Layout for Paleo Reports
Header File
The Start Position Column is used for fixed dumps only.
Start
Position |
Item
Length |
Column
Alias |
Definition |
001 |
001 |
Record Type |
CHAR RECORD TYPE
H-Header |
002 |
012 |
API Well Number |
CHAR API WELL NUMBER - A
unique well identification number consisting of a two digit state code, a three
digit county code, a five digit unique well code, and, if applicable, a two
digit bypass or sidetrack code as defined in API Bulletin D12A. |
014 |
002 |
Paleo Report ID Number |
NUM PALEO REPORT ID NUMBER - A
sequence number applied by MMS to each paleontologic report submitted for a given
borehole. |
016 |
002 |
Total Number of Reports for API |
NUM TOTAL NUMBER OF REPORTS FOR API. |
018 |
002 |
Surface Area |
CHAR SURFACE AREA -
The indicator used to identify an area name. |
020 |
006 |
Surface Block |
CHAR SURFACE BLOCK - Identifies
a subdivision of an official protraction in which the surface location of a well
is located. |
026 |
007 |
Lease Number |
CHAR LEASE NUMBER -
The
number assigned to a lease by the regulatory agency having jurisdiction over
mineral activity in the territory where the lease is located. |
033 |
005 |
Well Name |
CHAR WELL NAME - The name
assigned to the well. |
038 |
001 |
Public Information Code |
CHAR PUBLIC INFORMATION CODE-
Y= has been released. |
039 |
008 |
Public Release Date |
DATE PUBLIC RELEASE DATE (MMDDYYYY) -
The date on which the data contained in a paleontologic report is available for
public review or distribution to the public, as specified by law, regulation,
order or policy. |
047 |
008 |
Paleo Effective Date |
DATE PALEO EFFECTIVE DATE (MMDDYYYY) -
The date
the paleontologic report was written. |
055 |
035 |
Paleo Report Source |
CHAR PALEO REPORT SOURCE - Identifies
the origin of the paleontologic data. |
090 |
037 |
Paleo Reporter |
CHAR PALEO REPORTER - Indicates
the person or entity performing the microfossil analysis. |
127 |
050 |
Drilling Operator |
CHAR DRILLING OPERATOR |
177 |
005 |
High Sample |
NUM HIGH SAMPLE -
The
measured depth to the shallowest paleontologic sample available. |
182 |
005 |
Low Sample |
NUM LOW SAMPLE -
The
measured depth to the deepest
paleontologic sample available. |
187 |
001 |
Ecozone EQ MMS |
CHAR ECOZONE EQ MMS
Y= the ecozone (paleobathymetric) designations used in the paleontologic
report are equivalent to those used by the Minerals Management Service. |
188 |
005 |
First Sample Examined |
CHAR FIRST SAMPLE EXAMINED - The
measured depth of the first paleontologic sample analyzed. |
193 |
005 |
Borehole Measured Depth |
NUM BOREHOLE MEASURED DEPTH - The
actual distance, in feet, measured along the axis of the borehole from the rig Kelly
bushing to the total depth of the well. |
198 |
005 |
True Vertical Depth |
NUM TRUE VERTICAL DEPTH
-
The vertical distance, in feet, from the rig Kelly bushing to the maximum depth
of the well. |
203 |
005 |
RKB Elevation |
NUM RKB ELEVATION -
The
distance in feet, from the rig Kelly bushing to mean sea level. |
208 |
005 |
Water Depth |
NUM WATER DEPTH - The
distance at a well/platform location from mean sea level to the mud line. |
213 |
016 |
Surface X Coordinate |
NUM SURFACE X COORDINATE - X
coordinate for a surface location (East or West measurement). |
229 |
016 |
Surface Y Coordinate |
NUM SURFACE Y COORDINATE
- Y coordinate for a surface location (North or South measurement).
|
245 |
012 |
Surface Latitude |
NUM SURFACE LATITUDE -
The angular distance north or south of the equator measured in degrees along a
meridian. |
257 |
013 |
Surface Longitude |
NUM SURFACE LONGITUDE -
The angular distance on the earth, east or west of the prime meridian at
Greenwich, England, to the point on the earth's surface for which the position
is being determined. A positive value denotes East. |
270 |
|
Remarks |
CHAR REMARK |
|