By Marc Rayman

NASA’s Dawn spacecraft is less than five months away from getting into orbit around its first target, the giant asteroid Vesta. Each month, Marc Rayman, Dawn’s chief engineer, shares an update on the mission’s progress.

Artist’s concept of NASA’s Dawn spacecraft at the large asteroid Vesta. The mission is less than five months away from getting into orbit around the large asteroid, its first target.

Dear Pleasant Dawnversions,

Deep in the asteroid belt, Dawn continues thrusting with its ion propulsion system. The spacecraft is making excellent progress in reshaping its orbit around the sun to match that of its destination, the unexplored world Vesta, with arrival now less than five months away.

We have considered before the extraordinary differences between Dawn’s method of entering orbit and that of planetary missions employing conventional propulsion. This explorer will creep up on Vesta, gradually spiraling closer and closer. Because the probe and its target already are following such similar routes around the sun, Dawn is now approaching Vesta relatively slowly compared to most solar system velocities. The benefit of the more than two years of gentle ion thrusting the spacecraft has completed so far is that now it is closing in at only 0.7 kilometers per second (1600 mph). Each day of powered flight causes that speed to decrease by about 7 meters per second (16 mph) as their orbital paths become still more similar. Of course, both are hurtling around the sun much faster, traveling at more than 21 kilometers per second (47,000 mph), but for Dawn to achieve orbit around Vesta, what matters is their relative velocity.

It may be tempting to think of that difference from other missions as somehow being a result of the destination being different, but that is not the case. The spiral course Dawn will take is a direct consequence of its method of propelling itself. If this spacecraft were entering orbit around any other planetary body, it would follow the same type of flight plan. This unfamiliar kind of trajectory ensues from the long periods of thrusting (enabled by the uniquely high fuel efficiency of the ion propulsion system) with an extremely gentle force.

Designing the spiral trajectories is a complex and sophisticated process. It is not sufficient simply to turn the thrust on and expect to arrive at the desired destination, any more than it is sufficient to press the accelerator pedal on your car and expect to reach your goal. You have to steer carefully (and if you don’t, please don’t drive near me), and so does Dawn. As the ship revolves around Vesta in the giant asteroid’s gravitational grip, it has to change the pointing of the xenon beam constantly to stay on precisely the desired winding route to the intended science orbits.

Dawn will scrutinize Vesta from three different orbits, known somewhat inconveniently as survey orbit, high altitude mapping orbit (HAMO), and low altitude mapping orbit (LAMO). Upon concluding its measurements in each phase, it will resume operating its ion propulsion system, using the mission control team’s instructions for pointing its thruster to fly along the planned spiral to the next orbit.

› Continue reading Dawn Spacecraft Creeping Up on Vesta

By Amy Mainzer

Over the course of the nine months we’ve been operating WISE, we’ve observed over 150,000 asteroids and comets of all different types. We had to pick all of these moving objects out of the hundreds of millions of sources observed all over the sky — so you can imagine that sifting through all those stars and galaxies to find the asteroids is not easy!

We use a lot of techniques to figure out how to distinguish an asteroid from a star or galaxy. Even though just about everything in the universe moves, asteroids are a whole lot closer to us than your average star (and certainly your average galaxy), so they appear to move from place to place in the WISE images over a timescale of minutes, unlike the much more distant stars. It’s almost like watching a pack of cyclists go by in the Tour de France. Also, WISE takes infrared images, which means that cooler objects like asteroids look different than the hotter stars. If you look at the picture below, you can see that the stars appear bright blue, whereas the sole asteroid in the frame appears red. That’s because the asteroid is about room temperature and is therefore much colder than the stars, which are thousands of degrees. Cooler objects will give off more of their light at longer, infrared wavelengths that our WISE telescope sees. We can use both of these unique properties of asteroids — their motion and their bright infrared signatures — to tease them out of the bazillions of stars and galaxies in the WISE images.

The first near-Earth asteroid discovered by WISE (red dot) stands out from the stars (blue dots). The asteroid is much cooler than the stars, so it emits more of its light at the longer, infrared wavelengths WISE uses. This makes it appear redder than the stars. Image credit: NASA/JPL-Caltech/UCLA |   › Full image and caption

 
Thanks to the efforts of some smart scientists and software engineers, we have a very slick program that automatically searches the images for anything that moves at the longer, infrared wavelengths. With WISE, we take about a dozen or so images of each part of the sky over a couple of days. The system works by throwing out everything that appears again and again in each exposure. What’s left are just the so-called transient sources, the things that don’t stay the same between snapshots. Most of these are cosmic rays — charged particles zooming through space that are either spat out by our sun or burped up from other high-energy processes like supernovae or stars falling into black holes. These cosmic rays hit our detectors, leaving a blip that appears for just a single exposure. Also, really bright objects can leave an after-image on the detectors that can persist for many minutes, just like when you stare at a light bulb and then close your eyes. We have to weed the real asteroid detections out from the cosmic rays and after-images.

The data pipeline is smart enough to catch most of these artifacts and figure out what the real moving objects are. However, if it’s a new asteroid that no one has ever seen before, we have to have a human inspect the set of images and make sure that it’s not just a collection of artifacts that happened to show up at the right place and right time. About 20 percent of the asteroids that we observe appear to be new, and we examine those using a program that we call our quality assurance (QA) system, which lets us rapidly sift through hundreds of candidate asteroids to make sure they’re real. The QA system pops up a set of images of the candidate asteroid, along with a bunch of “before” and “after” images of the same part of the sky. This lets us eliminate any stars that might have been confused for the asteroids. Finally, since the WISE camera takes a picture every 11 seconds, we take a look at the exposures taken immediately before the ones with the candidate asteroid — if the source is really just an after-image persisting after we’ve looked at something bright, it will be there in the previous frame. We’ve had many students — three college students and two very talented high school students — work on asteroid QA. They’ve become real pros at inspecting asteroid candidates!

This is a screenshot from the WISE moving-object quality assurance system, which helps weed out false asteroid candidates. The top two rows show an asteroid candidate detected in 16 different WISE snapshots, at two different infrared wavelengths. The lower rows show the same patch of sky at different times — they let the astronomers make sure that stars or galaxies haven’t been confused for the asteroid. Image credit: NASA/JPL-Caltech/UCLA

 
Meanwhile, the hunt continues — we’re still trekking along through the sky with the two shortest-wavelength infrared bands, now that we’ve run out of the super-cold hydrogen that was keeping two of the four detectors operating. Even though our sensitivity is lower, we’re still observing asteroids and looking for interesting things like nearby brown dwarfs (stars too cold to shine in visible light because they can’t sustain nuclear fusion). Our dedicated team of asteroid inspectors keeps plugging away, keeping the quality of the detections very high so that we leave the best possible legacy when our little telescope’s journey is finally done.