Overview
Federal Regulations
All
Driver
Vehicle
Company
FMCSA Hazmat
Regulatory Guidance
Rulemakings and Notices
Final Rules
Interim Final Rules
Proposed Rules
Notices
Topics of Interest
Hours-of-Service (HOS) Summary
Distracted Driving
Hazardous Materials
Intermodal Equipment Providers (IEP)
New Entrant Safety Assurance
Medical Program
Medical Expert Panels
NAFTA Rules
Drug & Alcohol Testing
 
  
 

What are the minimum performance criteria for cargo securement devices and systems?

Regulations current to Aug 30, 2012
         
Examples: Medical Form, 391.53, 391
 
Up All Regulations
Up Part 393
 
< 393.100 393.104 >
Subpart I - Protection against shifting and falling cargo

Code of Federal Regulations§ 393.102What are the minimum performance criteria for cargo securement devices and systems?[Interpretation] (a) Performance criteria—(1) Breaking strength. Tiedown assemblies (including chains, wire rope, steel strapping, synthetic webbing, and cordage) and other attachment or fastening devices used to secure articles of cargo to, or in, commercial motor vehicles must be designed, installed, and maintained to ensure that the maximum forces acting on the devices or systems do not exceed the manufacturer's breaking strength rating under the following conditions, applied separately: (i) 0.8 g deceleration in the forward direction;(ii) 0.5 g acceleration in the rearward direction; and(iii) 0.5 g acceleration in a lateral direction. (2) Working Llad limit. Tiedown assemblies (including chains, wire rope, steel strapping, synthetic webbing, and cordage) and other attachment or fastening devices used to secure articles of cargo to, or in, commercial motor vehicles must be designed, installed, and maintained to ensure that the forces acting on the devices or systems do not exceed the working load limit for the devices under the following conditions, applied separately: (i) 0.435 g deceleration in the forward direction;(ii) 0.5 g acceleration in the rearward direction; and(iii) 0.25 g acceleration in a lateral direction. (b) Performance criteria for devices to prevent vertical movement of loads that are not contained within the structure of the vehicle. Securement systems must provide a downward force equivalent to at least 20 percent of the weight of the article of cargo if the article is not fully contained within the structure of the vehicle. If the article is fully contained within the structure of the vehicle, it may be secured in accordance with Sec. 393.106(b). (c) Equivalent means of securement. The means of securing articles of cargo are considered to meet the performance requirements of this section if the cargo is “ (1) Immobilized, such so that it cannot shift or tip to the extent that the vehicle's stability or maneuverability is adversely affected; or(2) Transported in a sided vehicle that has walls of adequate strength, such that each article of cargo within the vehicle is in contact with, or sufficiently close to a wall or other articles, so that it cannot shift or tip to the extent that the vehicle's stability or maneuverability is adversely affected; or(3) Secured in accordance with the applicable requirements of §§393.104 through 393.136.[71 FR 35832, June 22, 2006]

 
 
Connect with us
FMCSA's Contact Us  FMCSA's Facebook page

Feedback | Privacy Policy | USA.gov | Freedom of Information Act (FOIA) | Accessibility | OIG Hotline | Web Policies and Important Links | Site Map | Plug-ins

Federal Motor Carrier Safety Administration
1200 New Jersey Avenue SE, Washington, DC 20590 • 1-800-832-5660 • TTY: 1-800-877-8339 • Field Office Contacts