OMB No. 3117-0016/USITC No. 04-2-2187; Expiration Date: 6/30/05

(No response is required if currently valid OMB control number is not displayed)

Return completed questionnaire to:

UNITED STATES INTERNATIONAL TRADE COMMISSION

Office of Investigations, Room 615-B

500 E Street, SW, Washington, DC 20436

So as to be received by the Commission by no later than November 10, 2004

The information called for in this questionnaire is for use by the United States International Trade Commission in connection with its antidumping investigations concerning certain circular welded carbon quality line pipe ("line pipe") from China, Korea, and Mexico (invs. Nos. 731-TA-1073-1075 (Final)). The information requested in the questionnaire is requested under the authority of the Tariff Act of 1930, title VII. This report is mandatory and failure to reply as directed can result in a subpoena or other order to compel the submission of records or information in your possession (19 U.S.C. § 1333(a)).

CERTIFICATION

I certify that the information herein supplied in response to this questionnaire is complete and correct to the best of my knowledge and belief and understand that the information submitted is subject to audit and verification by the Commission.

By signing this certification I also grant consent for the Commission, and its employees and contract personnel, to use the information provided in this questionnaire and throughout these investigations in any other import-injury investigations conducted by the Commission on the same or similar merchandise. (If you do not consent to such use, please note the certification accordingly.)

I acknowledge that information submitted in this questionnaire response and throughout these investigations may be used by the Commission, its employees, and contract personnel who are acting in the capacity of Commission employees, for developing or maintaining the records of these investigations or related proceedings for which this information is submitted, or in internal audits and investigations relating to the programs and operations of the Commission pursuant to 5 U.S.C. Appendix 3. I understand that all contract personnel will sign non-disclosure agreements.

Name and Title of Authorized Official	Date

( )	( )

Signature of Authorized Official	Phone	Fax

Email

PART I.–GENERAL QUESTIONS

The questions in this questionnaire have been reviewed with market participants to ensure that issues of concern are adequately addressed and that data requests are sufficient, meaningful, and as limited as possible. Public reporting burden for this questionnaire is estimated to average 20 hours per response, including the time for reviewing instructions, searching existing data sources, gathering the data needed, and completing and reviewing the questionnaire. Send comments regarding the accuracy of this burden estimate or any other aspect of this collection of information, including suggestions for reducing the burden, to the Office of Investigations, U.S. International Trade Commission, 500 E Street, SW, Washington, DC 20436.

I-1a.	Please report below the actual number of hours required and the cost to your firm of preparing the reply to this questionnaire and completing the form.

hours dollars

I-1b.	We are interested in any comments you may have for improving this questionnaire in general or the clarity of specific questions. Please attach such comments to your response or send them to the above address.

I-2.	Provide the name and address of establishment(s) covered by this questionnaire (see page 3 of the instruction booklet for reporting guidelines). If your firm is publicly traded, please specify the stock exchange and trading symbol.

I-3.	Is your firm owned, in whole or in part, by any other firm?

No	Yes–List the following information.

Extent of

Firm name	Address	ownership

I-4.	Does your firm have any related firms, either domestic or foreign, which are engaged in importing line pipe from China, Korea, and/or Mexico into the United States or which are engaged in exporting line pipe from China, Korea, and/or Mexico to the United States?

No	Yes–List the following information.

Firm name	Address	Affiliation

PART I.–GENERAL QUESTIONS–Continued

I-5.	Does your firm have any related firms, either domestic or foreign, which are engaged in the production of line pipe?

No	Yes–List the following information.

Firm name	Address	Affiliation

I-6.	Please indicate the nature of your firm's importing operations on line pipe. More than one answer may be applicable.

Importer of record	Takes title to the imported product(s)

Consignee of the imported product(s)	Customs broker or freight forwarder

I-7.	If your firm is an importer of record of line pipe but is not the consignee, please list the consignees below (company name, address, telephone, and individual to contact).

I-8.	Please indicate whether your firm enters line pipe into, or withdraws such merchandise from, foreign trade zones or bonded warehouses.

Foreign trade zones	No	Yes

Bonded warehouses	No	Yes

I-9.	Please indicate whether your firm imports line pipe under the TIB (temporary importation under bond) program.

No	Yes

I-10.	To your knowledge, have the products subject to these investigations been the subject of any other import relief investigations in the United States or in any other countries?

No	Yes–Please specify.

