News Release Information

12-1127-DAL

Tuesday, June 5, 2012

Contacts

Further information:

Occupational Employment and Wages in Tulsa, May 2011


Workers in the Tulsa Metropolitan Statistical Area had an average (mean) hourly wage of $19.22 in May 2011, about 12 percent below the nationwide average of $21.74, according to the U.S. Bureau of Labor Statistics. Regional Commissioner Stanley W. Suchman noted that, after testing for statistical significance, wages in the local area were significantly lower than their respective national averages in 16 of 22 major groups including: education, training, and library occupations; construction and extraction; and management.

When compared to the nationwide distribution, local employment was more highly concentrated in 6 of the 22 occupational groups, including production, construction and extraction, and office and administrative support. Conversely, nine groups had employment shares significantly below their national representation, including education, training, and library; personal care and service; and computer and mathematical. (See table A and box note at end of release.)


Table A. Occupational employment and wages by major occupational group, United States and the Tulsa Metropolitan Statistical Area, and measures of statistical significance, May 2011
Major occupational group Percent of total employment Mean hourly wage
United
States
Tulsa United
States
Tulsa Percent
difference(1)

Total, all occupations

100.0% 100.0% $21.74 $19.22 * -12

Management

4.8 5.5 * 51.64 42.43 * -18

Business and financial operations

4.8 4.6 33.05 27.67 * -16

Computer and mathematical

2.7 1.8 * 37.85 31.23 * -17

Architecture and engineering

1.8 2.0 * 37.08 35.39 -5

Life, physical, and social science

0.8 0.4 * 32.44 32.88 1

Community and social service

1.5 1.1 * 21.07 17.79 * -16

Legal

0.8 0.7 47.30 45.02 -5

Education, training, and library

6.6 5.4 * 24.46 19.42 * -21

Arts, design, entertainment, sports, and media

1.3 0.8 * 25.89 19.39 * -25

Healthcare practitioners and technical

5.9 5.8 34.97 30.76 * -12

Healthcare support

3.1 3.3 13.16 11.66 * -11

Protective service

2.5 2.0 20.54 17.76 * -14

Food preparation and serving related

8.7 8.3 10.30 9.38 * -9

Building and grounds cleaning and maintenance

3.3 2.8 * 12.29 10.74 * -13

Personal care and service

2.8 1.8 * 11.84 11.09 * -6

Sales and related

10.6 10.8 18.04 16.30 * -10

Office and administrative support

16.7 17.8 * 16.40 15.00 * -9

Farming, fishing, and forestry

0.3 0.1 * 11.68 11.32 -3

Construction and extraction

3.9 5.1 * 21.46 17.13 * -20

Installation, maintenance, and repair

3.9 4.8 * 20.86 20.13 -3

Production

6.5 9.0 * 16.45 16.77 2

Transportation and material moving

6.7 6.2 * 15.96 14.90 * -7

Footnotes:
(1) A positive percent difference measures how much the mean wage in Tulsa is above the national mean wage, while a negative difference reflects a lower wage.

* The percent share of employment or mean hourly wage for this area is significantly different from the national average of all areas at the 90-percent confidence level.


One occupational group–production–was chosen to illustrate the diversity of data available for any of the 22 major occupational categories. Tulsa had 36,560 jobs in production, accounting for 9.0 percent of local area employment, significantly higher than the 6.5-percent share nationally. The average hourly wage for this occupational group locally was $16.77 compared to the national wage of $16.45.

With employment of 6,080, team assemblers was the largest occupation within the production group, followed by welders, cutters, solderers, and brazers (4,060) and inspectors, testers, sorters, samplers, and weighers (2,650). Among the higher paying jobs were gas plant operators and first-line supervisors of production and operating workers, with mean hourly wages of $33.02 and $26.55, respectively. At the lower end of the wage scale were laundry and dry-cleaning workers ($9.15) and packaging and filling machine operators and tenders ($11.41). (Detailed data for production workers are presented in table 1; for a complete listing of all detailed occupations go to www.bls.gov/oes/current/oes_46140.htm.)

Location quotients allow us to explore the occupational make-up of a metropolitan area by comparing the composition of jobs in an area relative to the national average. (See table 1.) For example, a location quotient of 2.0 indicates that an occupation accounts for twice the share of employment in the area than it does nationally. In the Tulsa Metropolitan Statistical Area, above average concentrations of employment were found in many of the occupations within the production group. For instance, petroleum pump system operators, refinery operators, and gaugers were employed at 5.1 times the national rate in Tulsa, and welders, cutters, solderers, and brazers, at 4.0 times the U.S. average. On the other hand, printing press operators had a location quotient of 0.9 in Tulsa, indicating that this particular occupation’s local and national employment shares were similar.

