(Revised January 29, 2015)
252.222-7000 Restrictions on Employment of Personnel.
As prescribed in 222.7004, use the following clause:
RESTRICTIONS ON EMPLOYMENT OF PERSONNEL (MAR 2000)
(a) The Contractor shall employ, for the purpose of performing that portion of the contract work in _______________, individuals who are residents thereof and who, in the case of any craft or trade, possess or would be able to acquire promptly the necessary skills to perform the contract.
(b) The Contractor shall insert the substance of this clause, including this paragraph (b), in each subcontract awarded under this contract.
(End of clause)
252.222-7001 Right of First Refusal of Employment--Closure of Military Installations.
As prescribed in 222.7102, use the following clause:
RIGHT OF FIRST REFUSAL OF EMPLOYMENT--CLOSURE OF MILITARY INSTALLATIONS (APR 1993)
(a) The Contractor shall give Government employees, who have been or will be adversely affected by closure of the military installation where this contract will be performed, the right of first refusal for employment openings under the contract. This right applies to positions for which the employee is qualified, if consistent with post-Government employment conflict of interest standards.
(b) Government personnel seeking preference under this clause shall provide the Contractor with evidence of eligibility from the Government personnel office.
(End of clause)
252.222-7002 Compliance with Local Labor Laws (Overseas).
As prescribed in 222.7201(a), use the following clause:
COMPLIANCE WITH LOCAL LABOR LAWS (OVERSEAS) (JUN 1997)
(a) The Contractor shall comply with all
(1) Local laws, regulations, and labor union agreements governing work hours; and
(2) Labor regulations including collective bargaining agreements, workers’ compensation, working conditions, fringe benefits, and labor standards or labor contract matters.
(b) The Contractor indemnifies and holds harmless the United States Government from all claims arising out of the requirements of this clause. This indemnity includes the Contractor’s obligation to handle and settle, without cost to the United States Government, any claims or litigation concerning allegations that the Contractor or the United States Government, or both, have not fully complied with local labor laws or regulations relating to the performance of work required by this contract.
(c) Notwithstanding paragraph (b) of this clause, consistent with paragraphs 31.205-15(a) and 31.205-47(d) of the Federal Acquisition Regulation, the Contractor will be reimbursed for the costs of all fines, penalties, and reasonable litigation expenses incurred as a result of compliance with specific contract terms and conditions or written instructions from the Contracting Officer.
(End of clause)
252.222-7003 Permit from Italian Inspectorate of Labor.
As prescribed in 222.7201(b), use the following clause:
PERMIT FROM ITALIAN INSPECTORATE OF LABOR (JUN 1997)
Prior to the date set for commencement of work and services under this contract, the Contractor shall obtain the prescribed permit from the Inspectorate of Labor having jurisdiction over the work site, in accordance with Article 5g of Italian Law Number 1369, dated October 23, 1960. The Contractor shall ensure that a copy of the permit is available at all reasonable times for inspection by the Contracting Officer or an authorized representative. Failure to obtain such permit may result in termination of the contract for the convenience of the United States Government, at no cost to the United States Government.
(End of clause)
252.222-7004 Compliance with Spanish Social Security Laws and Regulations.
As prescribed in 222.7201(c), use the following clause:
COMPLIANCE WITH SPANISH SOCIAL SECURITY LAWS AND REGULATIONS
(JUN 1997)
(a) The Contractor shall comply with all Spanish Government social security laws and regulations. Within 30 calendar days after the start of contract performance, the Contractor shall ensure that copies of the documents identified in paragraph (a)(1) through (a)(5) of this clause are available at all reasonable times for inspection by the Contracting Officer or an authorized representative. The Contractor shall retain the records in accordance with the Audit and Records clause of this contract.
(1) TC1--Certificate of Social Security Payments;
(2) TC2--List of Employees;
(3) TC2/1--Certificate of Social Security Payments for Trainees;
(4) Nominal (pay statements) signed by both the employee and the Contractor; and
(5) Informa de Situacion de Empressa (Report of the Condition of the Enterprise) from the Ministerio de Trabajo y S.S., Tesoreria General de la Seguridad Social (annotated with the pertinent contract number(s) next to the employee’s name).
(b) All TC1’s, TC2’s, and TC2/1’s shall contain a representation that they have been paid by either the Social Security Administration Office or the Contractor’s bank or savings institution. Failure by the Contractor to comply with the requirements of this clause may result in termination of the contract under the clause of the contract entitled “Default.”
(End of clause)
252.222-7005 Prohibition on Use of Nonimmigrant Aliens--Guam.
As prescribed in 222.7302, use the following clause:
PROHIBITION ON USE OF NONIMMIGRANT ALIENS--GUAM (SEP 1999)
The work required by this contract shall not be performed by any alien who is issued a visa or otherwise provided nonimmigrant status under Section 101(a)(15)(H)(ii) of the Immigration and Nationality Act (8 U.S.C. 1101(a)(15)(H)(ii)). This prohibition does not apply to the performance of work by lawfully admitted citizens of the freely associated states of the Republic of the Marshall Islands, the Federated States of Micronesia, or the Republic of Palau.
(End of clause)
252.222-7006 Restrictions on the Use of Mandatory Arbitration Agreements
As prescribed in 222.7405, use the following clause:
RESTRICTIONS ON THE USE OF MANDATORY ARBITRATION AGREEMENTS (DEC 2010)
(a) Definitions. As used in this clause–
“Covered subcontractor” means any entity that has a subcontract valued in excess of $1 million, except a subcontract for the acquisition of commercial items, including commercially available off-the-shelf items.
“Subcontract” means any contract, as defined in Federal Acquisition Regulation subpart 2.1, to furnish supplies or services for performance of this contract or a higher-tier subcontract thereunder.
(b) The Contractor—
(1) Agrees not to–
(i) Enter into any agreement with any of its employees or independent contractors that requires, as a condition of employment, that the employee or independent contractor agree to resolve through arbitration–
(A) Any claim under title VII of the Civil Rights Act of 1964; or
(B) Any tort related to or arising out of sexual assault or harassment, including assault and battery, intentional infliction of emotional distress, false imprisonment, or negligent hiring, supervision, or retention; or
(ii) Take any action to enforce any provision of an existing agreement with an employee or independent contractor that mandates that the employee or independent contractor resolve through arbitration–
(A) Any claim under title VII of the Civil Rights Act of 1964; or
(B) Any tort related to or arising out of sexual assault or harassment, including assault and battery, intentional infliction of emotional distress, false imprisonment, or negligent hiring, supervision, or retention; and
(2) Certifies, by signature of the contract, that it requires each covered subcontractor to agree not to enter into, and not to take any action to enforce, any provision of any existing agreements, as described in paragraph (b)(1) of this clause, with respect to any employee or independent contractor performing work related to such subcontract.
(c) The prohibitions of this clause do not apply with respect to a contractor’s or subcontractor’s agreements with employees or independent contractors that may not be enforced in a court of the United States.
(d) The Secretary of Defense may waive the applicability of the restrictions of paragraph (b) of this clause in accordance with Defense Federal Acquisition
Regulation Supplement 222.7404.
(End of clause)
252.222-7007 Representation Regarding Combating Trafficking in Persons.
As prescribed in 222.1771, use the following provision:
REPRESENTATION REGARDING COMBATING TRAFFICKING IN PERSONS (JAN 2015)
By submission of its offer, the Offeror represents that it—
(a) Will not engage in any trafficking in persons or related activities, including but not limited to the use of forced labor, in the performance of this contract;
(b) Has hiring and subcontracting policies to protect the rights of its employees and the rights of subcontractor employees and will comply with those policies in the performance of this contract; and
(c) Has notified its employees and subcontractors of—
(1) The responsibility to report trafficking in persons violations by the Contractor, Contractor employees, or subcontractor employees, at any tier; and
(2) Employee protection under 10 U.S.C. 2409, as implemented in DFARS subpart 203.9, from reprisal for whistleblowing on trafficking in persons violations.
(End of provision)
252.223-7001 Hazard Warning Labels.
As prescribed in 223.303, use the following clause:
HAZARD WARNING LABELS (DEC 1991)
(a) “Hazardous material,” as used in this clause, is defined in the Hazardous Material Identification and Material Safety Data clause of this contract.
(b) The Contractor shall label the item package (unit container) of any hazardous material to be delivered under this contract in accordance with the Hazard Communication Standard (29 CFR 1910.1200 et seq). The Standard requires that the hazard warning label conform to the requirements of the standard unless the material is otherwise subject to the labelling requirements of one of the following statutes:
(1) Federal Insecticide, Fungicide and Rodenticide Act;
(2) Federal Food, Drug and Cosmetics Act;
(3) Consumer Product Safety Act;
(4) Federal Hazardous Substances Act; or
(5) Federal Alcohol Administration Act.
(c) The Offeror shall list which hazardous material listed in the Hazardous Material Identification and Material Safety Data clause of this contract will be labelled in accordance with one of the Acts in paragraphs (b)(1) through (5) of this clause instead of the Hazard Communication Standard. Any hazardous material not listed will be interpreted to mean that a label is required in accordance with the Hazard Communication Standard.
MATERIAL (If None, Insert “None.”) |
ACT |
||||
(d) The apparently successful Offeror agrees to submit, before award, a copy of the hazard warning label for all hazardous materials not listed in paragraph (c) of this clause. The Offeror shall submit the label with the Material Safety Data Sheet being furnished under the Hazardous Material Identification and Material Safety Data clause of this contract.
(e) The Contractor shall also comply with MIL-STD-129, Marking for Shipment and Storage (including revisions adopted during the term of this contract).
(End of clause)
252.223-7002 Safety Precautions for Ammunition and Explosives.
As prescribed in 223.370-5, use the following clause:
SAFETY PRECAUTIONS FOR AMMUNITION AND EXPLOSIVES (MAY 1994)
(a) Definition. “Ammunition and explosives,” as used in this clause—
(1) Means liquid and solid propellants and explosives, pyrotechnics, incendiaries and smokes in the following forms:
(i) Bulk,
(ii) Ammunition;
(iii) Rockets;
(iv) Missiles;
(v) Warheads;
(vi) Devices; and
(vii) Components of (i) through (vi), except for wholly inert items.
(2) This definition does not include the following, unless the Contractor is using or incorporating these materials for initiation, propulsion, or detonation as an integral or component part of an explosive, an ammunition or explosive end item, or of a weapon system—
(i) Inert components containing no explosives, propellants, or pyrotechnics;
(ii) Flammable liquids;
(iii) Acids;
(iv) Oxidizers;
(v) Powdered metals; or
(vi) Other materials having fire or explosive characteristics.
(b) Safety requirements.
(1) The Contractor shall comply with the requirements of the DoD Contractors' Safety Manual for Ammunition and Explosives, DoD 4145.26-M, hereafter referred to as “the manual,” in effect on the date of the solicitation for this contract. The Contractor shall also comply with any other additional requirements included in the schedule of this contract.
(2) The Contractor shall allow the Government access to the Contractor's facilities, personnel, and safety program documentation. The Contractor shall allow authorized Government representatives to evaluate safety programs, implementation, and facilities.
(c) Noncompliance with the manual.
(1) If the Contracting Officer notifies the Contractor of any noncompliance with the manual or schedule provisions, the Contractor shall take immediate steps to correct the noncompliance. The Contractor is not entitled to reimbursement of costs incurred to correct noncompliances unless such reimbursement is specified elsewhere in the contract.
(2) The Contractor has 30 days from the date of notification by the Contracting Officer to correct the noncompliance and inform the Contracting Officer of the actions taken. The Contracting Officer may direct a different time period for the correction of noncompliances.
(3) If the Contractor refuses or fails to correct noncompliances within the time period specified by the Contracting Officer, the Government has the right to direct the Contractor to cease performance on all or part of this contract. The Contractor shall not resume performance until the Contracting Officer is satisfied that the corrective action was effective and the Contracting Officer so informs the Contractor.
(4) The Contracting Officer may remove Government personnel at any time the Contractor is in noncompliance with any safety requirement of this clause.
(5) If the direction to cease work or the removal of Government personnel results in increased costs to the Contractor, the Contractor shall not be entitled to an adjustment in the contract price or a change in the delivery or performance schedule unless the Contracting Officer later determines that the Contractor had in fact complied with the manual or schedule provisions. If the Contractor is entitled to an equitable adjustment, it shall be made in accordance with the Changes clause of this contract.
(d) Mishaps. If a mishap involving ammunition or explosives occurs, the Contractor shall—
(1) Notify the Contracting Officer immediately;
(2) Conduct an investigation in accordance with other provisions of this contract or as required by the Contracting Officer; and
(3) Submit a written report to the Contracting Officer.
(e) Contractor responsibility for safety.
(1) Nothing in this clause, nor any Government action or failure to act in surveillance of this contract, shall relieve the Contractor of its responsibility for the safety of—
(i) The Contractor's personnel and property;
(ii) The Government's personnel and property; or
(iii) The general public.
(2) Nothing in this clause shall relieve the Contractor of its responsibility for complying with applicable Federal, State, and local laws, ordinances, codes, and regulations (including those requiring the obtaining of licenses and permits) in connection with the performance of this contract.
(f) Contractor responsibility for contract performance.
(1) Neither the number or frequency of inspections performed by the Government, nor the degree of surveillance exercised by the Government, relieve the Contractor of its responsibility for contract performance.
(2) If the Government acts or fails to act in surveillance or enforcement of the safety requirements of this contract, this does not impose or add to any liability of the Government.
(g) Subcontractors.
(1) The Contractor shall insert this clause, including this paragraph (g), in every subcontract that involves ammunition or explosives.
(i) The clause shall include a provision allowing authorized Government safety representatives to evaluate subcontractor safety programs, implementation, and facilities as the Government determines necessary.
(ii) NOTE: The Government Contracting Officer or authorized representative shall notify the prime Contractor of all findings concerning subcontractor safety and compliance with the manual. The Contracting Officer or authorized representative may furnish copies to the subcontractor. The Contractor in turn shall communicate directly with the subcontractor, substituting its name for references to “the Government”. The Contractor and higher tier subcontractors shall also include provisions to allow direction to cease performance of the subcontract if a serious uncorrected or recurring safety deficiency potentially causes an imminent hazard to DoD personnel, property, or contract performance.
(2) The Contractor agrees to ensure that the subcontractor complies with all contract safety requirements. The Contractor will determine the best method for verifying the adequacy of the subcontractor's compliance.
(3) The Contractor shall ensure that the subcontractor understands and agrees to the Government's right to access to the subcontractor's facilities, personnel, and safety program documentation to perform safety surveys. The Government performs these safety surveys of subcontractor facilities solely to prevent the occurrence of any mishap which would endanger the safety of DoD personnel or otherwise adversely impact upon the Government's contractual interests.
(4) The Contractor shall notify the Contracting Officer or authorized representative before issuing any subcontract when it involves ammunition or explosives. If the proposed subcontract represents a change in the place of performance, the Contractor shall request approval for such change in accordance with the clause of this contract entitled “Change in Place of Performance--Ammunition and Explosives”.
(End of clause)
252.223-7003 Change in Place of Performance--Ammunition and Explosives.
As prescribed in 223.370-5, use the following clause:
CHANGE IN PLACE OF PERFORMANCE--AMMUNITION AND EXPLOSIVES (DEC 1991)
(a) The Offeror shall identify, in the “Place of Performance” provision of this solicitation, the place of performance of all ammunition and explosives work covered by the Safety Precautions for Ammunition and Explosives clause of this solicitation. Failure to furnish this information with the offer may result in rejection of the offer.
(b) The Offeror agrees not to change the place of performance of any portion of the offer covered by the Safety Precautions for Ammunition and Explosives clause contained in this solicitation after the date set for receipt of offers without the written approval of the Contracting Officer. The Contracting Officer shall grant approval only if there is enough time for the Government to perform the necessary safety reviews on the new proposed place of performance.
(c) If a contract results from this offer, the Contractor agrees not to change any place of performance previously cited without the advance written approval of the Contracting Officer.
(End of clause)
252.223-7004 Drug-Free Work Force.
As prescribed in 223.570-2, use the following clause:
DRUG-FREE WORK FORCE (SEP 1988)
(a) Definitions.
(1) “Employee in a sensitive position,” as used in this clause, means an employee who has been granted access to classified information; or employees in other positions that the Contractor determines involve national security, health or safety, or functions other than the foregoing requiring a high degree of trust and confidence.
(2) “Illegal drugs,” as used in this clause, means controlled substances included in Schedules I and II, as defined by section 802(6) of Title 21 of the United States Code, the possession of which is unlawful under Chapter 13 of that Title. The term “illegal drugs” does not mean the use of a controlled substance pursuant to a valid prescription or other uses authorized by law.
(b) The Contractor agrees to institute and maintain a program for achieving the objective of a drug-free work force. While this clause defines criteria for such a program, contractors are encouraged to implement alternative approaches comparable to the criteria in paragraph (c) that are designed to achieve the objectives of this clause.
(c) Contractor programs shall include the following, or appropriate alternatives:
(1) Employee assistance programs emphasizing high level direction, education, counseling, rehabilitation, and coordination with available community resources;
(2) Supervisory training to assist in identifying and addressing illegal drug use by Contractor employees;
(3) Provision for self-referrals as well as supervisory referrals to treatment with maximum respect for individual confidentiality consistent with safety and security issues;
(4) Provision for identifying illegal drug users, including testing on a controlled and carefully monitored basis. Employee drug testing programs shall be established taking account of the following:
(i) The Contractor shall establish a program that provides for testing for the use of illegal drugs by employees in sensitive positions. The extent of and criteria for such testing shall be determined by the Contractor based on considerations that include the nature of the work being performed under the contract, the employee's duties, the efficient use of Contractor resources, and the risks to health, safety, or national security that could result from the failure of an employee adequately to discharge his or her position.
(ii) In addition, the Contractor may establish a program for employee drug testing—
(A) When there is a reasonable suspicion that an employee uses illegal drugs; or
(B) When an employee has been involved in an accident or unsafe practice;
(C) As part of or as a follow-up to counseling or rehabilitation for illegal drug use;
(D) As part of a voluntary employee drug testing program.
(iii) The Contractor may establish a program to test applicants for employment for illegal drug use.
(iv) For the purpose of administering this clause, testing for illegal drugs may be limited to those substances for which testing is prescribed by section 2.1 of Subpart B of the “Mandatory Guidelines for Federal Workplace Drug Testing Programs” (53 FR 11980 (April 11, 1988)), issued by the Department of Health and Human Services.
(d) Contractors shall adopt appropriate personnel procedures to deal with employees who are found to be using drugs illegally. Contractors shall not allow any employee to remain on duty or perform in a sensitive position who is found to use illegal drugs until such time as the Contractor, in accordance with procedures established by the Contractor, determines that the employee may perform in such a position.
(e) The provisions of this clause pertaining to drug testing programs shall not apply to the extent they are inconsistent with state or local law, or with an existing collective bargaining agreement; provided that with respect to the latter, the Contractor agrees that those issues that are in conflict will be a subject of negotiation at the next collective bargaining session.
(End of clause)
252.223-7006 Prohibition on Storage, Treatment, and Disposal of Toxic or Hazardous Materials.
PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS—BASIC (SEP 2014)
(a) Definitions. As used in this clause—
“Storage” means a non-transitory, semi-permanent or permanent holding,
placement, or leaving of material. It does not include a temporary accumulation of a limited quantity of a material used in or a waste generated or resulting from authorized activities, such as servicing, maintenance, or repair of Department of Defense (DoD) items, equipment, or facilities.
“Toxic or hazardous materials” means—
(i) Materials referred to in section 101(14) of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) of 1980 (42 U.S.C. 9601(14)) and materials designated under section 102 of CERCLA (42 U.S.C. 9602) (40 CFR Part 302);
(ii) Materials that are of an explosive, flammable, or pyrotechnic nature; or
(iii) Materials otherwise identified by the Secretary of Defense as specified in DoD regulations.
(b) In accordance with 10 U.S.C. 2692, the Contractor is prohibited from storing, treating, or disposing of toxic or hazardous materials not owned by DoD on a DoD installation, except to the extent authorized by a statutory exception to 10 U.S.C. 2692 or as authorized by the Secretary of Defense. A charge may be assessed for any storage or disposal authorized under any of the exceptions to 10 U.S.C. 2692. If a charge is to be assessed, then such assessment shall be identified elsewhere in the contract with payment to the Government on a reimbursable cost basis.
(c) The Contractor shall include the substance of this clause, including this paragraph (c), in all subcontracts that require, may require, or permit a subcontractor access to a DoD installation, at any subcontract tier.
(End of clause)
Alternate I. As prescribed in 223.7106 and 223.7106(b), use the following clause, which adds a new paragraph (c) and revises and redesignates paragraph (c) of the basic clause as paragraph (d):
PROHIBITION ON STORAGE, TREATMENT, AND DISPOSAL OF TOXIC OR HAZARDOUS MATERIALS—ALTERNATE I (SEP 2014)
(a) Definitions. As used in this clause—
“Storage” means a non-transitory, semi-permanent or permanent holding, placement, or leaving of material. It does not include a temporary accumulation of a limited quantity of a material used in or a waste generated or resulting from authorized activities, such as servicing, maintenance, or repair of Department of Defense (DoD) items, equipment, or facilities.
“Toxic or hazardous materials” means—
(i) Materials referred to in section 101(14) of the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) of 1980 (42 U.S.C. 9601(14)) and materials designated under section 102 of CERCLA (42 U.S.C. 9602) (40 CFR Part 302);
(ii) Materials that are of an explosive, flammable, or pyrotechnic nature; or
(iii) Materials otherwise identified by the Secretary of Defense as specified in DoD regulations.
(b) In accordance with 10 U.S.C. 2692, the Contractor is prohibited from storing, treating, or disposing of toxic or hazardous materials not owned by DoD on a DoD installation, except to the extent authorized by a statutory exception to 10 U.S.C. 2692 or as authorized by the Secretary of Defense. A charge may be assessed for any storage or disposal authorized under any of the exceptions to 10 U.S.C. 2692. If a charge is to be assessed, then such assessment shall be identified elsewhere in the contract with payment to the Government on a reimbursable cost basis.
(c) With respect to treatment or disposal authorized pursuant to DFARS 223.7104(10) (10 U.S.C. 2692(b)(10), and notwithstanding any other provision of the contract, the Contractor assumes all financial and environmental responsibility and liability resulting from any treatment or disposal of toxic or hazardous materials not owned by DoD on a military installation. The Contractor shall indemnify, defend, and hold the Government harmless for all costs, liability, or penalties resulting from the Contractor’s treatment or disposal of toxic or hazardous materials not owned by DoD on a military installation.
(d) The Contractor shall include the substance of this clause, including this paragraph (d), in all subcontracts that require, may require, or permit a subcontractor access to a DoD installation, at any tier. Inclusion of the substance of this clause in subcontracts does not relieve the prime Contractor of liability to the Government under paragraph (c).
(End of clause)
252.223-7007 Safeguarding Sensitive Conventional Arms, Ammunition, and Explosives.
As prescribed in 223.7203, use the following clause:
SAFEGUARDING SENSITIVE CONVENTIONAL ARMS, AMMUNITION,
AND EXPLOSIVES (SEP 1999)
(a) Definition. “Arms, ammunition, and explosives (AA&E),” as used in this clause, means those items within the scope (chapter 1, paragraph B) of DoD 5100.76-M, Physical Security of Sensitive Conventional Arms, Ammunition, and Explosives.
(b) The requirements of DoD 5100.76-M apply to the following items of AA&E being developed, produced, manufactured, or purchased for the Government, or provided to the Contractor as Government-furnished property under this contract:
|
NOMENCLATURE |
NATIONAL |
SENSITIVITY/ |
(c) The Contractor shall comply with the requirements of DoD 5100.76-M, as specified in the statement of work. The edition of DoD 5100.76-M in effect on the date of issuance of the solicitation for this contract shall apply.
