Mining Product: Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 8: 6.0 Safety File Guidance
Original creation date: April 2006
Authors: JJ Sammarco
NIOSHTIC2 Number: 20029935
Pittsburgh, PA: U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 2006-130, Information Circular 9487, 2006 Apr; :1-40
This report (Safety File Guidance 6.0) is the eighth in a nine-part series of recommendations and guidance addressing the functional safety of processor-controlled mining equipment. It is part of a risk-based system safety process encompassing hardware, software, humans, and the operating environment for the equipment's life cycle. Figure 1 shows a safety framework containing these recommendations. The reports in this series address the various life cycle stages of inception, design, approval and certification, commissioning, operation, maintenance, and decommissioning. These recommendations were developed as a joint project between the National Institute for Occupational Safety and Health and the Mine Safety and Health Administration. They are intended for use by mining companies, original equipment manufacturers, and aftermarket suppliers to these mining companies. Users of these reports are expected to consider the set in total during the design cycle.
![Image of publication Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 8: 6.0 Safety File Guidance](https://webarchive.library.unt.edu/web/20201221112742im_/https://www.cdc.gov/niosh/mining/UserFiles/works/images/2006-130.jpg)
NIOSHTIC2 Number: 20029935
Pittsburgh, PA: U.S. Department of Health and Human Services, Public Health Service, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, DHHS (NIOSH) Publication No. 2006-130, Information Circular 9487, 2006 Apr; :1-40
- Addressing the Safety of Programmable Electronic Mining Systems: Lessons Learned
- Comparison of Methods: Dynamic Versus Hydrostatic Testing of Mine Ventilation Seals
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 1: 1.0 Introduction
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 2: 2.1 System Safety
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 4: 3.0 Safety File
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 5: 4.0 Independent Functional Safety Assessment
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 6: 5.1 System Safety Guidance
- Programmable Electronic Mining Systems: Best Practice Recommendations (In Nine Parts): Part 9: 7.0 Independent Functional Safety Assessment Guidance
- Proximity Warning Systems for Mining Equipment
- Underground Test Results of a Laser-Based Tram Control System for a Continuous Miner