Main Page
From Engineering Policy Guide
HELPFUL EPG VIDEOS: | •Logging into the EPG | |
•Finding Info in the EPG | ||
•Article History & How to Receive EMails When Articles are Revised |
RECENT POLICY CHANGES IN THE EPG | |||||||||||||||||||||||||||
MoDOT has made great strides to build a good transportation system and increase taxpayers' trust in its ability to deliver what was promised. Innovative concepts, such as Practical Design and design-build, were used to deliver those commitments and have made MoDOT a leader in the transportation industry. These forward-thinking, innovative concepts are reflected in the ENGINEERING POLICY GUIDE (EPG). This document provides a single reference for all engineering and engineering-related guidance by combining the former Right of Way, Design, Bridge, Construction, Traffic and Maintenance manuals. MediaWiki, the engine behind the Wikipedia on the World Wide Web, is the software delivering the EPG. Millions of hits on the EPG endorse this format to be easy to navigate and pleasing to read. A small HELP ARTICLE is included to assist with helpful hints on how to use the EPG as well as other points of interest. ![]() ![]()
|
Removal of Expansion Device Movement Gauge Notes and Details 11/1/12: Movement gauge details (all of EPG 751.12.2.11 and EPG 751.50 notes H11.24, H11.25 and H11.26) were removed. Because inspectors were finding their plates bent upwards, it was decided to no longer require these notes and details. Gap measurements will still be measured and recorded with corresponding temperature for tracking purpose. Engineering Professional Services, Consultant Qualifications 11/1/12: Guidance was added to EPG 134.1.3, #6 Bridge Consultants Only that the Bridge Experience Profile and Personal Bridge Experience Record forms must be updated every 3 years. Missouri Welcome Center Affiliates Sign 11/1/12: Guidance for where this sign is allowed was expanded in EPG 903.10.6 Missouri Welcome Center Affiliates. Emergency Reference Markers 11/1/12: Guidance was added to EPG 903.9.4 Emergency Reference Markers for sign use on non-interstate freeways and expressways and sign use for overlapping routes. Truck-Mounted Attenuator Training 10/31/12: EPG 612.4 Truck-Mounted Attenuator Training now presents the latest guidance. The main addition to the article was info about equipment/materials stored in the bed of the host vehicle. 10/29/12: This article has been generally revised for greater clarification. Equipment/Materials Stored in Bed of Host Vehicle 10/29/12: In EPG 612.1 Truck- and Trailer-Mounted Attenuators, guidance was added about hauling material in the back of a vehicle with a TMA. Consultant Contract Negotiation, Basis of Payment 10/25/12: In EPG 134.3.5 Basis of Payment, the mileage reimbursable rate was changed from the IRS rate to GSA's current POV Mileage Reimbursable Rate. Replacing, Maintaining or Modifying the Placement of a Warning Sign 10/23/12: A statement was added reiterating useful Table 903.6.6 Guidelines for Advance Placement of Warning Sign information for the districts. Request for Transfer of Inspected Materials 10/22/12: This form has been updated in EPG 101 Standard Forms, Materials Related. TA-10a, Flagger Assistance Devices (AFAD) with Red and Amber Signal System 10/18/12: TA-10a was updated to correctly show that the maximum distance between AFADs is 1/2 mile. 10/18/12: This QRG has had a major revision. Acceptance Sampling and Testing Procedures 10/18/12: The Federal Aid Sampling and Testing (FAST) table was split. The "Stabilized Permeable Base" information was moved to EPG 302.2.1.1 and the "Modified Subgrade" information was moved to EPG 205.2.2.3.7. This revision is a result of switching from project-based to system-based Independent Assurance and of going to a QC/QA sampling and testing approach on MoDOT roads. FAST guidance in EPG 123.3.3 was also revised. EPG 134.3.4 Audit Pre-Negotiation Review 10/16/12: A helpful clarification was added to copy Pre-Audit information to Design and/or Bridge Liaisons. Moving Superstructure Slab Bars 10/15/12: In EPG 751.10.1.7 and EPG 751.10.2.2 added details and in EPG 751.50 E3 added notes indicating slab bars that may be moved for construction purposes and showing bar clearance to top mat of slab steel info not given before. Revisions will make tying barrier bars simpler. Consultant Performance Appraisals 10/12/12: In EPG 134.5.4 Consultant Performance Appraisals and EPG 136.4.3.3 Consultant Performance Appraisals, guidance was clarified for both MoDOT and LPA personnel on how to document consultant evaluations. EPG 1039.2.4.2 Sampling of Epoxy Polymer Concrete 10/12/12: Guidance for the sampling frequency has been revised to bring it in line with current practices. Engineering Professional Services - Rating/Scoring the Consultants 10/11/12: In EPG 134.2.2.5 Selection of Consultant, Rating/Scoring the Consultants, the guidance about listing the consultants was clarified. Project-Specific Information for the SWPPP 10/11/12: Project offices will be responsible for completing Form 806.8.2, Project-Specific SWPPP Information for all jobs with one or more acres of total land disturbance. Steel Plates in the Roadway 10/10/12: Guidance on the use and installation of steel plates on high-speed roadways is now available at EPG 616.6.46, EPG 616.23.3 Typical Applications and EPG 770.7.2 Concrete Deck Maintenance. Turned-Down Guardrail Ends 10/10/12: Turned-down guardrail ends have been determined to be rarely appropriate and the practice is now prohibited. Guidance has been removed from EPG 616.1.3.6 Bridge Ends. Anchor Bolt Wells 10/10/12: Guidance in EPG 712.1.3 Bearing (During Construction), EPG 751.11.3.5 Anchor Bolts and EPG 751.50 G1.15 notes and note H3.1 now allow the use of permanently placed galvanized corrugated steel pipe as forms for anchor bolt wells. If this method not used and drilling is required, the reinforcement is not to be cut. "How to Develop a Winning Project Application" 10/5/12: This useful PowerPoint tutorial for LPAs is now available in EPG 136.3 Federal Aid Basics. EPG 131.2 Proprietary Items and Public Interest Findings 10/4/12: The process of submitting requests for approval of proprietary items has been streamlined. Submit requests to codeproprietary@modot.mo.gov for consideration. While this applies to both STIP and LPA projects, LPA projects must be submitted through the appropriate MoDOT staff (not directly from the LPA). Upon approval, an e-mail with a link to the approved request's digital image will be issued. Standard Detailing Notes for Overcoating Existing Steel 10/4/12: Two notes pertaining to limits of paint overlap requirements were added. |