(d) The Contractor shall allow representatives of the Defense Security Service (DSS), and representatives of other appropriate offices of the Government, access at all reasonable times into its facilities and those of its subcontractors, for the purpose of performing surveys, inspections, and investigations necessary to review compliance with the physical security standards applicable to this contract.
(e) The Contractor shall notify the cognizant DSS field office of any subcontract involving AA&E within 10 days after award of the subcontract.
(f) The Contractor shall ensure that the requirements of this clause are included in all subcontracts, at every tier
(1) For the development, production, manufacture, or purchase of AA&E; or
(2) When AA&E will be provided to the subcontractor as Government-furnished property.
(g) Nothing in this clause shall relieve the Contractor of its responsibility for complying with applicable Federal, state, and local laws, ordinances, codes, and regulations (including requirements for obtaining licenses and permits) in connection with the performance of this contract.
(End of clause)
252.223-7008 Prohibition of Hexavalent Chromium.
As prescribed in 223.7306, use the following clause:
PROHIBITION OF HEXAVALENT CHROMIUM (JUN 2013)
(a) Definitions. As used in this clause—
“Homogeneous material” means a material that cannot be mechanically disjointed into different materials and is of uniform composition throughout.
(1) Examples of homogeneous materials include individual types of plastics, ceramics, glass, metals, alloys, paper, board, resins, and surface coatings.
(2) Homogeneous material does not include conversion coatings that chemically modify the substrate.
“Mechanically disjointed” means that the materials can, in principle, be separated by mechanical actions such as unscrewing, cutting, crushing, grinding, and abrasive processes.
(b) Prohibition.
(1) Unless otherwise specified by the Contracting Officer, the Contractor shall not provide any deliverable or construction material under this contract that—
(i) Contains hexavalent chromium in a concentration greater than 0.1 percent by weight in any homogenous material; or
(ii) Requires the removal or reapplication of hexavalent chromium materials during subsequent sustainment phases of the deliverable or construction material.
(2) This prohibition does not apply to hexavalent chromium produced as a by-product of manufacturing processes.
(c) If authorization for incorporation of hexavalent chromium in a deliverable or construction material is required, the Contractor shall submit a request to the Contracting Officer.
(d) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (d), in all subcontracts, including subcontracts for commercial items, that are for supplies, maintenance and repair services, or construction
materials.
(End of clause)
252.225-7000 Buy American--Balance of Payments Program Certificate.
Basic. As prescribed in 225.1101(1) and (1)(i), use the following provision:
BUY AMERICAN—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—BASIC (NOV 2014)
(a) Definitions. “Commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “foreign end product,” “qualifying country,” “qualifying country end product,” and “United States,” as used in this provision, have the meanings given in the Buy American and Balance of Payments Program—Basic clause of this solicitation.
(b) Evaluation. The Government—
(1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and
(2) Will evaluate offers of qualifying country end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program.
(c) Certifications and identification of country of origin.
(1) For all line items subject to the Buy American and Balance of Payments Program—Basic clause of this solicitation, the offeror certifies that—
(i) Each end product, except those listed in paragraphs (c)(2) or (3) of this provision, is a domestic end product; and
(ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.
(2) The offeror certifies that the following end products are qualifying country end products:
Line Item Number |
Country of Origin |
||
(3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:
Line Item Number |
Country of Origin (If known) |
||
(End of provision)
Alternate I. As prescribed in 225.1101(1) and (1)(ii), use the following provision, which adds “South Caucasus/Central and South Asian (SC/CASA) state” and “South Caucasus/Central and South Asian (SC/CASA) state end product” in paragraph (a), and replaces “qualifying country end products” in paragraphs (b)(2) and (c)(2) with “qualifying country end products or SC/CASA state end products”:
BUY AMERICAN—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—ALTERNATE I (NOV 2014)
(a) Definitions. “Commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “foreign end product,” “qualifying country,” “qualifying country end product,” “South Caucasus/Central and South Asian (SC/CASA) state,” “South Caucasus/Central and South Asian (SC/CASA) state end product,” and “United States,” as used in this provision, have the meanings given in the Buy American and Balance of Payments Program—Alternate I clause of this solicitation.
(b) Evaluation. The Government—
(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and
(2) Will evaluate offers of qualifying country end products or SC/CASA state end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program.
(c) Certifications and identification of country of origin.
(1) For all line items subject to the Buy American and Balance of Payments Program—Alternate I clause of this solicitation, the offeror certifies that—
(i) Each end product, except those listed in paragraphs (c)(2) or (3) of this provision, is a domestic end product; and
(ii) For end products other than COTS items, components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.
(2) The offeror certifies that the following end products are qualifying country end products or SC/CASA state end products:
Line Item Number |
Country of Origin |
||
(3) The following end products are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:
Line Item Number |
Country of Origin (If known) |
||
(End of provision)
252.225-7001 Buy American and Balance of Payments Program.
Basic. As prescribed in 225.1101(2)(i) and (2)(ii), use the following clause:
BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAM—BASIC (AUG 2016)
(a) Definitions. As used in this clause
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means an article, material, or supply incorporated directly into an end product.
“Domestic end product” means—
(i) An unmanufactured end product that has been mined or produced in the United States; or
(ii) An end product manufactured in the United States if—
(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—
(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or
(B) The end product is a COTS item.
“End product” means those articles, materials, and supplies to be acquired under this contract for public use.
“Foreign end product” means an end product other than a domestic end product.
“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.
“Qualifying country end product” means—
(i) An unmanufactured end product mined or produced in a qualifying country; or
(ii) An end product manufactured in a qualifying country if —
(A) The cost of the following types of components exceeds 50 percent of the cost of all its components:
(1) Components mined, produced, or manufactured in a qualifying country.
(2) Components mined, produced, or manufactured in the United States.
(3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(B) The end product is a COTS item.
“United States” means the 50 States, the District of Columbia, and outlying areas.
(b) This clause implements 41 U.S.C chapter 83, Buy American. In accordance with 41 U.S.C. 1907, the component test of the Buy American statute is waived for an end product that is a COTS item (see section 12.505(a)(1) of the Federal Acquisition Regulation). Unless otherwise specified, this clause applies to all line items in the contract.
(c) The Contractor shall deliver only domestic end products unless, in its offer, it specified delivery of other end products in the Buy AmericanBalance of Payments Program Certificate provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, the Contractor shall deliver a qualifying country end product or, at the Contractor’s option, a domestic end product.
(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.
(End of clause)
Alternate I. As prescribed in 225.1101(2)(i) and (2)(iii), use the following clause, which adds “South Caucasus/Central and South Asian (SC/CASA) state” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a), and uses different paragraphs (b) and (c) than the basic clause:
BUY AMERICAN AND BALANCE OF PAYMENTS PROGRAMALTERNATE I (AUG 2016)
(a) Definitions. As used in this clause
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means an article, material, or supply incorporated directly into an end product.
“Domestic end product” means—
(i) An unmanufactured end product that has been mined or produced in the United States; or
(ii) An end product manufactured in the United States if—
(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that—
(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or
(B) The end product is a COTS item.
“End product” means those articles, materials, and supplies to be acquired under this contract for public use.
“Foreign end product” means an end product other than a domestic end product.
“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.
“Qualifying country end product” means—
(i) An unmanufactured end product mined or produced in a qualifying country; or
(ii) An end product manufactured in a qualifying country if —
(A) The cost of the following types of components exceeds 50 percent of the cost of all its components:
(1) Components mined, produced, or manufactured in a qualifying country.
(2) Components mined, produced, or manufactured in the United States.
(3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(B) The end product is a COTS item.
“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.
“South Caucasus/Central and South Asian (SC/CASA) state end product” means an article that
(i) Is wholly the growth, product, or manufacture of an SC/CASA state; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“United States” means the 50 States, the District of Columbia, and outlying areas.
(b) This clause implements the Balance of Payments Program. Unless otherwise specified, this clause applies to all line items in the contract.
(c) The Contractor shall deliver only domestic end products unless, in its offer, it specified delivery of other end products in the Buy American Balance of Payments Program Certificate provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or an SC/CASA state end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, or, at the Contractor’s option, a domestic end product.
(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.
(End of clause)
252.225-7002 Qualifying Country Sources as Subcontractors.
As prescribed in 225.1101(3), use the following clause:
QUALIFYING COUNTRY SOURCES AS SUBCONTRACTORS (AUG 2016)
(a) Definition. “Qualifying country,” as used in this clause, means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
(b) Subject to the restrictions in section 225.872 of the Defense FAR Supplement, the Contractor shall not preclude qualifying country sources or U.S. sources from competing for subcontracts under this contract.
(End of clause)
252.225-7003 Report of Intended Performance Outside the United States and Canada—Submission with Offer.
As prescribed in 225.7204(a), use the following provision:
REPORT OF INTENDED PERFORMANCE OUTSIDE THE UNITED STATES AND CANADA—SUBMISSION WITH OFFER (OCT 2015)
(a) Definition. “United States,” as used in this provision, means the 50 States, the District of Columbia, and outlying areas.
(b) The offeror shall submit, with its offer, a report of intended performance outside the United States and Canada if—
(1) The offer exceeds $13.5 million in value; and
(2) The offeror is aware that the offeror or a first-tier subcontractor intends to perform any part of the contract outside the United States and Canada that—
(i) Exceeds $700,000 in value; and
(ii) Could be performed inside the United States or Canada.
(c) Information to be reported includes that for—
(1) Subcontracts;
(2) Purchases; and
(3) Intracompany transfers when transfers originate in a foreign location.
(d) The offeror shall submit the report using—
(1) DD Form 2139, Report of Contract Performance Outside the United States; or
(2) A computer-generated report that contains all information required by DD Form 2139.
(e) The offeror may obtain a copy of DD Form 2139 from the Contracting Officer or via the Internet at http://www.dtic.mil/whs/directives/infomgt/forms/formsprogram.htm.
(End of provision)
252.225-7004 Report of Intended Performance Outside the United States and Canada—Submission after Award.
As prescribed in 225.7204(b), use the following clause:
REPORT OF INTENDED PERFORMANCE OUTSIDE THE UNITED STATES AND CANADA—SUBMISSION AFTER AWARD (OCT 2015)
(a) Definition. “United States,” as used in this clause, means the 50 States, the District of Columbia, and outlying areas.
(b) Reporting requirement. The Contractor shall submit a report in accordance with this clause, if the Contractor or a first-tier subcontractor will perform any part of this contract outside the United States and Canada that—
(1) Exceeds $700,000 in value; and
(2) Could be performed inside the United States or Canada.
(c) Submission of reports. The Contractor—
(1) Shall submit a report as soon as practical after the information is known;
(2) To the maximum extent practicable, shall submit a report regarding a first-tier subcontractor at least 30 days before award of the subcontract;
(3) Need not resubmit information submitted with its offer, unless the information changes;
(4) Shall submit all reports to the Contracting Officer; and
(5) Shall submit a copy of each report to: Deputy Director of Defense Procurement and Acquisition Policy (Contract Policy and International Contracting), OUSD(AT&L) DPAP/CPIC, Washington, DC 20301-3060.
(d) Report format. The Contractor—
(1) Shall submit reports using—
(i) DD Form 2139, Report of Contract Performance Outside the United States; or
(ii) A computer-generated report that contains all information required by DD Form 2139; and
(2) May obtain copies of DD Form 2139 from the Contracting Officer or via the Internet at http://www.dtic.mil/whs/directives/infomgt/forms/formsprogram.htm.
(End of clause)
252.225-7005 Identification of Expenditures in the United States.
As prescribed in 225.1103(1), use the following clause:
IDENTIFICATION OF EXPENDITURES IN THE UNITED STATES (JUN 2005)
(a) Definition. “United States,” as used in this clause, means the 50 States, the District of Columbia, and outlying areas.
(b) This clause applies only if the Contractor is—
(1) A concern incorporated in the United States (including a subsidiary that is incorporated in the United States, even if the parent corporation is not incorporated in the United States); or
(2) An unincorporated concern having its principal place of business in the United States.
(c) On each invoice, voucher, or other request for payment under this contract, the Contractor shall identify that part of the requested payment that represents estimated expenditures in the United States. The identification—
(1) May be expressed either as dollar amounts or as percentages of the total amount of the request for payment;
(2) Should be based on reasonable estimates; and
(3) Shall state the full amount of the payment requested, subdivided into the following categories:
(i) U.S. products—expenditures for material and equipment manufactured or produced in the United States, including end products, components, or construction material, but excluding transportation;
(ii) U.S. services—expenditures for services performed in the United States, including all charges for overhead, other indirect costs, and profit under construction or service contracts;
(iii) Transportation on U.S. carriers—expenditures for transportation furnished by U.S. flag, ocean, surface, and air carriers; and
(iv) Expenditures not identified under paragraphs (c)(3)(i) through (iii) of this clause.
(d) Nothing in this clause requires the establishment or maintenance of detailed accounting records or gives the U.S. Government any right to audit the Contractor's books or records.
(End of clause)
252.225-7006 Acquisition of the American Flag.
As prescribed in 225.7002-3(c), insert the following clause:
ACQUISITION OF THE AMERICAN FLAG (AUG 2015)
(a) Definition. “United States,” as used in this clause, means the 50 States, the District of Columbia, and outlying areas.
(b) If the Contractor is required to deliver under this contract one or more American flags (Product or Service Code 8345), such flag(s), including the materials and components thereof, shall be manufactured in the United States, consistent with the requirements at 10 U.S.C. 2533a (commonly known as the “Berry Amendment”).
(c) This clause does not apply to the acquisition of any end items or components related to flying or displaying the flag (e.g., flagpoles and accessories).
(End of clause)
252.225-7007 Prohibition on Acquisition of United States Munitions List Items from Communist Chinese Military Companies.
As prescribed in 225.1103(4), use the following clause:
PROHIBITION ON ACQUISITION OF UNITED STATES MUNITIONS LIST ITEMS FROM COMMUNIST CHINESE MILITARY COMPANIES (SEP 2006)
(a) Definitions. As used in this clause—
“Communist Chinese military company” means any entity that is—
(1) A part of the commercial or defense industrial base of the People’s Republic of China; or
(2) Owned or controlled by, or affiliated with, an element of the Government or armed forces of the People’s Republic of China.
“United States Munitions List” means the munitions list of the International Traffic in Arms Regulation in 22 CFR Part 121.
(b) Any supplies or services covered by the United States Munitions List that are delivered under this contract may not be acquired, directly or indirectly, from a Communist Chinese military company.
(c) The Contractor shall insert the substance of this clause, including this paragraph (c), in all subcontracts for items covered by the United States Munitions List.
(End of clause)
252.225-7008 Restriction on Acquisition of Specialty Metals.
As prescribed in 225.7003-5(a)(1), use the following clause:
RESTRICTION ON ACQUISITION OF SPECIALTY METALS (MAR 2013)
(a) Definitions. As used in this clause—
“Alloy” means a metal consisting of a mixture of a basic metallic element and one or more metallic, or non-metallic, alloying elements.
(i) For alloys named by a single metallic element (e.g., titanium alloy), it means that the alloy contains 50 percent or more of the named metal (by mass).
(ii) If two metals are specified in the name (e.g, nickel-iron alloy), those metals are the two predominant elements in the alloy, and together they constitute 50 percent or more of the alloy (by mass).
“Produce” means—
(i) Atomization;
(ii) Sputtering; or
(iii) Final consolidation of non-melt derived metal powders.
“Specialty metal” means—
(i) Steel—
(A) With a maximum alloy content exceeding one or more of the following limits: manganese, 1.65 percent; silicon, 0.60 percent; or copper, 0.60 percent; or
(B) Containing more than 0.25 percent of any of the following elements: aluminum, chromium, cobalt, molybdenum, nickel, niobium (columbium), titanium, tungsten, or vanadium;
(ii) Metal alloys consisting of—
(A) Nickel or iron-nickel alloys that contain a total of alloying metals other than nickel and iron in excess of 10 percent; or
(B) Cobalt alloys that contain a total of alloying metals other than cobalt and iron in excess of 10 percent;
(iii) Titanium and titanium alloys; or
(iv) Zirconium and zirconium alloys.
“Steel” means an iron alloy that includes between .02 and 2 percent carbon and may include other elements.
(b) Any specialty metal delivered under this contract shall be melted or produced in the United States or its outlying areas.
(End of clause)
252.225-7009 Restriction on Acquisition of Certain Articles Containing Specialty Metals.
As prescribed in 225.7003-5(a)(2), use the following clause:
RESTRICTION ON ACQUISITION OF CERTAIN ARTICLES CONTAINING
SPECIALTY METALS (OCT 2014)
(a) Definitions. As used in this clause—
“Alloy” means a metal consisting of a mixture of a basic metallic element and one or more metallic, or non-metallic, alloying elements.
(i) For alloys named by a single metallic element (e.g., titanium alloy), it means that the alloy contains 50 percent or more of the named metal (by mass).
(ii) If two metals are specified in the name (e.g, nickel-iron alloy), those metals are the two predominant elements in the alloy, and together they constitute 50 percent or more of the alloy (by mass).
“Assembly” means an item forming a portion of a system or subsystem that—
(i) Can be provisioned and replaced as an entity; and
(ii) Incorporates multiple, replaceable parts.
“Commercial derivative military article” means an item acquired by the Department of Defense that is or will be produced using the same production facilities, a common supply chain, and the same or similar production processes that are used for the production of articles predominantly used by the general public or by nongovernmental entities for purposes other than governmental purposes.
“Commercially available off-the-shelf item”—
(i) Means any item of supply that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under this contract or a subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means any item supplied to the Government as part of an end item or of another component.
“Electronic component” means an item that operates by controlling the flow of electrons or other electrically charged particles in circuits, using interconnections of electrical devices such as resistors, inductors, capacitors, diodes, switches, transistors, or integrated circuits. The term does not include structural or mechanical parts of an assembly containing an electronic component, and does not include any high performance magnets that may be used in the electronic component.
“End item” means the final production product when assembled or completed and ready for delivery under a line item of this contract.
“High performance magnet” means a permanent magnet that obtains a majority of its magnetic properties from rare earth metals (such as samarium).
“Produce” means—
(i) Atomization;
(ii) Sputtering; or
(iii) Final consolidation of non-melt derived metal powders.
“Qualifying country” means any country listed in the definition of “Qualifying country” at 225.003 of the Defense Federal Acquisition Regulation
Supplement (DFARS).
“Required form” means in the form of mill product, such as bar, billet, wire, slab, plate, or sheet, and in the grade appropriate for the production of—
(i) A finished end item to be delivered to the Government under this contract; or
(ii) A finished component assembled into an end item to be delivered to the Government under this contract.
“Specialty metal” means—
(i) Steel—
(A) With a maximum alloy content exceeding one or more of the following limits: manganese, 1.65 percent; silicon, 0.60 percent; or copper, 0.60 percent; or
(B) Containing more than 0.25 percent of any of the following elements: aluminum, chromium, cobalt, molybdenum, nickel, niobium (columbium), titanium, tungsten, or vanadium;
(ii) Metal alloys consisting of—
(A) Nickel or iron-nickel alloys that contain a total of alloying metals other than nickel and iron in excess of 10 percent; or
(B) Cobalt alloys that contain a total of alloying metals other than cobalt and iron in excess of 10 percent;
(iii) Titanium and titanium alloys; or
(iv) Zirconium and zirconium alloys.
“Steel” means an iron alloy that includes between .02 and 2 percent carbon and may include other elements.
“Subsystem” means a functional grouping of items that combine to perform a major function within an end item, such as electrical power, attitude control, and propulsion.
(b) Restriction. Except as provided in paragraph (c) of this clause, any specialty metals incorporated in items delivered under this contract shall be melted or produced in the United States, its outlying areas, or a qualifying country.
(c) Exceptions. The restriction in paragraph (b) of this clause does not apply to—
(1) Electronic components.
(2)(i) Commercially available off-the-shelf (COTS) items, other than—
(A) Specialty metal mill products, such as bar, billet, slab, wire, plate, or sheet, that have not been incorporated into COTS end items, subsystems, assemblies, or components;
(B) Forgings or castings of specialty metals, unless the forgings or castings are incorporated into COTS end items, subsystems, or assemblies;
(C) Commercially available high performance magnets that contain specialty metal, unless such high performance magnets are incorporated into COTS end items or subsystems; and
(D) COTS fasteners, unless—
(1) The fasteners are incorporated into COTS end items, subsystems, assemblies, or components; or
(2) The fasteners qualify for the commercial item exception in paragraph (c)(3) of this clause.
(ii) A COTS item is considered to be “without modification” if it is not modified prior to contractual acceptance by the next higher tier in the supply chain.
(A) Specialty metals in a COTS item that was accepted without modification by the next higher tier are excepted from the restriction in paragraph (b) of this clause, and remain excepted, even if a piece of the COTS item subsequently is removed (e.g., the end is removed from a COTS screw or an extra hole is drilled in a COTS bracket).
(B) Specialty metals that were not contained in a COTS item upon acceptance, but are added to the COTS item after acceptance, are subject to the restriction in paragraph (b) of this clause (e.g., a special reinforced handle made of specialty metal is added to a COTS item).
(C) If two or more COTS items are combined in such a way that the resultant item is not a COTS item, only the specialty metals involved in joining the COTS items together are subject to the restriction in paragraph (b) of this clause (e.g., a COTS aircraft is outfitted with a COTS engine that is not the COTS engine normally provided with the aircraft).
(D) For COTS items that are normally sold in the commercial marketplace with various options, items that include such options are also COTS items. However, if a COTS item is offered to the Government with an option that is not normally offered in the commercial marketplace, that option is subject to the restriction in paragraph (b) of this clause (e.g. - An aircraft is normally sold to the public with an option for installation kits. The Department of Defense requests a military-unique kit. The aircraft is still a COTS item, but the military-unique kit is not a COTS item and must comply with the restriction in paragraph (b) of this clause unless another exception applies).
(3) Fasteners that are commercial items, if the manufacturer of the fasteners certifies it will purchase, during the relevant calendar year, an amount of domestically melted or produced specialty metal, in the required form, for use in the production of fasteners for sale to the Department of Defense and other customers, that is not less than 50 percent of the total amount of the specialty metal that it will purchase to carry out the production of such fasteners for all customers.
(4) Items manufactured in a qualifying country.
(5) Specialty metals for which the Government has determined in accordance with DFARS 225.7003-3 that specialty metal melted or produced in the United States, its outlying areas, or a qualifying country cannot be acquired as and when needed in—
(i) A satisfactory quality;
(ii) A sufficient quantity; and
(iii) The required form.
(6) End items containing a minimal amount of otherwise noncompliant specialty metals (i.e., specialty metals not melted or produced in the United States, an outlying area, or a qualifying country, that are not covered by one of the other exceptions in this paragraph (c)), if the total weight of such noncompliant metals does not exceed 2 percent of the total weight of all specialty metals in the end item, as estimated in good faith by the Contractor. This exception does not apply to high performance magnets containing specialty metals.
(d) Compliance for commercial derivative military articles.
