Home » Publications 2013

Publications 2013

  1. Ageh, V., H. Mohseni, and T. W. Scharf. "Lubricious zinc titanate coatings for high temperature applications." Surface and Coatings Technology 237 (2013): 241-247.
  2. Berhe, Seare A., Soumya Nag, Zachary Molinets, and W. Justin Youngblood. "Influence of Seeding and Bath Conditions in Hydrothermal Growth of Very Thin (∼ 20 nm) Single-Crystalline Rutile TiO2 Nanorod Films." ACS Applied Materials & Interfaces 5, no. 4 (2013): 1181-1185.
  3. Chonkaew, Wunpen, Narongrit Sombatsompop, and Witold Brostow. "High impact strength and low wear of epoxy modified by a combination of liquid carboxyl terminated poly (butadiene-co-acrylonitrile) rubber and organoclay." European Polymer Journal 49, no. 6 (2013): 1461-1470.
  4. Katakam, Shravana, Arun Devaraj, Mark Bowden, S. Santhanakrishnan, Casey Smith, Raju V. Ramanujan, Suntharampillai Thevuthasan, Rajarshi Banerjee, and Narendra B. Dahotre. "Laser assisted crystallization of ferromagnetic amorphous ribbons: A multimodal characterization and thermal model study." Journal of Applied Physics 114, no. 18 (2013): 184901.
  5. Polley, Craig M., Warrick R. Clarke, Jill A. Miwa, Giordano Scappucci, Justin W. Wells, David L. Jaeger, Maia R. Bischof, Richard F. Reidy, Brian P. Gorman, and Michelle Simmons. "Exploring the limits of n-type ultra-shallow junction formation." ACS Nano 7, no. 6 (2013): 5499-5505.
  6. Ageh, Victor, Ravi Rajamure, Yee H. Ho, and Thomas W. Scharf. "Nanocrystalline zinc titanate coatings for corrosion protection." Nanomaterials and Energy 3, no. 2 (2013): 47-52.
  7. Atta, Ayman M., Witold Brostow, Haley E. Hagg Lobland, Abdul‐Raheim M. Hasan, and Jose Perez. "Porous crosslinked copolymers of octadecyl acrylate with acrylic acid as sorbers for crude petroleum spills." Polymer International 62, no. 8 (2013): 1225-1235.
  8. Atta, Ayman M., Witold Brostow, Haley E. Hagg Lobland, Abdul-Raheim M. Hasan, and Jose M. Perez. "Porous polymer oil sorbents based on PET fibers with crosslinked copolymer coatings." RSC Advances 3, no. 48 (2013): 25849-25857.
  9. Atta, Ayman M., Witold Brostow, Tea Datashvili, Rasha A. El‐Ghazawy, Haley E. Hagg Lobland, Abdul‐Raheim M. Hasan, and Jose M. Perez. "Porous polyurethane foams based on recycled poly (ethylene terephthalate) for oil sorption." Polymer International 62, no. 1 (2013): 116-126.
  10. Bednarski, Piotr, Dionizy Biało, Witold Brostow, Kazimierz Czechowski, Waldemar Polowski, Piotr Rusek, And Daniel Toboła. "Improvement of Tribological Properties of Metal Matrix Composites by Means of Slide Burnishing." Materials Science 19, no. 4 (2013): 367-372.
  11. Behera, A., S. Nag, K. Mahdak, H. Mohseni, J. Tiley, and R. Banerjee. "Influence of oxygen ingress on fine scale precipitation of α-Ti during oxidation of Beta21S β-Ti alloy." Journal of Materials Science 48, no. 19 (2013): 6700-6706.
  12. Brostow, W., K. Czechowski, W. Polowski, P. Rusek, D. Tobola, and I. Wronska. "Slide diamond burnishing of tool steels with adhesive coatings and diffusion layers." Materials Research Innovations 17, no. 4 (2013): 269-277.
  13. Chonkaew, W., P. Dehkordi, K. P. Menard, W. Brostow, N. Menard, and O. Gencel. "Photo differential scanning calorimetry, UV thermal mechanical analysis and UV dynamic mechanical analysis of light cured acrylics." Materials Research Innovations 17, no. 4 (2013): 263-268.
