1. Introduction
This section is not normative.
This document introduces new CSS features to enable implicit transitions, which describe how CSS properties can be made to change smoothly from one value to another over a given duration.
2. Transitions
Normally when the value of a CSS property changes, the rendered result is instantly updated, with the affected elements immediately changing from the old property value to the new property value. This section describes a way to specify transitions using new CSS properties. These properties are used to animate smoothly from the old state to the new state over time.
For example, suppose that transitions of one second have been defined on the left and background-color properties. The following diagram illustrates the effect of updating those properties on an element, in this case moving it to the right and changing the background from red to blue. This assumes other transition parameters still have their default values.
![](transition1.png)
Transitions of left and background-color
Transitions are a presentational effect. The computed value of a property transitions over time from the old value to the new value. Therefore if a script queries the computed value of a property (or other data depending on it) as it is transitioning, it will see an intermediate value that represents the current animated value of the property.
Only animatable CSS properties can be transitioned. See the table at the end of this document for a list of properties that are animatable.
The transition for a property is defined using a number of new properties. For example:
div { transition-property: opacity; transition-duration: 2s; }The above example defines a transition on the opacity property that, when a new value is assigned to it, will cause a smooth change between the old value and the new value over a period of two seconds.
Each of the transition properties accepts a comma-separated list, allowing multiple transitions to be defined, each acting on a different property. In this case, the individual transitions take their parameters from the same index in all the lists. For example:
div { transition-property: opacity, left; transition-duration: 2s, 4s; }This will cause the opacity property to transition over a period of two seconds and the left property to transition over a period of four seconds.
In the case where the lists of values in transition properties do not have the same length, the length of the transition-property list determines the number of items in each list examined when starting transitions. The lists are matched up from the first value: excess values at the end are not used. If one of the other properties doesn’t have enough comma-separated values to match the number of values of transition-property, the UA must calculate its used value by repeating the list of values until there are enough. This truncation or repetition does not affect the computed value. Note: This is analogous to the behavior of the background-* properties, with background-image analogous to transition-property.
div { transition-property: opacity, left, top, width; transition-duration: 2s, 1s; }The above example defines a transition on the opacity property of 2 seconds duration, a transition on the left property of 1 second duration, a transition on the top property of 2 seconds duration and a transition on the width property of 1 second duration.
While authors can use transitions to create dynamically changing content, dynamically changing content can lead to seizures in some users. For information on how to avoid content that can lead to seizures, see Guideline 2.3: Seizures: Do not design content in a way that is known to cause seizures ([WCAG20]).
2.1. The transition-property Property
The transition-property property specifies the name of the CSS property to which the transition is applied.
Name: | transition-property |
---|---|
Value: | none | <single-transition-property> # |
Initial: | all |
Applies to: | all elements, ::before and ::after pseudo elements |
Inherited: | no |
Percentages: | N/A |
Media: | visual |
Computed value: | Same as specified value. |
Canonical order: | per grammar |
Animatable: | no |
A value of none means that no property will transition. Otherwise, a list of properties to be transitioned, or the keyword all which indicates that all properties are to be transitioned, is given.
If one of the identifiers listed is not a recognized property name or is not an animatable property, the implementation must still start transitions on the animatable properties in the list using the duration, delay, and timing function at their respective indices in the lists for transition-duration, transition-delay, and transition-timing-function. In other words, unrecognized or non-animatable properties must be kept in the list to preserve the matching of indices.
The <custom-ident> production in <single-transition-property> also excludes the keyword none, in addition to the keywords always excluded from <custom-ident>. This means that none, inherit, and initial are not permitted as items within a list of more that one identifier; any list that uses them is syntactically invalid.
For the keyword all, or if one of the identifiers listed is a shorthand property, implementations must start transitions for any of its longhand sub-properties that are animatable (or, for all, all animatable properties), using the duration, delay, and timing function at the index corresponding to the shorthand.
If a property is specified multiple times in the value of transition-property (either on its own, via a shorthand that contains it, or via the all value), then the transition that starts uses the duration, delay, and timing function at the index corresponding to the last item in the value of transition-property that calls for animating that property.