(1) As an alternative to the compliance required in paragraph (b) of this clause, the Contractor may purchase an amount of domestically melted or produced specialty metals in the required form, for use during the period of contract performance in the production of the commercial derivative military article and the related commercial article, if—
(i) The Contracting Officer has notified the Contractor of the items to be delivered under this contract that have been determined by the Government to meet the definition of “commercial derivative military article”; and
(ii) For each item that has been determined by the Government to meet the definition of “commercial derivative military article,” the Contractor has certified, as specified in the provision of the solicitation entitled “Commercial Derivative Military Article—Specialty Metals Compliance Certificate” (DFARS 252.225-7010), that the Contractor and its subcontractor(s) will enter into a contractual agreement or agreements to purchase an amount of domestically melted or produced specialty metal in the required form, for use during the period of contract performance in the production of each commercial derivative military article and the related commercial article, that is not less than the Contractor’s good faith estimate of the greater of—
(A) An amount equivalent to 120 percent of the amount of specialty metal that is required to carry out the production of the commercial derivative military article (including the work performed under each subcontract); or
(B) An amount equivalent to 50 percent of the amount of specialty metal that will be purchased by the Contractor and its subcontractors for use during such period in the production of the commercial derivative military article and the related commercial article.
(2) For the purposes of this alternative, the amount of specialty metal that is required to carry out production of the commercial derivative military article includes specialty metal contained in any item, including COTS items.
(e) Subcontracts.
(1) The Contractor shall exclude and reserve paragraph (d) and this paragraph (e)(1) when flowing down this clause to subcontracts.
(2) The Contractor shall insert paragraphs (a) through (c) and this paragraph (e)(2) of this clause in subcontracts, including subcontracts for commercial items, that are for items containing specialty metals to ensure compliance of the end products that the Contractor will deliver to the Government. When inserting this clause in subcontracts, the Contractor shall—
(i) Modify paragraph (c)(6) of this clause only as necessary to facilitate management of the minimal content exception at the prime contract level. The minimal content exception does not apply to specialty metals contained in high-performance magnets; and
(ii) Not further alter the clause other than to identify the appropriate parties.
(End of clause)
252.225-7010 Commercial Derivative Military Article—Specialty Metals Compliance Certificate.
As prescribed in 225.7003-5(b), use the following provision:
COMMERCIAL DERIVATIVE MILITARY ARTICLE—SPECIALTY METALS COMPLIANCE CERTIFICATE (JUL 2009)
(a) Definitions. “Commercial derivative military article,” “commercially available off-the-shelf item,” “produce,” “required form,” and “specialty metal,” as used in this provision, have the meanings given in the clause of this solicitation entitled “Restriction on Acquisition of Certain Articles Containing Specialty Metals” (DFARS 252.225-7009).
(b) The offeror shall list in this paragraph any commercial derivative military articles it intends to deliver under any contract resulting from this solicitation using the alternative compliance for commercial derivative military articles, as specified in paragraph (d) of the clause of this solicitation entitled “Restriction on Acquisition of Certain Articles Containing Specialty Metals” (DFARS 252.225-7009). The offeror’s designation of an item as a “commercial derivative military article” will be subject to Government review and approval.
____________________________________________________________
____________________________________________________________.
(c) If the offeror has listed any commercial derivative military articles in paragraph (b) of this provision, the offeror certifies that, if awarded a contract as a result of this solicitation, and if the Government approves the designation of the listed item(s) as commercial derivative military articles, the offeror and its subcontractor(s) will demonstrate that individually or collectively they have entered into a contractual agreement or agreements to purchase an amount of domestically melted or produced specialty metal in the required form, for use during the period of contract performance in the production of each commercial derivative military article and the related commercial article, that is not less than the Contractor’s good faith estimate of the greater of—
(1) An amount equivalent to 120 percent of the amount of specialty metal that is required to carry out the production of the commercial derivative military article (including the work performed under each subcontract); or
(2) An amount equivalent to 50 percent of the amount of specialty metal that will be purchased by the Contractor and its subcontractors for use during such period in the production of the commercial derivative military article and the related commercial article.
(d) For the purposes of this provision, the amount of specialty metal that is required to carry out the production of the commercial derivative military article includes specialty metal contained in any item, including commercially available off-the-shelf items, incorporated into such commercial derivative military articles.
(End of provision)
252.225-7011 Restriction on Acquisition of Supercomputers.
As prescribed in 225.7012-3, use the following clause:
RESTRICTION ON ACQUISITION OF SUPERCOMPUTERS (JUN 2005)
Supercomputers delivered under this contract shall be manufactured in the United States or its outlying areas.
(End of clause)
252.225-7012 Preference for Certain Domestic Commodities.
As prescribed in 225.7002-3(a), use the following clause:
PREFERENCE FOR CERTAIN DOMESTIC COMMODITIES (AUG 2016)
(a) Definitions. As used in this clause—
“Component” means any item supplied to the Government as part of an end product or of another component.
“End product” means supplies delivered under a line item of this contract.
"Qualifying country" means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
“Structural component of a tent”—
(i) Means a component that contributes to the form and stability of the tent (e.g., poles, frames, flooring, guy ropes, pegs);
(ii) Does not include equipment such as heating, cooling, or lighting.
“United States” means the 50 States, the District of Columbia, and outlying areas.
“U.S.-flag vessel” means a vessel of the United States or belonging to the United States, including any vessel registered or having national status under the laws of the United States.
(b) The Contractor shall deliver under this contract only such of the following items, either as end products or components, that have been grown, reprocessed, reused, or produced in the United States:
(1) Food.
(2) Clothing and the materials and components thereof, other than sensors, electronics, or other items added to, and not normally associated with, clothing and the materials and components thereof. Clothing includes items such as outerwear, headwear, underwear, nightwear, footwear, hosiery, handwear, belts, badges, and insignia.
(3)(i) Tents and structural components of tents;
(ii) Tarpaulins; or
(iii) Covers.
(4) Cotton and other natural fiber products.
(5) Woven silk or woven silk blends.
(6) Spun silk yarn for cartridge cloth.
(7) Synthetic fabric, and coated synthetic fabric, including all textile fibers and yarns that are for use in such fabrics.
(8) Canvas products.
(9) Wool (whether in the form of fiber or yarn or contained in fabrics, materials, or manufactured articles).
(10) Any item of individual equipment (Federal Supply Class 8465) manufactured from or containing fibers, yarns, fabrics, or materials listed in this paragraph (b).
(c) This clause does not apply—
(1) To items listed in section 25.104(a) of the Federal Acquisition Regulation (FAR), or other items for which the Government has determined that a satisfactory quality and sufficient quantity cannot be acquired as and when needed at U.S. market prices;
(2) To incidental amounts of cotton, other natural fibers, or wool incorporated in an end product, for which the estimated value of the cotton, other natural fibers, or wool—
(i) Is not more than 10 percent of the total price of the end product; and
(ii) Does not exceed the simplified acquisition threshold in FAR Part 2;
(3) To waste and byproducts of cotton or wool fiber for use in the production of propellants and explosives;
(4) To foods, other than fish, shellfish, or seafood, that have been manufactured or processed in the United States, regardless of where the foods (and any component if applicable) were grown or produced. Fish, shellfish, or seafood manufactured or processed in the United States and fish, shellfish, or seafood contained in foods manufactured or processed in the United States shall be provided in accordance with paragraph (d) of this clause;
(5) To chemical warfare protective clothing produced in a qualifying country; or
(6) To fibers and yarns that are for use in synthetic fabric or coated synthetic fabric (but does apply to the synthetic or coated synthetic fabric itself), if—
(i) The fabric is to be used as a component of an end product that is not a textile product. Examples of textile products, made in whole or in part of fabric, include
(A) Draperies, floor coverings, furnishings, and bedding (Federal Supply Group 72, Household and Commercial Furnishings and Appliances);
(B) Items made in whole or in part of fabric in Federal Supply Group 83, Textile/leather/furs/apparel/findings/tents/flags, or Federal Supply Group 84, Clothing, Individual Equipment and Insignia;
(C) Upholstered seats (whether for household, office, or other use); and
(D) Parachutes (Federal Supply Class 1670); or
(ii) The fibers and yarns are para-aramid fibers and continuous filament para-aramid yarns manufactured in a qualifying country.
(d)(1) Fish, shellfish, and seafood delivered under this contract, or contained in foods delivered under this contract—
(i) Shall be taken from the sea by U.S.-flag vessels; or
(ii) If not taken from the sea, shall be obtained from fishing within the United States; and
(2) Any processing or manufacturing of the fish, shellfish, or seafood shall be performed on a U.S.-flag vessel or in the United States.
(End of clause)
As prescribed in 225.1101(4), use the following clause:
DUTY-FREE ENTRY (MAY 2016)
(a) Definitions. As used in this clause—
“Component,” means any item supplied to the Government as part of an end product or of another component.
“Customs territory of the United States” means the 50 States, the District of Columbia, and Puerto Rico.
“Eligible product” means—
(i) “Designated country end product,” as defined in the Trade Agreements (either basic or alternate) clause of this contract;
(ii) “Free Trade Agreement country end product,” other than a “Bahrainian end product,” a “Moroccan end product,” a Panamanian end product,” or a “Peruvian end product,” as defined in the Buy American—Free Trade Agreements—Balance of Payments Program (either basic or alternate II) clause of this contract, basic or its Alternate II;
(iii) “Canadian end product,” as defined in the Buy American—Free Trade Agreements—Balance of Payments Program (either alternate I or alternate III) clause of this Contract; or
(iv) “Free Trade Agreement country end product” other than a “Bahrainian end product,” “Korean end product,” “Moroccan end product,” “Panamanian end product,” or “Peruvian end product,” as defined in of the Buy American—Free Trade Agreements—Balance of Payments Program (either alternate IV or alternate V) clause of this contract.
“Qualifying country” and “qualifying country end product” have the meanings given in the Trade Agreements clause, the Buy American and Balance of Payments Program clause, or the Buy American—Free Trade Agreements—Balance of Payments Program clause of this contract, basic or alternate.
(b) Except as provided in paragraph (i) of this clause, or unless supplies were imported into the customs territory of the United States before the date of this contract or the applicable subcontract, the price of this contract shall not include any amount for duty on—
(1) End items that are eligible products or qualifying country end products;
(2) Components (including, without limitation, raw materials and intermediate assemblies) produced or made in qualifying countries, that are to be incorporated in U.S.- made end products to be delivered under this contract; or
(3) Other supplies for which the Contractor estimates that duty will exceed $300 per shipment into the customs territory of the United States.
(c) The Contractor shall—
(1) Claim duty-free entry only for supplies that the Contractor intends to deliver to the Government under this contract, either as end items or components of end items; and
(2) Pay duty on supplies, or any portion thereof, that are diverted to nongovernmental use, other than—
(i) Scrap or salvage; or
(ii) Competitive sale made, directed, or authorized by the Contracting Officer.
(d) Except as the Contractor may otherwise agree, the Government will execute duty-free entry certificates and will afford such assistance as appropriate to obtain the duty-free entry of supplies—
(1) For which no duty is included in the contract price in accordance with paragraph (b) of this clause; and
(2) For which shipping documents bear the notation specified in paragraph (e) of this clause.
(e) For foreign supplies for which the Government will issue duty-free entry certificates in accordance with this clause, shipping documents submitted to Customs shall—
(1) Consign the shipments to the appropriate—
(i) Military department in care of the Contractor, including the Contractor's delivery address; or
(ii) Military installation; and
(2) Include the following information:
(i) Prime contract number and, if applicable, delivery order number.
(ii) Number of the subcontract for foreign supplies, if applicable.
(iii) Identification of the carrier.
(iv)(A) For direct shipments to a U.S. military installation, the notation: “UNITED STATES GOVERNMENT, DEPARTMENT OF DEFENSE Duty-Free Entry to be claimed pursuant to Section XXII, Chapter 98, Subchapter VIII, Item 9808.00.30 of the Harmonized Tariff Schedule of the United States. Upon arrival of shipment at the appropriate port of entry, District Director of Customs, please release shipment under 19 CFR Part 142 and notify Commander, Defense Contract Management Agency (DCMA) New York, ATTN: Customs Team, DCMAE-GNTF, 207 New York Avenue, Staten Island, New York, 10305-5013, for execution of Customs Form 7501, 7501A, or 7506 and any required duty-free entry certificates.”
(B) If the shipment will be consigned to other than a military installation, e.g., a domestic contractor's plant, the shipping document notation shall be altered to include the name and address of the contractor, agent, or broker who will notify Commander, DCMA New York, for execution of the duty-free entry certificate. (If the shipment will be consigned to a contractor’s plant and no duty-free entry certificate is required due to a trade agreement, the Contractor shall claim duty-free entry under the applicable trade agreement and shall comply with the U.S. Customs Service requirements. No notification to Commander, DCMA New York, is required.)
(v) Gross weight in pounds (if freight is based on space tonnage, state cubic feet in addition to gross shipping weight).
(vi) Estimated value in U.S. dollars.
(vii) Activity address number of the contract administration office administering the prime contract, e.g., for DCMA Dayton, S3605A.
(f) Preparation of customs forms.
(1)(i) Except for shipments consigned to a military installation, the Contractor shall—
(A) Prepare any customs forms required for the entry of foreign supplies into the customs territory of the United States in connection with this contract; and
(B) Submit the completed customs forms to the District Director of Customs, with a copy to DCMA NY for execution of any required duty-free entry certificates.
(ii) Shipments consigned directly to a military installation will be released in accordance with sections 10.101 and 10.102 of the U.S. Customs regulations.
(2) For shipments containing both supplies that are to be accorded duty-free entry and supplies that are not, the Contractor shall identify on the customs forms those items that are eligible for duty-free entry.
(g) The Contractor shall—
(1) Prepare (if the Contractor is a foreign supplier), or shall instruct the foreign supplier to prepare, a sufficient number of copies of the bill of lading (or other shipping document) so that at least two of the copies accompanying the shipment will be available for use by the District Director of Customs at the port of entry;
(2) Consign the shipment as specified in paragraph (e) of this clause; and
(3) Mark on the exterior of all packages—
(i) “UNITED STATES GOVERNMENT, DEPARTMENT OF DEFENSE”; and
(ii) The activity address number of the contract administration office administering the prime contract.
(h) The Contractor shall notify the Administrative Contracting Officer (ACO) in writing of any purchase of eligible products or qualifying country supplies to be accorded duty-free entry, that are to be imported into the customs territory of the United States for delivery to the Government or for incorporation in end items to be delivered to the Government. The Contractor shall furnish the notice to the ACO immediately upon award to the supplier and shall include in the notice—
(1) The Contractor’s name, address, and Commercial and Government Entity (CAGE) code;
(2) Prime contract number and, if applicable, delivery order number;
(3) Total dollar value of the prime contract or delivery order;
(4) Date of the last scheduled delivery under the prime contract or delivery order;
(5) Foreign supplier's name and address;
(6) Number of the subcontract for foreign supplies;
(7) Total dollar value of the subcontract for foreign supplies;
(8) Date of the last scheduled delivery under the subcontract for foreign supplies;
(9) List of items purchased;
(10) An agreement that the Contractor will pay duty on supplies, or any portion thereof, that are diverted to nongovernmental use other than—
(i) Scrap or salvage; or
(ii) Competitive sale made, directed, or authorized by the Contracting Officer;
(11) Country of origin; and
(12) Scheduled delivery date(s).
(i) This clause does not apply to purchases of eligible products or qualifying country supplies in connection with this contract if—
(1) The supplies are identical in nature to supplies purchased by the Contractor or any subcontractor in connection with its commercial business; and
(2) It is not economical or feasible to account for such supplies so as to ensure that the amount of the supplies for which duty-free entry is claimed does not exceed the amount purchased in connection with this contract.
(j) The Contractor shall—
(1) Insert the substance of this clause, including this paragraph (j), in all subcontracts for—
(i) Qualifying country components; or
(ii) Nonqualifying country components for which the Contractor estimates that duty will exceed $200 per unit;
(2) Require subcontractors to include the number of this contract on all shipping documents submitted to Customs for supplies for which duty-free entry is claimed pursuant to this clause; and
(3) Include in applicable subcontracts—
(i) The name and address of the ACO for this contract;
(ii) The name, address, and activity address number of the contract administration office specified in this contract; and
(iii) The information required by paragraphs (h)(1), (2), and (3) of this clause.
(End of clause)
252.225-7015 Restriction on Acquisition of Hand or Measuring Tools.
As prescribed in 225.7002-3(b), use the following clause:
RESTRICTION ON ACQUISITION OF HAND OR MEASURING TOOLS (JUN 2005)
Hand or measuring tools delivered under this contract shall be produced in the United States or its outlying areas.
(End of clause)
252.225-7016 Restriction on Acquisition of Ball and Roller Bearings.
As prescribed in 225.7009-5, use the following clause:
RESTRICTION ON ACQUISITION OF BALL AND ROLLER BEARINGS (JUN 2011)
(a) Definitions. As used in this clause
(1) “Bearing components” means the bearing element, retainer, inner race, or outer race.
(2) “Component,” other than a bearing component, means any item supplied to the Government as part of an end product or of another component.
(3) “End product” means supplies delivered under a line item of this contract.
(b) Except as provided in paragraph (c) of this clause—
(1) Each ball and roller bearing delivered under this contract shall be manufactured in the United States, its outlying areas, or Canada; and
(2) For each ball or roller bearing, the cost of the bearing components manufactured in the United States, its outlying areas, or Canada shall exceed 50 percent of the total cost of the bearing components of that ball or roller bearing.
(c) The restriction in paragraph (b) of this clause does not apply to ball or roller bearings that are acquired as—
(1) Commercial components of a noncommercial end product; or
(2) Commercial or noncommercial components of a commercial component of a noncommercial end product.
(d) The restriction in paragraph (b) of this clause may be waived upon request from the Contractor in accordance with subsection 225.7009-4 of the Defense Federal Acquisition Regulation Supplement.
(e) If this contract includes DFARS clause 252.225-7009, Restriction on Acquisition of Certain Articles Containing Specialty Metals, all bearings that contain specialty metals, as defined in that clause, must meet the requirements of that clause.
(f) The Contractor shall insert the substance of this clause, including this paragraph (f), in all subcontracts, except those for
(1) Commercial items; or
(2) Items that do not contain ball or roller bearings.
(End of clause)
252.225-7017 Photovoltaic Devices.
As prescribed in 225.7017-5(a), use the following clause:
PHOTOVOLTAIC DEVICES (SEP 2016)
(a) Definitions. As used in this clause
“Bahrainian photovoltaic device” means a photovoltaic device that—
(i) Is wholly manufactured in Bahrain; or
(ii) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of Bahrain.
“Canadian photovoltaic device” means a photovoltaic device that has been substantially transformed in Canada into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of Canada.
“Caribbean Basin country photovoltaic device” means a photovoltaic device that
(i) Is wholly manufactured in a Caribbean Basin country; or
(ii) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of a Caribbean Basin country.
“Designated country” means—
(i) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);
(ii) A Free Trade Agreement country (Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);
(iii) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or
(iv) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).
“Designated country photovoltaic device” means a WTO GPA country photovoltaic device, a Free Trade Agreement country photovoltaic device, a least developed country photovoltaic device, or a Caribbean Basin country photovoltaic device.
“Domestic photovoltaic device” means a photovoltaic device that—
(i) Is manufactured in the United States; and
(ii) The cost of its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic.
“Foreign photovoltaic device” means a photovoltaic device other than a domestic photovoltaic device.
“Free Trade Agreement country” means Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore.
“Free Trade Agreement country photovoltaic device” means a photovoltaic device that—
(i) Is wholly manufactured in a Free Trade Agreement country; or
(ii) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of a Free Trade Agreement country.
“Korean photovoltaic device” means a photovoltaic device that—
(i) Is wholly manufactured in Korea (Republic of); or
(ii) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in Korea (Republic of) into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of Korea (Republic of).
“Least developed country photovoltaic device” means a photovoltaic device that—
(i) Is wholly manufactured in a least developed country; or
(ii) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of a least developed country.
“Moroccan photovoltaic device” means a photovoltaic device that—
(i) Is wholly manufactured in Morocco; or
(ii) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of Morocco.
“Panamanian photovoltaic device” means a photovoltaic device that—
(i) Is wholly manufactured in Panama; or
(ii) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of Panama.
“Peruvian photovoltaic device” means a photovoltaic device that—
(i) Is wholly manufactured in Peru; or
(ii) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of Peru.
"Photovoltaic device" means a device that converts light directly into electricity through a solid-state, semiconductor process.
“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
“Qualifying country photovoltaic device” means a photovoltaic device manufactured in a qualifying country.
“United States” means the 50 States, the District of Columbia, and outlying areas.
“U.S.-made photovoltaic device” means a photovoltaic device that
(i) Is manufactured in the United States; or
(ii) Is substantially transformed in the United States into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of the United States.
“WTO GPA country photovoltaic device” means a photovoltaic device that
(i) Is wholly manufactured in a WTO GPA country; or
(ii) In the case of a photovoltaic device that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed, provided that the photovoltaic device is not subsequently substantially transformed outside of a WTO GPA country.
(b) This clause implements section 858 of the National Defense Authorization Act for Fiscal Year 2015 (Pub. L. 113-291).
(c) Restriction. If the Contractor specified in its offer in the Photovoltaic Devices—Certificate provision of the solicitation that the estimated value of the photovoltaic devices to be utilized in performance of this contract would be—
(1) Less than $25,000, then the Contractor shall utilize only domestic photovoltaic devices unless, in its offer, it specified utilization of qualifying country or other foreign photovoltaic devices in paragraph (d)(2) of the Photovoltaic Devices—Certificate provision of the solicitation. If the Contractor certified in its offer that it will utilize a qualifying country photovoltaic device, then the Contractor shall utilize a qualifying country photovoltaic device as specified, or, at the Contractor’s option, a domestic photovoltaic device;
(2) $25,000 or more but less than $77,533, then the Contractor shall utilize in the performance of this contract only domestic photovoltaic devices unless, in its offer, it specified utilization of Canadian, qualifying country, or other foreign photovoltaic devices in paragraph (d)(3) of the Photovoltaic Devices—Certificate provision of the solicitation. If the Contractor certified in its offer that it will utilize a qualifying country photovoltaic device or a Canadian photovoltaic device, then the Contractor shall utilize a qualifying country photovoltaic device or a Canadian photovoltaic device as specified, or, at the Contractor’s option, a domestic photovoltaic device;
(3) $77,533 or more but less than $100,000, then the Contractor shall utilize under this contract only domestic photovoltaic devices or Free Trade Agreement country photovoltaic devices (other than Bahrainian, Korean, Moroccan, Panamanian, or Peruvian photovoltaic devices), unless, in its offer, it specified utilization of qualifying country or other foreign photovoltaic devices in paragraph (d)(4) of the Photovoltaic Devices—Certificate provision of the solicitation. If the Contractor certified in its offer that it will utilize a qualifying country photovoltaic device or a Free Trade Agreement country photovoltaic device (other than a Bahrainian, Korean, Moroccan, Panamanian, or Peruvian photovoltaic device), then the Contractor shall utilize a qualifying country photovoltaic device; a Free Trade Agreement country photovoltaic device (other than a Bahrainian, Korean, Moroccan, Panamanian, or Peruvian photovoltaic device) as specified; or, at the Contractor’s option, a domestic photovoltaic device;
(4) $100,000 or more but less than $191,000, then the Contractor shall utilize under this contract only domestic photovoltaic devices or Free Trade Agreement country photovoltaic devices (other than Bahrainian, Moroccan, Panamanian, or Peruvian photovoltaic devices), unless, in its offer, it specified utilization of qualifying country or other foreign photovoltaic devices in paragraph (d)(5) of the Photovoltaic Devices—Certificate provision of the solicitation. If the Contractor certified in its offer that it will utilize a qualifying country photovoltaic device or a Free Trade Agreement country photovoltaic device (other than a Bahrainian, Moroccan, Panamanian, or Peruvian photovoltaic device), then the Contractor shall utilize a qualifying country photovoltaic device; a Free Trade Agreement country photovoltaic device (other than a Bahrainian, Moroccan, Panamanian, or Peruvian photovoltaic device) as specified; or, at the Contractor’s option, a domestic photovoltaic device; or
(5) $191,000 or more, then the Contractor shall utilize under this contract only domestic or designated country photovoltaic devices unless, in its offer, it specified utilization of U.S.-made or qualifying country photovoltaic devices in paragraph (d)(6)(ii) or (iii) respectively of the Photovoltaic Devices—Certificate provision of the solicitation. If the Contractor certified in its offer that it will utilize a designated country, U.S.-made, or qualifying country photovoltaic device, then the Contractor shall utilize a designated country, U.S.-made, or qualifying country photovoltaic device as specified, or, at the Contractor’s option, a domestic photovoltaic device.