  14. Choudhuri, Deep, Nilesh Dendge, Soumya Nag, Mark A. Gibson, and Rajarshi Banerjee. "Precipitation in Uniaxially Stressed Mg-Nd Alloys During Creep Testing." Metallurgical and Materials Transactions A 44, no. 7 (2013): 2905-2909.
  15. Choudhuri, D., S. Meher, S. Nag, N. Dendge, J. Y. Hwang, and R. Banerjee. "Evolution of a honeycomb network of precipitates in a hot-rolled commercial Mg–Y–Nd–Zr alloy." Philosophical Magazine Letters 93, no. 7 (2013): 395-404.
  16. Dagnon, Koffi L., Clark Robinson, Hua H. Chen, David C. Garrett, Lucia H. Innocentini‐Mei, and Nandika A. D'Souza. "Layer double hydroxides for enhanced poly (3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) crystallization." Journal of Applied Polymer Science 127, no. 5 (2013): 3395-3406.
  17. Dahotre, Narendra B. "Multiscale laser materials engineering: energy-efficient processing and materials performance." Nanomaterials and Energy 2, no. 2 (2013): 64-70.
  18. Dahotre, Sanket N., Hitesh D. Vora, K. Pavani, and Rajarshi Banerjee. "An integrated experimental and computational approach to laser surface nitriding of Ti–6Al–4V." Applied Surface Science 271 (2013): 141-148.
  19. Devaraj, Arun, Soumya Nag, and Rajarshi Banerjee. "Alpha phase precipitation from phase-separated beta phase in a model Ti–Mo–Al alloy studied by direct coupling of transmission electron microscopy and atom probe tomography." Scripta Materialia 69, no. 7 (2013): 513-516.
  20. Gencel, Osman, Cengiz Ozel, Fuat Koksal, Gonzalo Martinez-Barrera, Witold Brostow, and Hasan Polat. "Fuzzy Logic Model for Prediction of Properties of Fiber Reinforced Self-compacting Concrete." Materials Science 19, no. 2 (2013): 203-215.
  21. Gencel, O., W. Brostow, J. J. del Coz Diaz, G. Martínez-Barrera, and A. Beycioglu. "Effects of elevated temperatures on mechanical properties of concrete containing haematite evaluated using fuzzy logic model." Materials Research Innovations 17, no. 6 (2013): 382-391.
  22. Gencel, O., F. Köksal, and W. Brostow. "Wear minimisation in concrete with haematite." Materials Research Innovations 17, no. 2 (2013): 92-97.
  23. Hoffmann, William, and Guido Verbeck. "Toward a reusable surface-enhanced Raman spectroscopy (SERS) substrate by soft-landing ion mobility." Applied Spectroscopy 67, no. 6 (2013): 656-660.
  24. Hwang, Jun Yeon, Rajarshi Banerjee, David R. Diercks, and Michael J. Kaufman. "Direct Observation of Heterogeneous Nucleation in Al-Si-Cu-Mg Alloy Using Transmission Electron Microscopy and Three-dimensional Atom Probe Tomography." Korean Society of Microscopy 43, no. 3 (2013): 122-126.
  25. Jones, J. D., C. F. Morris, G. F. Verbeck, and J. M. Perez. "Oxidative pit formation in pristine, hydrogenated and dehydrogenated graphene." Applied Surface Science 264 (2013): 853-863.
  26. Katakam, Shravana, Nana Asiamah, Soundarapandian Santhanakrishnan, and Narendra Dahotre. "Laser in-situ synthesis of TiB 2–Al composite coating for improved wear performance." Surface and Coatings Technology 236 (2013): 200-206.
  27. Lee, Kyung-Min, and Tae-Youl Choi. "Focused Ion Beam-Assisted Nanoscale Processing and Thermoelectrical Characterization." In FIB Nanostructures, pp. 359-371. Springer International Publishing, 2013.
  28. Martínez-Barrera, Gonzalo, Enrique Vigueras-Santiago, Miguel Martínez-López, Maria CS Ribeiro, Antonio JM Ferreira, and Witold Brostow. "Luffa fibers and gamma radiation as improvement tools of polymer concrete." Construction and Building Materials 47 (2013): 86-91.
  29. Meher, S., S. Nag, J. Tiley, A. Goel, and R. Banerjee. "Coarsening kinetics of γ′ precipitates in cobalt-base alloys." Acta Materialia 61, no. 11 (2013): 4266-4276.
