Globus Online for GM/CA @ APS Users
Globus Online is a free service sponsored by DOE, NIH, NSF, Argonne, and
the University of Chicago (see the
list of sponsors).
It addresses the challenges faced by researchers in moving, sharing, and archiving
large volumes of data among distributed sites. With Globus Online, you hand-off
data movement tasks to a hosted service that manages the entire operation,
monitoring performance and errors, retrying failed transfers, correcting
problems automatically whenever possible, and reporting status to keep you
informed so that you can focus on your research. Our tests show that Globus
Online is 2x faster than scp and rsync. This make a big difference reducing
data transfer times from e.g. 6 hours to 3 hours. Also, the transfer progress
can be started and watched from any place with Internet connection, e.g. from ANL
Guest House, airport, or home.
Transferring Data Between GM/CA @ APS and Your Machine
- Register
for a Globus Online account (one time for life).
- Sign in
to Globus Online using your Globus Online username and password:
![](globus_login.png)
- If you already have globusconnect application
installed on the computer that will be receiving data, then skip to
Step-4.
Otherwise install globusconnect on that computer
and obtain a unique computer ID from Globus Online by clicking on the
Globus Connect link:
![](globus_connect.png)
Clicking on the link pops up the following dialog screen:
![](globus_setup.png)
- Download a one-click Globus Connect Setup for the operating system
of the data receiving computer. The application is available for
Mac,
Linux, and
Windows.
Note the place where you saved the installer (e.g. on the Desktop
or in the "Downloads" folder).
- Give a name and optional description for the data receiving computer
and then generate the computer ID by clicking on the
"Generate Setup key" button.
- Install Globus Connect by running the downloaded Setup application.
When Setup asks you for a setup key, copy and paste the key from
the above web dialog.
- Start the globusconnect
application on the data receiving computer. For example, on Linux starting
globusconnect is as simple as typing
"./globusconnect" in respective directory:
![](globus_userclient_start.png)
On Windows the application can be started via Start -> Programs ->
Globus Connect menu. Normally no administrative privileges are required.
NOTE: The globusconnect client should be
started each time you want to transfer files to or from your data receiving
computer. This application makes the computer visible among available endpoints
on Globus Online web page. The client has a GUI interface, which looks like
this:
![](globus_userclient.png)
If for whatever reason you cannot run "globusconnect" as a GUI
(for example, you are transferring data to your home institution and accessing
a computer there remotely), then you can start it in command-line mode -- see
these
instructions.
- On the Globus Connect web page select "Start Transfer" under
"File Transfer", or from the drop down menu in the top bar:
![](globus_starttransfer.png)
- In the "Start Transfer" page, you can view the list of
available endpoints by clicking the button on the "Endpoint"
drop down box. You need to select
endpoints
for both left and right panes.
- For the left pane choose the endpoint
of data receiving computer. It is usually located at the top of the list and identified
as "
<your-username>#<your-globus-connect-name> ".
If you do not see the endpoint, then either globusconnect
is not started on the computer or it is blocked by a firewall. As soon as you
select the endpoint, you will see a list of folders on the data receiving computer.
- One the right pane choose one of the GM/CA @ APS endpoints. You can use the
GM/CA @ APS endpoint
gmca23idd#gridftp for the 23-IDD beamline, or
GM/CA @ APS endpoint
gmca23idb#gridftp for the 23-IDB beamline.
- You can type letters into the box (e.g. 'gm') to filter endpoints.
- Once you select the GM/CA endpoint, a login window will pop up:
![](globus_endpoint_gmca.png)
You can access the GM/CA endpoints on Globus Online by simply using your
username and password with respective GM/CA beamline. Keep in mind that
your account with GM/CA @ APS is typically disabled a few days after the end of
your beamtime; contact your host if unsure. Enter your GM/CA beamline
username in the "Username" field and GM/CA beamline password
(not the SSH passphrase) in the "Passphrase" field and click
"Authenticate". You can ignore the other fields.
- You will see a listing of the contents of your home directory on
respective GM/CA beamline. Double click on a directory to view its
content.
- Select a file or directory and click on the highlighted "arrow button"
to initiate the transfer:
![](globus_ini_transfer.png)
- To watch the file transfer progress or possibly cancel a transfer, choose
"View Transfers" from the drop down menu in the top bar of the
Globus Online web page. The screen will look like this:
![](globus_transfer_progress.png)
NOTE: In the present form Globus Online offers directories synchronization
option in the "Transfer Files" drop down box, but no continuous synchronization.
Although the lack of continuous synchronization is some inconvenience, it is
outweighed by the speed, which has been tested to be at least 2x faster than
traditional scp or rsync (rsync deploy scp for the transfers). We recommend to
use Globus Online for transferring large amounts of data and possibly scp/rsync
for post-transfer synchronizations.
|
|