Office of Information and Public Affairs | Washington, DC 20207 |
FOR IMMEDIATE RELEASE | |
January 15, 1985 | |
Release # 85-002 |
The blade will come off if the brushcutter head if not properly aligned with the drive plate or if the retaining bolt is not tight. Only those brushcutter/trimmers identified under the trade name of K & S Industries, Models No. Trim-All TA-1200, TA-1200X, Combo 87-1633, and Estate Trimmer E-1200 are subject to the repair program. The model numbers may be found on a decal located in the middle of the shaft and the brand name may be found on the engine frame above the starter pull handle. The names Cosco, Inc. and K&S appear in the owner's manual. All of the brushcutter/trimmers have a red engine, chrome handle, and black plastic lower guard.
The product sold nationwide by K & S Industries from February 1, 1982 to August 9, 1984 through a variety of stores for approximately $189.95.
K & S Industries is providing a free replacement kit to all owners of the affected brushcutter/trimmers. The kit consists of a blade assembly, bolt, Allen wrench, and instruction sheet. Consumers may continue to use the string trimmer attachment but are warned not to use the brushcutter attachment until the parts in the replacement kit have been installed. The replacement bolt is a special bolt made for this application and should not be replaced with a substitute. Consumers are urged to retighten the blade retaining bolt before each use and, during use to stop, turn off the unit, and check it periodically.
Consumers may receive a free replacement kit by calling
Cosco Customer Service Department, collect at 812-372-2154 be-
tween 8:30 a.m. and 4:00 p.m., Eastern Standard Time, Monday
through Friday or write to K & S Industries, Division of Cosco,
Inc., 2525 State Street, Columbus, Indiana 47201, Attention:
Customer Service Department.