Document ID | Title | Date |
---|---|---|
DOE-HDBK-1028-2009 |
Human Performance Improvement Handbook Volume 1 of 2 This Human Performance Improvement Handbook is a reference for anyone working in the Department of Energy (DOE) community who wants to learn more about human performance and how it can be improved.The handbook addresses the roles of individuals, leaders, and the organization in improving performance. |
06/22/2009 |
DOE-HDBK-1028-2009 |
Human Performance Improvement Handbook Volume 2 of 2 This good practice handbook provides a set of practical methods and techniques for anticipating, preventing, and catching active human errors; and, more importantly, identifying and mitigating latent errors attributable to organizational factors. |
06/16/2009 |
DOE-HDBK-1046-2016 |
Temporary Emergency Exposure Limits for Chemicals: Method and Practice This document describes why TEELs are needed, their role in emergency planning in DOE, the history of their development, and the methods by which they are developed. TEEL values are developed by a team of chemists/toxicologists established by DOE Headquarters. This is the second publication of the DOE Handbook describing TEELs. |
01/06/2017 |
DOE-HDBK-1076-94 |
Table-Top Job Analysis This Handbook establishes the guidance necessary to conduct table-top job analysis. An overview of job analysis is provided that is followed by a look at some of the types of analysis that are conducted. Finally, the table-top job analysis method is explained in detail. |
07/15/1996 |
DOE-HDBK-1078-94 |
Training Program Handbook: A Systematic Approach to Training This Department of Energy (DOE) Handbook, DOE-HDBK-1 078-94, Training Program Handbook: A Systematic Approach to Training, describes a systematic method for establishing and maintaining training programs. |
06/18/2014 |
DOE-HDBK-1081-2014 |
Primer on Spontaneous Heating and Pyrophoricity The purpose of this Primer is to provide an understanding of spontaneous heating and pyrophoricity hazards is necessary for DOE facility personnel to operate and maintain facilities and facility support systems in a safe manner. |
01/06/2015 |
DOE-HDBK-1092-2013 |
Electrical Safety Generally, the guidance contained in this Department of Energy (DOE) Handbook for Electrical Safety, DOE-HDBK-1092-2013, for implementing electrical safety at DOE facilities is based on well-developed industrial practices, mandatory rules, or nationally-recognized consensus codes or standards. The guidelines are written to be flexible, so that they encompass the range from large, permanent DOE test or production facilities to small research or testing facilities. These guidelines form a compendium of good practices and describe key elements of programs that support electrical safety at DOE facilities. |
07/25/2013 |
DOE-HDBK-1100-2004 |
Chemical Process Hazards Analysis The purpose of this handbook is to facilitate, within the DOE, the performance of chemical process hazards analyses (PrHAs) as required under the PSM Rule. It provides basic information for the performance of PrHAs, and should not be considered a complete resource on PrHA methods. Likewise, to determine if a facility is covered by the PSM rule, the reader should refer to the handbook, ""Process Safety Management for Highly Hazardous Chemicals"" (DOE-HDBK-1101-2004). |
08/04/2004 |
DOE-HDBK-1101-2004 |
Process Safety Management for Highly Hazardous Chemicals This handbook provides information necessary to determine if a chemical process is covered by the PSM Rule and provides an interpretation of the 14 elements of the PSM Rule. An overview of these elements is given in Table 1.1. This handbook also describes DOE programs that may, with or without modification, satisfy the requirements of this Rule. Questions and answers, based on OSHA's responses to questions from industry and labor, are provided at the end of most sections. |
07/26/2004 |
DOE-HDBK-1108-2002 |
Radiological Safety Training for Accelerator Facilities This non-mandatory Handbook describes a recommended implementation process for conducting the radiation safety training required by Title 10 Code of Federal Regulations Occupational Radiation Protection, (10 CFR 835) Subpart J and as outlined in the DOE standard DOE-STD-1098-99, Radiological Control (RCS). |
08/16/2013 |
DOE-HDBK-1110-2008 |
ALARA Training for Technical Support Personnel This Handbook describes a recommended implementation process for training as outlined in the DOE Radiological Control Standard (RadCon Standard). The Handbook is to assist those individuals within Department of Energy (DOE), Managing and Operating (M&O) contractors, and Managing and Integrating (M&I) contractors, identified as having responsibility for implementing the training recommended by the RadCon Standard. |
02/14/2008 |
DOE-HDBK-1118-99 |
Guide to Good Practices for Continuing Training This guide provides contractor training organizations with information and methods useful in the development and implementation of continuing training programs using a Systematic Approach to Training (SAT) process. |
01/09/2014 |
DOE-HDBK-1122-2009 |
Radiological Control Technician Training This Handbook describes an implementation process for core training as recommended in chapter 14 to Implementation Guide G441.1-1C , Radiation Protection Programs for Use with Title 10, Code of Federal Regulations, Part 835, Occupational Radiation Protection, and as outlined in the DOE standard, Radiological Control (RCS). The Handbook is meant to assist those individuals within the Department of Energy, Managing and Operating contractors, and Managing and Integrating contractors identified as having responsibility for implementing core training recommended by the RCS |
03/11/2009 |
DOE-HDBK-1130-2008 |
Radiological Worker (RW) Training This Handbook describes an implementation process for core training as recommended in chapter 14 to Implementation Guide G441.1-1B , Radiation Protection Programs for Use with Title 10, Code of Federal Regulations, Part 835, Occupational Radiation Protection, and as outlined in the DOE standard, Radiological Control (RCS). |
03/28/2013 |
DOE-HDBK-1131-2007 |
General Employee Radiological Training This handbook describes the DOE General Employee Radiological Training program. It includes standards and policies as well as recommendations for material development and program administration. It is intended for use by DOE contractors for the development of facility-specific general employee radiological training. |
02/14/2013 |
DOE-HDBK-1132-99 |
The Design Considerations Handbook includes information and suggestions for the design of systems typical to nuclear facilities, information specific to various types of special facilities, and information useful to various design disciplines. |
02/14/2014 |
DOE-HDBK-1139-2006 |
Chemical Management This non-mandatory Handbook is designed to assist Department of Energy (DOE) and contractor managers in assessing chemical hazard management and is approved for use by all DOE Components and their contractors. Examples of best practices needed to institute high-quality chemical management within the context of a site's Integrated Safety Management System (ISMS) are provided. |