  30. Mukherjee, Tamal, Sirish Rimal, Simon Koskey, Oliver Chyan, Kanwal Jit Singh, and Alan M. Myers. "Bonding Structure of Model Fluorocarbon Polymer Residue Determined by Functional Group Specific Chemical Derivatization." ECS Solid State Letters 2, no. 3 (2013): N11-N14.
  31. Nag, S., A. Devaraj, N. Gupta, R. Williams, S. Srivilliputhur, H. L. Fraser, and R. Banerjee. "Coupling Atom Probe Tomography with Aberration-Corrected Scanning Transmission Electron Microscopy and First-Principles Computations to Investigate Omega Precipitation in Titanium Alloys." Microscopy and Microanalysis 19, no. S2 (2013): 946-947.
  32. Nag, Soumya, Sameer R. Paital, Peeyush Nandawana, Kristopher Mahdak, Yee Hsien Ho, Hitesh D. Vora, Rajarshi Banerjee, and Narendra B. Dahotre. "Laser deposited biocompatible Ca–P coatings on Ti–6Al–4V: Microstructural evolution and thermal modeling." Materials Science and Engineering: C 33, no. 1 (2013): 165-173.
  33. Rojhirunsakool, T., S. Meher, J. Y. Hwang, S. Nag, J. Tiley, and R. Banerjee. "Influence of composition on monomodal versus multimodal γ′ precipitation in Ni–Al–Cr alloys." Journal of Materials Science 48, no. 2 (2013): 825-831.
  34. Santos-Ortiz, Reinaldo, Vyacheslav Volkov, Stefan Schmid, Fang-Ling Kuo, Kim Kisslinger, Soumya Nag, Rajarshi Banerjee, Yimei Zhu, and Nigel D. Shepherd. "Microstructure and electronic band structure of pulsed laser deposited iron fluoride thin film for battery electrodes." ACS Applied Materials & Interfaces 5, no. 7 (2013): 2387-2391.
  35. Singh, Ashish, Shravana Katakam, Jan Ilavsky, Narendra B. Dahotre, and Sandip P. Harimkar. "Nanocrystallization in spark plasma sintered Fe48Cr15Mo14Y2C15B6 bulk amorphous alloy." Journal of Applied Physics 114, no. 5 (2013): 054903.
  36. Singh, A. R. P., S. Nag, S. Chattopadhyay, Y. Ren, J. Tiley, G. B. Viswanathan, H. L. Fraser, and R. Banerjee. "Mechanisms related to different generations of γ′ precipitation during continuous cooling of a nickel base superalloy." Acta Materialia 61, no. 1 (2013): 280-293.
  37. Tiley, Jaimie S., O. Senkov, G. Viswanathan, S. Nag, J. Hwang, and R. Banerjee. "A Methodology for Determination of γ′ Site Occupancies in Nickel Superalloys Using Atom Probe Tomography and X-ray Diffraction." Metallurgical and Materials Transactions A 44, no. 1 (2013): 31-38.
  38. Uygunoğlu, Tayfun, Witold Brostow, Osman Gencel, and İlker Bekir Topçu. "Bond strength of polymer lightweight aggregate concrete." Polymer Composites 34, no. 12 (2013): 2125-2132.
  39. Vora, Hitesh D., Ravi Shanker Rajamure, Santhanakrishnan Soundarapandian, S. G. Srinivasan, and Narendra B. Dahotre. "Design and optimization of microstructure for improved corrosion resistance in laser surface alloyed aluminum with molybdenum." International Journal of Precision Engineering and Manufacturing 14, no. 8 (2013): 1421-1432.
  40. Vora, Hitesh D., Ravi Shanker Rajamure, Santhanakrishnan Soundarapandian, S. G. Srinivasan, and Narendra B. Dahotre. "Dilution of molybdenum on aluminum during laser surface alloying." Journal of Alloys and Compounds 570 (2013): 133-143.
  41. Wang, Qi, Iain WH Oswald, Michael R. Perez, Huiping Jia, Bruce E. Gnade, and Mohammad A. Omary. "Exciton and Polaron Quenching in Doping‐Free Phosphorescent Organic Light‐Emitting Diodes from a Pt (II)‐Based Fast Phosphor." Advanced Functional Materials 23, no. 43 (2013): 5420-5428.