PART II.–TRADE AND RELATED INFORMATION

Further information on this part of the questionnaire can be obtained from Fred Ruggles (fred.ruggles@usitc.gov or 202-205-3187). Unless otherwise specified, supply all data requested on a calendar-year basis.

II-1.	Who should be contacted regarding the requested trade and related information?

Company contact:

Name and title

Phone No.	E-mail address

II-2.	Has your firm experienced any plant openings, relocations, expansions, acquisitions, consolidations, closures, or prolonged shutdowns because of strikes or equipment failure, or any other change in the character of your operations or organization relating to the importation of line pipe since January 1, 2001?

No	Yes–Supply details as to the time, nature, and significance of such changes.

II-3.	Please report in the table below the quantity (in short tons) of line pipe from China, Korea, and/or Mexico that your firm has imported or arranged for importation for delivery after September 30, 2004 and into calendar year 2005. Data reported should include welded line pipe over 32 mm (1.25 inches) in nominal diameter (1.660 inch actual outside diameter) and not more than 406.4 mm (16 inches) in outside diameter.

Source

Oct. 2004

Nov. 2004

Dec. 2004

Jan. 2005

Feb. 2005

Mar. 2005	After

Mar. 31, 2005
China
Korea (SeAH)
Korea (all other)
Mexico

II-4.	If your firm also produces line pipe in the United States, please indicate your reasons for importing this product. If your reasons differ by source, please elaborate.

PART II.--TRADE AND RELATED INFORMATION--Continued

II-5.	Comparability of line pipe and standard pipe.–Please describe the differences and similarities between line pipe and standard pipe for the following factors:

(a) physical properties; (b) end uses–include a discussion of the interchangeability of the products in specific, representative end uses and provide an estimate of how often the products actually are used in such applications; (c) channels of distribution--describe the specific customer requirements and channels of distribution through which the products are sold; and (d) price. Please indicate if your response differs for line pipe that is single-certified/stenciled vs. multiple-certified/stenciled and explain how your response would differ for each factor. Use additional pages as necessary.

(a) Physical properties:

(b) End uses:

(c) Channels of distribution/customers:

(d) Price:

PART II.--TRADE AND RELATED INFORMATION--Continued

II-6.	Please discuss the impact of the following developments with respect to your firm's (1) line pipe and (2) standard pipe operations since January 1, 2001 (use additional pages as necessary):

a) the imposition, modification, and termination of the U.S. safeguard tariffs on line pipe--

b) the imposition, modification, and termination of the U.S. safeguard tariffs on standard pipe and other forms of welded tubular products (except OCTG and line pipe)--

c) the imposition, modification, and termination of the U.S. safeguard tariffs on flat-rolled steel--

d) changes in the availability and prices of direct inputs (e.g., hot-rolled steel) and upstream materials (e.g., steel scrap)--

PART II.--TRADE AND RELATED INFORMATION--Continued

II-6.	Please discuss the impact of the following developments with respect to your firm's (1) line pipe and (2) standard pipe operations since January 1, 2001 – Continued

e) the closure or relocation of line pipe capacity in the United States generally as well as on a regional basis (please identify firms and time frames involved)--

f) demand trends among key end users--

g) changes in transportation options and costs (including the availability and expense of rail, truck, and international waterborne transport)--

PART II.–TRADE AND RELATED INFORMATION–Continued

II-7A.	LINE PIPE IMPORTS BY SOURCE.–Report your firm's imports and your firm's shipments and inventories of line pipe imported by your firm during the specified periods. (See definitions in the instruction booklet.) Report separately for China, Korea, and Mexico, as well as for all other countries1 combined. Photocopy as many pages as you need. Data reported should include welded line pipe over 32 mm (1.25 inches) in nominal diameter (1.660 inch actual outside diameter) and not more than 406.4 mm (16 inches) in outside diameter.

