VOC products are those that meet or exceed various standards for low-emitting materials. Low-emitting standards include Green Seal, SCAQMD, CRI Green Label Plus, Floor Score, etc.
http://www.wbdg.org/resources/greenproducts.php?r=mou_rc
Learn & Plan Topics
-
Indoor Air Quality
EPA studies indicate indoor levels of pollutants may be up to ten times higher than outdoor levels. Source: Environmental Protection Agency (2008). An Introduction to Indoor Air Quality. http://www.epa.gov/iaq/voc.html -
Materials, Furniture, and Furnishings Replacement
Daily wear and tear means that materials, furniture and furnishings require periodic replacement.
-
Space Reconfiguration and Renovation Projects
As needs change over time, tenants often need to convert space or phase the conversion of individual space or rooms to meet these changing needs.
-
Spatial Equity
Organizations today are less hierarchical and work is more team based, more mobile, and more cross functional. A key to spatial equity is that space layout and workstation standards are based on new ways of working and specific work tasks and business needs rather than organizational hierarchy.
-
Building Systems Upgrades
The following are Sustainable Strategies to consider as your space undergoes a building system upgrade to improve energy, water use and occupant comfort. Refer to the Share Section for a representative project Case Study to discover key practices, benefits, results and checklists.
-
Sustainable Building Operations and Maintenance Services
Follow these sustainable strategies as your space renovations are complete and the building and interiors are operated in an environmentally sustainable manner. Operations staff should endeavor to establish best practices in energy efficiency, resource conservation, ecologically sensitive products, and other sustainable practices, and implement them.
-
Under 10,000 SF Interiors Gut Rehab Project
Following are Sustainable Strategies to consider as the space has or will undergo a major tenant gut rehab for projects under 10,000 SF. Note to use a current version of LEED for Commercial Interiors for tenant improvement projects over 10,000 SF. Refer to the Share Section for a represented project Case Study to discover key practices, benefits, results and checklists.
-
Health
Good health has both physical and psychological components. Being healthy means the absence of disease and illness, as well as feeling positive about life and work. The workplace can play a role in the health of workers by eliminating risks and creating conditions that support cognitive, emotional, and social well being.
Whole Building Analysis
-
Low-emitting Materials (Resources > IEQ)
-
Green Tips (Resources > Water)
-
CIEB (Mandates / Rating Systems > Water)
-
IEQc4.1 (Mandates / Rating Systems > IEQ)
-
IEQc4.2 (Mandates / Rating Systems > IEQ)
-
IEQc4.3 (Mandates / Rating Systems > IEQ)
-
IEQc4.4 (Mandates / Rating Systems > IEQ)
-
IEQ4.5 (Mandates / Rating Systems > IEQ)
-
IEQc4.1 (Mandates / Rating Systems > IEQ)
-
IEQc4.2 (Mandates / Rating Systems > IEQ)
-
IEQc4.3 (Mandates / Rating Systems > IEQ)
-
IEQc4.4 (Mandates / Rating Systems > IEQ)
-
Green Tips (Resources > IEQ)
-
Green Tips (Resources > Lighting)
-
Green Tips (Resources > Lighting)
-
Green Tips (O&M > IEQ)
-
Case Studies (Financial > HVAC)
-
System Overview (HVAC)
-
Facility Manager (Integrative Design Process > Lighting)
-
Refrigerants (Resources > HVAC)
-
Owner (Integrative Design Process > HVAC)
-
Views (Resources > IEQ)
-
The HPSB Guiding Principles for New Construction and Major Renovations (Mandates / Rating Systems > IEQ)
-
The HPSB Guiding Principles for Existing Buildings (Mandates / Rating Systems > IEQ)
-
Sick Building Syndrome (SBS) (Human Behavior > IEQ)
-
Materials (Resources > Lighting)
-
Fixture Performance (O&M > Water)
-
Green Globes Continual Improvement of Existing Buildings (CIEB) (Mandates / Rating Systems > Water)
-
Masking (Resources > IEQ)
-
LEED for Commercial Interiors (2009) (Mandates / Rating Systems > IEQ)
-
LEED for New Construction (2009) (Mandates / Rating Systems > IEQ)
-
Flush Fixtures (Resources > Water)
-
Flow Fixtures (Resources > Water)
-
Landscaping (Resources > Water)
-
Absorption (Resources > IEQ)
Materials
-
Glass - Low Emissivity
A Low-E coating is a microscopic thin layer of metal or metal oxide deposited on window glass to prevent heat and ultra-violet (UV) rays from passing through the glass. -
Pressure-Assisted / Low-flow
Pressure-assisted toilets use the pressure from the main water line to more efficiently empty the bowl and use less water. Low-flow flush valves used in toilets are those that use less than 1.6 gallons of water per flush. -
Low-Flow
-
Low-Flow Shower
Low-flow showerheads use less than 2.5 gallons of water per minute GPM. Look for dual-flow shower controls that allow the user to reduce and restore the water flow during times of soaping and rinsing while maintaining the same temperature of the water. -
Low-flow Faucet
-
Low-Flow Urinal
-
Daylight Controls
Daylight controls measure the amount of daylight/ambient light in a room and adjust the electric light levels accordingly. Daylight controls should be designed with multiple zones to reflect the differing levels of ambient light entering a space. In areas closest to the window where there is a great deal of daylight in the space, the controls dim the electric light levels; and in areas farther away from the window with lower levels of daylight, the controls increase the amount of electric light in the space. -
Casework / Millwork
Select casework and millwork that have sustainable attributes such as rapidly renewable, recycled content and sustainably managed forest material. Also look for products that are low-VOC and formaldehyde-free. In addition, consider ease of maintenance and durability when choosing any material. -
Daylight Controls
Daylight controls measure the amount of daylight/ambient light in a room and adjust the electric light levels accordingly. Daylight controls should be designed with multiple zones to reflect the differing levels of ambient light entering a space. In areas closest to the window where there is a great deal of daylight in the space, the controls dim the electric light levels; and in areas farther away from the window with lower levels of daylight, the controls increase the amount of electric light in the space. -
Dual-flush Toilets
Dual-flush toilets have two levels of flushing - one for solid waste and a lower flush for liquid waste. There are dual-flush options for both commercial flush valve applications and for tank-type toilets. -
Metering / Sensor-operated
Metering faucets dispense water for a pre-determined period of time. Combined with a low-flow aerator, metering faucets deliver a pre-defined volume of water (0.125 gpc - gallon per cycle). Electronic faucets use a motion controlled sensor to activate water flow. They can either be programmed to turn off when motion ceases or based on a predetermined period of time. Both metering and sensor-operated faucets can use low-flow aerators; however, the faucet may cost more than conventional faucets.
Green Products
-
Very Low Temperature Refrigeration Systems
in Appliances -
Cordless Phones
in Office Electronics -
Docking Stations
in Office Electronics -
Docking Stations: Audio Amplification
in Office Electronics -
Docking Stations: With Optical Disc Drive Functions
in Office Electronics -
Fax Machines
in Office Electronics -
Printers
in Office Electronics -
Paint
in Building Finishes