Note: The all value and all shorthand property work in similar ways, so the all value is just like a shorthand that covers all properties.
2.2. The transition-duration Property
The transition-duration property defines the length of time that a transition takes.
Name: | transition-duration |
---|---|
Value: | <time> # |
Initial: | 0s |
Applies to: | all elements, ::before and ::after pseudo elements |
Inherited: | no |
Percentages: | N/A |
Media: | interactive |
Computed value: | Same as specified value. |
Canonical order: | per grammar |
Animatable: | no |
This property specifies how long the transition from the old value to the new value should take. By default the value is 0s, meaning that the transition is immediate (i.e. there will be no animation). A negative value for transition-duration renders the declaration invalid.
2.3. The transition-timing-function Property
The transition-timing-function property describes how the intermediate values used during a transition will be calculated. It allows for a transition to change speed over its duration. These effects are commonly called easing functions.
Timing functions are defined in the separate CSS Timing Functions module [css-timing]. The input progress value used is the percentage of the transition duration, and the output progress value is used as the p value when applying the interpolation rules for the value type.
Name: | transition-timing-function |
---|---|
Value: | <single-timing-function> # |
Initial: | ease |
Applies to: | all elements, ::before and ::after pseudo elements |
Inherited: | no |
Percentages: | N/A |
Media: | interactive |
Computed value: | Same as specified value. |
Canonical order: | per grammar |
Animatable: | no |
2.4. The transition-delay Property
The transition-delay property defines when the transition will start. It allows a transition to begin execution some some period of time from when it is applied. A transition-delay value of 0s means the transition will execute as soon as the property is changed. Otherwise, the value specifies an offset from the moment the property is changed, and the transition will delay execution by that offset.
If the value for transition-delay is a negative time offset then the transition will execute the moment the property is changed, but will appear to have begun execution at the specified offset. That is, the transition will appear to begin part-way through its play cycle. In the case where a transition has implied starting values and a negative transition-delay, the starting values are taken from the moment the property is changed.
Name: | transition-delay |
---|---|
Value: | <time> # |
Initial: | 0s |
Applies to: | all elements, ::before and ::after pseudo elements |
Inherited: | no |
Percentages: | N/A |
Media: | interactive |
Computed value: | Same as specified value. |
Canonical order: | per grammar |
Animatable: | no |
2.5. The transition Shorthand Property
The transition shorthand property combines the four properties described above into a single property.
Name: | transition |
---|---|
Value: | <single-transition> # |
Initial: | see individual properties |
Applies to: | all elements, ::before and ::after pseudo elements |
Inherited: | no |
Percentages: | N/A |
Media: | interactive |
Computed value: | see individual properties |
Canonical order: | per grammar |
Animatable: | no |
Note that order is important within the items in this property: the first value that can be parsed as a time is assigned to the transition-duration, and the second value that can be parsed as a time is assigned to transition-delay.
If there is more than one <single-transition> in the shorthand, and any of the transitions has none as the <single-transition-property>, then the declaration is invalid.
3. Starting of transitions
Implementations must maintain a set of running transitions, each of which applies to a specific element and non-shorthand property. Each of these transitions also has a start time, end time, start value, end value, reversing-adjusted start value, and reversing shortening factor. Transitions are added to this set as described in this section, and are removed from this set when they complete or when implementations are required to cancel them. For the rationale behind the reversing-adjusted start value and reversing shortening factor, see §3.1 Faster reversing of interrupted transitions.
Implementations must also maintain a set of completed transitions, each of which (like running transitions) applies to a specific element and non-shorthand property. This specification maintains the invariant that there is never both a running transition and a completed transition for the same property and element.
If an element is no longer in the document, implementations must cancel any running transitions on it and remove transitions on it from the completed transitions.
This set of completed transitions needs to be maintained in order to prevent transitions from repeating themselves in certain cases, i.e., to maintain the invariant that this specification tries to maintain that unrelated style changes do not trigger transitions.
