Julia Harvey: That’s a Mooring: June 29th, 2016

NOAA Teacher at Sea

Julia Harvey

Aboard NOAA Ship Hi’ialakai

June 25 – July 3rd 2016

 

Mission: WHOI Hawaii Ocean Timeseries Station (WHOTS)

Geographical Area of Cruise: Pacific Ocean, north of Hawaii

Date: June 29th, 2016

 

Weather Data from the Bridge

(June 29th, 2016 at 12:00 pm)

Wind Speed: 12 knots

Temperature: 26.3 C

Humidity: 87.5%

Barometric Pressure: 1017.5 mb

 

Science and Technology Log

Approaching Weather

Approaching Weather

When an anchor is dropped, forces in the ocean will cause this massive object to drift as it falls.  Last year, after the anchor of mooring 12 was dropped, an acoustic message was sent to the release mechanism on the anchor to locate it.  This was repeated in three locations so that the location of the anchor could be triangulated much like how an earthquake epicenter is found.  This was repeated this year for mooring 13 so next year, they will know where it is.  From where we dropped the anchor to where it fell, was a horizontal distance of 3oo meters.  The ocean moved the 9300 pound anchor 300 meters.  What a force!

The next morning as the ship was in position, another acoustic message was sent that triggered the release of the glass floats from the anchor. Not surprisingly, the floats took nearly an hour to travel up the nearly 3 miles to the surface.

Float recovery

A small boat went to retrieve the mooring attached to the floats

Once the floats were located at the surface, a small boat was deployed to secure the end of the mooring to the Hi’ialakai. The glass floats were loaded onto the ship.  17 floats that had imploded when they were deployed last year.  Listen to imploding floats recorded by the hydrophone.  Implosion.

Selfie with an imploded float.

Selfie with an imploded float.

Next, came the lengthy retrieval of the line (3000+ meters). A capstan to apply force to the line was used as the research associates and team arranged the line in the shipping boxes. The colmega and nylon retrieval lasted about 3 hours.

Bringing up the colmega line.

Bringing up the colmega line and packing it for shipping.

Once the wire portion of the mooring was reached, sensors were removed as they rose and stored. Finally the mooring was released, leaving the buoy with about 40 meters of line with sensors attached and hanging below.

Navigating to buoy.

Navigating to buoy.

The NOAA officer on the bridge maneuvered the ship close enough to the buoy so that it could be secured to the ship and eventually lifted by the crane and placed on deck. This was followed by the retrieval of the last sensors.

Buoy onboard

Bringing the buoy on board.

 

 

 

 

 

 

 

 

 

The following day required cleaning sensors to remove biofoul.  And the buoy was dismantled for shipment back to Woods Hole Oceanographic Institution.

Kate scrubbing sensors to remove biofoul.

Kate scrubbing sensors to remove biofoul.

 

Dismantling the buoy.

Dismantling the buoy.

 

 

 

 

 

 

 

 

 

 

Mooring removal was accomplished in seas with 5-6 feet swells at times. From my vantage point, everything seemed to go well in the recovery process. This is not always the case. Imagine what would happen, if the buoy separated from the rest of the mooring before releasing the floats and the mooring is laying on the sea floor? What would happen if the float release was not triggered and you have a mooring attached to the 8000+ pound anchor?  There are plans for when these events occur.  In both cases, a cable with a hook (or many hooks) is snaked down to try and grab the mooring line and bring it to the surface.

Now that the mooring has been recovered, the science team continues to collect data from the CTD (conductivity/temperature/depth) casts.  By the end of tomorrow, the CTDs would have collected data for approximately 25 hours.  The data from the CTDs will enable the alignment of the two moorings.

CTD

CTD

The WHOTS (Woods Hole Oceanographic Institution Hawaii Ocean Time Series Site) mooring project is led by is led by two scientists from Woods Hole Oceanographic Institution;  Al Plueddeman and Robert Weller.  Both scientists have been involved with the project since 2004.  Plueddeman led this year’s operations and next year it will be Weller.  Plueddeman recorded detailed notes of the operation that helped me fill in some blanks in my notes.  He answered my questions.  I am thankful to have been included in this project and am grateful for this experience and excited to share with my students back in Eugene, Oregon.

Al Plueddeman

Al Plueddeman, Senior Scientist

The long term observations (air-sea fluxes) collected by the moorings at Station Aloha will be used to better understand climate variability.  WHOTS is funded by NOAA and NSF and is a joint venture with University of Hawaii.  I will definitely be including real time and archived data from WHOTS in Environmental Science.

Personal Log

I have really enjoyed having the opportunity to talk with the crew of the Hi’ialakai.  There were many pathways taken to get to this point of being aboard this ship.  I learned about schools and programs that I had never even heard about.  My students will learn from this adventure of mine, that there are programs that can lead them to successful oceanic careers.

Brian Kibler

Brian Kibler

I sailed with Brian Kibler in 2013 aboard the Oscar Dyson up in the Gulf of Alaska.  He completed a two year program at Seattle Maritime Academy where he became credentialed to be an Able Bodied Seaman.  After a year as an intern aboard the Oscar Dyson, he was hired.  A few years ago he transferred to the Hi’ialakai and has now been with NOAA for 5 years.  On board, he is responsible for rigging, watch and other tasks that arise.  Brian was one of the stars of the video I made called Sharks on Deck. Watch it here.

Tyler Matta

Tyler Matta, 3rd Engineer

Tyler Matta has been sailing with NOAA for nearly a year.  He sought a hands-on engineering program and enrolled at Cal Maritime (Forbes ranked the school high due to the 95% job placement) and earned a degree in maritime engineering and was licensed as an engineer.  After sailing to the South Pacific on a 500 ft ship, he was hooked.  He was hired by NOAA at a job fair as a 3rd engineer and soon will have enough sea days to move to 2nd engineer.