06/15/2006 |
DOE-HDBK-1140-2001 |
Human Factors/Ergonomics Handbook for the Design for Ease of Maintenance - Table of Content and Chapter 1 The Handbook DOE-HDBK-1140-2001 Human Factors/Ergonomics Handbook for the Design for Ease of Maintenance has been separated into three sections for ease of downloading |
04/23/2001 |
DOE-HDBK-1145-2013 |
Radiological Safety Training for Plutonium Facilities This Handbook describes an implementation process for training as recommended in Implementation Guide G 441.1-1C, CH1, May 2008 and as outlined in DOE-STD-1098-2008, CN1, May 2009, Radiation Protection Programs Guide, DOE Radiological Control (the Radiological Control Standard – RCS). |
05/07/2013 |
DOE-HDBK-1163-2003 |
Integration of Multiple Hazard Analysis Requirements and Activities During Fiscal Year 2001, the joint DOE/EFCOG Chemical Safety Topical Committee (CSTC) formed a team consisting of representatives from several sites and DOE headquarters to evaluate possible methods for integrating hazard analysis activities with potential overlap such as radiological, chemical, emergency preparedness, environmental and others. The CSTC Team identified and reviewed hazard analysis requirements and issues, collected numerous sources of good practices information and evaluated possible methods for integrating hazard analysis activities. |
10/28/2003 |
DOE-HDBK-1169-2003 |
DOE Handbook Nuclear Air Cleaning Handbook This revision updates the information provided in ERDA 76-21 and incorporates current thinking as provided by manufacturers, subject matter experts from the DOE complex and members of the ASME Committee on Nuclear Air and Gas Treatment (ASME AG-1 Committee). Chapters have been added on History, Fire Protection, and Occupational Safety and Health. |
12/11/2003 |
DOE-HDBK-1208-2012 |
Accident Investigation and Prevention This handbook has been organized along a logical sequence of the application of the DOE “core analytical techniques” for conducting a DOE Federal-, or contractor-led Accident Investigation or an OSR in order to prevent accidents. The analysis techniques presented in this Handbook have been developed and informed from academic research and validated through industry application and practice. |
01/30/2013 |
DOE-HDBK-1209-2012 |
Access Handbook - Conducting Health Studies at Department of Energy The purpose of this handbook is to outline procedures that facilitate access to information needed for outside researchers conducting public health activities at Department of Energy (DOE) sites. The handbook is intended for use by these researchers conducting studies. |
09/27/2012 |
DOE-HDBK-1211-2014 |
Activity-Level Work Planning and Control Implementation This Handbook describes non-mandatory approaches for implementing Department of Energy (DOE) requirements for activity-level work planning and control (WP&C). |
06/02/2014 |
DOE-HDBK-1214-2014 |
Conduct of Operations Assessment Field Handbook This handbook is designed to assist in performing routine Conduct of Operations field observations (which include walkthroughs and tours), as well as provide basic guidance in preparing for a more formal assessment. |
08/01/2014 |
DOE-HDBK-1215-2014 |
Optimizing Radiation Protection of the Public and the Environment for use with DOE O 458.1, ALARA Requirements This Handbook addresses the development and use of a process to keep radiation exposures of the public and environment, and releases of radioactive material to the environment from DOE activities as low as reasonably achievable (ALARA), that is; an ALARA process to implement and comply with DOE O 458.1, Radiation Protection of the Public and the Environment. |
10/10/2014 |
DOE-HDBK-1216-2015 |
Environmental Radiological Effluent Monitoring and Environmental Surveillance The Department of Energy’s (DOE) radiation protection of the public and the environment is contained within DOE Order (O) 458.1, Radiation Protection of the Public and the Environment. This Handbook describes elements that may be used to implement the radiological effluent monitoring and environmental surveillance requirements in DOE O 458.1. |
03/19/2015 |
DOE-HDBK-1221-2016 |
Suspect/Counterfeit Items Resource Handbook This Handbook provides information to assist the Department of Energy (DOE) sites in preventing suspect/counterfeit (S/CI) items from entering the DOE complex. Specifically, it provides information on identifying, reporting, and dispositioning S/CIs. |
08/09/2016 |
DOE-HDBK-1223-2016 |
Classified Matter Protection and Control Handbook This handbook is not intended to replace DOE Order 471.6, Information Security, other departmental rules, plans or processes or national directives. This handbook describes one way to fulfill requirements for Classified Matter Protection and Control (CMPC) within DOE. |
09/13/2016 |
DOE-HDBK-3010-94 |
Airborne Release Fractions/Rates and Respirable Fractions for Nonreactor Nuclear Facilities The purpose of this document is to provide a compendium and analysis of experimental data from which airborne release fractions (ARFs) and respirable fractions (RFs) may be derived. Such values are needed to determine quantities of radioactive material driven airborne for the purpose of estimating the scope of the potential release spectrum and potential downwind consequences from a given facility or activity. |
07/26/1996 |
DOE-HDBK-3012-2015 |
Team Leader’s Good Practices For Readiness Reviews This Handbook provides instructions, explanations and examples for the performance of all phases of a Readiness Review (RR) to verify readiness to start or restart nuclear facilities, operations, and activities. |
11/24/2015 |
DOE-HDBK-3027-99 |
INTEGRATED SAFETY MANAGEMENT SYSTEMS (ISMS) VERIFICATION TEAM LEADER'S HANDBOOK This ISMS Verification Team Leader’s handbook has been developed to provide guidance to the ISMS verification Team Leader and the verification team. The Team Leader has a significant responsibility to ensure that the ISMS presented for review conforms to DOE regulations.Another purpose for this handbook is to provide recommended actions and procedures to help develop the skills and understanding necessary for effective membership on a verification team. |
06/09/1999 |
DOE-HDBK-6004-99 |
Supplementary Guidance and Design Experience for the Fusion Safety Standards DOE-STD-6002-96 and DOE-STD-6003-96 The first of these standards identifies requirements that subscribers to that standard must meet to achieve safety in fusion facilities. The second standard contains guidance to assist in meeting the requirements identified in the first. |
02/11/1999 |
DOE-HDBK-7251-2016 |
Fleet Management This Handbook addresses the life cycle management of motor vehicles (including passenger, special purpose, experimental, law enforcement), motor equipment and watercraft. |
09/29/2016 |
DOE-NA-STD-3016-2016 |
Hazard Analysis Reports for Nuclear Explosive Operations The purpose of this Technical Standard is to define requirements and guidance for preparing HARs for NEOs in accordance with 10 C.F.R. Part 830. |