An example where maintaining the set of completed transitions is necessary would be a transition on an inherited property, where the parent specifies a transition of that property for a longer duration (say, transition: 4s text-indent) and a child element that inherits the parent’s value specifies a transition of the same property for a shorter duration (say, transition: 1s text-indent). Without the maintenance of this set of completed transitions, implementations could start additional transitions on the child after the initial 1 second transition on the child completes.
Various things can cause the computed values of properties on an element to change. These include insertion and removal of elements from the document tree (which both changes whether those elements have computed values and can change the styles of other elements through selector matching), changes to the document tree that cause changes to which selectors match elements, changes to style sheets or style attributes, and other things. This specification does not define when computed values are updated, beyond saying that implementations must not use, present, or display something resulting from the CSS cascading, value computation, and inheritance process [CSS3CASCADE] without updating the computed value (which means merely that implementations cannot avoid meeting requirements of this specification by claiming not to have updated the computed value as part of handling a style change). However, when an implementation updates the computed value of a property on an element to reflect one of these changes, or computes the computed value of a property on an element newly added to the document, it must update the computed value for all properties and elements to reflect all of these changes at the same time (or at least it must be undetectable that it was done at a different time). This processing of a set of simultaneous style changes is called a style change event. (Implementations typically have a style change event to correspond with their desired screen refresh rate, and when up-to-date computed style or layout information is needed for a script API that depends on it.)
Since this specification does not define when a style change event occurs, and thus what changes to computed values are considered simultaneous, authors should be aware that changing any of the transition properties a small amount of time after making a change that might transition can result in behavior that varies between implementations, since the changes might be considered simultaneous in some implementations but not others.
When a style change event occurs, implementations must start transitions based on the computed values that changed in that event. If an element is not in the document during that style change even or was not in the document during the previous style change event, then transitions are not started for that element in that style change event. Otherwise, define the before-change style as the computed values of all properties on the element as of the previous style change event, except with any styles derived from declarative animations such as CSS Transitions, CSS Animations ([CSS3-ANIMATIONS]), and SMIL Animations ([SMIL-ANIMATION], [SVG11]) updated to the current time. Likewise, define the after-change style as the computed values of all properties on the element based on the information known at the start of that style change event, but excluding any styles from CSS Transitions in the computation, and inheriting from the after-change style of the parent.
Note that this definition of the after-change style means that a single change can start a transition on the same property on both an ancestor element and its descendant element. This can happen when a property change is inherited from one element with transition-* properties that say to animate the changing property to another element with transition-* properties that also say to animate the changing property.
When this happens, both transitions will run, and the transition on the descendant will override the transition on the ancestor because of the normal CSS cascading and inheritance rules ([CSS3CASCADE]).
If the transition on the descendant completes before the transition on the ancestor, the descendant will then resume inheriting the (still transitioning) value from its parent. This effect is likely not a desirable effect, but it is essentially doing what the author asked for.
For each element with a before-change style and an after-change style, and each property (other than shorthands), define the matching transition-property value as the last value in the transition-property in the element’s after-change style that matches the property, as described in §2.1 The transition-property Property. If there is such a value, then corresponding to it, there is a matching transition duration, a matching transition delay, and a matching transition timing function in the values in the after-change style of transition-duration, transition-delay, and transition-timing-function (see the rules on matching lists). Define the combined duration of the transition as the sum of max(matching transition duration, 0s) and the matching transition delay. For each element and property, the implementation must act as follows:
-
If all of the following are true:
- the element does not have a running transition for the property,
- the before-change style is different from and can be interpolated with the after-change style for that property,
- the element does not have a completed transition for the property or the end value of the completed transition is different from the after-change style for the property,
- there is a matching transition-property value, and
- the combined duration is greater than 0s,
- start time is the time of the style change event plus the matching transition delay,
- end time is the start time plus the matching transition duration,
- start value is the value of the transitioning property in the before-change style,
- end value is the value of the transitioning property in the after-change style,
- reversing-adjusted start value is the same as the start value, and
- reversing shortening factor is 1.
- Otherwise, if the element has a completed transition for the property and the end value of the completed transition is different from the after-change style for the property, then implementations must remove the completed transition from the set of completed transitions.
- If the element has a running transition or completed transition for the property, and there is not a matching transition-property value, then implementations must cancel the running transition or remove the completed transition from the set of completed transitions.
