Source Type
Bending magnet
Optical System
A two-mirror system (M1 and M2) collects and re-images the synchrotron infrared source at a point just outside of the storage ring's UHV. M1 is a water-cooled plane mirror made from silicon with a gold reflective coating. M2 is a glass ellipsoid with an aluminum reflective coating. The ellipsoidal mirror focuses the beam through an 11mm aperture wedged diamond window (~350 microns thick). Delivered spectral range extends from approximately 10 cm-1 to beyond 40,000 cm-1. The infrared is then collimated to a diameter of 14 mm or 8 mm and transported under rough vacuum through a KBr (or polyethylene) window and into the nitrogen-purged, Nicolet endstation.
Experimental Apparatus
Nicolet Magna 860 Step-Scan FTIR equipped with CaF2, KBr, and Si beamsplitters and an internal DTGS-KBr detector.
Spectra Tech Continuum IR microscope equipped with 32x transmission/reflection, ATR, and grazing angle IR objectives. "View-thru" capability allow simultaneous sample viewing and IR data collection. Two glass objectives (4X and 20X plan) for visual inspection. DIC and fluorescence microscopy capabilities. IR and visible polarizers.
Automated X-Y scanning stage for spectroscopic mapping. Includes video image capture of sample specimen. Step resolution of 1 micron.
Small area MCT-A, MCT-B detectors
Computer System Hardware & Software
Intel Pentium VI, 2.0 GHz computer running Windows XP; 1.0 GB RAM, 80 GB hard disk, 17" flat panel monitor; Software includes Nicolet Omnic 7.0. and Atlus mapping. HP LaserJet 1100 (B&W) printer for hardcopy output. Software for converting data into simple (ascii) X,Y data format. Data can be stored via USB jump drive.