China2 Korea (SeAH) Korea (all others)2 Mexico2 All other sources combined

(Quantity in short tons, value in $1,000)
Item	Calendar years	January-September
2001	2002	2003	2003	2004
BEGINNING-OF-PERIOD INVENTORIES (quantity)
IMPORTS:2
Quantity of imports
Value of imports
U.S. SHIPMENTS:
Commercial shipments:
Quantity of commercial shipments
Value of commercial shipments
Internal consumption/company transfers:
Quantity of internal consumption/transfers
Value3 of internal consumption/transfers
EXPORT SHIPMENTS:4
Quantity of export shipments
Value of export shipments
END-OF-PERIOD INVENTORIES5 (quantity)
U.S. SHIPMENTS TO DISTRIBUTORS (quantity)
U.S. SHIPMENTS TO END USERS (quantity)
1 Please identify these sources:

2 Identify the foreign producers, if known:

3 Sales to related firms (including internal consumption) must be valued at fair market value. If you use a different basis for valuing these sales within your company, specify that basis (e.g., cost, cost plus, etc.) and provide value data using that basis for 2001, 2002, and 2003:

4 Identify your principal export markets:

5 Reconciliation of data.-The quantities reported above should reconcile as follows: beginning-of-period inventories, plus imports, less total shipments, equals end-of-period inventories. Do the data reported reconcile?

Yes	No–Please explain:

PART II.–TRADE AND RELATED INFORMATION–Continued

II-7B.	STANDARD PIPE IMPORTS.–Report your firm's imports and your firm's shipments and inventories of standard pipe imported by your firm during the specified periods. (See definitions in the instruction booklet.) Report separately for China, Korea, and Mexico, as well as for all other countries1 combined. Photocopy as many pages as you need.

China2 Korea2 Mexico2 All other sources combined

(Quantity in short tons, value in $1,000)
Item	Calendar years	January-September
2001	2002	2003	2003	2004
BEGINNING-OF-PERIOD INVENTORIES (quantity)
IMPORTS:2
Quantity of imports
Value of imports
U.S. SHIPMENTS:
Commercial shipments:
Quantity of commercial shipments
Value of commercial shipments
Internal consumption/company transfers:
Quantity of internal consumption/transfers
Value3 of internal consumption/transfers
EXPORT SHIPMENTS:4
Quantity of export shipments
Value of export shipments
END-OF-PERIOD INVENTORIES5 (quantity)
U.S. SHIPMENTS TO DISTRIBUTORS (quantity)
U.S. SHIPMENTS TO END USERS (quantity)
1 Please identify these sources:

2 Identify the foreign producers, if known:

3 Sales to related firms (including internal consumption) must be valued at fair market value. In the event that you use a different basis for valuing these sales within your company, please specify that basis (e.g., cost, cost plus, etc.) and provide value data using that basis for 2001, 2002, and 2003 below:

4 Identify your principal export markets:

5 Reconciliation of data.-The quantities reported above should reconcile as follows: beginning-of-period inventories, plus imports, less total shipments, equals end-of-period inventories. Do the data reported reconcile?

Yes	No–Please explain:

PART II.–TRADE AND RELATED INFORMATION–Continued

II.8.	Certain line pipe and standard pipe may be produced from "micro-alloy" steel that has been modified through the addition of alloying elements that may exceed the individual weight limits for nonalloy steel provided for in the HTSUS. (See definitions in the instruction booklet.) Please report below the quantity (in short tons) and value (in $1,000) of any such line pipe or standard pipe included in the data reported by your firm in response to question II.7 above.

(Quantity in short tons, value in $1,000)
Item	Calendar years	January-September
2001	2002	2003	2003	2004
IMPORTS OF "MICRO-ALLOY" STEEL LINE PIPE FROM CHINA
Quantity of imports
Value of imports
IMPORTS OF "MICRO-ALLOY" STEEL LINE PIPE FROM KOREA (SeAH)
Quantity of imports
Value of imports
IMPORTS OF "MICRO-ALLOY" STEEL LINE PIPE FROM KOREA (All others)
Quantity of imports
Value of imports
IMPORTS OF "MICRO-ALLOY" STEEL LINE PIPE FROM MEXICO
Quantity of imports
Value of imports
IMPORTS OF "MICRO-ALLOY" STEEL LINE PIPE FROM ALL OTHER SOURCES
Quantity of imports
Value of imports
IMPORTS OF "MICRO-ALLOY" STEEL STANDARD PIPE FROM CHINA
Quantity of imports
Value of imports
IMPORTS OF "MICRO-ALLOY" STEEL STANDARD PIPE FROM KOREA
Quantity of imports
Value of imports
IMPORTS OF "MICRO-ALLOY" STEEL STANDARD PIPE FROM MEXICO
Quantity of imports
Value of imports
IMPORTS OF "MICRO-ALLOY" STEEL STANDARD PIPE FROM ALL OTHER SOURCES
Quantity of imports
Value of imports

PART II.--TRADE AND RELATED INFORMATION--Continued

II.9.	PROFILE OF LINE PIPE SHIPMENTS: Please report the share (in percent) of your firm's total 2003 U.S. shipments as reported in item II-7A (based on quantity) that was sold as indicated below. Report separately for subject countries and other countries as listed below. Photocopy as many pages as you need.