-
If the element has a running transition for the property,
there is a matching transition-property value,
and the end value of the running transition is not equal to the value of the property in the after-change style, then:
- If the current value of the property in the running transition is equal to the value of the property in the after-change style, or if these two values cannot be interpolated, then implementations must cancel the running transition.
- Otherwise, if the combined duration is less than or equal to 0s, or if the current value of the property in the running transition cannot be interpolated with the value of the property in the after-change style, then implementations must cancel the running transition.
-
Otherwise, if the reversing-adjusted start value of the running transition is the same as the value of
the property in the after-change style (see the section on reversing of
transitions for why these case exists),
implementations must cancel the running transition and
start a new transition whose:
- reversing-adjusted start value is the end value of the running transition (Note: This represents the logical start state of the transition, and allows some calculations to ignore that the transition started before that state was reached, which in turn allows repeated reversals of the same transition to work correctly),
-
reversing shortening factor is the absolute value, clamped to the range [0, 1],
of the sum of:
- the output of the timing function of the old transition at the time of the style change event, times the reversing shortening factor of the old transition
- 1 minus the reversing shortening factor of the old transition.
-
start time is
the time of the style change event plus:
- if the matching transition delay is nonnegative, the matching transition delay, or
- if the matching transition delay is negative, the product of the new transition’s reversing shortening factor and the matching transition delay,
- end time is the start time plus the product of the matching transition duration and the new transition’s reversing shortening factor,
- start value is the current value of the property in the running transition,
- end value is the value of the property in the after-change style,
-
Otherwise, implementations must cancel the running transition and start a new transition whose:
- start time is the time of the style change event plus the matching transition delay,
- end time is the start time plus the matching transition duration,
- start value is the current value of the property in the running transition,
- end value is the value of the property in the after-change style,
- reversing-adjusted start value is the same as the start value, and
- reversing shortening factor is 1.
Note that the above rules mean that when the computed value of an animatable property changes, the transitions that start are based on the values of the transition-property, transition-duration, transition-timing-function, and transition-delay properties at the time the animatable property would first have its new computed value. This means that when one of these transition-* properties changes at the same time as a property whose change might transition, it is the new values of the transition-* properties that control the transition.
This provides a way for authors to specify different values of the transition-* properties for the “forward” and “reverse” transitions, when the transitions are between two states (but see below for special reversing behavior when an incomplete transition is interrupted). Authors can specify the value of transition-duration, transition-timing-function, or transition-delay in the same rule where they specify the value that triggers the transition, or can change these properties at the same time as they change the property that triggers the transition. Since it’s the new values of these transition-* properties that affect the transition, these values will be used for the transitions to the associated transitioning values. For example:
li { transition: background-color linear 1s; background: blue; } li:hover { background-color: green; transition-duration: 2s; /* applies to the transition *to* the :hover state */ }
When a list item with these style rules enters the :hover state, the computed transition-duration at the time that background-color would have its new value (green) is 2s, so the transition from blue to green takes 2 seconds. However, when the list item leaves the :hover state, the transition from green to blue takes 1 second.
Note that once the transition of a property has started (including being in its delay phase), it continues running based on the original timing function, duration, and delay, even if the transition-timing-function, transition-duration, or transition-delay property changes before the transition is complete. However, if the transition-property property changes such that the transition would not have started, the transition stops (and the property immediately changes to its final value).
Note that above rules mean that transitions do not start when the computed value of a property changes as a result of declarative animation (as opposed to scripted animation). This happens because the before-change style includes up-to-date style for declarative animations.
3.1. Faster reversing of interrupted transitions
Many common transitions effects involve transitions between two states, such as the transition that occurs when the mouse pointer moves over a user interface element, and then later moves out of that element. With these effects, it is common for a running transition to be interrupted before it completes, and the property reset to the starting value of that transition. An example is a hover effect on an element, where a transition starts when the pointer enters the element, and then the pointer exits the element before the effect has completed. If the outgoing and incoming transitions are executed using their specified durations and timing functions, the resulting effect can be distractingly asymmetric because the second transition takes the full specified time to move a shortened distance. Instead, this specification makes second transition shorter.
