Israel |
ISR/640 |
Electric planers (HS 8433.11, 8433.19, 8461.20, 8464.20, 8467.20, 8479.10 and 8479.81)
Israel
Electric planers (HS 8433.11, 8433.19, 8461.20, 8464.20, 8467.20, 8479.10 and 8479.81)
Revision of the Mandatory Standard SI 60745 part 2.14. This draft standard revision adopts the International Standard IEC 60745-2-14 - Edition 2.2: 2010-09.
The major differences between the old version and this new revised draft standard are as follows:
- Adds a new paragraph 19.111 dealing with the lift-off mechanical hazard;
- Adds to the normative Annex K dealing with battery tools and battery packs a new paragraph K8.12.1.1 dealing with safety warnings. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/635 |
Lighting chains (HS 8512, 8513, 8539 and 9405.10)
Israel
Lighting chains (HS 8512, 8513, 8539 and 9405.10)
Revision of the Mandatory Standard SI 20 part 2.20. This draft standard revision adopts the International Standard IEC 60598-2-20 - Edition 3.0: 2010-02.
The major differences between the old version and this new revised draft standard are as follows:
- Changes paragraph 20.7 dealing with construction: Adds to paragraph 20.7.7 also 250V voltage of E10 lampholders with parallel connection, removes the list for maximum output and rephrases paragraph 20.7.15;
- Changes the table of lighting chain characteristics appearing in paragraph 20.11 dealing with external and internal wiring. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/637 |
Low-voltage fuses (HS 8536.10, 8536.30 and 8538.90)
Israel
Low-voltage fuses (HS 8536.10, 8536.30 and 8538.90)
Revision of the Mandatory Standard SI 60269 part 1 with a few changes in the normative references that appear in the Hebrew section. This draft standard revision adopts the International Standard IEC 60269-1 - Edition 4.1: 2009-11, |
12/17/2012 |
2/17/2013 |
Israel |
ISR/643 |
Electric transformers and reactors (HS 8504.31, 8504.32, 8504.50, 8531.80 and 9405)
Israel
Electric transformers and reactors (HS 8504.31, 8504.32, 8504.50, 8531.80 and 9405)
Revision of the Mandatory Standard SI 61558 part 2.4. This draft standard revision adopts the International Standard IEC 61558-2-4 - Edition 2.0:2009-02.
The major differences between the old version and this new revised draft standard are as follows:
- Changes the standard's scope and provides a detailed description of the types of device included in this standard;
- Adds to the standard's scope electrical, thermal and mechanical safety aspects.
- Removes the preferred values from paragraph 6.101 dealing with rated output voltage;
- Changes paragraph 12.102 dealing with no-load output voltage/output voltage under load and provides voltage limits to different types of transformers;
- Changes paragraph 19.1.2 dealing with construction and provide the insulation requirements between the primary and secondary coiling in different types of transformers. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/644 |
Electric transformers and reactors (HS 8504.31, 8504.32, 8504.50, 8531.80 and 9405)
Israel
Electric transformers and reactors (HS 8504.31, 8504.32, 8504.50, 8531.80 and 9405)
Revision of the Mandatory Standard SI 61558 part 2.5. This draft standard revision adopts the International Standard IEC 61558-2-5 - Edition 2.0:2010-06.
The major differences between the old version and this new revised draft standard are as follows:
- Adds to the standard's scope electrical, thermal and mechanical safety aspects;
- Changes the standard's scope and determines that the no-load output voltage does not exceed 275V a.c and the rated supply voltage does not exceed 250V a.c.;
- Adds to Note 3 of the standard's scope a few measures for attentions, such as: to protect the enclosure and the components inside it against external influences such as fungus, vermin, termites, solar-radiation etc., to consider the different conditions for transportation, storage, and operation, and to pay attention to additional requirements appearing in other standards and national rules that may be applicable to transformers intended for use in special environments. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/631 |
Industrial safety helmets (HS 6506.10)
Israel
Industrial safety helmets (HS 6506.10)
Revision of the Mandatory Standard SI 484 dealing with industrial safety helmets. This draft standard revision is an adoption of both the European Standard EN 397: February 2012 and the American Standard ANSI/ISEA Z89.1 - 2009, and allows compliance with either of them.