09/06/2016 |
DOE-SPEC-1142-2001 |
Beryllium Lymphocyte Proliferation Testing This specification is for beryllium lymphocyte proliferation tests (BeLPT) used for detecting an individual’s sensitivity to beryllium and for clinical evaluation and diagnosis of patients for chronic beryllium disease. This specification should be used in all contracts with laboratories for the purchase of BeLPT Services. |
05/07/2001 |
DOE-STD-1020-2016 |
Natural Phenomena Hazards Analysis and Design Criteria for Department of Energy Facilities Department of Energy (DOE) Standard (STD) 1020-2016 has three purposes: Provide criteria and guidance for meeting the natural phenomena hazard (NPH) requirements of DOE Order (O) 420.1C, Chg. 1, Facility Safety; Ensure that structures, systems, and components (SSCs) in DOE facilities will perform assigned safety functions during and after design basis NPH events; and Provide requirements and guidance in the use of industry building codes and voluntary consensus standards in meeting NPH requirements. |
01/05/2017 |
DOE-STD-1025-2008 |
Weapons Quality Assurance Qualification Standard This technical FAQS identifies the minimum technical competency requirements for DOE Weapon Quality Assurance personnel. These positions are the Weapon Quality Assurance Specialist, and the Weapon Quality Assurance Engineer/Scientist. |
02/11/2009 |
DOE-STD-1026-2016 |
NNSA Package Certification Engineer Functional Area Qualification Standard The NNSA Package Certification Engineer Functional Area Qualification Standard (FAQS)establishes common functional area competency requirements for all NNSA Package Certification Engineers who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of NNSA packaging and transportation activities. |
05/19/2016 |
DOE-STD-1027-92 |
Hazard Categorization and Accident Analysis Techniques for Compliance with DOE Order 5480.23, Nuclear Safety Analysis Reports Change Notice No. 1 (September 1997) The purpose of this DOE Standard is to establish guidance for the preparation and review of hazard categorization and accident analyses techniques as required in DOE Order 5480.23, Nuclear Safety Analysis Reports. |
12/12/1997 |
DOE-STD-1030-96 |
Guide to Good Practices for Lockouts and Tagouts This Guide to Good Practices is written to enhance understanding of, and provide direction for, Lockouts and Tagouts, Chapter IX of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities |
07/26/1998 |
DOE-STD-1031-92 |
Guide to Good Practices for Communications This Guide to Good Practices is written to enhance understanding of, and provide direction for, Communications, Chapter IV of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. The practices in this guide should be considered when planning or reviewing communication programs. |
12/29/1998 |
DOE-STD-1032-92 |
Guide to Good Practices for Operations Organization and Administration This Guide to Good Practices is written to enhance understanding of, and provide direction for, Operations Organization and Administration, Chapter I of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. |
12/16/1998 |
DOE-STD-1033-92 |
Guide to Good Practices for Operations and Administration Updates Through Required Reading The purpose of this Guide to Good Practices is to provide Department of Energy (DOE) contractors with information that can be used to validate and/or modify existing programs relative to Conduct of Operations. |
12/17/1998 |
DOE-STD-1034-93 |
Guide to Good Practices for Timely Orders to Operators Change Notice No. 1 (December 1998) | Reaffirmed (2001) This Guide to Good Practices is written to enhance understanding of, and provide direction for, Timely Orders to Operators, Chapter XV of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. |
11/25/1998 |
DOE-STD-1035-93 |
Guide to Good Practices for Logkeeping This Guide to Good Practices is written to enhance understanding of, and provide direction for, Logkeeping, Chapter XI of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. |
12/15/1998 |
DOE-STD-1036-93 |
Guide to Good Practices for Independent Verification The purpose of this Guide to Good Practices is to provide Department of Energy (DOE) contractors with information that can be used to validate and/or modify existing programs relative to Conduct of Operations. |
11/23/1998 |
DOE-STD-1037-93 |
Guide to Good Practices for Operations Aspects of Unique Processes This Guide to Good Practices is written to enhance understanding of, and provide direction for, Operations Aspects of Facility Chemistry and Unique Processes, Chapter XIII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. |
12/15/1998 |
DOE-STD-1038-93 |
Guide to Good Practices for Operations Turnover This Guide to Good Practices is written to enhance understanding of, and provide directionn for, Operations Turnover, Chapter XII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. |
12/16/1998 |
DOE-STD-1039-93 |
Guide to Good Practices for Control of Equipment and System Status |
12/14/1998 |
DOE-STD-1040-93 |
Guide to Good Practices for Control of On-Shift Training This Guide to Good Practices is written to enhance understanding of, and provide direction for, Control of On-Shift Training, Chapter V of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. "Control of On-Shift Training" is an element of an effective Conduct of Operations program. |
12/31/1998 |
DOE-STD-1041-93 |
Guide to Good Practices for Shift Routines and Operating Practices This Guide to Good Practices is written to enhance understanding of, and provide direction for, “Shift Routines and Operating Practices,” Chapter II of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. “Shift Routines and Operating Practices” is an element of an effective Conduct of Operations program. |
01/11/1999 |
DOE-STD-1042-93 |
Guide to Good Practices for Control Area Activities This Guide to Good Practices is written to enhance understanding of, and provide direction for, “Control Area Activities,” Chapter III of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities.“Control Area Activities” is an element of an effective Conduct of Operations program. |
12/15/1998 |
DOE-STD-1043-93 |
Guide to Good Practices for Operator Aid Postings This Guide to Good Practices is written to enhance understanding of, and provide direction for, Operator Aid Postings, Chapter XVII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. |
12/14/1998 |
DOE-STD-1044-93 |
Guide to Good Practices for Equipment and Piping Labeling This Guide to Good Practices is written to enhance understanding of, and provide direction for, “Equipment and Piping Labeling,” Chapter XVIII of Department of Energy (DOE) Order 5480.19, Conduct of Operations Requirements for DOE Facilities. |
12/17/1998 |
DOE-STD-1045-93 |
Guide to Good Practices for Notifications and Investigation of Abnormal Events "Notifications" and "Investigation of Abnormal Events" are elements of an effective Conduct of Operations program. The complexity and array of activities performed in DOE facilities dictate the necessity for a coordinated notifications program and a consistent method for investigating abnormal events to promote safe and efficient operations. |