The mechanism the above rules use to cause this involves the reversing shortening factor and the reversing-adjusted start value. In particular, the reversing behavior is present whenever the reversing shortening factor is less than 1.
Note that these rules do not fully address the problem for transition patterns that involve more than two states.
Note that these rules lead to the entire timing function of the new transition being used, rather than jumping into the middle of a timing function, which can create a jarring effect.
This was one of several possibilities that was considered by the working group. See the reversing demo demonstrating a number of them, leading to a working group resolution made on 2013-06-07 and edits made on 2013-11-11.
4. Application of transitions
When a property on an element is undergoing a transition (that is, when or after the transition has started and before the end time of the transition) the transition adds a style called the current value to the CSS cascade at the level defined for CSS Transitions in [CSS3CASCADE].
Note that this means that computed values resulting from CSS transitions can inherit to descendants just like any other computed values. In the normal case, this means that a transition of an inherited property applies to descendant elements just as an author would expect.
Implementations must add this value to the cascade if and only if that property is not currently undergoing a CSS Animation ([CSS3-ANIMATIONS]) on the same element.
Note that this behavior of transitions not applying to the cascade when an animation on the same element and property is running does not affect whether the transition has started or ended. APIs that detect whether transitions are running (such as transition events) still report that a transition is running.
If the current time is at or before the start time of the transition (that is, during the delay phase of the transition), the current value is a specified style that will compute to the start value of the transition.
If the current time is after the start time of the transition (that is, during the duration phase of the transition), the current value is a specified style that will compute to the result of interpolating the property using the start value of the transition as Vstart, using the end value of the transition as Vend, and using (current time - start time) / (end time - start time) as the input to the timing function.
5. Completion of transitions
Running transitions complete at a time that equal to or after their end time, but prior to to the first style change event whose time is equal to or after their end time. When a transition completes, implementations must move all transitions that complete at that time from the set of running transitions to the set of completed transitions and then fire the events for those completions. (Note that doing otherwise, that is, firing some of the events before doing all of the moving from running transitions to completed transitions, could allow a style change event to happen without the necessary transitions completing, since firing the event could cause a style change event, if an event handler requests up-to-date computed style or layout data.)
6. Transition Events
The creation, beginning, completion, and cancellation of CSS transitions generate corresponding DOM Events. An event is dispatched to the element for each property that undergoes a transition on that element. This allows a content developer to perform actions that synchronize with changes to transitions.
Each event provides the name of the property the transition is associated with as well as the duration of the transition.
6.1. Interface TransitionEvent
The TransitionEvent
interface provides specific contextual information
associated with transitions.
6.1.1. IDL Definition
[Constructor(DOMString type, optional TransitionEventInit transitionEventInitDict)] interface TransitionEvent : Event { readonly attribute DOMString propertyName; readonly attribute float elapsedTime; readonly attribute DOMString pseudoElement; }; dictionary TransitionEventInit : EventInit { DOMString propertyName = ""; float elapsedTime = 0.0; DOMString pseudoElement = ""; };
6.1.2. Attributes
-
propertyName, of type DOMString, readonly
of typeDOMString
, readonly -
The name of the CSS property associated with the transition.
-
elapsedTime, of type float, readonly
of typefloat
, readonly -
The amount of time the transition has been running, in seconds, when this event fired not including any time spent in the delay phase. The precise calculation for of this member is defined along with each event type.
-
pseudoElement, of type DOMString, readonly
of typeDOMString
, readonly -
The name (beginning with two colons) of the CSS pseudo-element on which the transition occurred (in which case the target of the event is that pseudo-element’s corresponding element), or the empty string if the transition occurred on an element (which means the target of the event is that element).
TransitionEvent(type, transitionEventInitDict)
is an event constructor.
