By Marc Rayman

As NASA’s Dawn spacecraft investigates its first target, the giant asteroid Vesta, Marc Rayman, Dawn’s chief engineer, shares a monthly update on the mission’s progress.

On May 3, 2011, the mapping camera on NASA’s Dawn spacecraft captured its first image (left) of the giant asteroid Vesta. Only 5 pixels across, the image didn’t provide any new information about the asteroid, but it was important for navigation purposes and provided an exciting first look at Dawn’s eventual target. About five months later, Dawn snapped the much more detailed image on the right from only 700 kilometers (435 miles) from the surface of Vesta and has since provided unparalleled views of the mysterious world. Image credit: NASA/JPL-Caltech

Dear Readers of all Dawnominations,

Far from Earth, on the opposite side of the sun, deep in the asteroid belt, Dawn is gradually spiraling around the giant protoplanet Vesta. Under the gentle pressure of its uniquely efficient ion propulsion system, the explorer is scaling the gravitational mountain from its low-altitude mapping orbit (LAMO) to its second high-altitude mapping orbit (HAMO2).

Dawn spent nearly five months in LAMO, circling the rocky world at an average altitude of 210 kilometers (130 miles) as it acquired a fabulous bounty of pictures; visible, infrared, neutron, and gamma ray spectra; and measurements of the gravity field. As we saw last month, the probe was far more productive in each investigation than the ambitious team members had expected or had ever dared hope it would be. With that outstanding success behind it, it is looking ahead and up to its work in HAMO2, about 680 kilometers (420 miles) high.

Dawn is the first spacecraft to explore Vesta, the second most massive resident of the main asteroid belt between Mars and Jupiter. Indeed, this is the only craft ever to orbit a body in the asteroid belt. No other missions are currently on the books to visit this remote, exotic world, which is now appreciated to be more closely related to the terrestrial planets (including Earth) than to typical asteroids. And now Dawn is receding from it. On May 1, it began the slow ascent to its next observation orbit. It may well be decades before another robotic ambassador from Earth comes as close to Vesta as this bold traveler has.

Humankind’s first exploration of Vesta has been exceptionally rewarding. A simple measure of that can be seen with just two photographs. More than two centuries after its discovery, this giant asteroid was first glimpsed by the approaching spaceship from Earth on May 3, 2011. From a distance of 1.2 million kilometers (750 thousand miles), or more than three times the separation between Earth and the moon, Dawn’s mapping camera perceived Vesta as only five pixels across. Each pixel spanned more than 110 kilometers (70 miles), revealing nothing new compared to what astronomers’ most powerful telescopes had shown (but the image was of importance for navigation purposes). Nevertheless, at the time, it was tremendously exciting to obtain the first views of a distant, unfamiliar shore after a voyage of more than 2.6 billion kilometers (1.6 billion miles) on the interplanetary ocean. Sighting our first celestial port of call more than three and a half years after this cosmic adventure began was thrilling indeed. But now, with more than 25 thousand spectacular photos in hand from much smaller distances, it is even more gratifying to acknowledge that first picture as one of the worst ever taken of Vesta. The Image of the Day from one year later
was acquired in October 2011 from 1,700 times closer; and most of the images have been obtained from LAMO, about 5,700 times nearer than that first one. Dawn has rapidly transformed Vesta from a mere fleck among the stars into a fascinating, complex and splendidly detailed world.

Keeping the remote vessel on the planned spiraling course from one mapping orbit to another presents the crew with a set of formidable challenges, but this team has accomplished the maneuvers to successively reach survey orbit, the first high-altitude mapping orbit (HAMO1) and LAMO. The current orbital transfer is complex and demanding, but it is proceeding very well. Controllers update the flight profile every few days to ensure the probe stays close to the carefully designed trajectory to HAMO2. To gain a sense of the progress, go here for your correspondent’s atypically succinct weekly summaries of the spiral status.

› Continue reading Marc Rayman’s Dawn Journal

By Marc Rayman

As NASA’s Dawn spacecraft investigates its first target, the giant asteroid Vesta, Marc Rayman, Dawn’s chief engineer, shares a monthly update on the mission’s progress.

