![arrow](https://webarchive.library.unt.edu/web/20121008025725im_/http://www.trade.gov/images/bullet_arrow.jpg)
Committees
- Industry Trade Advisory Committees
- Committee of Chairs of the Industry Trade Advisory Committees
- Aerospace Equipment
(ITAC 1) - Automotive Equipment and Capital Goods
(ITAC 2) - Chemicals, Pharmaceuticals, Health/Science Products and Services
(ITAC 3) - Consumer Goods
(ITAC 4) - Distribution Services
(ITAC 5) - Energy and Energy Services
(ITAC 6) - Forest Products
(ITAC 7) - Information and Communications Technologies, Services, and Electronic Commerce
(ITAC 8) - Non-Ferrous Metals and Building Materials
(ITAC 9) - Services and Finance Industries
(ITAC 10) - Small and Minority Business
(ITAC 11) - Steel
(ITAC 12) - Textiles and Clothing
(ITAC 13) - Customs Matters and Trade Facilitation
(ITAC 14) - Intellectual Property Rights
(ITAC 15) - Standards and Technical Trade Barriers
(ITAC 16)
Become an Advisor
Advisors have direct access to policymakers at Commerce Department and the Office of USTR. In such capacity advisors assist in developing industry positions on U.S. trade policy and negotiating objectives.
The role of our private-sector advisors is increasing as the Administration pursues a number of multilateral, regional, and bilateral trade negotiations.
Membership
ITAC members are appointed jointly by the Secretary of Commerce and the United States Trade Representative (USTR). Appointments are made at the re-chartering of each ITAC and periodically throughout the two-year charter period. Members serve at the discretion of the Secretary and the USTR. Appointments to the ITACs expire at the end of the ITACs' charter term (duration is two-years); however, members may be re-appointed should the charters of the ITACs be renewed, if the member proves to work effectively with the ITAC, and his/her participation is still needed. Members are not compensated for their services or reimbursed travel expenses.
Appointments to all ITACs are made without regard to political affiliation.
All ITAC members must have a Department of Commerce Security Clearance up to the SECRET level because they will have access to classified trade-related information. If a nominee currently has a security clearance from another Federal agency, please notify the Industry Trade Advisory Center.
Under the Federal Advisory Committee Act (FACA), each Committee is allowed the maximum of 50 members. Commerce and USTR set the number allowed in the charters of each Committee of each Committee. At the start of a charter term, each Committee holds elections for Chair and Vice Chair(s). The elected Chair becomes part of the Committee of Chairs.
Eligibility
Eligibility to serve on an ITAC is limited to U.S. citizens who are not full-time employees of a governmental entity, who represent a U.S. entity, and who are not registered with the Department of Justice under the Foreign Agents Registration Act.
Represent a U.S. entity: While Committee members are expected to provide advice to the U.S. Government as representatives of their industry sector, each member must also serve, directly or indirectly, as the representative of a U.S. entity that trades internationally and is engaged in the manufacture of a product or the provision of a service (including retailing and other distribution services), or an association of such entities. This entity will generally be the member's employer or company, but may also be his or her client.
U.S. entity: For purposes of the preceding paragraph, a U.S. entity is a firm incorporated in the United States (or an unincorporated U.S. firm with its principal place of business in the United States) that is controlled by U.S. citizens or by another U.S. entity. An entity is not a U.S. entity if 50 percent plus one share of its stock (if a corporation, or a similar ownership interest of an unincorporated entity) is controlled, directly or indirectly, by non-U.S. citizens or non-U.S. entities. If the member is to represent an entity or corporation with 10 percent or greater non-U.S. ownership, the nominee must demonstrate at the time of nomination that this ownership interest does not constitute control and will not adversely affect his or her ability to serve as a trade advisory to the United States (see Nominations below).
Trades Internationally: An entity that trades internationally is an entity directly engaged in the import or export of goods or that sells its services abroad, or represents an entity that provides services in direct support of the international trading activities of other entities.
Selection Criteria
The Secretary of Commerce and the USTR will select eligible individuals for appointment to Committee membership based upon the following criteria:
1. Industry Representation and Individual Knowledge:
Members are selected to represent their sponsoring U.S. entity's interests on trade matters. A secondary consideration is members' knowledge and expertise of their industry and of trade matters relevant to the work of the Committee.