The major difference between the old version and this new revised draft standard is the new modifications introduced to the adopted international standards. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/636 |
Playground equipment (HS 9506.90, 9508)
Israel
Playground equipment (HS 9506.90, 9508)
First amendment to the Mandatory Standard SI 1498 Part 8. This amendment changes the requirements for playground protection and warnings appearing in paragraph 3.3.5. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/641 |
Electric hedge trimmers (HS 8433.11, 8433.19, 8461.20, 8464.20, 8467.20, 8479.10 and 8479.81).
Israel
Electric hedge trimmers (HS 8433.11, 8433.19, 8461.20, 8464.20, 8467.20, 8479.10 and 8479.81).
Revision of the Mandatory Standard SI 60745 part 2.15. This draft standard revision adopts the International Standard IEC 60745-2-15 - Edition 2.1: 2009-06. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/634 |
Cement (HS 2523)
Israel
Cement (HS 2523)
Revision of the Mandatory Standards SI 1 part 1 and SI 1 part 2 to be replaced with SI 1 part 1. This draft standard revision adopts the European Standard EN 197-1: September 2011. The adopted European Standard's scope applies also to sulfate-resistant Portland cements, which were included in SI 1 part 2. Therefore, this new draft revision replaces the two parts of SI 1.
The major differences between the old version and this new revised draft standard are as follows:
- Adds new requirements for sulfate-resistant common cements;
- Adds new requirements for common cements with a low early strength;
- Adds new requirements for low heat common cements. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/633 |
Children's drinking equipment (HS 3923, 3924, 4014.90)
Israel
Children's drinking equipment (HS 3923, 3924, 4014.90)
First amendment to the Mandatory Standard SI 5817 Part 2. This amendment changes the general requirement appearing in paragraph 4.1. It adds a new requirement for a manufacturer of drinking equipment made from thermoplastics containing polycarbonate and polysulfone to provide a manufacturer's declaration that the product does not contain Bisphenol A. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/638 |
Low-voltage fuses (HS 8536.10, 8536.30 and 8538.90)
Israel
Low-voltage fuses (HS 8536.10, 8536.30 and 8538.90)
Revision of the Mandatory Standard SI 60269 part 3. This draft standard revision adopts the International Standard IEC 60269-3 - Edition 4.0: 2010-05, with a few structural changes that appear in the introduction to the adopted International Standard and changes in the normative references that appear in the Hebrew section. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/642 |
Electric routers and trimmers (HS 8433.11, 8433.19, 8461.20, 8464.20, 8467.20, 8479.10 and 8479.81)
Israel
Electric routers and trimmers (HS 8433.11, 8433.19, 8461.20, 8464.20, 8467.20, 8479.10 and 8479.81)
Revision of the Mandatory Standard SI 60745 part 2.17. This draft standard revision adopts the International Standard IEC 60745-2-17 - Edition 3.0: 2010-05.
The major differences between the old version and this new revised draft standard are as follows:
- Adds to paragraph 8, dealing with marking and instructions, a new paragraph 8.12.1.1 dealing with specific safety warnings for routers;
- Adds to the normative Annex K dealing with battery tools and battery packs, new paragraphs K8.12.1.1, K12.4 a K21.18.2 clarifying the requirements for battery packs;
- Adds a new normative Annex M dealing with the safety of work stands for operation with hand-held motor-operated electric tools. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/632 |
Protective clothing (HS Ch 61-63)
Israel
Protective clothing (HS Ch 61-63)
Revision of the Mandatory Standard SI 1258 part 4 dealing with high-visibility warning clothing. This draft standard revision is an implementation of both the European Standard EN 471: 2003 (including A1: December 2007) and the American Standard ANSI/ISEA 107 - 2010, and allows compliance with either of them.
The major differences between the old version and this new revised draft standard are the new modifications introduced to the adopted American Standard, as follows:
- Adds new requirements for flame resistance (FR) as a voluntary characteristic for high-visibility warning clothing;
- Adds a requirement that flame resistance high-visibility warning clothing marked with FR must provide a manufacturer's certificate for compliance with one of the tests described in the standard;
- Adds new requirements for water-repellent, water-resistant and for water- impervious clothing;
- Adds new useful instructions for protecting high-visibility warning clothing. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/645 |
Electric transformers and reactors (HS 8504.31, 8504.32, 8504.50, 8531.80 and 9405)
Israel
Electric transformers and reactors (HS 8504.31, 8504.32, 8504.50, 8531.80 and 9405)
Revision of the Mandatory Standard SI 61558 part 2.6. This draft standard revision adopts the International Standard IEC 61558-2-6 - Edition 2.0:2009-02.