These statistics are from the Occupational Employment Statistics (OES) survey, a federal-state cooperative program between BLS and State Workforce Agencies, in this case, the Oklahoma Employment Security Commission. The OES survey provides estimates of employment and hourly and annual wages for wage and salary workers in 22 major occupational groups and nearly 800 detailed occupations for the nation, states, metropolitan statistical areas, metropolitan divisions, and nonmetropolitan areas.



OES wage and employment data for the 22 major occupational groups in the Tulsa Metropolitan Statistical Area were compared to their respective national averages based on statistical significance testing. Only those occupations with wages or employment shares above or below the national wage or share after testing for significance at the 90-percent confidence level meet the criteria.

NOTE: A value that is statistically different from another does not necessarily mean that the difference has economic or practical significance. Statistical significance is concerned with the ability to make confident statements about a universe based on a sample. It is entirely possible that a large difference between two values is not significantly different statistically, while a small difference is, since both the size and heterogeneity of the sample affect the relative error of the data being tested.



Technical Note

The Occupational Employment Statistics (OES) survey is a semiannual mail survey measuring occupational employment and wage rates for wage and salary workers in nonfarm establishments in the United States. Guam, Puerto Rico, and the Virgin Islands also are surveyed, but their data are not included in the national estimates. OES estimates are constructed from a sample of about 1.2 million establishments. Forms are mailed to approximately 200,000 establishments in May and November of each year for a 3-year period. The nationwide response rate for the May 2011 survey was 77.3 percent based on establishments and 73.3 percent based on employment. May 2011 estimates are based on responses from six semiannual panels collected over a 3-year period: May 2011, November 2010, May 2010, November 2009, May 2009, and November 2008. The sample in the Tulsa Metropolitan Statistical Area included 3,550 establishments with a response rate of 79 percent. For more information about OES concepts and methodology, see www.bls.gov/news.release/ocwage.tn.htm.

The May 2011 OES estimates are based in part on data collected using the 2010 Standard Occupational Classification (SOC) system. Nearly all the occupations in this release are 2010 SOC occupations; however, some are not. The May 2012 OES data will reflect the full set of detailed occupations in the 2010 SOC. For a list of all occupations, including 2010 SOC occupations, and how data collected on two structures were combined, see the OES Frequently Asked Questions online at www.bls.gov/oes/oes_ques.htm#Ques41.

Area definitions

The substate area data published in this release reflect the standards and definitions established by the U.S. Office of Management and Budget. The Tulsa Metropolitan Statistical Area (MSA) includes Creek, Okmulgee, Osage, Pawnee, Rogers, Tulsa, and Wagoner Counties in Oklahoma.

Additional information

OES data are available on our regional web page at www.bls.gov/ro6. If you have additional questions, contact the Southwest Information Office at 972-850-4800. Information in this release will be made available to sensory impaired individuals upon request – Voice phone: 202-691-5200; TDD message referral phone: 1-800-877-8339.


Table 1. Employment and wage data from the Occupational Employment Statistics survey, by occupation,
Tulsa Metropolitan Statistical Area, May 2011
Occupation(1) Employment Mean wages
Level(2) Location
quotient(3)
Hourly Annual(4)

Production occupations

36,560 1.4 $16.77 $34,880

First-line supervisors of production and operating workers

2,520 1.4 26.55 55,230

Electrical and electronic equipment assemblers

450 0.8 16.02 33,320

Electromechanical equipment assemblers

160 1.0 16.00 33,290

Engine and other machine assemblers

240 2.1 19.12 39,760

Structural metal fabricators and fitters

630 2.6 16.50 34,330

Fiberglass laminators and fabricators

(5) (5) 15.07 31,350

Team assemblers

6,080 2.0 13.54 28,170

Assemblers and fabricators, all other

250 0.3 14.21 29,550

Bakers

580 1.2 11.50 23,920

Butchers and meat cutters

360 0.9 12.54 26,090

Meat, poultry, and fish cutters and trimmers

50 0.1 13.28 27,630

Slaughterers and meat packers

(5) (5) 10.58 22,010

Food batchmakers

180 0.6 11.12 23,140

Food cooking machine operators and tenders

320 3.3 12.59 26,190

Computer-controlled machine tool operators, metal and plastic

450 1.1 16.47 34,270

Computer numerically controlled machine tool programmers, metal and plastic

80 1.3 25.07 52,150

Extruding and drawing machine setters, operators, and tenders, metal and plastic

140 0.6 16.13 33,550

Forging machine setters, operators, and tenders, metal and plastic

50 0.7 20.00 41,600

Rolling machine setters, operators, and tenders, metal and plastic

170 1.6 16.15 33,600

Cutting, punching, and press machine setters, operators, and tenders, metal and plastic

760 1.3 14.10 29,330

Drilling and boring machine tool setters, operators, and tenders, metal and plastic

220 3.3 15.76 32,780

Grinding, lapping, polishing, and buffing machine tool setters, operators, and tenders, metal and plastic

300 1.3 13.50 28,080

Lathe and turning machine tool setters, operators, and tenders, metal and plastic

