The Mine Simulation Laboratory description narrative is accompanied by thumbnail photos and can be viewed in full view by clicking on the thumbnail photos.
Click Image To Enlarge |
The Mine Simulation Laboratory is an above-ground simulated mine that provides hands-on
training for MSHA inspectors and mining industry personnel. The 48,000 square foot facility
has a simulated coal mine with an indoor burn room on the lower level and a simulated
metal/nonmetal mine on the second floor level. The coal mine represents a room-and-pillar
setup with four (4) entries and nine (9) crosscuts. |
|
Click Image To Enlarge |
Instructors can arrange different passageways and ventilation. |
|
Click Image To Enlarge |
They can also introduce smoke and make other changes in the laboratory
to demonstrate different tactics and principles. A burn room is located on one
end of the simulated coal mine. The simulated metal/nonmetal mine contains
passageways, tunnels, stairways, and ladders to simulate different manways
and other practical aspects of mine rescue problems. Fires are built, under
controlled conditions, to teach students the principles of fire fighting
and emergency ventilation techniques that may be encountered in a mine
emergency. |
|
Click Image To Enlarge |
A 100,000 cubic-foot-per-minute mine fan, controlled by solid state
electronics, can vary the volume of air delivered throughout the entries
and crosscuts in the two simulated mines.
Students are given simulated exercises which provide near actual mine emergency and fire
fighting experience unavailable anywhere else in the world. After participating in the simulation
training, students leave the Academy with a better idea of how to handle and perform in an actual
mine emergency situation. | |