(End of clause)
252.225-7018 Photovoltaic Devices—Certificate.
As prescribed in 225.7017-5(b), use the following provision:
PHOTOVOLTAIC DEVICES—CERTIFICATE (JAN 2016)
(a) Definitions. “Bahrainian photovoltaic device,” “Canadian photovoltaic device,” “Caribbean Basin photovoltaic device,” “designated country,” “designated country photovoltaic device,” “domestic photovoltaic device,” “foreign photovoltaic device,” “Free Trade Agreement country,” “Free Trade Agreement photovoltaic device,” “Korean photovoltaic device,” “least developed country photovoltaic device,” “Moroccan photovoltaic device,” “Panamanian photovoltaic device,” “Peruvian photovoltaic device,” “photovoltaic device,” “qualifying country,” “qualifying country photovoltaic device,” “United States,” “U.S.-made photovoltaic device,” and “WTO GPA country photovoltaic device” have the meanings given in the Photovoltaic Devices clause of this solicitation.
(b) Restrictions. The following restrictions apply, depending on the estimated aggregate value of photovoltaic devices to be utilized under a resultant contract:
(1) If less than $204,000, then the Government will not accept an offer specifying the use of—
(i) Other foreign photovoltaic devices in paragraph (d)(2)(iii), (d)(3)(iii), (d)(4)(iii), or (d)(5)(iii) of this provision, unless the offeror documents to the satisfaction of the Contracting Officer that the price of the foreign photovoltaic device plus 50 percent is less than the price of a comparable domestic photovoltaic device and the Government determines in accordance with DFARS 225.7017-4(b) that the price of a comparable domestic photovoltaic device would be unreasonable; and
(ii) A qualifying country photovoltaic device unless the Government determines in accordance with DFARS 225.7017-4(a) that it is in the public interest to allow use of a qualifying country photovoltaic device.
(2) If $191,000 or more, then the Government will consider only offers that utilize photovoltaic devices that are domestic, qualifying country, or designated country photovoltaic devices, unless the Government determines in accordance with DFARS 225.7017-4(a) that it is in the public interest to allow use of a qualifying country photovoltaic device from Egypt or Turkey, or a U.S.-made photovoltaic device.
(c) Country in which a designated country photovoltaic device was wholly manufactured or was substantially transformed. If the estimated value of the photovoltaic devices to be utilized under a resultant contract exceeds $25,000, the Offeror’s certification that such photovoltaic device (e.g., solar panel) is a designated country photovoltaic device shall be consistent with country of origin determinations by the U.S. Customs and Border Protection with regard to importation of the same or similar photovoltaic devices into the United States. If the Offeror is uncertain as to what the country of origin would be determined to be by the U.S. Customs and Border Protection, the Offeror shall request a determination from U.S. Customs and Border Protection. (See http://www.cbp.gov/trade/rulings.)
(d) Certification and identification of country of origin.
[The offeror shall check the block and fill in the blank for one of the following paragraphs, based on the estimated value and the country of origin of photovoltaic devices to be utilized in performance of the contract:]
___ (1) No photovoltaic devices will be utilized in performance of the contract.
(2) If less than $25,000—
___ (i) The offeror certifies that each photovoltaic device to be utilized in performance of the contract is a domestic photovoltaic device;
___ (ii) The offeror certifies that each photovoltaic device to be utilized in performance of the contract is a qualifying country photovoltaic device [Offeror to specify country of origin____________]; or
___ (iii) The foreign (other than qualifying country) photovoltaic devices to be utilized in performance of the contract are the product of ___________________. [Offeror to specify country of origin, if known, and provide documentation that the cost of a domestic photovoltaic device would be unreasonable in comparison to the cost of the proposed foreign photovoltaic device, i.e. that the price of the foreign photovoltaic device plus 50 percent is less than the price of a comparable domestic photovoltaic device.]
(3) If $25,000 or more but less than $77,533—
___ (i) The offeror certifies that each photovoltaic device to be utilized in performance of the contract is a domestic photovoltaic device or a Canadian photovoltaic device [Offeror to specify country of origin____________________________];
___ (ii) The offeror certifies that each photovoltaic device to be utilized in performance of the contract is a qualifying country photovoltaic device [Offeror to specify country of origin___________________]; or
___ (iii) The foreign (other than qualifying country or Canadian) photovoltaic devices to be utilized in performance of the contract are the product of ___________________. [Offeror to specify country of origin, if known, and provide documentation that the cost of a domestic photovoltaic device would be unreasonable in comparison to the cost of the proposed foreign photovoltaic device, i.e. that the price of the foreign photovoltaic device plus 50 percent is less than the price of a comparable domestic photovoltaic device.]
(4) If $77,533 or more but less than $100,000—
___ (i) The offeror certifies that each photovoltaic device to be utilized in performance of the contract is a domestic photovoltaic device or a Free Trade Agreement country photovoltaic device (other than a Bahrainian, Korean, Moroccan, Panamanian, or Peruvian photovoltaic device) [Offeror to specify country of origin_________];
___ (ii) The offeror certifies that each photovoltaic device to be utilized in performance of the contract is a qualifying country photovoltaic device (except an Australian or Canadian photovoltaic device, to be listed in paragraph (d)(4)(i) of this provision as a Free Trade Agreement country photovoltaic device) [Offeror to specify country of origin____________]; or
___ (iii) The offered foreign photovoltaic devices (other than those from countries listed in paragraph (d)(4)(i) or (d)(4)(ii) of this provision) are the product of ___________________. [Offeror to specify country of origin, if known, and provide documentation that the cost of a domestic photovoltaic device would be unreasonable in comparison to the cost of the proposed foreign photovoltaic device, i.e. that the price of the foreign photovoltaic device plus 50 percent is less than the price of a comparable domestic photovoltaic device.]
(5) If $100,000 or more but less than $191,000—
___ (i) The offeror certifies that each photovoltaic device to be utilized in performance of the contract is a domestic photovoltaic device or a Free Trade Agreement country photovoltaic device (other than a Bahrainian, Moroccan, Panamanian, or Peruvian photovoltaic device) [Offeror to specify country of origin_________];
___ (ii) The offeror certifies that each photovoltaic device to be utilized in performance of the contract is a qualifying country photovoltaic device (except an Australian or Canadian photovoltaic device, to be listed in paragraph (d)(5)(i) of this provision as a Free Trade Agreement country photovoltaic device) [Offeror to specify country of origin____________]; or
___ (iii) The offered foreign photovoltaic devices (other than those from countries listed in paragraph (d)(5)(i) or (d)(5)(ii) of this provision) are the product of ___________________. [Offeror to specify country of origin, if known, and provide documentation that the cost of a domestic photovoltaic device would be unreasonable in comparison to the cost of the proposed foreign photovoltaic device, i.e. that the price of the foreign photovoltaic device plus 50 percent is less than the price of a comparable domestic photovoltaic device.]
(6) If $191,000 or more, the Offeror certifies that each photovoltaic device to be used in performance of the contract is—
___ (i) A domestic or designated country photovoltaic device [Offeror to specify country of origin_________________];
___ (ii) A U.S.-made photovoltaic device; or
___ (iii) A qualifying country photovoltaic device from Egypt of Turkey (photovoltaic devices from other qualifying countries to be listed in paragraph (d)(6)(i) of this provision as designated country photovoltaic devices). [Offeror to specify country of origin______________.]
(End of provision)
252.225-7019 Restriction on Acquisition of Anchor and Mooring Chain.
As prescribed in 225.7007-3, use the following clause:
RESTRICTION ON ACQUISITION OF ANCHOR AND MOORING CHAIN (DEC 2009)
(a) “Component,” as used in this clause, means an article, material, or supply incorporated directly into an end product.
(b) Welded shipboard anchor and mooring chain, four inches or less in diameter, delivered under this contract—
(1) Shall be manufactured in the United States or its outlying areas, including cutting, heat treating, quality control, testing, and welding (both forging and shot blasting process); and
(2) The cost of the components manufactured in the United States or its outlying areas shall exceed 50 percent of the total cost of components.
(c) The Contractor may request a waiver of this restriction if adequate domestic supplies meeting the requirements in paragraph (a) of this clause are not available to meet the contract delivery schedule.
(d) The Contractor shall insert the substance of this clause, including this paragraph (d), in all subcontracts for items containing welded shipboard anchor and mooring chain, four inches or less in diameter.
(End of clause)
252.225-7020 Trade Agreements Certificate.
Basic. As prescribed in 225.1101(5) and (5)(i), use the following provision:
TRADE AGREEMENTS CERTIFICATE—BASIC (NOV 2014)
(a) Definitions. “Designated country end product,” “nondesignated country end product,” “qualifying country end product,” and “U.S.-made end product” as used in this provision have the meanings given in the Trade Agreements—Basic clause of this solicitation.
(b) Evaluation. The Government—
(1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and
(2) Will consider only offers of end products that are U.S.-made, qualifying country, or designated country end products unless—
(i) There are no offers of such end products;
(ii) The offers of such end products are insufficient to fulfill the Government’s requirements; or
(iii) A national interest waiver has been granted.
(c) Certification and identification of country of origin.
(1) For all line items subject to the Trade Agreements—Basic clause of this solicitation, the offeror certifies that each end product to be delivered under this contract, except those listed in paragraph (c)(2) of this provision, is a U.S.-made, qualifying country, or designated country end product.
(2) The following supplies are other nondesignated country end products:
(Line Item Number) |
(Country of Origin) |
(End of provision)
Alternate I. As prescribed in 225.1101(5) and (5)(ii), use the following provision, which uses different paragraphs (a), (b)(2), and (c) than the basic provision:
TRADE AGREEMENTS CERTIFICATE—ALTERNATE I (NOV 2014)
(a) Definitions. “Designated country end product,” “nondesignated country end product,” “qualifying country end product,” “South Caucasus/Central and South Asian (SC/CASA) state,” “South Caucasus/Central and South Asian (SC/CASA) state end product,” and “U.S.-made end product,” as used in this provision, have the meanings given in the Trade Agreements—Alternate I clause of this solicitation.
(b) Evaluation. The Government—
(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and
(2) Will consider only offers of end products that are U.S.-made, qualifying country, SC/CASA state, or designated country end products unless—
(i) There are no offers of such end products;
(ii) The offers of such end products are insufficient to fulfill the Government’s requirements; or
(iii) A national interest waiver has been granted.
(c) Certification and identification of country of origin.
(1) For all line items subject to the Trade Agreement—Alternate I clause of this solicitation, the offeror certifies that each end product to be delivered under this contract, except those listed in paragraph (c)(2)(ii) of this provision, is a U.S.-made, qualifying country, SC/CASA state, or designated country end product.
(2)(i) The following supplies are SC/CASA state end products:
(Line Item Number) |
(Country of Origin) |
(ii) The following are other nondesignated country end products:
(Line Item Number) |
(Country of Origin) |
(End of provision)
252.225-7021 Trade Agreements.
Basic. As prescribed in 225.1101(6) and (6)(i), use the following clause:
TRADE AGREEMENTS—BASIC (SEP 2016)
(a) Definitions. As used in this clause
“Caribbean Basin country end product”
(i) Means an article that
(A) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or
(B) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself; and
(ii) Excludes products, other than petroleum and any product derived from petroleum, that are not granted duty-free treatment under the Caribbean Basin Economic Recovery Act (19 U.S.C. 2703(b)). These exclusions presently consist of
(A) Textiles, apparel articles, footwear, handbags, luggage, flat goods, work gloves, leather wearing apparel, and handloomed, handmade, or folklore articles that are not granted duty-free status in the Harmonized Tariff Schedule of the United States (HTSUS);
(B) Tuna, prepared or preserved in any manner in airtight containers; and
(C) Watches and watch parts (including cases, bracelets, and straps) of whatever type, including, but not limited to, mechanical, quartz digital, or quartz analog, if such watches or watch parts contain any material that is the product of any country to which the HTSUS column 2 rates of duty (HTSUS General Note 3(b)) apply.
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means an article, material, or supply incorporated directly into an end product.
“Designated country” means—
(i) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);
(ii) A Free Trade Agreement country (Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);
(iii) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or
(iv) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).
“Designated country end product” means a WTO GPA country end product, a Free Trade Agreement country end product, a least developed country end product, or a Caribbean Basin country end product.
“End product” means those articles, materials, and supplies to be acquired under this contract for public use.
“Free Trade Agreement country end product” means an article that
(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Least developed country end product” means an article that—
(i) Is wholly the growth, product, or manufacture of a least developed country; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Nondesignated country end product” means any end product that is not a U.S.-made end product or a designated country end product.
“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
“Qualifying country end product” means
(i) An unmanufactured end product mined or produced in a qualifying country; or
(ii) An end product manufactured in a qualifying country if—
(A) The cost of the following types of components exceeds 50 percent of the cost of all its components:
(1) Components mined, produced, or manufactured in a qualifying country.
(2) Components mined, produced, or manufactured in the United States.
(3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(B) The end product is a COTS item.
“United States” means the 50 States, the District of Columbia, and outlying areas.
“U.S.-made end product” means an article that
(i) Is mined, produced, or manufactured in the United States; or
(ii) Is substantially transformed in the United States into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed.
“WTO GPA country end product” means an article that
(i) Is wholly the growth, product, or manufacture of a WTO GPA country; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
(b) Unless otherwise specified, this clause applies to all items in the Schedule.
(c) The Contractor shall deliver under this contract only U.S.-made, qualifying country, or designated country end products unless—
(1) In its offer, the Contractor specified delivery of other nondesignated country end products in the Trade Agreements Certificate provision of the solicitation; and
(2)(i) Offers of U.S.-made, qualifying country, or designated country end products from responsive, responsible offerors are either not received or are insufficient to fill the Government’s requirements; or
(ii) A national interest waiver has been granted.
(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.
(e) The HTSUS is available on the Internet at http://www.usitc.gov/tata/hts/bychapter/index.htm. The following sections of the HTSUS provide information regarding duty-free status of articles specified in paragraph (a)(2)(ii)(A) of this clause:
(1) General Note 3(c), Products Eligible for Special Tariff Treatment.
(2) General Note 17, Products of Countries Designated as Beneficiary Countries Under the United States—Caribbean Basin Trade Partnership Act of 2000.
(3) Section XXII, Chapter 98, Subchapter II, Articles Exported and Returned, Advanced or Improved Abroad, U.S. Note 7(b).
(4) Section XXII, Chapter 98, Subchapter XX, Goods Eligible for Special Tariff Benefits Under the United States—Caribbean Basin Trade Partnership Act.
(End of clause)
Alternate I Reserved
Alternate II. As prescribed in 225.1101(6) and (6)(ii), use the following clause, which adds “South Caucasus/Central and South Asian (SC/CASA) state” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a); (ii) uses a different paragraph (c) than the basic clause; (iii) adds a new paragraph (d); and (iv) includes paragraphs (e) and (f) which are the same paragraphs (d) and (e) of the basic clause:
TRADE AGREEMENTSALTERNATE II (SEP 2016)
(a) Definitions. As used in this clause
“Caribbean Basin country end product”
(i) Means an article that
(A) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or
(B) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself; and
(ii) Excludes products, other than petroleum and any product derived from petroleum, that are not granted duty-free treatment under the Caribbean Basin Economic Recovery Act (19 U.S.C. 2703(b)). These exclusions presently consist of
(A) Textiles, apparel articles, footwear, handbags, luggage, flat goods, work gloves, leather wearing apparel, and handloomed, handmade, or folklore articles that are not granted duty-free status in the Harmonized Tariff Schedule of the United States (HTSUS);
(B) Tuna, prepared or preserved in any manner in airtight containers; and
(C) Watches and watch parts (including cases, bracelets, and straps) of whatever type, including, but not limited to, mechanical, quartz digital, or quartz analog, if such watches or watch parts contain any material that is the product of any country to which the HTSUS column 2 rates of duty (HTSUS General Note 3(b)) apply.
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means an article, material, or supply incorporated directly into an end product.
“Designated country” means—
(i) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia,
Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);
(ii) A Free Trade Agreement country (Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Peru, or Singapore);
(iii) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, East Timor, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Maldives, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, Tanzania, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or
(iv) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).
“Designated country end product” means a WTO GPA country end product, a Free Trade Agreement country end product, a least developed country end product, or a Caribbean Basin country end product.
“End product” means those articles, materials, and supplies to be acquired under this contract for public use.
“Free Trade Agreement country end product” means an article that
(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Least developed country end product” means an article that—
(i) Is wholly the growth, product, or manufacture of a least developed country; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Nondesignated country end product” means any end product that is not a U.S.-made end product or a designated country end product.
“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
“Qualifying country end product” means
(i) An unmanufactured end product mined or produced in a qualifying country; or
(ii) An end product manufactured in a qualifying country if—
(A) The cost of the following types of components exceeds 50 percent of the cost of all its components:
(1) Components mined, produced, or manufactured in a qualifying country.
(2) Components mined, produced, or manufactured in the United States.
(3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(B) The end product is a COTS item.
“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.
“South Caucasus/Central and South Asian (SC/CASA) state end product” means an article that
(i) Is wholly the growth, product, or manufacture of an SC/CASA state; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“United States” means the 50 States, the District of Columbia, and outlying areas.
“U.S.-made end product” means an article that
(i) Is mined, produced, or manufactured in the United States; or
(ii) Is substantially transformed in the United States into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed.
“WTO GPA country end product” means an article that
(i) Is wholly the growth, product, or manufacture of a WTO GPA country; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
(b) Unless otherwise specified, this clause applies to all items in the Schedule.
(c) The Contractor shall deliver under this contract only U.S.-made, qualifying country, SC/CASA state, or designated country end products unless—
(1) In its offer, the Contractor specified delivery of other nondesignated country end products in the Trade Agreements Certificate provision of the solicitation; and
(2)(i) Offers of U.S.-made, qualifying country, SC/CASA state, or designated country end products from responsive, responsible offerors are either not received or are insufficient to fill the Government’s requirements; or
(ii) A national interest waiver has been granted.
(d) If the Contractor is from an SC/CASA state, the Contractor shall inform its government of its participation in this acquisition and that it generally will not have such opportunity in the future unless its government provides reciprocal procurement opportunities to U.S. products and services and suppliers of such products and services.
(e) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.
(f) The HTSUS is available on the Internet at http://www.usitc.gov/tata/hts/bychapter/index.htm. The following sections of the HTSUS provide information regarding duty-free status of articles specified in paragraph (a)(2)(ii)(A) of this clause:
(1) General Note 3(c), Products Eligible for Special Tariff Treatment.
(2) General Note 17, Products of Countries Designated as Beneficiary Countries Under the United States—Caribbean Basin Trade Partnership Act of 2000.
(3) Section XXII, Chapter 98, Subchapter II, Articles Exported and Returned, Advanced or Improved Abroad, U.S. Note 7(b).
(4) Section XXII, Chapter 98, Subchapter XX, Goods Eligible for Special Tariff Benefits Under the United States—Caribbean Basin Trade Partnership Act.
(End of clause)
252.225-7023 Preference for Products or Services from Afghanistan.
As prescribed in 225.7703-4(a), use the following provision:
PREFERENCE FOR PRODUCTS OR SERVICES FROM AFGHANISTAN (SEP 2013)
(a) Definitions. “Product from Afghanistan” and “service from Afghanistan,” as used in this provision, are defined in the clause of this solicitation entitled “Requirement for Products or Services from Afghanistan” (DFARS 252.225-7024).
(b) Representation. The offeror represents that all products or services to be delivered under a contract resulting from this solicitation are products from Afghanistan or services from Afghanistan, except those listed in—
(1) Paragraph (c) of this provision; or
(2) Paragraph (c)(2) of the provision entitled “Trade Agreements Certificate,” if included in this solicitation.
(c) Other products or services. The following offered products or services are not products from Afghanistan or services from Afghanistan:
(Line Item Number) (Country of Origin)
(d) Evaluation. For the purpose of evaluating competitive offers, the Contracting Officer will increase by 50 percent the prices of offers of products or services that are not products or services from Afghanistan.
(End of provision)
252.225-7024 Requirement for Products or Services from Afghanistan.
As prescribed in 225.7703-4(b), use the following clause:
REQUIREMENT FOR PRODUCTS OR SERVICES FROM AFGHANISTAN (SEP 2013)
(a) Definitions. As used in this clause—
(1) “Product from Afghanistan” means a product that is mined, produced, or manufactured in Afghanistan.
(2) “Service from Afghanistan” means a service including construction that is performed in Afghanistan predominantly by citizens or permanent resident aliens of Afghanistan.
(b) The Contractor shall provide only products from Afghanistan or services from Afghanistan under this contract, unless, in its offer, it specified that it would provide products or services other than products from Afghanistan or services from Afghanistan.
(End of clause)
252.225-7025 Restriction on Acquisition of Forgings.
As prescribed in 225.7102-4, use the following clause:
RESTRICTION ON ACQUISITION OF FORGINGS (DEC 2009)
(a) Definitions. As used in this clause
(1)“Component” means any item supplied to the Government as part of an end product or of another component.
(2) “Domestic manufacture” means manufactured in the United States, its outlying areas; or Canada.
(3) “Forging items” means—
ITEMS Ship propulsion shafts Periscope tubes Ring forgings for bull gears |
CATEGORIES Excludes service and landing craft shafts All All greater than 120 inches in diameter |
(b) End products and their components delivered under this contract shall contain forging items that are of domestic manufacture only.
(c) The restriction in paragraph (b) of this clause may be waived upon request from the Contractor in accordance with subsection 225.7102-3 of the Defense Federal Acquisition Regulation Supplement.
(d) The Contractor shall retain records showing compliance with the restriction in paragraph (b) of this clause until 3 years after final payment and shall make the records available upon request of the Contracting Officer.
(e) The Contractor shall insert the substance of this clause, including this paragraph (e), in subcontracts for forging items or for other items that contain forging items.
(End of clause)
252.225-7026 Acquisition Restricted to Products or Services from Afghanistan.
As prescribed in 225.7703-4(c), use the following clause:
ACQUISITION RESTRICTED TO PRODUCTS OR SERVICES FROM AFGHANISTAN (SEP 2013)
(a) Definitions. As used in this clause—
(1) “Product from Afghanistan” means a product that is mined, produced, or manufactured in Afghanistan.
(2) “Service from Afghanistan” means a service including construction that is performed in Afghanistan predominantly by citizens or permanent resident aliens of Afghanistan.
(b) The Contractor shall provide only products from Afghanistan or services from Afghanistan under this contract.
(End of clause)
252.225-7027 Restriction on Contingent Fees for Foreign Military Sales.
As prescribed in 225.7307(a), use the following clause.
RESTRICTION ON CONTINGENT FEES FOR FOREIGN MILITARY SALES (APR 2003)
(a) Except as provided in paragraph (b) of this clause, contingent fees, as defined in the Covenant Against Contingent Fees clause of this contract, are generally an allowable cost, provided the fees are paid to—
(1) A bona fide employee of the Contractor; or
(2) A bona fide established commercial or selling agency maintained by the Contractor for the purpose of securing business.
(b) For foreign military sales, unless the contingent fees have been identified and payment approved in writing by the foreign customer before contract award, the following contingent fees are unallowable under this contract:
(1) For sales to the Government(s) of __________, contingent fees in any amount.