This artist’s concept shows NASA’s Dawn spacecraft orbiting the giant asteroid Vesta. The depiction of Vesta is based on images obtained by Dawn’s framing cameras. Image credit: NASA/JPL-Caltech |
› Full image and caption

Dear Dawnright Spectacular Readers,

Dawn is wrapping up a spectacularly rewarding phase of its mission of exploration. Since descending to its low-altitude mapping orbit (LAMO) in December, the stalwart probe has circled Vesta about 800 times and collected a truly outstanding trove of precious observations of the protoplanet. Having far exceeded the plans, expectations, and even hopes for what it would accomplish when LAMO began, the ambitious explorer is now ready to begin its ascent. On May 1, atop its familiar blue-green pillar of xenon ions, the craft will embark upon the six-week spiral to its second high-altitude mapping orbit.

When the intricate plans for Dawn’s one-year orbital residence at Vesta were developed, LAMO was to be 70 days, longer than any other phase. Because of the many daunting challenges of exploring an uncharted, alien world in the forbidding depths of the asteroid belt so far from home, mission planners could not be confident of staying on a rigid schedule, and yet they wanted to make the most of the precious time at the giant asteroid. They set aside 40 days (with no committed activities) to use as needed in overcoming problems during the unique approach and entry into orbit as well as the intensive observation campaigns in survey orbit and the first high-altitude mapping orbit plus the complex spiral flights from each science orbit to the next. To no one’s surprise, unexpected problems did indeed arise on occasion, and yet in every case, the dedicated professionalism and expertise of the team (occasionally augmented with cortisol, caffeine, and carbohydrates) allowed the expedition to remain on track without needing to draw on that reserve. To everyone’s surprise and great delight, by the beginning of LAMO on December 12, the entirety of the 40 days remained available. Therefore, all of it was used to extend the time the spacecraft would spend at low altitude studying the fascinating world beneath it.

Dawn’s mission at Vesta, exciting and successful though it is, is not the craft’s sole objective. Thanks to the extraordinary capability of its ion propulsion system, this is the first vessel ever planned to orbit two extraterrestrial destinations. After it completes its scrutiny of the behemoth it now orbits, the second most massive resident of the main asteroid belt, Dawn will set sail for dwarf planet Ceres, the largest body between the orbits of Mars and Jupiter.

Since 2009, the interplanetary itinerary has included breaking out of Vesta orbit in July 2012 in order to arrive at Ceres on schedule in February 2015. Taking advantage of additional information they have gained on the spacecraft’s generation and consumption of electrical power, the performance of the ion propulsion system, and other technical issues, engineers have refined their analyses for how long the journey through the asteroid belt to Ceres will take. Their latest assessment is that they can shave 40 days off the previous plan, once again demonstrating the valuable flexibility of ion propulsion, and that translates into being able to stay that much longer at the current celestial residence. (This extension is different from the 40 days described above, because that was designed to ensure Dawn could complete its studies and still leave on schedule in July. For this new extension, the departure date is being changed.) Even though a larger operations team is required at Vesta than during the cruise to Ceres, the Dawn project has the wherewithal to cover the cost. Because operations at Vesta have been so smooth, no new funds from NASA are needed; rather, the project can use the money it had held in reserve in case of problems. In this new schedule, Dawn will gently free itself of Vesta’s gravitational hold on August 26.

Most of the bonus time has been devoted to extending LAMO by a month, allowing the already richly productive investigations there to be even better. (Future logs will describe how the rest of the additional time at Vesta will be spent.) With all sensors fully operational, the robotic explorer has been making the best possible use of its precious time at Vesta, revealing more and more thrilling details of an exotic world deep in the asteroid belt.

› Continue reading Marc Rayman’s Dawn Journal

By Marc Rayman

As NASA’s Dawn spacecraft investigates its first target, the giant asteroid Vesta, Marc Rayman, Dawn’s chief engineer, shares a monthly update on the mission’s progress.

This artist’s concept shows NASA’s Dawn spacecraft orbiting the giant asteroid Vesta. The depiction of Vesta is based on images obtained by Dawn’s framing cameras. Image credit: NASA/JPL-Caltech |
› Full image and caption

Dear Ups and Dawns,

Dawn is continuing its exploits at Vesta, performing detailed studies of the colossal asteroid from its low altitude mapping orbit (LAMO). The robotic ambassador is operating extremely well on behalf of the creatures it represents on a distant planet. On this second intercalary day of its ambitious adventure, the spacecraft is doing exactly what it was designed to do: exploring a previously uncharted alien world.

