Add a Journal to PMC
This page describes the process for adding a journal to PubMed Central (PMC) and explains what is required of participating journals. Interested publishers should also review the PMC FAQs and Deposit and Access Policies.
Participation in PMC is open to any English-language life sciences journal that meets NLM's standards for the archive. A journal must qualify on two levels, both the Scientific quality of the publication, and the Technical quality of the digital files.
On This Page:
1. The PMC Application Process
![Step 1](https://webarchive.library.unt.edu/web/20121016193106im_/http://www.ncbi.nlm.nih.gov/pmc/assets/step1_bubble.png)
Publisher initiates the application process
To begin the PMC application process, the journal publisher should send an email to pmc@ncbi.nlm.nih.gov indicating what it wishes to include in PMC. For each journal, please provide:
- The full title of the journal.
- The ISSN.
- A URL for the journal site, if the journal is online.
![Step 2](https://webarchive.library.unt.edu/web/20121016193106im_/http://www.ncbi.nlm.nih.gov/pmc/assets/step2_bubble.png)
PMC Scientific Quality Review
After a review of the journal information, PMC will inform the publisher whether or not the journal meets PMC's scientific quality standard. For journals that meet this standard, the process continues to step 3.
![Step 3](https://webarchive.library.unt.edu/web/20121016193106im_/http://www.ncbi.nlm.nih.gov/pmc/assets/step3_bubble.png)
PMC Technical Evaluation
The publisher submits a representative set of sample files, which are evaluated to ensure that the journal's data meets PMC's technical quality standards. Keep in mind that:
- The sample set must comprise approximately 50 articles and be representative of the variety of article types, styles and file formats found in the journal. Smaller samples may be evaluated at PMC's discretion.
- The sample set must include all of the files listed under “Files to be deposited for each article” in the PMC Technical Requirements section.
- The sample files must, at a minimum, satisfy ALL the requirements in the PMC Minimum Data Criteria document.
- Each sample package must be named, organized and packaged according to the PMC conventions described in the File Organization, Packaging, and Delivery section of the PMC File Submission Specifications.
Upon receipt of a journal's sample files, PMC first verifies that the submission satisfies all the requirements in the PMC Minimum Data Criteria document.
Note:
If a submission fails to meet PMC's minimum data criteria at any stage of the application process, the journal's application will be rejected.
If a submission satisfies the minimum data criteria, PMC does a more extensive review of the files, specifically checking that:
- The XML/SGML tagging conforms to its DTD.
- The online presentation of an article, as generated from the XML/SGML and associated image files, is an accurate, error-free, and complete display of the article. This check is made against the published article of record, typically the PDF or full text article at the journal's own site.
Once the data evaluation is complete, PMC sends the publisher a report specifying what needs to be corrected. The publisher corrects the problems and resubmits the sample for evaluation. If, on the third submission, there are still problems, the journal's application will be rejected.
![Step 4](https://webarchive.library.unt.edu/web/20121016193106im_/http://www.ncbi.nlm.nih.gov/pmc/assets/step4_bubble.png)
Preproduction Phase
After the data evaluation phase is complete:
- PMC will ask the publisher to complete a formal PMC Participation Agreement with NLM.
- After the agreement details have been confirmed, PMC will ask the publisher to deposit a complete set of files for all issues up to the present that are to be included in the archive. Prior to sending these files to PMC, the publisher must correct all data problems similar to those that were found in the sample set.
- PMC processes the complete set of files supplied by the publisher, and performs quality assurance checks on the content. If any data corrections are required, PMC sends a report to the publisher requesting corrections.
- The publisher provides journal presentation information. See the PMC Journal Setup Requirements for details.
- Once the files provided by the publisher are problem-free, PMC sets up the journal based on the presentation information provided by the publisher, and posts the content on a preview site for the publisher to review. PMC corrects any problems on its end that may be found in this review.
Note:
If PMC finds significant data problems in the publisher's full set of files, the journal's application may be rejected.
![Step 5](https://webarchive.library.unt.edu/web/20121016193106im_/http://www.ncbi.nlm.nih.gov/pmc/assets/step5_bubble.png)
Live in PMC
NLM countersigns the publisher's PMC Participation Agreement and releases the journal to the PMC public site with the publisher's approval.