12/14/1998 |
DOE-STD-1047-2008 |
Safety Functions and Other Features of Remotely Operated Weapon Systems This standard summarizes safety functions and other features of Remotely Operated Weapon Systems (ROWS) requested most frequently by users and safety personnel at sites of the U.S. Department of Energy (including the National Nuclear Security Administration). These design features are intended to improve the safety, reliability, and ease of use of these systems; they may also improve the performance of these systems. |
09/03/2008 |
DOE-STD-1063-2011 |
Facility Representatives The purpose of the DOE FR Program is to ensure that competent DOE staff personnel are assigned to oversee the day-to-day contractor operations at DOE’s hazardous nuclear and non-nuclear facilities.Oversight performed by FRs provides DOE Line Managers with accurate, objective information on the effectiveness of contractor work performance and practices, including implementation of the integrated safety management system. |
04/18/2012 |
DOE-STD-1066-2016 |
Fire Protection The purpose of this Standard is to facilitate implementation of Department of Energy (DOE) Order (O), 420.1C, Facility Safety, by providing criteria and guidance for a standard and acceptable approach to meet the DOE O 420.1C requirements for fire protection programs (FPPs). This Standard addresses special or unique fire protection issues at DOE facilities that are not comprehensively or adequately addressed in national consensus standards or other design criteria. |
12/22/2016 |
DOE-STD-1070-94 |
Criteria for Evaluation of Nuclear Facility Training Programs The Criteria for Evaluation of Nuclear Facility Training Programs establishes objectives and criteria for evaluating nuclear facility training programs. |
07/22/2014 |
DOE-STD-1073-2016 |
Configuration Management This Standard provides the criteria and objectives for developing a configuration management (CM) process for design, construction, operation, and post-operation of a DOE facility or activity. It also includes examples and methods for achieving those criteria and objectives. The criteria and objectives presented in this Standard are based on industry practice and CM experience at DOE facilities. |
12/23/2016 |
DOE-STD-1083-2009 |
Processing Exemptions to Nuclear Safety Rules and Approval of Alternative Methods for Documented Safety Analyses DOE may grant temporary or permanent exemptions from its nuclear safety requirements in rules provided that the provisions of 10 C.F.R. Part 820, Subpart E, ""Exemption Relief,"" are met. The provisions of 10 C.F.R. Part 820 state that the Secretarial Officer (defined in 10 C.F.R. Part 820) shall utilize any procedures deemed necessary and appropriate to comply with the exemption responsibilities. This Standard establishes acceptable procedures that may be used to request and grant exemptions to DOE nuclear safety rules in accordance with 10 C.F.R. Part 820. |
08/14/2015 |
DOE-STD-1090-2011 |
Hoisting and Rigging (Formerly Hoisting and Rigging Manual) The U.S. Department of Energy (DOE) Hoisting and Rigging Standard is intended to be used by supervisors, line managers, safety personnel, equipment operators, riggers and other personnel responsible for the safety of hoisting and rigging operations at DOE sites. It may be used as either contract document or as a best practices guide at the site’s or program office’s discretion. |
09/30/2011 |
DOE-STD-1095-2011 |
Department of Energy Laboratory Accreditation Program for Personnel Dosimetry This technical standard describes the U.S. Department of Energy Laboratory Accreditation Program for external dosimetry, in support of worker health, safety, and security. DOELAP accreditation involves performance testing and documentation of program elements important to the long-term quality assurance of a dosimetry program and its ability to accurately measure, record, and report occupational whole body and extremity dose. |
02/15/2011 |
DOE-STD-1098-2008 |
Radiological Control The Department of Energy (DOE) has developed this Standard to assist line managers in meeting their responsibilities for |
06/16/2009 |
DOE-STD-1104-2016 |
Review and Approval of Nuclear Facility Safety Basis and Safety Design Basis Documents This Standard describes a framework and the criteria to be used for approval of (1) safety basis documents, as required by 10 Code of Federal Regulation (CFR) Part 830, Nuclear Safety Management, and (2) safety design basis documents, as required by Department of Energy (DOE) Standard (STD)-1189-2016, Integration of Safety into the Design Process. |
12/21/2016 |
DOE-STD-1107-97 |
Knowledge, Skills, and Abilities for Key Radiation Protection Positions at DOE Facilities This document provides detailed qualification criteria for contractor key radiation protection personnel. Although federal key radiation protection positions are also identified in Table 1, qualification standards for federal positions are provided in DOE O 360.1B, October 2001 and the DOE Technical Qualifications Program. |
11/08/2007 |
DOE-STD-1111-2013 |
Laboratory Accreditation Program Administration This technical standard provides a brief description of and an administrative framework for DOELAP activities, and establishes parameters for accreditation and other actions. Detailed information on addressing the requirements in this technical standard is provided in the DOELAP technical standards listed below and is explained further in the supplemental handbook. |
07/19/2013 |
DOE-STD-1112-2016 |
Laboratory Accreditation Program for Radiobioassay This technical standard describes the U.S. Department of Energy Laboratory Accreditation Program (DOELAP) for Radiobioassay, for use by the U.S. Department of Energy (DOE) and DOE Contractor radiobioassay programs. |
07/07/2016 |
DOE-STD-1120-2016 |
Preparation of Documented Safety Analysis for Decommissioning and Environmental Restoration Activities This Department of Energy (DOE) Standard (STD), DOE-STD-1120-2016, describes a methodology for preparing a Documented Safety Analysis (DSA) for decommissioning of hazard category (HC) 1, 2, or 3 nuclear facilities, as well as HC-2 or HC-3 environmental restoration (ER) activities that involve work not done within a permanent structure or the decommissioning of a facility with only low-level residual fixed radioactivity. |
03/15/2016 |
DOE-STD-1121-2008 |
Internal Dosimetry This standard lays out the essential elements of an internal dosimetry program. Information on bioassay, minimum detectable activity, whole body counting, biokinetic models, internal dosimetry calculations and computer codes are presented. |
11/14/2013 |
DOE-STD-1123-2009 |
Safeguards and Security General Technical Base Qualification Standard The Safeguards and Security General Technical Base Qualification Standard is intended to ensure that all safeguards and security employees in the TQP have a common level of core technical knowledge. The Safeguards and Security Functional Area Qualification Standard builds on this base knowledge to provide greater knowledge and skills. |