Although we usually describe LAMO as being at an average altitude of 210 kilometers (130 miles), that does not mean it is at a constant altitude. As we saw on the fourth anniversary of Dawn’s departure from Earth, there are two reasons the spacecraft’s height changes. One is that the elevation of the surface itself changes, so if the probe flew in a perfect circle around Vesta, its altitude would vary according to the topography. Like the planet from which Dawn embarked upon its deep space journey in 2007 (and even some of the residents there), Vesta is broadest near its equator, and that is where the ground generally reaches its greatest distance from the center. In addition, the ancient surface, battered over billions of years in the rough and tumble of the asteroid belt, displays remarkable variations in shape. The giant Rheasilvia basin is a scar from an extraordinary impact that excavated a region encompassing the south pole more than 500 kilometers (over 300 miles) in diameter. This immense gouge has left that part of Vesta at a much lower elevation than elsewhere. In the center of the enormous depression is the second tallest mountain known in the solar system, soaring to well over twice the height of Mt. Everest. The vertical range from the highest locations near the equator to the bottoms of the deepest craters within Rheasilvia is more than 60 kilometers (37 miles). So as Dawn loops around in just over four hours, the surface underneath it rises and falls dramatically.

The second reason is that the orbit itself is not exactly a circle. Let’s ignore for a moment the effect of the topography and focus solely on the shape of the craft’s path around Vesta. As Vesta rotates and Dawn revolves, the gravitational forces acting on the orbiter are always changing because of the irregular distribution of material inside the geologically complex protoplanet. This effect occurred at the higher altitudes as well, but it was much less pronounced there. Now that the adventurer is deep in the gravity field, the peaks and valleys of its own motion are magnified.

Navigators were very careful in choosing the parameters for LAMO, recognizing that the orbital waters were turbulent. Nevertheless, their mapping of the gravitational currents proved quite accurate, and the spacecraft has followed the planned course quite well. The lengthy and relatively technical discussions in the two previous logs described why the ship drifts off a little, but operators occasionally nudge it back with the ion propulsion system.

Orbits usually are best described by ellipses, like flattened circles. Now Vesta’s bumpy gravity field does not allow perfectly smooth, regular orbits at low altitude. Moreover, the variations in the strength of the gravitational attraction transform the orbits. Sometimes, the difference between the high point of a loop and the low point is less than 16 kilometers (10 miles). As the changing forces reshape the orbit, the ellipse gets more exaggerated, with the low points going lower and the high points going higher. The differences within one revolution grow to be more than 75 kilometers (47 miles). Thanks to the ingenious design of the orbital trajectory however, those same forces then will gradually attenuate the profile, causing it to become more round again. This pattern repeats every 11.5 days in LAMO. It is almost as if the orbit breathes slowly, its envelope expanding and contracting.

› Continue reading Marc Rayman’s Dawn Journal

By Marc Rayman

As NASA’s Dawn spacecraft investigates its first target, the giant asteroid Vesta, Marc Rayman, Dawn’s chief engineer, shares a monthly update on the mission’s progress.

The south pole of the giant asteroid Vesta, as imaged by the framing camera on NASA’s Dawn spacecraft in September 2011. Image credit: NASA/JPL-Caltech/UCLA/MPS/DLR/IDA |
› Full image and caption

Dear Asdawnished Readers,

Dawn is scrutinizing Vesta from its low-altitude mapping orbit (LAMO), circling the rocky world five and a half times a day. The spacecraft is healthy and continuing its intensive campaign to reveal the astonishing nature of this body in the mysterious depths of the main asteroid belt.

Since the last log, the robotic explorer has devoted most of its time to its two primary scientific objectives in this phase of the mission. With its gamma ray and neutron detector (GRaND), it has been patiently measuring Vesta’s very faint nuclear emanations. These signals reveal the atomic constituents of the material near the surface. Dawn also broadcasts a radio beacon with which navigators on distant Earth can track its orbital motion with exquisite accuracy. That allows them to measure Vesta’s gravity field and thereby infer the interior structure of this complex world. In addition to these top priorities, the spacecraft is using its camera and its visible and infrared mapping spectrometer (VIR) to obtain more detailed views than they could in the higher orbits.