 

 

There are 6 NOAA Corps members on  the Hi’ialakai.  They all went through an approximately 5 month training program at the Coast Guard Academy in New London, CT.  To apply, a candidate should have a 4 year degree in a NOAA related field such as science, math or engineering.  Our commanding officer, Liz Kretovic, attended Massachusetts Maritime Academy and majored in marine safety and environmental protection.  Other officers graduated with degrees in marine science, marine biology, and environmental studies.

Nikki Chappelle, Bryan Stephan and Brian Kibler on the bridge.

Nikki Chappelle, Bryan Stephan and Brian Kibler on the bridge.

ENS Chappelle

NOAA Ensign Nicki Chappelle

Ensign (ENS) Nikki Chappelle is new to the NOAA Corps.  In fact, this is her first cruise aboard the Hi’ialakai and second with NOAA.  She is shadowing ENS Bryan Stephan for on the job training.  She spent most of her schooling just south of where I teach.  I am hoping that when she visits her family in Cottage Grove, Oregon that she might make a stop at my school to talk to my students.  She graduated from Oregon State University with degrees in zoology and communication.  In the past she was a wildfire fighter, a circus worker (caring for the elephants) and a diver at Sea World.

All of the officers have 2 four hour shifts a day on the bridge.  For example ENS Chappelle’s shifts are 8am to 12pm and 8pm to 12am.  The responsibilities of the officers include navigating the ship, recording meteorological information, overseeing safety.  Officers have other tasks to complete when not on the bridge such as correcting navigational maps or safety and damage control. ENS Stephan manages the store on board as a collateral assignment.  After officers finish training they are sent to sea for 2-3 years (usually 2) and then rotate to land for 3 years and then back to sea.  NOAA Officers see the world while at sea as they support ocean and atmospheric science research.

Frank Russo

ET Frank Russo

Electronics technician (ET) seem to be in short supply with NOAA.  There are lots of job opportunities.  According to Larry Wooten (from Newport’s Marine Operation Center of the Pacific), NOAA has hired 7 ETs since November.  Frank Russo III is sailing with NOAA for the first time as an ET.  But this is definitely not his first time at sea.  He spent 24 years in the navy, 10 at Military Sealift Command supporting naval assets and marines around the world.  His responsibilities on the Hi’ialakai include maintaining navigational equipment on the bridge, making sure the radio, radar and NAVTEX (for weather alerts) are functioning properly and maintaining the server so that the scientists have computer access.

I have met so many interesting people on the Hi’ialakai.  I appreciate everyone who took the time to chat with me about their careers or anything else.  I wish I had more time so that I could get to know more of the Hi’ialakai crew.  Thanks.  Special thanks to our XO Amanda Goeller and Senior Scientist Al Plueddeman for reviewing my blog posts.  And for letting me tag along.

 

Did You Know?

The buoy at the top of the mooring becomes a popular hang out for organisms in the area. As we approached mooring 12, there were several red-footed boobies standing their ground. There were also plenty of barnacles and other organisms that are planktonic in some stage of their lives. Fishing line is strung across the center of the buoy to discourage visitors but some still use the buoy as a rest stop. The accumulation of organism that can lead to corrosion and malfunction of the equipment is biofoul.

Boobies to be Evicted

Red-Footed Boobies

Biofoul prevention

Wires and line to prevent biofoul.

 One More Thing

South Eugene biology teacher Christina Drumm (who’s husband was  Ensign Chappelle’s high school math teacher) wanted to see pictures of the food.  So here it is.  Love and Happiness.

Lobster for Dinner

Lobster for Dinner

 

Last supper

Last supper on the Hi’ialakai

 

 

 

 

 

 

 

 

 

Colors of the sea

I love the colors of the sea.

Sea colors

Sea colors

Julia Harvey: The Nearest Land is 3 Miles Down, June 28, 2016

NOAA Teacher at Sea

Julia Harvey

Aboard NOAA Ship Hi’ialakai

June 25 – July 3, 2016

 

Mission: WHOI Hawaii Ocean Timeseries Station (WHOTS)

Geographical Area of Cruise: Pacific Ocean, north of Hawaii

Date: June 28th, 2016

 

Weather Data from the Bridge
(June 28th at 2pm)

Wind Speed: 12 knots

Temperature: 26.2 C

Humidity: 81%

Barometric Pressure: 1016.3 mb

 

Science and Technology Log

The Aloha Station is about 100 miles north of Oahu, Hawaii and was selected because of its closeness to port but distance from land influences (temperature, precipitation etc).  The goal is to select a site that represents the north Pacific, where data can be collected on the interactions between the ocean and the atmosphere. Woods Hole Oceanographic Institution Hawaii Ocean Time Series (WHOTS) has used this site for research since 2004.  You can find real time surface and meteorological data and archived data at the WHOTS website.

We are stationed in the vicinity of mooring 12 and 13 in the Aloha Station to begin intercomparison testing.  CTD (conductivity/temperature/depth) casts are conducted on a regular schedule. This data will help align the data from mooring 12 to mooring 13. If CTDs don’t match up between the two moorings then efforts will be made to determine why.

Mooring 13 is being inspected to make sure sensors are working. Photographs have been taken to determine measurement height of the instruments and where the water line is.

When I was aboard the Oscar Dyson, there were multiple studies going on besides the Walleye Pollock survey. The same is true on the Hi’ialakai. The focus is on the mooring deployment and recovery but there are a professor and graduate student from North Carolina State University who are investigating aerosol fluxes.

Professor Nicholas Meskhidze earned his first Physics degree from Tbilisi State University (Georgia).  He completed his PhD at Georgia Institute of Technology (USA).  He is now an Associate Professor at NC State University Department of Marine Earth and Atmospheric Sciences.