08/12/2009 |
DOE-STD-1128-2013 |
Good Practices for Occupational Radiological Protection in Plutonium Facilities This Technical Standard (TS) does not contain any new requirements. Its purpose is to provide information on good practices, update existing reference material, and discuss practical lessons learned relevant to the safe handling of plutonium. U.S. Department of Energy (DOE) health physicists may adapt the recommendations from this TS to similar situations throughout the DOE complex. |
04/25/2013 |
DOE-STD-1129-2015 |
Tritium Handling and Safe Storage This Standard provides useful information for establishing processes and procedures for the receipt, storage, assay, handling, packaging, and shipping of tritium and tritiated wastes. It includes discussions and advice on compliance‐based issues and adds insight to those areas in which DOE guidance is unclear. It is intended to be a “living document” that is revised periodically. |
09/16/2015 |
DOE-STD-1136-2009 |
Guide of Good Practices for Occupational Radiological Protection in Uranium Facilities This Technical Standard (TS) provides operational guidance, practical lessons learned and experience gained, guides to good practice, and reference information on the safe handling of uranium. |
08/11/2009 |
DOE-STD-1137-2014 |
Fire Protection Engineering Functional Area Qualification Standard The Fire Protection Engineering Functional Area Qualification Standard (FAQS) establishes common functional area competency requirements for Fire Protection Engineers. |
04/24/2014 |
DOE-STD-1138-2007 |
Industrial Hygiene Functional Area Qualification Standard The Industrial Hygiene FAQS establishes common functional area competency requirements for all DOE industrial hygiene personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
11/15/2007 |
DOE-STD-1146-2007 |
General Technical Base Qualification Technical Standard The General Technical Base Qualification Standard establishes common technical competency requirements for all DOE personnel who provide assistance,direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
03/25/2015 |
DOE-STD-1149-2016 |
Safety and Health Program for DOE Construction Projects This Standard provides a framework for a construction safety program for use on DOE construction projects that will comply with the requirements of title 10, Code of Federal Regulations, part 851 (10 CFR 851); DOE Order (O)440.1B, Worker Protection Program for DOE (Including the National Nuclear Security Administration) Federal Employees, and would be consistent with its accompanying Guide (G), DOE G 440.1‐1B, Worker Safety and Health Program for DOE (Including the National Nuclear Security Administration) Federal and Contractor Employees, and DOE Policy (P) 450.4A, Integrated Safety Management Policy. |
09/06/2016 |
DOE-STD-1150-2002 |
Quality Assurance Functional Area Qualification Standard This QA Functional Area Qualification Standard establishes common functional area competency requirements for DOE personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical QA activities impacting the safe operation of defense nuclear facilities. |
04/22/2002 |
DOE-STD-1150-2013 |
Quality Assurance Functional Area Qualification Standard The Quality Assurance (QA) Functional Area Qualification Standard (FAQS) establishes common functional area competency requirements for all DOE QA personnel who provide assistance, |
12/02/2013 |
DOE-STD-1151-2010 |
Facility Representative Functional Area Qualification Standard FACILITY REPRESENTATIVE DOE O 426.1, Federal Technical Capabilities, commits the Department to continuously strive for technical excellence. The Technical Qualification Program (TQP), along with the supporting technical qualification standards, complements the personnel processes that support the Department’s drive for technical excellence. |
10/12/2010 |
DOE-STD-1153-2002 |
A Graded Approach for Evaluating Radiation Doses to Aquatic and Terrestrial Biota This technical standard provides methods, models, and guidance within a graded approach that the U.S. Department of Energy (DOE) and its contractors may use to evaluate doses of ionizing radiation to populations of aquatic animals, terrestrial plants, and terrestrial animals from DOE activities for the purpose of demonstrating protection relative to Dose Rate Guidelines. |
08/14/2002 |
DOE-STD-1155-2002 |
Transportation and Traffic Management Functional Area Qualification The Office of Environmental Management is the Sponsor for the Transportation and Traffic Management Qualification Standard. The Sponsor is responsible for coordinating the development and/or review of the Functional Area Qualification Standard by subject matter experts to ensure that the technical content of the standard is accurate and adequate for Department-wide application for those involved in the Transportation and Traffic Management Program. |
04/05/2010 |
DOE-STD-1156-2011 |
Environmental Compliance Functional Area Qualification Standard The Environmental Compliance FAQS establishes common functional area competency requirements for all DOE environmental compliance personnel who provide assistance, or direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. The technical FAQS has been developed as a tool to assist DOE program and field offices in the development and implementation of the TQP in their organization. |
06/20/2011 |
DOE-STD-1157-2002 |
Environmental Restoration Functional Area Qualification Standard The Environmental Restoration Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of DOE’s most hazardous facilities. |
11/12/2002 |
DOE-STD-1158-2010 |
Self-Assessment Standard for DOE Contractor Criticality Safety Programs This document encompasses all elements of the Contractor Criticality Safety Program at DOE facilities. The effectiveness of the criticality safety program is dependent upon management implementing its roles and responsibilities to integrate criticality safety into work practices. This doc is an assessment tool. |
04/05/2010 |
DOE-STD-1159-2003 |
Waste Management Functional Area Qualification Standard The Waste Management Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities impacting the safe operation of DOE’s most hazardous facilities |
03/11/2003 |
DOE-STD-1160-2011 |
Occupational Safety Functional Area Qualification Standard The Occupational Safety technical functional area qualification standard (FAQS) establishes common functional area competency requirements for all DOE occupational safety personnel who provide assistance, or direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
07/05/2011 |
DOE-STD-1161-2008 |
Mechanical Systems Functional Area Qualification Standard The Mechanical Systems FAQS establishes common functional area competency requirements for all DOE mechanical systems personnel who provide assistance in, direction or guidance to, or oversight or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
