|
Ballot Number/Title
|
Impact Statement
|
Approval
Date
|
Implementation
Date |
|
169, Chapter 9, Slings, D/d Ratio
|
Ballot 169 approves adding the D/d ratio chart to Chapter 9, Slings, now that the chart is no longer published in ASME B30.9, as well as adding language to clarify the application of the D/d ratio.
|
August 23, 2012
|
September 25, 2012
|
|
168, Chapter 1, Scope
|
Ballot 168 approves the update to Chapter 1, Scope. This ballot will update the list of ASME B30 standards not addressed in specific chapters of the Hanford Site Hoisting & Rigging Manual as well as directing attention to the application of OSHA 1926 requirements and addressing rigging equipment that is used in an application than the application for which it was manufactured.
|
August 23, 2012
|
September 25, 2012
|
|
167, Chapter 4, Qualification and Training Requirements, BTH Training
|
Ballot 167 approves the addition of wording in Chapter 4, Qualification and Training Requirements, addressing training elements in ASME B30.20 for personnel using below-the-hook lifting devices.
|
August 16, 2012
|
September 25, 2012
|
|
166, Chapter 4,Qualification and Training Requirements, Documentation of On-the-Job Training
|
Ballot 166 approves the addition of wording in Chapter 4, Qualification and Training Requirements, requiring documentation of completion, or bypassing, of on-the-job training that is currently in Chapter 4.
|
August 16, 2012
|
September 25, 2012
|
|
165, Adoption of the Current Volume of ASME B30.23-2011
|
Ballot 165 adopts the current volume of ASME B30.23-2011, Personnel Lifting Systems, in the Hanford Site Hoisting & Rigging Manual.
|
July 16, 2012
|
August 15, 2012
|
|
164, Adoption of the Current Volume of ASME B30.5-2011
|
Ballot 164 adopts the current volume of ASME B30.5-2011, Mobile & Locomotive Cranes, in the Hanford Site Hoisting & Rigging Manual.
|
July 16, 2012
|
August 15, 2012
|
|
163, Adoption of the Current Volume of ASME B30.11-2011
|
Ballot 163 adopts the current volume of ASME B30.11-2010, Monorails and Underhung Cranes, in the Hanford Site Hoisting & Rigging Manual.
|
July 16, 2012
|
August 15, 2012
|
|
162, Adoption of the Current Volume of ASME B30.2-2011
|
Ballot 162 adopts the current volume of ASME B30.2-2011, Overhead and Gantry Cranes, in the Hanford Site Hoisting & Rigging Manual.
|
July 16, 2012
|
August 15, 2012
|
|
161, Attachments Chapter: Freight Container Lifting Standard
|
Ballot 161 added criteria in Attachment 1, Freight Container Lifting Standard, to address movement of freight containers without fork pockets, with a forklift, when residing/stored in the prohibited zone as defined in DOE-0359, Hanford Site Electrical Safety Program.
|
May 1, 2012
|
May 10, 2012
|
|
160, Scope
|
Ballot 160 clarified wording in Chapter 1, Introduction, Section 1.2, Scope, of the Hanford Site Hoisting and Rigging Manual (HSHRM) to ensure activities being performed for the Department of Energy (DOE) are performed in a safe and cost-effective manner. The HSHRM implements American Society of Mechanical Engineers (ASME) consensus and Occupations Safety and Health Administration (OSHA) standards to ensure the safety of hoisting and rigging operations to minimize risk to personnel and the public. Whether activities are performed by prime or subcontractors for DOE, on-site or off, the same approved level of safety standard and requirements should be maintained.
|
May 1, 2012
|
May 10, 2012
|
|
158, Termination of Controlled Hard Copies of the HSHRM
|
Ballot 158 approved the termination of the production of controlled hard copies of the Hanford Site Hoisting & Rigging Manual (HSHRM). The HSHRM is available on the intranet and internet and can be downloaded and printed for those who wish to maintain a hard copy. This change will allow the immediate publication of approved ballots rather than the current practice of waiting several months to gather ballots to perform a controlled hard copy release. The change will result in a cost savings and ensure each ballot is published upon approval on the intranet and internet, reducing the current lag time between approval and publication of the change.
|
April 12, 2012
|
April 12, 2012
|