(2) For sales to Governments not listed in paragraph (b)(1) of this clause, contingent fees exceeding $50,000 per foreign military sale case.
(End of clause)
252.225-7028 Exclusionary Policies and Practices of Foreign Governments.
As prescribed in 225.7307(b), use the following clause:
EXCLUSIONARY POLICIES AND PRACTICES OF FOREIGN GOVERNMENTS (APR 2003)
The Contractor and its subcontractors shall not take into account the exclusionary policies or practices of any foreign government in employing or assigning personnel, if—
(a) The personnel will perform functions required by this contract, either in the United States or abroad; and
(b) The exclusionary policies or practices of the foreign government are based on race, religion, national origin, or sex.
(End of clause)
252.225-7029 Acquisition of Uniform Components for Afghan Military or Afghan National Police.
As prescribed in 225.7703-4(d), use the following clause:
ACQUISITION OF UNIFORM COMPONENTS FOR AFGHAN MILITARY OR AFGHAN NATIONAL POLICE (SEP 2013)
(a) Definitions. As used in this clause—
“Textile component” means any item consisting of fibers, yarns, or fabric, supplied for incorporation into a uniform or a component of a uniform. It does not include items that do not contain fibers, yarns, or fabric, such as the metallic or plastic elements of buttons, zippers, or other clothing fasteners.
“United States” means the 50 States, the District of Columbia, and outlying areas.
(b) As required by section 826 of the National Defense Authorization Act for Fiscal Year 2013 (Pub. L. 112-239), the Contractor shall deliver under this contract only textile components that have been produced in the United States.
(c) There are no exceptions or waivers to this requirement.
(End of clause)
252.225-7030 Restriction on Acquisition of Carbon, Alloy, and Armor Steel Plate.
As prescribed in 225.7011-3, use the following clause:
RESTRICTION ON ACQUISITION OF CARBON, ALLOY, AND ARMOR STEEL PLATE (DEC 2006)
(a) Carbon, alloy, and armor steel plate shall be melted and rolled in the United States or Canada if the carbon, alloy, or armor steel plate—
(1) Is in Federal Supply Class 9515 or is described by specifications of the American Society for Testing Materials or the American Iron and Steel Institute; and
(2)(i) Will be delivered to the Government for use in a Government-owned facility or a facility under the control of the Department of Defense; or
(ii) Will be purchased by the Contractor for use in a Government-owned facility or a facility under the control of the Department of Defense.
(b) This restriction—
(1) Applies to the acquisition of carbon, alloy, or armor steel plate as a finished steel mill product that may be used “as is” or may be used as an intermediate material for the fabrication of an end product; and
(2) Does not apply to the acquisition of an end product (e.g., a machine tool), to be used in the facility, that contains carbon, alloy, or armor steel plate as a component.
(End of clause)
252.225-7031 Secondary Arab Boycott of Israel.
As prescribed in 225.7605, use the following provision:
SECONDARY ARAB BOYCOTT OF ISRAEL (JUN 2005)
(a) Definitions. As used in this provision—
(1) “Foreign person” means any person (including any individual, partnership, corporation, or other form of association) other than a United States person.
(2) “United States” means the 50 States, the District of Columbia, outlying areas, and the outer Continental Shelf as defined in 43 U.S.C. 1331.
(3) “United States person” is defined in 50 U.S.C. App. 2415(2) and means—
(i) Any United States resident or national (other than an individual resident outside the United States who is employed by other than a United States person);
(ii) Any domestic concern (including any permanent domestic establishment of any foreign concern); and
(iii) Any foreign subsidiary or affiliate (including any permanent foreign establishment) of any domestic concern that is controlled in fact by such domestic concern.
(b) Certification. If the offeror is a foreign person, the offeror certifies, by submission of an offer, that it—
(1) Does not comply with the Secondary Arab Boycott of Israel; and
(2) Is not taking or knowingly agreeing to take any action, with respect to the Secondary Boycott of Israel by Arab countries, which 50 U.S.C. App. 2407(a) prohibits a United States person from taking.
(End of provision)
252.225-7032 Waiver of United Kingdom Levies—Evaluation of Offers.
As prescribed in 225.1101(7), use the following provision:
WAIVER OF UNITED KINGDOM LEVIES – EVALUATION OF OFFERS (APR 2003)
(a) Offered prices for contracts or subcontracts with United Kingdom (U.K.) firms may contain commercial exploitation levies assessed by the Government of the U.K. The offeror shall identify to the Contracting Officer all levies included in the offered price by describing—
(1) The name of the U.K. firm;
(2) The item to which the levy applies and the item quantity; and
(3) The amount of levy plus any associated indirect costs and profit or fee.
(b) In the event of difficulty in identifying levies included in a price from a prospective subcontractor, the offeror may seek advice through the Director of Procurement, United Kingdom Defence Procurement Office, British Embassy, 3100 Massachusetts Avenue NW, Washington, DC 20006.
(c) The U.S. Government may attempt to obtain a waiver of levies pursuant to the U.S./U.K. reciprocal waiver agreement of July 1987.
(1) If the U.K. waives levies before award of a contract, the Contracting Officer will evaluate the offer without the levy.
(2) If levies are identified but not waived before award of a contract, the Contracting Officer will evaluate the offer inclusive of the levies.
(3) If the U.K. grants a waiver of levies after award of a contract, the U.S. Government reserves the right to reduce the contract price by the amount of the levy waived plus associated indirect costs and profit or fee.
(End of provision)
252.225-7033 Waiver of United Kingdom Levies.
As prescribed in 225.1101(8), use the following clause:
WAIVER OF UNITED KINGDOM LEVIES (APR 2003)
(a) The U.S. Government may attempt to obtain a waiver of any commercial exploitation levies included in the price of this contract, pursuant to the U.S./United Kingdom (U.K.) reciprocal waiver agreement of July 1987. If the U.K. grants a waiver of levies included in the price of this contract, the U.S. Government reserves the right to reduce the contract price by the amount of the levy waived plus associated indirect costs and profit or fee.
(b) If the Contractor contemplates award of a subcontract exceeding $1 million to a U.K. firm, the Contractor shall provide the following information to the Contracting Officer before award of the subcontract:
(1) Name of the U.K. firm.
(2) Prime contract number.
(3) Description of item to which the levy applies.
(4) Quantity being acquired.
(5) Amount of levy plus any associated indirect costs and profit or fee.
(c) In the event of difficulty in identifying levies included in a price from a prospective subcontractor, the Contractor may seek advice through the Director of Procurement, United Kingdom Defence Procurement Office, British Embassy, 3100 Massachusetts Avenue NW, Washington, DC 20006.
(d) The Contractor shall insert the substance of this clause, including this paragraph (d), in any subcontract for supplies where a lower-tier subcontract exceeding $1 million with a U.K. firm is anticipated.
(End of clause)
252.225-7035 Buy American--Free Trade Agreements--Balance of Payments
Program Certificate.
Basic. As prescribed in 225.1101(9) and (9)(i), use the following provision:
BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—BASIC (NOV 2014)
(a) Definitions. “Bahrainian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “foreign end product,” “Moroccan end product,” “Panamanian end product,” “Peruvian end product,” “qualifying country end product,” and “United States,” as used in this provision, have the meanings given in the Buy American—Free Trade Agreements—Balance of Payments Program—Basic clause of this solicitation.
(b) Evaluation. The Government—
(1) Will evaluate offers in accordance with the policies and procedures of Part 225 of the Defense Federal Acquisition Regulation Supplement; and
(2) For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Basic clause of this solicitation, will evaluate offers of qualifying country end products or Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program.
(c) Certifications and identification of country of origin.
(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Basic clause of this solicitation, the offeror certifies that—
(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and
(ii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.
(2) The offeror shall identify all end products that are not domestic end products.
(i) The offeror certifies that the following supplies are qualifying country (except Australian or Canadian) end products:
(Line Item Number) (Country of Origin)
(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products:
(Line Item Number) (Country of Origin)
(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:
(Line Item Number) (Country of Origin (If known))
(End of provision)
Alternate I. As prescribed in 225.1101(9) and (9)(ii), use the following provision, which uses “Canadian end product” in paragraph (a), rather than the phrases “Bahrainian end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “Moroccan end product,” “Panamanian end product,” and “Peruvian end products” in paragraph (a) of the basic provision; uses “Canadian end products” in paragraphs (b)(2) and (c)(2)(i), rather than “Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products” in paragraphs (b)(2) and (c)(2)(ii) of the basic provision; and does not use “Australian or” in paragraph (c)(2)(i):
BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—ALTERNATE I (NOV 2014)
(a) Definitions. “Canadian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “foreign end product,” “qualifying country end product,” and “United States,” as used in this provision, have the meanings given in the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate I clause of this solicitation.
(b) Evaluation. The Government—
(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and
(2) For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate I clause of this solicitation, will evaluate offers of qualifying country end products or Canadian end products without regard to the restrictions of the Buy American or the Balance of Payments Program.
(c) Certifications and identification of country of origin.
(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate I clause of this solicitation, the offeror certifies that—
(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and
(ii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.
(2) The offeror shall identify all end products that are not domestic end products.
(i) The offeror certifies that the following supplies are qualifying country (except Canadian) end products:
(Line Item Number) (Country of Origin)
(ii) The offeror certifies that the following supplies are Canadian end products:
(Line Item Number) (Country of Origin)
(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:
(Line Item Number) (Country of Origin (If known))
(End of provision)
Alternate II. As prescribed in 225.1101(9) and (9)(iii), use the following provision, which adds “South Caucasus/Central and South Asian (SC/CASA) state” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a), and uses different paragraphs (b)(2) and (c)(2)(i) than the basic provision:
BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—ALTERNATE II (NOV 2014)
(a) Definitions. “Bahrainian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “foreign end product,” “Moroccan end product,” “Panamanian end product,” “Peruvian end product,” “qualifying country end product,” “South Caucasus/Central and South Asian (SC/CASA) state,” “South Caucasus/Central and South Asian (SC/CASA) state end product,” and “United States,” as used in this provision, have the meanings given in the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate II clause of this solicitation.
(b) Evaluation. The Government—
(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and
(2) For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate II clause of this solicitation, will evaluate offers of qualifying country end products, SC/CASA state end products, or Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program.
(c) Certifications and identification of country of origin.
(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate II clause of this solicitation, the offeror certifies that—
(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and
(ii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.
(2) The offeror shall identify all end products that are not domestic end products.
(i) The offeror certifies that the following supplies are qualifying country (except Australian or Canadian) or SC/CASA state end products:
(Line Item Number) (Country of Origin)
(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products:
(Line Item Number) (Country of Origin)
(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:
(Line Item Number) (Country of Origin (If known))
(End of provision)
Alternate III. As prescribed in 225.1101(9) and (9)(iv), use the following provision, which uses different paragraphs (a), (b)(2), (c)(2)(i), and (c)(2)(ii) than the basic provision:
BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—ALTERNATE III (NOV 2014)
(a) Definitions. “Canadian end product,” “commercially available off-the-shelf (COTS) item,” “domestic end product,” “foreign end product,” “qualifying country end product,” “South Caucasus/Central and South Asian (SC/CASA) state end product,” and “United States,” as used in this provision have the meanings given in the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate III clause of this solicitation.
(b) Evaluation. The Government—
(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and
(2) For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate III clause of this solicitation, will evaluate offers of qualifying country end products, SC/CASA state end products, or Canadian end products without regard to the restrictions of the Buy American or the Balance of Payments Program.
(c) Certifications and identification of country of origin.
(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate III clause of this solicitation, the offeror certifies that—
(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and
(ii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.
(2) The offeror shall identify all end products that are not domestic end products.
(i) The offeror certifies that the following supplies are qualifying country (except Canadian) or SC/CASA state end products:
(Line Item Number) (Country of Origin)
(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products:
(Line Item Number) (Country of Origin)
(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:
(Line Item Number) (Country of Origin (If known))
(End of provision)
Alternate IV. As prescribed in 225.1101(9) and (9)(v), use the following provision, which adds “Korean end product” to paragraph (a) and uses “Free Trade Agreement country end products other than Bahrainian end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products” in paragraphs (b)(2) and (c)(2)(ii), rather than “Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products” in paragraphs (b)(2) and (c)(2)(ii) of the basic provision:
BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—ALTERNATE IV (NOV 2014)
(a) Definitions. “Bahrainian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “foreign end product,” “Korean end product,” “Moroccan end product,” “Panamanian end product,” “Peruvian end product,” “qualifying country end product,” and “United States,” as used in this provision, have the meanings given in the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate IV clause of this solicitation.
(b) Evaluation. The Government—
(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and
(2) For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate IV clause of this solicitation, will evaluate offers of qualifying country end products or Free Trade Agreement country end products other than Bahrainian end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American or the Balance of Payments Program.
(c) Certifications and identification of country of origin.
(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate IV clause of this solicitation, the offeror certifies that—
(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and
(ii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.
(2) The offeror shall identify all end products that are not domestic end products.
(i) The offeror certifies that the following supplies are qualifying country (except Australian or Canadian) end products:
(Line Item Number) (Country of Origin)
(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products:
(Line Item Number) (Country of Origin)
(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:
(Line Item Number) (Country of Origin (If known))
(End of provision)
Alternate V. As prescribed in 225.1101(9) and (9)(vi), use the following provision, which uses different paragraphs (a), (b)(2), (c)(2)(i), and (c)(2)(ii) than the basic provision:
BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM CERTIFICATE—ALTERNATE V (NOV 2014)
(a) Definitions. “Bahrainian end product,” “commercially available off-the-shelf (COTS) item,” “component,” “domestic end product,” “Free Trade Agreement country,” “Free Trade Agreement country end product,” “foreign end product,” “Korean end product,” “Moroccan end product,” “Panamanian end product,” “Peruvian end product,” “qualifying country end product,” “South Caucasus/Central and South Asian (SC/CASA) state end product,” and “United States,” as used in this provision, have the meanings given in the Buy American Act—Free Trade Agreements—Balance of Payments Program—Alternate V clause of this solicitation.
(b) Evaluation. The Government—
(1) Will evaluate offers in accordance with the policies and procedures of part 225 of the Defense Federal Acquisition Regulation Supplement; and
(2) For line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate V clause of this solicitation, will evaluate offers of qualifying country end products, SC/CASA state end products, or Free Trade Agreement end products other than Bahrainian end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products without regard to the restrictions of the Buy American statute or the Balance of Payments Program.
(c) Certifications and identification of country of origin.
(1) For all line items subject to the Buy American—Free Trade Agreements—Balance of Payments Program—Alternate V clause of this solicitation, the offeror certifies that—
(i) Each end product, except the end products listed in paragraph (c)(2) of this provision, is a domestic end product; and
(ii) Components of unknown origin are considered to have been mined, produced, or manufactured outside the United States or a qualifying country.
(2) The offeror shall identify all end products that are not domestic end products.
(i) The offeror certifies that the following supplies are qualifying country (except Australian or Canadian) or SC/CASA state end products:
(Line Item Number) (Country of Origin)
(ii) The offeror certifies that the following supplies are Free Trade Agreement country end products other than Bahrainian end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products:
(Line Item Number) (Country of Origin)
(iii) The following supplies are other foreign end products, including end products manufactured in the United States that do not qualify as domestic end products, i.e., an end product that is not a COTS item and does not meet the component test in paragraph (ii) of the definition of “domestic end product”:
(Line Item Number) (Country of Origin (If known))
(End of provision)
252.225-7036 Buy American—Free Trade Agreements--Balance of Payments
Program.
Basic. As prescribed in 225.1101(10)(i) and (10)(i)(A), use the following clause:
BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—BASIC (AUG 2016)
(a) Definitions. As used in this clause—
“Bahrainian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Bahrain; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means an article, material, or supply incorporated directly into an end product.
“Domestic end product” means—
(i) An unmanufactured end product that has been mined or produced in the United States; or
(ii) An end product manufactured in the United States if—
(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that
(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or
(B) The end product is a COTS item.
“End product” means those articles, materials, and supplies to be acquired under this contract for public use.
“Foreign end product” means an end product other than a domestic end product.
“Free Trade Agreement country” means Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore;
“Free Trade Agreement country end product” means an article that—
(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Moroccan end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Morocco; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Panamanian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Panama; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Peruvian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Peru; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.
“Qualifying country end product” means
(i) An unmanufactured end product mined or produced in a qualifying country; or
(ii) An end product manufactured in a qualifying country if—
(A) The cost of the following types of components exceeds 50 percent of the cost of all its components:
(1) Components mined, produced, or manufactured in a qualifying country.
(2) Components mined, produced, or manufactured in the United States.
(3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(B) The end product is a COTS item.
“United States” means the 50 States, the District of Columbia, and outlying areas.
(b) Unless otherwise specified, this clause applies to all items in the Schedule.
(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Basic provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or a Free Trade Agreement country end product other than a Bahrainian end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, a Free Trade Agreement country end product other than a Bahrainian end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, or, at the Contractor’s option, a domestic end product.
(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.
(End of clause)
Alternate I. As prescribed in 225.1101(10)(i) and (10)(i)(B), use the following clause, which adds “Canadian end product” to paragraph (a), and uses a different paragraph (c) than the basic clause:
BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE I (AUG 2016)
(a) Definitions. As used in this clause—
“Bahrainian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Bahrain; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Canadian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Canada; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Canada into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means an article, material, or supply incorporated directly into an end product.
“Domestic end product” means—
(i) An unmanufactured end product that has been mined or produced in the United States; or
(ii) An end product manufactured in the United States if—
(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that
(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or
(B) The end product is a COTS item.
“End product” means those articles, materials, and supplies to be acquired under this contract for public use.
“Foreign end product” means an end product other than a domestic end product.
“Free Trade Agreement country” means Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore;
“Free Trade Agreement country end product” means an article that—
(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Moroccan end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Morocco; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Panamanian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Panama; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Peruvian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Peru; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.
“Qualifying country end product” means
(i) An unmanufactured end product mined or produced in a qualifying country; or
(ii) An end product manufactured in a qualifying country if—
(A) The cost of the following types of components exceeds 50 percent of the cost of all its components:
(1) Components mined, produced, or manufactured in a qualifying country.
(2) Components mined, produced, or manufactured in the United States.
(3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(B) The end product is a COTS item.
“United States” means the 50 States, the District of Columbia, and outlying areas.
(b) Unless otherwise specified, this clause applies to all items in the Schedule.
(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country, Canadian, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate I provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or a Canadian end product, the Contractor shall deliver a qualifying country end product, a Canadian end product, or, at the Contractor’s option, a domestic end product.
(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.
(End of clause)
Alternate II. As prescribed in 225.1101(10)(i) and (10)(i)(C), use the following clause, which adds “South Caucasus/Central and South Asian (SC/CASA) state” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a), and uses a different paragraph (c) than the basic clause:
BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE II (AUG 2016)
(a) Definitions. As used in this clause—
“Bahrainian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Bahrain; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means an article, material, or supply incorporated directly into an end product.
“Domestic end product” means—
(i) An unmanufactured end product that has been mined or produced in the United States; or
(ii) An end product manufactured in the United States if—
(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that
(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or
(B) The end product is a COTS item.
“End product” means those articles, materials, and supplies to be acquired under this contract for public use.
“Foreign end product” means an end product other than a domestic end product.
“Free Trade Agreement country” means Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore;
“Free Trade Agreement country end product” means an article that—
(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Moroccan end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Morocco; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Panamanian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Panama; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Peruvian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Peru; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.
“Qualifying country end product” means
(i) An unmanufactured end product mined or produced in a qualifying country; or
(ii) An end product manufactured in a qualifying country if—
(A) The cost of the following types of components exceeds 50 percent of the cost of all its components:
(1) Components mined, produced, or manufactured in a qualifying country.
(2) Components mined, produced, or manufactured in the United States.
(3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(B) The end product is a COTS item.
“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.
“South Caucasus/Central and South Asian (SC/CASA) state end product” means an article that
(i) Is wholly the growth, product, or manufacture of an SC/CASA state; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“United States” means the 50 States, the District of Columbia, and outlying areas.
(b) Unless otherwise specified, this clause applies to all items in the Schedule.
(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, Free Trade Agreement country end products other than Bahrainian end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate II provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, SC/CASA state end products, or a Free Trade Agreement country end product other than a Bahrainian end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, a Free Trade Agreement country end product other than a Bahrainian end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product or, at the Contractor’s option, a domestic end product.
(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.
(End of clause)
Alternate III. As prescribed in 225.1101(10)(i) and (10)(i)(D), use the following clause, which adds “Canadian end product,” “South Caucasus/Central and South Asian (SC/CASA) state,” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a) and uses a different paragraph (c) than the basic clause:
BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE III (AUG 2016)
(a) Definitions. As used in this clause—
“Bahrainian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Bahrain; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Canadian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Canada; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Canada into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means an article, material, or supply incorporated directly into an end product.
“Domestic end product” means—
(i) An unmanufactured end product that has been mined or produced in the United States; or
(ii) An end product manufactured in the United States if—
(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that
(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or
(B) The end product is a COTS item.
“End product” means those articles, materials, and supplies to be acquired under this contract for public use.
“Foreign end product” means an end product other than a domestic end product.
“Free Trade Agreement country” means Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore;
“Free Trade Agreement country end product” means an article that—
(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Moroccan end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Morocco; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Panamanian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Panama; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Peruvian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Peru; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.
“Qualifying country end product” means
(i) An unmanufactured end product mined or produced in a qualifying country; or
(ii) An end product manufactured in a qualifying country if—
(A) The cost of the following types of components exceeds 50 percent of the cost of all its components:
(1) Components mined, produced, or manufactured in a qualifying country.
(2) Components mined, produced, or manufactured in the United States.
(3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(B) The end product is a COTS item.
“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.
“South Caucasus/Central and South Asian (SC/CASA) state end product”
means an article that
(i) Is wholly the growth, product, or manufacture of an SC/CASA state; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“United States” means the 50 States, the District of Columbia, and outlying areas.
(b) Unless otherwise specified, this clause applies to all items in the Schedule.
(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, Canadian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate III provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, SC/CASA state end products, or a Canadian end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, a Canadian end product or, at the Contractor’s option, a domestic end product.
(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.
(End of clause)
Alternate IV. As prescribed in 225.1101(10)(i) and (10)(i)(E), use the following clause, which adds “Korean end product” to paragraph (a), and uses a different paragraph (c) than the basic clause:
BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE IV (AUG 2016)
(a) Definitions. As used in this clause—
“Bahrainian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Bahrain; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means an article, material, or supply incorporated directly into an end product.
“Domestic end product” means—
(i) An unmanufactured end product that has been mined or produced in the United States; or
(ii) An end product manufactured in the United States if—
(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that
(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or
(B) The end product is a COTS item.
“End product” means those articles, materials, and supplies to be acquired under this contract for public use.
“Foreign end product” means an end product other than a domestic end product.
“Free Trade Agreement country” means Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore;
“Free Trade Agreement country end product” means an article that—
(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Korean end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Korea; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Korea (Republic of) into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Moroccan end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Morocco; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Panamanian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Panama; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Peruvian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Peru; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.
“Qualifying country end product” means
(i) An unmanufactured end product mined or produced in a qualifying country; or
(ii) An end product manufactured in a qualifying country if—
(A) The cost of the following types of components exceeds 50 percent of the cost of all its components:
(1) Components mined, produced, or manufactured in a qualifying country.
(2) Components mined, produced, or manufactured in the United States.
(3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(B) The end product is a COTS item.
“United States” means the 50 States, the District of Columbia, and outlying areas.
(b) Unless otherwise specified, this clause applies to all items in the Schedule.
