Technical Excellence Poster Winners
AEDC Engineer Henry Horne (right) receives a third place Technical Excellence Poster Session award from presenter Col. Raymond Toth, AEDC commander. (Photo by Jacqueline Cowan)
|
Technical ...
Download Full Image E-mail a friend
Posted: 12/14/2012
|
|
|
Technical Excellence Poster Winners
AEDC Engineer Jesse Labello (left) receives a second place Technical Excellence Poster Session award from presenter Col. Raymond Toth, AEDC commander. (Photo by Jacqueline Cowan)
|
Technical ...
Download Full Image E-mail a friend
Posted: 12/14/2012
|
|
|
Technical Excellence Poster Winners
Eric Marineau (left), an AEDC Hypervelocity Tunnel 9 engineer, receives a first place Technical Excellence Poster Session award from presenter Dan Marren, AEDC Hypervelocity Tunnel 9 director. (Photo by Arnold Collier)
|
Technical ...
Download Full Image E-mail a friend
Posted: 12/14/2012
|
|
|
AEDC's Precision Measurement Equipment Laboratory: 60-years plus of unrivaled mission support into the future and beyond
Master Sgt. Lars Mirandamuller, AEDC PMEL/Chemical Laboratories section chief, and Dave Compton, Aerospace Testing Alliance (ATA) PMEL manager, examine a high voltage divider during a recent inspection held annually at one of the most unique calibration labs in the world. (Photo by Jacqueline Cowan)
|
AEDC's ...
Download Full Image E-mail a friend
Posted: 11/30/2012
|
|
|
AEDC's Precision Measurement Equipment Laboratory: 60-years plus of unrivaled mission support into the future and beyond
AEDC PMEL Instrument Technician Barry Benson adjusts a capacitance diaphragm gauge using an automated vacuum gauge calibration system. (Photo by Rick Goodfriend)
|
AEDC's ...
Download Full Image E-mail a friend
Posted: 11/30/2012
|
|
|
AEDC's Precision Measurement Equipment Laboratory: 60-years plus of unrivaled mission support into the future and beyond
AEDC PMEL Instrument Technician Danny Myers calibrates a pressure controller using a primary pressure standard. (Photo by Rick Goodfriend)
|
AEDC's ...
Download Full Image E-mail a friend
Posted: 11/30/2012
|
|
|
Test at AEDC helping determine feasibility of high energy lasers for the warfighter
The gap between the AEDC Aerodynamic and Propulsion Test Unit’s nozzle and diffuser was widened to 54 inches in order to increase flexibility during Air Force Research Laboratory testing and allow more of the test article. Before making the modification, AEDC engineers used Computational Fluid Dynamics to ensure the work would not affect the test. The modification was one of several made to accommodate AFRL for its testing. (Photo provided)
|
Test at AEDC ...
Download Full Image E-mail a friend
Posted: 9/13/2012
|
|
|
Test at AEDC helping determine feasibility of high energy lasers for the warfighter
Before modification for the Air Force Research Laboratory’s testing involving laser effects on materials, the gap between the AEDC Aerodynamic and Propulsion Test Unit’s diffuser and nozzle was 17 inches.
|
Test at AEDC ...
Download Full Image E-mail a friend
Posted: 9/13/2012
|
|
|
AEDC's Model Shop's workforce, technological assets remain critical to ground testing
Tim Taylor and “Chief Craftsman” Rodger Ford, ATA boilermakers, operate the 500-ton press brake to straighten the vertical housing front cover for the 4T CTS, before the part is heat treated.
|
AEDC's Model ...
Download Full Image E-mail a friend
Posted: 6/6/2012
|
|
|
AEDC's Model Shop's workforce, technological assets remain critical to ground testing
Russell Arbuckle, an ATA inside machinist, operates the computer numerical control (CNC) gantry mill on one of AEDC’s Hypervelocity Ballistic Range G’s gun barrels.
|
AEDC's Model ...
Download Full Image E-mail a friend
Posted: 6/6/2012
|
|
|
AEDC's Model Shop's workforce, technological assets remain critical to ground testing
Derrick Burton, an ATA inside machinist, operates the Baeyr CNC mill on the Top Tube Reducer for the 4T CTS Pitch and Yaw Assembly.
|
AEDC's Model ...
Download Full Image E-mail a friend
Posted: 6/6/2012
|
|
|
AEDC-led collaborative effort results in safer, 'green' alternative fluid for turbine flow measurement calibrators
From left to right: Jeremy Latsko, U.S. Air Force Metrology and Calibration; Russell Kauffman, U.S. Army Primary Standards Laboratory; Wes England, U.S. Army Primary Standards Laboratory; Michael Vickers, U.S. Army Primary Standards Laboratory; Judy Burden, U.S. Army PD TMDE; John Ball, UAH and U.S. Army PD TMDE; James Winchester, Aerospace Testing Alliance, Inc., and Joel Davenport, University of Tennessee Space Institute, pose for a group photo during a joint services group meeting adjacent to the turbine flow meter calibrator loaned to AEDC by Vandenberg AFB, Calif., (official designation is PCLCE-350) July 7, 2009. (Photo provided)
|
AEDC-led ...
Download Full Image E-mail a friend
Posted: 2/22/2012
|
|
|
| | | |