6.2. Types of TransitionEvent
The different types of transition events that can occur are:
- transitionrun
-
The
transitionrun
event occurs when a transition is created (i.e., when it is added to the set of running transitions).A negative transition-delay will cause the event to fire with an
elapsedTime
equal to the absolute value of the delay capped to the transition-duration of the animation. That is, the elapsed time is equal tomin(max(-transition-delay, 0), transition-duration)
.- Bubbles: Yes
- Cancelable: No
- Context Info: propertyName, elapsedTime, pseudoElement
- transitionstart
-
The
transitionstart
event occurs when a transition’s delay phase ends.The value of
elapsedTime
fortransitionstart
events is the same as the value used fortransitionrun
events.- Bubbles: Yes
- Cancelable: No
- Context Info: propertyName, elapsedTime, pseudoElement
- transitionend
-
The
transitionend
event occurs at the completion of the transition. In the case where a transition is removed before completion, such as if the transition-property is removed, then the event will not fire.The value of
elapsedTime
for this event is equal to the value of transition-duration.- Bubbles: Yes
- Cancelable: No
- Context Info: propertyName, elapsedTime, pseudoElement
- transitioncancel
-
The
transitioncancel
event occurs when a transition is cancelled.The
elapsedTime
fortransitioncancel
events is the number of seconds from the end of the transition’s delay to the moment when the transition was cancelled. If the transition had a negative transition-delay, the beginning of the transition is the moment equal to the absolute value of transition-delay seconds prior to when the transition was actually triggered. Alternatively, if the transition had a positive transition-delay and the event is fired before the transition’s delay has expired, theelapsedTime
will be zero.- Bubbles: Yes
- Cancelable: No
- Context Info: propertyName, elapsedTime, pseudoElement
6.3. Event handlers on elements, Document
objects, and Window
objects
The following are the event handlers (and their corresponding event
handler event types) that must be supported by all HTML elements, as
both event handler content attributes and event handler IDL
attributes; and that must be supported by all Document
and Window
objects, as event handler IDL attributes:
Event handler | Event handler event type |
---|---|
ontransitionrun | transitionrun |
ontransitionstart | transitionstart |
ontransitionend | transitionend |
ontransitioncancel | transitioncancel |
7. DOM Interfaces
This specification extends the GlobalEventHandlers
interface from HTML to
add event handler IDL attributes for transition events as defined in §6.3 Event handlers on elements, Document objects, and Window objects.
7.1. IDL Definition
partial interface GlobalEventHandlers { attribute EventHandler ontransitionrun; attribute EventHandler ontransitionstart; attribute EventHandler ontransitionend; attribute EventHandler ontransitioncancel; };
8. Animation of property types
Some property types can be interpolated, which means they can animate smoothly from one value to another. Other property types cannot, and thus animate only in a single step from one value to the other.
8.1. Animation of interpolated property types
When interpolating between two values, Vstart and Vend, interpolation is done using the output p of the timing function, which gives the portion of the value space that the interpolation has crossed. Thus the result of the interpolation is Vres = (1 - p) ⋅ Vstart + p ⋅ Vend.
However, if this value (Vres) is outside the allowed range of values for the property, then it is clamped to that range. This can occur if p is outside of the range 0 to 1, which can occur if a timing function is specified with a y1 or y2 that is outside the range 0 to 1.
The following describes how each property type undergoes transition or animation.
- color: interpolated via red, green, blue and alpha components (treating each as a number, see below). The interpolation is done between premultiplied colors (that is, colors for which the red, green, and blue components specified have been multiplied by the alpha).
- length: interpolated as real numbers.
- percentage: interpolated as real numbers.
- length, percentage, or calc: when both values are lengths, interpolated as lengths; when both values are percentages, interpolated as percentages; otherwise, both values are converted into a calc() function that is the sum of a length and a percentage (each possibly zero), and these calc() functions have each half interpolated as real numbers.
- integer: interpolated via discrete steps (whole numbers). The interpolation happens in real number space and is converted to an integer by rounding to the nearest integer, with values halfway between a pair of integers rounded towards positive infinity.
- font weight: interpolated via discrete steps (multiples of 100). The interpolation happens in real number space and is converted to an integer by rounding to the nearest multiple of 100, with values halfway between multiples of 100 rounded towards positive infinity.
- number: interpolated as real (floating point) numbers.
- rectangle: interpolated via the x, y, width and height components (treating each as a number).