Meskhidze’s study on this cruise is looking at sea spray aerosol abundance in marine boundary layer and quantifying their flux values. Sea spray is formed from breaking waves. Sea spray analysis begins by collecting the aerosol. Using electrical current, particles of a given size (for example 100 nanometer (nm)) are selected for. This size represents the typical size of environmental climatically important particles (70-124 nm). The next step is to remove all other particles typically found in the marine boundary layer, such as ammonium sulfate, black carbon, mineral dust and any organics. The remaining particles are sea salt.

Sea spray analysis

Dr. Nicholas Meskhidze with the sea spray analysis equipment

Meskhidze is looking at the fluxes of the salt aerosols.  Sea salt aerosols are interesting.  If a salt aerosol is placed in 80% humidity, it doubles in size.  But then placed in 90% humidity, it quadruples in size. Due to their unique properties, sea salt aerosols can have considerable effect on atmospheric turbidity and cloud properties.

Aerosols are key components of our climate but little is known about them. Climate models are used to predict future climatic change, but how can one do this without understanding a key component (aerosols)?

little is known

Source: IPCC Fourth Assessment Report, Summary for Policy Makers

 

Personal Log

The galley (ship’s kitchen) is a happening place three times a day.  The stewards are responsible for feeding 30-40 people.

Chief Steward Gary Allen is permanently assigned to the Hi’ialakai. He has worked for NOAA for 42 years and he has stories to tell. He grew up in Tallahassee, Florida and his early work was at his father’s BBQ stand. He attended Southern University on a football scholarship and majored in food nutrition. After an injury, he finished school at Florida A & M. He worked for a few years in the hotel food industry, working his way up to executive chef. Eventually he was offered the sous chef job at Brennan’s in New Orleans. He turned it down to go to sea.

Chief Steward Allen Gary

Chief Steward Allen Gary

In 1971, he sailed for the first time with NOAA. The chief steward was a very good mentor and Gary decided to make cooking at sea his career. He took a little hiatus but was back with NOAA in 1975, where he would spend 18 years aboard the Discoverer and would become chief steward in 1984. He would sail on several other ships before finding his way to the Hi’ialakai in 2004.

In the 42 years at sea, Gary has seen many changes. Early in his career, he would only be able to call home from ports perhaps every 30 days. Now communication allows us to stay in contact more. He is married to his wife of 43 years and they raised 3 daughters in Seattle.

I asked him what he enjoys the most about being at sea. He has loved seeing new places that others don’t get to see. He has been everywhere, the arctic to Antarctica. He enjoys the serenity of being at sea. He loves cooking for all the great people he meets.

I met Ava Speights aboard the Oscar Dyson in 2013 when she was the chief steward and I was participating in the walleye pollock survey as a Teacher at Sea. She has been with NOAA for 10 years.

Ava Speights (on the right) and me

Ava Speights (on the right) and me

She and a friend decided to become seamen. Ava began working in a shipyard painting ships. In 2007, she became a GVA (general vessel assistant) and was asked to sail to the Bahamas for 2 weeks as the cook. This shifted her career pathway and through NOAA cooking classes and on the job training, she has worked her way up to chief steward.

She is not assigned to a specific ship. She augments, meaning she travels between ships as needed. She works 6 months of the year, which allows her to spend time with her 2 daughters, 1 son, 2 stepdaughters and 4 grandchildren. Her husband is an engineer with NOAA. Her niece is an AB (able bodied seaman) on deck. Her son is a chief cook for Seafarer’s.  And her daughter who just graduated high school will be attending Seafarer’s International Union to become a baker.  Sailing must run in her family.

She loves to cook and understands that food comforts people. She likes providing that comfort.  She has also enjoyed traveling the world from Africa to Belgium.

2nd Cook Nick Anderson

2nd Cook Nick Anderson

Nick is 2nd cook and this is his first cruise with NOAA. He attended cooking school in California and cooked for the Coast Guard for 6 years where he had on the job training. In 2014, he studied at the Culinary Institute of America and from there arrived on the Hi’ialakai. He also is an augmenter, so he travels from ship to ship as Ava does.

 

 

 

Did You Know?

The Hi’ialakai positioned mooring 13 in an area with a 6 mile radius known as the Aloha Station. Check out all of the research that takes place here at Station Aloha. There is a cabled observatory 4800 meters below the ocean surface. A hydrophone picks up on sounds and produces a seismograph. Check the results for the night the anchor was dropped.

Seismograph

Seismograph during Mooring Deployment

Click here to hear whales who pass through this area in February.

Pacific Sunset

Pacific Sunset

Julia Harvey: More to a Mooring than meets the Eye, June 26, 2016

NOAA Teacher at Sea

Julia Harvey

Aboard NOAA Ship Hi’ialakai

June 25 – July 3, 2016

 

Mission: WHOI Hawaii Ocean Timeseries Station (WHOTS)

Geographical Area of Cruise: Pacific Ocean, north of Hawaii

Date: June 26th, 2016

Weather Data from the Bridge

Wind Speed: 15 knots

Wind Direction: 100 degrees (slightly east southeast)

Temperature: 24.5 degrees C

Barometric Pressure: 1014.7 mb

Science and Technology Log

One of the primary objectives of this WHOTS project is to deploy WHOTS-13 mooring. This will be accomplished on our second day at sea.

Site of Mooring-13 courtesy of WHOTS Project Instructions

Site of Mooring-13
(courtesy of WHOTS Project Instructions)

The mooring site was chosen because it is far enough away from Hawaii so that it is not influenced by the landmasses. Mooring 13 will be located near mooring 12 in the North Pacific Ocean where the Northeast Trade Winds blow. Data collected from the moorings will be used to better understand the interactions between the atmosphere and the ocean. Instruments on the buoy record atmospheric conditions and instruments attached to the mooring line record oceanic conditions.