07/03/2008 |
DOE-STD-1162-2013 |
Instrumentation and Control Functional Area Qualification Standard The primary purpose of the Technical Qualification Program (TQP) is to ensure employees have the requisite technical competency to support the mission of the Department. The TQP forms the basis for the development and assignment of DOE personnel responsible for ensuring the safe operation of defense nuclear facilities. |
07/19/2013 |
DOE-STD-1164-2003 |
Aviation Safety Officer, Functional Area Qualification Standard The Aviation Safety Officer FAQS establishes common functional area competency requirements for all DOE aviation safety personnel who provide assistance, or direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s facilities. |
01/20/2010 |
DOE-STD-1165-2003 |
Aviation Manager Functional Area Qualification Standard The Aviation Manager FAQS establishes common functional area competency requirements for all DOE Aviation Manager personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
12/09/2009 |
DOE-STD-1166-2003 |
Deactivation and Decommission Functional Area Qualification Standard The Deactivation and Decommissioning Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
10/07/2003 |
DOE-STD-1167-2003 |
Respiratory Acceptance Program for Supplied-Air Suits The supplied-air suits that protect DOE contractor and federal employees from exposure to harmful atmospheres and radioactive contaminants are not included in the National Institute for Occupational Safety and Health (NIOSH) certification process for respiratory protective devices. Therefore, with the awareness and acknowledgement of NIOSH and the Occupational Safety and Health Administration (OSHA), the Department established a system for acceptance testing of supplied-air suits. |
02/04/2004 |
DOE-STD-1168-2013 |
Confinement Ventilation and Process Gas Treatment Functional Area Qualification Standard The Confinement Ventilation and Process Gas Treatment Functional Area Qualification Standard establishes common functional area competency requirements for all DOE CV&PGT personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
10/11/2013 |
DOE-STD-1170-2007 |
Electrical Systems and Safety Oversight Functional Area Qualification Standard The Electrical Systems and Safety Oversight FAQS establishes general and specific functional area competency requirements for all DOE Electrical Systems and Safety Oversight personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities and, when appropriate, to other DOE facilities. |
08/02/2007 |
DOE-STD-1171-2009 |
Safeguard and Security Functional Area Standard The Safeguards and Security FAQS establishes common functional area competency requirements for all DOE safeguards and security personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safeguards and security operations of DOE’s defense nuclear facilities. |
06/04/2009 |
DOE-STD-1172-2011 |
Safety Software Quality Assurance Functional Area Qualification Standard This SSQA FAQS identifies the minimum technical competency requirements for DOE personnel who have a responsibility for safety software. Although there may be other competency requirements associated with the positions held by DOE personnel, this technical FAQS is limited to identifying the specific technical competencies required throughout all defense nuclear facilities. |
02/10/2011 |
DOE-STD-1173-2009 |
Criticality Safety Functional Areq Qualification Standard The Criticality Safety FAQS establishes common functional area competency requirements for DOE criticality safety personnel who provide assistance, or direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s nuclear facilities. |
06/04/2009 |
DOE-STD-1174-2003 |
Radiation Protection Functional Area Qualification Standard The Radiation Protection Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
01/13/2004 |
DOE-STD-1174-2013 |
Radiation Protection Functional Area Qualification Standard The Radiation Protection Functional Area Qualification Standard (FAQS) establishes common functional area competency requirements for all DOE Radiation Protection personnel who provide assistance, or direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
11/06/2013 |
DOE-STD-1175-2006 |
Senior Technical Safety Manager Functional Area Qualification Standard The Senior Technical Safety Manager, STSM, FAQS establishes common functional area competency requirements for all DOE STSMs who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
11/08/2006 |
DOE-STD-1175-2013 |
Senior Technical Safety Manager Functional Area Qualification Standard The STSM FAQS establishes common functional area competency requirements for all DOE STSMs who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
10/04/2013 |
DOE-STD-1176-2010 |
Chemical Processing Functional Area Qualification Standard The Chemical Processing FAQS establishes common functional area competency requirements for all DOE chemical processing personnel who provide assistance in, direction or guidance to, or oversight or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
02/04/2010 |
DOE-STD-1177-2004 |
Emergency Management Functional Area Qualification Standard The Emergency Management Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
01/21/2004 |
DOE-STD-1178-2004 |
Technical Program Manager Functional Area Qualification Standard The Technical Program Manager Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
02/09/2004 |
DOE-STD-1179-2004 |
Technical Training Functional Area Qualification Standard The Technical Training Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
02/25/2004 |
DOE-STD-1180-2004 |
Construction Management Functional Area Qualification Standard The Construction Management Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
03/03/2004 |
DOE-STD-1181-2014 |
Facility Maintenance Management Functional Area Qualification Standard The Facility Maintenance Management Functional Area Qualification Standard (FAQS) establishes common functional area competency requirements for all DOE Facility Maintenance Management personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
04/24/2014 |
DOE-STD-1182-2014 |
Civil/Structural Engineering Functional Area Qualification Standard The Civil/Structural Engineering Functional Area Qualification Standard establishes common functional area competency requirements for Department of Energy personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
09/30/2014 |
DOE-STD-1183-2016 |
Nuclear Safety Specialist Functional Area Qualification Standard The Nuclear Safety Specialist Functional Area Qualification Standard (FAQS) establishes common performance competencies for all DOE Nuclear Safety Specialist personnel who provide assistance, direction, guidance, oversight, or evaluation of contractor technical activities that could impact the safe operation of DOE’s defense nuclear facilities. |
10/20/2016 |
DOE-STD-1185-2007 |