2. PMC's Scientific Quality Standard
A journal will be deemed to be eligible for inclusion in PMC if the NLM Selection and Acquisition Section determines that it conforms to the scientific quality criteria specified in the Collection Development Manual of the National Library of Medicine. See the NLM Technical Services Division fact sheet for more information about this NLM group and NLM's collection development policy.
3. Prerequisites for Newly Created Journals
In the case of a journal that has just begun publishing or has not yet published any articles, please note the following:
- The journal must have a properly registered ISSN before making any kind of application to PMC. This means that there must be a record for the journal in the official Register of the ISSN International Centre.
- The journal must have a reasonable number of published articles in order for NLM to make a decision about its scientific quality.
4. PMC's Technical Requirements
Required Files
A journal must provide PMC with the full text of articles in an XML (eXtensible Markup Language) or SGML (Standard Generalized Markup Language) format that conforms to an acceptable journal article DTD (Document Type Definition). PMC does not accept articles in HTML format.
NLM has a Journal Publishing XML DTD that any journal may use to submit its data. PMC will also accept data in other full-text article DTDs that are widely used in life sciences journal publishing.
Files to be deposited for each article:
- A separate XML or SGML data file for the full text of each article.
- The original high-resolution digital image files for all figures in each article.
- A PDF, if one exists, in addition to the XML/SGML version (but not as the only form.)
- Supplementary data files (e.g., spreadsheets or video files) available with the article.
5. Minimum Criteria for PMC Data Evaluation Submissions
Note:
If a sample file submission fails to meet these minimum requirements, a journal’s application to PMC will be rejected.
- Each sample package must be complete: all required data files
(XML/SGML, PDF if available, image files, supplementary data files)
for every article in the package must be present and named correctly.
- XML and PDF base file names must match exactly.
- Data file names must exactly match the names that are called out in the XML/SGML in name and case.
- All XML files must conform to an acceptable journal article DTD. If you plan on submitting articles in a format other than the NLM Journal Publishing DTD, please contact PMC at pmc@ncbi.nlm.nih.gov prior to submitting any files.
- All XML/SGML files must parse according to their DTD.
PMC validates data using the PUBLIC ID in the DOCTYPE declaration in each source file.
Note:
If you are using the NLM Journal Publishing DTD, PMC strongly suggests that you tag your articles so that they conform to PMC Style You can use the Online PMC Style Checker to confirm that an XML file in the NLM DTD conforms to PMC Style.
- Regardless of the XML/SGML DTD used, the following metadata information must be present
and tagged with correct values in every sample file:
- Journal ISSN or other unique Journal ID
- Journal Publisher
- Copyright statement (if applicable)
- License statement (if applicable)
- Volume
- Issue number (if applicable)
- Pagination/article sequence number.
- Issue-based or Article-based publication dates.
Note:
Articles submitted to PMC must contain publication dates that accurately reflect the journal’s publication model, following these general guidelines for publication date tagging
- All image files for figures must be legible, and submitted in high-resolution TIFF or EPS format, according to the Figure Graphic Formatting Guidelines
6. PMC Participation Agreements
Before a journal is released publicly in PMC, the publisher must complete a formal PMC Participation Agreement with NLM. There are three types of agreements, which correspond to how much content a journal plans to deposit. Click on the links below to get a copy of the respective agreement in Microsoft Word format.
- Full Participation: the journal commits to depositing the complete contents of each issue or volume, starting with a particular volume/issue or publication date.
- NIH Portfolio: the journal commits to depositing all NIH-funded articles (as defined by the NIH Public Access Policy), starting with a particular volume/issue or publication date. The journal may choose to also deposit other, non-NIH-funded articles under this agreement.
- Selective Deposit: generally used by publishers who offer a hybrid publishing model, i.e., a traditional subscription-based journal in which selected articles are published as "open access." Some of these journals deposit only the open access articles in PMC. This agreement also may be used for other sets of articles that are more limited than those covered by a full participation or NIH portfolio agreement.
A publisher should use an Additional Journals amendment, instead of completing a new agreement, if it already has a PMC Full Participation or NIH Portfolio agreement with NLM and wishes to include additional journals in PMC under similar terms.