(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, Free Trade Agreement country end products other than Bahrainian end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate IV provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product or a Free Trade Agreement country end product other than a Bahrainian end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, a Free Trade Agreement country end product other than a Bahrainian end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, or, at the Contractor’s option, a domestic end product.
(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.
(End of clause)
Alternate V. As prescribed in 225.1101(10)(i) and (10)(i)(F), use the following clause, which adds “Korean end product,” “South Caucasus/Central and South Asian (SC/CASA) state,” and “South Caucasus/Central and South Asian (SC/CASA) state end product” to paragraph (a), and uses a different paragraph (c) than the basic clause:
BUY AMERICAN—FREE TRADE AGREEMENTS—BALANCE OF PAYMENTS PROGRAM—ALTERNATE V (AUG 2016)
(a) Definitions. As used in this clause—
“Bahrainian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Bahrain; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means an article, material, or supply incorporated directly into an end product.
“Domestic end product” means—
(i) An unmanufactured end product that has been mined or produced in the United States; or
(ii) An end product manufactured in the United States if—
(A) The cost of its qualifying country components and its components that are mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. The cost of components includes transportation costs to the place of incorporation into the end product and U.S. duty (whether or not a duty-free entry certificate is issued). Scrap generated, collected, and prepared for processing in the United States is considered domestic. A component is considered to have been mined, produced, or manufactured in the United States (regardless of its source in fact) if the end product in which it is incorporated is manufactured in the United States and the component is of a class or kind for which the Government has determined that
(1) Sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(2) It is inconsistent with the public interest to apply the restrictions of the Buy American statute; or
(B) The end product is a COTS item.
“End product” means those articles, materials, and supplies to be acquired under this contract for public use.
“Foreign end product” means an end product other than a domestic end product.
“Free Trade Agreement country” means Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore;
“Free Trade Agreement country end product” means an article that—
(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Korean end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Korea; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Korea (Republic of) into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Moroccan end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Morocco; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Morocco into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Panamanian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Panama; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Panama into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Peruvian end product” means an article that—
(i) Is wholly the growth, product, or manufacture of Peru; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in Peru into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“Qualifying country” means a country with a reciprocal defense procurement memorandum of understanding or international agreement with the United States in which both countries agree to remove barriers to purchases of supplies produced in the other country or services performed by sources of the other country, and the memorandum or agreement complies, where applicable, with the requirements of section 36 of the Arms Export Control Act (22 U.S.C. 2776) and with 10 U.S.C. 2457. Accordingly, the following are qualifying countries:
Australia
Austria
Belgium
Canada
Czech Republic
Denmark
Egypt
Finland
France
Germany
Greece
Israel
Italy
Japan
Luxembourg
Netherlands
Norway
Poland
Portugal
Slovenia
Spain
Sweden
Switzerland
Turkey
United Kingdom of Great Britain and Northern Ireland.
“Qualifying country component” means a component mined, produced, or manufactured in a qualifying country.
“Qualifying country end product” means
(i) An unmanufactured end product mined or produced in a qualifying country; or
(ii) An end product manufactured in a qualifying country if—
(A) The cost of the following types of components exceeds 50 percent of the cost of all its components:
(1) Components mined, produced, or manufactured in a qualifying country.
(2) Components mined, produced, or manufactured in the United States.
(3) Components of foreign origin of a class or kind for which the Government has determined that sufficient and reasonably available commercial quantities of a satisfactory quality are not mined, produced, or manufactured in the United States; or
(B) The end product is a COTS item.
“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.
“South Caucasus/Central and South Asian (SC/CASA) state end product” means an article that—
(i) Is wholly the growth, product, or manufacture of an SC/CASA state; or
(ii) In the case of an article that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different article of commerce with a name, character, or use distinct from that of the article or articles from which it was transformed. The term refers to a product offered for purchase under a supply contract, but for purposes of calculating the value of the end product, includes services (except transportation services) incidental to its supply, provided that the value of those incidental services does not exceed the value of the product itself.
“United States” means the 50 States, the District of Columbia, and outlying areas.
(b) Unless otherwise specified, this clause applies to all items in the Schedule.
(c) The Contractor shall deliver under this contract only domestic end products unless, in its offer, it specified delivery of qualifying country end products, SC/CASA state end products, Free Trade Agreement country end products other than Bahrainian end products, Korean end products, Moroccan end products, Panamanian end products, or Peruvian end products, or other foreign end products in the Buy American—Free Trade Agreements—Balance of Payments Program Certificate—Alternate V provision of the solicitation. If the Contractor certified in its offer that it will deliver a qualifying country end product, SC/CASA state end products, or a Free Trade Agreement country end product other than a Bahrainian end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product, the Contractor shall deliver a qualifying country end product, an SC/CASA state end product, a Free Trade Agreement country end product other than a Bahrainian end product, a Korean end product, a Moroccan end product, a Panamanian end product, or a Peruvian end product or, at the Contractor’s option, a domestic end product.
(d) The contract price does not include duty for end products or components for which the Contractor will claim duty-free entry.
(End of clause)
252.225-7037 Evaluation of Offers for Air Circuit Breakers.
As prescribed in 225.7006-4(a), use the following provision:
EVALUATION OF OFFERS FOR AIR CIRCUIT BREAKERS (JUN 2005)
(a) The offeror shall specify, in its offer, any intent to furnish air circuit breakers that are not manufactured in the United States or its outlying areas, Canada, or the United Kingdom.
(b) The Contracting Officer will evaluate offers by adding a factor of 50 percent to the offered price of air circuit breakers that are not manufactured in the United States or its outlying areas, Canada, or the United Kingdom.
(End of provision)
252.225-7038 Restriction on Acquisition of Air Circuit Breakers.
As prescribed in 225.7006-4(b), use the following clause:
RESTRICTION ON ACQUISITION OF AIR CIRCUIT BREAKERS (JUN 2005)
Unless otherwise specified in its offer, the Contractor shall deliver under this contract air circuit breakers manufactured in the United States or its outlying areas, Canada, or the United Kingdom.
(End of clause)
252.225-7039 Defense Contractors Performing Private Security Functions Outside the United States.
As prescribed in 225.302-6, insert the following clause:
DEFENSE CONTRACTORS PERFORMING PRIVATE SECURITY FUNCTIONS
OUTSIDE THE UNITED STATES (JUN 2016)
(a) Definitions. As used in this clause—
“Full cooperation”—
(1) Means disclosure to the Government of the information sufficient to identify the nature and extent of the incident and the individuals responsible for the conduct. It includes providing timely and complete response to Government auditors' and investigators' requests for documents and access to employees with information;
(2) Does not foreclose any contractor rights arising in law, the FAR or the terms of the contract. It does not require—
(i) The contractor to waive its attorney-client privilege or the protections afforded by the attorney work product doctrine; or
(ii) Any officer, director, owner, or employee of the contractor, including a sole proprietor, to waive his or her attorney-client privilege or Fifth Amendment rights; and
(3) Does not restrict the contractor from—
(i) Conducting an internal investigation; or
(ii) Defending a proceeding or dispute arising under the contract or related to a potential or disclosed violation.
“Private security functions” means the following activities engaged in by a contractor:
(1) Guarding of personnel, facilities, designated sites or property of a Federal agency, the contractor or subcontractor, or a third party.
(2) Any other activity for which personnel are required to carry weapons in the performance of their duties in accordance with the terms of this contract.
(b) Applicability. If this contract is performed both in a designated area and in an area that is not designated, the clause only applies to performance in the designated area. Designated areas are areas outside the United States of—
(1) Contingency operations;
(2) Combat operations, as designated by the Secretary of Defense;
(3) Other significant military operations (as defined in 32 CFR part 159), designated by the Secretary of Defense upon agreement of the Secretary of State;
(4) Peace operations, consistent with Joint Publication 3-07.3; or
(5) Other military operations or military exercises, when designated by the Combatant Commander.
(c) Requirements. The Contractor shall—
(1) Ensure that all Contractor personnel who are responsible for performing private security functions under this contract comply with 32 CFR part 159 and any orders, directives, or instructions to contractors performing private security functions that are identified in the contract for—
(ii) Authorizing, accounting for and registering in Synchronized Predeployment and Operational Tracker (SPOT), weapons to be carried by or available to be used by personnel performing private security functions;
(C) Persons are killed or injured or property is destroyed as a result of conduct by Contractor personnel;
(D) A weapon is discharged against personnel performing private security functions or personnel performing such functions believe a weapon was so discharged; or
(E) Active, non-lethal countermeasures (other than the discharge of a weapon) are employed by personnel performing private security functions in response to a perceived immediate threat;
(2) Ensure that Contractor personnel who are responsible for performing private security functions under this contract are briefed on and understand their obligation to comply with—
(i) Qualification, training, screening (including, if applicable, thorough background checks) and security requirements established by 32 CFR part 159;
(ii) Applicable laws and regulations of the United States and the host country and applicable treaties and international agreements regarding performance of private security functions;
(iii) Orders, directives, and instructions issued by the applicable Combatant Commander or relevant Chief of Mission relating to weapons, equipment, force protection, security, health, safety, or relations and interaction with locals; and
(iv) Rules on the use of force issued by the applicable Combatant Commander or relevant Chief of Mission for personnel performing private security functions;
(3) Provide full cooperation with any Government-authorized investigation of incidents reported pursuant to paragraph (c)(1)(iv) of this clause and incidents of alleged misconduct by personnel performing private security functions under this contract by providing—
(4) Comply with ANSI/ASIS PSC.1-2012, American National Standard, Management System for Quality of Private Security Company Operations—Requirements with Guidance or the International Standard ISO 18788, Management System for Private Security Operations—Requirements with Guidance (located at http://www.acq.osd.mil/log/PS/psc.html).
(d) Remedies. In addition to other remedies available to the Government—
(1) The Contracting Officer may direct the Contractor, at its own expense, to remove and replace any Contractor or subcontractor personnel performing private security functions who fail to comply with or violate applicable requirements of this clause or 32 CFR part 159. Such action may be taken at the Government's discretion without prejudice to its rights under any other provision of this contract;
(2) The Contractor’s failure to comply with the requirements of this clause will be included in appropriate databases of past performance and considered in any responsibility determination or evaluation of past performance; and
(3) If this is an award-fee contract, the Contractor's failure to comply with the requirements of this clause shall be considered in the evaluation of the Contractor's performance during the relevant evaluation period, and the Contracting Officer may treat such failure to comply as a basis for reducing or denying award fees for such period or for recovering all or part of award fees previously paid for such period.
(e) Rule of construction. The duty of the Contractor to comply with the requirements of this clause shall not be reduced or diminished by the failure of a higher- or lower-tier Contractor or subcontractor to comply with the clause requirements or by a failure of the contracting activity to provide required oversight.
(f) Subcontracts. The Contractor shall include the substance of this clause, including this paragraph (f), in subcontracts, including subcontracts for commercial items, when private security functions will be performed outside the United States in areas of—
(1) Contingency operations;
(2) Combat operations, as designated by the Secretary of Defense;
(3) Other significant military operations (as defined in 32 CFR part 159), designated by the Secretary of Defense upon agreement of the Secretary of State;
(4) Peace operations, consistent with Joint Publication 3-07.3; or
(5) Other military operations or military exercises, when designated by the Combatant Commander.
(End of clause)
252.225-7040 Contractor Personnel Supporting U.S. Armed Forces Deployed Outside the United States.
As prescribed in 225.371-5(a), use the following clause:
CONTRACTOR PERSONNEL SUPPORTING U.S. ARMED FORCES DEPLOYED
OUTSIDE THE UNITED STATES (OCT 2015)
(a) Definitions. As used in this clause—
“Combatant Commander” means the commander of a unified or specified combatant command established in accordance with 10 U.S.C. 161.
“Contractors authorized to accompany the Force,” or “CAAF,” means contractor personnel, including all tiers of subcontractor personnel, who are authorized to accompany U.S. Armed Forces in applicable operations and have been afforded CAAF status through a letter of authorization. CAAF generally include all U.S. citizen n and third-country national employees not normally residing within the operational area whose area of performance is in the direct vicinity of U.S. Armed Forces and who routinely are collocated with the U.S. Armed Forces (especially in non-permissive environments). Personnel collocated with U.S. Armed Forces shall be afforded CAAF status through a letter of authorization. In some cases, Combatant Commander subordinate commanders may designate mission-essential host nation or local national contractor employees (e.g., interpreters) as CAAF. CAAF includes contractors previously identified as contractors deploying with the U.S. Armed Forces. CAAF status does not apply to contractor personnel in support of applicable operations within the boundaries and territories of the United States.
“Designated operational area” means a geographic area designated by the combatant commander or subordinate joint force commander for the conduct or support of specified military operations.
“Designated reception site” means the designated place for the reception, staging, integration, and onward movement of contractors deploying during a contingency. The designated reception site includes assigned joint reception centers and other Service or private reception sites.
“Law of war” means that part of international law that regulates the conduct of armed hostilities. The law of war encompasses all international law for the conduct of hostilities binding on the United States or its individual citizens, including treaties and international agreements to which the United States is a party, and applicable customary international law.
“Non-CAAF” means personnel who are not designated as CAAF, such as local national (LN) employees and non-LN employees who are permanent residents in the operational area or third-country nationals not routinely residing with U.S. Armed Forces (and third-country national expatriates who are permanent residents in the operational area) who perform support functions away from the close proximity of, and do not reside with, U.S. Armed Forces. Government-furnished support to non-CAAF is typically limited to force protection, emergency medical care, and basic human needs (e.g., bottled water, latrine facilities, security, and food when necessary) when performing their jobs in the direct vicinity of U.S. Armed Forces. Non-CAAF status does not apply to contractor personnel in support of applicable operations within the boundaries and territories of the United States.
“Subordinate joint force commander” means a sub-unified commander or joint task force commander.
(b) General.
(1) This clause applies to both CAAF and non-CAAF when performing in a designated operational area outside the United States to support U.S. Armed Forces deployed outside the United States in—
(i) Contingency operations;
(ii) Peace operations, consistent with Joint Publication 3-07.3; or
(iii) Other military operations or military exercises, when designated by the Combatant Commander or as directed by the Secretary of Defense.
(2) Contract performance in support of U.S. Armed Forces deployed outside the United States may require work in dangerous or austere conditions. Except as otherwise provided in the contract, the Contractor accepts the risks associated with required contract performance in such operations.
(3) When authorized in accordance with paragraph (j) of this clause to carry arms for personal protection, Contractor personnel are only authorized to use force for individual self-defense.
(4) Unless immune from host nation jurisdiction by virtue of an international agreement or international law, inappropriate use of force by contractor personnel supporting the U.S. Armed Forces can subject such personnel to United States or host nation prosecution and civil liability (see paragraphs (d) and (j)(3) of this clause).
(5) Service performed by Contractor personnel subject to this clause is not active duty or service under 38 U.S.C. 106 note.
(c) Support.
(1)(i) The Combatant Commander will develop a security plan for protection of Contractor personnel in locations where there is not sufficient or legitimate civil authority, when the Combatant Commander decides it is in the interests of the Government to provide security because—
(A) The Contractor cannot obtain effective security services;
(B) Effective security services are unavailable at a reasonable cost; or
(C) Threat conditions necessitate security through military means.
(ii) In appropriate cases, the Combatant Commander may provide security through military means, commensurate with the level of security provided DoD civilians.
(2)(i) Generally, CAAF will be afforded emergency medical and dental care if injured while supporting applicable operations. Additionally, non-CAAF employees who are injured while in the vicinity of U. S. Armed Forces will normally receive emergency medical and dental care. Emergency medical and dental care includes medical care situations in which life, limb, or eyesight is jeopardized. Examples of emergency medical and dental care include examination and initial treatment of victims of sexual assault; refills of prescriptions for life-dependent drugs; repair of broken bones, lacerations, infections; and traumatic injuries to the dentition. Hospitalization will be limited to stabilization and short-term medical treatment with an emphasis on return to duty or placement in the patient movement system.
(ii) When the Government provides medical treatment or transportation of Contractor personnel to a selected civilian facility, the Contractor shall ensure that the Government is reimbursed for any costs associated with such treatment or transportation.
(iii) Medical or dental care beyond this standard is not authorized.
(3) Contractor personnel must have a Synchronized Predeployment and Operational Tracker (SPOT)-generated letter of authorization signed by the Contracting Officer in order to process through a deployment center or to travel to, from, or within the designated operational area. The letter of authorization also will identify any additional authorizations, privileges, or Government support that Contractor personnel are entitled to under this contract. Contractor personnel who are issued a letter of authorization shall carry it with them at all times while deployed.
(4) Unless specified elsewhere in this contract, the Contractor is responsible for all other support required for its personnel engaged in the designated operational area under this contract.
(d) Compliance with laws and regulations.
(1) The Contractor shall comply with, and shall ensure that its personnel supporting U.S. Armed Forces deployed outside the United States as specified in paragraph (b)(1) of this clause are familiar with and comply with, all applicable—
(i) United States, host country, and third country national laws;
(ii) Provisions of the law of war, as well as any other applicable treaties and international agreements;
(iii) United States regulations, directives, instructions, policies, and procedures; and
(iv) Orders, directives, and instructions issued by the Combatant Commander, including those relating to force protection, security, health, safety, or relations and interaction with local nationals.
(2) The Contractor shall institute and implement an effective program to prevent violations of the law of war by its employees and subcontractors, including law of war training in accordance with paragraph (e)(1)(vii) of this clause.
(3) The Contractor shall ensure that CAAF and non-CAAF are aware—
(i) Of the DoD definition of “sexual assault” in DoD Directive 6495.01, Sexual Assault Prevention and Response Program;
(ii) That the offenses addressed by the definition are covered under the Uniform Code of Military Justice (see paragraph (e)(2)(iv) of this clause). Other sexual misconduct may constitute offenses under the Uniform Code of Military Justice, Federal law, such as the Military Extraterritorial Jurisdiction Act, or host nation laws; and
(iii) That the offenses not covered by the Uniform Code of Military Justice may nevertheless have consequences to the contractor employees (see paragraph (h)(1) of this clause).
(4) The Contractor shall report to the appropriate investigative authorities, identified in paragraph (d)(6) of this clause, any alleged offenses under—
(i) The Uniform Code of Military Justice (chapter 47 of title 10, United States Code) (applicable to contractors serving with or accompanying an armed force in the field during a declared war or contingency operations); or
(ii) The Military Extraterritorial Jurisdiction Act (chapter 212 of title 18, United States Code).
(5) The Contractor shall provide to all contractor personnel who will perform work on a contract in the deployed area, before beginning such work, information on the following:
(i) How and where to report an alleged crime described in paragraph (d)(4) of this clause.
(ii) Where to seek victim and witness protection and assistance available to contractor personnel in connection with an alleged offense described in paragraph (d)(4) of this clause.
(iii) That this section does not create any rights or privileges that are not authorized by law or DoD policy.
(6) The appropriate investigative authorities to which suspected crimes shall be reported include the following—
(i) US Army Criminal Investigation Command at http://www.cid.army.mil/reportacrime.html;
(ii) Air Force Office of Special Investigations at http://www.osi.andrews.af.mil/library/factsheets/factsheet.asp?id=14522;
(iii) Navy Criminal Investigative Service at http://www.ncis.navy.mil/Pages/publicdefault.aspx;
(iv) Defense Criminal Investigative Service at http://www.dodig.mil/HOTLINE/index.html;
(v) To any command of any supported military element or the command of any base.
(7) Personnel seeking whistleblower protection from reprisals for reporting criminal acts shall seek guidance through the DoD Inspector General hotline at 800-424-9098 or www.dodig.mil/HOTLINE/index.html. Personnel seeking other forms of victim or witness protections should contact the nearest military law enforcement office.
(8)(i) The Contractor shall ensure that Contractor employees supporting the U.S. Armed Forces are aware of their rights to—
(A) Hold their own identity or immigration documents, such as passport or driver’s license, regardless of the documents’ issuing authority;
(B) Receive agreed upon wages on time;
(C) Take lunch and work-breaks;
(D) Elect to terminate employment at any time;
(E) Identify grievances without fear of reprisal;
(F) Have a copy of their employment contract in a language they understand;
(G) Receive wages that are not below the legal host-country minimum wage;
(H) Be notified of their rights, wages, and prohibited activities prior to signing their employment contract; and
(I) If housing is provided, live in housing that meets host-country housing and safety standards.
(ii) The Contractor shall post these rights in employee work spaces in English and in any foreign language(s) spoken by a significant portion of the workforce.
(iii) The Contractor shall enforce the rights of Contractor personnel supporting the U.S. Armed Forces.
(e) Preliminary personnel requirements.
(1) The Contractor shall ensure that the following requirements are met prior to deploying CAAF (specific requirements for each category will be specified in the statement of work or elsewhere in the contract):
(i) All required security and background checks are complete and acceptable.
(ii) All CAAF deploying in support of an applicable operation—
(A) Are medically, dentally, and psychologically fit for deployment and performance of their contracted duties;
(B) Meet the minimum medical screening requirements, including theater-specific medical qualifications as established by the geographic Combatant Commander (as posted to the Geographic Combatant Commander’s website or other venue); and
(C) Have received all required immunizations as specified in the contract.
(1) During predeployment processing, the Government will provide, at no cost to the Contractor, any military-specific immunizations and/or medications not available to the general public.
(2) All other immunizations shall be obtained prior to arrival at the deployment center.
(3) All CAAF and selected non-CAAF, as specified in the statement of work, shall bring to the designated operational area a copy of the U.S. Centers for Disease Control and Prevention (CDC) Form 731, International Certificate of Vaccination or Prophylaxis as Approved by the World Health Organization, (also known as "shot record" or "Yellow Card") that shows vaccinations are current.
(iii) Deploying personnel have all necessary passports, visas, and other documents required to enter and exit a designated operational area and have a Geneva Conventions identification card, or other appropriate DoD identity credential, from the deployment center.
(iv) Special area, country, and theater clearance is obtained for all personnel deploying. Clearance requirements are in DoD Directive 4500.54E, DoD Foreign Clearance Program. For this purpose, CAAF are considered non-DoD contactor personnel traveling under DoD sponsorship.
(v) All deploying personnel have received personal security training. At a minimum, the training shall—
(A) Cover safety and security issues facing employees overseas;
(B) Identify safety and security contingency planning activities; and
(C) Identify ways to utilize safety and security personnel and other resources appropriately.
(vi) All personnel have received isolated personnel training, if specified in the contract, in accordance with DoD Instruction 1300.23, Isolated Personnel Training for DoD Civilian and Contractors.
(vii) Personnel have received law of war training as follows:
(A) Basic training is required for all CAAF. The basic training will be provided through—
(1) A military-run training center; or
(2) A web-based source, if specified in the contract or approved by the Contracting Officer.
(B) Advanced training, commensurate with their duties and responsibilities, may be required for some Contractor personnel as specified in the contract.
(2) The Contractor shall notify all personnel who are not a host country national, or who are not ordinarily resident in the host country, that—
(i) Such employees, and dependents residing with such employees, who engage in conduct outside the United States that would constitute an offense punishable by imprisonment for more than one year if the conduct had been engaged in within the special maritime and territorial jurisdiction of the United States, may potentially be subject to the criminal jurisdiction of the United States in accordance with the Military Extraterritorial Jurisdiction Act of 2000 (18 U.S.C. 3621, et seq.);
(ii) Pursuant to the War Crimes Act (18 U.S.C. 2441), Federal criminal jurisdiction also extends to conduct that is determined to constitute a war crime when committed by a civilian national of the United States;
(iii) Other laws may provide for prosecution of U.S. nationals who commit offenses on the premises of U.S. diplomatic, consular, military or other U.S. Government missions outside the United States (18 U.S.C. 7(9)); and
(iv) In time of declared war or a contingency operation, CAAF are subject to the jurisdiction of the Uniform Code of Military Justice under 10 U.S.C. 802(a)(10).