As we have delved into these activities in detail in past logs, let’s consider here some more aspects of controlling this extremely remote probe as it peers down at the exotic colossus 210 kilometers (130 miles) beneath it.

Well, the first aspect that is worth noting is that it is incredibly cool! Continuing to bring this fascinating extraterrestrial orb into sharper focus is thrilling, and everyone who is moved by humankind’s bold efforts to reach into the cosmos shares in the experience. As a reminder, you can see the extraordinary sights Dawn has by going here for a new image every weekday, each revealing another intriguing aspect of the diverse landscape.

The data sent back are providing exciting and important new insights into Vesta, and those findings will continue to be announced in press releases. Therefore, we will turn our attention to a second aspect of operating in LAMO. Last month, we saw that various forces contribute to Dawn moving slightly off its planned orbital path. (That material may be worth reviewing, either to enhance appreciation of what follows or as an efficacious soporific, should the need for one ever arise.) Now let’s investigate some of the consequences. This will involve a few more technical points than most logs, but each will be explained, and together they will help illustrate one of the multitudinous complexities that must be overcome to make such a grand adventure successful.

› Continue reading Marc Rayman’s Dawn Journal

By Marc Rayman

As NASA’s Dawn spacecraft investigates its first target, the giant asteroid Vesta, Marc Rayman, Dawn’s chief engineer, shares a monthly update on the mission’s progress.

This 3-D video incorporates images from the framing camera instrument aboard NASA’s Dawn spacecraft from July to August 2011. The images were obtained as Dawn approached Vesta and circled the giant asteroid during the mission’s survey orbit phase. Survey orbit took place at an altitude of about 1,700 miles (2,700 kilometers). To view this video in 3-D use red-green, or red-blue, glasses (left eye: red; right eye: green/blue). Image credit: NASA/JPL-Caltech/UCLA/MPS/DLR/IDA
› See video

Dear Dawnward Spirals,

Continuing its ambitious campaign of exploration deep in the asteroid belt, Dawn has spent most of the past month spiraling ever closer to Vesta. Fresh from the phenomenal success of mapping the alien world in detail in October, the spacecraft and its human team members are engaged in one of the most complicated parts of the mission. The reward will be the capability to scrutinize this fascinating protoplanet further.

Thanks to the extraordinary performance of its ion propulsion system, Dawn can maneuver to different orbits that are best suited for conducting each of its scientific observations. The probe is now headed for its low altitude mapping orbit (LAMO), where the focus of its investigations will be on making a census of the atomic constituents with its gamma ray and neutron sensors and on mapping the gravity field in order to determine the interior structure of this protoplanet.

As secondary objectives, Dawn will acquire more images with its camera and more spectra with its visible and infrared mapping spectrometer. As we will see in a future log, these measurements will receive a smaller share of the resources than the high priority studies. The spectacular pictures obtained already will keep scientists happy for years, and you can continue to share in the experience of marveling at the astonishing discoveries by seeing some of the best views here, including scenes captured during the spiral to LAMO.

Planning the low altitude mapping orbit around massive Vesta, with its complicated gravity field, required a great deal of sophisticated analysis. Before Dawn arrived, mission designers studied a range of possible gravitational characteristics and honed the methods they would use for plotting the actual orbit once the details of the protoplanet’s properties were ascertained. In the meantime, the team used a tentative orbit at an altitude over the equator of 180 kilometers (110 miles). As explained in a previous log, the altitude varies both because the orbit is not perfectly circular and because Vesta displays such exceptional topography. The highest elevations turn out to be at the equator, and the average altitude of that orbit would be 200 kilometers (125 miles).

Now that navigators have measured Vesta’s gravity, they have the knowledge to refine the design for LAMO, and they decided to raise it by 10 kilometers (6 miles). The target then is an average altitude of 210 kilometers (130 miles). But there is more to the specification of the orbit than simply its height. To meet all of the scientific objectives, the orientation of this orbit needs to be different from the orientation of the previous orbits, the high altitude mapping orbit (HAMO) and survey orbit.

› Continue reading Marc Rayman’s Dawn Journal