The major differences between the old version and this new revised draft standard are as follows:
- Adds to the standard's scope electrical, thermal and mechanical safety aspects;
- Removes the preferred values from paragraphs 6.101 and 6.102 dealing with rated output voltage;
- Removes some of the requirements included in the old version of paragraph 8.101 dealing with marking and other information;
- Removes some of the requirements included in the old version of paragraph 10.101 dealing with change of input voltage settings;
- Changes paragraph 19.1.1 dealing with construction-insulation and adds separate insulation requirements for Class I transformers.
- Changes paragraphs 19.1.2 through 19.1.6 dealing with construction and provides insulation requirements and inner connections according to the different types of transformers;
- Removes the requirement for plugs and socket-outlets on the output side to comply with the international standards IEC 884-2-4 and IEC 906-3 from paragraph 20.3 dealing with components. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/639 |
Electrical couplers (HS 8536.69, 8536.90)
Israel
Electrical couplers (HS 8536.69, 8536.90)
Revision of the Mandatory Standard SI 60320 part 1. This draft standard revision adopts the International Standard IEC 60320-1 - Edition 2.1: 2007-11.
The major differences between the old version and this new revised draft standard are as follows:
- Adds a translation to Hebrew to some of the definitions appearing in paragraph 3.
- Adds a marking requirement to paragraph 8 to comply also with Israel's Consumer Protection Law, Chapter IV: Labeling and Packing of Goods. |
12/17/2012 |
2/17/2013 |
Israel |
ISR/650 |
Electrical transformers (HS 8504.20, 8504.30)
Israel
Electrical transformers (HS 8504.20, 8504.30)
Revision of the Mandatory Standard SI 5484 to be replaced with SI 50464 part 1 and SI 50541 part 1. This draft standard revision adopts the European Standards EN 50464-1: April 2007 and EN 50541-1: April 2011 respectively. The new standards are significantly different from the old standards, as this revision includes both a division of the old standard and an adoption of 2 different European Standards. In addition, it is recommended to pay attention to the standards' Hebrew sections as they may include important local deviations. |
1/22/2013 |
3/22/2013 |
Israel |
ISR/648 |
Metal ball valve (HS 8481)
Israel
Metal ball valve (HS 8481)
Fourth amendment to the partially Mandatory Standard SI 1144. This amendment changes the following: -Adds to paragraph 102 dealing with references, a reference to SI 5452; -Adds to paragraph 104 dealing with classification two new paragraphs: 104.6 dealing with valves intended for drinking water and 106.7 dealing with valves not intended for drinking water; -Adds to paragraph 105 dealing with marking, 2 new paragraphs: 105.5 and 105.6 providing the marking requirement for valves intended for potable and unpotable water, as classified in paragraphs 104.6 and 104.7. |
1/22/2013 |
3/22/2013 |
Israel |
ISR/646 |
Valves (HS 8481)
Israel
Valves (HS 8481)
First amendment to the partially Mandatory Standard SI 272. This amendment changes the following: -Adds to paragraph 1.2 a reference to SI 5452; -Adds to paragraph 1.4 2 new paragraphs: 1.4.4 on valves intended for potable water and 1.6.5 on valves intended for unpotable water; -Changes paragraph 2.2 on materials and production methods and requires that all valve parts and coats intended for drinking water comply also with Israel Mandatory Standard SI 5452; -Changes the paragraph 2.8on base seals; -Adds to paragraph 2.10.3on marking, 2 new paragraphs: 2.10.3.1 and 2.10.3.2 providing the marking requirement for valves intended respectively for potable and unpotable water, as classified in paragraphs 1.4.4 and 1.4.5. |
1/22/2013 |
3/22/2013 |
Israel |
ISR/647 |
Valves (HS 8481)
Israel
Valves (HS 8481)
First amendment to the partially Mandatory Standard SI 790. This amendment changes the following: -Adds to paragraph 102 dealing with references, a reference to SI 5452; -Changes paragraph 202 dealing with materials and requires that all parts and coats comply also with Israel Mandatory Standard SI 5452; -Changes paragraph 206 dealing with the tap base seal; -Deletes paragraph 209 dealing with lubricants. |
1/22/2013 |
3/22/2013 |
Israel |
ISR/649 |
Electric water heaters (HS 8516.10)
Israel
Electric water heaters (HS 8516.10)