China Korea (SeAH) Korea (all others) Mexico All other sources combined

A. By certification:

percent	Stenciled to meet only API specifications

percent	Stenciled to API & ASTM specifications

percent	Not stenciled to any specification (describe	)

percent	Other (describe	)*

100	percent	* "Other" might include welded pipe of a kind produced in accordance with API specifications and used for oil and gas pipelines, but stenciled solely to a non-API certification (e.g., ASTM).

B. By grade:

percent	A and A-25 (_____% used in standard applications)

percent	B and X-42 (_____% used in standard applications)

percent	X-46-52 (_____% used in standard applications)

percent	X-60-70 (_____% used in standard applications)

percent	X-80 and above (_____% used in standard applications)

percent	Other (describe )(_____% used in standard applications)

100	percent

C. By size:

percent	Less than or equal to 4.5 inches in outside diameter

percent	Greater than 4.5 inches but less than or equal to 10.75 inches in outside diameter

percent	Greater than 10.75 inches but less than or equal to 16 inches in outside diameter

100	percent

D. By end finish:

percent	Plain end / square cut

percent	Beveled

percent	Threaded or threaded & coupled

percent	Other (describe	)

100	percent

E. By surface finish:

percent	Bare

percent	Lacquered

percent	Other (describe	)

100	percent

F. By length:

percent	Single random lengths (approximately 20 feet)

percent	Double random lengths (approximately 40 feet)

percent	Triple random lengths (approximately 60 feet)

percent	Other (describe	)

100	percent

PART II.--TRADE AND RELATED INFORMATION--Continued

II-14B.	PROFILE OF STANDARD PIPE SHIPMENTS: Please report the share (in percent) of your firm's total 2003 U.S. shipments (based on quantity) that was sold as indicated below.

A. By certification:

percent	Stenciled to meet only ASTM specifications

percent	Stenciled to proprietary specifications (e.g., certain fence tubing)

percent	Not stenciled to any specification (describe	)

percent	Other (describe	)

100	percent

B. By grade:

percent	ASTM A-53A type F

percent	ASTM A-53A type E

percent	ASTM A-53B type E

percent	ASTM A-135/795

percent	ASTM A-500/A-252

percent	Other (describe	)

100	percent

C. By size:

percent	Less than or equal to 4.5 inches in outside diameter

percent	Greater than 4.5 inches but less than or equal to 10.75 inches in outside diameter

percent	Greater than 10.75 inches but less than or equal to 16 inches in outside diameter

100	percent

D. By end finish:

percent	Plain end / square cut

percent	Beveled

percent	Threaded or threaded & coupled

percent	Other (describe	)

100	percent

E. By surface finish:

percent	Bare

percent	Lacquered

percent	Galvanized ( % certified to meet the API 5L specification)

percent	Other (describe	)

100	percent

F. By length:

percent	Single random lengths (approximately 20 feet)

percent	Double random lengths (approximately 40 feet)

percent	Triple random lengths (approximately 60 feet)

percent	Other (describe	)

100	percent

PART III.–PRICING AND RELATED INFORMATION

Further information on this part of the questionnaire can be obtained from Selam Legesse (202-205-3493).

III-1.	Who should be contacted regarding the requested pricing and related information?

Company contact:

Name and title

Phone No.	E-mail address

Section III-A.–PRICE DATA

This section requests quarterly price and quantity data, f.o.b. your U.S. point of shipment, concerning your firm's U.S. commercial shipments to unrelated U.S. customers of the line pipe products listed below imported from China, Korea, and Mexico during January 2001-September 2004.

Product 1.--API 5L B welded pipe, 4 inch nominal size (4.5 inch outside diameter), plain end with wall thickness of 0.237 inch.

Product 2.–API 5L B welded pipe, 8 inch nominal size (8 5/8 inch outside diameter), plain end with wall thickness of 0.250 inch

Product 3.–API 5L B welded pipe, 12 inch nominal size (12.75 inch outside diameter), plain end with wall thickness of 0.375 inch.