A look at interactions between the atmosphere and the ocean.

A look at interactions between the atmosphere and the ocean. [R. Weller, WHOI]

 

 

 

 

 

There is a lot more going on than just plopping a mooring in the sea. Chief Scientist Al Plueddemann from Woods Hole Oceanographic Institution and his team began in-port prep work on June 16th. This included loading, positioning and securing the scientific equipment on the ship.  A meteorological system needed to be installed on the Hi’ialakai to collect data critical to the mission.  And then there was the assembly of the buoy which had been shipped to Hawaii in pieces.  Once assembled, the sensors on the buoy were tested.

Meteorological Station on the Bow

Meteorological Station

As we left Oahu, we stopped to perform a CTD (conductivity/temperature/depth) cast. This allowed for the testing of the equipment and once water samples were collected, the calibration of the conductivity sensors occurred.

Sunday, June 26th, was the day of deployment. Beginning very early in the morning, equipment was arranged on deck to make deployment efficient as possible. And the science team mentally prepared for the day’s task.

Predeployment

The deck before deployment began. The buoy is the blue item on the left.

Promptly at 7:30 am, deployment began. The first stage was to deploy the top 47 meters of the mooring with sensing instruments called microcats attached at 5 meter intervals. A microcats has a memory card and will collect temperature, conductivity and pressure data about every three minutes until the mooring is removed next year.

Sensing instruments for the morring

Microcats for recording oceanic conditions

readied microcats

Microcats readied for deployment. They are lined up on the deck based on their deployment depth.

This portion of the mooring is then attached to the surface buoy, which is lifted by a crane and lowered overboard. More of the mooring with instruments is lowered over the stern.

The remainder of the mooring is composed of wire, nylon, 68 glass balls and an anchor.  At one point, the mooring wire became damaged. To solve this problem, marine technicians and crew removed the damaged portions and replaced the section with wire from a new spool. This process delayed the completion of mooring deployment but it showed how problems can be solved even when far out at sea.

After dinner, the nylon section of the rope was deployed. Amazingly, this section is more than 2000 meters long and will be hand deployed followed by a section of 1500 m colmega line. It was dark by the time this portion was in the water. 68 glass floats were then attached and moved into the water. These floats will help in the recovery of the mooring next year. The attachment to the anchor was readied.

glass floats for recovery

These glass floats will help when the mooring is recovered next year.

The anchor weighs 9300 pounds on deck and will sit at a depth of 4756 meters. That is nearly 3 miles below the ocean surface. The crane is used to lift the anchor overboard. The anchor will drop at 1.6 m/s and may take about 50 minutes to reach the bottom.  As the anchor sinks, the wire, nylon and the rest of the mooring will be pulled down. Once it reaches the bottom, the mooring will be roughly vertical from the buoy to the anchor.

 

Mooring Structure

Mooring Structure

Personal Log

I sailed aboard NOAA ship Oscar Dyson in 2013 so I already had a general idea of what life aboard a ship would be. Both ships have workout areas, laundry facilities, lounges, and of course messes where we all eat. But on the Hi’ialakai, I am less likely to get lost because of the layout. A door that goes up is near a door that goes down.

On our first day aboard, we held two safety drills. The first was the abandon ship drill. As soon as we heard 6 short and 1 long whistles, we grabbed our life jacket, survival suit and a hat. We reported to our muster stations. I am assigned to lifeboat #1 and I report the starboard side of 0-3 deck ( 2 levels up from my room). Once I arrived, a NOAA officer began taking role and told us to don the survival suit. This being my first time putting the suit on, I was excited. But that didn’t last long. Getting the legs on after taking off shoes was easy as was putting one arm in. After that, it was challenging. It was about 84 F outside. The suit is made of neoprene. And my hands were the shapes of mittens so imagine trying to zip it up. I finally was successful and suffered a bit to get a few photos. This was followed by a lesson for how to release the lifeboats. There are enough lifeboats on each side of the ship, to hold 150% of the capacity on board.

Survival Suit & Julia

Abandon Ship drill with Survival Suit

Safety is an important aspect of living aboard a NOAA ship. It is critical to practice drills just like we do at school. So when something does happen, everyone knows what to do. A long whistle signals a fire. All of the scientists report to the Dry Lab for a head count and to wait for further instruction.

I am reminded of how small our world really is.  At dinner Saturday, I discovered one of the new NOAA officers was from Cottage Grove, Oregon. Cottage Grove is just a short drive south of Eugene. She had a friend of mine as her calculus teacher.  Then a research associate asked me if I knew a kid, who had graduated from South Eugene High School and swam in Virginia. I did. He had not only been in my class but also swam with my oldest son on a number of relay teams growing up. Small world indeed.

 

Did You Know?

The Hi’ialakai was once a Navy surveillance ship (USNS Vindicator) during the Cold War. NOAA acquired it in 2001 and converted it to support oceanic research.

 

 

 

Julia Harvey: Here I Go Again/Getting Ready to Sail

NOAA Teacher at Sea
Julia Harvey
NOAA Ship Hi’ialakai
June 25 – July 3, 2016

Mission: Woods Hole Oceanographic Institution (WHOI) Hawaii Ocean Timeseries Station Thirteenth Setting
Geographical Area: Pacific Ocean North of Hawaii

Grand Canyon

My boys and I at the Grand Canyon in March 2016.

My name is Julia Harvey and I currently teach biology and environmental science at South Eugene High School in Eugene, Oregon. Next year I will also be teaching AP Biology. I have been teaching for 25 years beginning on the island of Vava’u in the Kingdom of Tonga. Some of my students have now become science teachers.

Julia with Sea Urchin copy

Early interest in marine sciences.

