Tide gauge
A tide gauge (also known as mareograph or marigraph[1]) is a device for measuring the change in sea level relative to a datum.
Sensors continuously record the height of the water level with respect to a height reference surface close to the geoid. Water enters the device by the bottom pipe (far end of the tube, see picture), and electronic sensors measure its height and send the data to a tiny computer.
Historical data are available for about 1,450 stations worldwide, of which about 950 provided updates to the global data center since January 2010.[2] At some places records cover centuries, for example in Amsterdam where data dating back to 1700 is available.[3] When it comes to estimating the greater ocean picture, new modern tide gauges can often be improved upon by using satellite data.
Tide gauges are used to measure tides and quantify the size of tsunamis. The measurements make it possible to derive the mean sea level. Using this method, sea level slopes up to several 0.1 m/1000 km and more have been detected.
A tsunami can be detected when the sea level begins to rise, although warnings from seismic activity can be more useful.
Contents
History[edit]
Sea-level measurements were made using simple measuring poles or "tide staffs" until around 1830, when self-recording gauges with mechanical floats and stilling wells were introduced.[4] They were the primary means of sea-level measurement for over 150 years and continue to operate at some locations today. While still part of modern-day tide gauge instrumentation, these technologies have since been superseded by pressure gauges, acoustic gauges or radar gauges.
The following types of tide gauges have been used historically:[5]
- Kelvin type tide gauge
- Fuess type tide gauge
- GSI type tide gauge
- High accuracy automatic tide gauge
- High resolution automatic tide gauge
Common applications[edit]
Tide gauges have a practical application in the shipping and fishing industries where low or high tide levels can hinder or prohibit access to shallow bays or locations with bridges. To this end, many industries have installed private tide gauges in ports across the country and also rely on government agencies (such as NOAA).
Data collected from tide gauges is also of interest to scientists measuring global weather patterns, the mean sea water level, and trends - notably those potentially associated with global warming.
Modern gauges[edit]
In recent years new technologies have developed allowing for real-time, remote tide information to be published online via a solar powered wireless connection to a tide sensor. Ultrasonic sensors[6] have already been deployed to great effect and the data is regularly broadcast via Twitter and also displayed online.[7]
Tide gauge at Fort Denison in Sydney, Australia[edit]
Tides have been measured at Fort Denison since 1857 on completion of the fort, initially using a bench mark cut into the stonework of the Martello Tower. From 1867 successive instruments were used as tide measuring technology developed.[8] (The measurements since 1886 are graphed by NOAA).[9]
The Fort Denison photographs below show float activated tide gauge instruments in a cabinet and the system's stilling well.[10] A wire connected to the upper drum mechanism passes out through the bottom right of the cabinet and runs over a pulley to drop down to the float system in the large pipe in the well. This system is now obsolete at Fort Denison but maintained as a museum exhibit. To the right of the large pipe in the well is an enclosed pipe which rises to the active modern system.
Tide heights and times at Fort Denison are the primary base referent for published tide information for other places in the state of New South Wales.
Tide gauge installation and instrumentation at Fort Denison | ||||||
---|---|---|---|---|---|---|
|
See also[edit]
References[edit]
- ^ "4. Tide, Mareograph, Sea Level - International Tsunami Information Center".
- ^ "Obtaining Tide Gauge Data". Permanent Service for Mean Sea Level. PSMSL. Retrieved 7 March 2016.
- ^ "Other Long Records not in the PSMSL Data Set". PSMSL. Retrieved 11 May 2015.
- ^ Tide gauge history UK National Oceanographic Centre
- ^ "History of tide gauges". Tide Observation. Geospatial Information Authority of Japan. Retrieved 19 April 2014.
- ^ "Remote Monitoring a MaxSonar®".
- ^ "ioBridge Apps - Ockway Bay Tide Levels".
- ^ Refer the interpretive panel installed in the tide room at Fort Denison.
- ^ "Global Sea Level Trends - Mean Sea Level Trend".
- ^ "Error404".
External links[edit]
![]() |
Wikimedia Commons has media related to Tide gauges. |
- Historical Examples Brown University
- Mean Sea Level Explanation
- NOAA Tide Data
- Hydrometrie (German)