Product 4.–API 5L B welded pipe, 6 inch nominal size (6 5/8 inch outside diameter), plain end with wall thickness of 0.280 inch.

Product 5.–API 5L X42 welded pipe, 4.5 inch outside diameter, black plain end with wall thickness of 0.188 inch.

Product 6.–ASTM A53B welded pipe, 4 inch nominal size (4.5 inch outside diameter), black plain end with wall thickness of 0.237 inch.

Please note that total dollar values should be f.o.b., U.S. point of shipment and should not include U.S.-inland transportation costs. Total dollar values should reflect the FINAL NET amount paid to you (i.e., should be net of all deductions for discounts or rebates). See instruction booklet.

Section III-A.–PRICE DATA–Continued

COPY THIS PAGE AS NECESSARY. Complete a separate page for each of the specified products1 imported from China, Korea, and Mexico and sold by your firm. Also complete a separate page for each subject country you import from.

China Mexico Korea (SeAH) Korea (All others)

Product 1 Product 2 Product 3 Product 4 Product 5 Product 6

(Quantity in short tons, value in dollars)
Period of shipment	Quantity	Value2
2001:
January-March
April-June
July-September
October-December
2002:
January-March
April-June
July-September
October-December
2003:
January-March
April-June
July-September
October-December
2004:
January-March
April-June
July-September
1 If your product does not exactly meet the product specifications but is competitive with the specified product, provide a description of your product:

2 Net values (i.e., gross sales values less all discounts, allowances, rebates, prepaid freight, and the value of returned goods), f.o.b. your U.S. point of shipment.

PART III.–PRICING AND RELATED INFORMATION–Continued

Section III-B.--PRICE-RELATED QUESTIONS

III-B-1.	Please describe how your firm determines the prices that it charges for sales of line pipe (transaction by transaction negotiation, contracts for multiple shipments, set price lists, etc.). If your firm issues price lists, please include a copy of a recent price list with your submission. If your price list is large, please submit sample pages.

III-B-2.	Please describe your firm's discount policy (quantity discounts, annual total volume discounts, etc.).

III-B-3.	Please indicate your firm's typical sales terms for line pipe imported from China, Korea, and Mexico (e.g., 2/10 net 30 days) and the basis on which your prices of such product are usually quoted (e.g., f.o.b. port of entry, or delivered).

Item	China	Korea (SeAH)	Korea (All others)	Mexico
Sales terms
Basis of quote

III-B-4.	Please indicate the approximate share of your firm's sales of its line pipe imported from China, Korea, and Mexico in 2003 that were on a (1) long-term contract basis (multiple deliveries for more than 12 months), (2) short-term contract basis (multiple deliveries up to 12 months), and (3) spot sales basis (for a single delivery).

Type of sale	Share of sales (percent)
China	Korea (SeAH)	Korea (All others)	Mexico
Long-term contracts
Short-term contracts
Spot sales
Total	100%	100%	100%	100%

III-B-5.	If you sell on a long-term contract basis, please answer the following questions with respect to provisions of a typical long-term contract.

(a) What is the average duration of a contract?

(b) Can prices be renegotiated during the contract period?

(c) Does the contract fix quantity, price, or both?

(d) Does the contract have a meet or release provision?

PART III.--PRICING AND RELATED INFORMATION--Continued

Section III-B.--PRICE-RELATED QUESTIONS

III-B-6.	If you sell on a short-term contract basis, please answer the following questions with respect to provisions of a typical short-term contract.

(a) What is the average duration of a contract?

(b) Can prices be renegotiated during the contract period?

(c) Does the contract fix quantity, price, or both?

(d) Does the contract have a meet or release provision?

III-B-7.	What is the average lead time between a customer's order and the date of delivery for your firm's sales of line pipe?

Source	Share of 2003 sales	Lead time
From inventory
Produced to order
Total	100%

III-B-8.	(a) What is the approximate percentage of the total delivered cost of line pipe that is accounted for by U.S. inland transportation costs? percent.

(b) Who generally arranges the transportation to your customers' locations? Your firm or purchaser (check one).

(c) What proportion of your sales occur within 100 miles of your storage or production facility? %. 101 to 1,000 miles? %. Over 1,000 miles? %.

III-B-9.	What is the geographic market area in the United States served by your firm's line pipe?