2. Balanced Industry Representation; Diversity:
(a) The USTR and the Secretary will make every effort to maintain balanced industry representation on each Committee and among Committees. In order to achieve balanced representation, consideration will be given to balance among sectors, product lines, small, medium, and large firms, and geographic areas. In addition, the USTR and the Secretary are committed to achieving diversity in the membership of the Committees to the maximum extent practicable consistent with the need for balanced industry representation and expertise. The USTR and the Secretary may seek additional nominations as necessary to ensure balanced representation, to meet a need for special representation, or to achieve diversity and demographic balance. A U.S. entity may not be represented by more than one member on a Committee, except in rare circumstances to permit adequate representation of a discrete industry subsector or interest. In general, a U.S. entity may not be represented on more than three Committees.
(b) The USTR and the Secretary may from time to time appoint individuals representing U.S. non-governmental organizations to one or more Committees. Such individuals must meet the eligibility requirements set forth above, and represent a U.S. entity interested in issues relevant to the work of the committee. For purposes of the preceding sentence, a ''U.S. entity'' is an organization incorporated in the United States (or, if unincorporated, having its headquarters in the United States): (1) that is controlled by U.S. citizens or by another U.S. entity. An entity is not a U.S. entity if more than 50 percent of its Board of Directors or membership is made up of non-U.S. citizens. If the nominee is to represent an organization more than 10 percent of whose Board of Directors or membership is made up of non-U.S. citizens, or non-U.S. entities, the nominee must demonstrate at the time of nomination that this non-U.S. interest does not constitute control and will not adversely affect his or her ability to serve as a trade advisor to the United States; and (2) at least 50 percent of whose annual revenue is attributable to non-governmental U.S. sources.
Nomination Process
Nominations should include the following information:
1. a sponsor letter, which must be on company/organization letterhead (interested parties may also nominate themselves, on either company/organization letterhead or personal letterhead), with a statement regarding the nominee's international trade expertise and qualifications to represent the relevant industry sector;
2. a resume, with demonstrated knowledge of international trade as relevant to the work of the committee; and
3. company or organization information (if consultant, legal advisor, or trade association, a membership list or client list must be included).
Other information should include the activities, products or services of the U.S. entity to be represented, in addition to the following information, as appropriate:
1. Certification of U.S. Entity
The nomination must include a certification that entity to be represented by the nominee is a U.S. entity (see section II.A, above). If the U.S. entity to be represented is more than ten percent foreign-owned, the nominator must demonstrate to the satisfaction of the Secretary and the USTR that the foreign ownership does not constitute control of the U.S. entity and will not adversely affect the nominee's ability to serve as a trade advisor to the United States.
2. Identification of Interests Represented by Trade Association Representatives, Consultants, and Legal Advisors
In order that the Secretary and the USTR may properly discharge the responsibility of ensuring balanced industry representation on the Committees, nominations of individuals who are trade association employees or representatives, consultants, or legal advisors shall include the following information:
(a) If the nominee is a trade association employee or representative, the nomination shall identify all the members of the association, the percentage of the association's membership that consists of non-U.S. entities (see section II.A.2, above), and the association member(s) to be represented by the nominee (if fewer than all the members).
(b) If the nominee is a consultant or legal advisor; the nomination shall identify:
(i) the U.S. entity or entities to be represented. Each entity so identified must furnish with the nomination a written certification by a responsible official of that entity or entities that the nominee will represent it on the Committee;
(ii) any current business arrangements relevant to, and clients of the nominee that may have an interest in, the work of the Committee; and
(iii) the extent to which personal or company/firm income is derived from non-U.S. citizens or entities.
Note: Committee membership lists (which are routinely made available to the public) will indicate only the name of the members' industry affiliation and/or the entity(ies) represented. Membership lists will not reveal members' other business arrangements or clients. However, this information will be made available in aggregated form to other members of the relevant Committee so that they may be aware of the interests of other Committee members.
Nominations are reviewed initially for completeness, and to determine the eligibility of the nominee, by the Industry Trade Advisory Center. Nominations of eligible candidates are then reviewed jointly by the Department of Commerce and USTR in light of the selection criteria set out above. This review includes input from the Designated Federal Officer of the relevant committee, the relevant Deputy Assistant Secretary and Office Director, and officials of the Office of the USTR.
The above information should be sent to:
Director
Industry Trade Advisory Center
U.S. Department of Commerce
Room 4043
Washington, D.C. 20230
E-mail: trade_advisory_center@ita.doc.gov
![divider](https://webarchive.library.unt.edu/web/20121008025725im_/http://www.trade.gov/images/2p_temp_5.1links/divider.jpg)
The International Trade Administration, U.S. Department of Commerce, manages this global trade site to provide access to ITA information on promoting trade and investment, strengthening the competitiveness of U.S. industry, and ensuring fair trade and compliance with trade laws and agreements. External links to other Internet sites should not be construed as an endorsement of the views or privacy policies contained therein. This site contains PDF documents. A PDF reader is available from Adobe Systems Incorporated.