§ 52.6 Completeness and accuracy of information.
(a) Information provided to the Commission by a licensee (including an early site permit holder, a combined license holder, and a manufacturing license holder), a holder of a standard design approval under this part, and an applicant for a license or an applicant for a standard design certification or a standard design approval under this part, and information required by statute or by the Commission's regulations, orders, license conditions, or terms and conditions of a standard design approval to be maintained by the licensee, the holder of a standard design approval under this part, the applicant for a standard design certification under this part following Commission adoption of a final design certification rule, and an applicant for a license, a standard design certification, or a standard design approval under this part shall be complete and accurate in all material respects.
(b) Each applicant or licensee, each
holder of a standard design approval
under this part, and each applicant for
a standard design certification under
this part following Commission
adoption of a final design certification
regulation, shall notify the Commission
of information identified by the
applicant or the licensee as having for
the regulated activity a significant
implication for public health and safety
or common defense and security. An
applicant, licensee, or holder violates
this paragraph only if the applicant,
licensee, or holder fails to notify the
Commission of information that the
applicant, licensee, or holder has been
identified as having a significant
implication for public health and safety
or common defense and security.
Notification shall be provided to the
Administrator of the appropriate
Regional Office within 2 working days
of identifying the information. This
requirement is not applicable to
information which is already required to
be provided to the Commission by other
reporting or updating requirements.
[72 FR 49521, Aug. 28, 2007]