Eugene is at the southern end of the Willamette Valley and just about an hour away from the Pacific Ocean. In the valley, we are closely connected to the Pacific Ocean. The salmon that swim up our McKenzie River have made their way from the Pacific. Our wet and rainy climate is the result of weather patterns that originate off shore. And when it gets to hot in the valley, we head over to cool off on the beaches of the Pacific.

In 2013, I sailed aboard the Oscar Dyson on the Gulf of Alaska out of Kodiak. I was part of the third leg of the Pollock fish survey. Pollock is the fish used to make fish sticks and imitation crab. I didn’t know until this cruise, that the Pollock fishery is the one of the largest fisheries in the world. And I had never even heard of a Pollock until I was going to be sailing on the Oscar Dyson. I worked with amazing scientists on board who kindly helped me learn the process for finding schools of fish in the water using acoustics and then how to process the catch in order to provide information about the health of the fishery.

Pollock Survey

Happily surveying pollock

There were other studies going on the Oscar Dyson.  One involved surveying the ocean bottom and another involved counting  krill.

Enlarged Sorting Krill copy

Preparing to count krill.

I leave aboard the Hi’ialakai (easy to say after learning Tongan) in a few days. We will be at sea for 9 days, north of Hawaii.   The Chief Scientist is affiliated with Woods Hole Oceanographic Institute and other scientists are from University of Hawaii, NOAA Earth System Research Laboratory, and North Carolina State University. The main purpose of the study is to recover and deploy WHOTS moorings while collecting CTD (conductivity/temperature/depth) casts and data from shipboard sensors. I am especially interested to learn more about the sea spray analysis and how it relates to climatic effects.

This will be my first physical oceanography cruise. All of the studies I did aboard the Vantuna at Occidental College were biological as was the work done on the Oscar Dyson. I am excited to take my learning in a different direction.

I found it more difficult to pack for the cruise out of Hawaii then out of Alaska. This time, there is a larger range of weather that could be expected. Beginning on Oahu (shorts and tank tops) to the open ocean (steel toe boots and layers of clothes). But there are a few items that are making the trip with me again. I could not leave the Go Pro behind. I captured Dall porpoises bow surfing in 2013 as well as the processing of thousands of fish. And of course I have the anti-seasickness medication. It was wonderful to feel good the whole cruise last time. I will not be streaming videos but I will be entertained with a few books I packed.

I will be blogging several times while I am at sea and I hope you will continue to follow my journey at sea.

 

 

 

Julia Harvey: We Came, We Fished, Now What? August 8, 2013

NOAA Teacher at Sea
Julia Harvey
Aboard NOAA Ship Oscar Dyson (NOAA Ship Tracker)
July 22 – August 10, 2013  

Mission:  Walleye Pollock Survey
Geographical Area of Cruise:  Gulf of Alaska
Date:  8/8/13 

Weather Data from the Bridge (as of 17:00 Alaska Time):
Wind Speed:  15.72 knots
Temperature:  13.4 C
Humidity:  73%
Barometric Pressure:  1012.1 mb

I just read this heads up about the weather tonight.

I just read this heads up about the weather tonight.

 

Science and Technology Log:

We came.  We fished.  We measured, counted and weighed.  Now What?  We completed one last trawl on Tuesday night (August 6th).  When we finished we had caught over 65,000 walleye pollock and a whole lot of POP (Pacific ocean perch) on this leg of the survey.

The scientists now process and analyze the data.

Darin Jones and Chief Scientist Patrick Ressler going over data collected.

Darin Jones and Chief Scientist Patrick Ressler going over data collected.

Darin and Patrick will present at a public meeting when we are back in Kodiak on Friday.  They will discuss what was seen and preliminary findings of the walleye pollock survey.  Back in Seattle the MACE team will further evaluate the data along with data from the bottom trawl survey and determine the walleye pollock biomass for the Gulf of Alaska.  This will then be taken under advisement by the North Pacific Fishery Management Council.

There is also the lab to clean.  Even though we cleaned the lab after each trawl, it needed a good scrub down.  There were scales and slime hidden everywhere.  Just when you thought you were done, more scales were discovered.

Kirsten, Abigale and Darin cleaning the fish lab.

Kirsten, Abigale and Darin cleaning the fish lab.

Did You Know?

The note on the white board stated that there will be beam seas tonight.  What does that really mean?  It means the waves are moving in a direction roughly 90° from our heading.  So the water will be hitting us at a right angle to our keel.  It will be a rocking boat tonight.

Darin took a sample of the salmon shark’s fin when we caught it.  It will be sent to a scientist in Juneau who works at Auke Bay Laboratories (where Jodi works).  The sample will be used to examine the population genetics of the salmon shark and other species such as the Pacific sleeper shark.

Personal Log:

In my first blog, I wrote about a childhood dream of becoming an oceanographer.  After my third year of teaching in the Peace Corps, I decided education was my new direction.   I was excited to taste that bygone dream aboard the Oscar Dyson.  How do I feel now?  I jokingly sent an email to my assistant principal telling her to look for a new science teacher because I love life at sea.  I  love collecting data in the field.  Although I was not responsible for analyzing the data and I do miss my boys, I had an awesome cruise.  So where does that leave me?

Heading to Kodiak across the Gulf of Alaska

Heading to Kodiak across the Gulf of Alaska

It leaves me back in the classroom with an amazing sea voyage experience to share with my students.  I will always long for that oceanographic career that could have been.  But perhaps after my experience, I will inspire future oceanographers and fisheries scientists.  And I would do Teacher at Sea again in a heartbeat.  I will follow up with the outcomes and biomass estimates from MACE (Mid-Water Assessment & Conservation Engineering) and I will most definitely follow Jodi’s research on the use of multibeam sonar for seafloor mapping.