Nuclear Explosive Safety Study Functional Area Qualification Standard A Nuclear Explosive Safety Study (NESS) is performed on all DOE Nuclear Explosive Operations (NEOs) in accordance with DOE O 452.1D, Nuclear Explosive and Weapon Surety Program; DOE O 452.2D, Nuclear Explosive Safety; and DOE M 452.2-2, Nuclear Explosive Safety Evaluation Processes. |
05/27/2010 |
DOE-STD-1186-2016 |
Specific Administrative Controls This Standard provides requirements and guidance on acceptable methods for developing and implementing Specific Administrative Controls (SACs) at nuclear facilities operated by the Department of Energy (DOE). |
12/16/2016 |
DOE-STD-1187-2007 |
Beryllium-Associated Worker Registry Data Collection and Management Guidance This standard provides acceptable methods for compliance with the requirements of Title 10 Code of Federal Regulations, Part 850.39 (10 CFR 850.39) “Recordkeeping and Use of Information.” It should be used by responsible employers subject to the requirements of 10 CFR 850 “Chronic Beryllium Disease Prevention Program” to guide their submission of information to the Department of Energy (DOE) Beryllium-Associated Worker Registry. |
06/27/2007 |
DOE-STD-1189-2016 |
Integration Of Safety Into the Design Process This Standard (STD) provides requirements and guidance for the integration of safety into the design process for Department of Energy (DOE) Hazard Category (HC) 1, 2, and 3 nuclear facilities as defined in 10 Code of Federal Regulations (CFR) Part 830, Nuclear Safety Management. This Standard specifies the requirements and responsibilities for project management, engineering/design, and safety analysis, and their interactions essential for successful integration of safety into design and construction. The Standard also specifies the engineering and design process, as well as key interfaces required for the integration of safety into design. |
12/22/2016 |
DOE-STD-1190-2007 |
Illness and Injury Surveillance Program Guidelines This standard provides recommended guidelines for the performance of Illness and Injury Surveillance by occupational medicine programs at Department of Energy (DOE)-owned and operated sites and at DOE-owned, contractor-operated sites regulated by the Atomic Energy Act, Energy Reorganization Act of 1974, and Department of Energy Organization Act, 1977. |
03/23/2007 |
DOE-STD-1192-2010 |
Vulnerability Assessment Standard OUO Statement This Technical Standard must be handled as Official Use Only (OUO); thus will not be available on the Technical Standards Program website. |
03/03/2010 |
DOE-STD-1193-2010 |
Safety Functions and Other Features of Lethal Activated Denial Systems This standard establishes the minimum safety functions and features of lethal activated denial systems necessary for authorized deployment at U.S. Department of Energy sites, including the National Nuclear Security Administration facilities. |
04/29/2010 |
DOE-STD-1194-2011 |
Nuclear Materials Control and Accountability This document describes establishing and maintaining a Material Control and Accountability (MC&A) program, where each MC&A program element is a part of a quality MC&A program. |
10/02/2013 |
DOE-STD-1195-2011 |
Design of Safety Significant Safety Instrumented Systems Used at DOE Non-Reactor Nuclear Facilities This standard provides requirements and guidance for the design, procurement, installation, testing, maintenance, operation, and quality assurance of safety instrumented systems (SIS) that may be used at Department of Energy (DOE) nonreactor nuclear facilities for safety significant (SS) functions. |
05/05/2011 |
DOE-STD-1196-2011 |
Concentration Technical Standard This standard supports the implementation of Department of Energy (DOE) Order 458.1, Radiation Protection of the Public and the Environment. It also establishes the numerical values of DCSs in a manner reflecting the current state of knowledge and practice in radiation protection |
05/05/2011 |
DOE-STD-1197-2011 |
Occurrence Reporting Causal Analysis The purpose of causal analysis is to identify and understand the causes (both individual and organizational) that contributed to an occurrence in order to correct deficiencies. DOE O 232.2, Occurrence Reporting and Processing of Operations Information, requires the investigation and analysis of occurrences. Pursuant to DOE O 232.2, causal analyses of occurrences and near misses must go beneath the surface to identify how the underlying sources of operational vulnerability combined to produce unintended or undesired results. |
10/17/2011 |
DOE-STD-1207-2012 |
Protection Programming Defensive Planning for Fixed Facilities This document provides Department of Energy (DOE) field offices and associated facilities/sites with a standard methodology for adapting the Department’s tactical doctrine to site-specific needs in a coherent, consistent, and repeatable fashion. |
09/17/2015 |
DOE-STD-1210-2012 |
Incidents of Security Concern This Technical Standard describes establishing and maintaining a quality incident of security concern (IOSC) program. Each site/facility establishes an IOSC program to ensure that the occurrence of a security incident prompts the appropriate graded response including an assessment of the potential impacts, appropriate notifications/reporting, extent of condition, and corrective actions. |
10/01/2012 |
DOE-STD-1212-2012 |
Explosives Safety The Standard provides the basic technical requirements for an explosives safety program necessary for operations involving explosives, explosives assemblies, pyrotechnics and propellants, and assemblies containing these materials. |
06/27/2012 |
DOE-STD-1213-2014 |
Protective Force Contingency Planning Technical Standard This Technical Standard outlines the responsibilities, planning considerations, training,management oversight, and other activities related to establishment of a Contingency Protective Force. |
09/17/2015 |
DOE-STD-1217-2016 |
Safeguards and Security Survey and Self-Assessment Planning, Conduct, and Reporting This document provides the Department of Energy (DOE) with a standard methodology for adapting the Department’s requirements for Safeguards and Security (S&S) surveys and self-assessments to organization-specific needs in a coherent, consistent, and repeatable fashion. It describes a consistent and acceptable approach to planning, conducting, and reporting the results for S&S surveys and self-assessments. |
02/24/2016 |
DOE-STD-1219-2016 |
Analysis and Evaluation of the Operability and Reliability of the Intrusion Detection and Assessment Systems This standard provides an understandable process and methodology of the analysis and evaluation sites should consider conducting as required by Department of Energy (DOE) Order (O) 473.3A, Attachment 3, Section A, Chapter IX, 1.i.(1). In addition, the intent of this standard addresses the protective force equipment needs as outlined by DOE O 473.3A Appendix A, Section C, 2. Equipment and Attachment 2, Section C.3. Equipment. |
05/13/2016 |
DOE-STD-1628-2013 |
Development of Probabilistic Risk Assessments for Nuclear Safety Applications This document is the DOE Technical Standard entitled, “Development of Probabilistic Risk Assessments for Nuclear Safety Applications”. |
11/04/2013 |
