Macintosh Classic II
![]() |
|
Release date | October 21, 1991 (MCII) September 14, 1992 (MP200) |
---|---|
Introductory price | $1900 |
Discontinued | September 13, 1993 (MCII) October 18, 1993 (MP200) |
Operating system | System 6.0.8L, System 7.0.1-System 7.1, System 7.1.1-Mac OS 7.6.1 |
CPU | Motorola 68030 @ 16 MHz |
Memory | 2 MB, expandable to 10 MB (100 ns 30-pin SIMM) |
The Apple Macintosh Classic II (also known as the Performa 200) replaced the Macintosh SE/30 in the compact Macintosh line in 1991. Like the SE/30, the Classic II was powered by a 16 MHz Motorola 68030 CPU and 40 or 80 MB hard disk, but in contrast to its predecessor, it was limited by a 16-bit data bus (the SE/30 had a 32-bit data bus) and a 10 MB memory ceiling.
While the Classic II shares a case with the earlier Classic, architecturally it is more similar to the Macintosh LC. The use of custom ICs, identical to those used in the LC, enabled the Classic II to have a lower component count than older Macs. Unlike the LC and the SE/30 before it, the Classic II did not have an internal PDS expansion slot, making it the first slotless desktop Macintosh since the Macintosh Plus.
There were two Classic II cases. Later models came with a speaker grille on the left side for enhanced sound (as pictured).
The Classic II was the last black-and-white compact Macintosh. It was also the last desktop Macintosh to include a floppy disk port. Apple discontinued support for the Classic II on January 1, 2001.
Contents |
[edit] Full Specifications
- CPU: 16 MHz (15.6672 MHz) Motorola 68030 (32-bit wide)
- FPU: Motorola 68882 (optional)
- ROM: 512 KB
- RAM: 2 MB, expandable to 10 MB using two 100 ns 30-pin SIMMs
- Display: 9" b&w screen, 512 x 342 pixels
- Audio: 8-bit mono 22kHz
- Hard drive: 40 or 80 MB
- Floppy: 1.4 MB double sided
- Size (HxWxD): 13.2" x 9.7" x 11.2"
- Weight: 16 lb.
- Gestalt ID: 23
- Addressing: 24-bit or 32-bit
- Battery: 3.6 V lithium
- Expansion slots: none†
- Upgrade path: none
[edit] Interfaces
- ADB port for keyboard and mouse
- Two mini-DIN-8 RS-422 serial ports
- DB-25 SCSI connector
- DB-19 External floppy drive connector
- Microphone 3.5 mm minijack audio socket
- Headphone 3.5 mm minijack audio socket
†The Classic II has a 50-pin internal expansion slot intended for either an FPU co-processor or additional ROM. The socket is not designed to be used for any other purpose and is not suitable for use as a general expansion slot. Apple never produced an expansion card of any kind for this slot,[1] although at least one third-party FPU was available: the FastMath Classic II by Applied Engineering.[2] and Sonnet offered a synchronous (16MHz) and asynchronous (50MHz) 68882 FPU.
Timeline of compact Macintosh models
[edit] Gallery
Back of the Classic II | |
The interrupt (left) and reset (right) buttons protruding from the air vent on the lower left hand side of the Classic II. The interrupt button (also called the programmer's key) is used to access a debugger. | |
The Apple ADB keyboard that shipped with the Classic II. On many Macs the large button at the top near the Apple logo was used to power on the machine. However the Classic II did not support this feature. The keyboard contained two ADB connectors. One connected into the back of the Macintosh, the other was used for connecting the mouse or other peripherals. The mouse could be connected to either side for left or right-handed use. | |
The Apple desktop mouse that shipped with the Classic II. |
[edit] See also
[edit] References
[edit] External links
- Apple developer note for the Classic II (detailed hardware information)
- Macintosh Classic II technical specifications at apple.com
- Classic II (Performa 200)Information pages at Mac512.com
|
|
|