Jump to main content.

PCBs in Caulk in Older Buildings

You will need Adobe Reader to view some of the files on this page. See EPA's PDF page to learn more.
PCBs in Caulk Hotline

For additional information call
1-888-835-5372

Highlights

PCB Guidance Reinterpretation

Important Resources

Page Contents

Overview

In recent years, EPA has learned that caulk containing potentially harmful polychlorinated biphenyls (PCBs) was used in many buildings, including schools, in the 1950s through the 1970s. In general, schools and buildings built after 1978 do not contain PCBs in caulk. On September 25, 2009, EPA announced new guidance for school administrators and building managers with important information about managing PCBs in caulk and tools to help minimize possible exposure. Through EPA's Regional PCB Coordinators, the Agency will also assist communities in identifying potential problems and, if necessary, developing plans for PCB testing and removal. The Agency has prepared a a Fact Sheet (PDF) (2 pp, 26K, About PDF) and Questions and Answers (PDF) (11 pp, 63K, About PDF) on this announcement.

The EPA also announced additional research into this issue. There are several unresolved scientific questions that must be better understood to assess the magnitude of the problem and identify the best long-term solutions. For example, the link between the concentrations of PCBs in caulk and PCBs in the air or dust is not well understood. The Agency is doing research to determine the sources and levels of PCBs in schools and to evaluate different strategies to reduce exposures. The results of this research will be used to provide further guidance to schools and building owners as they develop and implement long-term solutions. Read more about Research on PCBs in Caulk.

EPA has calculated prudent public health levels that maintain PCB exposures below the “reference dose” – the amount of PCB exposure that EPA does not believe will cause harm. Read Public Health Levels for PCBs in Indoor School Air || PDF version (2 pp, 14K, About PDF).

Background

Caulk is a flexible material used to seal gaps to make windows, door frames, masonry and joints in buildings and other structures watertight or airtight. At one time caulk was manufactured to contain PCBs because PCBs imparted flexibility.

First Step: Take Steps to Minimize Exposure

Although this is a serious issue, the potential presence of PCBs in schools and buildings should not be a cause for alarm. If your school or building was built or renovated between 1950 and 1978, there are several immediate, relatively low cost steps schools can take to reduce potential exposure until it can be determined with certainty if PCBs are present in caulk used in the building and any contaminated caulk can be removed. Those steps include:

EPA also has developed an informational brochure to provide the general public with important information on PCBs in building caulk, Preventing Exposure to PCBs in Caulking Material || PDF version, EPA Publication EPA-747-F-09-005 (4 pp, 2.7MB, About PDF).

Top of Page

Testing

Air

If school administrators and building owners are concerned about potential PCBs in the caulk, they should consider testing to determine if PCBs are present in the air. If testing reveals PCB levels above the levels EPA has determined to be safe, schools should attempt to identify any potential sources of PCBs that may be present in the building, including testing samples of caulk and looking for other potential PCB sources (e.g., old transformers, capacitors, or fluorescent light ballasts that might still be present at the school).

If elevated air levels of PCBs are found, schools should also have the ventilation system evaluated to determine if it is contaminated with PCBs. Although the ventilation system is unlikely to be an original source of PCB contamination, it may have been contaminated before other sources of PCBs were removed from the school and may be contributing to elevated air levels. Contaminated ventilation systems should be carefully cleaned.  Ideally, such cleaning should be planned in concert with removal of any sources of PCBs that are found to avoid re-contamination of the system.

During the search for potential sources, schools should be especially vigilant in implementing practices to minimize exposures and should retest to determine whether those practices are reducing PCB air levels.

Other Sources, Including Caulk

Should those practices not reduce exposure, caulk and other known sources of PCBs should be removed as soon as practicable. Caulk that is peeling, brittle, cracking or deteriorating visibly will have the highest potential for release of PCBs into air. EPA recommends that deteriorating caulk be tested directly for the presence of PCBs and removed if PCBs are present at significant levels.

Where schools or other buildings were constructed or renovated between 1950 and 1978, EPA recommends that PCB-containing caulk be removed during planned renovations and repairs (when replacing windows, doors, roofs, ventilation, etc.) It is critically important to assure that PCBs are not released to air during replacement or repair of caulk in affected buildings. Assessment of the ventilation system for potential contamination, proper cleaning when required, and isolation of the system to prevent further contamination are also important.

Test Methods

For determining the presence of PCBs in indoor air, EPA has two approved methods:

EPA recommends that deteriorating caulk be tested directly for the presence of PCBs and removed if PCBs are present at significant levels. The PCB regulations provide appropriate methods for testing. More information on these procedures can be found at:

Contact EPA's PCBs in Caulk Hotline at 1-888-835-5372 or the EPA Regional PCB Coordinator for your state for assistance and help in finding a chemical analysis laboratory in your area.

Schools Information Kit

A Schools Information Kit provides information for parents, students and staff about PCBs in caulk, including:

Information for Contractors Working in Older Buildings

Read Contractors Handling PCBs in Caulk During Renovation || PDF version, EPA Publication EPA-747-F-09-004 (4 pp, 1.9MB), EPA's guidance to contractors and maintenance personnel working in older buildings that may contain PCB-contaminated caulk.

Read EPA's Steps to Safe Renovation and Abatement of Buildings that Have PCB-Containing Caulk.

Additional Information

Additional EPA brochures and fact sheets on best practices for addressing PCBs in caulk:

Where Can I Get More Information?

For more information on how to properly test for and address PCBs in caulk, call the EPA's PCBs in Caulk Hotline at 1-888-835-5372 or contact the EPA Regional PCB Coordinator for your state.

Top of Page

Local Navigation

Jump to main content.