Winging it
Tech. Sgt. Chad Marx, an aircraft structural maintenance craftsman assigned to the 931st Maintenance Squadron, 931st Air Refueling Group, McConnell Air Force Base, Kan., tightens a wingnut draw cleco in order to clamp together the sheet metal frame for an aircraft galley, June 26, 2012. The draw cleco will temporarily hold the frame together until the pieces are permanently fastened with rivets. (U.S. Air Force photo by 1st Lt. Zach Anderson)
|
Winging it
Download Full Image E-mail a friend
Posted: 6/26/2012
|
|
|
Reserve speed
Master Sgt. John Fitzpatrick, an aircraft structural maintenance technician from the 931st Maintenance Squadron, speeds past the finish line at more than 170 miles per hour at Thunder Valley Raceway in Noble, Oklah., April 28. Fitzpatrick took first place in the Professional Motorcycle Racing Association's Pro E.T., recording a running time of 9.057 seconds and a reaction time of .014 seconds in the 9.02 dial. The Air Reserve Technician is one of a handful of Air Force Reservists sponsored by the Air Force Reserve Recruiting Service. He has represented the Air Force Reserve at motorcycle races throughout the Midwestern and Southeastern United States. (Courtesy photo)
|
Reserve speed
Download Full Image E-mail a friend
Posted: 4/30/2012
|
|
|
Maj Gen. Kyle visit
Tech. Sgt. Micah Ramthun, 22nd Maintenance Squadron, shows Maj. Gen. Mark A. Kyle, Commander, 4th Air Force, a main landing gear assembly the unit uses for training. (Air Force photo by Staff Sgt. Carrie Peasinger)
|
Maj Gen. Kyle ...
Download Full Image E-mail a friend
Posted: 4/14/2012
|
|
|
Electric and Environmental
Tech. Sgt. Nick Klenke, electrical and environmental craftsman, 931st Maintenance Squadron inspects the wiring on the engine fire suppression system of a KC-135 Stratotanker during a phase inspection. (Air Force photo by Staff Sgt. Carrie Peasinger)
|
Electric and ...
Download Full Image E-mail a friend
Posted: 4/24/2012
|
|
|
Stop the bleeding
Senior Airman Adam Michel and Airman 1st Class Roland Cox, fuel system repair specialists from the 22nd Maintenance Squadron, remove a ram air scoop from a KC-135 Stratotanker wing in preparation for a wing tip-to-wing tip fuel leak inspection and repair. (Air Force photo by Brannen Parrish)
|
Stop the ...
Download Full Image E-mail a friend
Posted: 4/9/2012
|
|
|
Aircraft structures section operate on metal
Staff Sgt. Andrew Tiehes, an aircraft structural maintainer with the 22nd MXS, uses a box-and-pan brake to bend a piece of sheet metal for a KC-135 Stratotanker. (Air Force photo by Brannen Parrish).
|
Aircraft ...
Download Full Image E-mail a friend
Posted: 3/26/2012
|
|
|
Aircraft structures section operate on metal
Staff Sgt. Andrew Tiehes, an aircraft structural maintainer with the 22nd MXS, uses a box-and-pan brake to bend a piece of sheet metal for a KC-135 Stratotanker part. (Air Force photo by Brannen Parrish).
|
Aircraft ...
Download Full Image E-mail a friend
Posted: 3/26/2012
|
|
|
Aircraft structures section operate on metal
Tech. Sgt. Chad Marx, an aircraft structural maintainer with the 931st MXS, clamps a portion of sheet metal to a foot shear to build a galley for a KC-135 Stratotanker. (Air Force photo by Brannen Parrish)
|
Aircraft ...
Download Full Image E-mail a friend
Posted: 3/26/2012
|
|
|
Make it spark and sizzle
Staff Sgt. Chase Splichal, a metals technologist from the 22nd Maintenance Squadron, welds a part. The integrated Metals Technology section of the 931st MXS and 22nd MXS includes 19 active and Reserve Airmen who provide round-the-clock support to the maintainers at McConnell Air Force Base. (Air Force photo by Brannen Parrish)
|
Make it spark ...
Download Full Image E-mail a friend
Posted: 3/21/2012
|
|
|
So shiny I can see myself
Tech. Sgt. Chad Marx, aircraft structural maintainer, 931st Maintenance Squadron, measures a sheet of metal prior to cutting. Marx is fabricating a galley for a KC-135 Stratotanker. The 931st MXS works with the 22nd MXS to repair a wide array of aircraft parts and equipment. The Total Force Initiative unit is comprised of 43 active duty Airmen from the 22nd Air Refueling Wing, and two Air Reserve Technicians and four traditional Reservists from the 931st Air Refueling Group. (Air Force Photo by Tech. Sgt. Brannen Parrish)
|
So shiny I can ...
Download Full Image E-mail a friend
Posted: 3/16/2012
|
|
|
Machining with a machine
Staff Sgt. Charles King, metals technologist, 931st Maintenance Squadron, uses a remote to move the table of a computer numerical control, after machining a corner brace for an aircraft galley. The Metals Technology section is comprised of a Total Force Iniative staff of 16 active duty airmen from the 22nd Maintenance Squadron, one Air Reserve Technician and two Reservists from the 931st Maintenance Squadron. The CNC can be programmed to machine parts or equipment. (Air Force photo by Tech. Sgt. Brannen Parrish)
|
Machining with ...
Download Full Image E-mail a friend
Posted: 3/13/2012
|
|
|
NDI
Staff Sgt. Amanda Mitchell, 931st Maintenance Squadron, uses an eddy current probe to search for surface and near-surface cracks on the bulkhead of a KC-135 Stratotanker. (Air Force photo by Tech. Sgt. Brannen Parrish)
|
NDI
Download Full Image E-mail a friend
Posted: 3/9/2012
|
|
|
| | | |