(v) Such employees are required to report offenses alleged to have been committed by or against Contractor personnel to appropriate investigative authorities.
(vi) Such employees will be provided victim and witness protection and assistance.
(f) Processing and departure points. CAAF shall—
(1) Process through the deployment center designated in the contract, or as otherwise directed by the Contracting Officer, prior to deploying. The deployment center will conduct deployment processing to ensure visibility and accountability of Contractor personnel and to ensure that all deployment requirements are met, including the requirements specified in paragraph (e)(1) of this clause;
(2) Use the point of departure and transportation mode directed by the Contracting Officer; and
(3) Process through a designated reception site (DRS) upon arrival at the deployed location. The DRS will validate personnel accountability, ensure that specific designated operational area entrance requirements are met, and brief Contractor personnel on theater-specific policies and procedures.
(g) Personnel data.
(1) The Contractor shall use the Synchronized Predeployment and Operational Tracker (SPOT) web-based system, to enter and maintain the data for all CAAF and, as designated by USD(AT&L) or the Combatant Commander, non-CAAF supporting U.S. Armed Forces deployed outside the United States as specified in paragraph (b)(1) of this clause.
(2) The Contractor shall enter the required information about their contractor personnel prior to deployment and shall continue to use the SPOT web-based system at https://spot.dmdc.mil to maintain accurate, up-to-date information throughout the deployment for all Contractor personnel. Changes to status of individual Contractor personnel relating to their in-theater arrival date and their duty location, to include closing out the deployment with their proper status (e.g., mission complete, killed, wounded) shall be annotated within the SPOT database in accordance with the timelines established in the SPOT Business Rules at http://www.acq.osd.mil/log/PS/ctr_mgt_accountability.html.
(h) Contractor personnel.
(1) The Contracting Officer may direct the Contractor, at its own expense, to remove and replace any Contractor personnel who jeopardize or interfere with mission accomplishment or who fail to comply with or violate applicable requirements of this contract. Such action may be taken at the Government’s discretion without prejudice to its rights under any other provision of this contract, including the Termination for Default clause.
(2) The Contractor shall identify all personnel who occupy a position designated as mission essential and ensure the continuity of essential Contractor services during designated operations, unless, after consultation with the Contracting Officer, Contracting Officer’s representative, or local commander, the Contracting Officer directs withdrawal due to security conditions.
(3) The Contractor shall ensure that Contractor personnel follow the guidance at paragraph (e)(2)(v) of this clause and any specific Combatant Commander guidance on reporting offenses alleged to have been committed by or against Contractor personnel to appropriate investigative authorities.
(4) Contractor personnel shall return all U.S. Government-issued identification, to include the Common Access Card, to appropriate U.S. Government authorities at the end of their deployment (or, for non-CAAF, at the end of their employment under this contract).
(i) Military clothing and protective equipment.
(1) Contractor personnel are prohibited from wearing military clothing unless specifically authorized in writing by the Combatant Commander. If authorized to wear military clothing, Contractor personnel must—
(i) Wear distinctive patches, arm bands, nametags, or headgear, in order to be distinguishable from military personnel, consistent with force protection measures; and
(ii) Carry the written authorization with them at all times.
(2) Contractor personnel may wear military-unique organizational clothing and individual equipment (OCIE) required for safety and security, such as ballistic, nuclear, biological, or chemical protective equipment.
(3) The deployment center, or the Combatant Commander, shall issue OCIE and shall provide training, if necessary, to ensure the safety and security of Contractor personnel.
(4) The Contractor shall ensure that all issued OCIE is returned to the point of issue, unless otherwise directed by the Contracting Officer.
(j) Weapons.
(1) If the Contractor requests that its personnel performing in the designated operational area be authorized to carry weapons for individual self-defense, the request shall be made through the Contracting Officer to the Combatant Commander, in accordance with DoD Instruction 3020.41, Operational Contractor Support. The Combatant Commander will determine whether to authorize in-theater Contractor personnel to carry weapons and what weapons and ammunition will be allowed.
(2) If Contractor personnel are authorized to carry weapons in accordance with paragraph (j)(1) of this clause, the Contracting Officer will notify the Contractor what weapons and ammunition are authorized.
(3) The Contractor shall ensure that its personnel who are authorized to carry weapons—
(i) Are adequately trained to carry and use them—
(A) Safely;
(B) With full understanding of, and adherence to, the rules of the use of force issued by the Combatant Commander; and
(C) In compliance with applicable agency policies, agreements, rules, regulations, and other applicable law;
(ii) Are not barred from possession of a firearm by 18 U.S.C. 922;
(iii) Adhere to all guidance and orders issued by the Combatant Commander regarding possession, use, safety, and accountability of weapons and ammunition;
(iv) Comply with applicable Combatant Commander and local commander force-protection policies; and
(v) Understand that the inappropriate use of force could subject them to U.S. or host-nation prosecution and civil liability.
(4) Whether or not weapons are Government-furnished, all liability for the use of any weapon by Contractor personnel rests solely with the Contractor and the Contractor employee using such weapon.
(5) Upon redeployment or revocation by the Combatant Commander of the Contractor’s authorization to issue firearms, the Contractor shall ensure that all Government-issued weapons and unexpended ammunition are returned as directed by the Contracting Officer.
(k) Vehicle or equipment licenses. Contractor personnel shall possess the required licenses to operate all vehicles or equipment necessary to perform the contract in the designated operational area.
(l) Purchase of scarce goods and services. If the Combatant Commander has established an organization for the designated operational area whose function is to determine that certain items are scarce goods or services, the Contractor shall coordinate with that organization local purchases of goods and services designated as scarce, in accordance with instructions provided by the Contracting Officer.
(m) Evacuation.
(1) If the Combatant Commander orders a mandatory evacuation of some or all personnel, the Government will provide assistance, to the extent available, to United States and third country national Contractor personnel.
(2) In the event of a non-mandatory evacuation order, unless authorized in writing by the Contracting Officer, the Contractor shall maintain personnel on location sufficient to meet obligations under this contract.
(n) Next of kin notification and personnel recovery.
(1) The Contractor shall be responsible for notification of the employee-designated next of kin in the event an employee dies, requires evacuation due to an injury, or is isolated, missing, detained, captured, or abducted.
(2) In the case of isolated, missing, detained, captured, or abducted Contractor personnel, the Government will assist in personnel recovery actions in accordance with DoD Directive 3002.01E, Personnel Recovery in the Department of Defense.
(o) Mortuary affairs. Contractor personnel who die while in support of the U.S. Armed Forces shall be covered by the DoD mortuary affairs program as described in DoD Directive 1300.22, Mortuary Affairs Policy, and DoD Instruction 3020.41, Operational Contractor Support.
(p) Changes. In addition to the changes otherwise authorized by the Changes clause of this contract, the Contracting Officer may, at any time, by written order identified as a change order, make changes in the place of performance or Government-furnished facilities, equipment, material, services, or site. Any change order issued in accordance with this paragraph (p) shall be subject to the provisions of the Changes clause of this contract.
(q) Subcontracts. The Contractor shall incorporate the substance of this clause, including this paragraph (q), in all subcontracts when subcontractor personnel are supporting U.S. Armed Forces deployed outside the United States in—
(1) Contingency operations;
(2) Peace operations consistent with Joint Publication 3-07.3; or
(3) Other military operations or military exercises, when designated by the Combatant Commander or as directed by the Secretary of Defense.
(End of clause)
252.225-7041 Correspondence in English.
As prescribed in 225.1103(2), use the following clause:
CORRESPONDENCE IN ENGLISH (JUN 1997)
The Contractor shall ensure that all contract correspondence that is addressed to the United States Government is submitted in English or with an English translation.
(End of clause)
252.225-7042 Authorization to Perform.
As prescribed in 225.1103(3), use the following provision:
AUTHORIZATION TO PERFORM (APR 2003)
The offeror represents that it has been duly authorized to operate and to do business in the country or countries in which the contract is to be performed.
(End of provision)
252.225-7043 Antiterrorism/Force Protection for Defense Contractors Outside the United States.
As prescribed in 225.372-2, use the following clause:
ANTITERRORISM/FORCE PROTECTION POLICY FOR DEFENSE CONTRACTORS OUTSIDE THE UNITED STATES (JUN 2015)
(a) Definition. “United States,” as used in this clause, means, the 50 States, the District of Columbia, and outlying areas.
(b) Except as provided in paragraph (c) of this clause, the Contractor and its subcontractors, if performing or traveling outside the United States under this contract, shall
(1) Affiliate with the Overseas Security Advisory Council, if the Contractor or subcontractor is a U.S. entity;
(2) Ensure that Contractor and subcontractor personnel who are U.S. nationals and are in-country on a non-transitory basis, register with the U.S. Embassy, and that Contractor and subcontractor personnel who are third country nationals comply with any security related requirements of the Embassy of their nationality;
(3) Provide, to Contractor and subcontractor personnel, antiterrorism/force protection awareness information commensurate with that which the Department of Defense (DoD) provides to its military and civilian personnel and their families, to the extent such information can be made available prior to travel outside the United States; and
(4) Obtain and comply with the most current antiterrorism/force protection guidance for Contractor and subcontractor personnel.
(c) The requirements of this clause do not apply to any subcontractor that is
(1) A foreign government;
(2) A representative of a foreign government; or
(3) A foreign corporation wholly owned by a foreign government.
(d) Information and guidance pertaining to DoD antiterrorism/force protection can be obtained from (Contracting Officer to insert applicable information cited in
PGI 225.372-1).
(End of clause)
252.225-7044 Balance of Payments Program--Construction Material.
Basic. As prescribed in 225.7503(a) and (a)(1), use the following clause:
BALANCE OF PAYMENTS PROGRAM—CONSTRUCTION MATERIAL—BASIC (NOV 2014)
(a) Definitions. As used in this clause—
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means any article, material, or supply incorporated directly into construction material.
“Construction material” means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.
“Cost of components” means—
(i) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or
(ii) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.
“Domestic construction material” means—
(i) An unmanufactured construction material mined or produced in the United States; or
(ii) A construction material manufactured in the United States, if—
(A) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic; or
(B) The construction material is a COTS item.
“United States” means the 50 States, the District of Columbia, and outlying areas.
(b) Domestic preference. This clause implements the Balance of Payments Program by providing a preference for domestic construction material. The Contractor shall use only domestic construction material in performing this contract, except for—
(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation;
(2) Information technology that is a commercial item; or
(3) The construction material or components listed by the Government as follows:
___________________________________________________________________________
[Contracting Officer to list applicable excepted materials or indicate “none”]
(End of clause)
Alternate I. As prescribed in 225.7503(a) and (a)(2), use the following clause, which adds definitions for “South Caucasus/Central and South Asian (SC/CASA) state” and “SC/CASA state construction material” to paragraph (a), and uses “domestic construction material or SC/CASA state construction material” instead of “domestic construction material” in the second sentence of paragraph (b):
BALANCE OF PAYMENTS PROGRAM—CONSTRUCTION MATERIAL—ALTERNATE I (NOV 2014)
(a) Definitions. As used in this clause—
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in 46 U.S.C. 40102(4), such as agricultural products and petroleum products.
“Component” means any article, material, or supply incorporated directly into construction material.
“Construction material” means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.
“Cost of components” means—
(i) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or
(ii) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.
“Domestic construction material” means—
(i) An unmanufactured construction material mined or produced in the United States; or
(ii) A construction material manufactured in the United States, if—
(A) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic; or
(B) The construction material is a COTS item.
“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.
“SC/CASA state construction material” means construction material that
(i) Is wholly the growth, product, or manufacture of an SC/CASA state; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different construction material distinct from the material from which it was transformed.
“United States” means the 50 States, the District of Columbia, and outlying areas.
(b) Domestic preference. This clause implements the Balance of Payments Program by providing a preference for domestic construction material. The Contractor shall use only domestic construction material or SC/CASA state construction material in performing this contract, except for—
(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation;
(2) Information technology that is a commercial item; or
(3) The construction material or components listed by the Government as follows:
____________________________________________________________________________
[Contracting Officer to list applicable excepted materials or indicate “none”].
(End of clause)
252.225-7045 Balance of Payments Program--Construction Material Under Trade Agreements.
Basic. As prescribed in 225.7503(b) and (b)(1), use the following clause:
BALANCE OF PAYMENTS PROGRAM—CONSTRUCTION MATERIAL UNDER TRADE AGREEMENTS—BASIC (SEP 2016)
(a) Definitions. As used in this clause—
“Caribbean Basin country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.
“Component” means any article, material, or supply incorporated directly into construction material.
“Construction material” means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.
“Cost of components” means—
(i) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or
(ii) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.
“Designated country” means—
(i) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);
(ii) A Free Trade Agreement country (Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);
(iii) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or
(iv) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).bbean Basin country construction material.
“Domestic construction material” means—
(i) An unmanufactured construction material mined or produced in the United States; or
(ii) A construction material manufactured in the United States, if—
(A) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic; or
(B) The construction material is a COTS item.
“Free Trade Agreement country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different construction material distinct from the material from which it was transformed.
“Least developed country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a least developed country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.
“United States” means the 50 States, the District of Columbia, and outlying areas.
“WTO GPA country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a WTO GPA country;
or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.
(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA and Free Trade Agreements apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for designated country construction materials.
(c) The Contractor shall use only domestic or designated country construction material in performing this contract, except for—
(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation;
(2) Information technology that is a commercial item; or
(3) The construction material or components listed by the Government as follows:
___________________________________________________________________________
[Contracting Officer to list applicable excepted materials or indicate “none”]
(End of clause)
Alternate I. As prescribed in 225.7503(b) and (b)(2), use the following clause, which adds “Bahrainian or Mexican construction material” to paragraph (a), and uses a different paragraph (b) and (c) than the basic clause:
BALANCE OF PAYMENTS PROGRAM—CONSTRUCTION MATERIAL UNDER TRADE AGREEMENTS—ALTERNATE I (SEP 2016)
(a) Definitions. As used in this clause—
“Bahrainian or Mexican construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of Bahrain or Mexico; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in Bahrain or Mexico into a new and different construction material distinct from the materials from which it was transformed.
“Caribbean Basin country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.
“Component” means any article, material, or supply incorporated directly into construction material.
“Construction material” means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.
“Cost of components” means—
(i) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or
(ii) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.
“Designated country” means—
(i) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);
(ii) A Free Trade Agreement country (Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);
(iii) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or
(iv) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).
“Designated country construction material” means a construction material that is a WTO GPA country construction material, a Free Trade Agreement country construction material, a least developed country construction material, or a Caribbean Basin country construction material.
“Domestic construction material” means—
(i) An unmanufactured construction material mined or produced in the United States; or
(ii) A construction material manufactured in the United States, if—
(A) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic; or
(B) The construction material is a COTS item.
“Free Trade Agreement country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different construction material distinct from the material from which it was transformed.
“Least developed country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a least developed country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.
“United States” means the 50 States, the District of Columbia, and outlying areas.
“WTO GPA country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a WTO GPA country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.
(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA and all Free Trade Agreements except NAFTA and the Bahrain Free Trade Agreement apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for designated country construction material other than Bahrainian or Mexican construction material.
(c) The Contractor shall use only domestic or designated country construction material other than Bahrainian or Mexican construction material in performing this contract, except for—
(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation; or
(2) Information technology that is a commercial item; or
(3) The construction material or components listed by the Government as follows:
__________________________________________________________________________
[Contracting Officer to list applicable excepted materials or indicate “none”].
(End of clause)
Alternate II. As prescribed in 225.7503(b) and (b)(3), use the following clause, which adds “South Caucasus/Central and South Asian (SC/CASA) state” and “SC/CASA state construction material” to paragraph (a), uses a different paragraph (b) and introductory text for paragraph (c) than the basic clause, and adds paragraph (d):
BALANCE OF PAYMENTS PROGRAM—CONSTRUCTION MATERIAL UNDER TRADE AGREEMENTS—ALTERNATE II (SEP 2016)
(a) Definitions. As used in this clause—
“Caribbean Basin country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.
“Component” means any article, material, or supply incorporated directly into construction material.
“Construction material” means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.
“Cost of components” means—
(i) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or
(ii) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.
“Designated country” means—
(i) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);
(ii) A Free Trade Agreement country (Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);
(iii) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or
(iv) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).
“Designated country construction material” means a construction material that is a WTO GPA country construction material, a Free Trade Agreement country construction material, a least developed country construction material, or a Caribbean Basin country construction material.
“Domestic construction material” means—
(i) An unmanufactured construction material mined or produced in the United States; or
(ii) A construction material manufactured in the United States, if—
(A) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic; or
(B) The construction material is a COTS item.
“Free Trade Agreement country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different construction material distinct from the material from which it was transformed.
“Least developed country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a least developed country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.
“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.
“SC/CASA state construction material” means construction material that
(i) Is wholly the growth, product, or manufacture of an SC/CASA state; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different construction material distinct from the material from which it was transformed.
“United States” means the 50 States, the District of Columbia, and outlying areas.
“WTO GPA country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a WTO GPA country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.
(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA, Free Trade Agreements, and other waivers relating to acquisitions in support of operations in Afghanistan apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for SC/CASA state and designated country construction materials.
(c) The Contractor shall use only domestic, SC/CASA state, or designated country construction material in performing this contract, except for—
(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation;
(2) Information technology that is a commercial item; or
(3) The construction material or components listed by the Government as follows:
_________________________________________________________________________
[Contracting Officer to list applicable excepted materials or indicate “none”].
(d) If the Contractor is from an SC/CASA state, the Contractor shall inform its government of its participation in this acquisition and that it generally will not have such opportunity in the future unless its government provides reciprocal procurement opportunities to U.S. products and services and suppliers of such products and services.
(End of clause)
Alternate III. As prescribed in 225.7503(b) and (b)(4), use the following clause, which adds “South Caucasus/Central and South Asian (SC/CASA state” and “SC/CASA state construction material” to paragraph(a), uses a different paragraph (b) and introductory text for paragraph (c) than the basic clause, and adds paragraph (d):
BALANCE OF PAYMENTS PROGRAM—CONSTRUCTION MATERIAL UNDER TRADE AGREEMENTS—ALTERNATE III (SEP 2016)
(a) Definitions. As used in this clause—
“Caribbean Basin country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a Caribbean Basin country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Caribbean Basin country into a new and different construction material distinct from the materials from which it was transformed.
“Commercially available off-the-shelf (COTS) item”—
(i) Means any item of supply (including construction material) that is—
(A) A commercial item (as defined in paragraph (1) of the definition of “commercial item” in section 2.101 of the Federal Acquisition Regulation);
(B) Sold in substantial quantities in the commercial marketplace; and
(C) Offered to the Government, under a contract or subcontract at any tier, without modification, in the same form in which it is sold in the commercial marketplace; and
(ii) Does not include bulk cargo, as defined in section 3 of the Shipping Act of 1984 (46 U.S.C. 40102), such as agricultural products and petroleum products.
“Component” means any article, material, or supply incorporated directly into construction material.
“Construction material” means an article, material, or supply brought to the construction site by the Contractor or a subcontractor for incorporation into the building or work. The term also includes an item brought to the site preassembled from articles, materials, or supplies. However, emergency life safety systems, such as emergency lighting, fire alarm, and audio evacuation systems, that are discrete systems incorporated into a public building or work and that are produced as complete systems, are evaluated as a single and distinct construction material regardless of when or how the individual parts or components of those systems are delivered to the construction site. Materials purchased directly by the Government are supplies, not construction material.
“Cost of components” means—
(i) For components purchased by the Contractor, the acquisition cost, including transportation costs to the place of incorporation into the end product (whether or not such costs are paid to a domestic firm), and any applicable duty (whether or not a duty-free entry certificate is issued); or
(ii) For components manufactured by the Contractor, all costs associated with the manufacture of the component, including transportation costs as described in paragraph (1) of this definition, plus allocable overhead costs, but excluding profit. Cost of components does not include any costs associated with the manufacture of the construction material.
“Designated country” means—
(i) A World Trade Organization Government Procurement Agreement (WTO GPA) country (Armenia, Aruba, Austria, Belgium, Bulgaria, Canada, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hong Kong, Hungary, Iceland, Ireland, Israel, Italy, Japan, Korea (Republic of), Latvia, Liechtenstein, Lithuania, Luxembourg, Malta, Moldova, Montenegro, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Singapore, Slovak Republic, Slovenia, Spain, Sweden, Switzerland, Taiwan (known in the World Trade Organization as “the Separate Customs Territory of Taiwan, Penghu, Kinmen, and Matsu” (Chinese Taipei)), Ukraine, or the United Kingdom);
(ii) A Free Trade Agreement country (Australia, Bahrain, Canada, Chile, Colombia, Costa Rica, Dominican Republic, El Salvador, Guatemala, Honduras, Korea (Republic of), Mexico, Morocco, Nicaragua, Panama, Peru, or Singapore);
(iii) A least developed country (Afghanistan, Angola, Bangladesh, Benin, Bhutan, Burkina Faso, Burundi, Cambodia, Central African Republic, Chad, Comoros, Democratic Republic of Congo, Djibouti, Equatorial Guinea, Eritrea, Ethiopia, Gambia, Guinea, Guinea-Bissau, Haiti, Kiribati, Laos, Lesotho, Liberia, Madagascar, Malawi, Mali, Mauritania, Mozambique, Nepal, Niger, Rwanda, Samoa, Sao Tome and Principe, Senegal, Sierra Leone, Solomon Islands, Somalia, South Sudan, Tanzania, Timor-Leste, Togo, Tuvalu, Uganda, Vanuatu, Yemen, or Zambia); or
(iv) A Caribbean Basin country (Antigua and Barbuda, Aruba, Bahamas, Barbados, Belize, Bonaire, British Virgin Islands, Curacao, Dominica, Grenada, Guyana, Haiti, Jamaica, Montserrat, Saba, St. Kitts and Nevis, St. Lucia, St. Vincent and the Grenadines, Sint Eustatius, Sint Maarten, or Trinidad and Tobago).
“Designated country construction material” means a construction material that is a WTO GPA country construction material, a Free Trade Agreement country construction material, a least developed country construction material, or a Caribbean Basin country construction material.
“Domestic construction material” means—
(i) An unmanufactured construction material mined or produced in the United States; or
(ii) A construction material manufactured in the United States, if—
(A) The cost of its components mined, produced, or manufactured in the United States exceeds 50 percent of the cost of all its components. Components of foreign origin of the same class or kind for which nonavailability determinations have been made are treated as domestic; or
(B) The construction material is a COTS item.
“Free Trade Agreement country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a Free Trade Agreement country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a Free Trade Agreement country into a new and different construction material distinct from the material from which it was transformed.
“Least developed country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a least developed country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a least developed country into a new and different construction material distinct from the materials from which it was transformed.
“South Caucasus/Central and South Asian (SC/CASA) state” means Armenia, Azerbaijan, Georgia, Kazakhstan, Kyrgyzstan, Pakistan, Tajikistan, Turkmenistan, or Uzbekistan.
“SC/CASA state construction material” means construction material that—
(i) Is wholly the growth, product, or manufacture of
An SC/CASA state; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in an SC/CASA state into a new and different construction material distinct from the material from which it was transformed.
“United States” means the 50 States, the District of Columbia, and outlying areas.
“WTO GPA country construction material” means a construction material that—
(i) Is wholly the growth, product, or manufacture of a WTO GPA country; or
(ii) In the case of a construction material that consists in whole or in part of materials from another country, has been substantially transformed in a WTO GPA country into a new and different construction material distinct from the materials from which it was transformed.
