Manufacturing Programs & Projects | |
Nanostructure Fabrication Processes
Last Updated Date: 10/05/2012 In this project we are developing in situ measurements relevant to the electrochemical fabrication, processing, and application of nanostructured … more
Marciniak Mechanical Testing
Last Updated Date: 10/05/2012 A novel method for measuring multiaxial stress-strain curves in sheet metal has been designed based on a modified Marciniak punch stretching … more
Ceramic Phase Equilibrium Data
Last Updated Date: 10/05/2012 Our objective is to compile, evaluate, determine, and disseminate phase equilibrium data to facilitate and optimize the development, processing, … more
Crystallographic Databases
Last Updated Date: 10/05/2012 Our objective is to provide critically evaluated, comprehensive crystal structure databases to enable materials identification required for the … more
Diffraction Metrology and Standards
Last Updated Date: 10/05/2012 Our objective is the development of Standard Reference Materials (SRMs) and quantitative, reproducible, and accurate measurement methods for … more
Thin Film X-Ray Reflectometry
Last Updated Date: 10/05/2012 Our goal is to develop Standard Reference Materials (SRMs) and quantitative, reproducible X-ray reflectometry (XRR) data analysis methods to … more
Yield Surface Measurement
Last Updated Date: 10/04/2012 In order to calculate the stresses that develop within a formed part, and thereby compensate for such things as elastic springback, it is … more
Crystal Plasticity Modeling
Last Updated Date: 10/04/2012 Crystal Plasticity Modeling calculates multiaxial mechanical constitutive behavior by treating the sample as an interacting aggregate of single … more
Nanoscale Stress Measurements and Standards
Last Updated Date: 10/04/2012 Our objective is to develop accurate measurement methods for the nanoscale stress distributions and surface defects that control device … more
Polymer Microspheres By Annular Co-Flow Extrusion
Last Updated Date: 10/02/2012 Well characterized test materials are essential for validating the performance of trace explosive detection systems. Particle size, chemical … more
NIST Center for Automotive Lightweighting
Last Updated Date: 10/02/2012 Our objective is to develop the measurement methodology, standards and analysis necessary for the US auto industry and base metal suppliers to … more
Characterization of 3D Photovoltaics
Last Updated Date: 10/02/2012 Our goal is to provide industry with test structures and models of next-generation photovoltaics, with an initial focus on cadmium telluride … more
COMPLETED: Dimensional Metrology for Nanoscale Patterns
Last Updated Date: 10/02/2012 Our goal is to develop and demonstrate precise measurement methods that quantify the physical shape, critical dimensions (CD) and … more
Metrology for Nanoimprint Lithography
Last Updated Date: 10/02/2012 Our goal is to develop, advance, and demonstrate measurements that facilitate Nanoimprint Lithography (NIL) as a viable technology for the … more
Cruciform Multiaxial Testing
Last Updated Date: 10/01/2012 The cruciform mechanical test is widely used to measure the multiaxial deformation behavior of materials. Standardization of this … more |
Contact
General Information:301-975-NIST (6478) inquiries@nist.gov 100 Bureau Drive, Stop 1070 Gaithersburg, MD 20899-1070 |