MSHA's Accident Prevention Program Miner's Tip Bulk Truck Maintenance |
---|
Mine Type: All Surface |
Category: Blasting |
The smoke was actually the result of a buildup of a sensitized explosive blend that had become heated within the auger assembly. The truck had been previously used to blend ANFO with an emulsion product. Improper cleaning of the auger assembly allowed the blend to build up within the auger, causing constriction within the assembly. The friction, caused from the rotating action of the auger, created heat causing the explosive to steam and/or smoke.
A weekly examination and cleaning of the auger assembly on bulk trucks allows for easier transport of the explosive throughout the auger assembly. The easier material is transported throughout the auger, the less heat and pressure that is produced. In addition, a clean auger allows for a complete blending of the ANFO and emulsion components, improving detonation characteristics.
This procedure takes very little time.
Anyone familiar with explosives knows that they can detonate from excessive heat and pressure. At the times explosives are safe and stable, precautions need to be taken to protect this product from extraneous sources of heat and pressure.
Reissued: | 04/30/2002 |
---|---|
Tag # | AP2002-M014 |
MSHA extends a thank you and a tip of the hardhat to
Mr. Gurney Presley of Leavenworth, IN, a winner of a limited edition sticker and patch. If you have a tip you would like to pass on, you can e-mail it to zzMSHA-MinersTips@dol.gov. If your tip is selected, you will receive credit in this space. |