(b) This clause implements the Balance of Payments Program by providing a preference for domestic construction material. In addition, the Contracting Officer has determined that the WTO GPA, all Free Trade Agreements except NAFTA and the Bahrain Free Trade Agreement, and other waivers relating to acquisitions in support of operations in Afghanistan apply to this acquisition. Therefore, the Balance of Payments Program restrictions are waived for SC/CASA state and designated country construction material other than Bahrainian or Mexican construction material.
(c) The Contractor shall use only domestic, SC/CASA state, or designated country construction material other than Bahrainian or Mexican construction material in performing this contract, except for—
(1) Construction material valued at or below the simplified acquisition threshold in part 2 of the Federal Acquisition Regulation;
(2) Information technology that is a commercial item; or
(3) The construction material or components listed by the Government as follows:
________________________________________________________________________
[Contracting Officer to list applicable excepted materials or indicate “none”].
(d) If the Contractor is from an SC/CASA state, the Contractor shall inform its government of its participation in this acquisition and that it generally will not have such opportunity in the future unless its government provides reciprocal procurement opportunities to U.S. products and services and suppliers of such products and services.
(End of clause)
252.225-7046 Exports by Approved Community Members in Response to the Solicitation.
As prescribed in 225.7902-5(a), use the following provision:
EXPORTS BY APPROVED COMMUNITY MEMBERS IN RESPONSE TO THE SOLICITATION (JUNE 2013)
(a) Definitions. The definitions of "Approved Community", “defense articles", Defense Trade Cooperation (DTC) Treaty”, "export", “Implementing Arrangement", “qualifying defense articles”, "transfer", and "U.S. DoD Treaty-eligible requirements" in DFARS clause 252.225-7047 apply to this provision.
(b) All contract line items in the contemplated contract, except any identified in this paragraph, are intended to satisfy U.S. DoD Treaty-eligible requirements. Specific defense articles that are not U.S. DoD Treaty-eligible will be identified as such in those contract line items that are otherwise U.S. DoD Treaty-eligible.
CONTRACT LINE ITEMS NOT INTENDED TO SATISFY U.S. DoD TREATY-ELIGIBLE REQUIREMENTS:
______________________________________________________________
[Enter Contract Line Item Number(s) or enter "None"]
(c) Approved Community members responding to the solicitation may only export or transfer defense articles that specifically respond to the stated requirements of the solicitation.
(d) Subject to the other terms and conditions of the solicitation and the contemplated contract that affect the acceptability of foreign sources or foreign end products, components, parts, or materials, Approved Community members are permitted, but not required, to use the DTC Treaties for exports or transfers of qualifying defense articles in preparing a response to this solicitation.
(e) Any conduct by an offeror responding to this solicitation that falls outside the scope of the DTC Treaties, the Implementing Arrangements, and the implementing regulations of the Department of State in 22 CFR 126.16 (Australia), 22 C.F.R. 126.17 (United Kingdom), and 22 C.F.R. 126 Supplement No. 1 (exempted technologies list) is subject to all applicable International Traffic in Arms Regulations (ITAR) requirements, including any criminal, civil, and administrative penalties or sanctions, as well as all other United States statutory and regulatory requirements outside of ITAR.
(f) If the offeror uses the procedures established pursuant to the DTC Treaties, the offeror agrees that, with regard to the export or transfer of a qualifying defense article associated with responding to the solicitation, the offeror shall—
(1) Comply with the requirements and provisions of the applicable DTC Treaties, the Implementing Arrangements, and corresponding regulations (including the ITAR) of the U.S. Government and the government of Australia or of the United Kingdom, as applicable;
(2) Prior to the export or transfer of a qualifying defense article—
(i) Mark, identify, transmit, store, and handle any defense articles provided for the purpose of responding to such solicitations, as well as any defense articles provided with or developed pursuant to their responses to such solicitations, in accordance with the DTC Treaties, the Implementing Arrangements, and corresponding regulations of the United States Government and the government of Australia or the government of the United Kingdom, as applicable, including, but not limited to, the marking and classification requirements described in the applicable regulations;
(ii) Comply with the re-transfer or re-export provisions of the DTC Treaties, the Implementing Arrangements, and corresponding regulations of the United States Government and the government of Australia or the government of the United Kingdom, as applicable, including, but not limited to, the re-transfer and re-export requirements described in the applicable regulations; and
(iii) Acknowledge that any conduct that falls outside or in violation of the DTC Treaties, Implementing Arrangements, and implementing regulations of the applicable government including, but not limited to, unauthorized re-transfer or re-export in violation of the procedures established in the applicable Implementing Arrangement and implementing regulations, remains subject to applicable licensing requirements of the government of Australia, the government of the United Kingdom, and the United States Government, as applicable, including any criminal, civil, and administrative penalties or sanctions contained therein; and
(g) Representation. The offeror shall check one of the following boxes and sign the representation:
□ The offeror represents that export(s) or transfer(s) of qualifying defense articles were made in preparing its response to this solicitation and that such export(s) or transfer(s) complied with the requirements of this provision.
______________________________________________________________
Name/Title of Duly Authorized Representative Date
□ The offeror represents that no export(s) or transfer(s) of qualifying defense articles were made in preparing its response to this solicitation.
______________________________________________________________
Name/Title of Duly Authorized Representative Date
(h) Subcontracts. Flow down the substance of this provision, including this paragraph (h), but excluding the representation at paragraph (g), to any subcontractor at any tier intending to use the DTC Treaties in responding to this solicitation.
(End of provision)
252.225-7047 Exports by Approved Community Members in Performance of the Contract.
As prescribed in 225.7902-5(b), use the following clause:
EXPORTS BY APPROVED COMMUNITY MEMBERS IN PERFORMANCE OF THE CONTRACT (JUNE 2013)
(a) Definitions. As used in this clause—
"Approved Community" means the U.S. Government, U.S. entities that are registered and eligible exporters, and certain government and industry facilities in Australia or the United Kingdom that are approved and listed by the U.S. Government.
“Australia Community member” means an Australian government authority or nongovernmental entity or facility on the Australia Community list accessible at http://pmddtc.state.gov/treaties/index.html .
"Defense articles" means articles, services, and related technical data, including software, in tangible or intangible form, listed on the United States Munitions List of the International Traffic in Arms Regulations (ITAR), as modified or amended.
“Defense Trade Cooperation (DTC) Treaty" means—
(1) The Treaty Between the Government of the United States of America and the government of the United Kingdom of Great Britain and Northern Ireland concerning Defense Trade Cooperation, signed at Washington and London on June 21 and 26, 2007; or
(2) The Treaty Between the Government of the United States of America and the Government of Australia Concerning Defense Trade Cooperation, signed at Sydney on September 5, 2007.
"Export" means the initial movement of defense articles from the United States Community to the United Kingdom Community and the Australia community.
"Implementing Arrangement" means –
(1) The Implementing Arrangement Pursuant to the Treaty between the Government of the United States of America and the Government of the United Kingdom of Great Britain and Northern Ireland Concerning Defense Trade Cooperation, signed on February 14, 2008; or
(2) The Implementing Arrangement Pursuant to the Treaty between the Government of the United States of America and the Government of Australia Concerning Defense Trade Cooperation, signed on March 14, 2008.
“Qualifying defense articles” means defense articles that are not exempt from the scope of the DTC Treaties as defined in 22 CFR 126.16(g) and 22 CFR 126.17(g).
"Transfer" means the movement of previously exported defense articles within the Approved Community.
“United Kingdom Community member” means a United Kingdom government authority or nongovernmental entity or facility on the United Kingdom Community list accessible at http://pmddtc.state.gov.
"United States Community" means—
(1) Departments and agencies of the U.S. Government, including their personnel, with, as appropriate, security accreditation and a need-to-know; and
(2) Nongovernmental U.S. entities registered with the Department of State and eligible to export defense articles under U.S. law and regulation, including their employees, with, as appropriate, security accreditation and a need-to-know.
"U.S. DoD Treaty-eligible requirements" means any defense article acquired by the DoD for use in a combined military or counterterrorism operation, cooperative research, development, production or support program, or DoD end use, as described in Article 3 of the U.S.-U.K. DTC Treaty and sections 2 and 3 of the associated Implementing Arrangement; and Article 3 of the U.S.-Australia DTC Treaty and sections 2 and 3 of the associated Implementing Arrangement.
(b) All contract line items in this contract, except any identified in this paragraph, are intended to satisfy U.S. DoD Treaty-eligible requirements. Specific defense articles that are not U.S. DoD Treaty-eligible will be identified as such in those contract line items that are otherwise U.S. DoD Treaty-eligible.
CONTRACT LINE ITEMS NOT INTENDED TO SATISFY U.S. DoD TREATY-ELIGIBLE REQUIREMENTS:
______________________________________________________________
[Enter Contract Line Item Number(s) or enter "None"]
(c) Subject to the other terms and conditions of this contract that affect the acceptability of foreign sources or foreign end products, components, parts, or materials, Approved Community members are permitted, but not required, to use the DTC Treaties for exports or transfers of qualifying defense articles in performance of the contract.
(d) Any conduct by the Contractor that falls outside the scope of the DTC Treaties, the Implementing Arrangements, and 22 CFR 126.16(g) and 22 CFR 126.17(g) is subject to all applicable ITAR requirements, including any criminal, civil, and administrative penalties or sanctions, as well as all other United States statutory and regulatory requirements outside of ITAR, including, but not limited to, regulations issued by the Bureau of Alcohol, Tobacco, Firearms and Explosives found at 27 C.F.R. Parts 447, 478, and 479, which are unaffected by the DTC Treaties.
(e) If the Contractor is an Approved Community member, the Contractor agrees that—
(1) The Contractor shall comply with the requirements of the DTC Treaties, the Implementing Arrangements, the ITAR, and corresponding regulations of the U.S. Government and the government of Australia or the government of the United Kingdom, as applicable; and
(2) Prior to the export or transfer of a qualifying defense article the Contractor—
(i) Shall mark, identify, transmit, store, and handle any defense articles provided for the purpose of responding to such solicitations, as well as any defense articles provided with or developed pursuant to their responses to such solicitations, in accordance with the DTC Treaties, the Implementing Arrangements, and corresponding regulations of the United States Government and the government of Australia or the government of the United Kingdom, as applicable, including, but not limited to, the marking and classification requirements described in the applicable regulations;
(ii) Shall comply with the re-transfer or re-export provisions of the DTC Treaties, the Implementing Arrangements, and corresponding regulations of the United States Government and the government of Australia or the government of the United Kingdom, as applicable, including, but not limited to, the re-transfer and re-export requirements described in the applicable regulations; and
(iii) Shall acknowledge that any conduct that falls outside or in violation of the DTC Treaties, Implementing Arrangements, and implementing regulations of the applicable government including, but not limited to, unauthorized re-transfer or re-export in violation of the procedures established in the applicable Implementing Arrangement and implementing regulations, remains subject to applicable licensing requirements of the government of Australia, the government of the United Kingdom, and the United States Government, including any criminal, civil, and administrative penalties or sanctions contained therein.
(f) The contractor shall include the substance of this clause, including this paragraph (f), in all subcontracts that may require exports or transfers of qualifying defense articles in connection with deliveries under the contract.
(End of clause)
252.225-7048 Export-Controlled Items.
As prescribed in 225.7901-4, use the following clause:
EXPORT CONTROLLED ITEMS (JUNE 2013)
(a) Definition. “Export-controlled items,” as used in this clause, means items subject to the Export Administration Regulations (EAR) (15 CFR Parts 730-774) or the International Traffic in Arms Regulations (ITAR) (22 CFR Parts 120-130). The term includes:
(1) “Defense items,” defined in the Arms Export Control Act, 22 U.S.C. 2778(j)(4)(A), as defense articles, defense services, and related technical data, and further defined in the ITAR, 22 CFR Part 120.
(2) “Items,” defined in the EAR as “commodities”, “software”, and “technology,” terms that are also defined in the EAR, 15 CFR 772.1.
(b) The Contractor shall comply with all applicable laws and regulations regarding export-controlled items, including, but not limited to, the requirement for contractors to register with the Department of State in accordance with the ITAR. The Contractor shall consult with the Department of State regarding any questions relating to compliance with the ITAR and shall consult with the Department of Commerce regarding any questions relating to compliance with the EAR.
(c) The Contractor's responsibility to comply with all applicable laws and regulations regarding export-controlled items exists independent of, and is not established or limited by, the information provided by this clause.
(d) Nothing in the terms of this contract adds, changes, supersedes, or waives any of the requirements of applicable Federal laws, Executive orders, and regulations, including but not limited to—
(1) The Export Administration Act of 1979, as amended (50 U.S.C. App. 2401, et seq.);
(2) The Arms Export Control Act (22 U.S.C. 2751, et seq.);
(3) The International Emergency Economic Powers Act (50 U.S.C. 1701, et seq.);
(4) The Export Administration Regulations (15 CFR Parts 730-774);
(5) The International Traffic in Arms Regulations (22 CFR Parts 120-130); and
(6) Executive Order 13222, as extended.
(e) The Contractor shall include the substance of this clause, including this paragraph (e), in all subcontracts.
(End of clause)
252.225-7049 Prohibition on Acquisition of Commercial Satellite Services from Certain Foreign Entities—Representations.
As prescribed in 225.772-5, use the following provision:
PROHIBITION ON ACQUISITION OF COMMERCIAL SATELLITE SERVICES FROM CERTAIN FOREIGN ENTITIES—REPRESENTATIONS (OCT 2015)
(a) Definitions. As used in this provision—
“Covered foreign country” means—
(i) The People’s Republic of China;
(ii) North Korea; or
(iii) Any country that is a state sponsor of terrorism. (10 U.S.C. 2279)
“Foreign entity” means—
(i) Any branch, partnership, group or sub-group, association, estate, trust, corporation or division of a corporation, or organization organized under the laws of a foreign state if either its principal place of business is outside the United States or its equity securities are primarily traded on one or more foreign exchanges.
(ii) Notwithstanding paragraph (i) of this definition, any branch, partnership, group or sub-group, association, estate, trust, corporation or division of a corporation, or organization that demonstrates that a majority of the equity interest in such entity is ultimately owned by U.S. nationals is not a foreign entity. (31 CFR 800.212)
“Government of a covered foreign country” includes the state and the government of a covered foreign country, as well as any political subdivision, agency, or instrumentality thereof.
“Satellite services” means communications capabilities that utilize an on-orbit satellite for transmitting the signal from one location to another.
“State sponsor of terrorism” means a country determined by the Secretary of State, under section 6(j)(1)(A) of the Export Administration Act of 1979 (50 U.S.C. App. 2405(j)(i)(A)), to be a country the government of which has repeatedly provided support for acts of international terrorism. As of the date of this provision, state sponsors of terrorism subject to this provision are Iran, Sudan, and Syria.
(10 U.S.C. 2327)
(b) Prohibition on award. In accordance with 10 U.S.C. 2279, unless an exception is determined to apply in accordance with DFARS 225.772-4, no contract for commercial satellite services may be awarded to—
(1) A foreign entity if the Under Secretary of Defense for Acquisition, Technology, and Logistics or the Under Secretary of Defense for Policy reasonably believes that the foreign entity—
(i) Is an entity in which the government of a covered foreign country has an ownership interest that enables the government to affect satellite operations; or
(ii) Plans to, or is expected to, provide or use launch or other satellite services under the contract from a covered foreign country; or
(2) An offeror that is offering to provide the commercial satellite services of a foreign entity as described in paragraph (b)(1) of this section.
(c) Representations. The Offeror represents that—
(1) It [ ] is, [ ] is not a foreign entity in which the government of a covered foreign country has an ownership interest that enables the government to affect satellite operations;
(2) It [ ] is, [ ] is not a foreign entity that plans to provide or use launch or other satellite services under the contract from a covered foreign country;
(3) It [ ] is, [ ] is not offering commercial satellite services provided by a foreign entity in which the government of a covered foreign country has an ownership interest that enables the government to affect satellite operations; and
(4) It [ ] is, [ ] is not offering commercial satellite services provided by a foreign entity that plans to or is expected to provide or use launch or other satellite services under the contract from a covered foreign country.
(d) Disclosure. If the Offeror has responded affirmatively to any of the above representations, provide the following information, as applicable:
(1) Identification of the foreign entity proposed to provide the commercial satellite services, if other than the Offeror.
(2) To the extent practicable, a description of any ownership interest that the government of a covered foreign country has in the foreign entity proposed to provide the satellite services, including identification of the covered foreign country.
(3) Identification of any covered foreign country in which launch or other satellite services will be provided or used, and a description of any satellite services planned to be provided or used in that country.
(e) The representations in paragraph (c) of this provision are a material representation of fact upon which reliance will be placed when making award. If it is later determined that the Offeror knowingly rendered an erroneous representation, in addition to other remedies available to the Government, the Contracting Officer may terminate the contract resulting from this solicitation for default.
(End of provision)
252.225-7050 Disclosure of Ownership or Control by the Government of a Country that is a State Sponsor of Terrorism.
As prescribed in 225.771-5, use the following provision:
DISCLOSURE OF OWNERSHIP OR CONTROL BY THE GOVERNMENT OF AB COUNTRY THAT IS A STATE SPONSOR OF TERRORISM (OCT 2015)
(a) Definitions. As used in this provision—
“Government of a country that is a state sponsor of terrorism” includes the state and the government of a country that is a state sponsor of terrorism, as well as any political subdivision, agency, or instrumentality thereof.
“Significant interest” means—
(i) Ownership of or beneficial interest in 5 percent or more of the firm’s or subsidiary’s securities. Beneficial interest includes holding 5 percent or more of any class of the firm’s securities in “nominee shares,” “street names,” or some other method of holding securities that does not disclose the beneficial owner;
(ii) Holding a management position in the firm, such as a director or officer;
(iii) Ability to control or influence the election, appointment, or tenure of directors or officers in the firm;
(iv) Ownership of 10 percent or more of the assets of a firm such as equipment, buildings, real estate, or other tangible assets of the firm; or
(v) Holding 50 percent or more of the indebtedness of a firm.
“State sponsor of terrorism” means a country determined by the Secretary of State, under section 6(j)(1)(A) of the Export Administration Act of 1979 (50 U.S.C. App. 2405(j)(1)(A)), to be a country the government of which has repeatedly provided support for acts of international terrorism. As of the date of this provision, state sponsors of terrorism include: Iran, Sudan, and Syria.
(b) Prohibition on award. In accordance with 10 U.S.C. 2327, unless a waiver is granted by the Secretary of Defense, no contract may be awarded to a firm if the government of a country that is a state sponsor of terrorism owns or controls a significant interest in—
(1) The firm;
(2) A subsidiary of the firm; or
(3) Any other firm that owns or controls the firm.
(c) Representation. Unless the Offeror submits with its offer the disclosure required in paragraph (d) of this provision, the Offeror represents, by submission of its offer, that the government of a country that is a state sponsor of terrorism does not own or control a significant interest in—
(1) The Offeror;
(2) A subsidiary of the Offeror; or
(3) Any other firm that owns or controls the Offeror.
(d) Disclosure.
(1) The Offeror shall disclose in an attachment to its offer if the government of a country that is a state sponsor of terrorism owns or controls a significant interest in the Offeror; a subsidiary of the Offeror; or any other firm that owns or controls the Offeror.
(2) The disclosure shall include—
(i) Identification of each government holding a significant interest; and
(ii) A description of the significant interest held by each government.
(End of provision)
252.226-7001 Utilization of Indian Organizations, Indian-Owned Economic Enterprises, and Native Hawaiian Small Business Concerns.
As prescribed in 226.104, use the following clause:
UTILIZATION OF INDIAN ORGANIZATIONS, INDIAN-OWNED ECONOMIC ENTERPRISES, AND NATIVE HAWAIIAN SMALL BUSINESS CONCERNS (SEP 2004)
(a) Definitions. As used in this clause--
“Indian” means—
(1) Any person who is a member of any Indian tribe, band, group, pueblo, or community that is recognized by the Federal Government as eligible for services from the Bureau of Indian Affairs (BIA) in accordance with 25 U.S.C. 1452(c); and
(2) Any “Native” as defined in the Alaska Native Claims Settlement Act (43 U.S.C. 1601 et seq.).
“Indian organization” means the governing body of any Indian tribe or entity established or recognized by the governing body of an Indian tribe for the purposes of 25 U.S.C. Chapter 17.
“Indian-owned economic enterprise” means any Indian-owned (as determined by the Secretary of the Interior) commercial, industrial, or business activity established or organized for the purpose of profit, provided that Indian ownership constitutes not less than 51 percent of the enterprise.
“Indian tribe” means any Indian tribe, band, group, pueblo, or community, including native villages and native groups (including corporations organized by Kenai, Juneau, Sitka, and Kodiak) as defined in the Alaska Native Claims Settlement Act, that is recognized by the Federal Government as eligible for services from BIA in accordance with 25 U.S.C. 1452(c).
“Interested party” means a contractor or an actual or prospective offeror whose direct economic interest would be affected by the award of a subcontract or by the failure to award a subcontract.
“Native Hawaiian small business concern” means an entity that is—
(1) A small business concern as defined in Section 3 of the Small Business Act (15 U.S.C. 632) and relevant implementing regulations; and
(2) Owned and controlled by a Native Hawaiian as defined in 25 U.S.C. 4221(9).
(b) The Contractor shall use its best efforts to give Indian organizations, Indian-owned economic enterprises, and Native Hawaiian small business concerns the maximum practicable opportunity to participate in the subcontracts it awards, to the fullest extent consistent with efficient performance of the contract.
(c) The Contracting Officer and the Contractor, acting in good faith, may rely on the representation of an Indian organization, Indian-owned economic enterprise, or Native Hawaiian small business concern as to its eligibility, unless an interested party challenges its status or the Contracting Officer has independent reason to question that status.
(d) In the event of a challenge to the representation of a subcontractor, the Contracting Officer will refer the matter to—
(1) For matters relating to Indian organizations or Indian-owned economic enterprises:
U.S. Department of the Interior
Bureau of Indian Affairs
Attn: Chief, Division of Contracting and
Grants Administration
1849 C Street NW, MS-2626-MIB
Washington, DC 20240-4000.
The BIA will determine the eligibility and will notify the Contracting Officer.
(2) For matters relating to Native Hawaiian small business concerns:
Department of Hawaiian Home Lands
PO Box 1879
Honolulu, HI 96805.
The Department of Hawaiian Home Lands will determine the eligibility and will notify the Contracting Officer.
(e) No incentive payment will be made—
(1) While a challenge is pending; or
(2) If a subcontractor is determined to be an ineligible participant.
(f)(1) The Contractor, on its own behalf or on behalf of a subcontractor at any tier, may request an incentive payment in accordance with this clause.
(2) The incentive amount that may be requested is 5 percent of the estimated cost, target cost, or fixed price included in the subcontract at the time of award to the Indian organization, Indian-owned economic enterprise, or Native Hawaiian small business concern.
(3) In the case of a subcontract for commercial items, the Contractor may receive an incentive payment only if the subcontracted items are produced or manufactured in whole or in part by an Indian organization, Indian-owned economic enterprise, or Native Hawaiian small business concern.
(4) The Contractor has the burden of proving the amount claimed and shall assert its request for an incentive payment prior to completion of contract performance.
(5) The Contracting Officer, subject to the terms and conditions of the contract and the availability of funds, will authorize an incentive payment of 5 percent of the estimated cost, target cost, or fixed price included in the subcontract awarded to the Indian organization, Indian-owned economic enterprise, or Native Hawaiian small business concern.
(6) If the Contractor requests and receives an incentive payment on behalf of a subcontractor, the Contractor is obligated to pay the subcontractor the incentive amount.
(g) The Contractor shall insert the substance of this clause, including this paragraph (g), in all subcontracts exceeding $500,000.
(End of clause)
