Standard Specifications (FP)
![FP-03 US Customary Units](fp-03/usc.png)
The Standard Specifications for the Construction of Roads and Bridges on Federal Highway Projects (FP) are issued primarily for constructing roads and bridges on Federal Highway projects under the direct administration of the Federal Highway Administration. The FP is available in both US Customary and Metric units.
While the FLH Divisions strongly encourages the use of the downloadable versions of this manual, FLH customers may obtain paper copies of the FP by contacting the nearest FLH Division Office. USFS contractors and consultants should contact their nearest Regional office for paper copies of the FP.
View the FP-03, US Customary Units (Acrobat, 2.78 MB)
View the FP-03, Metric Units (Acrobat, 2.65 MB)
MSWord Files by Section
Description | US Customary | Metric |
---|---|---|
Introduction and Table of Contents | ![]() |
![]() |
Division 100 General Requirements | ![]() |
![]() |
Division 150 Project Requirements | ![]() |
![]() |
Division 200 Earthwork | ![]() |
![]() |
Division 250 Slope Reinforcement and Retaining Walls | ![]() |
![]() |
Division 300 Aggregate Courses | ![]() |
![]() |
Division 400 Asphalt Pavements and Surface Treatments | ![]() |
![]() |
Division 500 Rigid Pavements | ![]() |
![]() |
Division 550 Bridge Construction | ![]() |
![]() |
Division 600 Incidental Construction | ![]() |
![]() |
Division 700 Material | ![]() |
![]() |
Entire FP | ![]() ![]() |
![]() ![]() |