□ Northeast	□ Midwest	□ Central Southwest	□ Southeast

□ Mountains	□ Pacific Coast	□ Contiguous U.S.	□ Other (list below)

III-B-10.	Describe the principal end uses of the single-certified line pipe and/or multiple-certified line pipe that you import from China, Mexico, and/or Korea. For each end-use product, please provide the percentage of the total cost accounted for by line pipe.

Type of line pipe

End use	Share of total cost accounted for by line pipe (percent)
Single-certified line pipe
Multiple-certified

line pipe

PART III.--PRICING AND RELATED INFORMATION--Continued

Section III-B.--PRICE-RELATED QUESTIONS--Continued

III-B-11.	(a) Please list in order of importance any products that may be substituted for single-certified line pipe and multiple-certified line pipe.

Single-certified line pipe	Multiple-certified line pipe
1.	1.
2.	2.
3.	3.

(b) For each possible substitute product, please give examples of applications and end uses for which they are substitutes.

(c) Have changes in the prices of these products affected the price for line pipe?

No	Yes–To what degree do changes in their prices affect the price for line pipe? Does this effect have a time lag? If so, how long is the time lag for each substitute product? Does this vary by type of line pipe or final end use?

III-B-12.	How has the demand within the United States (and outside the United States if known) for line pipe changed since January 1, 2001? What principal factors affect changes in demand?

□ Increased	□ Unchanged	□ Decreased

III-B-13.	Have there been any significant changes in the product range or marketing of line pipe since January 1, 2001?

No	Yes--Please describe.

PART III.--PRICING AND RELATED INFORMATION--Continued

Section III-B.--PRICE-RELATED QUESTIONS--Continued

III-B-14.	Describe your expectations for continuation of current trends in supply, demand, and prices in the U.S. line pipe market for the fourth quarter of 2004 and calendar year 2005. Please submit copies of any forecasts you have and provide an explanation of the reasons for the current and expected future developments. Please specify whether these forecasts are based on the expectation of antidumping duty orders.

III-B-15.	Does your firm sell line pipe over the internet?

No	Yes–Please describe, noting the estimated percentage of your firm's total sales of line pipe in 2003 accounted for by internet sales.

PART III.--PRICING AND RELATED INFORMATION--Continued

Section III-B.--PRICE-RELATED QUESTIONS--Continued

III-B-16. Is line pipe produced in the United States and in other countries interchangeable (i.e., can they physically be used in the same applications)? Please indicate below, using "A" to indicate that the products from a specified country-pair are always interchangeable, "F" to indicate that the products are frequently interchangeable,"S" to indicate that the products are sometimes interchangeable,"N" to indicate that the products are never interchangeable, and "0" to indicate no familiarity with products from a specified country-pair.1
Country-pair	United States	China	Mexico	Korea	Other countries
United States
China
Mexico
Korea
1 For any country-pair producing line pipe which is sometimes or never interchangeable, please explain the factors that limit or preclude interchangeable use:

PART III.--PRICING AND RELATED INFORMATION--Continued

Section III-B.--PRICE-RELATED QUESTIONS--Continued

III-B-17. Are differences other than price (i.e., quality, availability, transportation network, product range, technical support, etc.) between line pipe produced in the United States and in other countries a significant factor in your firm's sales of the products? Please indicate below, using "A" to indicate that such differences are always significant, "F" to indicate that such differences are frequently significant,"S" to indicate that such differences are sometimes significant,"N" to indicate that such differences are never significant, and "0" to indicate no familiarity with products from a specified country-pair.1
Country-pair	United States	China	Mexico	Korea	Other countries
United States
China
Mexico
Korea
1 For any country-pair for which factors other than price always or frequently are a significant factor in your firm's sales of line pipe, identify the country-pair and report the advantages or disadvantages imparted by such factors:

PART III.–PRICING AND RELATED INFORMATION–Continued

Section III-C.–CUSTOMER IDENTIFICATION

Please provide the names and addresses of your firm's 10 largest customers for line pipe imported from China, Mexico, or Korea during 2001-2003. Please also provide the name and telephone number of a contact person and the share of the quantity of your firm's total imports of line pipe from China, Mexico, or Korea that each of these customers accounted for in 2003. Report separately for each country listed on page 1 of the questionnaire. Photocopy as many pages as you need and identify the country for which you are reporting.

Country:

No.	Customer's name	Street address (not P.O. box), state, and zip code	Contact person	Area code and telephone number	Share of 2003 sales (%)

1

2

3

4

5

6

7

8

9

10