Revision of the Mandatory Standard SI 900 part 2.35. This draft standard revision adopts the International Standard IEC 60335-2-35 - Ed. 5.0: 2012-11. The major differences between the old version and this new revised draft standard are as follows: -Adds to the standard's scope a clarification that it does not take into account hazards caused by use of appliances by persons, including children, whose physical, sensory or mental capabilities may be imperfect or who lack of experience and knowledge; -Adds to paragraph 7.12.1 a new requirement to provide specific instructions for system with temperature controllable multiple water exits; -Adds a new paragraph 22.47 dealing with a water pressure resistance test in regular use; -Adds to paragraph 22.50 a new supplement clarifying that this paragraph does not apply when the shower water temperature control gets priority over the system control; -Adds to paragraph 22.51 a new supplement clarifying that this paragraph does not apply if the system's maximum temperature output exceeds 550C, when the shower water temperature control gets priority in setting the system's temperature. |
1/22/2013 |
3/22/2013 |
Israel |
ISR/651 |
Electric cables, cords and insulated conductors (HS 8544.42, 8544.49 and 4421.90)
Israel
Electric cables, cords and insulated conductors (HS 8544.42, 8544.49 and 4421.90)
Revision of the Mandatory Standard SI 60227 part 5. This draft standard revision adopts the International Standard IEC 60227-5 - Edition 3.0: 2011-09. The major differences between the old version and this new revised draft standard are as follows:
-Changes paragraph 1.2 dealing with the normative references;
-Adds measurements for flat tri-cord cable in Table 7 of paragraph 5 dealing with light polyvinyl chloride sheathed cord;
-Changes the headings of Table 9 in paragraph 6 dealing with ordinary polyvinyl chloride sheathed cord, and adds new requirements for conductor's nominal transect area of 0.5mm2;
-Adds measurements for flat tri-cord cable in Table 11 of paragraph 7 dealing with heat resistant PVC-sheathed cord for a maximum conductor temperature of 900C;
-Changes the headings of Table 9 of paragraph 8 dealing with heat resistant ordinary PVC-sheathed cord for a maximum conductor temperature of 900C, and adds new requirements for conductor's nominal transect area of 0.5mm2. In this table it also changes the rated insulation thickness for conductors with rated transect area of 1.5mm2 to from 0.7mm to 0.6mm and changes the rated insulation thickness for conductors with rated transect area of 2.5mm2 to from 0.8mm to 0.7mm. |
1/29/2013 |
3/29/2013 |
Israel |
ISR/654 |
Electric cables, Cords and insulated conductors (HS 8544.42, 8544.49 and 4421.90)
Israel
Electric cables, Cords and insulated conductors (HS 8544.42, 8544.49 and 4421.90)
Revision of the Mandatory Standard SI 60245 part 8. This draft standard revision adopts the International Standard IEC 60245-8 - Edition 1.2: 2012-01. The major differences between the old version and this new revised draft standard are as follows:
-Changes paragraph 1.1 dealing with the standard's scope;
-Changes paragraph 1.2 dealing with the normative references;
-Deletes paragraph 2 and all its sub-paragraphs dealing with rubber insulated and sheathed cords for applications requiring high flexibility;
-Deletes paragraph 4 and all its sub-paragraphs dealing with cross-linked PVC (XLPVC) insulated and sheathed cords for applications requiring high flexibility;
-Deletes Annex A dealing with requirements for the non-electrical tests for crossÂlinked polyvinyl chloride (XLPVC). |
1/29/2013 |
3/29/2013 |
Israel |
ISR/652 |
Electric cables, Cords and insulated conductors (HS 8544.42, 8544.49 and 4421.90)
Israel
Electric cables, Cords and insulated conductors (HS 8544.42, 8544.49 and 4421.90)
Revision of the Mandatory Standard SI 60245 part 3. This draft standard revision adopts the International Standard IEC 60245-3 - Second edition: 1994-07 and its Amendment 1: 1997-06 and Amendment 2: Edition 2.0 - 2011-09 and amends its normative references. |
1/29/2013 |
3/29/2013 |
Israel |
ISR/653 |
Electric cables, Cords and insulated conductors (HS 8544.42, 8544.49 and 4421.90)
Israel
Electric cables, Cords and insulated conductors (HS 8544.42, 8544.49 and 4421.90)
Revision of the Mandatory Standard SI 60245 part 4. This draft standard revision adopts the International Standard IEC 60245-4 - Edition 3.0: 2011-09. The major differences between the old version and this new revised draft standard are as follows:
-Changes paragraph 1.2 dealing with the normative references;
-Amends the measurements for type 53 and type 57 cables appearing in Table 1 and in Table 3. |
1/29/2013 |
3/29/2013 |