DOE-STD-3006-2010 |
Planning and Conducting Readiness Reviews This Standard provides standardized methods and approaches for planning and conducting RRs. This Standard also provides guidance for preparation of exemption requests in accordance with DOE O 251.1C. DOE O 425.1D requirements for RRs apply both to responsible contractors and to DOE |
05/06/2010 |
DOE-STD-3007-2007 |
Guidelines for Preparing Criticality Safety Evaluations at Department of Energy Non-Reactor Nuclear Facilities This standard provides a framework for generating Criticality Safety Evaluations (CSE) supporting fissionable material operations at Department of Energy (DOE) nonreactor nuclear facilities. This standard imposes no new criticality safety analysis requirements. |
02/07/2007 |
DOE-STD-3009-2014 |
Preparation Of Nonreactor Nuclear Facility Documented Safety Analysis This Department of Energy (DOE) Standard (STD), DOE-STD-3009-2014, describes a method for preparing a Documented Safety Analysis (DSA) that is acceptable to DOE for nonreactor nuclear facilities. |
11/12/2014 |
DOE-STD-3011-2016 |
Preparation of documented Safety Analysis for interim operations at DOE nuclear Facilities This Department of Energy (DOE) Standard (STD), DOE-STD-3011-2016, describes a method for preparing a Documented Safety Analysis (DSA) for interim operations that is acceptable to DOE for hazard category (HC) 1, 2, or 3 nuclear facilities as set forth in Table 2 of Appendix A to Title 10 of the Code of Federal Regulations (C.F.R.) Part 830, Nuclear Safety Management, Subpart B, Safety Basis Requirements. |
01/22/2016 |
DOE-STD-3013-2012 |
Stabilization, Packaging, and Storage of Plutonium-Bearing Materials This Standard provides criteria for stabilization of plutonium-bearing materials at DOE facilities to safe and stable forms and packaging for storage with minimal surveillance for up to 50 years. |
03/01/2012 |
DOE-STD-3014-2006 |
Accident Analysis for Aircraft Crash into Hazardous Facilities This standard provides the user with sufficient information to evaluate and assess the significance of aircraft crash risk on facility safety without expending excessive effort where it is not required. |
10/29/2006 |
DOE-STD-3020-2015 |
Specification for HEPA Filters Used by DOE Contractors The purpose of this standard is to establish specifications and quality assurance (QA) requirements for the procurement, packaging, shipping and storage of high efficiency particulate air (HEPA) filters. |
06/23/2015 |
DOE-STD-3024-2011 |
Content of System Design Descriptions This Standard provides criteria and guidance for the technical content and organizational structure of system design descriptions (SDDs) at Department of Energy (DOE) facilities. This Standard should be used to develop an SDD for all active safety class (SC) and safety significant (SS) systems for nuclear facilities |
08/22/2005 |
DOE-STD-3025-2007 |
Quality Assurance Inspection and Testing of HEPA Filters This standard establishes essential elements of a Department of Energy (DOE) program for quality assurance and performance testing of High Efficiency Particulate Air (HEPA) filters to be installed in DOE Nuclear facilities that fall within the scope DOE-STD-3020. |
02/12/2007 |
DOE-STD-3028-2000 |
Criteria for Packaging and Storing Uranium-233-Bearing Materials This Standard establishes the criteria for the packaging and safe storage of separated 233 Ubearing materials. Materials conforming to these criteria should be capable of being contained and stored safely for a nominal 50 years (pending disposition). It aims to obviate subsequent repackaging during their continuing storage until their respective dispositions are identified. |
06/29/2000 |
DOE-STD-4001-2000 |
Design Criteria Standard for Electronic Records Management Software Applications This Standard establishes the recommended method for meeting the functional requirements of the laws and regulations pertaining to managing records using Electronic Records Management Application (RMA) software. |
04/25/2000 |
DOE-STD-5506-2007 |
Preparation of Safety Basis Documents for Transuranic The DOE is responsible for the safe handling, packaging and ultimate disposal of TRU wastes at the Waste Isolation Pilot Plant (WIPP) located near Carlsbad, New Mexico. Much of this waste, which is a result of legacy operations supporting the U.S. nuclear weapons mission, is now stored at numerous DOE sites located across the United States. |
05/15/2007 |
DOE-STD-5507-2013 |
Standard for Communicating Waste Characterization and DOT Hazard Classification Requirements for Low Specific Activity Materials and Surface Contaminated Objects Although other types of radioactive material and waste may be candidate LSA material or SCO, this standard focuses solely on low-level waste (LLW)3. The DOE ships various types of radioactive waste stemming from current and historical operations. Generally, candidate LSA material and SCO within the DOE complex are wastes generated from the clean-up and deactivation of World War II and Cold War era nuclear processing and weapons support operations. These waste matrices can be complex. The level of effort required to characterize waste varies based on the type and origin of waste being generated. |
04/04/2013 |
DOE-STD-6002-96 |
Safety of Magnetic Fusion Facilities: Requirements This Standard identifies safety requirements for magnetic fusion facilities. Also, safety principles are established to provide a framework within which the requirements can be implemented to build safety into fusion facility design and operations. |
08/11/2005 |
DOE-STD-6003-96 |
Safety of Magnetic Fusion Facilities: Guidance This document provides guidance for the implementation of the requirements identified in DOE-STD-6002-96, Safety of Magnetic Fusion Facilities: Requirements. This guidance is intended for the managers, designers, operators, and other personnel with safety responsibilities for facilities designated as magnetic fusion facilities. |
05/23/1996 |
DOE-STD-6004-2016 |
Clearance and Release of Personal Property From Accelerator Facilities The purpose of this Standard is to provide Department of Energy (DOE) accelerator facilities or modules thereof an acceptable approach for managing and dispositioning personal property that may be radiologically impacted (mainly by activation) by accelerator operations. This Standard facilitates implementation of requirements in DOE Order 458.1 Radiation Protection of the Public and the Environment (hereafter O458.1 or the Order) [DOE2013], by providing criteria and guidance for DOE accelerator facilities to develop and implement site-specific programs (including management, technical, and operational aspects) for the radiological clearance and release of personal property. |
05/19/2016 |
DOE-STD-7501-99 |
The DOE Corporate Lessons Learned Programs This technical standard provides management expectations and a framework for the DOE Corporate Lessons Learned Program. The framework is intended to support development and implementation of a DOE-wide lessons learned infrastructure |
01/20/2000 |