- visibility: if one of the values is visible, interpolated as a discrete step where values of the timing function between 0 and 1 map to visible and other values of the timing function (which occur only at the start/end of the transition or as a result of cubic-bezier() functions with Y values outside of [0, 1]) map to the closer endpoint; if neither value is visible then not interpolable.
- shadow list: Each shadow in the list (treating none as a 0-length list) is interpolated via the color (as color) component, and x, y, blur, and (when appropriate) spread (as length) components. For each shadow, if both input shadows are inset or both input shadows are not inset, then the interpolated shadow must match the input shadows in that regard. If any pair of input shadows has one inset and the other not inset, the entire shadow-list is uninterpolable. If the lists of shadows have different lengths, then the shorter list is padded at the end with shadows whose color is transparent, all lengths are 0, and whose inset (or not) matches the longer list.
- gradient: interpolated via the positions and colors of each stop. They must have the same type (radial or linear) and same number of stops in order to be animated. Note: [CSS3-IMAGES] may extend this definition.
- paint server (SVG): interpolation is only supported between: gradient to gradient and color to color. They then work as above.
- simple list of other types: If the lists have the same number of items, and each pair of values can be interpolated, each item in the list is interpolated using the rules given for those types. Otherwise the values are not interpolable.
- repeatable list of other types: The result list has a length that is the least common multiple of the lengths of the input lists. Each item in the result is the interpolation of the value from each input list repeated to the length of the result list. If a pair of values cannot be interpolated, then the lists are not interpolable. The repeatable list concept ensures that a list that is conceptually repeated to a certain length (as background-origin is repeated to the length of the background-image list) or repeated infinitely will smoothly transition between any values, and so that the computed value will properly represent the result (and potentially be inherited correctly).
Future specifications may define additional types that can be animated.
See the definition of transition-property for how animation of shorthand properties and the all value is applied to any properties (in the shorthand) that can be animated.
8.2. Animation in steps of other property types
When interpolating between two values that cannot be interpolated, Vstart and Vend, interpolation is done using the output p of the timing function. If p is less than 0.5, then the result of the interpolation is Vstart; if p is greater than or equal to 0.5, then the result of the interpolation is Vend.
This is a recent change to which implementations have not yet updated. (Prior to the change CSS Transitions and CSS Animations did not run on such changes.) It’s possible that it won’t be compatible with existing Web content. If that is the case, the problem may be mitigated by restricting this behavior only to CSS Animations (and not to CSS Transitions), and/or restricting it to step timing functions.
9. Animatable properties
The definition of each CSS property defines when the values of that property can be interpolated by referring to the definitions of property types in the previous section. The animated value is interpolated from the from and to values when both the from and the to values of the property have the type described. (When a composite type such as "length, percentage, or calc" is listed, this means that both values must fit into that composite type.) When multiple types are listed in the form "either A or B", both values must be of the same type to be interpolable.
Otherwise, since the from and to values cannot be interpolated, the animation is done in a single step.
The transition-* properties defined in this specification do not undergo transitions.
For properties that exist at the time this specification was developed, this specification defines how they are animated. However, future CSS specifications may define additional properties, additional values for existing properties, or additional animation behavior of existing values. In order to describe new animation behaviors and to have the definition of animation behavior in a more appropriate location, future CSS specifications should include an "Animatable:" line in the summary of the property’s definition (in addition to the other lines described in [CSS21], section 1.4.2). This line should say "no" to indicate that a property cannot be animated or should reference an animation behavior (which may be one of the behaviors in the Animation of property types section above, or may be a new behavior) to define how the property animates. Such definitions override those given in this specification.
It no longer makes sense for this line to be called "Animatable". It should probably be renamed to "Interpolation", and the "no" value renamed to "discrete" or "in steps". See mailing list thread: message 1, message 2
9.1. Properties from CSS
The following definitions define the animation behavior for properties in CSS Level 2 Revision 1 ([CSS21]) and in Level 3 of the CSS Color Module ([CSS3COLOR]).
9.2. Properties from SVG
All properties defined as animatable in the SVG specification, provided they are one of the property types listed above.
10. Security Considerations
This section is not normative.