I want to say thank you to everyone who made my experience one of the best of my life and definitely the best professional development of my career.  Thank you to Jennifer Hammond, Elizabeth McMahon, Jennifer Annetta, Emily Susko and Robert Ostheimer for the opportunity to participate in the NOAA Teacher at Sea Program.  Thank you to NOAA for developing a practical and realistic opportunity to connect my students to ocean science.  Thank you to the science team (Chief Scientist Patrick Ressler, Darin Jones, Paul Walline, Jodi Pirtle, Kirsten Simonsen, and Abigale McCarthy) aboard the Oscar Dyson for their willingness to train me, answer all of my questions, preview my blogs, and to allow me have a glimpse of their lives as scientists.  Thank you to Patrick Ressler and XO Chris Skapin for promptly providing feedback on my blogs.  And a special thanks to the night shift crew (Jodi, Paul and Darin).  I was very nervous about adjusting to my work hours (4 pm to 4 am) especially after falling asleep that first night, but I am very grateful for colleagues who were fascinating and night-time enjoyable.  Chats with everyone aboard the Oscar Dyson from fishermen to NOAA Corps to engineers to stewards to scientists were educational and pleasant.  I met lots of people from all over the U.S. and some just from Newport (2 hours from Eugene).

WOW.  How fortunate was I to be chosen?  I am nearly speechless about what I saw and what I did.  What a mind blowing three weeks.  Thank You!  Thank You!  Thank You!

Now I begin the transition of living during daylight hours.

Here I am

Here I am before the system hit us.

I hope everyone was able to sample a little of my adventure.  I appreciate everyone who followed my blog especially Camas Country Mill folks.

Julia Harvey: Calibration in Sea-Otterless Sea Otter Bay, August 7, 2013

NOAA Teacher at Sea
Julia Harvey
Aboard NOAA Ship Oscar Dyson (NOAA Ship Tracker)
July 22 – August 10, 2013 

Mission:  Walleye Pollock Survey
Geographical Area of Cruise:  Gulf of Alaska
Date: 8/7/13 

Weather Data from the Bridge (as of 21:00 Alaska Time):
Wind Speed:  10.42 knots
Temperature:  13.6 C
Humidity:  83%
Barometric Pressure:  1012.4 mb

Current Weather: A high pressure system is building in the east and the swells will increase to 8 ft tonight.

Science and Technology Log:

Before I begin, I must thank Paul for educating me on the calibration process.  Because calibration occurred during the day shift, I was not awake for some of it.

The EK60 is a critical instrument for the pollock survey.  The calculations from the acoustic backscatter are what determines when and where the scientists will fish.  Also these measurements of backscatter are what are used, along with the estimates of size and species composition from the trawling, to estimate fish biomass in this survey.  If the instruments are not calibrated then the data collected would possibly be unreliable.

Calibration of the transducers is done twice during the summer survey.  It was done before leg one in June, which began out of Dutch Harbor, and again now near Yakutat as we end leg three and wrap up the 2013 survey.

As we entered Monti Bay last night, Paul observed lots of fish in the echosounder.  This could pose a problem during calibrations.  The backscatter from the fish would interfere with the returns from the spheres.  Fortunately fish tend to migrate lower in the water column during the day when calibrations were scheduled.

This morning the Oscar Dyson moved from Monti Bay, where we stopped last night, into Sea Otter Bay and anchored up.  The boat needs to be as still as possible for the calibrations to be successful.

Monti and Sea Otter Bays Map by GoogleEarth

Monti and Sea Otter Bays
Map by GoogleEarth

Site of calibration: Sea Otter Bay

Site of calibration: Sea Otter Bay

Calibration involves using small metal spheres made either of copper or tungsten carbide.

Chief Scientist Patrick Ressler with a tungsten carbide sphere

Chief Scientist Patrick Ressler with a tungsten carbide sphere

Copper sphere photo courtesy Richard Chewning (TAS)

Copper sphere
photo courtesy Richard Chewning (TAS)

The spheres are placed in the water under transducers.  The sphere is attached to the boat in three places so that the sphere can be adjusted for depth and location.  The sphere is moved throughout the beam area and pings are reflected.  This backscatter (return) is recorded.  The scientists know what the strength of the echo should be for this known metal.  If there is a significant difference, then data will need to be processed for this difference.

The 38 khz transducer is the important one for identifying pollock.  A tungsten carbide sphere was used for its calibration. Below shows the backscatter during calibration, an excellent backscatter plot.

Backscatter from calibration

Backscatter from calibration

The return for this sphere was expected to be -42.2 decibels at the temperature, salinity and depth of the calibration  The actual return was -42.6 decibels.  This was good news for the scientists.  This difference was deemed to be insignificant.

Personal Log:

Calibration took all of the day and we finally departed at 4:30 pm.  The views were breathtaking.  My camera doesn’t do it justice.  Paul and Darin got some truly magnificent shots.

Goodbye Yakutat Bay

Goodbye Yakutat Bay

As we left Yakutat Bay, I finally saw a handful of sea otters.  They were never close enough for a good shot.  They would also dive when we would get close.  As we were leaving, we were able to approach Hubbard Glacier, another breathtaking sight.  Despite the chill in the air, we stayed on top getting picture after picture.  I think hundreds of photos were snapped this evening.

The Oscar Dyson near Hubbard Glacier

The Oscar Dyson near Hubbard Glacier

Location of Hubbard Glacier.  Map from brentonwhite.com

Location of Hubbard Glacier. Map from brentonwhite.com

Many came out in the cool air to check out Hubbard Glacier

Many came out in the cool air to check out Hubbard Glacier

I even saw ice bergs floating by

I even saw ice bergs floating by

Lots of ice from the glacier as we neared

Lots of ice from the glacier as we neared

Nearby Hubbard Glacier with no snow or ice

Near Hubbard Glacier

And there it is: Hubbard Glacier

And there it is: Hubbard Glacier

Hubbard Glacier

Hubbard Glacier

Hubbard Glacier

Hubbard Glacier

Did You Know?