390 3.0 19.30 40,150

Milling and planing machine setters, operators, and tenders, metal and plastic

100 1.4 16.36 34,030

Machinists

2,300 2.0 17.57 36,540

Pourers and casters, metal

40 1.1 14.22 29,570

Foundry mold and coremakers

40 1.0 11.21 23,310

Molding, coremaking, and casting machine setters, operators, and tenders, metal and plastic

250 0.7 12.60 26,210

Multiple machine tool setters, operators, and tenders, metal and plastic

230 0.9 16.65 34,630

Tool and die makers

190 0.8 22.28 46,350

Welders, cutters, solderers, and brazers

4,060 4.0 18.61 38,710

Welding, soldering, and brazing machine setters, operators, and tenders

300 2.4 17.35 36,090

Heat treating equipment setters, operators, and tenders, metal and plastic

90 1.4 15.08 31,370

Plating and coating machine setters, operators, and tenders, metal and plastic

130 1.3 14.26 29,660

Tool grinders, filers, and sharpeners

60 1.7 15.82 32,900

Metal workers and plastic workers, all other

90 1.3 11.64 24,210

Prepress technicians and workers

150 1.1 16.36 34,030

Printing press operators

530 0.9 14.61 30,390

Print binding and finishing workers

140 0.8 12.95 26,930

Laundry and dry-cleaning workers

760 1.2 9.15 19,040

Pressers, textile, garment, and related materials

(5) (5) 9.50 19,760

Sewing machine operators

170 0.4 11.80 24,550

Cabinetmakers and bench carpenters

200 0.8 12.84 26,710

Sawing machine setters, operators, and tenders, wood

90 0.7 12.16 25,290

Power plant operators

50 0.4 24.54 51,050

Stationary engineers and boiler operators

180 1.7 23.96 49,830

Water and wastewater treatment plant and system operators

240 0.7 14.62 30,410

Gas plant operators

50 1.4 33.02 68,680

Petroleum pump system operators, refinery operators, and gaugers

680 5.1 26.24 54,570

Chemical equipment operators and tenders

80 0.5 17.23 35,840

Crushing, grinding, and polishing machine setters, operators, and tenders

40 0.4 11.39 23,690

Grinding and polishing workers, hand

150 1.8 14.15 29,430

Mixing and blending machine setters, operators, and tenders

430 1.1 17.11 35,590

Cutters and trimmers, hand

40 0.9 12.94 26,920

Cutting and slicing machine setters, operators, and tenders

200 1.1 13.20 27,460

Extruding, forming, pressing, and compacting machine setters, operators, and tenders

140 0.7 17.82 37,060

Furnace, kiln, oven, drier, and kettle operators and tenders

150 2.5 15.07 31,340

Inspectors, testers, sorters, samplers, and weighers

2,650 1.9 21.53 44,780

Jewelers and precious stone and metal workers

50 0.7 20.34 42,310

Dental laboratory technicians

150 1.2 14.05 29,230

Medical appliance technicians

30 0.8 13.14 27,330

Ophthalmic laboratory technicians

(5) (5) 11.82 24,590

Packaging and filling machine operators and tenders

1,040 0.9 11.41 23,740

Coating, painting, and spraying machine setters, operators, and tenders

820 3.3 15.30 31,820

Painters, transportation equipment

270 1.9 18.95 39,420

Painting, coating, and decorating workers

40 0.6 12.75 26,520

Photographic process workers and processing machine operators

140 0.9 10.60 22,050

Cleaning, washing, and metal pickling equipment operators and tenders

30 0.6 12.01 24,980

Cooling and freezing equipment operators and tenders

30 1.3 12.31 25,610

Molders, shapers, and casters, except metal and plastic

140 1.4 17.42 36,240

Paper goods machine setters, operators, and tenders

410 1.4 22.54 46,890

Helpers-production workers

1,870 1.4 12.95 26,930

Production workers, all other*

280 0.4 14.18 29,500

Footnotes:
(1) For a complete listing of all detailed occupations in the Tulsa MSA, see www.bls.gov/oes/current/oes_46140.htm.
(2) Estimates for detailed occupations do not sum to the totals because the totals include occupations not shown separately. Estimates do not include self-employed workers.
(3) The location quotient is the ratio of the area concentration of occupational employment to the national average concentration. A location quotient greater than one indicates the occupation has a higher share of employment than average, and a location quotient less than one indicates the occupation is less prevalent in the area than average.
(4) Annual wages have been calculated by multiplying the hourly mean wage by a 'year-round, full-time' hours figure of 2,080 hours; for those occupations where there is not an hourly mean wage published, the annual wage has been directly calculated from the reported survey data.
(5) Estimates not available.

* Occupation titles followed by an asterisk (*) have similar titles, but not necessarily the same content as 2010 SOC occupations.

Last Modified Date: June 5, 2012