![]() |
MSHA's Accident Prevention Program Miner's Tip Pre-operational and Workplace Inspections |
![]() |
---|
Mine Type: All Surface |
Category: General Safety |
Miners have been injured or killed when conditions were overlooked during these inspections.
Recommendations for pre-operational and workplace inspections:
- Carry a checklist while conducting inspections.
- "Danger off" any hazardous area or tag defective equipment immediately. Make a record of the readings and hazards.
- Seek assistance when inspecting areas or equipment with which you are unfamiliar.
- Walk slowly through the area and around equipment inspecting for hazards above, below and adjacent to the workplace.
- Take all necessary tools, warning signs and detection equipment with you during the inspection. Check and calibrate detectors prior to use.
- Notify the proper people so that the hazards or defects can be corrected as soon as possible.
Issued: | 03/19/2003 |
---|---|
Tag # | AP2002-M085 |
MSHA extends a thank you and a tip of the hardhat to
Mr. John Englerth a winner of a limited edition sticker and patch. If you have a tip you would like to pass on, you can e-mail it to zzMSHA-MinersTips@dol.gov. If your tip is selected, you will receive credit in this space. |