According to the National Park Service, Hubbard Glacier is the largest tidewater glacier in North America.  At the terminal face it is 600 feet tall.  This terminal face that we saw was about 450 years old.  Amazing!

Read More about Hubbard Glacier

Julia Harvey: Working on the Night Shift (During Shark Week), August 5, 2013

NOAA Teacher at Sea
Julia Harvey
Aboard NOAA Ship Oscar Dyson (NOAA Ship Tracker)
July 22 – August 10, 2013     

Mission:  Walleye Pollock Survey
Geographical Area of Cruise:  Gulf of Alaska
Date:  8/5/13 

Weather Data from the Bridge (as of 17:00 Alaska Time):
Wind Speed:  9.54 knots
Temperature:  15.7 C
Humidity: 83 %
Barometric Pressure:  1017.9 mb

Current Weather: The winds have decreased and we are not moving as much.  The weather report calls for an increase to the winds with 7 ft swells on Wednesday.  But maybe it will die down before it reaches us.

August 6th sunset

August 6th sunset

Science and Technology Log:

We only will fish during daylight hours.  The sun is now setting before 10:00 pm and rising around 5:30 am.  And even though we are not fishing between sunset and sunrise, science continues.  At nightfall, we break transect and Jodi begins her data collection.

The Sustainable Fisheries Act mandates an assessment of essential fish habitat.  This is in conjunction with stock assessments of groundfish.   Jodi’s research involves integrating multibeam accoustic technology to characterize trawlable and untrawlable seafloor types and habitat for managed species.

Species that are part of the groundfish survey.

Species that are part of the groundfish survey.
Photo courtesy of Chris Rooper (Alaska Fisheries Science Center) from the Snakehead Bank multi-beam survey

A bottom trawl survey is conducted every other year in the Gulf of Alaska.  The goal is to better identify seafloor types using multibeam acoustics.  This would help improve groundfish assessment, and limit damage to habitat and trawling gear.

The Gulf of Alaska survey area is divided into square grids.

Trawlable or Untrawlable?

Trawlable or Untrawlable?

On this cruise we are conducting multibeam mapping in trawlable and untrawlable grid cells.  A grid cell is divided into 3 equidistant transects for a multibeam survey.  Jodi directs the ship to follow these smaller transect lines.  While the ship is following the transects lines, the multibeam sonar is active and data is collected.

Multibeam sonar

Multibeam sonar
Photo courtesy of Tom Weber (University of New Hampshire)

Jodi monitors the screen during ME70 activity.

Jodi monitors the screen during ME70 activity.

The SIMRAD ME70 is the multibeam sonar that Jodi is using for her research.  There are 6 transducers on the ship that will send out a fan of 31beams of varying frequencies.  The strength of their return (backscatter) can be analyzed for sea floor type.  Looking at the diagram below, you can see the differences in backscatter clearly in the range of 30 to 50 degrees (away from straight down).

Illustration of the multi-beams generated. photo courtesy of http://www.id-scope.mc/Geophy03_EN.html

Illustration of the multi-beams generated.
photo courtesy of http://www.id-scope.mc/Geophy03_EN.html

Silts will have a very weak backscatter and rock will have a strong backscatter.

Substrate differences when looking at 30 - 50 degrees. Courtesy of Jodi Pirtle

Substrate differences when looking at 30 – 50 degrees.
Courtesy of Jodi Pirtle

After the transects are completed,  Jodi and Darin complete 1 – 3 camera drops to record visually how the seafloor appears.  This camera below will be lowered to the ocean floor and video footage will stream to the computer for 10 minutes.  Then the camera is brought up.

Drop Camera

Drop Camera

An example of an untrawlable area. Photo courtesy of Jodi Pirtle
An example of an untrawlable area.
Photo courtesy of Jodi Pirtle.

Last night, Darin gave me the opportunity to operate the camera drop.  After a bit of instruction, it was showtime.  I am very grateful for the chance to explore the seafloor.

I operated the drop camera.   Photo by Darin Jones

I operated the drop camera.
Photo by Darin Jones

Here is what I saw at 190 meters.

Fish and rocks on the seafloor.

Fish and rocks on the seafloor.

I saw a flatfish right in front of the camera.

I saw a flatfish right in front of the camera.

For more photos of my drop camera experience, see the end of this blog.

CTD (conductivity, temperature, depth) drops are conducted in the grid as well.  Data that are gathered are used to correct for the speed of sound under varying conditions of the ocean.

CTD drop to record physical oceanographic data

CTD drop to record physical oceanographic data

The next day, Jodi processes the data from the ME70.  The bottom detection algorithm (a series of calculations) removes backscatter from the water column (from fish).

Each frame product represents 5 minutes of seafloor.  The following are outcomes from the algorithm and represent angle dependent data.  The images below, show backscatter on the left and bathymetry on the right.

This represents a homogenous sea floor.

This represents a homogenous sea floor.

This represents a heterogenous sea floor.

This represents a heterogenous sea floor.

Then Jodi takes into account a number of factors such as results from the CTD, motion of the boat (offset, attitude, pitch, roll), and tides.  These uncertainties are applied.

Uncertainties Photo courtesy of NOAA

Uncertainties
Photo courtesy of NOAA

Then she mosaics the data.

Result from Jodi's data.

Results
Photo courtesy of Tom Weber

The color image above represents the depth and the bottom image provides information on seafloor substrate.

The footage from the camera drops is also reviewed for more evidence of the seafloor substrate and to look for objects that would snag trawl nets.

I really appreciate Jodi taking the time to educate me on her research.  Her passion for her work is evident.  I look forward to seeing where her research leads.