The security implications of this specification are limited because it doesn’t allow Web content to do things that it could not do before. Rather, it allows things that could previously be done with script to be done declaratively, and it ways that implementations can optimize (for frame rate and CPU usage).
One of the major categories of optimizations that implementations can make is implementing animation of certain high-value properties (such as transform and opacity) run on a browser’s compositor thread or process without updating style or layout on the main Web content thread unless up-to-date style data are needed. This optimization often requires allocations of graphics memory to display the contents of the element being animated. Implementations should take care to ensure that Web content cannot trigger unsafe out-of-memory handling by using large numbers of animations or animations on elements covering large areas (where large may be defined in terms of pre-transform or post-transform size).
11. Privacy Considerations
This section is not normative.
As for security, the privacy considerations of this specification are limited because it does not allow Web content to do things that it could not do before.
This specification may provide additional mechanisms that help to determine characteristics of the user’s hardware or software. However, ability to determine performance characteristics of the user’s hardware or software is common to many Web technologies, and this specification does not introduce new capabilities.
As described in §12 Accessibility Considerations, implementations may provide mitigations to help users with disabilities. These mitigations are likely to be detectable by Web content, which means that users who would benefit from these mitigations may face a tradeoff between keeping their disability private from the Web content or benefiting from the mitigation.
12. Accessibility Considerations
This section is not normative.
12.1. Motion
This specification provides declarative mechanisms for animations that previously needed to be done using script. Providing a declarative mechanism has multiple effects: it makes such animations easier to make and thus likely to be more common, but it also makes it easier for user agents to modify those animations if such modifications are needed to meet a user’s accessibility needs.
Thus, users who are sensitive to movement, or who require additional time to read or understand content, may benefit from user agent features that allow animations to be disabled or slowed down. (But see §11 Privacy Considerations for information on the privacy implications of such mitigations.)
User agent implementors should be aware that Web content may depend on the firing of transition events, so implementations of such mitigations may wish to fire transition events even if the transitions were not run as continuous animations. However, it is probably poor practice for Web content to depend on such events to function correctly.
12.2. Cascade
The CSS cascade is a general mechanism in CSS that allows user needs to interact with author styles. This specification interacts with the cascade, but since it only allows animation between values that result from the existing cascade rules, it does not interfere with the user’s ability to force CSS properties to have particular values.
The cascade also allows users to disable transitions entirely by overriding the transition properties.
13. Changes since Working Draft of 19 November 2013
The following are the substantive changes made since the Working Draft dated 19 November 2013:
- Values that cannot be interpolated are transitioned when the timing function crosses its midpoint, instead of not running transitions and changing immediately.
- Canceling and interrupting of running transitions is defined much more precisely. This includes the after-change style no longer including styles from CSS Transitions.
- Completion of transitions is defined somewhat more precisely.
- The transitionend event is no longer cancelable. This is since it has no default action, so canceling it would have no meaning. It also matches the animation events.
- The
transitionrun
,transitionstart
, andtransitioncancel
events have been added. - The interpolation of inset values on shadow lists is no longer backwards.
- A Conformance section, §10 Security Considerations section, §11 Privacy Considerations section, §12 Accessibility Considerations section, and IDL Index have been added
- The identifiers accepted by transition-property are defined in terms of <custom-ident>.
- Define a little bit more about when changes to computed values happen, by saying at least that implementations must not update the effects of computed values without actually updating computed values.
For more details on these changes, see the version control change log since 2015 January 26 and the change log from 2013 March 28 to 2015 January 26.
For changes in earlier working drafts:
- see the changes section in the 19 November 2013 Working Draft
- see the the ChangeLog for changes in previous working drafts
- For more details on these changes, see the version control change logs, which are split in three parts because of file renaming: change log since 2015 January 26, change log from 2013 March 28 to 2015 January 26, change log before 2013 March 28.
14. Acknowledgments
Thanks especially to the feedback from Tab Atkins, Carine Bournez, Aryeh Gregor, Vincent Hardy, Anne van Kesteren, Cameron McCormack, Alex Mogilevsky, Jasper St. Pierre, Estelle Weyl, and all the rest of the www-style community.