Personal Log:

So who actually works the night shift (4pm to 4 am) in the “cave”.   Jodi Pirtle, Paul Walline and Darin Jones are the three scientists I have been lucky to work with during my cruise.

I  discussed Jodi’s work on the ship in the science section.  She has an extensive educational background.  She earned a BS in Biology from Western Washington University in Bellingham and then a MS in Environmental Science from Washington State University in Vancouver.  Then she earned a Ph.D in Fisheries from the University of Alaska at Fairbanks.  Her thesis was on ground fish habitat on rocky banks along the US west coast.  And her dissertation was based on red king crab nursery habitat.  She just finished her postdoc at the University of New Hampshire Center for Coastal and Ocean Mapping where her work applied multibeam acoustics to study trawlable and untrawlable seafloor types and groundfish habitat in the Gulf of Alaska.  She is now working on groundfish habitat suitability modeling after she was selected to be a National Research Council NOAA postdoc at the Alaska Fisheries Science Center Auke Bay Lab in Juneau.  Jodi continues to integrate multibeam acoustics in her research at ABL.

Jodi was born and raised in Cordova, Alaska which we came near when we were in Prince William Sound.  I have enjoyed listening to her speak of growing up in Alaska.  There are no roads out of Cordova, so imagine traveling with a sports team in high school?  I will not forget how she described the Exxon Valdez oil spill to me from the eyes of herself at 11 years old.

I have greatly appreciated her knowledge of the creatures we bring up in the nets.  She has an eye for finding the hidden gems like the chaetognath (arrow worm).

Jodi with a lumpsucker fish

Jodi with a lumpsucker fish

Jodi enjoys cross country skiing, snow boarding, berry picking, hiking and yoga.  She introduced me to beautiful ripe salmon berries back on Kodiak.

Delicate Salmonberries

Delicate salmon berries

Darin is a MACE (Midwater Assessment & Conservation Engineering) scientist who earned his BS in Marine Biology from the University of North Carolina at Wilmington and then his MS in Fisheries Resources form the University of Idaho at Moscow.  His master’s work involved disease resistance in bull trout.  He spent 5 years collecting fishing data as an observer aboard commercial fishing boats in Alaska.  He also tagged cod on George’s Bank and worked at several conservation fish hatcheries before moving to Seattle to work for MACE.  Darin is part of the team to assess the biomass of the walleye pollock in the Gulf of Alaska.

Darin filets some of the fish caught.

Darin filets some of the fish caught.

I have heard that Darin played in a band with some MACE colleagues but they broke up because one of them moved.  Maybe there will be a reunion tour.

Darin measuring a spiny dogfish

Darin measuring a spiny dogfish

He is a surfer and has surfed on Kodiak but his favorite surf spot so far was in Costa Rica. Darin is an easy-going guy who I often call Scott because he reminds me so much of a colleague at school.  Darin has patiently explained my tasks to me and helped me learn what I am really doing.  And he supported me as I did my first camera drop.

Darin watching me control drop camera. Photo by Jodi Pirtle

Darin watching me control drop camera.
Photo by Jodi Pirtle

Paul is a native of Washington state and completed his academics there as well.  He earned a BS in Oceanography and a Ph.D in Fisheries Oceanography from the University of Washington.  For 20 years he worked at the Israel Limnological and Oceanographic Institute.  He was involved in managing the water quality in Lake Kinneret.  His role was to estimate the number of fish to determine their affect on water quality.  Paul accomplished this by developing acoustics surveys of fish stocks in Israel.  Lake Kinneret, also known as the Sea of Galilee, provides Israel with 40% of its drinking water.

Lake Kinneret Courtesy of GoogleEarth

Lake Kinneret
Courtesy of GoogleEarth

In 2000, Paul moved back to Seattle and is working as a fisheries biologist for MACE.

Paul reading echograms and deciding to fish

Paul reading echograms and deciding to fish

I have been fortunate to see photographs that Paul has taken both on this trip and elsewhere.  He has an incredible talent for finding beauty.

Paul Walline

Paul Walline

I am writing this as we are tossing and turning in ten foot swells.  According to Paul, it doesn’t matter if the swells get any  bigger because the effect is the same. His calmness, knowledge and expertise remind me a lot of my dad.

As you can see, I worked with amazing, brilliant individuals.  The night shift rules.  We had awesome teamwork when a haul needed to be processed.

Jodi weighs and measures the pollock.  Darin removes otoliths and I packaged them up

Jodi weighs and measures the pollock. Darin removes otoliths and I packaged them up

And then we slept through the fog and awoke to beautiful sunsets (on some days).

Sunset by Yakutat Bay

Sunset by Yakutat Bay

Did You Know?

Glacial runoff changes the color of the ocean.  Compare the two photos.  The one at the bottom is near a glacier.

 

The ocean with no glacial runoff.

The ocean with no glacial runoff.

The ocean with glacial runoff.

The ocean with glacial runoff.

Animals Seen Today:

The bottom trawl that was brought up right when I began work, contained three types of sharks.  The smaller ones were spiny dogfish and spotted spiny dogfish.  The big one was a salmon shark.  Check out the video.

To read more about salmon sharks and to monitor their migration pattern, check out the content on Tagging of Pacific Predators website.  Click here: TOPP

My Drop Camera Experience

Checking out the bottom with the drop camera. Photo by Jodi Pirtle

Checking out the bottom with the drop camera.
Photo by Jodi Pirtle

Jodi and I monitoring the drop cam. Photo by Darin Jones

Jodi and I monitoring the drop cam.
Photo by Darin Jones

Julia bringing drop camera aboard. Photo by Darin Jones

Julia bringing drop camera aboard.
Photo by Darin Jones

Sea urchin in color.

Sea urchin in color.

Fish hiding on the left.

Fish hiding on the left.

Another sea urchin

Another sea urchin